Age | Commit message (Collapse) | Author |
|
The GDateTime APIs provided by GLib avoid portability pitfalls, such
as some platforms where 'struct timeval.tv_sec' field is still 'long'
instead of 'time_t'. When combined with automatic cleanup, GDateTime
often results in simpler code too.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
|
|
Multipath TCP allows combining multiple interfaces/routes into a single
socket, with very little work for the user/admin.
It's enabled by 'mptcp' on most socket addresses:
./qemu-system-x86_64 -nographic -incoming tcp:0:4444,mptcp
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20210421112834.107651-6-dgilbert@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
Call the notifier during finalize; it's currently only called
if we change it, which is not the intent.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210421112834.107651-3-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
MSG_CMSG_CLOEXEC cleans up received fd's; it's really only for Unix
sockets, but currently we enable it for everything; some socket types
(IP_MPTCP) don't like this.
Only enable it when we're giving the recvmsg room to receive fd's
anyway.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210421112834.107651-2-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
Commit e50caf4a5c ("tracing: convert documentation to rST")
converted docs/devel/tracing.txt to docs/devel/tracing.rst.
We still have several references to the old file, so let's fix them
with the following command:
sed -i s/tracing.txt/tracing.rst/ $(git grep -l docs/devel/tracing.txt)
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210517151702.109066-2-sgarzare@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
Using error_prepend() in qio_channel_readv_full_all() causes a segfault
as errp is not set when ret is 0. This results in the failure of iotest
83. Replacing with error_setg() fixes the problem.
Additionally, removes a full stop at the end of error message
Reported-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Fixes: bebab91ebdfc591f8793a9a17370df1bfbe8b2ca
(io: add qio_channel_readv_full_all_eof & qio_channel_readv_full_all helpers)
Message-Id: <be476bcdb99e820fec0fa09fe8f04c9dd3e62473.1613128220.git.jag.raman@oracle.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
|
|
Adds qio_channel_readv_full_all_eof() and qio_channel_readv_full_all()
to read both data and FDs. Refactors existing code to use these helpers.
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: b059c4cc0fb741e794d644c144cc21372cad877d.1611938319.git.jag.raman@oracle.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Adds qio_channel_writev_full_all() to transmit both data and FDs.
Refactors existing code to use this helper.
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 480fbf1fe4152495d60596c9b665124549b426a5.1611938319.git.jag.raman@oracle.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
staging
Yank patches patches for 2021-01-13
# gpg: Signature made Wed 13 Jan 2021 09:25:46 GMT
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-yank-2021-01-13:
tests/test-char.c: Wait for the chardev to connect in char_socket_client_dupid_test
io: Document qmp oob suitability of qio_channel_shutdown and io_shutdown
io/channel-tls.c: make qio_channel_tls_shutdown thread-safe
migration: Add yank feature
chardev/char-socket.c: Add yank feature
block/nbd.c: Add yank feature
Introduce yank feature
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Make qio_channel_tls_shutdown thread-safe by using atomics when
accessing tioc->shutdown.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <5bd8733f583f3558b32250fd0eb576b7aa756485.1609167865.git.lukasstraub2@web.de>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
crypto/tlscreds.h includes GnuTLS headers if CONFIG_GNUTLS is set, but
GNUTLS_CFLAGS, that describe include path, are not propagated
transitively to all users of crypto and build fails if GnuTLS headers
reside in non-standard directory (which is a case for homebrew on Apple
Silicon).
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Message-Id: <20210102125213.41279-1-r.bolshakov@yadro.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: AlexChen <alex.chen@huawei.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
|
|
There is no "version 2" of the "Lesser" General Public License.
It is either "GPL version 2.0" or "Lesser GPL version 2.1".
This patch replaces all occurrences of "Lesser GPL version 2" with
"Lesser GPL version 2.1" in comment section.
Signed-off-by: Chetan Pant <chetan4windows@gmail.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
|
|
Be consistent creating all the libraries in the main meson.build file.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201006125602.2311423-7-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The requirement to specify the parent class type makes the macro
harder to use and easy to misuse (silent bugs can be introduced
if the wrong struct type is specified).
Simplify the macro by just not declaring any class struct,
allowing us to remove the class_size field from the TypeInfo
variables for those types.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200916182519.415636-3-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
|
|
We want to introduce a new version of qemu_open() that uses an Error
object for reporting problems and make this it the preferred interface.
Rename the existing method to release the namespace for the new impl.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
|
|
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Meson doesn't enjoy the same flexibility we have with Make in choosing
the include path. In particular the tracing headers are using
$(build_root)/$(<D).
In order to keep the include directives unchanged,
the simplest solution is to generate headers with patterns like
"trace/trace-audio.h" and place forwarding headers in the source tree
such that for example "audio/trace.h" includes "trace/trace-audio.h".
This patch is too ugly to be applied to the Makefiles now. It's only
a way to separate the changes to the tracing header files from the
Meson rewrite of the tracing logic.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
We need "qom/object.h" to call object_ref()/object_unref(),
and to test the TYPE_DUMMY.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200504115656.6045-3-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL. Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call.
qio_channel_socket_close() passes @errp first to
socket_listen_cleanup(), and then, if closesocket() fails, to
error_setg_errno(). If socket_listen_cleanup() failed, this will trip
the assertion in error_setv().
Fix by ignoring a second error.
Fixes: 73564c407caedf992a1c688b5fea776a8b56ba2a
Cc: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200422130719.28225-11-armbru@redhat.com>
|
|
noVNC doesn't use 'binary' protocol by default after
commit c912230309806aacbae4295faf7ad6406da97617.
It will cause qemu return 400 when handshaking.
To overcome this problem and remain compatibility of
older noVNC client.
We treat 'binary' and no sub-protocol as the same
so that we can support different version of noVNC
client.
Tested on noVNC before c912230 and after c912230.
Buglink: https://bugs.launchpad.net/qemu/+bug/1849644
Signed-off-by: Yu-Chen Lin <npes87184@gmail.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
|
|
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
Current parameter was always one. We continue with that value for now
in all callers.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
---
Moved trace to socket_listen
|
|
After g_source_attach() the GMainContext holds a reference to the
GSource, so the caller does not need to keep it.
qio_task_thread_worker() is not releasing its reference so the GSource
is being leaked since a17536c594bfed94d05667b419f747b692f5fc7f.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <1565625509-404969-2-git-send-email-andrey.shinkevich@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
No header includes qemu-common.h after this commit, as prescribed by
qemu-common.h's file comment.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-5-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c
block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c
target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h
target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h
target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h
target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and
net/tap-bsd.c fixed up]
|
|
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-4-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
hw/usb/dev-hub.c hw/misc/exynos4210_rng.c hw/misc/bcm2835_rng.c
hw/misc/aspeed_scu.c hw/display/virtio-vga.c hw/arm/stm32f205_soc.c;
ui/cocoa.m fixed up]
|
|
We spell out sub/dir/ in sub/dir/trace-events' comments pointing to
source files. That's because when trace-events got split up, the
comments were moved verbatim.
Delete the sub/dir/ part from these comments. Gets rid of several
misspellings.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190314180929.27722-3-armbru@redhat.com
Message-Id: <20190314180929.27722-3-armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
We were never reporting the G_IO_HUP event when an end of file was hit
on the websocket channel.
We also didn't report G_IO_ERR when we hit a fatal error processing the
websocket protocol.
The latter in particular meant that the chardev code would not notice
when an eof/error was encountered on the websocket channel, unless the
guest OS happened to trigger a write operation.
This meant that once the first client had quit, the chardev would never
listen to accept a new client.
Fixes launchpad bug 1816819
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
|
|
qio_channel_yield() now updates ioc->read_write/coroutine and calls
qio_channel_set_aio_fd_handlers(), so the code in the handlers has
become redundant and can be removed.
This does not make a difference in intermediate states because
aio_co_wake() really enters the coroutine immediately here: These
handlers are never run in coroutine context, and we're in the right
AioContext because qio_channel_attach_aio_context() asserts that the
handlers are inactive.
To make these conditions more obvious, assert the right AioContext.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Similar to how qemu_co_sleep_ns() allows preemption from an external
coroutine entry, allow reentering qio_channel_yield() early.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Add the ability for a caller to wait for completion of the
background thread to synchronously dispatch its result, without
needing to wait for the main loop to run the idle callback.
This method needs very careful usage to avoid a dangerous
race condition with the free'ing of the task. The completion
callback is normally invoked from an idle callback registered
with the main loop context. The qio_task_wait_thread method
must only be called if the completion callback has not yet
run. The only safe way to achieve this is to run the
qio_task_wait_thread method from the thread that executes
the main loop.
It is generally a bad idea to use this method since it will
block execution of the main loop, however, the design of
the character devices and its usage from vhostuser already
requires blocking execution.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190211182442.8542-3-berrange@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
|
|
Currently the struct QIOTaskThreadData is only needed by the worker
thread, but a subsequent patch will need to access it from another
context.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190211182442.8542-2-berrange@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
|
|
The qio_channel_socket_close method for was mistakenly unlinking the
UNIX server socket, even if the channel was a client connection. This
was not noticed with chardevs, since they never call close, but with the
VNC server, this caused the VNC server socket to be deleted after the
first client quit.
The qio_channel_socket_close method also needlessly reimplemented the
logic that already exists in socket_listen_cleanup(). Just call that
method directly, for listen sockets only.
This fixes a regression introduced in QEMU 3.0.0 with
commit d66f78e1eaa832f73c771d9df1b606fe75d52a50
Author: Pavel Balaev <mail@void.so>
Date: Mon May 21 19:17:35 2018 +0300
Delete AF_UNIX socket after close
Fixes launchpad #1795100
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
|
|
GNUTLS takes a paranoid approach when seeing 0 bytes returned by the
underlying OS read() function. It will consider this an error and
return GNUTLS_E_PREMATURE_TERMINATION instead of propagating the 0
return value. It expects apps to arrange for clean termination at
the protocol level and not rely on seeing EOF from a read call to
detect shutdown. This is to harden apps against a malicious 3rd party
causing termination of the sockets layer.
This is unhelpful for the QEMU NBD code which does have a clean
protocol level shutdown, but still relies on seeing 0 from the I/O
channel read in the coroutine handling incoming replies.
The upshot is that when using a plain NBD connection shutdown is
silent, but when using TLS, the client spams the console with
Cannot read from TLS channel: Broken pipe
The NBD connection has, however, called qio_channel_shutdown()
at this point to indicate that it is done with I/O. This gives
the opportunity to optimize the code such that when the channel
has been shutdown in the read direction, the error code
GNUTLS_E_PREMATURE_TERMINATION gets turned into a '0' return
instead of an error.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20181119134228.11031-1-berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
|
|
Missed in f69a8bde293.
Thanks Valgrind:
==955== 217 bytes in 1 blocks are definitely lost in loss record 275 of 321
==955== at 0x483A965: realloc (vg_replace_malloc.c:785)
==955== by 0x50B6839: __vasprintf_chk (in /usr/lib64/libc-2.28.so)
==955== by 0x49AA05C: g_vasprintf (in /usr/lib64/libglib-2.0.so.0.5800.1)
==955== by 0x4983440: g_strdup_vprintf (in /usr/lib64/libglib-2.0.so.0.5800.1)
==955== by 0x126048: qio_channel_websock_handshake_send_res (channel-websock.c:162)
==955== by 0x1266E6: qio_channel_websock_handshake_send_res_ok (channel-websock.c:362)
==955== by 0x126D3E: qio_channel_websock_handshake_process (channel-websock.c:468)
==955== by 0x126EF2: qio_channel_websock_handshake_read (channel-websock.c:511)
==955== by 0x12715B: qio_channel_websock_handshake_io (channel-websock.c:571)
==955== by 0x125027: qio_channel_fd_source_dispatch (channel-watch.c:84)
==955== by 0x496326C: g_main_context_dispatch (in /usr/lib64/libglib-2.0.so.0.5800.1)
==955== by 0x169EC3: glib_pollfds_poll (main-loop.c:215)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
|
|
Since version 2.12.0 AF_UNIX socket created for QMP exchange is not
deleted on instance shutdown.
This is due to the fact that function qio_channel_socket_finalize() is
called after qio_channel_socket_close().
Signed-off-by: Pavel Balaev <mail@void.so>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
|
|
Re-run Coccinelle script scripts/coccinelle/return_directly.cocci
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
ppc part
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
Re-run Coccinelle patch
scripts/coccinelle/error_propagate_null.cocci
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20180323143202.28879-4-lvivier@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
|
|
The fd_is_socket() helper method is useful in a few places, so put it in
the common sockets code. Make the code more compact while moving it.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
|
|
A new parameter "context" is added to qio_channel_tls_handshake() is to
allow the TLS to be run on a non-default context. Still, no functional
change.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
|
|
We have worked on qio_task_run_in_thread() already. Further, let
all the qio channel APIs use that context.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
|
|
qio_task_run_in_thread() allows main thread to run blocking operations
in the background. However it has an assumption on that it's always
working with the default context. This patch tries to allow the threaded
QIO task framework to run with non-default gcontext.
Currently no functional change so far, so the QIOTasks are still always
running on main context.
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
|
|
Originally we were storing the GSources tag IDs. That'll be not enough
if we are going to support non-default gcontext for QIO code. Switch to
GSources without changing anything real. Now we still always pass in
NULL, which means the default gcontext.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
|
|
Firstly, introduce an internal qio_channel_add_watch_full(), which
enhances qio_channel_add_watch() that context can be specified.
Then add a new API wrapper qio_channel_add_watch_source() to return a
GSource pointer rather than a tag ID.
Note that the _source() call will keep a reference of GSource so that
callers need to unref them explicitly when finished using the GSource.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
|
|
It is strange that it was called gio_task_thread_result. Rename it to
follow the naming rule of the file.
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
|
|
In my "build everything" tree, a change to the types in
qapi-schema.json triggers a recompile of about 4800 out of 5100
objects.
The previous commit split up qmp-commands.h, qmp-event.h, qmp-visit.h,
qapi-types.h. Each of these headers still includes all its shards.
Reduce compile time by including just the shards we actually need.
To illustrate the benefits: adding a type to qapi/migration.json now
recompiles some 2300 instead of 4800 objects. The next commit will
improve it further.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-24-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[eblake: rebase to master]
Signed-off-by: Eric Blake <eblake@redhat.com>
|
|
We are currently facing some migration failure on s390x when running
certain avocado-vt tests, e.g. when running the test
type_specific.io-github-autotest-qemu.migrate.with_reboot.exec.gzip_exec.
This test is using 'migrate -d "exec:nc localhost 5200"' for the migration.
The problem is detected at the receiving side, where the migration stream
apparently ends too early. However, the cause for the problem is at the
sending side: After writing the migration stream into the pipe to netcat,
the source QEMU calls qio_channel_command_close() which closes the pipe
and immediately (!) kills the child process afterwards (via the function
qio_channel_command_abort()). So if the sending netcat did not read the
final bytes from the pipe yet, or if it did not manage to send out all
its buffers yet, it is killed before the whole migration stream is passed
to the destination side.
QEMU can not know how much time is required by the child process to send
over all migration data, so we should not kill it, neither directly nor
after a delay. Let's simply wait for the child process to exit gracefully
instead (this was also the behaviour of pclose() that was used in "exec:"
migration before the QIOChannel rework).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
|
|
Add /dev/fdset/ support to QIOChannelFile by calling qemu_open() instead
of open() and qemu_close() instead of close(). There is a subtle
semantic change since qemu_open() automatically sets O_CLOEXEC, but this
doesn't affect any of the users of the function.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
|