| Age | Commit message (Collapse) | Author |
|---|
|
mch_mcfg_base has been unused since it was added by
6f1426ab0f ("ich9: APIs for pc guest info")
back in 2013.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <dave@treblig.org>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
xen_be_copy_grant_refs is unused since 2019's
19f87870ba ("xen: remove the legacy 'xen_disk' backend")
xen_config_dev_console is unused since 2018's
6d7c06c213 ("Remove broken Xen PV domain builder")
Remove them.
Signed-off-by: Dr. David Alan Gilbert <dave@treblig.org>
Acked-by: Anthony PERARD <anthony.perard@vates.tech>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
xen_be_copy_grant_refs is unused since 2019's
19f87870ba ("xen: remove the legacy 'xen_disk' backend")
xen_config_dev_console is unused since 2018's
6d7c06c213 ("Remove broken Xen PV domain builder")
Remove them.
Signed-off-by: Dr. David Alan Gilbert <dave@treblig.org>
Acked-by: Anthony PERARD <anthony.perard@vates.tech>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
|
|
https://github.com/alistair23/qemu into staging
RISC-V PR for 9.2
* Add a property to set vl to ceil(AVL/2)
* Enable numamem testing for RISC-V
* Consider MISA bit choice in implied rule
* Fix the za64rs priv spec requirements
* Enable Bit Manip for OpenTitan Ibex CPU
* Fix the group bit setting of AIA with KVM
* Stop timer with infinite timecmp
* Add 'fcsr' register to QEMU log as a part of F extension
* Fix riscv64 build on musl libc
* Add preliminary textra trigger CSR functions
* RISC-V bsd-user support
* Respect firmware ELF entry point
* Add Svvptc extension support
* Fix masking of rv32 physical address
* Fix linking problem with semihosting disabled
* Fix IMSIC interrupt state updates
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmb83lYACgkQr3yVEwxT
# gBNndBAAmh66yWt9TeTHlQ/rgBhx2nUMBbfICBWQyNGvPlslffwrNoLkh8jpkuiP
# PD0RQArAAGeM09cgCZCu14JzIBmmNiGgUxsUnqOZvUw18uIlLFlpt/tiT7iGw/Xb
# pfI7waF66/FPXBErY2yiw9/RGQLlkiGNBC9FNYrD/kCahf9MSIobv85tOgSQ2qjH
# nOJ+UBN0TQ1x0Z5lJMj9Pzl1WDvelRnCkYI5nXg1heKG73Hm7GmHt99QpTV2Okqn
# T3jFzEfMTQeHO4nC/X2pbaesE62K+mTg/FZpId2iV8lMCSm1zKof+xJ4boKM9RB2
# 0HjXAT+MveLuLUNtgfbV9C+VgU25M+wnfy5tH0l801Y/Gez8Q1fbK2uykuiyiUSy
# MNNk/KzmOYuffwItuyeL3mmWHXsN+izUIeMmMxfL9X9nssZXRsrDXc+MByS7w0fk
# QOeZmXHTxXwxFymr0t0DLK2eKEG6cqQty1KWp6iLx3uwnMTGo+576P41Q+boj64s
# VllWzmuR0Ta0xuSR4sDvEFCO7OCFEgVdn1j0FvhRFskPEDrbQgXRLq8i3awtU6z1
# NIh+A30XeK+EZLv0sEje6gav5lZHWMfAeCOKJstVzOl8+NQibuKTUrsqLgTrBK6K
# plw8qwvZYjSnYErzHfywlq9ArufIvOHYcx9Nb76tLNy9E+y01yo=
# =15Hm
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 02 Oct 2024 06:47:02 BST
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013
* tag 'pull-riscv-to-apply-20241002' of https://github.com/alistair23/qemu: (35 commits)
bsd-user: Add RISC-V 64-bit Target Configuration and Debug XML Files
bsd-user: Implement set_mcontext and get_ucontext_sigreturn for RISCV
bsd-user: Implement 'get_mcontext' for RISC-V
bsd-user: Implement RISC-V signal trampoline setup functions
bsd-user: Define RISC-V signal handling structures and constants
bsd-user: Add generic RISC-V64 target definitions
bsd-user: Define RISC-V system call structures and constants
bsd-user: Define RISC-V VM parameters and helper functions
bsd-user: Add RISC-V thread setup and initialization support
bsd-user: Implement RISC-V sysarch system call emulation
bsd-user: Add RISC-V signal trampoline setup function
bsd-user: Define RISC-V register structures and register copying
bsd-user: Add RISC-V ELF definitions and hardware capability detection
bsd-user: Implement RISC-V TLS register setup
bsd-user: Implement RISC-V CPU register cloning and reset functions
bsd-user: Add RISC-V CPU execution loop and syscall handling
bsd-user: Implement RISC-V CPU initialization and main loop
hw/intc: riscv-imsic: Fix interrupt state updates.
target/riscv/cpu_helper: Fix linking problem with semihosting disabled
target/riscv32: Fix masking of physical address
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
staging
* Fix mips64el in the CI
* Remove unused sh4eb target
* Add an additional EXECUTE TCG test for s390x
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmb9QdARHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbWQsQ/+NyTWEdTVXYLKGjv17QE3s5irfH6pT6WB
# Ea5HOkiT7mAOJZEzHS38fUzgySFA24MOpeqqPK6Dyi6O/fpXKkJL+e1Km2qWvc66
# NCKsicj271+AWHOrT2KnWnk6zRnxJBpeV/c/ajJnyjTAOYc5ItBPeNlfDsj1+sNP
# UzQ3mTmiw6M9jDntvJCtC99NyBBZTuyFLp/5ZA/fXCJdmzVEHEOU/rjWuVIq1nDC
# zm3MxUZwheHAkJ5wk7O+T3Qsio5iGBCeWBeNsH6hy6KyAf7fhU3h5vn4zaVzKQPB
# 88I8BbPok5sIVB1ODseIZLiF4IWZt8cPV00SJVSNebyufJ6wsuEFLT+nbMcQy4K1
# hZMvqA2WY+MGyThF67iC8OtaeDksUBoYw6RM0cCGlRQ2fsR4QAahk8Cg1BIG6Hn7
# hYtKu68Rs+vrxH6lgjq9wWBrafl7MbROQxlTm8KsJJdHigQ4UUB23+OKKcJrePi+
# vQpFEWIEgLVrxUrnwyJPulqG5fVXNkOWYfu1Y/WARr7uNe4gf86UvBunQmSxlV3Y
# 4Q1iQlKaVznzyUe8QEvP8LpZRols0v5BT9zpF0TJwC/vk+SjuAtz4/URWvLn5Qwd
# zIhWp9ZUxHUJgCqiciNHAY1AzsG2CiSuihKgTbPBZo0b3oYMB7sMaDLq733M98k2
# lI6f5DjIyhg=
# =V9nZ
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 02 Oct 2024 13:51:28 BST
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2024-10-02' of https://gitlab.com/thuth/qemu:
tests/tcg/s390x: Test modifying an EXECUTE target
qemu-timer: Remove unused timer functions
Remove the unused sh4eb target
configs: Fix typo in the sh4-softmmu devices config file
testing: bump mips64el cross to bookworm and fix package list
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
qemu_clock_get_main_loop_timerlist and timerlist_get_clock have been
unused since they were originally added in
ff83c66ecc ("aio / timers: Split QEMUClock into QEMUClock and QEMUTimerList")
Remove them.
Signed-off-by: Dr. David Alan Gilbert <dave@treblig.org>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Message-ID: <20240919144124.309646-1-dave@treblig.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
When riscv_load_firmware() loads an ELF, the ELF segment addresses are
used, not the passed-in firmware_load_addr. The machine models assume
the firmware entry point is what they provided for firmware_load_addr,
and use that address to generate the boot ROM, so if the ELF is linked
at any other address, the boot ROM will jump to empty memory.
Pass back the ELF entry point to use when generating the boot ROM, so
the boot ROM can jump to firmware loaded anywhere in RAM. For example,
on the virt machine, this allows using an OpenSBI fw_dynamic.elf built
with FW_TEXT_START values other than 0x80000000.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240817002651.3209701-1-samuel.holland@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
|
|
Remove some defines and enums that are OMAP2 specific and
no longer used anywhere.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-54-peter.maydell@linaro.org
|
|
The omap_dma4 device was only used in the OMAP2 SoC, which has
been removed.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-53-peter.maydell@linaro.org
|
|
The omap_l4 device is OMAP2 only, so we can remove it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-51-peter.maydell@linaro.org
|
|
The omap_dss device is OMAP2 only, and we are removing it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240903160751.4100218-50-peter.maydell@linaro.org
|
|
The omap_tap device is OMAP2 only, and we are removing it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-49-peter.maydell@linaro.org
|
|
The omap_mcspi device is used only in the OMAP2 SoC, which we
are removing.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240903160751.4100218-48-peter.maydell@linaro.org
|
|
Remove the omap_synctimer device, which is only in the OMAP2 SoC.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-46-peter.maydell@linaro.org
|
|
The omap_gptimer device is only in the OMAP2 SoC, which we
are removing.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-45-peter.maydell@linaro.org
|
|
The omap_gpmc device is only in OMAP2, which we are removing.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-44-peter.maydell@linaro.org
|
|
The omap_sdrc device is only in OMAP2, which we are removing.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-43-peter.maydell@linaro.org
|
|
Remove the OMAP2 specific code from omap_mmc.c.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-42-peter.maydell@linaro.org
|
|
Remove the OMAP2 specific code from omap_uart.c.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-40-peter.maydell@linaro.org
|
|
We've removed the OMAP2 SoC, so we can remove the OMAP2 GPIO
device. (The source file remains, as it also has the model of
the OMAP1 GPIO device.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-39-peter.maydell@linaro.org
|
|
The users of the OMAP2 SoC emulation have been removed, so we can
delete omap2.c.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-38-peter.maydell@linaro.org
|
|
Remove the MUSB USB2.0 OTG-compliant USB host controller
device model. This was only used by the tusb6010 USB
controller in the n800/n810 machines.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20240903160751.4100218-35-peter.maydell@linaro.org
|
|
The OneNAND devices were only used by n800/n810, so they
can be removed now.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20240903160751.4100218-33-peter.maydell@linaro.org
|
|
Remove the lm832x keyboard-and-pwm i2c device model. This
was only used by the n800 and n810 machines.
(Although this is an i2c device and so in theory available to create
on the command line, in practice it has an outbound IRQ line that the
machine model needs to wire up, and the only way to inject keys events
into it is to call the lm832x_key_event() function, so it isn't
in practice possible to use it separately from the n800/n810.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20240903160751.4100218-32-peter.maydell@linaro.org
|
|
Remove the tsc210x touchscreen controller device, which was
only used by the n800 and n810 and cheetah.
The uWireSlave struct is still used in omap1.c (at least for
compilation purposes -- nothing any longer calls omap_uwire_attach()
and so the struct's members will not be used at runtime), so
we move it into omap.h so we can delete tsc2xxx.h.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20240903160751.4100218-30-peter.maydell@linaro.org
|
|
Remove the tsc2005 touchscreen controller, which was only used
by the n800 and n810 machines.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20240903160751.4100218-29-peter.maydell@linaro.org
|
|
Remove the blizzard display device, which was only used with the
n800 and n810 machines.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20240903160751.4100218-28-peter.maydell@linaro.org
|
|
The devices in hw/misc/cbus.c were used only by the
now-removed nseries machine types, so they can be removed.
As this is the last use of the CONFIG_NSERIES define we
can remove that from KConfig now.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240903160751.4100218-27-peter.maydell@linaro.org
|
|
Remove the pxa2xx-specific interrupt controller device.
As this is the last user of the pxa.h header file and the
CONFIG_PXA2XX define we can remove those too.
This completes the removal of the pxa2xx specific code. We leave:
* pxa2xx_timer -- still used by the Collie board (strongarm)
* the definitions of the CPUs themselves in target/arm
(still usable by linux-user mode)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240903160751.4100218-23-peter.maydell@linaro.org
|
|
Remove the pxa2xx-specific GPIO device.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-22-peter.maydell@linaro.org
|
|
Remove the pxa2xx specific pcmcia device.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-21-peter.maydell@linaro.org
|
|
Remove the pxa2xx-specific pxa2xx_dma device.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-20-peter.maydell@linaro.org
|
|
Remove the pxa2xx-specific pxa2xx_lcd device.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240903160751.4100218-19-peter.maydell@linaro.org
|
|
Remove the pxa2xx-specific pxa2xx_keypad device.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-18-peter.maydell@linaro.org
|
|
Remove the pxa2xx-specific pxa2xx_mmci device.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-17-peter.maydell@linaro.org
|
|
All the callers of pxa270_init() and pxa255_init() have now been removed,
so we can remove pxa2xx.c. This also removes the only uses of a lot of
pxa2xx specific devices, which will be removed in subsequent commits.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-16-peter.maydell@linaro.org
|
|
The tc6393xb was used only by the XScale-based Zaurus machine types.
Now they have been removed we can remove this device too.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240903160751.4100218-7-peter.maydell@linaro.org
|
|
The Cadence GEM peripherals as configured for Zynq MPSoC and Versal
platforms have two priority queues with separate interrupt sources for
each. If the interrupt source for the second priority queue is not
connected, they work in polling mode only. This change connects the
second interrupt source for platforms where it is available. This patch
has been tested using the lwIP stack with a Xilinx-supplied driver from
their embeddedsw repository.
Signed-off-by: Kinsey Moore <kinsey.moore@oarcorp.com>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
nvme queue
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEUigzqnXi3OaiR2bATeGvMW1PDekFAmb7nokACgkQTeGvMW1P
# Del+2gf/YefiiYSL540C2QeYRwMFd6xFKKWYRRJoaARyLAoqInVdLiBql527Oov8
# rgDQq+D0XXP15CNDvfAZ59a36h1bAW79QCfKEUMSbP8GPeqb5pOSRfvYJSwnG1YX
# SC70vKLOrBhzxYiQYSOhLNKdbUM00OUyf2xibu0zk84UpkXtzSR4h/byFnQIHwEV
# /uUh4+cxY6eQK1Tfk/f66FEJLuJTchFOMVswYolDMezu2vJmToWHju/kpy2ugvaC
# +WEUEti8kL66/B399u1uwAad2OejC1Jf4qMFcFQJ9Cs9RV4HTC9byolceJE+1R0V
# CZt1SxvBNdK/ihs1iTjP7fInPqdYKw==
# =16tX
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 01 Oct 2024 08:02:33 BST
# gpg: using RSA key 522833AA75E2DCE6A24766C04DE1AF316D4F0DE9
# gpg: Good signature from "Klaus Jensen <its@irrelevant.dk>" [full]
# gpg: aka "Klaus Jensen <k.jensen@samsung.com>" [full]
# Primary key fingerprint: DDCA 4D9C 9EF9 31CC 3468 4272 63D5 6FC5 E55D A838
# Subkey fingerprint: 5228 33AA 75E2 DCE6 A247 66C0 4DE1 AF31 6D4F 0DE9
* tag 'pull-nvme-20241001' of https://gitlab.com/birkelund/qemu:
hw/nvme: add atomic write support
hw/nvme: add knob for CTRATT.MEM
hw/nvme: support CTRATT.MEM
hw/nvme: clear masked events from the aer queue
hw/nvme: report id controller metadata sgl support
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Indicate that 'MDTS and Size Limits Exclude Metadata (MEM)' in the
Controller Attributes (CTRATT) I/O Command Set Independent Identify
Controller Data Structure.
Signed-off-by: Arun Kumar <arun.kka@samsung.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
[k.jensen: updated commit message]
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
|
|
co_try_get_from_shres hasn't been used since it was added in
55fa54a789 ("co-shared-resource: protect with a mutex")
(Everyone uses the _locked version)
Remove it.
Signed-off-by: Dr. David Alan Gilbert <dave@treblig.org>
Message-Id: <20240918124220.27871-1-dave@treblig.org>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
|
|
aio_task_pool_empty has been unused since it was added in
6e9b225f73 ("block: introduce aio task pool")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <dave@treblig.org>
Message-Id: <20240917002007.330689-1-dave@treblig.org>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
|
|
In the context of backup fleecing, discarding the source will not work
when the fleecing image has a larger granularity than the one used for
block-copy operations (can happen if the backup target has smaller
cluster size), because cbw_co_pdiscard_snapshot() will align down the
discard requests and thus effectively ignore then.
To make @discard-source work in such a scenario, allow specifying the
minimum cluster size used for block-copy operations and thus in
particular also the granularity for discard requests to the source.
The type 'size' (corresponding to uint64_t in C) is used in QAPI to
rule out negative inputs and for consistency with already existing
@cluster-size parameters. Since block_copy_calculate_cluster_size()
uses int64_t for its result, a check that the input is not too large
is added in block_copy_state_new() before calling it. The calculation
in block_copy_calculate_cluster_size() is done in the target int64_t
type.
Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Acked-by: Markus Armbruster <armbru@redhat.com> (QAPI schema)
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Message-Id: <20240711120915.310243-2-f.ebner@proxmox.com>
[vsementsov: switch version to 9.2 in QAPI doc]
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
|
|
staging
* Convert more Avocado tests to the new functional test framework
* Clean up assert() statements, use g_assert_not_reached() when possible
* Improve output of the gitlab CI jobs
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmbz7xgRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbWm6A//eVn+tzyyKCX/xdXlf7XyVpezvRpTFPOS
# HyO0WMkCf2kGmu6qYKx/fDZg86opdQzPLH2gPkuVrGOMZ0Z2630DjH0jNih8lL9Q
# J1oRX5YlU92chlzNmq59WB/j9CKd91ILtOoaPBuZkDob57yGEYVzCPqetVvF7L2+
# +rbnccrNPumGJFt035fxUGiGfgsmp28MHQzDwQdyr38uGjyNlqvqidfC8Vj1qzqP
# B7HvhGB/vkF0eHaanMt2el/ZuLKf+qeCi//F/CiXGMYnuKXyShA/Db6xvMElw1jB
# aQdwphP71IO+cxjJLaNjDHKGFstArsM/E21qlaSTBi+FTmPiwVULpVTiBmWsjhOh
# /klpdgRHf0hL2MciYKyOWgjlTocx3rEKjCTe2U5tpta9fp9CrlgMQotjDZIbohGI
# ULNahrW3Zmg4EmXDApfhYMXsQsSgWas9QSkmxzJzDp0VC7tf2Oq7RxeySrlw9MCx
# OG2qQY+rNcJ3NnpATjfAJpT1kg/IahDOCNHfLEaj1u13XVQIthVADvHwy5WxbwRP
# mwp3V9e9sUoznkM2eV646lzmkMim/WdYBF0YpT7eBs80+GoXZ0thx9IqWmwzX/ox
# rndBczVN+RY6PydJP40yljdvS7ArRT73wHqL6yKHfDpvFc4/p5mxTWwLQ3yJbXbE
# T3I+wtgfBU8=
# =FH7b
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 25 Sep 2024 12:08:08 BST
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2024-09-25' of https://gitlab.com/thuth/qemu: (44 commits)
.gitlab-ci.d: Make separate collapsible log sections for build and test
.gitlab-ci.d: Split build and test in cross build job templates
scripts/checkpatch.pl: emit error when using assert(false)
tests/qtest: remove return after g_assert_not_reached()
qom: remove return after g_assert_not_reached()
qobject: remove return after g_assert_not_reached()
migration: remove return after g_assert_not_reached()
hw/ppc: remove return after g_assert_not_reached()
hw/pci: remove return after g_assert_not_reached()
hw/net: remove return after g_assert_not_reached()
hw/hyperv: remove return after g_assert_not_reached()
include/qemu: remove return after g_assert_not_reached()
tcg/loongarch64: remove break after g_assert_not_reached()
fpu: remove break after g_assert_not_reached()
target/riscv: remove break after g_assert_not_reached()
target/arm: remove break after g_assert_not_reached()
hw/tpm: remove break after g_assert_not_reached()
hw/scsi: remove break after g_assert_not_reached()
hw/net: remove break after g_assert_not_reached()
hw/acpi: remove break after g_assert_not_reached()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
staging
Hi,
"Host Memory Backends" and "Memory devices" queue ("mem"):
- Kconfig fix for virtio-based memory devices
- virtio-mem support for suspend+wake-up with plugged memory
- hostmem fix when specifying "merge=off"
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEG9nKrXNcTDpGDfzKTd4Q9wD/g1oFAmbyikMRHGRhdmlkQHJl
# ZGhhdC5jb20ACgkQTd4Q9wD/g1q6MBAAitNST73Shc+j327WvRLHQDkzkAlIYm+M
# E8NqtDiV11h7A0eNVu+5BkY/ejtY0Fduae3nxIkrHjK20eHHpiNPUp3hBNIhkKs3
# vlSaU8FLGdt58CteMGcLYsP2E32WNNTckaFGwGjDmyUEfk+Gug4r/rJAZXDfuuLV
# 083I0/MuUF+ozPA0c2MrOwhoBPerg3a5aflVpbgPwGNrT9BHMjo62Q5QzG3U7mxr
# HnlLAScSXsYg2z+d5XLXkKLAiZ4C7UN4vfUAOZwqkfs7IFUTtFO/ev6e7VZI747n
# XhAqOAKzLqPu7tBPZJIC6jwZAUIv5yM0/v5qhVvVVdu7H0ZMtSCXyvCVtnT25Rsn
# yiA+XvCOb7yQ3hRbBIi60IzjNYfWbvw+oTVIDfXkG35TeNf4ZdjWtAiUmw9s5U9Q
# z0tINsD7VlSkbh5h3PkFw1+xagIuJAVkp673HHTtQsg+xgYK2ur5jhhWJdJlnpzA
# 77CAu07UaqU39ssnC2zeGG1eNRA4uzjwQtREzqH2jMfkw/7UuUeXMF+v/fEuLn6w
# JneSMq/a0gmD42HNae0Y40cn2Akfj6+wFu1rW3djF8F6TeLUSssQhbQSHCMwGoOg
# qX7O/3SeSRzlnp3Zyx9Tr7s+BkMz0EGGDe17GQwTQUX2t5wR5iXoGqpKZgOBA8En
# 6uUIcjBUckc=
# =PExj
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 24 Sep 2024 10:45:39 BST
# gpg: using RSA key 1BD9CAAD735C4C3A460DFCCA4DDE10F700FF835A
# gpg: issuer "david@redhat.com"
# gpg: Good signature from "David Hildenbrand <david@redhat.com>" [marginal]
# gpg: aka "David Hildenbrand <davidhildenbrand@gmail.com>" [full]
# gpg: aka "David Hildenbrand <hildenbr@in.tum.de>" [unknown]
# Primary key fingerprint: 1BD9 CAAD 735C 4C3A 460D FCCA 4DDE 10F7 00FF 835A
* tag 'mem-2024-09-24' of https://github.com/davidhildenbrand/qemu:
hostmem: Apply merge property after the memory region is initialized
virtio-mem: Add support for suspend+wake-up with plugged memory
virtio-mem: Use new Resettable framework instead of LegacyReset
reset: Add RESET_TYPE_WAKEUP
reset: Use ResetType for qemu_devices_reset() and MachineClass::reset()
virtio: kconfig: memory devices are PCI only
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
trivial patches for 2024-09-20
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCgAdFiEEZKoqtTHVaQM2a/75gqpKJDselHgFAmbtJJUACgkQgqpKJDse
# lHjduhAAoZSS5+n2f8C4w4oboH9e5JSa6UAuVqGgju10SHm+VNgg2rQeeTD+J8uU
# vXL5lZKIb/jPNfHmsS5Q8CsuzV0M+A0wCcZJHaK5clVc1pZWMqwPPT4g4BUyjURi
# ptvQXWtTM049DDWZZXo+AHPQtko7f58EThn9fLBo/1yJe2UlBwhZwahKm3h66kkb
# aO9TI9UVt06DmXAvPBK9IfgFjYzkUJRQnLLmJDXiLx6YbuixX+J2PjKav5NtacRE
# KUArkLNfB00ouFYDOoLAnn/l+VWKIYkREeKbfQIj95BoejqAKsDztq35+oiRQbCZ
# CznKgXMIBNJCCYvKJXAoZeslE3n7Q0dlJ3RppClBjzHOiZTM46yeTofzzFot7SCN
# ERuV1WcTo53ooDvpvlP9S3d3P2i62eL5JPXgpN57Zuy7PTYQkcDq5wMTWlvm/OBy
# /hzcmIm1KHrprjf/+aNRdeCT27Rf1YD8EiTaabgtTZA4r00DrTpopAJs8ncKfbrA
# nxa8e7lNorx/PcBSJJA5iB1Q05y19eoLJcrCFMieFuG2s/oubm+bXrAuNjsSuJbS
# Lq50dIO6UIJSrV59w0CTBDrOuVXUv8/jbqRCUBMEzbXfz8mW9e8PXL+evVa8rKfk
# 6EMmDqC0/CmRrHT5uKkqTLtxcYGagdww3WIUB88UgARxydRPhu8=
# =++OB
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 20 Sep 2024 08:30:29 BST
# gpg: using RSA key 64AA2AB531D56903366BFEF982AA4A243B1E9478
# gpg: Good signature from "Michael Tokarev <mjt@debian.org>" [full]
# gpg: aka "Michael Tokarev <mjt@corpit.ru>" [full]
# gpg: aka "Michael Tokarev <mjt@tls.msk.ru>" [full]
# Primary key fingerprint: 9D8B E14E 3F2A 9DD7 9199 28F1 61AD 3D98 ECDF 2C8E
# Subkey fingerprint: 64AA 2AB5 31D5 6903 366B FEF9 82AA 4A24 3B1E 9478
* tag 'pull-trivial-patches' of https://gitlab.com/mjt0k/qemu: (22 commits)
license: Update deprecated SPDX tag GPL-2.0 to GPL-2.0-only
license: Update deprecated SPDX tag GPL-2.0+ to GPL-2.0-or-later
license: Update deprecated SPDX tag LGPL-2.0+ to LGPL-2.0-or-later
license: Simplify GPL-2.0-or-later license descriptions
tests/functional: Correct typo in test_netdev_ethtool.py SPDX tag
tests/bench: Rename test_akcipher_keys.inc -> test_akcipher_keys.c.inc
target/hexagon: Rename macros.inc -> macros.h.inc
tests/functional: Put the or1k_sim test into the slow category
tests/qemu-iotests/testenv: Use the "r2d" machine for sh4/sh4eb
tests/qemu-iotests/testenv: Use the "virt" machine for or1k
util/cutils: Remove unused qemu_get_exec_dir
hw/sysbus: Remove unused sysbus_mmio_unmap
envlist: Remove unused envlist_parse
hw/display: Fix mirrored output in dm163
hw/virtio/Kconfig: Include vhost-user-scmi only on arm targets
tests/unit: Really build pbkdf test on macOS
hw/loongarch/virt: Add description for virt machine type
hw/mips/jazz: fix typo in in-built NIC alias
ppc: fix incorrect spelling of PowerMac
linux-user/syscall.c: eliminate other explicit LFS usages
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
This patch is part of a series that moves towards a consistent use of
g_assert_not_reached() rather than an ad hoc mix of different
assertion mechanisms.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240919044641.386068-26-pierrick.bouvier@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
LegacyReset does not pass ResetType to the reset callback method, which
the new Resettable framework uses. Due to this, virtio-mem cannot use
the new RESET_TYPE_WAKEUP to skip the reset during wake-up from a
suspended state.
This patch adds overrides Resettable interface methods in VirtIOMEMClass
to use the new Resettable framework and replaces
qemu_[un]register_reset() calls with qemu_[un]register_resettable().
Message-ID: <20240904103722.946194-4-jmarcin@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Juraj Marcin <jmarcin@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
|
|
Some devices need to distinguish cold start reset from waking up from a
suspended state. This patch adds new value to the enum, and updates the
i386 wakeup method to use this new reset type.
Message-ID: <20240904103722.946194-3-jmarcin@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Juraj Marcin <jmarcin@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
|
|
Currently, both qemu_devices_reset() and MachineClass::reset() use
ShutdownCause for the reason of the reset. However, the Resettable
interface uses ResetState, so ShutdownCause needs to be translated to
ResetType somewhere. Translating it qemu_devices_reset() makes adding
new reset types harder, as they cannot always be matched to a single
ShutdownCause here, and devices may need to check the ResetType to
determine what to reset and if to reset at all.
This patch moves this translation up in the call stack to
qemu_system_reset() and updates all MachineClass children to use the
ResetType instead.
Message-ID: <20240904103722.946194-2-jmarcin@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Juraj Marcin <jmarcin@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
|
