aboutsummaryrefslogtreecommitdiff
path: root/linux-user/arm
AgeCommit message (Collapse)Author
2017-10-16linux-user: Tidy and enforce reserved_va initializationRichard Henderson
We had a check using TARGET_VIRT_ADDR_SPACE_BITS to make sure that the allocation coming in from the command-line option was not too large, but that didn't include target-specific knowledge about other restrictions on user-space. Remove several target-specific hacks in linux-user/main.c. For MIPS and Nios, we can replace them with proper adjustments to the respective target's TARGET_VIRT_ADDR_SPACE_BITS definition. For ARM, we had no existing ifdef but I suspect that the current default value of 0xf7000000 was chosen with this in mind. Define a workable value in linux-user/arm/, and also document why the special case is required. Signed-off-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20170708025030.15845-3-rth@twiddle.net> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-09-22linux-user: fix TARGET_NR_selectLaurent Vivier
TARGET_NR_select can have three different implementations: 1- to always return -ENOSYS microblaze, ppc, ppc64 -> TARGET_WANT_NI_OLD_SELECT 2- to take parameters from a structure pointed by arg1 (kernel sys_old_select) i386, arm, m68k -> TARGET_WANT_OLD_SYS_SELECT 3- to take parameters from arg[1-5] (kernel sys_select) x86_64, alpha, s390x, cris, sparc, sparc64 Some (new) architectures don't define NR_select, 4- but only NR__newselect with sys_select: mips, mips64, sh 5- don't define NR__newselect, and use pselect6 syscall: aarch64, openrisc, tilegx, unicore32 Reported-by: Timothy Pearson <tpearson@raptorengineering.com> Reported-by: Allan Wirth <awirth@akamai.com> Suggested-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-09-21linux-user: Use correct target SHMLBA in shmat()Peter Maydell
The shmat() handling needs to do target-specific handling of the attach address for shmat(): * if the SHM_RND flag is passed, the address is rounded down to a SHMLBA boundary * if SHM_RND is not passed, then the call is failed EINVAL if the address is not a multiple of SHMLBA Since SHMLBA is target-specific, we need to do this checking and rounding in QEMU and can't leave it up to the host syscall. Allow targets to define TARGET_FORCE_SHMLBA and provide a target_shmlba() function if appropriate, and update do_shmat() to honour them. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-07-12Clean up ill-advised or unusual header guardsMarkus Armbruster
Cleaned up with scripts/clean-header-guards.pl. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-07-12linux-user: Clean up target_structs.h header guardsMarkus Armbruster
These headers all use TARGET_STRUCTS_H as header guard symbol. Reuse of the same guard symbol in multiple headers is okay as long as they cannot be included together. Since we can avoid guard symbol reuse easily, do so: use guard symbol $target_TARGET_STRUCTS_H for linux-user/$target/target_structs.h. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-07-12linux-user: Clean up target_signal.h header guardsMarkus Armbruster
These headers all use TARGET_SIGNAL_H as header guard symbol. Reuse of the same guard symbol in multiple headers is okay as long as they cannot be included together. Since we can avoid guard symbol reuse easily, do so: use guard symbol $target_TARGET_SIGNAL_H for linux-user/$target/target_signal.h. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-07-12linux-user: Clean up target_cpu.h header guardsMarkus Armbruster
These headers all use TARGET_CPU_H as header guard symbol. Reuse of the same guard symbol in multiple headers is okay as long as they cannot be included together. Since we can avoid guard symbol reuse easily, do so: use guard symbol $target_TARGET_CPU_H for linux-user/$target/target_cpu.h. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-07-12linux-user: Clean up target_syscall.h header guardsMarkus Armbruster
Some of them use guard symbol TARGET_SYSCALL_H, but we also have CRIS_SYSCALL_H, MICROBLAZE_SYSCALLS_H, TILEGX_SYSCALLS_H and __UC32_SYSCALL_H__. They all upset scripts/clean-header-guards.pl. Reuse of the same guard symbol TARGET_SYSCALL_H in multiple headers is okay as long as they cannot be included together. The script can't tell, so it warns. The script dislikes the other guard symbols, too. They don't match their file name (they should, to make guard collisions less likely), and __UC32_SYSCALL_H__ is a reserved identifier. Clean them all up: use guard symbol $target_TARGET_SYSCALL_H for linux-user/$target/target_sycall.h. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-07-12Use #include "..." for our own headers, <...> for othersMarkus Armbruster
Tracked down with an ugly, brittle and probably buggy Perl script. Also move includes converted to <...> up so they get included before ours where that's obviously okay. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Tested-by: Eric Blake <eblake@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-05-27linux-user: arm: Remove ARM_cpsr and similar #definesPeter Maydell
The #defines of ARM_cpsr and friends in linux-user/arm/target-syscall.h can clash with versions in the system headers if building on an ARM or AArch64 build (though this seems to be dependent on the version of the system headers). The QEMU defines are not very useful (it's not clear that they're intended for use with the target_pt_regs struct rather than (say) the CPUARMState structure) and we only use them in one function in elfload.c anyway. So just remove the #defines and directly access regs->uregs[]. Reported-by: Christopher Covington <cov@codeaurora.org> Tested-by: Christopher Covington <cov@codeaurora.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-05-27linux-user: Support for restarting system calls for ARM targetsTimothy E Baldwin
Update the 32-bit and 64-bit ARM main loop and sigreturn code: * on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn * set all guest CPU state within signal.c code on sigreturn * handle TARGET_QEMU_ESIGRETURN in the main loop as the indication that the main loop should not touch any guest CPU state Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk> Message-id: 1441497448-32489-6-git-send-email-T.E.Baldwin99@members.leeds.ac.uk Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: tweak commit message; drop TARGET_USE_ERESTARTSYS define] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-02-26target-arm: Add write_type argument to cpsr_write()Peter Maydell
Add an argument to cpsr_write() to indicate what kind of CPSR write is being requested, since the exact behaviour should differ for the different cases. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com> Message-id: 1455556977-3644-3-git-send-email-peter.maydell@linaro.org
2016-02-23build: [linux-user] Rename "syscall.h" to "target_syscall.h" in target ↵Lluís Vilanova
directories This fixes double-definitions in linux-user builds when using the UST tracing backend (which indirectly includes the system's "syscall.h"). Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-02-23all: Clean up includesPeter Maydell
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com>
2016-01-29linux-user: Clean up includesPeter Maydell
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1453832250-766-10-git-send-email-peter.maydell@linaro.org
2016-01-11Add missing syscall nrs. according to more recent Linux kernelsJohan Ouwerkerk
This change covers arm, aarch64, mips. Others to follow? The change was prompted by QEMU warning about a syscall 384 (get_random()) with Debian armhf binaries (ARMv7). Signed-off-by: Johan Ouwerkerk <jm.ouwerkerk@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-05-18linux-user/arm: Correct TARGET_NR_timerfd to TARGET_NR_timerfd_createTimothy Baldwin
Misspelled system call name in macro was causing timerfd_create not to be supported for the ARM target. Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-03-16linux-user: Access correct register for get/set_tls syscalls on ARM TZ CPUsMikhail Ilyin
When support was added for TrustZone to ARM CPU emulation, we failed to correctly update the support for the linux-user implementation of the get/set_tls syscalls. This meant that accesses to the TPIDRURO register via the syscalls were always using the non-secure copy of the register even if native MRC/MCR accesses were using the secure register. This inconsistency caused most binaries to segfault on startup if the CPU type was explicitly set to one of the TZ-enabled ones like cortex-a15. (The default "any" CPU doesn't have TZ enabled and so is not affected.) Use access_secure_reg() to determine whether we should be using the secure or the nonsecure copy of TPIDRURO when emulating these syscalls. Signed-off-by: Mikhail Ilyin <m.ilin@samsung.com> Message-id: 1426505198-2411-1-git-send-email-m.ilin@samsung.com [PMM: rewrote commit message to more clearly explain the issue and its consequences.] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-01-27linux-user/arm/nwfpe: Delete unused aCC arrayPeter Maydell
The aCC array in fpopcode.c is completely unused in QEMU; delete it (silencing a clang warning). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-12-11target-arm: make c13 cp regs banked (FCSEIDR, ...)Fabian Aggeler
When EL3 is running in AArch32 (or ARMv7 with Security Extensions) FCSEIDR, CONTEXTIDR, TPIDRURW, TPIDRURO and TPIDRPRW have a secure and a non-secure instance. Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch> Signed-off-by: Greg Bellows <greg.bellows@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1416242878-876-25-git-send-email-greg.bellows@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-10-06linux-user: Enable epoll_pwait syscall for ARMPeter Maydell
We have support for the epoll_pwait syscall, but it wasn't enabled for ARM guests because we hadn't defined the syscall number; correct this deficiency. Reported-by: Dave Flogeras <dflogeras2@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-08-22linux-user: Support target-to-host translation of mlockall argumentTom Musta
The argument to the mlockall system call is not necessarily the same on all platforms and thus may require translation prior to passing to the host. For example, PowerPC 64 bit platforms define values for MCL_CURRENT (0x2000) and MCL_FUTURE (0x4000) which are different from Intel platforms (0x1 and 0x2, respectively) Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-08-22linux-user: Minimum Sig Handler Stack Size for PPC64 ELF V2Tom Musta
The ELF V2 ABI for PPC64 defines MINSIGSTKSZ as 4096 bytes whereas it was 2048 previously. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-06-24Add support for the arm breakpoint syscallHunter Laux
OABI arm used a software interrupt(0xef9f0001) for breakpoints. Since 2005 gdb has used the break instruction(0xe7f001f0) for EABI. Apparently Steel Bank Common Lisp still uses the swi instruction. This is the kernel implementation: http://lxr.free-electrons.com/source/arch/arm/kernel/traps.c#L598 Signed-off-by: Hunter Laux <hunterlaux@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-03-10linux-user: set minimum kernel version to 2.6.32Riku Voipio
Popular glibc based distributions[1] require minimum 2.6.32 as kernel version. For some targets 2.6.18 would be enough, but dropping so low would mean some suboptimal system calls could get used. Set the minimum kernel advertized to 2.6.32 for all architectures but aarch64 to ensure working qemu linux-user in case host kernel is older. [1] https://bugs.launchpad.net/ubuntu/+source/eglibc/+bug/921078 Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-02-18linux-user: sync syscall numbers upto 3.13Riku Voipio
All others updated except unicore, which doesn't look right to begin with. Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-01-07target-arm: Widen thread-local register state fields to 64 bitsPeter Maydell
The common pattern for system registers in a 64-bit capable ARM CPU is that when in AArch32 the cp15 register is a view of the bottom 32 bits of the 64-bit AArch64 system register; writes in AArch32 leave the top half unchanged. The most natural way to model this is to have the state field in the CPU struct be a 64 bit value, and simply have the AArch32 TCG code operate on a pointer to its lower half. For aarch64-linux-user the only registers we need to share like this are the thread-local-storage ones. Widen their fields to 64 bits and provide the 64 bit reginfo struct to make them visible in AArch64 state. Note that minor cleanup of the AArch64 system register encoding space means We can share the TPIDR_EL1 reginfo but need split encodings for TPIDR_EL0 and TPIDRRO_EL0. Since we're touching almost every line in QEMU that uses the c13_tls* fields in this patch anyway, we take the opportunity to rename them in line with the standard ARM architectural names for these registers. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net>
2013-11-29linux-user: create target_structs header to place ipc_perm and shmid_dsPetar Jovanovic
Creating target_structs header in linux-user/$arch/ and making target_ipc_perm and target_shmid_ds its first inhabitants. The struct defintions may/should be further fine-tuned by arch maintainers. Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-07-22linux-user: Clean up handling of clone() argument orderPeter Maydell
Linux manages to have three separate orderings of the arguments to the clone() syscall on different architectures. In the kernel these are selected via CONFIG_CLONE_BACKWARDS and CONFIG_CLONE_BACKWARDS2. Clean up our implementation of this to use similar #define names rather than a TARGET_* ifdef ladder. This includes behaviour changes fixing bugs on cris, x86-64, m68k, openrisc and unicore32. cris had explicit but wrong handling; the others were just incorrectly using QEMU's default, which happened to be the equivalent of CONFIG_CLONE_BACKWARDS. (unicore32 appears to be broken in the mainline kernel in that it tries to use arg3 for both parent_tidptr and newtls simultaneously -- we don't attempt to emulate this bug...) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-07-09linux-user: Move cpu_clone_regs() and cpu_set_tls() into linux-userPeter Maydell
The functions cpu_clone_regs() and cpu_set_tls() are not purely CPU related -- they are specific to the TLS ABI for a a particular OS. Move them into the linux-user/ tree where they belong. target-lm32 had entirely unused implementations, since it has no linux-user target; just drop them. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-12-19fpu: move public header file to include/fpuPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-08linux-user: Merge pread/pwrite into pread64/pwrite64Peter Maydell
The Linux syscalls underlying pread() and pwrite() take a 64 bit offset on all architectures, even if some of them name the syscall "pread/pwrite" rather than "pread64/pwrite64" for historical reasons. So move the four QEMU target architectures (arm, i386, sparc, unicore32) which were defining TARGET_NR_pread/pwrite to define TARGET_NR_pread64/pwrite64 instead, and drop the TARGET_NR_pread/pwrite implementation code completely. (Based on examination of the kernel sources for the four architectures this patch affects.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-06-07build: move *-user/ objects to nested Makefile.objsPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-04-06linux-user/arm/syscall_nr.h: Add syscall number for ppollPeter Maydell
The list of ARM syscall numbers was missing the entry for ppoll, which meant we were accidentally not providing it. (This wasn't causing any practical issues beyond warnings about unimplemented syscalls, because glibc will fall back to another code path if the syscall isn't present.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2011-12-06linux-user/arm/nwfpe/fpopcode.h: Fix non-UTF-8 charactersPeter Maydell
Fix some stray non-UTF-8 characters used in some ASCII art tables by converting them to plain ASCII '|' instead. Reviewed-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-07-11linux-user: Add syscall numbers from kernel 2.6.39.2Peter Maydell
Add syscall numbers for new syscall numbers; this brings us into line with Linux 2.6.39.2. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2011-04-25linux-user/arm/nwfpe: rename REG_PC to ARM_REG_PCPeter Maydell
The REG_PC constant used in the ARM nwfpe code is fine in the kernel but when used in qemu can clash with a definition in the host system include files (in particular on Ubuntu Lucid SPARC, including signal.h will define a REG_PC). Rename the constant to avoid this issue. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-17softfloat: rename float*_eq() into float*_eq_quiet()Aurelien Jarno
float*_eq functions have a different semantics than other comparison functions. Fix that by first renaming float*_quiet() into float*_eq_quiet(). Note that it is purely mechanical, and the behaviour should be unchanged. That said it clearly highlight problems due to this different semantics, they are fixed later in this patch series. Cc: Alexander Graf <agraf@suse.de> Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-02-10linux-user/arm: fix compilation failures using softfloat's struct typesPeter Maydell
Add uses of the float32/float64 boxing and unboxing macros so that the ARM linux-user targets will compile with USE_SOFTFLOAT_STRUCT_TYPES enabled. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-23Delete useless 'extern' qualifiers for functionsBlue Swirl
'extern' qualifier is useless for function declarations. Delete them. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-01-07linux-user: Fix incorrect NaN detection in ARM nwfpe emulationPeter Maydell
The code in the linux-user ARM nwfpe emulation was incorrectly checking only for quiet NaNs when it should have been checking for any kind of NaN. This is probably because the code in question was taken from the Linux kernel, whose copy of the softfloat library had been modified so that float*_is_nan() returned true for all NaNs, not just quiet ones. The qemu equivalent function is float*_is_any_nan(), so use that. NB that this code is really obsolete since nobody uses FPE for actual arithmetic now; this is just cleanup following the recent renaming of the NaN related functions. Acked-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
2011-01-02softfloat: Rename float*_is_nan() functions to float*_is_quiet_nan()Peter Maydell
The softfloat functions float*_is_nan() were badly misnamed, because they return true only for quiet NaNs, not for all NaNs. Rename them to float*_is_quiet_nan() to more accurately reflect what they do. This change was produced by: perl -p -i -e 's/_is_nan/_is_quiet_nan/g' $(git grep -l is_nan) (with the results manually checked.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Nathan Froyd <froydnj@codesourcery.com> Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-03-26linux-user: Add the syscall id for pselect6 on ARMMichael Casadevall
As this is now supported in newer linux kernels. Signed-off-by: Michael Casadevall <mcasadevall@ubuntu.com> Signed-off-by: Riku Voipio <riku.voipio@nokia.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-03-07Update to a hopefully more future proof FSF addressBlue Swirl
See also 8167ee883931cb20c6264fc19d040ce2dc6ceaaa, 530e7615ce3c01882e582c84dc6304ab98a3d5c5 and fad6cb1a565bb73f83fc0e2654489457b489e436. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-10-02linux-user: fix up oversealous nitpickingMichael S. Tsirkin
Looks like linux-user code was correct, just unreadable: what it wanted to do with "-=" was really assign a negative number, not decrement. Fix up accordingly. Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-10-01Revert "Get rid of _t suffix"Anthony Liguori
In the very least, a change like this requires discussion on the list. The naming convention is goofy and it causes a massive merge problem. Something like this _must_ be presented on the list first so people can provide input and cope with it. This reverts commit 99a0949b720a0936da2052cb9a46db04ffc6db29. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-01Get rid of _t suffixmalc
Some not so obvious bits, slirp and Xen were left alone for the time being. Signed-off-by: malc <av1474@comtv.ru>
2009-09-30linux-user: fix old style decrement usageMichael S. Tsirkin
Modern compilers do not parse "=-" as decrement: you must use "-=" for that. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-25static and inline should came before the type of the functionsJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-21Export tables properly to avoid a Sparse warningBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-26 01:39:20 +0000