Age | Commit message (Collapse) | Author |
|
Allow balloon.h, gdbstub.h and kvm.h to be included from
non-CPU code.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Code to handle physical memory access is not meaningful in usrmode emulation,
so disable it.
Signed-off-by: Paul Brook <paul@codesourcery.com>
|
|
This grand cleanup drops all reset and vmsave/load related
synchronization points in favor of four(!) generic hooks:
- cpu_synchronize_all_states in qemu_savevm_state_complete
(initial sync from kernel before vmsave)
- cpu_synchronize_all_post_init in qemu_loadvm_state
(writeback after vmload)
- cpu_synchronize_all_post_init in main after machine init
- cpu_synchronize_all_post_reset in qemu_system_reset
(writeback after system reset)
These writeback points + the existing one of VCPU exec after
cpu_synchronize_state map on three levels of writeback:
- KVM_PUT_RUNTIME_STATE (during runtime, other VCPUs continue to run)
- KVM_PUT_RESET_STATE (on synchronous system reset, all VCPUs stopped)
- KVM_PUT_FULL_STATE (on init or vmload, all VCPUs stopped as well)
This level is passed to the arch-specific VCPU state writing function
that will decide which concrete substates need to be written. That way,
no writer of load, save or reset functions that interact with in-kernel
KVM states will ever have to worry about synchronization again. That
also means that a lot of reasons for races, segfaults and deadlocks are
eliminated.
cpu_synchronize_state remains untouched, just as Anthony suggested. We
continue to need it before reading or writing of VCPU states that are
also tracked by in-kernel KVM subsystems.
Consequently, this patch removes many cpu_synchronize_state calls that
are now redundant, just like remaining explicit register syncs.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
|
|
So far we synchronized any dirty VCPU state back into the kernel before
updating the guest debug state. This was a tribute to a deficite in x86
kernels before 2.6.33. But as this is an arch-dependent issue, it is
better handle in the x86 part of KVM and remove the writeback point for
generic code. This also avoids overwriting the flushed state later on if
user space decides to change some more registers before resuming the
guest.
We furthermore need to reinject guest exceptions via the appropriate
mechanism. That is KVM_SET_GUEST_DEBUG for older kernels and
KVM_SET_VCPU_EVENTS for recent ones. Using both mechanisms at the same
time will cause state corruptions.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
|
|
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Change the way the internal qemu signal, used for communication between
iothread and vcpus, is handled.
Block and consume it with sigtimedwait on the outer vcpu loop, which
allows more precise timing control.
Change from standard signal (SIGUSR1) to real-time one, so multiple
signals are not collapsed.
Set the signal number on KVM's in-kernel allowed sigmask.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
remove direct kvm calls from exec.c, make
kvm use memory notifiers framework instead.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
The default action of coalesced MMIO is, cache the writing in buffer, until:
1. The buffer is full.
2. Or the exit to QEmu due to other reasons.
But this would result in a very late writing in some condition.
1. The each time write to MMIO content is small.
2. The writing interval is big.
3. No need for input or accessing other devices frequently.
This issue was observed in a experimental embbed system. The test image
simply print "test" every 1 seconds. The output in QEmu meets expectation,
but the output in KVM is delayed for seconds.
Per Avi's suggestion, I hooked flushing coalesced MMIO buffer in VGA update
handler. By this way, We don't need vcpu explicit exit to QEmu to
handle this issue.
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
|
|
This patch extends the qemu-kvm state sync logic with support for
KVM_GET/SET_VCPU_EVENTS, giving access to yet missing exception,
interrupt and NMI states.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Will be required by succeeding changes.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Unbreaks PowerPC and S390 KVM builds.
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
In the very least, a change like this requires discussion on the list.
The naming convention is goofy and it causes a massive merge problem. Something
like this _must_ be presented on the list first so people can provide input
and cope with it.
This reverts commit 99a0949b720a0936da2052cb9a46db04ffc6db29.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Some not so obvious bits, slirp and Xen were left alone for the time
being.
Signed-off-by: malc <av1474@comtv.ru>
|
|
Problem: Our file sys-queue.h is a copy of the BSD file, but there are
some additions and it's not entirely compatible. Because of that, there have
been conflicts with system headers on BSD systems. Some hacks have been
introduced in the commits 15cc9235840a22c289edbe064a9b3c19c5f49896,
f40d753718c72693c5f520f0d9899f6e50395e94,
96555a96d724016e13190b28cffa3bc929ac60dc and
3990d09adf4463eca200ad964cc55643c33feb50 but the fixes were fragile.
Solution: Avoid the conflict entirely by renaming the functions and the
file. Revert the previous hacks.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
cpu_synchronize_state() is a little unreadable since the 'modified'
argument isn't self-explanatory. Simplify it by making it always
synchronize the kernel state into qemu, and automatically flush the
registers back to the kernel if they've been synchronized on this
exit.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
KVM can have an in-kernel pit or irqchip. While we don't implement it
yet, having a way for test for it (that always returns zero) will allow us
to reuse code in qemu-kvm that tests for it.
Signed-off-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
During startup and after reset we have to synchronize user space to the
in-kernel KVM state. Namely, we need to transfer the VCPU registers when
they change due to VCPU as well as APIC reset.
This patch refactors the required hooks so that kvm_init_vcpu registers
its own per-VCPU reset handler and adds a cpu_synchronize_state to the
APIC reset. That way we no longer depend on the new reset order (and can
drop this disliked interface again) and we can even drop a KVM hook in
main().
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Save and restore all so far neglected KVM-specific CPU states. Handling
the TSC stabilizes migration in KVM mode. The interrupt_bitmap and
mp_state are currently unused, but will become relevant for in-kernel
irqchip support. By including proper saving/restoring already, we avoid
having to increment CPU_SAVE_VERSION later on once again.
v2:
- initialize mp_state runnable (for the boot CPU)
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Extend kvm_physical_sync_dirty_bitmap() so that is can sync across
multiple slots. Useful for updating the whole dirty log during
migration. Moreover, properly pass down errors the whole call chain.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Introduce a global dirty logging flag that enforces logging for all
slots. This can be used by the live migration code to enable/disable
global logging withouth destroying the per-slot setting.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
kvm does not support all cpu features; add support for dunamically querying
the supported feature set.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Avi Kivity wrote:
> Suggest wrapping in a function and hiding it deep inside kvm-all.c.
>
Done in v2:
---------->
If the KVM MMU is asynchronous (kernel does not support MMU_NOTIFIER),
we have to avoid COW for the guest memory. Otherwise we risk serious
breakage when guest pages change there physical locations due to COW
after fork. Seen when forking smbd during runtime via -smb.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Fail loudly if we run out of memory slot.
Make sure that dirty log start/stop works with consistent memory regions
by reporting invalid parameters. This reveals several inconsistencies in
the vga code, patch to fix them follows later in this series.
And, for simplicity reasons, also catch and report unaligned memory
regions passed to kvm_set_phys_mem (KVM works on page basis).
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7138 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
This is a backport of the guest debugging support for the KVM
accelerator that is now part of the KVM tree. It implements the reworked
KVM kernel API for guest debugging (KVM_CAP_SET_GUEST_DEBUG) which is
not yet part of any mainline kernel but will probably be 2.6.30 stuff.
So far supported is x86, but PPC is expected to catch up soon.
Core features are:
- unlimited soft-breakpoints via code patching
- hardware-assisted x86 breakpoints and watchpoints
Changes in this version:
- use generic hook cpu_synchronize_state to transfer registers between
user space and kvm
- push kvm_sw_breakpoints into KVMState
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6825 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
Currently on x86, qemu initializes CPUState but KVM ignores it and does its
own vcpu initialization. However, PowerPC KVM needs to be able to set the
initial register state to support the -kernel and -append options.
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6060 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
MMIO exits are more expensive in KVM or Xen than in QEMU because they
involve, at least, privilege transitions. However, MMIO write
operations can be effectively batched if those writes do not have side
effects.
Good examples of this include VGA pixel operations when in a planar
mode. As it turns out, we can get a nice boost in other areas too.
Laurent mentioned a 9.7% performance boost in iperf with the coalesced
MMIO changes for the e1000 when he originally posted this work for KVM.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5961 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
This adds a VirtIO based balloon driver. It uses madvise() to actually balloon
the memory when possible.
Until 2.6.27, KVM forced memory pinning so we must disable ballooning unless the
kernel actually supports it when using KVM. It's always safe when using TCG.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5874 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
Introduce functions to control logging of memory regions.
We select regions based on its start address, a
guest_physical_addr (target_phys_addr_t, in qemu nomenclature).
The main user of this interface right now is VGA optimization
(a way of reducing the number of mmio exits).
Signed-off-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5792 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
The third argument to ioctl is a ... which allows any value to be passed. In
practice, glibc always treats the argument as a void *.
Do the same thing for the kvm ioctls to keep things consistent with a
traditional ioctl.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5715 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5629 c046a42c-6fe2-441c-8c8c-71466251a162
|