Age | Commit message (Collapse) | Author |
|
This helper get the highest 1 bit position of the upper bound.
If the range is empty or upper bound is zero, -1 is returned.
Suggested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
|
|
TYPE_HOST_IOMMU_DEVICE_IOMMUFD represents a host IOMMU device under
iommufd backend. It is abstract, because it is going to be derived
into VFIO or VDPA type'd device.
It will have its own .get_cap() implementation.
TYPE_HOST_IOMMU_DEVICE_IOMMUFD_VFIO is a sub-class of
TYPE_HOST_IOMMU_DEVICE_IOMMUFD, represents a VFIO type'd host IOMMU
device under iommufd backend. It will be created during VFIO device
attaching and passed to vIOMMU.
It will have its own .realize() implementation.
Opportunistically, add missed header to include/sysemu/iommufd.h.
Suggested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
|
|
TYPE_HOST_IOMMU_DEVICE_LEGACY_VFIO represents a host IOMMU device under
VFIO legacy container backend.
It will have its own realize implementation.
Suggested-by: Eric Auger <eric.auger@redhat.com>
Suggested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
|
|
HostIOMMUDeviceCaps's elements map to the host IOMMU's capabilities.
Different platform IOMMU can support different elements.
Currently only two elements, type and aw_bits, type hints the host
platform IOMMU type, i.e., INTEL vtd, ARM smmu, etc; aw_bits hints
host IOMMU address width.
Introduce .get_cap() handler to check if HOST_IOMMU_DEVICE_CAP_XXX
is supported.
Suggested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
|
|
A HostIOMMUDevice is an abstraction for an assigned device that is protected
by a physical IOMMU (aka host IOMMU). The userspace interaction with this
physical IOMMU can be done either through the VFIO IOMMU type 1 legacy
backend or the new iommufd backend. The assigned device can be a VFIO device
or a VDPA device. The HostIOMMUDevice is needed to interact with the host
IOMMU that protects the assigned device. It is especially useful when the
device is also protected by a virtual IOMMU as this latter use the translation
services of the physical IOMMU and is constrained by it. In that context the
HostIOMMUDevice can be passed to the virtual IOMMU to collect physical IOMMU
capabilities such as the supported address width. In the future, the virtual
IOMMU will use the HostIOMMUDevice to program the guest page tables in the
first translation stage of the physical IOMMU.
Introduce .realize() to initialize HostIOMMUDevice further after instance init.
Suggested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
|
|
https://gitlab.com/stsquad/qemu into staging
maintainer updates (plugins, gdbstub):
- add missing include guard comment to gdbstub.h
- move gdbstub enums into separate header
- move qtest_[get|set]_virtual_clock functions
- allow plugins to manipulate the virtual clock
- introduce an Instructions Per Second plugin
- fix inject_mem_cb rw mask tests
- allow qemu_plugin_vcpu_mem_cb to shortcut when no memory cbs
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmZ5OjoACgkQ+9DbCVqe
# KkQPlwf/VK673BAjYktuCLnf3DgWvIkkiHWwzBREP5MmseUloLjK2CQPLY/xWZED
# pbA/1OSzHViD/mvG5wTxwef36b9PIleWj5/YwBxGlrb/rh6hCd9004pZK4EMI3qU
# 53SK8Qron8TIXjey6XfmAY8rcl030GsHr0Zqf5i2pZKE5g0iaGlM3Cwkpo0SxQsu
# kMNqiSs9NzX7LxB+YeuAauIvC1YA2F/MGTXeFCTtO9Beyp5oV7oOI+2zIvLjlG5M
# Z5hKjG/STkNOteoIBGZpe1+QNpoGHSBoGE3nQnGpXb82iLx1KVBcKuQ6GoWGv1Wo
# hqiSh9kJX479l0mLML+IzaDsgSglbg==
# =pvWx
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 24 Jun 2024 02:19:54 AM PDT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
* tag 'pull-maintainer-june24-240624-1' of https://gitlab.com/stsquad/qemu:
accel/tcg: Avoid unnecessary call overhead from qemu_plugin_vcpu_mem_cb
plugins: fix inject_mem_cb rw masking
contrib/plugins: add Instructions Per Second (IPS) example for cost modeling
plugins: add migration blocker
plugins: add time control API
qtest: move qtest_{get, set}_virtual_clock to accel/qtest/qtest.c
sysemu: generalise qtest_warp_clock as qemu_clock_advance_virtual_time
qtest: use cpu interface in qtest_clock_warp
sysemu: add set_virtual_time to accel ops
plugins: Ensure register handles are not NULL
gdbstub: move enums into separate header
include/exec: add missing include guard comment
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Expose the ability to control time through the plugin API. Only one
plugin can control time so it has to request control when loaded.
There are probably more corner cases to catch here.
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
[AJB: tweaked user-mode handling, merged QEMU_PLUGIN_API fix]
Message-Id: <20240530220610.1245424-6-pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240620152220.2192768-9-alex.bennee@linaro.org>
|
|
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240530220610.1245424-5-pierrick.bouvier@linaro.org>
Message-Id: <20240620152220.2192768-8-alex.bennee@linaro.org>
|
|
Move the key functionality of moving time forward into the clock
sub-system itself. This will allow us to plumb in time control into
plugins.
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240620152220.2192768-7-alex.bennee@linaro.org>
|
|
This generalises the qtest_clock_warp code to use the AccelOps
handlers for updating its own sense of time. This will make the next
patch which moves the warp code closer to pure code motion.
From: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20240530220610.1245424-3-pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240620152220.2192768-6-alex.bennee@linaro.org>
|
|
We are about to remove direct calls to individual accelerators for
this information and will need a central point for plugins to hook
into time changes.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240530220610.1245424-2-pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240620152220.2192768-5-alex.bennee@linaro.org>
|
|
This is an experiment to further reduce the amount we throw into the
exec headers. It might not be as useful as I initially thought because
just under half of the users also need gdbserver_start().
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240620152220.2192768-3-alex.bennee@linaro.org>
|
|
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240620152220.2192768-2-alex.bennee@linaro.org>
|
|
Commit 14180d6221 ("bswap: Add the ability to store to an
unaligned 24 bit field") added st24_le_p() for little
endianness, add st24_be_p() equivalent for bit one.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240621075607.17902-1-philmd@linaro.org>
|
|
Since the realize() handler of S390CCWDeviceClass takes an 'Error **'
argument, best practices suggest to return a bool. See the api/error.h
Rules section. While at it, modify the call in vfio_ccw_realize().
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Anthony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240522170107.289532-5-clg@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
https://git.linaro.org/people/pmaydell/qemu-arm into staging
target-arm queue:
* hw/net/can/xlnx-versal-canfd: Fix sorting of the tx queue
* hw/arm/xilinx_zynq: Fix IRQ/FIQ routing
* hw/intc/arm_gic: Fix deactivation of SPI lines
* hw/timer/a9gtimer: Handle QTest mode in a9_gtimer_get_current_cpu
* hw/misc: Set valid access size for Exynos4210 RNG
* hw/arm/sbsa-ref: switch to 1GHz timer frequency
* hw/arm/sbsa-ref: Enable CPU cluster on ARM sbsa machine
* hw/arm/virt: allow creation of a second NonSecure UART
* hw/arm/virt: Avoid unexpected warning from Linux guest on host with Fujitsu CPUs
* scripts/coverity-scan/COMPONENTS.md: update component regexes
* hw/usb/hcd-dwc2: Handle invalid address access in read and write functions
* hw/usb/hcd-ohci: Fix ohci_service_td: accept zero-length TDs where CBP=BE+1
# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmZ2vigZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3mRzD/9+Upo0E9GoNE8FaZYk+xw9
# tB7V0C5RxZCW74ggjsoRSs2Mq45X+jzjT5cmlo3bCyj9z146eyOovcqroJHlggy7
# W3nqE7Yg6tUz6MEbrDq54BVNGmBdwY4kpYr5MvXrhtb9A+/QjaW8MqlmT5NCvUb+
# KZ+i4PTAF5dALCZblnqL5+9RYfwMOeR8R03ZbV2H0OCvO16N1rWsgoRzReVbpmy2
# LEXGber13O7HnSRiMjvxTn92yZBO+tgmLB5w6V4aaYKEhj3B0wTO+GVEUMz0Rmzw
# LunrZhtQql9MOrdJIvgPrrFRmGHamnNu3IV0750xrRPQ1mJlVevaaCpl1IlaVeXG
# /PnY8HWaDJgwlPMDZVga38KSVQavdC8/Uvdw816a0rBzbclAAUZSNf8cuNeJ7qmk
# 2CQp/C8vuarWH0Ut0Qav8uuepd5jDt5TT3crBPhxMRwxsNTsSgjXxe7s3jdVWe2C
# +z1sC/KnSmmFUwyu14GA4WsUdz05m4Mmixz4unXemMeexibUA3n4RSTiUYzTNcb4
# NmhEY4WbhuDtnSqqeSFyKtS5WCIG9A8YmcEzHWNsbaZAIEdS5QlxCSocbzG2mO6G
# zD/kWMn0nmYWejYgaT3LcL5BvkwmePV6u3jQNmVL8aQgG+OPZh7tvCR2gSMPWpml
# Y2pVvKZ+Tcx3GqZOUqKsrA==
# =oPnm
# -----END PGP SIGNATURE-----
# gpg: Signature made Sat 22 Jun 2024 05:06:00 AM PDT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [unknown]
* tag 'pull-target-arm-20240622' of https://git.linaro.org/people/pmaydell/qemu-arm:
hw/arm/sbsa-ref: Enable CPU cluster on ARM sbsa machine
hw/usb/hcd-ohci: Fix ohci_service_td: accept zero-length TDs where CBP=BE+1
hw/misc: Set valid access size for Exynos4210 RNG
hw/arm/virt: Avoid unexpected warning from Linux guest on host with Fujitsu CPUs
hw/arm/virt: allow creation of a second NonSecure UART
hw/arm/virt: Rename VIRT_UART and VIRT_SECURE_UART to VIRT_UART[01]
hw/arm/virt: Add serial aliases in DTB
hw/usb/hcd-dwc2: Handle invalid address access in read and write functions
hw/timer/a9gtimer: Handle QTest mode in a9_gtimer_get_current_cpu
scripts/coverity-scan/COMPONENTS.md: Include libqmp in testlibs
scripts/coverity-scan/COMPONENTS.md: Fix monitor component
scripts/coverity-scan/COMPONENTS.md: Add crypto headers in host/include to the crypto component
scripts/coverity-scan/COMPONENTS.md: Fix 'char' component
scripts/coverity-scan/COMPONENTS.md: Update paths to match gitlab CI
hw/arm/xilinx_zynq: Fix IRQ/FIQ routing
hw/intc/arm_gic: Fix deactivation of SPI lines
hw/arm/sbsa-ref: switch to 1GHz timer frequency
hw/net/can/xlnx-versal-canfd: Fix sorting of the tx queue
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Last use of VMSTATE_ARRAY_TEST() was removed in commit 46baa9007f
("migration/i386: Remove old non-softfloat 64bit FP support"), we
can safely get rid of it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
|
|
For some use-cases, it is helpful to have more than one UART
available to the guest. If the second UART slot is not already used
for a TrustZone Secure-World-only UART, create it as a NonSecure UART
only when the user provides a serial backend (e.g. via a second
-serial command line option).
This avoids problems where existing guest software only expects a
single UART, and gets confused by the second UART in the DTB. The
major example of this is older EDK2 firmware, which will send the
GRUB bootloader output to UART1 and the guest serial output to UART0.
Users who want to use both UARTs with a guest setup including EDK2
are advised to update to EDK2 release edk2-stable202311 or newer.
(The prebuilt EDK2 blobs QEMU upstream provides are new enough.)
The relevant EDK2 changes are the ones described here:
https://bugzilla.tianocore.org/show_bug.cgi?id=4577
Inspired-by: Axel Heider <axel.heider@hensoldt.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240610162343.2131524-4-peter.maydell@linaro.org
|
|
We're going to make the second UART not always a secure-only device.
Rename the constants VIRT_UART and VIRT_SECURE_UART to VIRT_UART0
and VIRT_UART1 accordingly.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240610162343.2131524-3-peter.maydell@linaro.org
|
|
Add the direct-io migration parameter that tells the migration code to
use O_DIRECT when opening the migration stream file whenever possible.
This is currently only used with the mapped-ram migration that has a
clear window guaranteed to perform aligned writes.
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
|
|
I'm keeping the EACCES because callers expect to be able to look at
errno.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
|
|
Those functions are not needed, one remove function should already
work. Clean it up.
Here the code doesn't really care about whether we need to keep that dupfd
around if close() failed: when that happens something got very wrong,
keeping the dup_fd around the fdsets may not help that situation so far.
Cc: Dr. David Alan Gilbert <dave@treblig.org>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
[add missing return statement, removal during traversal is not safe]
Signed-off-by: Fabiano Rosas <farosas@suse.de>
|
|
Make the MemOp enum cast explicit to use the QEMU
headers with a C++ compiler.
Signed-off-by: Roman Kiryanov <rkir@google.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240618224528.878425-1-rkir@google.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
Boolean return value is reversed, to align with QEMU_ALLOCATED_FLAG, so
all callers must be adapted. Also rename share_surface variable in
vga_draw_graphic() to reduce confusion.
No functional change.
Suggested-by: Marc-André Lureau <marcandre.lureau@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <20240605131444.797896-4-kraxel@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
No functional change.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240605131444.797896-3-kraxel@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
s390_skeys_set() dispatch to S390SKeysClass::set_skeys(),
and s390_skeys_get() to S390SKeysClass::get_skeys().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20240613104415.9643-2-philmd@linaro.org>
|
|
The real IPI hardware have dedicated MMIO registers mapped into
memory address space for every core. This is not used by LoongArch
guest software but it is essential for CPU without IOCSR such as
Loongson-3A1000.
Implement it with existing infrastructure.
Acked-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-ID: <20240605-loongson3-ipi-v3-2-ddd2c0e03fa3@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
@event access is read-only.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <20240612132532.85928-3-philmd@linaro.org>
|
|
@event access is read-only.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <20240612132532.85928-2-philmd@linaro.org>
|
|
Replace Monitor API by HumanReadableText one (see commit f2de406f29
"docs/devel: document expectations for QAPI data modelling for QMP"
for rationale).
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20240610063518.50680-2-philmd@linaro.org>
|
|
Replace Monitor API by HumanReadableText one.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-Id: <20240610062105.49848-27-philmd@linaro.org>
|
|
Replace Monitor API by HumanReadableText one.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-Id: <20240610062105.49848-25-philmd@linaro.org>
|
|
Replace Monitor API by HumanReadableText one.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-Id: <20240610062105.49848-24-philmd@linaro.org>
|
|
Replace Monitor API by HumanReadableText one.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-Id: <20240610062105.49848-23-philmd@linaro.org>
|
|
Replace Monitor API by HumanReadableText one.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-Id: <20240610062105.49848-21-philmd@linaro.org>
|
|
Replace Monitor API by HumanReadableText one.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-Id: <20240610062105.49848-20-philmd@linaro.org>
|
|
Replace Monitor API by HumanReadableText one.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-Id: <20240610062105.49848-19-philmd@linaro.org>
|
|
Replace Monitor API by HumanReadableText one.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-Id: <20240610062105.49848-18-philmd@linaro.org>
|
|
Replace Monitor API by HumanReadableText one.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-Id: <20240610062105.49848-17-philmd@linaro.org>
|
|
Replace Monitor API by HumanReadableText one.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-Id: <20240610062105.49848-16-philmd@linaro.org>
|
|
Replace Monitor API by HumanReadableText one.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-Id: <20240610062105.49848-14-philmd@linaro.org>
|
|
Replace Monitor API by HumanReadableText one.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-Id: <20240610062105.49848-13-philmd@linaro.org>
|
|
Replace Monitor API by HumanReadableText one.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-Id: <20240610062105.49848-12-philmd@linaro.org>
|
|
Replace Monitor API by HumanReadableText one.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-Id: <20240610062105.49848-11-philmd@linaro.org>
|
|
Replace Monitor API by HumanReadableText one.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-Id: <20240610062105.49848-10-philmd@linaro.org>
|
|
Replace Monitor API by HumanReadableText one.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-Id: <20240610062105.49848-7-philmd@linaro.org>
|
|
Replace Monitor API by HumanReadableText one.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-Id: <20240610062105.49848-6-philmd@linaro.org>
|
|
Replace Monitor API by HumanReadableText one.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-Id: <20240610062105.49848-5-philmd@linaro.org>
|
|
Replace Monitor API by HumanReadableText one.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-Id: <20240610062105.49848-4-philmd@linaro.org>
|
|
Replace Monitor API by HumanReadableText one.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-Id: <20240610062105.49848-3-philmd@linaro.org>
|