aboutsummaryrefslogtreecommitdiff
path: root/linux-user/aarch64
AgeCommit message (Collapse)Author
2023-09-01linux-user: Emulate /proc/cpuinfo on aarch64 and armHelge Deller
Add emulation for /proc/cpuinfo for arm architecture. The output below mimics output as seen on debian porterboxes. aarch64 output example: processor : 0 model name : ARMv8 Processor rev 0 (v8l) BogoMIPS : 100.00 Features : swp half thumb fast_mult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae aes pmull sha1 sha2 crc32 CPU implementer : 0x41 CPU architecture: 8 CPU variant : 0x1 CPU part : 0xd07 CPU revision : 0 arm 32-bit output example: processor : 0 model name : ARMv7 Processor rev 5 (armv7l) BogoMIPS : 100.00 Features : swp half thumb fast_mult vfp edsp thumbee neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0f CPU part : 0xc07 CPU revision : 5 Signed-off-by: Helge Deller <deller@gmx.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230803214450.647040-3-deller@gmx.de> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-09-01linux-user: Split out cpu/target_proc.hRichard Henderson
Move the various open_cpuinfo functions into new files. Move the m68k open_hardware function as well. All other guest architectures get a boilerplate empty file. Tested-by: Helge Deller <deller@gmx.de> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-08-08linux-user: Define ELF_ET_DYN_BASE in $guest/target_mman.hRichard Henderson
Copy each guest kernel's default value, then bound it against reserved_va or the host address space. Tested-by: Helge Deller <deller@gmx.de> Reviewed-by: Helge Deller <deller@gmx.de> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-08-08linux-user: Define TASK_UNMAPPED_BASE in $guest/target_mman.hRichard Henderson
Provide default values that are as close as possible to the values used by the guest's kernel. Tested-by: Helge Deller <deller@gmx.de> Reviewed-by: Helge Deller <deller@gmx.de> Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-07-15linux-user: Split TARGET_PROT_* out of syscall_defs.hRichard Henderson
Move the values into the per-target target_mman.h headers Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230707204054.8792-8-richard.henderson@linaro.org>
2023-02-03linux-user: move target_flat.h to target subdirsMike Frysinger
This makes target_flat.h behave like every other target_xxx.h header. It also makes it actually work -- while the current header says adding a header to the target subdir overrides the common one, it doesn't. This is for two reasons: * meson.build adds -Ilinux-user before -Ilinux-user/$arch * the compiler search path for "target_flat.h" looks in the same dir as the source file before searching -I paths. This can be seen with the xtensa port -- the subdir settings aren't used which breaks stack setup. Move it to the generic/ subdir and add include stubs like every other target_xxx.h header is handled. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230129004625.11228-1-vapier@gentoo.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2023-01-23target/arm/sme: Rebuild hflags in aarch64_set_svcr()Richard Henderson
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Fabiano Rosas <farosas@suse.de> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230112102436.1913-7-philmd@linaro.org Message-Id: <20230112004322.161330-1-richard.henderson@linaro.org> [PMD: Split patch in multiple tiny steps] Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-23target/arm/sme: Reset SVE state in aarch64_set_svcr()Richard Henderson
Move arm_reset_sve_state() calls to aarch64_set_svcr(). Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Fabiano Rosas <farosas@suse.de> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230112102436.1913-5-philmd@linaro.org Message-Id: <20230112004322.161330-1-richard.henderson@linaro.org> [PMD: Split patch in multiple tiny steps] Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-23target/arm/sme: Introduce aarch64_set_svcr()Richard Henderson
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Fabiano Rosas <farosas@suse.de> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230112102436.1913-4-philmd@linaro.org Message-Id: <20230112004322.161330-1-richard.henderson@linaro.org> [PMD: Split patch in multiple tiny steps] Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-09-27linux-user: Provide MADV_* definitionsIlya Leoshkevich
Provide MADV_* definitions using target_mman.h header, similar to what kernel does. Most architectures use the same values, with the exception of alpha and hppa. Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220906000839.1672934-2-iii@linux.ibm.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-07-11linux-user/aarch64: Implement PR_SME_GET_VL, PR_SME_SET_VLRichard Henderson
These prctl set the Streaming SVE vector length, which may be completely different from the Normal SVE vector length. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-43-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-07-11linux-user: Rename sve prctlsRichard Henderson
Add "sve" to the sve prctl functions, to distinguish them from the coming "sme" prctls with similar names. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-42-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-07-11linux-user/aarch64: Implement SME signal handlingRichard Henderson
Set the SM bit in the SVE record on signal delivery, create the ZA record. Restore SM and ZA state according to the records present on return. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-41-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-07-11linux-user/aarch64: Move sve record checks into restoreRichard Henderson
Move the checks out of the parsing loop and into the restore function. This more closely mirrors the code structure in the kernel, and is slightly clearer. Reject rather than silently skip incorrect VL and SVE record sizes, bringing our checks in to line with those the kernel does. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-40-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-07-11linux-user/aarch64: Verify extra record lock succeededRichard Henderson
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-39-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-07-11linux-user/aarch64: Do not allow duplicate or short sve recordsRichard Henderson
In parse_user_sigframe, the kernel rejects duplicate sve records, or records that are smaller than the header. We were silently allowing these cases to pass, dropping the record. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-38-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-07-11linux-user/aarch64: Tidy target_restore_sigframe error returnRichard Henderson
Fold the return value setting into the goto, so each point of failure need not do both. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-37-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-07-11linux-user/aarch64: Add SM bit to SVE signal contextRichard Henderson
Make sure to zero the currently reserved fields. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-36-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-07-11linux-user/aarch64: Reset PSTATE.SM on syscallsRichard Henderson
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-35-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-07-11linux-user/aarch64: Clear tpidr2_el0 if CLONE_SETTLSRichard Henderson
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220708151540.18136-34-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-06-28semihosting: Return void from do_common_semihostingRichard Henderson
Perform the cleanup in the FIXME comment in common_semi_gdb_syscall. Do not modify guest registers until the syscall is complete, which in the gdbstub case is asynchronous. In the synchronous non-gdbstub case, use common_semi_set_ret to set the result. Merge set_swi_errno into common_semi_cb. Rely on the latter for combined return value / errno setting. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-06-08linux-user/aarch64: Introduce sve_vqRichard Henderson
Add an interface function to extract the digested vector length rather than the raw zcr_el[1] value. This fixes an incorrect return from do_prctl_set_vl where we didn't take into account the set of vector lengths supported by the cpu. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220607203306.657998-3-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-04-06Remove qemu-common.h include from most unitsMarc-André Lureau
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20220323155743.1585078-33-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-06Replace TARGET_WORDS_BIGENDIANMarc-André Lureau
Convert the TARGET_WORDS_BIGENDIAN macro, similarly to what was done with HOST_BIG_ENDIAN. The new TARGET_BIG_ENDIAN macro is either 0 or 1, and thus should always be defined to prevent misuse. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Suggested-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220323155743.1585078-8-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-02-01linux-user: Move generic TARGET_RLIMIT* definitions to generic/target_resource.hSerge Belyshev
Signed-off-by: Serge Belyshev <belyshev@depni.sinp.msu.ru> Message-Id: <87ee4ql3yk.fsf_-_@depni.sinp.msu.ru> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-01-11linux-user: Move target_struct.h generic definitions to generic/Richard Henderson
Most targets share the same generic ipc structure definitions. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20220107042600.149852-3-richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-01-06linux-user: Split out do_prctl and subroutinesRichard Henderson
Since the prctl constants are supposed to be generic, supply any that are not provided by the host. Split out subroutines for PR_GET_FP_MODE, PR_SET_FP_MODE, PR_GET_VL, PR_SET_VL, PR_RESET_KEYS, PR_SET_TAGGED_ADDR_CTRL, PR_GET_TAGGED_ADDR_CTRL. Return EINVAL for guests that do not support these options rather than pass them on to the host. Reviewed-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20211227150127.2659293-2-richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-01-06linux-user: target_syscall.h remove definition TARGET_MINSIGSTKSZSong Gao
TARGET_MINSIGSTKSZ has been defined in generic/signal.h or target_signal.h, We don't need to define it again. Signed-off-by: Song Gao <gaosong@loongson.cn> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <1637893388-10282-3-git-send-email-gaosong@loongson.cn> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-01-06linux-user: Move target_signal.h generic definitions to generic/signal.hSong Gao
No code change Suggested-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Song Gao <gaosong@loongson.cn> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <1637893388-10282-2-git-send-email-gaosong@loongson.cn> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-12-19linux-user: Rename TARGET_QEMU_ESIGRETURN to QEMU_ESIGRETURNRichard Henderson
This value is fully internal to qemu, and so is not a TARGET define. Reviewed-by: Warner Losh <imp@bsdimp.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-12-19linux-user: Rename TARGET_ERESTARTSYS to QEMU_ERESTARTSYSRichard Henderson
This value is fully internal to qemu, and so is not a TARGET define. We use this as an extra marker for both host and target errno. Reviewed-by: Warner Losh <imp@bsdimp.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-12-15target/arm: Take an exception if PC is misalignedRichard Henderson
For A64, any input to an indirect branch can cause this. For A32, many indirect branch paths force the branch to be aligned, but BXWritePC does not. This includes the BX instruction but also other interworking changes to PC. Prior to v8, this case is UNDEFINED. With v8, this is CONSTRAINED UNPREDICTABLE and may either raise an exception or force align the PC. We choose to raise an exception because we have the infrastructure, it makes the generated code for gen_bx simpler, and it has the possibility of catching more guest bugs. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-11-02target/arm: Implement arm_cpu_record_sigbusRichard Henderson
Because of the complexity of setting ESR, re-use the existing arm_cpu_do_unaligned_access function. This means we have to handle the exception ourselves in cpu_loop, transforming it to the appropriate signal. Reviewed-by: Warner Losh <imp@bsdimp.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-10-01linux-user/aarch64: Implement setup_sigtrampRichard Henderson
Create and record the rt signal trampoline. Use it when the guest does not use SA_RESTORER. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210929130553.121567-3-richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-23linux-user/aarch64: Use force_sig_fault()Peter Maydell
Use the new force_sig_fault() function instead of setting up a target_siginfo_t and calling queue_signal(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210813131809.28655-8-peter.maydell@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-23linux-user/aarch64: Set siginfo_t addr field for SIGTRAP signalsPeter Maydell
When generating a TRAP_BRKPT SIGTRAP, set the siginfo_t addr field to the PC where the breakpoint/singlestep trap occurred; this is what the kernel does for this signal for this architecture. Fixes: Coverity 1459154 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210813131809.28655-2-peter.maydell@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-13linux-user: Split linux-user internals out of qemu.hPeter Maydell
qemu.h is included in various non-linux-user files (which mostly want the TaskState struct and the functions for doing usermode access to guest addresses like lock_user(), unlock_user(), get_user*(), etc). Split out the parts that are only used in linux-user itself into a new user-internals.h. This leaves qemu.h with basically three things: * the definition of the TaskState struct * the user-access functions and macros * do_brk() all of which are needed by code outside linux-user that includes qemu.h. The addition of all the extra #include lines was done with sed -i '/include.*qemu\.h/a #include "user-internals.h"' $(git grep -l 'include.*qemu\.h' linux-user) (and then undoing the change to fpa11.h). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210908154405.15417-8-peter.maydell@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-13linux-user: Split signal-related prototypes into signal-common.hPeter Maydell
Split the signal related prototypes into the existing header file signal-common.h, and include it in those places that now require it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210908154405.15417-4-peter.maydell@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-07-13linux-user: update syscall_nr.h to Linux v5.13Laurent Vivier
Automatically generated using scripts/gensyscalls.sh Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Taylor Simpson <tsimpson@quicinc.com> Message-Id: <20210708215756.268805-2-laurent@vivier.eu> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-07-12linux-user: Extract target errno to 'target_errno_defs.h'Philippe Mathieu-Daudé
We want to access the target errno indepently of the rest of the linux-user code. Move the header containing the generic errno definitions ('errno_defs.h') to 'generic/target_errno_defs.h', create a new 'target_errno_defs.h' in each target which itself includes 'generic/target_errno_defs.h'. Suggested-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210708170550.1846343-4-f4bug@amsat.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-15linux-user: Pass CPUArchState to target_restore_altstackRichard Henderson
In most cases we were already passing get_sp_from_cpustate directly to the function. In other cases, we were passing a local variable which already contained the same value. In the rest of the cases, we were passing the stack pointer out of env directly. Reviewed by: Warner Losh <imp@bsdimp.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210426025334.1168495-5-richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-15linux-user: Use target_restore_altstack in all sigreturnRichard Henderson
Note that target_restore_altstack uses the host memory pointer that we have already verified, so TARGET_EFAULT is not a possible return value. Note that using -EFAULT was a bug. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210426025334.1168495-3-richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-03-10semihosting: Move include/hw/semihosting/ -> include/semihosting/Philippe Mathieu-Daudé
We want to move the semihosting code out of hw/ in the next patch. This patch contains the mechanical steps, created using: $ git mv include/hw/semihosting/ include/ $ sed -i s,hw/semihosting,semihosting, $(git grep -l hw/semihosting) Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20210226131356.3964782-2-f4bug@amsat.org> Message-Id: <20210305135451.15427-2-alex.bennee@linaro.org>
2021-02-16linux-user/aarch64: Signal SEGV_MTEAERR for async tag check errorRichard Henderson
The real kernel collects _TIF_MTE_ASYNC_FAULT into the current thread's state on any kernel entry (interrupt, exception etc), and then delivers the signal in advance of resuming the thread. This means that while the signal won't be delivered immediately, it will not be delayed forever -- at minimum it will be delivered after the next clock interrupt. We don't have a clock interrupt in linux-user, so we issue a cpu_kick to signal a return to the main loop at the end of the current TB. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-29-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-02-16linux-user/aarch64: Signal SEGV_MTESERR for sync tag check faultRichard Henderson
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-28-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-02-16linux-user/aarch64: Pass syndrome to EXC_*_ABORTRichard Henderson
A proper syndrome is required to fill in the proper si_code. Use page_get_flags to determine permission vs translation for user-only. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-27-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-02-16linux-user/aarch64: Implement PR_MTE_TCF and PR_MTE_TAGRichard Henderson
These prctl fields are required for the function of MTE. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-24-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-02-16linux-user/aarch64: Implement PR_TAGGED_ADDR_ENABLERichard Henderson
This is the prctl bit that controls whether syscalls accept tagged addresses. See Documentation/arm64/tagged-address-abi.rst in the linux kernel. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-21-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-01-18semihosting: Change common-semi API to be architecture-independentKeith Packard
The public API is now defined in hw/semihosting/common-semi.h. do_common_semihosting takes CPUState * instead of CPUARMState *. All internal functions have been renamed common_semi_ instead of arm_semi_ or arm_. Aside from the API change, there are no functional changes in this patch. Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20210107170717.2098982-3-keithp@keithp.com> Message-Id: <20210108224256.2321-14-alex.bennee@linaro.org>
2020-11-15linux user: Fix Lesser GPL version numberChetan Pant
There is no "version 2" of the "Lesser" General Public License. It is either "GPL version 2.0" or "Lesser GPL version 2.1". This patch replaces all occurrences of "Lesser GPL version 2" with "Lesser GPL version 2.1" in comment section. Signed-off-by: Chetan Pant <chetan4windows@gmail.com> Message-Id: <20201023122455.19417-1-chetan4windows@gmail.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-11-27 10:08:59 +0000