Age | Commit message (Collapse) | Author |
|
The `aio-max-batch` parameter will be propagated to AIO engines
and it will be used to control the maximum number of queued requests.
When there are in queue a number of requests equal to `aio-max-batch`,
the engine invokes the system call to forward the requests to the kernel.
This parameter allows us to control the maximum batch size to reduce
the latency that requests might accumulate while queued in the AIO
engine queue.
If `aio-max-batch` is equal to 0 (default value), the AIO engine will
use its default maximum batch size value.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20210721094211.69853-3-sgarzare@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Changes in preparation for next patches where we add a new
parameter not related to the poll mechanism.
Let's add two new generic functions (iothread_set_param and
iothread_get_param) that we use to set and get IOThread
parameters.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20210721094211.69853-2-sgarzare@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
If we want to wake up a coroutine from a worker thread, aio_co_wake()
currently does not work. In that scenario, aio_co_wake() calls
aio_co_enter(), but there is no current AioContext and therefore
qemu_get_current_aio_context() returns the main thread. aio_co_wake()
then attempts to call aio_context_acquire() instead of going through
aio_co_schedule().
The default case of qemu_get_current_aio_context() was added to cover
synchronous I/O started from the vCPU thread, but the main and vCPU
threads are quite different. The main thread is an I/O thread itself,
only running a more complicated event loop; the vCPU thread instead
is essentially a worker thread that occasionally calls
qemu_mutex_lock_iothread(). It is only in those critical sections
that it acts as if it were the home thread of the main AioContext.
Therefore, this patch detaches qemu_get_current_aio_context() from
iothreads, which is a useless complication. The AioContext pointer
is stored directly in the thread-local variable, including for the
main loop. Worker threads (including vCPU threads) optionally behave
as temporary home threads if they have taken the big QEMU lock,
but if that is not the case they will always schedule coroutines
on remote threads via aio_co_schedule().
With this change, the stub qemu_mutex_iothread_locked() must be changed
from true to false. The previous value of true was needed because the
main thread did not have an AioContext in the thread-local variable,
but now it does have one.
Reported-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210609122234.544153-1-pbonzini@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Tested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
[eblake: tweak commit message per Vladimir's review]
Signed-off-by: Eric Blake <eblake@redhat.com>
|
|
Defines MPQemuMsg, which is the message that is sent to the remote
process. This message is sent over QIOChannel and is used to
command the remote process to perform various tasks.
Define transmission functions used by proxy and by remote.
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 56ca8bcf95195b2b195b08f6b9565b6d7410bce5.1611938319.git.jag.raman@oracle.com
[Replace struct iovec send[2] = {0} with {} to make clang happy as
suggested by Peter Maydell <peter.maydell@linaro.org>.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
The easiest spots to use QAPI_LIST_APPEND are where we already have an
obvious pointer to the tail of a list. While at it, consistently use
the variable name 'tail' for that purpose.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210113221013.390592-5-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
clang's C11 atomic_fetch_*() functions only take a C11 atomic type
pointer argument. QEMU uses direct types (int, etc) and this causes a
compiler error when a QEMU code calls these functions in a source file
that also included <stdatomic.h> via a system header file:
$ CC=clang CXX=clang++ ./configure ... && make
../util/async.c:79:17: error: address argument to atomic operation must be a pointer to _Atomic type ('unsigned int *' invalid)
Avoid using atomic_*() names in QEMU's atomic.h since that namespace is
used by <stdatomic.h>. Prefix QEMU's APIs with 'q' so that atomic.h
and <stdatomic.h> can co-exist. I checked /usr/include on my machine and
searched GitHub for existing "qatomic_" users but there seem to be none.
This patch was generated using:
$ git grep -h -o '\<atomic\(64\)\?_[a-z0-9_]\+' include/qemu/atomic.h | \
sort -u >/tmp/changed_identifiers
$ for identifier in $(</tmp/changed_identifiers); do
sed -i "s%\<$identifier\>%q$identifier%g" \
$(git grep -I -l "\<$identifier\>")
done
I manually fixed line-wrap issues and misaligned rST tables.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200923105646.47864-1-stefanha@redhat.com>
|
|
Generated using:
$ ./scripts/codeconverter/converter.py -i \
--pattern=TypeCheckMacro $(git grep -l '' -- '*.[ch]')
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-12-ehabkost@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-13-ehabkost@redhat.com>
Message-Id: <20200831210740.126168-14-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
|
|
object_get_canonical_path_component() returns a malloced copy of a
property name on success, null on failure.
19 of its 25 callers immediately free the returned copy.
Change object_get_canonical_path_component() to return the property
name directly. Since modifying the name would be wrong, adjust the
return type to const char *.
Drop the free from the 19 callers become simpler, add the g_strdup()
to the other six.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200714160202.3121879-4-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
|
|
When all we do with an Error we receive into a local variable is
propagating to somewhere else, we can just as well receive it there
right away. Convert
if (!foo(..., &err)) {
...
error_propagate(errp, err);
...
return ...
}
to
if (!foo(..., errp)) {
...
...
return ...
}
where nothing else needs @err. Coccinelle script:
@rule1 forall@
identifier fun, err, errp, lbl;
expression list args, args2;
binary operator op;
constant c1, c2;
symbol false;
@@
if (
(
- fun(args, &err, args2)
+ fun(args, errp, args2)
|
- !fun(args, &err, args2)
+ !fun(args, errp, args2)
|
- fun(args, &err, args2) op c1
+ fun(args, errp, args2) op c1
)
)
{
... when != err
when != lbl:
when strict
- error_propagate(errp, err);
... when != err
(
return;
|
return c2;
|
return false;
)
}
@rule2 forall@
identifier fun, err, errp, lbl;
expression list args, args2;
expression var;
binary operator op;
constant c1, c2;
symbol false;
@@
- var = fun(args, &err, args2);
+ var = fun(args, errp, args2);
... when != err
if (
(
var
|
!var
|
var op c1
)
)
{
... when != err
when != lbl:
when strict
- error_propagate(errp, err);
... when != err
(
return;
|
return c2;
|
return false;
|
return var;
)
}
@depends on rule1 || rule2@
identifier err;
@@
- Error *err = NULL;
... when != err
Not exactly elegant, I'm afraid.
The "when != lbl:" is necessary to avoid transforming
if (fun(args, &err)) {
goto out
}
...
out:
error_propagate(errp, err);
even though other paths to label out still need the error_propagate().
For an actual example, see sclp_realize().
Without the "when strict", Coccinelle transforms vfio_msix_setup(),
incorrectly. I don't know what exactly "when strict" does, only that
it helps here.
The match of return is narrower than what I want, but I can't figure
out how to express "return where the operand doesn't use @err". For
an example where it's too narrow, see vfio_intx_enable().
Silently fails to convert hw/arm/armsse.c, because Coccinelle gets
confused by ARMSSE being used both as typedef and function-like macro
there. Converted manually.
Line breaks tidied up manually. One nested declaration of @local_err
deleted manually. Preexisting unwanted blank line dropped in
hw/riscv/sifive_e.c.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200707160613.848843-35-armbru@redhat.com>
|
|
Replace
error_setg(&err, ...);
error_propagate(errp, err);
by
error_setg(errp, ...);
Related pattern:
if (...) {
error_setg(&err, ...);
goto out;
}
...
out:
error_propagate(errp, err);
return;
When all paths to label out are that way, replace by
if (...) {
error_setg(errp, ...);
return;
}
and delete the label along with the error_propagate().
When we have at most one other path that actually needs to propagate,
and maybe one at the end that where propagation is unnecessary, e.g.
foo(..., &err);
if (err) {
goto out;
}
...
bar(..., &err);
out:
error_propagate(errp, err);
return;
move the error_propagate() to where it's needed, like
if (...) {
foo(..., &err);
error_propagate(errp, err);
return;
}
...
bar(..., errp);
return;
and transform the error_setg() as above.
In some places, the transformation results in obviously unnecessary
error_propagate(). The next few commits will eliminate them.
Bonus: the elimination of gotos will make later patches in this series
easier to review.
Candidates for conversion tracked down with this Coccinelle script:
@@
identifier err, errp;
expression list args;
@@
- error_setg(&err, args);
+ error_setg(errp, args);
... when != err
error_propagate(errp, err);
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200707160613.848843-34-armbru@redhat.com>
|
|
The previous commit enables conversion of
visit_foo(..., &err);
if (err) {
...
}
to
if (!visit_foo(..., errp)) {
...
}
for visitor functions that now return true / false on success / error.
Coccinelle script:
@@
identifier fun =~ "check_list|input_type_enum|lv_start_struct|lv_type_bool|lv_type_int64|lv_type_str|lv_type_uint64|output_type_enum|parse_type_bool|parse_type_int64|parse_type_null|parse_type_number|parse_type_size|parse_type_str|parse_type_uint64|print_type_bool|print_type_int64|print_type_null|print_type_number|print_type_size|print_type_str|print_type_uint64|qapi_clone_start_alternate|qapi_clone_start_list|qapi_clone_start_struct|qapi_clone_type_bool|qapi_clone_type_int64|qapi_clone_type_null|qapi_clone_type_number|qapi_clone_type_str|qapi_clone_type_uint64|qapi_dealloc_start_list|qapi_dealloc_start_struct|qapi_dealloc_type_anything|qapi_dealloc_type_bool|qapi_dealloc_type_int64|qapi_dealloc_type_null|qapi_dealloc_type_number|qapi_dealloc_type_str|qapi_dealloc_type_uint64|qobject_input_check_list|qobject_input_check_struct|qobject_input_start_alternate|qobject_input_start_list|qobject_input_start_struct|qobject_input_type_any|qobject_input_type_bool|qobject_input_type_bool_keyval|qobject_input_type_int64|qobject_input_type_int64_keyval|qobject_input_type_null|qobject_input_type_number|qobject_input_type_number_keyval|qobject_input_type_size_keyval|qobject_input_type_str|qobject_input_type_str_keyval|qobject_input_type_uint64|qobject_input_type_uint64_keyval|qobject_output_start_list|qobject_output_start_struct|qobject_output_type_any|qobject_output_type_bool|qobject_output_type_int64|qobject_output_type_null|qobject_output_type_number|qobject_output_type_str|qobject_output_type_uint64|start_list|visit_check_list|visit_check_struct|visit_start_alternate|visit_start_list|visit_start_struct|visit_type_.*";
expression list args;
typedef Error;
Error *err;
@@
- fun(args, &err);
- if (err)
+ if (!fun(args, &err))
{
...
}
A few line breaks tidied up manually.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200707160613.848843-19-armbru@redhat.com>
|
|
The only way object_property_add() can fail is when a property with
the same name already exists. Since our property names are all
hardcoded, failure is a programming error, and the appropriate way to
handle it is passing &error_abort.
Same for its variants, except for object_property_add_child(), which
additionally fails when the child already has a parent. Parentage is
also under program control, so this is a programming error, too.
We have a bit over 500 callers. Almost half of them pass
&error_abort, slightly fewer ignore errors, one test case handles
errors, and the remaining few callers pass them to their own callers.
The previous few commits demonstrated once again that ignoring
programming errors is a bad idea.
Of the few ones that pass on errors, several violate the Error API.
The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL. Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call. ich9_pm_add_properties(), sparc32_ledma_realize(),
sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize()
are wrong that way.
When the one appropriate choice of argument is &error_abort, letting
users pick the argument is a bad idea.
Drop parameter @errp and assert the preconditions instead.
There's one exception to "duplicate property name is a programming
error": the way object_property_add() implements the magic (and
undocumented) "automatic arrayification". Don't drop @errp there.
Instead, rename object_property_add() to object_property_try_add(),
and add the obvious wrapper object_property_add().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-15-armbru@redhat.com>
[Two semantic rebase conflicts resolved]
|
|
After consulting Paolo I know why we'd better keep the explicit
aio_poll() in iothread_run(). Document it directly into the code so
that future readers will know the answer from day one.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20190306115532.23025-6-peterx@redhat.com
Message-Id: <20190306115532.23025-6-peterx@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
We were pushing the context until right before running the gmainloop.
Now since we have everything unconditionally, we can move this
earlier.
One benefit is that now it's done even before init_done_sem, so as
long as the iothread user calls iothread_create() and completes, we
know that the thread stack is ready.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-id: 20190306115532.23025-5-peterx@redhat.com
Message-Id: <20190306115532.23025-5-peterx@redhat.com>
[Tweaked comment wording as discussed with Peter Xu.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Since we've have the gcontext always there, create the main loop
altogether. The iothread_run() is even cleaner.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-id: 20190306115532.23025-4-peterx@redhat.com
Message-Id: <20190306115532.23025-4-peterx@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
In existing code we create the gcontext dynamically at the first
access of the gcontext from caller. That can bring some complexity
and potential races during using iothread. Since the context itself
is not that big a resource, and we won't have millions of iothread,
let's simply create the gcontext unconditionally.
This will also be a preparation work further to move the thread
context push operation earlier than before (now it's only pushed right
before we want to start running the gmainloop).
Removing the g_once since it's not necessary, while introducing a new
run_gcontext boolean to show whether we want to run the gcontext.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-id: 20190306115532.23025-3-peterx@redhat.com
Message-Id: <20190306115532.23025-3-peterx@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Only sending an init-done message using lock+cond seems an overkill to
me. Replacing it with a simpler semaphore.
Meanwhile, init the semaphore unconditionally, then we can destroy it
unconditionally too in finalize which seems cleaner.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-id: 20190306115532.23025-2-peterx@redhat.com
Message-Id: <20190306115532.23025-2-peterx@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Lukas reported an hard to reproduce QMP iothread hang on s390 that
QEMU might hang at pthread_join() of the QMP monitor iothread before
quitting:
Thread 1
#0 0x000003ffad10932c in pthread_join
#1 0x0000000109e95750 in qemu_thread_join
at /home/thuth/devel/qemu/util/qemu-thread-posix.c:570
#2 0x0000000109c95a1c in iothread_stop
#3 0x0000000109bb0874 in monitor_cleanup
#4 0x0000000109b55042 in main
While the iothread is still in the main loop:
Thread 4
#0 0x000003ffad0010e4 in ??
#1 0x000003ffad553958 in g_main_context_iterate.isra.19
#2 0x000003ffad553d90 in g_main_loop_run
#3 0x0000000109c9585a in iothread_run
at /home/thuth/devel/qemu/iothread.c:74
#4 0x0000000109e94752 in qemu_thread_start
at /home/thuth/devel/qemu/util/qemu-thread-posix.c:502
#5 0x000003ffad10825a in start_thread
#6 0x000003ffad00dcf2 in thread_start
IMHO it's because there's a race between the main thread and iothread
when stopping the thread in following sequence:
main thread iothread
=========== ==============
aio_poll()
iothread_get_g_main_context
set iothread->worker_context
iothread_stop
schedule iothread_stop_bh
execute iothread_stop_bh [1]
set iothread->running=false
(since main_loop==NULL so
skip to quit main loop.
Note: although main_loop is
NULL but worker_context is
not!)
atomic_read(&iothread->worker_context) [2]
create main_loop object
g_main_loop_run() [3]
pthread_join() [4]
We can see that when execute iothread_stop_bh() at [1] it's possible
that main_loop is still NULL because it's only created until the first
check of the worker_context later at [2]. Then the iothread will hang
in the main loop [3] and it'll starve the main thread too [4].
Here the simple solution should be that we check again the "running"
variable before check against worker_context.
CC: Thomas Huth <thuth@redhat.com>
CC: Dr. David Alan Gilbert <dgilbert@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Lukáš Doktor <ldoktor@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
CC: Eric Blake <eblake@redhat.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
Reported-by: Lukáš Doktor <ldoktor@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-id: 20190129051432.22023-1-peterx@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
-object iothread,id=foo,? will crash qemu:
qemu-system-x86_64:qemu-thread-posix.c:128: qemu_cond_destroy: Assertion `cond->initialized' failed.
Use thread_id != -1 to check if iothread_complete() finished
successfully and the mutex/cond have been initialized.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180821100716.13803-1-marcandre.lureau@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
|
|
Free the AIO context earlier than the GMainContext (if we have) to
workaround a glib2 bug that GSource context pointer is not cleared even
if the context has already been destroyed (while it should).
The patch itself only changed the order to destroy the objects, no
functional change at all. Without this workaround, we can encounter
qmp-test hang with oob (and possibly any other use case when iothread is
used with GMainContexts):
#0 0x00007f35ffe45334 in __lll_lock_wait () from /lib64/libpthread.so.0
#1 0x00007f35ffe405d8 in _L_lock_854 () from /lib64/libpthread.so.0
#2 0x00007f35ffe404a7 in pthread_mutex_lock () from /lib64/libpthread.so.0
#3 0x00007f35fc5b9c9d in g_source_unref_internal (source=0x24f0600, context=0x7f35f0000960, have_lock=0) at gmain.c:1685
#4 0x0000000000aa6672 in aio_context_unref (ctx=0x24f0600) at /root/qemu/util/async.c:497
#5 0x000000000065851c in iothread_instance_finalize (obj=0x24f0380) at /root/qemu/iothread.c:129
#6 0x0000000000962d79 in object_deinit (obj=0x24f0380, type=0x242e960) at /root/qemu/qom/object.c:462
#7 0x0000000000962e0d in object_finalize (data=0x24f0380) at /root/qemu/qom/object.c:476
#8 0x0000000000964146 in object_unref (obj=0x24f0380) at /root/qemu/qom/object.c:924
#9 0x0000000000965880 in object_finalize_child_property (obj=0x24ec640, name=0x24efca0 "mon_iothread", opaque=0x24f0380) at /root/qemu/qom/object.c:1436
#10 0x0000000000962c33 in object_property_del_child (obj=0x24ec640, child=0x24f0380, errp=0x0) at /root/qemu/qom/object.c:436
#11 0x0000000000962d26 in object_unparent (obj=0x24f0380) at /root/qemu/qom/object.c:455
#12 0x0000000000658f00 in iothread_destroy (iothread=0x24f0380) at /root/qemu/iothread.c:365
#13 0x00000000004c67a8 in monitor_cleanup () at /root/qemu/monitor.c:4663
#14 0x0000000000669e27 in main (argc=16, argv=0x7ffc8b1ae2f8, envp=0x7ffc8b1ae380) at /root/qemu/vl.c:4749
The glib2 bug is fixed in commit 26056558b ("gmain: allow
g_source_get_context() on destroyed sources", 2012-07-30), so the first
good version is glib2 2.33.10. But we still support building with
glib as old as 2.28, so we need the workaround.
Let's make sure we destroy the GSources first before its owner context
until we drop support for glib older than 2.33.10.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180409083956.1780-1-peterx@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
|
|
OOB can enable iothread for parsing even on Windows. We need some tunes
to enable that on Windows otherwise it'll break Windows users. This
patch fixes the breakage on Windows with qemu-system-ppc.exe.
Reported-by: Howard Spoelstra <hsp.cat7@gmail.com>
Tested-by: Howard Spoelstra <hsp.cat7@gmail.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180322085630.23654-1-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Commit 00d09fdbbae5f7864ce754913efc84c12fdf9f1a ("vl: pause vcpus before
stopping iothreads") and commit dce8921b2baaf95974af8176406881872067adfa
("iothread: Stop threads before main() quits") tried to work around the
fact that emulation was still active during termination by stopping
iothreads. They suffer from race conditions:
1. virtio_scsi_handle_cmd_vq() racing with iothread_stop_all() hits the
virtio_scsi_ctx_check() assertion failure because the BDS AioContext
has been modified by iothread_stop_all().
2. Guest vq kick racing with main loop termination leaves a readable
ioeventfd that is handled by the next aio_poll() when external
clients are enabled again, resulting in unwanted emulation activity.
This patch obsoletes those commits by fully disabling emulation activity
when vcpus are stopped.
Use the new vm_shutdown() function instead of pause_all_vcpus() so that
vm change state handlers are invoked too. Virtio devices will now stop
their ioeventfds, preventing further emulation activity after vm_stop().
Note that vm_stop(RUN_STATE_SHUTDOWN) cannot be used because it emits a
QMP STOP event that may affect existing clients.
It is no longer necessary to call replay_disable_events() directly since
vm_shutdown() does so already.
Drop iothread_stop_all() since it is no longer used.
Cc: Fam Zheng <famz@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20180307144205.20619-5-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
The previous commit improved compile time by including less of the
generated QAPI headers. This is impossible for stuff defined directly
in qapi-schema.json, because that ends up in headers that that pull in
everything.
Move everything but include directives from qapi-schema.json to new
sub-module qapi/misc.json, then include just the "misc" shard where
possible.
It's possible everywhere, except:
* monitor.c needs qmp-command.h to get qmp_init_marshal()
* monitor.c, ui/vnc.c and the generated qapi-event-FOO.c need
qapi-event.h to get enum QAPIEvent
Perhaps we'll get rid of those some other day.
Adding a type to qapi/migration.json now recompiles some 120 instead
of 2300 out of 5100 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-25-armbru@redhat.com>
[eblake: rebase to master]
Signed-off-by: Eric Blake <eblake@redhat.com>
|
|
This cleanup makes the number of objects depending on qapi/error.h
drop from 1910 (out of 4743) to 1612 in my "build everything" tree.
While there, separate #include from file comment with a blank line,
and drop a useless comment on why qemu/osdep.h is included first.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-5-armbru@redhat.com>
[Semantic conflict with commit 34e304e975 resolved, OSX breakage fixed]
|
|
There is a small chance that iothread_stop() hangs as follows:
Thread 3 (Thread 0x7f63eba5f700 (LWP 16105)):
#0 0x00007f64012c09b6 in ppoll () at /lib64/libc.so.6
#1 0x000055959992eac9 in ppoll (__ss=0x0, __timeout=0x0, __nfds=<optimized out>, __fds=<optimized out>) at /usr/include/bits/poll2.h:77
#2 0x000055959992eac9 in qemu_poll_ns (fds=<optimized out>, nfds=<optimized out>, timeout=<optimized out>) at util/qemu-timer.c:322
#3 0x0000559599930711 in aio_poll (ctx=0x55959bdb83c0, blocking=blocking@entry=true) at util/aio-posix.c:629
#4 0x00005595996806fe in iothread_run (opaque=0x55959bd78400) at iothread.c:59
#5 0x00007f640159f609 in start_thread () at /lib64/libpthread.so.0
#6 0x00007f64012cce6f in clone () at /lib64/libc.so.6
Thread 1 (Thread 0x7f640b45b280 (LWP 16103)):
#0 0x00007f64015a0b6d in pthread_join () at /lib64/libpthread.so.0
#1 0x00005595999332ef in qemu_thread_join (thread=<optimized out>) at util/qemu-thread-posix.c:547
#2 0x00005595996808ae in iothread_stop (iothread=<optimized out>) at iothread.c:91
#3 0x000055959968094d in iothread_stop_iter (object=<optimized out>, opaque=<optimized out>) at iothread.c:102
#4 0x0000559599857d97 in do_object_child_foreach (obj=obj@entry=0x55959bdb8100, fn=fn@entry=0x559599680930 <iothread_stop_iter>, opaque=opaque@entry=0x0, recurse=recurse@entry=false) at qom/object.c:852
#5 0x0000559599859477 in object_child_foreach (obj=obj@entry=0x55959bdb8100, fn=fn@entry=0x559599680930 <iothread_stop_iter>, opaque=opaque@entry=0x0) at qom/object.c:867
#6 0x0000559599680a6e in iothread_stop_all () at iothread.c:341
#7 0x000055959955b1d5 in main (argc=<optimized out>, argv=<optimized out>, envp=<optimized out>) at vl.c:4913
The relevant code from iothread_run() is:
while (!atomic_read(&iothread->stopping)) {
aio_poll(iothread->ctx, true);
and iothread_stop():
iothread->stopping = true;
aio_notify(iothread->ctx);
...
qemu_thread_join(&iothread->thread);
The following scenario can occur:
1. IOThread:
while (!atomic_read(&iothread->stopping)) -> stopping=false
2. Main loop:
iothread->stopping = true;
aio_notify(iothread->ctx);
3. IOThread:
aio_poll(iothread->ctx, true); -> hang
The bug is explained by the AioContext->notify_me doc comments:
"If this field is 0, everything (file descriptors, bottom halves,
timers) will be re-evaluated before the next blocking poll(), thus the
event_notifier_set call can be skipped."
The problem is that "everything" does not include checking
iothread->stopping. This means iothread_run() will block in aio_poll()
if aio_notify() was called just before aio_poll().
This patch fixes the hang by replacing aio_notify() with
aio_bh_schedule_oneshot(). This makes aio_poll() or g_main_loop_run()
to return.
Implementing this properly required a new bool running flag. The new
flag prevents races that are tricky if we try to use iothread->stopping.
Now iothread->stopping is purely for iothread_stop() and
iothread->running is purely for the iothread_run() thread.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20171207201320.19284-6-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Encapsulate IOThread QOM object lookup so that callers don't need to
know how and where IOThread objects live.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20171206144550.22295-8-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
When gcontext is used with iothread, the context will be destroyed
during iothread_stop(). That's not good since sometimes we would like
to keep the resources until iothread is destroyed, but we may want to
stop the thread before that point.
Delay the destruction of gcontext to iothread finalize. Then we can do:
iothread_stop(thread);
some_cleanup_on_resources();
iothread_destroy(thread);
We may need this patch if we want to run chardev IOs in iothreads and
hopefully clean them up correctly. For more specific information,
please see 2b316774f6 ("qemu-char: do not operate on sources from
finalize callbacks").
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-id: 20170928025958.1420-5-peterx@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
So that internal iothread users can explicitly stop one iothread without
destroying it.
Since at it, fix iothread_stop() to allow it to be called multiple
times. Before this patch we may call iothread_stop() more than once on
single iothread, while that may not be correct since qemu_thread_join()
is not allowed to run twice. From manual of pthread_join():
Joining with a thread that has previously been joined results in
undefined behavior.
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-id: 20170928025958.1420-4-peterx@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
IOThread is a general framework that contains IO loop environment and a
real thread behind. It's also good to be used internally inside qemu.
Provide some helpers for it to create iothreads to be used internally.
Put all the internal used iothreads into the internal object container.
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-id: 20170928025958.1420-3-peterx@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Currently, iothread_stop_all() makes all iothread objects unsafe
to be destroyed, because qemu_thread_join() ends up being called
twice.
To fix this, make iothread_stop() idempotent by checking
thread->stopped.
Fixes the following crash:
qemu-system-x86_64 -object iothread,id=iothread0 -monitor stdio -display none
QEMU 2.10.50 monitor - type 'help' for more information
(qemu) quit
qemu: qemu_thread_join: No such process
Aborted (core dumped)
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170926130028.12471-1-ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
IOThread uses AioContext event loop and does not run a GMainContext.
Therefore,chardev cannot work in IOThread,such as the chardev is
used for colo-compare packets reception.
This patch makes the IOThread run the GMainContext event loop,
chardev and IOThread can work together.
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Wang Yong <wang.yong155@zte.com.cn>
Signed-off-by: Wang Guang <wang.guang55@zte.com.cn>
Signed-off-by: Jason Wang <jasowang@redhat.com>
|
|
IOthreads were recently extended by new properties that can
enable/disable and configure aio polling. This will also allow
other tools that uses QEMU to probe for existence of those new
properties via query-qmp-schema.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Message-Id: <3163c16d6ab4257f7be9ad44fe9cc0ce8c359e5a.1486718555.git.phrdina@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
IOThread AioContexts are likely to consist only of event sources like
virtqueue ioeventfds and LinuxAIO completion eventfds that are pollable
from userspace (without system calls).
We recently merged the AioContext polling feature but didn't enable it
by default yet. I have gone back over the performance data on the
mailing list and picked a default polling value that gave good results.
Let's enable AioContext polling by default so users don't have another
switch they need to set manually. If performance regressions are found
we can still disable this for the QEMU 2.9 release.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Karl Rister <krister@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170126170119.27876-1-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
These parameters control the poll time self-tuning algorithm. They are
optional and will default to sane values if omitted.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20161201192652.9509-14-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
This patch is based on the algorithm for the kvm.ko halt_poll_ns
parameter in Linux. The initial polling time is zero.
If the event loop is woken up within the maximum polling time it means
polling could be effective, so grow polling time.
If the event loop is woken up beyond the maximum polling time it means
polling is not effective, so shrink polling time.
If the event loop makes progress within the current polling time then
the sweet spot has been reached.
This algorithm adjusts the polling time so it can adapt to variations in
workloads. The goal is to reach the sweet spot while also recognizing
when polling would hurt more than help.
Two new trace events, poll_grow and poll_shrink, are added for observing
polling time adjustment.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20161201192652.9509-13-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Poll mode can be configured with -object iothread,poll-max-ns=NUM.
Polling is disabled with a value of 0 nanoseconds.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20161201192652.9509-7-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
This is the first step towards having fine-grained critical sections in
dataplane threads, which will resolve lock ordering problems between
address_space_* functions (which need the BQL when doing MMIO, even
after we complete RCU-based dispatch) and the AioContext.
Because AioContext does not use contention callbacks anymore, the
unit test has to be changed.
Previously applied as a0710f7995f914e3044e5899bd8ff6c43c62f916 and
then reverted.
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1477565348-5458-19-git-send-email-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
|
|
Soon bdrv_drain will not call aio_poll itself on iothreads. If block
devices are left hanging off the iothread's AioContext, there will be no
one to do I/O for those poor devices.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-Id: <1477565348-5458-13-git-send-email-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
|
|
This will be used by BDRV_POLL_WHILE (and thus by bdrv_drain)
to choose how to wait for I/O completion.
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1477565348-5458-12-git-send-email-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
|
|
if iothread->ctx is set to NULL, aio_context_unref triggers the assertion:
g_source_unref: assertion 'source != NULL' failed.
The patch fixes it.
Signed-off-by: Lin Ma <lma@suse.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20160926052958.10716-1-lma@suse.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Right after main_loop ends, we release various things but keep iothread
alive. The latter is not prepared to the sudden change of resources.
Specifically, after bdrv_close_all(), virtio-scsi dataplane get a
surprise at the empty BlockBackend:
(gdb) bt
at /usr/src/debug/qemu-2.6.0/hw/scsi/virtio-scsi.c:543
at /usr/src/debug/qemu-2.6.0/hw/scsi/virtio-scsi.c:577
It is because the d->conf.blk->root is set to NULL, then
blk_get_aio_context() returns qemu_aio_context, whereas s->ctx is still
pointing to the iothread:
hw/scsi/virtio-scsi.c:543:
if (s->dataplane_started) {
assert(blk_get_aio_context(d->conf.blk) == s->ctx);
}
To fix this, let's stop iothreads before doing bdrv_close_all().
Cc: qemu-stable@nongnu.org
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1473326931-9699-1-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1454089805-5470-16-git-send-email-peter.maydell@linaro.org
|
|
This makes it easier to find the desired thread. Use "IO" plus the id;
even with the 14 character limit on the thread name, enough of the id should
be readable (e.g. "IO iothreadNNN" with three characters for the number).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 1448372804-5034-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Otherwise, grace periods are detected too early!
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add object_get_objects_root() function which is a convenience for
obtaining the Object * located at /objects in the object
composition tree. Convert existing code over to use the new
API where appropriate.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
This reverts commit a0710f7995f914e3044e5899bd8ff6c43c62f916.
In qemu-devel email message <556DBF87.2020908@de.ibm.com>, Christian
Borntraeger writes:
Having many guests all with a kernel/ramdisk (via -kernel) and
several null block devices will result in hangs. All hanging
guests are in partition detection code waiting for an I/O to return
so very early maybe even the first I/O.
Reverting that commit "fixes" the hangs.
Reverting this commit for the 2.4 release. More time is needed to
investigate and correct this patch.
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
The functions tpm_backend_thread_tpm_reset() and iothread_find()
are completely unused, let's remove them.
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
This is the first step towards having fine-grained critical sections in
dataplane threads, which resolves lock ordering problems between
address_space_* functions (which need the BQL when doing MMIO, even
after we complete RCU-based dispatch) and the AioContext.
Because AioContext does not use contention callbacks anymore, the
unit test has to be changed.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1424449612-18215-4-git-send-email-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
On a system with a low limit of open files the initialization
of the event notifier could fail and QEMU exits without printing any
error information to the user.
The problem can be easily reproduced by enforcing a low limit of open
files and start QEMU with enough I/O threads to hit this limit.
The same problem raises, without the creation of I/O threads, while
QEMU initializes the main event loop by enforcing an even lower limit of
open files.
This commit adds an error message on failure:
# qemu [...] -object iothread,id=iothread0 -object iothread,id=iothread1
qemu: Failed to initialize event notifier: Too many open files in system
Signed-off-by: Chrysostomos Nanakos <cnanakos@grnet.gr>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Currently, whenever aio_poll(ctx, true) has completed all pending
work it returns true *and* the next call to aio_poll(ctx, true)
will not block.
This invariant has its roots in qemu_aio_flush()'s implementation
as "while (qemu_aio_wait()) {}". However, qemu_aio_flush() does
not exist anymore and bdrv_drain_all() is implemented differently;
and this invariant is complicated to maintain and subtly different
from the return value of GMainLoop's g_main_context_iteration.
All calls to aio_poll(ctx, true) except one are guarded by a
while() loop checking for a request to be incomplete, or a
BlockDriverState to be idle. The one remaining call (in
iothread.c) uses this to delay the aio_context_release/acquire
pair until the AioContext is quiescent, however:
- we can do the same just by using non-blocking aio_poll,
similar to how vl.c invokes main_loop_wait
- it is buggy, because it does not ensure that the AioContext
is released between an aio_notify and the next time the
iothread goes to sleep. This leads to hangs when stopping
the dataplane thread.
In the end, these semantics are a bad match for the current
users of AioContext. So modify that one exception in iothread.c,
which also fixes the hangs, as well as the testcase so that
it use the same idiom as the actual QEMU code.
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|