aboutsummaryrefslogtreecommitdiff
path: root/linux-user/arm
AgeCommit message (Collapse)Author
2020-08-27linux-user: Add generic 'termbits.h' for some archsFilip Bozuta
This patch introduces a generic 'termbits.h' file for following archs: 'aarch64', 'arm', 'i386, 'm68k', 'microblaze', 'nios2', 'openrisc', 'riscv', 's390x', 'x86_64'. Since all of these archs have the same termios flag values and same ioctl_tty numbers, there is no need for a separate 'termbits.h' file for each one of them. For that reason one generic 'termbits.h' file was added for all of them and an '#include' directive was added for this generic file in every arch 'termbits.h' file. Also, some of the flag values that were missing were added in this generic file so that it matches the generic 'termibts.h' and 'ioctls.h' files from the kernel: 'asm-generic/termbits.h' and 'asm-generic/ioctls.h'. Signed-off-by: Filip Bozuta <Filip.Bozuta@syrmia.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20200723210233.349690-2-Filip.Bozuta@syrmia.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-08-27linux-user: Add strace support for printing arguments of syscalls used to ↵Filip Bozuta
lock and unlock memory This patch implements strace argument printing functionality for following syscalls: * mlock, munlock, mlockall, munlockall - lock and unlock memory int mlock(const void *addr, size_t len) int munlock(const void *addr, size_t len) int mlockall(int flags) int munlockall(void) man page: https://man7.org/linux/man-pages/man2/mlock.2.html Implementation notes: Syscall mlockall() takes an argument that is composed of predefined values which represent flags that determine the type of locking operation that is to be performed. For that reason, a printing function "print_mlockall" was stated in file "strace.list". This printing function uses an already existing function "print_flags()" to print the "flags" argument. These flags are stated inside an array "mlockall_flags" that contains values of type "struct flags". These values are instantiated using an existing macro "FLAG_TARGET()" that crates aproppriate target flag values based on those defined in files '/target_syscall.h'. These target flag values were changed from "TARGET_MLOCKALL_MCL*" to "TARGET_MCL_*" so that they can be aproppriately set and recognised in "strace.c" with "FLAG_TARGET()". Value for "MCL_ONFAULT" was added in this patch. This value was also added in "syscall.c" in function "target_to_host_mlockall_arg()". Because this flag value was added in kernel version 4.4, it is enwrapped in an #ifdef directive (both in "syscall.c" and in "strace.c") as to support older kernel versions. The other syscalls have only primitive argument types, so the rest of the implementation was handled by stating an appropriate printing format in file "strace.list". Syscall mlock2() is not implemented in "syscall.c" and thus it's argument printing is not implemented in this patch. Signed-off-by: Filip Bozuta <Filip.Bozuta@syrmia.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20200811164553.27713-4-Filip.Bozuta@syrmia.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-08-21meson: linux-userMarc-André Lureau
The most interesting or most complicated part here is the syscall_nr.h generators. In order to keep the generation logic all in meson.build, I am adding to config_target the name of the .tbl file, and making the generated file syscall<SUFFIX>_nr.h for input file syscall<SUFFIX>.tbl. For architectures where the input file is not named syscall_nr.tbl, syscall_nr.h has to be a source file; it's just a forwarder for x86 (i386/x86_64), while for MIPS64 it chooses between N32 and N64 ABIs. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-05-21linux-user/arm/signal.c: Drop TARGET_CONFIG_CPU_32Peter Maydell
The Arm signal-handling code has some parts ifdeffed with a TARGET_CONFIG_CPU_32, which is always defined. This is a leftover from when this code's structure was based on the Linux kernel signal handling code, where it was intended to support 26-bit Arm CPUs. The kernel dropped its CONFIG_CPU_32 in kernel commit 4da8b8208eded0ba21e3 in 2009. QEMU has never had 26-bit CPU support and is unlikely to ever add it; we certainly aren't going to support 26-bit Linux binaries via linux-user mode. The ifdef is just unhelpful noise, so remove it entirely. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200518143014.20689-1-peter.maydell@linaro.org
2020-05-21linux-user/arm: Reset CPSR_E when entering a signal handlerAmanieu d'Antras
This fixes signal handlers running with the wrong endianness if the interrupted code used SETEND to dynamically switch endianness. Signed-off-by: Amanieu d'Antras <amanieu@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200511131117.2486486-1-amanieu@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-21target/arm: Allow user-mode code to write CPSR.E via MSRPeter Maydell
Using the MSR instruction to write to CPSR.E is deprecated, but it is required to work from any mode including unprivileged code. We were incorrectly forbidding usermode code from writing it because CPSR_USER did not include the CPSR_E bit. We use CPSR_USER in only three places: * as the mask of what to allow userspace MSR to write to CPSR * when deciding what bits a linux-user signal-return should be able to write from the sigcontext structure * in target_user_copy_regs() when we set up the initial registers for the linux-user process In the first two cases not being able to update CPSR.E is a bug, and in the third case it doesn't matter because CPSR.E is always 0 there. So we can fix both bugs by adding CPSR_E to CPSR_USER. Because the cpsr_write() in restore_sigcontext() is now changing a CPSR bit which is cached in hflags, we need to add an arm_rebuild_hflags() call there; the callsite in target_user_copy_regs() was already rebuilding hflags for other reasons. (The recommended way to change CPSR.E is to use the 'SETEND' instruction, which we do correctly allow from usermode code.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200518142801.20503-1-peter.maydell@linaro.org
2020-05-21linux-user/arm: Fix identification of syscall numbersPeter Maydell
Our code to identify syscall numbers has some issues: * for Thumb mode, we never need the immediate value from the insn, but we always read it anyway * bad immediate values in the svc insn should cause a SIGILL, but we were abort()ing instead (via "goto error") We can fix both these things by refactoring the code that identifies the syscall number to more closely follow the kernel COMPAT_OABI code: * for Thumb it is always r7 * for Arm, if the immediate value is 0, then this is an EABI call with the syscall number in r7 * otherwise, we XOR the immediate value with 0x900000 (ARM_SYSCALL_BASE for QEMU; __NR_OABI_SYSCALL_BASE in the kernel), which converts valid syscall immediates into the desired value, and puts all invalid immediates in the range 0x100000 or above * then we can just let the existing "value too large, deliver SIGILL" case handle invalid numbers, and drop the 'goto error' Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 20200420212206.12776-5-peter.maydell@linaro.org
2020-05-21linux-user/arm: Handle invalid arm-specific syscalls correctlyPeter Maydell
The kernel has different handling for syscalls with invalid numbers that are in the "arm-specific" range 0x9f0000 and up: * 0x9f0000..0x9f07ff return -ENOSYS if not implemented * other out of range syscalls cause a SIGILL (see the kernel's arch/arm/kernel/traps.c:arm_syscall()) Implement this distinction. (Note that our code doesn't look quite like the kernel's, because we have removed the 0x900000 prefix by this point, whereas the kernel retains it in arm_syscall().) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200420212206.12776-4-peter.maydell@linaro.org
2020-05-21linux-user/arm: Remove bogus SVC 0xf0002 handlingPeter Maydell
We incorrectly treat SVC 0xf0002 as a cacheflush request (which is a NOP for QEMU). This is the wrong syscall number, because in the svc-immediate OABI syscall numbers are all offset by the ARM_SYSCALL_BASE value and so the correct insn is SVC 0x9f0002. (This is handled further down in the code with the other Arm-specific syscalls like NR_breakpoint.) When this code was initially added in commit 6f1f31c069b20611 in 2004, ARM_NR_cacheflush was defined as (ARM_SYSCALL_BASE + 0xf0000 + 2) so the value in the comparison took account of the extra 0x900000 offset. In commit fbb4a2e371f2fa7 in 2008, the ARM_SYSCALL_BASE was removed from the definition of ARM_NR_cacheflush and handling for this group of syscalls was added below the point where we subtract ARM_SYSCALL_BASE from the SVC immediate value. However that commit forgot to remove the now-obsolete earlier handling code. Remove the spurious ARM_NR_cacheflush condition. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 20200420212206.12776-3-peter.maydell@linaro.org
2020-05-21linux-user/arm: BKPT should cause SIGTRAP, not be a syscallPeter Maydell
In linux-user/arm/cpu-loop.c we incorrectly treat EXCP_BKPT similarly to EXCP_SWI, which means that if the guest executes a BKPT insn then QEMU will perform a syscall for it (which syscall depends on what value happens to be in r7...). The correct behaviour is that the guest process should take a SIGTRAP. This code has been like this (more or less) since commit 06c949e62a098f in 2006 which added BKPT in the first place. This is probably because at the time the same code path was used to handle both Linux syscalls and semihosting calls, and (on M profile) BKPT with a suitable magic number is used for semihosting calls. But these days we've moved handling of semihosting out to an entirely different codepath, so we can fix this bug by simply removing this handling of EXCP_BKPT and instead making it deliver a SIGTRAP like EXCP_DEBUG (as we do already on aarch64). Reported-by: <omerg681@gmail.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200420212206.12776-2-peter.maydell@linaro.org Fixes: https://bugs.launchpad.net/qemu/+bug/1873898 Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-20linux-user: update syscall.tbl from linux 0bf999f9c5e7Laurent Vivier
Run scripts/update-syscalltbl.sh with linux commit 0bf999f9c5e7 Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Taylor Simpson <tsimpson@quicinc.com> Message-Id: <20200310103403.3284090-20-laurent@vivier.eu> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-03-20linux-user, arm: add syscall table generation supportLaurent Vivier
Copy syscall.tbl and syscallhdr.sh from linux/arch/arm/tools/syscalls v5.5 Update syscallhdr.sh to generate QEMU syscall_nr.h Update syscall.c to manage TARGET_NR_arm_sync_file_range as it has replaced TARGET_NR_sync_file_range2 Move existing stuff from linux-user/Makefile.objs to linux-user/arm/Makefile.objs Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Taylor Simpson <tsimpson@quicinc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200310103403.3284090-9-laurent@vivier.eu> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-02-28target/arm: Add isar_feature_aa32_vfp_simdRichard Henderson
Use this in the places that were checking ARM_FEATURE_VFP, and are obviously testing for the existance of the register set as opposed to testing for some particular instruction extension. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200224222232.13807-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-02-19linux-user: Use `qemu_log' for non-strace loggingJosh Kunz
Since most calls to `gemu_log` are actually logging unimplemented features, this change replaces most non-strace calls to `gemu_log` with calls to `qemu_log_mask(LOG_UNIMP, ...)`. This allows the user to easily log to a file, and to mask out these log messages if they desire. Note: This change is slightly backwards incompatible, since now these "unimplemented" log messages will not be logged by default. Signed-off-by: Josh Kunz <jkz@google.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20200204025416.111409-2-jkz@google.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-02-17linux-user: arm: Update syscall numbers to kernel 5.5 levelAleksandar Markovic
Update arm syscall numbers based on Linux kernel v5.5. CC: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <1581596954-2305-3-git-send-email-aleksandar.markovic@rt-rk.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-01-09semihosting: add qemu_semihosting_console_inc for SYS_READCKeith Packard
Provides a blocking call to read a character from the console using semihosting.chardev, if specified. This takes some careful command line options to use stdio successfully as the serial ports, monitor and semihost all want to use stdio. Here's a sample set of command line options which share stdio between semihost, monitor and serial ports: qemu \ -chardev stdio,mux=on,id=stdio0 \ -serial chardev:stdio0 \ -semihosting-config enable=on,chardev=stdio0 \ -mon chardev=stdio0,mode=readline This creates a chardev hooked to stdio and then connects all of the subsystems to it. A shorter mechanism would be good to hear about. Signed-off-by: Keith Packard <keithp@keithp.com> Message-Id: <20191104204230.12249-1-keithp@keithp.com> [AJB: fixed up deadlock, minor commit title reword] Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Keith Packard <keithp@keithp.com> Tested-by: Keith Packard <keithp@keithp.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2020-01-09target/arm: only update pc after semihosting completesAlex Bennée
Before we introduce blocking semihosting calls we need to ensure we can restart the system on semi hosting exception. To be able to do this the EXCP_SEMIHOST operation should be idempotent until it finally completes. Practically this means ensureing we only update the pc after the semihosting call has completed. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Keith Packard <keithp@keithp.com> Tested-by: Keith Packard <keithp@keithp.com>
2019-11-06linux-user: Introduce cpu_clone_regs_parentRichard Henderson
We will need a target-specific hook for adjusting registers in the parent during clone. Add an empty inline function for each target, and invoke it from the proper places. Reviewed-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20191106113318.10226-11-richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-11-06linux-user: Rename cpu_clone_regs to cpu_clone_regs_childRichard Henderson
We will need a target-specific hook for adjusting registers in the parent during clone. To avoid confusion, rename the one we have to make it clear it affects the child. At the same time, pass in the flags from the clone syscall. We will need them for correct behaviour for Sparc. Reviewed-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20191106113318.10226-10-richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-10-24linux-user/arm: Rebuild hflags for TARGET_WORDS_BIGENDIANRichard Henderson
Continue setting, but not relying upon, env->hflags. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191023150057.25731-24-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-27target/arm: remove run-time semihosting checks for linux-userAlex Bennée
Now we do all our checking at translate time we can make cpu_loop a little bit simpler. We also introduce a simple linux-user semihosting test case to defend the functionality. The out-of-tree softmmu based semihosting tests are still more comprehensive. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20190913151845.12582-6-alex.bennee@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-11linux-user/arm: Adjust MAX_RESERVED_VA for M-profileRichard Henderson
Limit the virtual address space for M-profile cpus to 2GB, so that we avoid all of the magic addresses in the top half of the M-profile system map. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20190822185929.16891-3-richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-09-11linux-user: Pass CPUState to MAX_RESERVED_VARichard Henderson
Turn the scalar macro into a functional macro. Move the creation of the cpu up a bit within main() so that we can pass it to the invocation of MAX_RESERVED_VA. Delay the validation of the -R parameter until MAX_RESERVED_VA is computed. So far no changes to any of the MAX_RESERVED_VA macros to actually use the cpu in any way, but ARM will need it. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20190822185929.16891-2-richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-06-12semihosting: split console_out into string and char versionsAlex Bennée
This is ostensibly to avoid the weirdness of len looking like it might come from a guest and sometimes being used. While we are at it fix up the error checking for the arm-linux-user implementation of the API which got flagged up by Coverity (CID 1401700). Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-06-12Supply missing header guardsMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190604181618.19980-5-armbru@redhat.com>
2019-06-12Include qemu-common.h exactly where neededMarkus Armbruster
No header includes qemu-common.h after this commit, as prescribed by qemu-common.h's file comment. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-5-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and net/tap-bsd.c fixed up]
2019-06-10target/arm: Use env_cpu, env_archcpuRichard Henderson
Cleanup in the boilerplate that each target must define. Replace arm_env_get_cpu with env_archcpu. The combination CPU(arm_env_get_cpu) should have used ENV_GET_CPU to begin; use env_cpu now. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10cpu: Replace ENV_GET_CPU with env_cpuRichard Henderson
Now that we have both ArchCPU and CPUArchState, we can define this generically instead of via macro in each target's cpu.h. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-28target/arm: use the common interface for WRITE0/WRITEC in arm-semiAlex Bennée
Now we have a common semihosting console interface use that for our string output. However ARM is currently unique in also supporting semihosting for linux-user so we need to replicate the API in linux-user. If other architectures gain this support we can move the file later. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2018-11-12linux-user: Don't call gdb_handlesig() before queue_signal()Peter Maydell
The CPU main-loop routines for linux-user generally call gdb_handlesig() when they're about to queue a SIGTRAP signal. This is wrong, because queue_signal() will cause us to pend a signal, and process_pending_signals() will then call gdb_handlesig() itself. So the effect is that we notify gdb of the SIGTRAP, and then if gdb says "OK, continue with signal X" we will incorrectly notify gdb of the signal X as well. We don't do this double-notify for anything else, only SIGTRAP. Remove this unnecessary and incorrect code from all the targets except for nios2 (whose main loop is doing something different and broken, and will be handled in a separate patch). This bug only manifests if the user responds to the reported SIGTRAP using "signal SIGFOO" rather than "continue"; since the latter is the overwhelmingly common thing to do after a breakpoint most people won't have hit this. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20181019174958.26616-2-peter.maydell@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2018-06-04linux-user: move generic signal definitions to generic/signal.hLaurent Vivier
No code change. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20180529194207.31503-10-laurent@vivier.eu>
2018-06-04linux-user: move get_sp_from_cpustate() to target_cpu.hLaurent Vivier
Remove useless includes Fix HPPA include guard. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Acked-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20180529194207.31503-9-laurent@vivier.eu>
2018-06-04linux-user: move arm/aarch64/m68k fcntl definitions to ↵Laurent Vivier
[arm|aarch64|m68k]/target_fcntl.h No code change. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Acked-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20180529194207.31503-5-laurent@vivier.eu>
2018-06-04linux-user: move generic fcntl definitions to generic/fcntl.hLaurent Vivier
add a per target target_fcntl.h and include the generic one from them No code change. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20180529194207.31503-2-laurent@vivier.eu>
2018-05-25linux-user: move socket.h generic definitions to generic/sockbits.hLaurent Vivier
and include the file from architectures without specific definitions Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20180519092956.15134-5-laurent@vivier.eu>
2018-05-03linux-user: remove useless padding in flock64 structureLaurent Vivier
Since commit 8efb2ed5ec ("linux-user: Correct signedness of target_flock l_start and l_len fields"), flock64 structure uses abi_llong for l_start and l_len in place of "unsigned long long" this should force them to be aligned accordingly to the target rules. So we can remove the padding field and the QEMU_PACKED attribute. I have compared the result of the following program before and after the change: cat -> flock64_dump <<EOF p/d sizeof(struct target_flock64) p/d &((struct target_flock64 *)0)->l_type p/d &((struct target_flock64 *)0)->l_whence p/d &((struct target_flock64 *)0)->l_start p/d &((struct target_flock64 *)0)->l_len p/d &((struct target_flock64 *)0)->l_pid quit EOF for file in build/all/*-linux-user/qemu-* ; do echo $file gdb -batch -nx -x flock64_dump $file 2> /dev/null done The sizeof() changes because we remove the QEMU_PACKED. The new size is 32 (except for i386 and m68k) and this is the real size of "struct flock64" on the target architecture. The following architectures differ: aarch64_be, aarch64, alpha, armeb, arm, cris, hppa, nios2, or1k, riscv32, riscv64, s390x. For a subset of these architectures, I have checked with the following program the new structure is the correct one: #include <stdio.h> #define __USE_LARGEFILE64 #include <fcntl.h> int main(void) { printf("struct flock64 %d\n", sizeof(struct flock64)); printf("l_type %d\n", &((struct flock64 *)0)->l_type); printf("l_whence %d\n", &((struct flock64 *)0)->l_whence); printf("l_start %d\n", &((struct flock64 *)0)->l_start); printf("l_len %d\n", &((struct flock64 *)0)->l_len); printf("l_pid %d\n", &((struct flock64 *)0)->l_pid); } [I have checked aarch64, alpha, hppa, s390x] For ARM, the target_flock64 becomes the EABI definition, so we need to define the OABI one in place of the EABI one and use it when it is needed. I have also fixed the alignment value for sh4 (to align llong on 4 bytes) (see c2e3dee6e0 "linux-user: Define target alignment size") [We should check alignment properties for cris, nios2 and or1k] Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20180502215730.28162-1-laurent@vivier.eu>
2018-05-03linux-user: introduce target_sigsp() and target_save_altstack()Laurent Vivier
Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20180411192347.30228-1-laurent@vivier.eu>
2018-05-03linux-user: ARM-FDPIC: Add support for signals for FDPIC targetsChristophe Lyon
The FDPIC restorer needs to deal with a function descriptor, hence we have to extend 'retcode' such that it can hold the instructions needed to perform this. The restorer sequence uses the same thumbness as the exception handler (mainly to support Thumb-only architectures). Co-Authored-By: Mickaël Guêné <mickael.guene@st.com> Signed-off-by: Christophe Lyon <christophe.lyon@st.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20180430080404.7323-5-christophe.lyon@st.com> [lv: moved the change to linux-user/arm/signal.c] Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2018-04-30linux-user: Add ARM get_tls syscall supportChristophe Lyon
Co-Authored-By: Mickaël Guêné <mickael.guene@st.com> Signed-off-by: Christophe Lyon <christophe.lyon@st.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20180416091845.7315-1-christophe.lyon@st.com> [lv: moved the change to linux-user/arm/cpu_loop.c] Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2018-04-30linux-user: move arm cpu loop to arm directoryLaurent Vivier
No code change, only move code from main.c to arm/cpu_loop.c and duplicate some macro defined for both arm and aarch64. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20180411185651.21351-5-laurent@vivier.eu>
2018-04-30linux-user: create a dummy per arch cpu_loop.cLaurent Vivier
Create a cpu_loop-common.h for future use by these new files and use it in the existing main.c Introduce target_cpu_copy_regs(): declare the function in cpu_loop-common.h and an empty function for each target, to move all the cpu_loop prologues to this function. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20180411185651.21351-2-laurent@vivier.eu>
2018-04-30linux-user: define TARGET_ARCH_HAS_SETUP_FRAMELaurent Vivier
Instead of calling setup_frame() conditionally to a list of known targets, define TARGET_ARCH_HAS_SETUP_FRAME if the target provides the function and call it only if the macro is defined. Move declarations of setup_frame() and setup_rt_frame() to linux-user/signal-common.h Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20180424192635.6027-21-laurent@vivier.eu>
2018-04-30linux-user: move arm signal.c parts to arm directoryLaurent Vivier
No code change, only move code from signal.c to arm/signal.c, except adding includes and exporting setup_frame() and setup_rt_frame(). Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20180424192635.6027-4-laurent@vivier.eu>
2018-04-30linux-user: create a dummy per arch signal.cLaurent Vivier
Create a signal-common.h for future use by these new files and use it in the existing signal.c Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20180424192635.6027-2-laurent@vivier.eu>
2018-02-25linux-user: Move CPU type name selection to a functionLaurent Vivier
Instead of a sequence of "#if ... #endif" move the selection to a function in linux-user/*/target_elf.h We can't add them in linux-user/*/target_cpu.h because we will need to include "elf.h" to use ELF flags with eflags, and including "elf.h" in "target_cpu.h" introduces some conflicts in elfload.c Suggested-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180220173307.25125-2-laurent@vivier.eu>
2018-02-18linux-user: Implement ioctl cmd TIOCGPTPEERAndreas Schwab
With glibc 2.27 the openpty function prefers the TIOCGPTPEER ioctl. Signed-off-by: Andreas Schwab <schwab@suse.de> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <mvmbmhdosb9.fsf_-_@suse.de> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2018-01-11linux-user/arm/nwfpe: Check coprocessor number for FPA emulationPeter Maydell
Our copy of the nwfpe code for emulating of the old FPA11 floating point unit doesn't check the coprocessor number in the instruction when it emulates it. This means that we might treat some instructions which should really UNDEF as being FPA11 instructions by accident. The kernel's copy of the nwfpe code doesn't make this error; I suspect the bug was noticed and fixed as part of the process of mainlining the nwfpe code more than a decade ago. Add a check that the coprocessor number (which is always in bits [11:8] of the instruction) is either 1 or 2, which is where the FPA11 lives. Reported-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-10-16linux-user: Tidy and enforce reserved_va initializationRichard Henderson
We had a check using TARGET_VIRT_ADDR_SPACE_BITS to make sure that the allocation coming in from the command-line option was not too large, but that didn't include target-specific knowledge about other restrictions on user-space. Remove several target-specific hacks in linux-user/main.c. For MIPS and Nios, we can replace them with proper adjustments to the respective target's TARGET_VIRT_ADDR_SPACE_BITS definition. For ARM, we had no existing ifdef but I suspect that the current default value of 0xf7000000 was chosen with this in mind. Define a workable value in linux-user/arm/, and also document why the special case is required. Signed-off-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20170708025030.15845-3-rth@twiddle.net> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-09-22linux-user: fix TARGET_NR_selectLaurent Vivier
TARGET_NR_select can have three different implementations: 1- to always return -ENOSYS microblaze, ppc, ppc64 -> TARGET_WANT_NI_OLD_SELECT 2- to take parameters from a structure pointed by arg1 (kernel sys_old_select) i386, arm, m68k -> TARGET_WANT_OLD_SYS_SELECT 3- to take parameters from arg[1-5] (kernel sys_select) x86_64, alpha, s390x, cris, sparc, sparc64 Some (new) architectures don't define NR_select, 4- but only NR__newselect with sys_select: mips, mips64, sh 5- don't define NR__newselect, and use pselect6 syscall: aarch64, openrisc, tilegx, unicore32 Reported-by: Timothy Pearson <tpearson@raptorengineering.com> Reported-by: Allan Wirth <awirth@akamai.com> Suggested-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-09-21linux-user: Use correct target SHMLBA in shmat()Peter Maydell
The shmat() handling needs to do target-specific handling of the attach address for shmat(): * if the SHM_RND flag is passed, the address is rounded down to a SHMLBA boundary * if SHM_RND is not passed, then the call is failed EINVAL if the address is not a multiple of SHMLBA Since SHMLBA is target-specific, we need to do this checking and rounding in QEMU and can't leave it up to the host syscall. Allow targets to define TARGET_FORCE_SHMLBA and provide a target_shmlba() function if appropriate, and update do_shmat() to honour them. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-22 23:48:37 +0000