aboutsummaryrefslogtreecommitdiff
path: root/kvm-all.c
AgeCommit message (Collapse)Author
2012-06-06kvm: Fix build for non-CAP_IRQ_ROUTING targetsJan Kiszka
A type definition and a KVMState field initialization escaped the required wrapping with KVM_CAP_IRQ_ROUTING. Also, we need to provide a dummy kvm_irqchip_release_virq as virtio-pci references (but does not use) it. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Ben Collins <bcollins@ubuntu.com> Tested-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-05-21kvm: Introduce kvm_irqchip_add/remove_irqfdJan Kiszka
Add services to associate an eventfd file descriptor as input with an IRQ line as output. Such a line can be an input pin of an in-kernel irqchip or a virtual line returned by kvm_irqchip_add_route. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-05-21kvm: Make kvm_irqchip_commit_routes an internal serviceJan Kiszka
Automatically commit route changes after kvm_add_routing_entry and kvm_irqchip_release_virq. There is no performance relevant use case for which collecting multiple route changes is beneficial. This makes kvm_irqchip_commit_routes an internal service which assert()s that the corresponding IOCTL will always succeed. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-05-21kvm: Publicize kvm_irqchip_release_virqJan Kiszka
This allows to drop routes created by kvm_irqchip_add_irq/msi_route again. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-05-21kvm: Introduce kvm_irqchip_add_msi_routeJan Kiszka
Add a service that establishes a static route from a virtual IRQ line to an MSI message. Will be used for IRQFD and device assignment. As we will use this service outside of CONFIG_KVM protected code, stub it properly. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-05-21kvm: Rename kvm_irqchip_add_route to kvm_irqchip_add_irq_routeJan Kiszka
We will add kvm_irqchip_add_msi_route, so let's make the difference clearer. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-05-16kvm: Enable in-kernel irqchip support by defaultJan Kiszka
As MSI is now fully supported by KVM (/wrt available features in upstream), we can finally enable the in-kernel irqchip by default. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-05-16kvm: Add support for direct MSI injectionsJan Kiszka
If the kernel supports KVM_SIGNAL_MSI, we can avoid the route-based MSI injection mechanism. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-05-16kvm: Introduce basic MSI support for in-kernel irqchipsJan Kiszka
This patch basically adds kvm_irqchip_send_msi, a service for sending arbitrary MSI messages to KVM's in-kernel irqchip models. As the original KVM API requires us to establish a static route from a pseudo GSI to the target MSI message and inject the MSI via toggling that virtual IRQ, we need to play some tricks to make this interface transparent. We create those routes on demand and keep them in a hash table. Succeeding messages can then search for an existing route in the table first and reuse it whenever possible. If we should run out of limited GSIs, we simply flush the table and rebuild it as messages are sent. This approach is rather simple and could be optimized further. However, latest kernels contains a more efficient MSI injection interface that will obsolete the GSI-based dynamic injection. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-05-16kvm: Refactor KVMState::max_gsi to gsi_countJan Kiszka
Instead of the bitmap size, store the maximum of GSIs the kernel support. Move the GSI limit assertion to the API function kvm_irqchip_add_route and make it stricter. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-05-10kvm: Fix dirty tracking with large kernel page sizeDavid Gibson
If the kernel page size is larger than TARGET_PAGE_SIZE, which happens for example on ppc64 with kernels compiled for 64K pages, the dirty tracking doesn't work. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-04-12kvm: set gsi_bits and max_gsi correctlyJason Baron
The current kvm_init_irq_routing() doesn't set up the used_gsi_bitmap correctly, and as a consequence pins max_gsi to 32 when it really should be 1024. I ran into this limitation while testing pci passthrough, where I consistently got an -ENOSPC return from kvm_get_irq_route_gsi() called from assigned_dev_update_msix_mmio(). Signed-off-by: Jason Baron <jbaron@redhat.com> Acked-by: Alex Williamson <alex.williamson@redhat.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-04-12kvm: Drop unused kvm_pit_in_kernelJan Kiszka
This is now implied by kvm_irqchip_in_kernel. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-04-12kvm: allow arbitrarily sized mmio ioeventfdMichael S. Tsirkin
We use a 2 byte ioeventfd for virtio memory, add support for this. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Amos Kong <akong@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-03-15kvm: Comparison with ioctl number macros needs to be unsignedDavid Gibson
In kvm-all.c we store an ioctl cmd number in the irqchip_inject_ioctl field of KVMState, which has type 'int'. This seems to make sense since the ioctl() man page says that the cmd parameter has type int. However, the kernel treats ioctl numbers as unsigned - sys_ioctl() takes an unsigned int, and the macros which generate ioctl numbers expand to unsigned expressions. Furthermore, some ioctls (IOC_READ ioctls on x86 and IOC_WRITE ioctls on powerpc) have bit 31 set, and so would be negative if interpreted as an int. This has the surprising and compile-breaking consequence that in kvm_irqchip_set_irq() where we do: return (s->irqchip_inject_ioctl == KVM_IRQ_LINE) ? 1 : event.status; We will get a "comparison is always false due to limited range of data type" warning from gcc if KVM_IRQ_LINE is one of the bit-31-set ioctls, which it is on powerpc. So, despite the fact that the man page and posix say ioctl numbers are signed, they're actually unsigned. The kernel uses unsigned, the glibc header uses unsigned long, and FreeBSD, NetBSD and OSX also use unsigned long ioctl numbers in the code. Therefore, this patch changes the variable to be unsigned, fixing the compile. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-03-14Rename CPUState -> CPUArchStateAndreas Färber
Scripted conversion: for file in *.[hc] hw/*.[hc] hw/kvm/*.[hc] linux-user/*.[hc] linux-user/m68k/*.[hc] bsd-user/*.[hc] darwin-user/*.[hc] tcg/*/*.[hc] target-*/cpu.h; do sed -i "s/CPUState/CPUArchState/g" $file done All occurrences of CPUArchState are expected to be replaced by QOM CPUState, once all targets are QOM'ified and common fields have been extracted. Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-09Merge remote-tracking branch 'stefanha/trivial-patches' into stagingAnthony Liguori
* stefanha/trivial-patches: configure: Quote the configure args printed in config.log osdep: Remove local definition of macro offsetof libcacard: Spelling and grammar fixes in documentation Spelling fixes in comments (it's -> its) vnc: Add break statement libcacard: Use format specifier %u instead of %d for unsigned values Fix sign of sscanf format specifiers block/vmdk: Fix warning from splint (comparision of unsigned value) qmp: Fix spelling fourty -> forty qom: Fix spelling in documentation sh7750: Remove redundant 'struct' from MemoryRegionOps
2012-03-08Spelling fixes in comments (it's -> its)Stefan Weil
* it's -> its (fixed for all files) * dont -> don't (only fixed in a line which was touched by the previous fix) * distrub -> disturb (fixed in the same line) Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-03-07kvm: fill in padding to help valgrindMichael S. Tsirkin
valgrind warns about padding fields which are passed to vcpu ioctls uninitialized. This is not an error in practice because kvm ignored padding. Since the ioctls in question are off data path and the cost is zero anyway, initialize padding to 0 to suppress these errors. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-03-07kvm: Add kvm_has_pit_state2 helperJan Kiszka
To be used for in-kernel PIT emulation. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-03-01Merge remote-tracking branch 'qemu-kvm/memory/urgent' into stagingAnthony Liguori
* qemu-kvm/memory/urgent: kvm: fix unaligned slots
2012-03-01Merge remote-tracking branch 'qemu-kvm/memory/core' into stagingAnthony Liguori
* qemu-kvm/memory/core: (30 commits) memory: allow phys_map tree paths to terminate early memory: unify PhysPageEntry::node and ::leaf memory: change phys_page_set() to set multiple pages memory: switch phys_page_set() to a recursive implementation memory: replace phys_page_find_alloc() with phys_page_set() memory: simplify multipage/subpage registration memory: give phys_page_find() its own tree search loop memory: make phys_page_find() return a MemoryRegionSection memory: move tlb flush to MemoryListener commit callback memory: unify the two branches of cpu_register_physical_memory_log() memory: fix RAM subpages in newly initialized pages memory: compress phys_map node pointers to 16 bits memory: store MemoryRegionSection pointers in phys_map memory: unify phys_map last level with intermediate levels memory: remove first level of l1_phys_map memory: change memory registration to rebuild the memory map on each change memory: support stateless memory listeners memory: split memory listener for the two address spaces xen: ignore I/O memory regions memory: allow MemoryListeners to observe a specific address space ...
2012-03-01kvm: fix unaligned slotsAvi Kivity
kvm_set_phys_mem() may be passed sections that are not aligned to a page boundary. The current code simply brute-forces the alignment which leads to an inconsistency and an abort(). Fix by aligning the start and the end of the section correctly, discarding and unaligned head or tail. This was triggered by a guest sizing a 64-bit BAR that is smaller than a page with PCI_COMMAND_MEMORY enabled and the upper dword clear. Signed-off-by: Avi Kivity <avi@redhat.com>
2012-02-29memory: support stateless memory listenersAvi Kivity
Current memory listeners are incremental; that is, they are expected to maintain their own state, and receive callbacks for changes to that state. This patch adds support for stateless listeners; these work by receiving a ->begin() callback (which tells them that new state is coming), a sequence of ->region_add() and ->region_nop() callbacks, and then a ->commit() callback which signifies the end of the new state. They should ignore ->region_del() callbacks. Signed-off-by: Avi Kivity <avi@redhat.com>
2012-02-29memory: allow MemoryListeners to observe a specific address spaceAvi Kivity
Ignore any regions not belonging to a specified address space. Signed-off-by: Avi Kivity <avi@redhat.com>
2012-02-29memory: move ioeventfd ops to MemoryListenerAvi Kivity
This way the accelerator (kvm) can handle them directly. Signed-off-by: Avi Kivity <avi@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2012-02-29memory: switch memory listeners to a QTAILQAvi Kivity
This allows reverse iteration, which in turns allows consistent ordering among multiple listeners: l1->add l2->add l2->del l1->del Signed-off-by: Avi Kivity <avi@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2012-02-18kvm: Set cpu_single_env only onceJan Kiszka
As we have thread-local cpu_single_env now and KVM uses exactly one thread per VCPU, we can drop the cpu_single_env updates from the loop and initialize this variable only once during setup. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-02-08kvm: Implement kvm_irqchip_in_kernel like kvm_enabledJan Kiszka
To both avoid that kvm_irqchip_in_kernel always has to be paired with kvm_enabled and that the former ends up in a function call, implement it like the latter. This means keeping the state in a global variable and defining kvm_irqchip_in_kernel as a preprocessor macro. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-02-02KVM: Fix compilation on non-x86Alexander Graf
Commit 84b058d broke compilation for KVM on non-x86 targets, which don't have KVM_CAP_IRQ_ROUTING defined. Fix by not using the unavailable constant when it's not around. Signed-off-by: Alexander Graf <agraf@suse.de>
2012-01-25memory: change dirty setting APIs to take a sizeBlue Swirl
Instead of each target knowing or guessing the guest page size, just pass the desired size of dirtied memory area. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-01-23Merge remote-tracking branch 'qemu-kvm/uq/master' into stagingAnthony Liguori
* qemu-kvm/uq/master: kvm: Activate in-kernel irqchip support kvm: x86: Add user space part for in-kernel IOAPIC kvm: x86: Add user space part for in-kernel i8259 kvm: x86: Add user space part for in-kernel APIC kvm: x86: Establish IRQ0 override control kvm: Introduce core services for in-kernel irqchip support memory: Introduce memory_region_init_reservation ioapic: Factor out base class for KVM reuse ioapic: Drop post-load irr initialization i8259: Factor out base class for KVM reuse i8259: Completely privatize PicState apic: Open-code timer save/restore apic: Factor out base class for KVM reuse apic: Introduce apic_report_irq_delivered apic: Inject external NMI events via LINT1 apic: Stop timer on reset kvm: Move kvmclock into hw/kvm folder msi: Generalize msix_supported to msi_supported hyper-v: initialize Hyper-V CPUID leaves. hyper-v: introduce Hyper-V support infrastructure. Conflicts: Makefile.target Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-01-21Fix dirty logging with 32-bit qemu & 64-bit guestsBenjamin Herrenschmidt
The kvm_get_dirty_pages_log_range() function uses two address variables to step through the monitored memory region to update the dirty log. However, these variables have type unsigned long, which can overflow if running a 64-bit guest with a 32-bit qemu binary. This patch changes these to target_phys_addr_t which will have the correct size. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-01-19kvm: x86: Establish IRQ0 override controlJan Kiszka
KVM is forced to disable the IRQ0 override when we run with in-kernel irqchip but without IRQ routing support of the kernel. Set the fwcfg value correspondingly. This aligns us with qemu-kvm. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2012-01-19kvm: Introduce core services for in-kernel irqchip supportJan Kiszka
Add the basic infrastructure to active in-kernel irqchip support, inject interrupts into these models, and maintain IRQ routes. Routing is optional and depends on the host arch supporting KVM_CAP_IRQ_ROUTING. When it's not available on x86, we looe the HPET as we can't route GSI0 to IOAPIC pin 2. In-kernel irqchip support will once be controlled by the machine property 'kernel_irqchip', but this is not yet wired up. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2012-01-15kvm: flush the dirty log when unregistering a slotAvi Kivity
Otherwise, the dirty log information is lost in the kernel forever. Fixes opensuse-12.1 boot screen, which changes the vga windows rapidly. Signed-off-by: Avi Kivity <avi@redhat.com>
2012-01-03kvm: avoid cpu_get_physical_page_desc()Avi Kivity
This reaches into the innards of the memory core, which are being changed. Switch to a memory API version. Signed-off-by: Avi Kivity <avi@redhat.com>
2011-12-20kvm: convert to MemoryListener APIAvi Kivity
Drop the use of cpu_register_phys_memory_client() in favour of the new MemoryListener API. The new API simplifies the caller, since there is no need to deal with splitting and merging slots; however this is not exploited in this patch. Signed-off-by: Avi Kivity <avi@redhat.com>
2011-12-20kvm: switch kvm slots to use host virtual address instead of ram_addr_tAvi Kivity
This simplifies a later switch to the memory API in slot management. Signed-off-by: Avi Kivity <avi@redhat.com>
2011-12-16kvm: Print something before calling abort() if KVM_RUN failsMichael Ellerman
It's a little unfriendly to call abort() without printing any sort of error message. So turn the DPRINTK() into an fprintf(stderr, ...). Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-11-01kvm_init didn't set return value after create vm failedXu He Jie
And kvm_ioctl(s, KVM_CREATE_VM, 0)'s return value can be < -1, so change the check of vmfd at label 'err'. Signed-off-by: Xu He Jie <xuhj@linux.vnet.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-10-24kvm: avoid reentring kvm_flush_coalesced_mmio_buffer()Avi Kivity
mmio callbacks invoked by kvm_flush_coalesced_mmio_buffer() may themselves indirectly call kvm_flush_coalesced_mmio_buffer(). Prevent reentering the function by checking a flag that indicates we're processing coalesced mmio requests. Signed-off-by: Avi Kivity <avi@redhat.com>
2011-10-04RunState: Rename enum values as generated by the QAPILuiz Capitulino
Next commit will convert the query-status command to use the RunState type as generated by the QAPI. In order to "transparently" replace the current enum by the QAPI one, we have to make some changes to some enum values. As the changes are simple renames, I'll do them in one shot. The changes are: - Rename the prefix from RSTATE_ to RUN_STATE_ - RUN_STATE_SAVEVM to RUN_STATE_SAVE_VM - RUN_STATE_IN_MIGRATE to RUN_STATE_INMIGRATE - RUN_STATE_PANICKED to RUN_STATE_INTERNAL_ERROR - RUN_STATE_POST_MIGRATE to RUN_STATE_POSTMIGRATE - RUN_STATE_PRE_LAUNCH to RUN_STATE_PRELAUNCH - RUN_STATE_PRE_MIGRATE to RUN_STATE_PREMIGRATE - RUN_STATE_RESTORE to RUN_STATE_RESTORE_VM - RUN_STATE_PRE_MIGRATE to RUN_STATE_FINISH_MIGRATE Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-09-15Replace the VMSTOP macros with a proper state typeLuiz Capitulino
Today, when notifying a VM state change with vm_state_notify(), we pass a VMSTOP macro as the 'reason' argument. This is not ideal because the VMSTOP macros tell why qemu stopped and not exactly what the current VM state is. One example to demonstrate this problem is that vm_start() calls vm_state_notify() with reason=0, which turns out to be VMSTOP_USER. This commit fixes that by replacing the VMSTOP macros with a proper state type called RunState. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-09-02main: force enabling of I/O threadAnthony Liguori
Enabling the I/O thread by default seems like an important part of declaring 1.0. Besides allowing true SMP support with KVM, the I/O thread means that the TCG VCPU doesn't have to multiplex itself with the I/O dispatch routines which currently requires a (racey) signal based alarm system. I know there have been concerns about performance. I think so far the ones that have come up (virtio-net) are most likely due to secondary reasons like decreased batching. I think we ought to force enabling I/O thread early in 1.0 development and commit to resolving any lingering issues. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-20Use glib memory allocation and free functionsAnthony Liguori
qemu_malloc/qemu_free no longer exist after this commit. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-05kvm: Drop obsolete KVM_IOEVENTFD #ifdefsJan Kiszka
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-06-20kvm: Drop KVM_CAP build dependenciesJan Kiszka
No longer needed with accompanied kernel headers. We are only left with build dependencies that are controlled by kvm arch headers. CC: Alexander Graf <agraf@suse.de> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-06-20kvm: Drop useless zero-initializationsJan Kiszka
Backing KVMState is alreay zero-initialized. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-05-09kvm: ppc: warn user on PAGE_SIZE mismatchAlexander Graf
On PPC, the default PAGE_SIZE is 64kb. Unfortunately, the hardware alignments don't match here: There are RAM and MMIO regions within a single page when it's 64kb in size. So the only way out for now is to tell the user that he should use 4k PAGE_SIZE. This patch gives the user a hint on that, telling him that failing to register a prefix slot is most likely to be caused by mismatching PAGE_SIZE. This way it's also more future-proof, as bigger PAGE_SIZE can easily be supported by other machines then, as long as they stick to 64kb granularities. Signed-off-by: Alexander Graf <agraf@suse.de>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-20 00:52:24 +0000