aboutsummaryrefslogtreecommitdiff
path: root/io
AgeCommit message (Collapse)Author
2017-09-06io: Add new qio_channel_read{, v}_all_eof functionsEric Blake
Some callers want to distinguish between clean EOF (no bytes read) vs. a short read (at least one byte read, but EOF encountered before reaching the desired length), as it allows clients the ability to do a graceful shutdown when a server shuts down at defined safe points in the protocol, rather than treating all shutdown scenarios as an error due to EOF. However, we don't want to require all callers to have to check for early EOF. So add another wrapper function that can be used by the callers that care about the distinction. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20170905191114.5959-3-eblake@redhat.com> Acked-by: Daniel P. Berrange <berrange@redhat.com>
2017-09-06io: Yield rather than wait when already in coroutineEric Blake
The new qio_channel_{read,write}{,v}_all functions are documented as yielding until data is available. When used on a blocking channel, this yield is done via qio_channel_wait() which spawns a nested event loop under the hood (so it is that secondary loop which yields as needed); but if we are already in a coroutine (at which point QIO_CHANNEL_ERR_BLOCK is only possible if we are a non-blocking channel), we want to yield the current coroutine instead of spawning a nested event loop. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20170905191114.5959-2-eblake@redhat.com> Acked-by: Daniel P. Berrange <berrange@redhat.com> [commit message updated] Signed-off-by: Eric Blake <eblake@redhat.com>
2017-09-05io: add new qio_channel_{readv, writev, read, write}_all functionsDaniel P. Berrange
These functions wait until they are able to read / write the full requested data buffer(s). Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2017-09-05util: remove the obsolete non-blocking connectCao jin
The non-blocking connect mechanism is obsolete, and it doesn't work well in inet connection, because it will call getaddrinfo first and getaddrinfo will blocks on DNS lookups. Since commit e65c67e4 & d984464e, the non-blocking connect of migration goes through QIOChannel in a different manner(using a thread), and nobody use this old non-blocking connect anymore. Any newly written code which needs a non-blocking connect should use the QIOChannel code, so we can drop NonBlockingConnectHandler as a concept entirely. Suggested-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com> Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2017-08-02io: fix qio_channel_socket_accept err handlingPeter Xu
When accept failed, we should setup errp with the reason. More importantly, the caller may assume errp be non-NULL when error happens, and not setting the errp may crash QEMU. At the same time, move the trace_qio_channel_socket_accept_fail() after the if check on EINTR. Two reasons: 1. when EINTR happened, it's not really a fault (we should just try again), so we should not log with an "accept failure". 2. trace_*() functions may overwrite errno, then the old errno will be missing. We need to either check errno before trace_*() calls, or reserve the errno. Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <1501666880-10159-3-git-send-email-peterx@redhat.com> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-07-31docs: fix broken paths to docs/devel/tracing.txtPhilippe Mathieu-Daudé
With the move of some docs/ to docs/devel/ on ac06724a71, no references were updated. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-07-19Merge remote-tracking branch 'remotes/berrange/tags/pull-qio-2017-07-18-1' ↵Peter Maydell
into staging Merge I/O 2017/07/18 v1 # gpg: Signature made Tue 18 Jul 2017 11:31:53 BST # gpg: using RSA key 0xBE86EBB415104FDF # gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" # gpg: aka "Daniel P. Berrange <berrange@redhat.com>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF * remotes/berrange/tags/pull-qio-2017-07-18-1: io: simplify qio_channel_attach_aio_context Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-07-14io: preserve ipv4/ipv6 flags when resolving InetSocketAddressDaniel P. Berrange
The original InetSocketAddress struct may have has_ipv4 and has_ipv6 fields set, which will control both the ai_family used during DNS resolution, and later use of the V6ONLY flag. Currently the standalone DNS resolver code drops the has_ipv4 & has_ipv6 flags after resolving, which means the later bind() code won't correctly set V6ONLY. This fixes the following scenarios -vnc :0,ipv4=off -vnc :0,ipv6=on -vnc :::0,ipv4=off -vnc :::0,ipv6=on which all mistakenly accepted IPv4 clients Acked-by: Gerd Hoffmann <kraxel@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2017-07-13websock: Don't try to set *errp directlyEduardo Habkost
Assigning directly to *errp is not valid, as errp may be NULL, &error_fatal, or &error_abort. Use error_propagate() instead. Cc: "Daniel P. Berrange" <berrange@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20170608133906.12737-4-ehabkost@redhat.com> Reviewed-by: Manos Pitsidianakis <el13635@mail.ntua.gr> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-05-26io: simplify qio_channel_attach_aio_contextPaolo Bonzini
If properly preceded by qio_channel_detach_aio_context, this function really has nothing to do except setting ioc->ctx. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2017-05-09sockets: Limit SocketAddressLegacy to external interfacesMarkus Armbruster
SocketAddressLegacy is a simple union, and simple unions are awkward: they have their variant members wrapped in a "data" object on the wire, and require additional indirections in C. SocketAddress is the equivalent flat union. Convert all users of SocketAddressLegacy to SocketAddress, except for existing external interfaces. See also commit fce5d53..9445673 and 85a82e8..c5f1ae3. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1493192202-3184-7-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [Minor editing accident fixed, commit message and a comment tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-05-09sockets: Rename SocketAddress to SocketAddressLegacyMarkus Armbruster
The next commit will rename SocketAddressFlat to SocketAddress, and the commit after that will replace most uses of SocketAddressLegacy by SocketAddress, replacing most of this commit's renames right back. Note that checkpatch emits a few "line over 80 characters" warnings. The long lines are all temporary; the SocketAddressLegacy replacement will shorten them again. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1493192202-3184-5-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-04-24socket: Make errp the last parameter of socket_connectFam Zheng
Signed-off-by: Fam Zheng <famz@redhat.com> Message-Id: <20170421122710.15373-2-famz@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-04-04io: fix FD socket handling in DNS lookupDaniel P. Berrange
The qio_dns_resolver_lookup_sync() method is required to be a no-op for socket kinds that don't require name resolution. Thus the KIND_FD handling should not return an error. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2017-04-04io: fix incoming client socket initializationWang guang
The channel socket was initialized manually, but forgot to set QIO_CHANNEL_FEATURE_SHUTDOWN. Thus, the colo_process_incoming_thread would hang at recvmsg. This patch just call qio_channel_socket_new to get channel, Which set QIO_CHANNEL_FEATURE_SHUTDOWN already. Signed-off-by: Wang Guang<wang.guang55@zte.com.cn> Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2017-04-03io vnc sockets: Clean up SocketAddressKind switchesMarkus Armbruster
We have quite a few switches over SocketAddressKind. Some have case labels for all enumeration values, others rely on a default label. Some abort when the value isn't a valid SocketAddressKind, others report an error then. Unify as follows. Always provide case labels for all enumeration values, to clarify intent. Abort when the value isn't a valid SocketAddressKind, because the program state is messed up then. Improve a few error messages while there. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 1490895797-29094-4-git-send-email-armbru@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-02-28io: fully parse & validate HTTP headers for websocket protocol handshakeDaniel P. Berrange
The current websockets protocol handshake code is very relaxed, just doing crude string searching across the HTTP header data. This causes it to both reject valid connections and fail to reject invalid connections. For example, according to the RFC 6455 it: - MUST reject any method other than "GET" - MUST reject any HTTP version less than "HTTP/1.1" - MUST reject Connection header without "Upgrade" listed - MUST reject Upgrade header which is not 'websocket' - MUST reject missing Host header - MUST treat HTTP header names as case insensitive To do all this validation correctly requires that we fully parse the HTTP headers, populating a data structure containing the header fields. After this change, we also reject any path other than '/' Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2017-02-28io: fix decoding when multiple websockets frames arrive at onceDaniel P. Berrange
The qio_channel_websock_read_wire() method will read upto 4096 bytes off the socket and then decode the websockets header and payload. The code was only decoding a single websockets frame, even if the buffered data contained multiple frames. This meant that decoding of subsequent frames was delayed until further input arrived on the socket. This backlog of delayed frames gets worse & worse over time. Symptom was that when connecting to the VNC server via the built-in websockets server, mouse/keyboard interaction would start out fine, but slowly get more & more delayed until it was unusable. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2017-02-21io: make qio_channel_yield aware of AioContextsPaolo Bonzini
Support separate coroutines for reading and writing, and place the read/write handlers on the AioContext that the QIOChannel is registered with. Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Message-id: 20170213135235.12274-7-pbonzini@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-02-21io: add methods to set I/O handlers on AioContextPaolo Bonzini
This is in preparation for making qio_channel_yield work on AioContexts other than the main one. Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Message-id: 20170213135235.12274-6-pbonzini@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-01-26io: fix possible double free of task error objectDaniel P. Berrange
If a QIOTask has an error set and the calling code uses qio_task_propagate_error() to steal the reference to that Error object, the task would not clear its own reference. This would lead to a double-free when qio_task_free runs, if the caller had (correctly) freed the Error object they now owned. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2017-01-23io: introduce a DNS resolver APIDaniel P. Berrange
Currently DNS resolution is done automatically as part of the creation of a QIOChannelSocket object instance. This works ok for network clients where you just end up a single network socket, but for servers, the results of DNS resolution may require creation of multiple sockets. Introducing a DNS resolver API allows DNS resolution to be separated from the socket object creation. This will make it practical to create multiple QIOChannelSocket instances for servers. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2017-01-23io: remove Error parameter from QIOTask thread workerDaniel P. Berrange
Now that task objects have a directly associated error, there's no need for an an Error **errp parameter to the QIOTask thread worker function. It already has a QIOTask object, so can directly set the error on it. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2017-01-23io: change the QIOTask callback signatureDaniel P. Berrange
Currently the QIOTaskFunc signature takes an Object * for the source, and an Error * for any error. We also need to be able to provide a result pointer. Rather than continue to add parameters to QIOTaskFunc, remove the existing ones and simply pass the QIOTask object instead. This has methods to access all the other data items required in the callback impl. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2017-01-23io: add ability to associate an error with a taskDaniel P. Berrange
Currently when a task fails, the error is never explicitly associated with the task object, it is just passed along through the completion callback. This adds the ability to explicitly associate an error with the task. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2017-01-23io: add ability to associate an opaque "result" with with a taskDaniel P. Berrange
Currently there is no data associated with a successful task completion. This adds an opaque pointer to the task to store an arbitrary result. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2017-01-23io: stop incrementing reference in qio_task_get_sourceDaniel P. Berrange
Incrementing the reference in qio_task_get_source is not necessary, since we're not running concurrently with any other code touching the QIOTask. This minimizes chances of further memory leaks. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-10-27io: add ability to set a name for IO channelsDaniel P. Berrange
The GSource object has ability to have a name, which is useful when debugging performance problems with the mainloop event callbacks that take too long. By associating a name with a QIOChannel object, we can then set the name on any GSource associated with the channel. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-10-27io: set LISTEN flag explicitly for listen socketsDaniel P. Berrange
The SO_ACCEPTCONN ioctl is not portable across OS, with some BSD versions and OS-X not supporting it. There is no viable alternative to this, so instead just set the feature explicitly when creating a listener socket. The current users of qio_channel_socket_new_fd() won't ever be given a listening socket, so there's no problem with no auto-detecting it in this scenario Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-10-26io: Introduce a qio_channel_set_feature() helperFelipe Franciosi
Testing QIOChannel feature support can be done with a helper called qio_channel_has_feature(). Setting feature support, however, was done manually with a logical OR. This patch introduces a new helper called qio_channel_set_feature() and makes use of it where applicable. Signed-off-by: Felipe Franciosi <felipe@nutanix.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-10-26io: Use qio_channel_has_feature() where applicableFelipe Franciosi
Parts of the code have been testing QIOChannel features directly with a logical AND. This patch makes it all consistent by using the qio_channel_has_feature() function to test if a feature is present. Signed-off-by: Felipe Franciosi <felipe@nutanix.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-10-26io: Fix double shift usages on QIOChannel featuresFelipe Franciosi
When QIOChannels were introduced in 666a3af9, the feature bits were already defined shifted. However, when using them, the code was shifting them again. The incorrect use was consistent until 74b6ce43, where QIO_CHANNEL_FEATURE_LISTEN was defined shifted but tested unshifted. This patch changes the definition to be unshifted and fixes the incorrect usage introduced on 74b6ce43. Signed-off-by: Felipe Franciosi <felipe@nutanix.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-09-28trace: move util/buffer.c trace points into correct fileDaniel P. Berrange
The trace points for util/buffer.c were mistakenly put in the io/trace-events file, instead of util/trace-events in commit 892bd32ea38bbe9709ff0b6db3053bdf06eec9fb Author: Daniel P. Berrange <berrange@redhat.com> Date: Thu Jun 16 09:39:50 2016 +0100 trace: split out trace events for io/ directory Move all trace-events for files in the io/ directory to Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1473872624-23285-2-git-send-email-berrange@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-08-12trace-events: fix first line comment in trace-eventsLaurent Vivier
Documentation is docs/tracing.txt instead of docs/trace-events.txt. find . -name trace-events -exec \ sed -i "s?See docs/trace-events.txt for syntax documentation.?See docs/tracing.txt for syntax documentation.?" \ {} \; Signed-off-by: Laurent Vivier <lvivier@redhat.com> Message-id: 1470669081-17860-1-git-send-email-lvivier@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-08-03io: remove mistaken call to object_ref on QTaskDaniel P. Berrange
The QTask struct is just a standalone struct, not a QOM Object, so calling object_ref() on it is not appropriate. This results in mangling the 'destroy' field in the QTask struct, causing the later call to qtask_free() to try to call the function at address 0x1, with predictably segfault happy results. There is in fact no need for ref counting with QTask, as the call to qtask_abort() or qtask_complete() will automatically free associated memory. This fixes the crash shown in https://bugs.launchpad.net/qemu/+bug/1589923 Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-07-13coroutine: move entry argument to qemu_coroutine_createPaolo Bonzini
In practice the entry argument is always known at creation time, and it is confusing that sometimes qemu_coroutine_enter is used with a non-NULL argument to re-enter a coroutine (this happens in block/sheepdog.c and tests/test-coroutine.c). So pass the opaque value at creation time, for consistency with e.g. aio_bh_new. Mostly done with the following semantic patch: @ entry1 @ expression entry, arg, co; @@ - co = qemu_coroutine_create(entry); + co = qemu_coroutine_create(entry, arg); ... - qemu_coroutine_enter(co, arg); + qemu_coroutine_enter(co); @ entry2 @ expression entry, arg; identifier co; @@ - Coroutine *co = qemu_coroutine_create(entry); + Coroutine *co = qemu_coroutine_create(entry, arg); ... - qemu_coroutine_enter(co, arg); + qemu_coroutine_enter(co); @ entry3 @ expression entry, arg; @@ - qemu_coroutine_enter(qemu_coroutine_create(entry), arg); + qemu_coroutine_enter(qemu_coroutine_create(entry, arg)); @ reentry @ expression co; @@ - qemu_coroutine_enter(co, NULL); + qemu_coroutine_enter(co); except for the aforementioned few places where the semantic patch stumbled (as expected) and for test_co_queue, which would otherwise produce an uninitialized variable warning. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-07-06sockets: Use new QAPI cloningEric Blake
Rather than rolling our own clone via an expensive conversion in and back out of QObject, use the new clone visitor. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1465490926-28625-15-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-06-29socket: unlink unix socket on removeMarc-André Lureau
qemu leaves unix socket files behind when removing a listening chardev or leaving. qemu could clean that up, even if doing so isn't race-free. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1347077 Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1466105332-10285-4-git-send-email-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-29socket: add listen featureMarc-André Lureau
Add a flag to tell whether the channel socket is listening. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1466105332-10285-3-git-send-email-marcandre.lureau@redhat.com> Acked-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2016-06-20trace: split out trace events for io/ directoryDaniel P. Berrange
Move all trace-events for files in the io/ directory to their own file. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1466066426-16657-5-git-send-email-berrange@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-05-26io: avoid double-free when closing QIOChannelBufferDaniel P. Berrange
The QIOChannelBuffer's close implementation will free the internal data buffer. It failed to reset the pointer to NULL though, so when the object is later finalized it will free it a second time with predictable crash. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <1461751518-12128-3-git-send-email-berrange@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-05-19qemu-common: stop including qemu/bswap.h from qemu-common.hPaolo Bonzini
Move it to the actual users. There are still a few includes of qemu/bswap.h in headers; removing them is left for future work. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22include/qemu/osdep.h: Don't include qapi/error.hMarkus Armbruster
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the Error typedef. Since then, we've moved to include qemu/osdep.h everywhere. Its file comment explains: "To avoid getting into possible circular include dependencies, this file should not include any other QEMU headers, with the exceptions of config-host.h, compiler.h, os-posix.h and os-win32.h, all of which are doing a similar job to this file and are under similar constraints." qapi/error.h doesn't do a similar job, and it doesn't adhere to similar constraints: it includes qapi-types.h. That's in excess of 100KiB of crap most .c files don't actually need. Add the typedef to qemu/typedefs.h, and include that instead of qapi/error.h. Include qapi/error.h in .c files that need it and don't get it now. Include qapi-types.h in qom/object.h for uint16List. Update scripts/clean-includes accordingly. Update it further to match reality: replace config.h by config-target.h, add sysemu/os-posix.h, sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h comment quoted above similarly. This reduces the number of objects depending on qapi/error.h from "all of them" to less than a third. Unfortunately, the number depending on qapi-types.h shrinks only a little. More work is needed for that one. Signed-off-by: Markus Armbruster <armbru@redhat.com> [Fix compilation without the spice devel packages. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-10osdep: remove use of socket_error() from all codeDaniel P. Berrange
Now that QEMU wraps the Win32 sockets methods to automatically set errno upon failure, there is no reason for callers to use the socket_error() method. They can rely on accessing errno even on Win32. Remove all use of socket_error() from general code, leaving it as a static method in oslib-win32.c only. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-03-10io: implement socket watch for win32 using WSAEventSelect+selectPaolo Bonzini
On Win32 we cannot directly poll on socket handles. Instead we create a Win32 event object and associate the socket handle with the event. When the event signals readyness we then have to use select to determine which events are ready. Creating Win32 events is moderately heavyweight, so we don't want todo it every time we create a GSource, so this associates a single event with a QIOChannel. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-03-10io: remove checking of EWOULDBLOCKDaniel P. Berrange
Since we now canonicalize WSAEWOULDBLOCK into EAGAIN there is no longer any need to explicitly check EWOULDBLOCK for Win32. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-03-10io: use qemu_accept to ensure SOCK_CLOEXEC is setDaniel P. Berrange
The QIOChannelSocket code mistakenly uses the bare accept() function which does not set SOCK_CLOEXEC. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-03-10io: introduce qio_channel_create_socket_watchPaolo Bonzini
Sockets are not in the same namespace as file descriptors on Windows. As an initial step, introduce separate APIs for file descriptor and socket watches. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-10io: pass HANDLE to g_source_add_poll on Win32Paolo Bonzini
Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-10io: fix copy+paste mistake in socket error messageDaniel P. Berrange
s/write/read/ in the error message reported after readmsg() fails Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-15 06:05:18 +0000