aboutsummaryrefslogtreecommitdiff
path: root/kvm-stub.c
AgeCommit message (Collapse)Author
2013-07-01KVM: Export kvm_init_irq_routingAlexander Graf
On PPC, we can have different types of interrupt controllers, so we really only know that we are going to use one when we created it. Export kvm_init_irq_routing() to common code, so that we don't have to call kvm_irqchip_create(). Signed-off-by: Alexander Graf <agraf@suse.de>
2013-06-28kvm: Change kvm_cpu_exec() argument to CPUStateAndreas Färber
It no longer uses CPUArchState. Prepares for changing qemu_kvm_cpu_thread_fn() opaque to CPUState. Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-06-28kvm: Change kvm_set_signal_mask() argument to CPUStateAndreas Färber
CPUArchState is no longer needed. Prepares for changing qemu_kvm_init_cpu_signals() argument to CPUState. Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-06-28kvm: Change kvm_cpu_synchronize_state() argument to CPUStateAndreas Färber
It no longer relies on CPUArchState since 20d695a. Reviewed-by: liguang <lig.fnst@cn.fujitsu.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-05-29kvm: add kvm_readonly_mem_enabledJordan Justen
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1369816047-16384-3-git-send-email-jordan.l.justen@intel.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-05-01cpu: Call cpu_synchronize_post_init() from DeviceClass::realize()Igor Mammedov
If hotplugged, synchronize CPU state to KVM. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-05-01cpu: Make kvm-stub.o available outside softmmuIgor Mammedov
It will provide stubs for *-user targets once softmmu-specific calls are attempted from common CPU code. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-04-19Merge remote-tracking branch 'mst/tags/for_anthony' into stagingAnthony Liguori
pci: add pci test device This adds a new device that we can use for testing PCI PIO and MMIO, with and without ioeventfd in different configurations. FAST_MMIO will be added if/when kvm supports it. Also included are minor cleanups in kvm APIs that it needs. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Mon 15 Apr 2013 05:42:24 PM CDT using RSA key ID D28D5469 # gpg: Can't check signature: public key not found # By Michael S. Tsirkin # Via Michael S. Tsirkin * mst/tags/for_anthony: pci: add pci test device kvm: support non datamatch ioeventfd kvm: support any size for pio eventfd kvm: remove unused APIs Message-id: cover.1366272004.git.mst@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-16cpu: Pass CPUState to *cpu_synchronize_post*()Igor Mammedov
... so it could be called without requiring CPUArchState. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-04-15include: avoid useless includes of exec/ headersPaolo Bonzini
Headers in include/exec/ are for the deepest innards of QEMU, they should almost never be included directly. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-14kvm: remove unused APIsMichael S. Tsirkin
There are only used internally now, move them out of header and out of stub. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-01-28kvm: Pass CPUState to kvm_on_sigbus_vcpu()Andreas Färber
Since commit 20d695a9254c1b086a456d3b79a3c311236643ba (kvm: Pass CPUState to kvm_arch_*) CPUArchState is no longer needed. Allows to change qemu_kvm_eat_signals() argument as well. Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Gleb Natapov <gleb@redhat.com>
2013-01-15kvm: Pass CPUState to kvm_init_vcpu()Andreas Färber
CPUArchState is no longer needed, and it thereby no longer depends on NEED_CPU_H. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-01-07kvm: add stub for update msi routeMichael S. Tsirkin
Will be used by virtio-pci. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-12-19softmmu: move include files to include/sysemu/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19exec: move include files to include/exec/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-17pci: update all users to look in pci/Michael S. Tsirkin
update all users so we can remove the makefile hack. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-10-22memory: manage coalesced mmio via a MemoryListenerAvi Kivity
Instead of calling a global function on coalesced mmio changes, which routes the call to kvm if enabled, add coalesced mmio hooks to MemoryListener and make kvm use that instead. The motivation is support for multiple address spaces (which means we we need to filter the call on the right address space) but the result is cleaner as well. Signed-off-by: Avi Kivity <avi@redhat.com>
2012-09-09kvm: Clean up irqfd APIJan Kiszka
No need to expose the fd-based interface, everyone will already be fine with the more handy EventNotifier variant. Rename the latter to clarify that we are still talking about irqfds here. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-08-09kvm: Decouple 'GSI routing' from 'kernel irqchip'Peter Maydell
Don't assume having an in-kernel irqchip means that GSI routing is enabled. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-08-09kvm: Decouple 'MSI routing via irqfds' from 'kernel irqchip'Peter Maydell
Decouple another x86-specific assumption about what irqchips imply. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-08-09kvm: Decouple 'irqfds usable' from 'kernel irqchip'Peter Maydell
Instead of assuming that we can use irqfds if and only if kvm_irqchip_in_kernel(), add a bool to the KVMState which indicates this, and is set only on x86 and only if the irqchip is in the kernel. The kernel documentation implies that the only thing you need to use KVM_IRQFD is that KVM_CAP_IRQFD is advertised, but this seems to be untrue. In particular the kernel does not (alas) return a sensible error if you try to set up an irqfd when you haven't created an irqchip. If it did we could remove all this nonsense and let the kernel return the error code. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-08-09kvm: Move kvm_allows_irq0_override() to target-i386, fix return typePeter Maydell
kvm_allows_irq0_override() is a totally x86 specific concept: move it to the target-specific source file where it belongs. This means we need a new header file for the prototype: kvm_i386.h, in line with the existing kvm_ppc.h. While we are moving it, fix the return type to be 'bool' rather than 'int'. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-08-09kvm: Decouple 'async interrupt delivery' from 'kernel irqchip'Peter Maydell
On x86 userspace delivers interrupts to the kernel asynchronously (and therefore VCPU idle management is done in the kernel) if and only if there is an in-kernel irqchip. On other architectures this isn't necessarily true (they may always send interrupts asynchronously), so define a new kvm_async_interrupts_enabled() function instead of misusing kvm_irqchip_in_kernel(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-07-12virtio: move common irqfd handling out of virtio-pciPaolo Bonzini
All transports can use the same event handler for the irqfd, though the exact mechanics of the assignment will be specific. Note that there are three states: handled by the kernel, handled in userspace, disabled. This also lets virtio use event_notifier_set_handler. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-05-21kvm: Enable use of kvm_irqchip_in_kernel in hwlib codeJan Kiszka
Provide a dummy kvm_kernel_irqchip so that kvm_irqchip_in_kernel can be used by code that is not under CONFIG_KVM protection. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-05-21kvm: Introduce kvm_irqchip_add/remove_irqfdJan Kiszka
Add services to associate an eventfd file descriptor as input with an IRQ line as output. Such a line can be an input pin of an in-kernel irqchip or a virtual line returned by kvm_irqchip_add_route. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-05-21kvm: Publicize kvm_irqchip_release_virqJan Kiszka
This allows to drop routes created by kvm_irqchip_add_irq/msi_route again. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-05-21kvm: Introduce kvm_irqchip_add_msi_routeJan Kiszka
Add a service that establishes a static route from a virtual IRQ line to an MSI message. Will be used for IRQFD and device assignment. As we will use this service outside of CONFIG_KVM protected code, stub it properly. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-04-12kvm: Drop unused kvm_pit_in_kernelJan Kiszka
This is now implied by kvm_irqchip_in_kernel. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-04-12kvm: allow arbitrarily sized mmio ioeventfdMichael S. Tsirkin
We use a 2 byte ioeventfd for virtio memory, add support for this. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Amos Kong <akong@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-03-14Rename CPUState -> CPUArchStateAndreas Färber
Scripted conversion: for file in *.[hc] hw/*.[hc] hw/kvm/*.[hc] linux-user/*.[hc] linux-user/m68k/*.[hc] bsd-user/*.[hc] darwin-user/*.[hc] tcg/*/*.[hc] target-*/cpu.h; do sed -i "s/CPUState/CPUArchState/g" $file done All occurrences of CPUArchState are expected to be replaced by QOM CPUState, once all targets are QOM'ified and common fields have been extracted. Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-07kvm: Add kvm_has_pit_state2 helperJan Kiszka
To be used for in-kernel PIT emulation. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-02-08kvm: Implement kvm_irqchip_in_kernel like kvm_enabledJan Kiszka
To both avoid that kvm_irqchip_in_kernel always has to be paired with kvm_enabled and that the former ends up in a function call, implement it like the latter. This means keeping the state in a global variable and defining kvm_irqchip_in_kernel as a preprocessor macro. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-01-19kvm: x86: Establish IRQ0 override controlJan Kiszka
KVM is forced to disable the IRQ0 override when we run with in-kernel irqchip but without IRQ routing support of the kernel. Set the fwcfg value correspondingly. This aligns us with qemu-kvm. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2011-06-26Remove exec-all.h include directivesBlue Swirl
Most exec-all.h include directives are now useless, remove them. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-06-20kvm: Clean up stubsJan Kiszka
No one references kvm_check_extension, kvm_has_vcpu_events, and kvm_has_robust_singlestep outside KVM code. kvm_update_guest_debug is never called, thus has no job besides returning an error. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-04-15Remove unused sysemu.h include directivesBlue Swirl
Remove unused sysemu.h include directives to speed up build with the following patches. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-02-14Introduce log_start/log_stop in CPUPhysMemoryClientAnthony PERARD
In order to use log_start/log_stop with Xen as well in the vga code, this two operations have been put in CPUPhysMemoryClient. The two new functions cpu_physical_log_start,cpu_physical_log_stop are used in hw/vga.c and replace the kvm_log_start/stop. With this, vga does no longer depends on kvm header. [ Jan: rebasing and style fixlets ] Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-02-14kvm: Provide sigbus services arch-independentlyJan Kiszka
Provide arch-independent kvm_on_sigbus* stubs to remove the #ifdef'ery from cpus.c. This patch also fixes --disable-kvm build by providing the missing kvm_on_sigbus_vcpu kvm-stub. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Alexander Graf <agraf@suse.de> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-23kvm: Drop smp_cpus argument from init functionsJan Kiszka
No longer used. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-10kvm: test for ioeventfd support on old kernelsStefan Hajnoczi
There used to be a limit of 6 KVM io bus devices in the kernel. On such a kernel, we can't use many ioeventfds for host notification since the limit is reached too easily. Add an API to test for this condition. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-10-20MCE: Relay UCR MCE to guestMarcelo Tosatti
Port qemu-kvm's commit 4b62fff1101a7ad77553147717a8bd3bf79df7ef Author: Huang Ying <ying.huang@intel.com> Date: Mon Sep 21 10:43:25 2009 +0800 MCE: Relay UCR MCE to guest UCR (uncorrected recovery) MCE is supported in recent Intel CPUs, where some hardware error such as some memory error can be reported without PCC (processor context corrupted). To recover from such MCE, the corresponding memory will be unmapped, and all processes accessing the memory will be killed via SIGBUS. For KVM, if QEMU/KVM is killed, all guest processes will be killed too. So we relay SIGBUS from host OS to guest system via a UCR MCE injection. Then guest OS can isolate corresponding memory and kill necessary guest processes only. SIGBUS sent to main thread (not VCPU threads) will be broadcast to all VCPU threads as UCR MCE. aliguori: fix build Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-08-15Add kvm_set_ioeventfd_mmio_long definition for non-KVM systemsCam Macdonell
Signed-off-by: Cam Macdonell <cam@cs.ualberta.ca> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-07-03remove exec-all.h inclusion from cpu.hPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-04-19provide a stub version of kvm-all.c if !CONFIG_KVMPaolo Bonzini
This allows limited use of kvm functions (which will return ENOSYS) even in once-compiled modules. The patch also improves a bit the error messages for KVM initialization. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> [blauwirbel@gmail.com: fixed Win32 build] Signed-off-by: Blue Swirl <blauwirbel@gmail.com>