aboutsummaryrefslogtreecommitdiff
path: root/kvm-all.c
AgeCommit message (Collapse)Author
2017-03-14qemu-timer: do not include sysemu/cpus.h from util/qemu-timer.hPaolo Bonzini
This dependency is the wrong way, and we will need util/qemu-timer.h from sysemu/cpus.h in the next patch. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-03-03KVM: use KVM_CAP_IMMEDIATE_EXITPaolo Bonzini
The purpose of the KVM_SET_SIGNAL_MASK API is to let userspace "kick" a VCPU out of KVM_RUN through a POSIX signal. A signal is attached to a dummy signal handler; by blocking the signal outside KVM_RUN and unblocking it inside, this possible race is closed: VCPU thread service thread -------------------------------------------------------------- check flag set flag raise signal (signal handler does nothing) KVM_RUN However, one issue with KVM_SET_SIGNAL_MASK is that it has to take tsk->sighand->siglock on every KVM_RUN. This lock is often on a remote NUMA node, because it is on the node of a thread's creator. Taking this lock can be very expensive if there are many userspace exits (as is the case for SMP Windows VMs without Hyper-V reference time counter). KVM_CAP_IMMEDIATE_EXIT provides an alternative, where the flag is placed directly in kvm_run so that KVM can see it: VCPU thread service thread -------------------------------------------------------------- raise signal signal handler set run->immediate_exit KVM_RUN check run->immediate_exit The previous patches changed QEMU so that the only blocked signal is SIG_IPI, so we can now stop using KVM_SET_SIGNAL_MASK and sigtimedwait if KVM_CAP_IMMEDIATE_EXIT is available. On a 14-VCPU guest, an "inl" operation goes down from 30k to 6k on an unlocked (no BQL) MemoryRegion, or from 30k to 15k if the BQL is involved. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-03-03kvm: use atomic_read/atomic_set to access cpu->exit_requestPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-03-03KVM: move SIG_IPI handling to kvm-all.cPaolo Bonzini
This lets us remove a bunch of CONFIG_LINUX defines. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-03-03KVM: do not use sigtimedwait to catch SIGBUSPaolo Bonzini
Call kvm_on_sigbus_vcpu asynchronously from the VCPU thread. Information for the SIGBUS can be stored in thread-local variables and processed later in kvm_cpu_exec. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-03-03KVM: remove kvm_arch_on_sigbusPaolo Bonzini
Build it on kvm_arch_on_sigbus_vcpu instead. They do the same for "action optional" SIGBUSes, and the main thread should never get "action required" SIGBUSes because it blocks the signal. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-02-16report guest crash information in GUEST_PANICKED eventAnton Nefedov
it's not very convenient to use the crash-information property interface, so provide a CPU class callback to get the guest crash information, and pass that information in the event Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Message-Id: <1487053524-18674-3-git-send-email-den@openvz.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-02-16i386/cpu: add crash-information QOM propertyAnton Nefedov
Windows reports BSOD parameters through Hyper-V crash MSRs. This information is very useful for initial crash analysis and thus it would be nice to have a way to fetch it. Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Message-Id: <1487053524-18674-2-git-send-email-den@openvz.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-31trace: switch to modular code generation for sub-directoriesDaniel P. Berrange
Introduce rules in the top level Makefile that are able to generate trace.[ch] files in every subdirectory which has a trace-events file. The top level directory is handled specially, so instead of creating trace.h, it creates trace-root.h. This allows sub-directories to include the top level trace-root.h file, without ambiguity wrt to the trace.g file in the current sub-dir. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170125161417.31949-7-berrange@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-10-31*_run_on_cpu: introduce run_on_cpu_data typePaolo Bonzini
This changes the *_run_on_cpu APIs (and helpers) to pass data in a run_on_cpu_data type instead of a plain void *. This is because we sometimes want to pass a target address (target_ulong) and this fails on 32 bit hosts emulating 64 bit guests. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20161027151030.20863-24-alex.bennee@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-23kvm-all: don't use stale dbg_data->cpuAlex Bennée
The changes to run_on_cpu and friends mean that all helpers are passed the CPUState of vCPU they are running on. The conversion missed the field in commit e0eeb4a21a3ca4b296220ce4449d8acef9de9049 which introduced bugs. Reported-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com> Tested-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20161010154625.14881-1-alex.bennee@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-04kvm-all: Pass requester ID to MSI routing functionsPavel Fedin
Introduce global kvm_msi_use_devid flag plus associated kvm_msi_devid_required() macro. Passes the device ID, if needed, while building the MSI route entry. Device IDs are required by the ARM GICv3 ITS (IRQ remapping function is based on this information). Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Signed-off-by: Eric Auger <eric.auger@redhat.com> Message-id: 1474616617-366-5-git-send-email-eric.auger@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-27cpus: pass CPUState to run_on_cpu helpersAlex Bennée
CPUState is a fairly common pointer to pass to these helpers. This means if you need other arguments for the async_run_on_cpu case you end up having to do a g_malloc to stuff additional data into the routine. For the current users this isn't a massive deal but for MTTCG this gets cumbersome when the only other parameter is often an address. This adds the typedef run_on_cpu_func for helper functions which has an explicit CPUState * passed as the first parameter. All the users of run_on_cpu and async_run_on_cpu have had their helpers updated to use CPUState where available. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> [Sergey Fedorov: - eliminate more CPUState in user data; - remove unnecessary user data passing; - fix target-s390x/kvm.c and target-s390x/misc_helper.c] Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org> Acked-by: David Gibson <david@gibson.dropbear.id.au> (ppc parts) Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> (s390 parts) Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <1470158864-17651-3-git-send-email-alex.bennee@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-09-13kvm-all: drop kvm_setup_guest_memoryCao jin
kvm_setup_guest_memory only does "madvise to QEMU_MADV_DONTFORK" and is only called by ram_block_add, which actually is duplicate code. Bonus: add simple comment for kvm_has_sync_mmu to make life easier. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com> Message-Id: <1473662096-32598-1-git-send-email-caoj.fnst@cn.fujitsu.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-08-08error: Fix error_printf() calls lacking newlinesMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1470224274-31522-5-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2016-08-03kvm-irqchip: only commit route when irqchip is usedPeter Xu
Reported from Alexey Kardashevskiy: 3f1fea0fb5bf "kvm-irqchip: do explicit commit when update irq" produces a crash on pseries guest running with VFIO on POWER8 machine as it does not support KVM_CAP_IRQCHIP (KVM_CAP_IRQ_XICS is there instead). At the result, KVMState::irq_routes is NULL when VFIO calls kvm_irqchip_commit_routes. This makes the routing update conditional. Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru> Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-07-21kvm-all: add trace events for kvm irqchip opsPeter Xu
These will help us monitoring irqchip route activities more easily. Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-07-21kvm-irqchip: do explicit commit when update irqPeter Xu
In the past, we are doing gsi route commit for each irqchip route update. This is not efficient if we are updating lots of routes in the same time. This patch removes the committing phase in kvm_irqchip_update_msi_route(). Instead, we do explicit commit after all routes updated. Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-07-21kvm-irqchip: x86: add msi route notify fnPeter Xu
One more IEC notifier is added to let msi routes know about the IEC changes. When interrupt invalidation happens, all registered msi routes will be updated for all PCI devices. Since both vfio and vhost are possible gsi route consumers, this patch will go one step further to keep them safe in split irqchip mode and when irqfd is enabled. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> [move trace-events lines into target-i386/trace-events] Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-07-21kvm-irqchip: i386: add hook for add/remove virqPeter Xu
Adding two hooks to be notified when adding/removing msi routes. There are two kinds of MSI routes: - in kvm_irqchip_add_irq_route(): before assigning IRQFD. Used by vhost, vfio, etc. - in kvm_irqchip_send_msi(): when sending direct MSI message, if direct MSI not allowed, we will first create one MSI route entry in the kernel, then trigger it. This patch only hooks the first one (irqfd case). We do not need to take care for the 2nd one, since it's only used by QEMU userspace (kvm-apic) and the messages will always do in-time translation when triggered. While we need to note them down for the 1st one, so that we can notify the kernel when cache invalidation happens. Also, we do not hook IOAPIC msi routes (we have explicit notifier for IOAPIC to keep its cache updated). We only need to care about irqfd users. Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-07-21kvm-irqchip: simplify kvm_irqchip_add_msi_routePeter Xu
Changing the original MSIMessage parameter in kvm_irqchip_add_msi_route into the vector number. Vector index provides more information than the MSIMessage, we can retrieve the MSIMessage using the vector easily. This will avoid fetching MSIMessage every time before adding MSI routes. Meanwhile, the vector info will be used in the coming patches to further enable gsi route update notifications. Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-16KVM: use KVM_CAP_MAX_VCPU_IDGreg Kurz
As stated in linux/Documentation/virtual/kvm/api.txt: The maximum possible value for max_vcpu_id can be retrieved using the KVM_CAP_MAX_VCPU_ID of the KVM_CHECK_EXTENSION ioctl() at run-time. If the KVM_CAP_MAX_VCPU_ID does not exist, you should assume that max_vcpu_id is the same as the value returned from KVM_CAP_MAX_VCPUS. Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Message-Id: <146424974323.5666.5471538288045048119.stgit@bahia.huguette.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-16os-posix: include sys/mman.hPaolo Bonzini
qemu/osdep.h checks whether MAP_ANONYMOUS is defined, but this check is bogus without a previous inclusion of sys/mman.h. Include it in sysemu/os-posix.h and remove it from everywhere else. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-07kvm: API to obtain max supported mem slotsBharata B Rao
Introduce kvm_get_max_memslots() API that can be used to obtain the maximum number of memslots supported by KVM. Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-05-30cpu: Reclaim vCPU objectsGu Zheng
In order to deal well with the kvm vcpus (which can not be removed without any protection), we do not close KVM vcpu fd, just record and mark it as stopped into a list, so that we can reuse it for the appending cpu hot-add request if possible. It is also the approach that kvm guys suggested: https://www.mail-archive.com/kvm@vger.kernel.org/msg102839.html Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com> Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com> Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> [- Explicit CPU_REMOVE() from qemu_kvm/tcg_destroy_vcpu() isn't needed as it is done from cpu_exec_exit() - Use iothread mutex instead of global mutex during destroy - Don't cleanup vCPU object from vCPU thread context but leave it to the callers (device_add/device_del)] Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-05-27PPC/KVM: early validation of vcpu idGreg Kurz
The KVM API restricts vcpu ids to be < KVM_CAP_MAX_VCPUS. On PowerPC targets, depending on the number of threads per core in the host and in the guest, some topologies do generate higher vcpu ids actually. When this happens, QEMU bails out with the following error: kvm_init_vcpu failed: Invalid argument The KVM_CREATE_VCPU ioctl has several EINVAL return paths, so it is not possible to fully disambiguate. This patch adds a check in the code that computes vcpu ids, so that we can detect the error earlier, and print a friendlier message instead of calling KVM_CREATE_VCPU with an obviously bogus vcpu id. Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-05-18Fix some typos found by codespellStefan Weil
Signed-off-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-03-30kvm: add kvm_device_supported() helper functionPeter Xu
This can be used when probing whether KVM support specific device. Here, a raw vmfd is used. Signed-off-by: Peter Xu <peterx@redhat.com> Acked-by: Sergey Fedorov <serge.fdrv@gmail.com> Message-id: 1458788142-17509-4-git-send-email-peterx@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-07kvm/irqchip: use bitmap utility for gsi trackingWei Yang
By using utilities in bitops and bitmap, this patch tries to make it more friendly to audience. No functional change. Signed-off-by: Wei Yang <richard.weiyang@gmail.com> Message-Id: <1457229445-25954-1-git-send-email-richard.weiyang@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-07memory: Drop MemoryRegion.ram_addrFam Zheng
All references to mr->ram_addr are replaced by memory_region_get_ram_addr(mr) (except for a few assertions that are replaced with mr->ram_block). Reviewed-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: Fam Zheng <famz@redhat.com> Message-Id: <1456813104-25902-5-git-send-email-famz@redhat.com> Acked-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-09kvm-all: trace: strerror fixupAndrew Jones
Signed-off-by: Andrew Jones <drjones@redhat.com> Message-Id: <1454355464-14999-1-git-send-email-drjones@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-04all: Clean up includesPeter Maydell
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1454089805-5470-16-git-send-email-peter.maydell@linaro.org
2016-01-13error: Clean up errors with embedded newlines (again)Markus Armbruster
The arguments of error_report() should yield a short error string without newlines. A few places try to print additional help after the error message by embedding newlines in the error string. That's nice, but let's do it the right way. Commit 474c213 cleaned up some, but they keep coming back. Offenders tracked down with the Coccinelle semantic patch from commit 312fd5f. Cc: Laszlo Ersek <lersek@redhat.com> Cc: Pavel Fedin <p.fedin@samsung.com> Signed-off-by: Markus Armbruster <armbru@pond.sub.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-12-17kvm: x86: add support for KVM_CAP_SPLIT_IRQCHIPPaolo Bonzini
This patch adds support for split IRQ chip mode. When KVM_CAP_SPLIT_IRQCHIP is enabled: 1.) The PIC, PIT, and IOAPIC are implemented in userspace while the LAPIC is implemented by KVM. 2.) The software IOAPIC delivers interrupts to the KVM LAPIC via kvm_set_irq. Interrupt delivery is configured via the MSI routing table, for which routes are reserved in target-i386/kvm.c then configured in hw/intc/ioapic.c 3.) KVM delivers IOAPIC EOIs via a new exit KVM_EXIT_IOAPIC_EOI, which is handled in target-i386/kvm.c and relayed to the software IOAPIC via ioapic_eoi_broadcast. Signed-off-by: Matt Gingell <gingell@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-17kvm: Hyper-V SynIC irq routing supportAndrey Smetanin
Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com> Reviewed-by: Roman Kagan <rkagan@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Richard Henderson <rth@twiddle.net> CC: Eduardo Habkost <ehabkost@redhat.com> CC: "Andreas Färber" <afaerber@suse.de> CC: Marcelo Tosatti <mtosatti@redhat.com> CC: Roman Kagan <rkagan@virtuozzo.com> CC: Denis V. Lunev <den@openvz.org> CC: kvm@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-17memory: emulate ioeventfdPavel Fedin
The ioeventfd mechanism is used by vhost, dataplane, and virtio-pci to turn guest MMIO/PIO writes into eventfd file descriptor events. This allows arbitrary threads to be notified when the guest writes to a specific MMIO/PIO address. qtest and TCG do not support ioeventfd because memory writes are not checked against registered ioeventfds in QEMU. This patch implements this in memory_region_dispatch_write() so qtest can use ioeventfd. Also this patch fixes vhost aborting on some misconfigured old kernels like 3.18.0 on ARM. It is possible to explicitly enable CONFIG_EVENTFD in expert settings, while MMIO binding support in KVM will still be missing. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Message-Id: <006e01d12377$0b9c2d40$22d487c0$@samsung.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-17kvm-all: PAGE_SIZE should be real host page sizeAndrew Jones
Just noticed this while grepping TARGET_PAGE_SIZE for an unrelated reason. I didn't use qemu_real_host_page_size as kvm_set_phys_mem() does, because we'd need to make sure page_size_init() has run first. Signed-off-by: Andrew Jones <drjones@redhat.com> Message-Id: <1447115022-4142-1-git-send-email-drjones@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-12KVM: add support for any length io eventfdJason Wang
Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-10Move page_size_init earlierDr. David Alan Gilbert
The HOST_PAGE_ALIGN macros don't work until the page size variables have been set up; later in postcopy I use those macros in the RAM code, and it can be triggered using -object. Fix this by initialising page_size_init() earlier - it's currently initialised inside the accelerators, move it up into vl.c. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-11-05Revert "Introduce cpu_clean_all_dirty"Liang Li
This reverts commit de9d61e83d43be9069e6646fa9d57a3f47779d28. Now 'cpu_clean_all_dirty' is useless, we can revert the related code. Conflicts: include/sysemu/kvm.h Signed-off-by: Liang Li <liang.z.li@intel.com> Message-Id: <1446695464-27116-3-git-send-email-liang.z.li@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-19kvm: Move x86-specific functions into target-i386/kvm.cThomas Huth
The functions for checking xcrs, xsave and pit_state2 are only used on x86, so they should reside in target-i386/kvm.c. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1444933820-6968-1-git-send-email-thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-19kvm: Pass PCI device pointer to MSI routing functionsPavel Fedin
In-kernel ITS emulation on ARM64 will require to supply requester IDs. These IDs can now be retrieved from the device pointer using new pci_requester_id() function. This patch adds pci_dev pointer to KVM GSI routing functions and makes callers passing it. x86 architecture does not use requester IDs, but hw/i386/kvm/pci-assign.c also made passing PCI device pointer instead of NULL for consistency with the rest of the code. Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Message-Id: <ce081423ba2394a4efc30f30708fca07656bc500.1444916432.git.p.fedin@samsung.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-19kvm: Make KVM_CAP_SIGNAL_MSI globally availablePavel Fedin
This capability is useful to determine whether we can use KVM ITS emulation on ARM Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Message-Id: <ff4ccb09b837d37defd639b885526949a25276de.1444916432.git.p.fedin@samsung.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-12kvm-all: Align to qemu_real_host_page_size in kvm_set_phys_memAlexey Kardashevskiy
As the comment in kvm_set_phys_mem() says, KVM works in page size chunks. However it uses hardcoded TARGET_PAGE_SIZE which is 4K on most platforms while actual host may use different page size, for example, PPC64 hosts use 64K system pages. This replaces static TARGET_PAGE_SIZE with run-time calculated qemu_real_host_page_size. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Message-Id: <1444102257-17405-1-git-send-email-aik@ozlabs.ru> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-24intc/gic: Extract some reusable vGIC codePavel Fedin
Some functions previously used only by vGICv2 are useful also for vGICv3 implementation. Untie them from GICState and make accessible from within other modules: - kvm_arm_gic_set_irq() - kvm_gic_supports_attr() - moved to common code and renamed to kvm_device_check_attr() - kvm_gic_access() - turned into GIC-independent kvm_device_access(). Data pointer changed to void * because some GICv3 registers are 64-bit wide Some of these changes are not used right now, but they will be helpful for implementing live migration. Actually kvm_dist_get() and kvm_dist_put() could also be made reusable, but they would require two extra parameters (s->dev_fd and s->num_cpu) as well as lots of typecasts of 's' to DeviceState * and back to GICState *. This makes the code very ugly so i decided to stop at this point. I tried also an approach with making a base class for all possible GICs, but it would contain only three variables (dev_fd, cpu_num and irq_num), and accessing them through the rest of the code would be again tedious (either ugly casts or qemu-style separate object pointer). So i disliked it too. Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Tested-by: Ashok kumar <ashoks@broadcom.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 2ef56d1dd64ffb75ed02a10dcdaf605e5b8ff4f8.1441784344.git.p.fedin@samsung.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-16kvm: Add kvm system event crash handlerAndrey Smetanin
KVM kernel can send guest crash events into userspace. Appropriate guest crash handler is called when kernel guest crash event received. Guest crash event recognized by a KVM_SYSTEM_EVENT_CRASH type of system event. Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Andreas Färber <afaerber@suse.de> Message-Id: <1435924905-8926-11-git-send-email-den@openvz.org> [Rebase: add lock/unlock iothread around qemu_system_guest_panicked - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-07s390x/kvm: make setting of in-kernel irq routes more efficientJens Freimann
When we add new adapter routes we call kvm_irqchip_add_route() for every virtqueue and in the same step also do the KVM_SET_GSI_ROUTING ioctl. This is unnecessary costly as the interface allows us to set multiple routes in one go. Let's first add all routes to the table stored in the global kvm_state and then do the ioctl to commit the routes to the in-kernel irqchip. This saves us several ioctls to the kernel where for each call a list is reallocated and populated. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-07-07Merge remote-tracking branch 'remotes/awilliam/tags/vfio-update-20150706.0' ↵Peter Maydell
into staging VFIO updates for 2.4-rc0 - "real" host page size API (Peter Crosthwaite) - platform device irqfd support (Eric Auger) - spapr container disconnect fix (Alexey Kardashevskiy) - quirk for broken Chelsio hardware (Gabriel Laupre) - coverity fix (Paolo Bonzini) # gpg: Signature made Mon Jul 6 19:23:49 2015 BST using RSA key ID 3BB08B22 # gpg: Good signature from "Alex Williamson <alex.williamson@redhat.com>" # gpg: aka "Alex Williamson <alex@shazbot.org>" # gpg: aka "Alex Williamson <alwillia@redhat.com>" # gpg: aka "Alex Williamson <alex.l.williamson@gmail.com>" * remotes/awilliam/tags/vfio-update-20150706.0: vfio/pci : Add pba_offset PCI quirk for Chelsio T5 devices vfio: Unregister IOMMU notifiers when container is destroyed hw/vfio/platform: add irqfd support kvm: some fixes to kvm_resamplefds_allowed sysbus: add irq_routing_notifier intc: arm_gic_kvm: set the qemu_irq/gsi mapping kvm-all.c: add qemu_irq/gsi hash table and utility routines kvm: rename kvm_irqchip_[add,remove]_irqfd_notifier with gsi suffix vfio: cpu: Use "real" page size API cpu-all: complete "real" host page size API vfio: fix return type of pread Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Conflicts: kvm-all.c
2015-07-06kvm-all.c: add qemu_irq/gsi hash table and utility routinesEric Auger
VFIO platform device needs to setup irqfd but it does not know the gsi corresponding to the device qemu_irq. This patch proposes to store a hash table in kvm_state using the qemu_irq as key and the gsi as a value. kvm_irqchip_set_qemuirq_gsi allows to insert such a pair. The interrupt controller is supposed to use it. kvm_irqchip_[add, remove]_irqfd_notifier allows to setup/tear down irqfd directly from the qemu_irq. Signed-off-by: Eric Auger <eric.auger@linaro.org> Tested-by: Vikram Sethi <vikrams@codeaurora.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-07-06kvm: rename kvm_irqchip_[add,remove]_irqfd_notifier with gsi suffixEric Auger
Anticipating for the introduction of new add/remove functions taking a qemu_irq parameter, let's rename existing ones with a gsi suffix. Signed-off-by: Eric Auger <eric.auger@linaro.org> Tested-by: Vikram Sethi <vikrams@codeaurora.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-11-23 05:19:46 +0000