aboutsummaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2020-10-01Merge remote-tracking branch 'remotes/jsnow-gitlab/tags/ide-pull-request' ↵Peter Maydell
into staging Pull request # gpg: Signature made Thu 01 Oct 2020 18:41:05 BST # gpg: using RSA key F9B7ABDBBCACDF95BE76CBD07DEF8106AAFC390E # gpg: Good signature from "John Snow (John Huston) <jsnow@redhat.com>" [full] # Primary key fingerprint: FAEB 9711 A12C F475 812F 18F2 88A9 064D 1835 61EB # Subkey fingerprint: F9B7 ABDB BCAC DF95 BE76 CBD0 7DEF 8106 AAFC 390E * remotes/jsnow-gitlab/tags/ide-pull-request: ide: cancel pending callbacks on SRST ide: clear interrupt on command write ide: remove magic constants from the device register ide: reorder set/get sector functions ide: model HOB correctly ide: don't tamper with the device register ide: rename cmd_write to ctrl_write hw/ide/ahci: Do not dma_memory_unmap(NULL) MAINTAINERS: Update my git address Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-01ide: remove magic constants from the device registerJohn Snow
(In QEMU, we call this the "select" register.) My memory isn't good enough to memorize what these magic runes do. Label them to prevent mixups from happening in the future. Side note: I assume it's safe to always set 0xA0 even though ATA2 claims these bits are reserved, because ATA3 immediately reinstated that these bits should be always on. ATA4 and subsequent specs only claim that the fields are obsolete, so I assume it's safe to leave these set and that it should work with the widest array of guests. Signed-off-by: John Snow <jsnow@redhat.com>
2020-10-01ide: model HOB correctlyJohn Snow
I have been staring at this FIXME for years and I never knew what it meant. I finally stumbled across it! When writing to the command registers, the old value is shifted into a HOB copy of the register and the new value is written into the primary register. When reading registers, the value retrieved is dependent on the HOB bit in the CONTROL register. By setting bit 7 (0x80) in CONTROL, any register read will, if it has one, yield the HOB value for that register instead. Our code has a problem: We were using bit 7 of the DEVICE register to model this. We use bus->cmd roughly as the control register already, as it stores the value from ide_ctrl_write. Lastly, all command register writes reset the HOB, so fix that, too. Signed-off-by: John Snow <jsnow@redhat.com>
2020-10-01ide: rename cmd_write to ctrl_writeJohn Snow
It's the Control register, part of the Control block -- Command is misleading here. Rename all related functions and constants. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-10-01Merge remote-tracking branch ↵Peter Maydell
'remotes/pmaydell/tags/pull-target-arm-20201001' into staging target-arm queue: * Make isar_feature_aa32_fp16_arith() handle M-profile * Fix SVE splice * Fix SVE LDR/STR * Remove ignore_memory_transaction_failures on the raspi2 * raspi: Various cleanup/refactoring # gpg: Signature made Thu 01 Oct 2020 15:46:47 BST # gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE # gpg: issuer "peter.maydell@linaro.org" # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate] # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * remotes/pmaydell/tags/pull-target-arm-20201001: hw/arm/raspi: Remove use of the 'version' value in the board code hw/arm/raspi: Use RaspiProcessorId to set the firmware load address hw/arm/raspi: Introduce RaspiProcessorId enum hw/arm/raspi: Use more specific machine names hw/arm/raspi: Avoid using TypeInfo::class_data pointer hw/arm/raspi: Move arm_boot_info structure to RaspiMachineState hw/arm/raspi: Load the firmware on the first core hw/arm/raspi: Display the board revision in the machine description hw/arm/raspi: Remove ignore_memory_transaction_failures on the raspi2 hw/arm/bcm2835: Add more unimplemented peripherals hw/arm/raspi: Define various blocks base addresses target/arm: Fix SVE splice target/arm: Fix sve ldr/str target/arm: Make isar_feature_aa32_fp16_arith() handle M-profile target/arm: Add ID register values for Cortex-M0 hw/intc/armv7m_nvic: Only show ID register values for Main Extension CPUs target/arm: Move id_pfr0, id_pfr1 into ARMISARegisters target/arm: Replace ARM_FEATURE_PXN with ID_MMFR0.VMSA check Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-01hw/arm/bcm2835: Add more unimplemented peripheralsPhilippe Mathieu-Daudé
The bcm2835-v3d is used since Linux 4.7, see commit 49ac67e0c39c ("ARM: bcm2835: Add VC4 to the device tree"), and the bcm2835-txp since Linux 4.19, see commit b7dd29b401f5 ("ARM: dts: bcm283x: Add Transposer block"). Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Message-id: 20200921034729.432931-3-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-01hw/arm/raspi: Define various blocks base addressesPhilippe Mathieu-Daudé
The Raspberry firmware is closed-source. While running it, it accesses various I/O registers. Logging these accesses as UNIMP (unimplemented) help to understand what the firmware is doing (ideally we want it able to boot a Linux kernel). Document various blocks we might use later. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Message-id: 20200921034729.432931-2-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-01Merge remote-tracking branch ↵Peter Maydell
'remotes/kraxel/tags/microvm-20200930-pull-request' into staging microvm: add pcie support. # gpg: Signature made Wed 30 Sep 2020 18:48:41 BST # gpg: using RSA key 4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full] # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full] # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full] # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/microvm-20200930-pull-request: tests/acpi: update expected data files acpi/gpex: no reason to use a method for _CRS tests/acpi: add microvm pcie test tests/acpi: factor out common microvm test setup tests/acpi: add empty tests/data/acpi/microvm/DSDT.pcie file tests/acpi: allow updates for expected data files microvm/pcie: add 64bit mmio window microvm: add pcie support microvm: add irq table arm: use acpi_dsdt_add_gpex acpi: add acpi_dsdt_add_gpex move MemMapEntry Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-30net/can: Add can_dlc2len and can_len2dlc for CAN FD.Jan Charvat
Signed-off-by: Jan Charvat <charvj10@fel.cvut.cz> Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz> Reviewed-by: Vikram Garhwal <fnu.vikram@xilinx.com> Message-Id: <0a2efc6ef9c458505952ed230e49ae25cad7f324.1600069689.git.pisa@cmp.felk.cvut.cz> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30net/can: Initial host SocketCan support for CAN FD.Jan Charvat
Signed-off-by: Jan Charvat <charvj10@fel.cvut.cz> Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz> Reviewed-by: Vikram Garhwal <fnu.vikram@xilinx.com> Message-Id: <41383d4eb3f35586c696a8e29c4dff4031a81338.1600069689.git.pisa@cmp.felk.cvut.cz> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30target/i386: always create kvmclock deviceVitaly Kuznetsov
QEMU's kvmclock device is only created when KVM PV feature bits for kvmclock (KVM_FEATURE_CLOCKSOURCE/KVM_FEATURE_CLOCKSOURCE2) are exposed to the guest. With 'kvm=off' cpu flag the device is not created and we don't call KVM_GET_CLOCK/KVM_SET_CLOCK upon migration. It was reported that without these call at least Hyper-V TSC page clocksouce (which can be enabled independently) gets broken after migration. Switch to creating kvmclock QEMU device unconditionally, it seems to always make sense to call KVM_GET_CLOCK/KVM_SET_CLOCK on migration. Use KVM_CAP_ADJUST_CLOCK check instead of CPUID feature bits. Reported-by: Antoine Damhet <antoine.damhet@blade-group.com> Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20200922151934.899555-1-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30typedefs: Restrict PCMachineState to 'hw/i386/pc.h'Philippe Mathieu-Daudé
The PCMachineState type is only used under hw/i386/. We don't need to forward-declare it for all architectures, restrict it to the X86 one. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200908155530.249806-7-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30hw/xen: Split x86-specific declaration from generic hardware onesPhilippe Mathieu-Daudé
xen_hvm_init() is restricted to the X86 architecture. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200908155530.249806-6-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30sysemu/xen: Add missing 'exec/cpu-common.h' header for ram_addr_t typePhilippe Mathieu-Daudé
As this header use the ram_addr_t type, it has to include "exec/cpu-common.h" to avoid odd errors such: include/sysemu/xen.h:35:44: error: unknown type name 'ram_addr_t'; did you mean 'in_addr_t'? 35 | static inline void xen_hvm_modified_memory(ram_addr_t start, ram_addr_t length) | ^~~~~~~~~~ | in_addr_t Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200908155530.249806-4-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30hw/i386/xen: Rename X86/PC specific function as xen_hvm_init_pc()Philippe Mathieu-Daudé
xen_hvm_init() is only meanful to initialize a X86/PC machine, rename it as xen_hvm_init_pc(). Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200908155530.249806-3-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30docs: Move object.h overview doc comment to qom.rstPaolo Bonzini
Move the whole contents of the overview doc comment from object.h to qom.rst. This makes the documentation source easier to read and edit, and also solves the backslash escaping issue at the typecasting macro examples. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20200910221526.10041-10-ehabkost@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30qom: Add code block markup to all code blocksEduardo Habkost
Convert all example/codelisting markup to Sphinx code-block. There are a few sections where backslashes at the end of lines break code formatting. A comment was added noting that this is an issue. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20200910221526.10041-8-ehabkost@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30qom: Indent existing code examplesEduardo Habkost
This indents existing code examples that are not indented yet, just to make future conversion to Sphinx markup easier to review. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20200910221526.10041-7-ehabkost@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30qom: Reformat section titles using Sphinx syntaxEduardo Habkost
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20200910221526.10041-6-ehabkost@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30qom: Add kernel-doc markup to introduction doc commentEduardo Habkost
Add DOC: section keyword to introduction doc comment, so it will be rendered by kernel-doc. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20200910221526.10041-5-ehabkost@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30qom: Use ``code`` Sphinx syntax where appropriateEduardo Habkost
Replace gtkdoc markup with Sphinx ``code`` syntax. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20200910221526.10041-4-ehabkost@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30qom: Use kernel-doc private/public tags in structsEduardo Habkost
Use kernel-doc syntax for indicating private and public struct fields. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20200910221526.10041-3-ehabkost@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30qom: Document all function parameters in doc commentsEduardo Habkost
kernel-doc requires all function parameters to be documented, so document them all. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20200910221526.10041-2-ehabkost@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30exec: Remove MemoryRegion::global_locking fieldPhilippe Mathieu-Daudé
Last uses of memory_region_clear_global_locking() have been removed in commit 7070e085d4 ("acpi: mark PMTIMER as unlocked") and commit 08565552f7 ("cputlb: Move NOTDIRTY handling from I/O path to TLB path"). Remove memory_region_clear_global_locking() and the now unused 'global_locking' field in MemoryRegion. Reported-by: Alexander Bulekov <alxndr@bu.edu> Suggested-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20200806150726.962-1-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30vl: relocate paths to data directoriesPaolo Bonzini
As an additional advantage, the logic is now unified between POSIX and Win32 systems. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30net: relocate paths to helpers and scriptsPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30cutils: introduce get_relocated_pathPaolo Bonzini
Add the function that will compute a relocated version of the directories in CONFIG_QEMU_*DIR and CONFIG_QEMU_*PATH. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30oslib: do not call g_strdup from qemu_get_exec_dirPaolo Bonzini
Just return the directory without requiring the caller to free it. This also removes a bogus check for NULL in os_find_datadir and module_load_one; g_strdup of a static variable cannot return NULL. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30scsi-generic: Fix HM-zoned device scanDmitry Fomichev
Several important steps during device scan depend on SCSI type of the device. For example, max_transfer property is only determined and assigned if the device has the type of TYPE_DISK. Host-managed ZBC disks retain most of the properties of regular SCSI drives, but they have their own SCSI device type, 0x14. This prevents the proper assignment of max_transfer property for HM-zoned devices in scsi-generic driver leading to I/O errors if the maximum i/o size calculated at the guest exceeds the host value. To fix this, define TYPE_ZBC to have the standard value from SCSI ZBC standard spec. Several scan steps that were previously done only for TYPE_DISK devices, are now performed for the SCSI devices having TYPE_ZBC too. Reported-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Message-Id: <20200811225122.17342-3-dmitry.fomichev@wdc.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30hw/char/serial: Make 'wakeup' property booleanPhilippe Mathieu-Daudé
Make the "wakeup" property introduced in commit 9826fd597df ("suspend: make serial ports wakeup the guest") a boolean. As we want to reuse the generic serial properties in the ISA model (next commit), expose this property. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200907015535.827885-6-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30hw/char/serial: Remove TYPE_SERIAL_IOPhilippe Mathieu-Daudé
TYPE_SERIAL_IO is a subset of TYPE_SERIAL_MM, and it is not used anymore. Remove it. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200907011538.818996-3-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30numa: drop support for '-numa node' (without memory specified)Igor Mammedov
it was deprecated since 4.1 commit 4bb4a2732e (numa: deprecate implict memory distribution between nodes) Users of existing VMs, wishing to preserve the same RAM distribution, should configure it explicitly using ``-numa node,memdev`` options. Current RAM distribution can be retrieved using HMP command `info numa` and if separate memory devices (pc|nv-dimm) are present use `info memory-device` and subtract device memory from output of `info numa`. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20200911084410.788171-2-imammedo@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30vhost-scsi: support inflight io trackLi Feng
Qemu will send GET_INFLIGHT_FD and SET_INFLIGH_FD to backend, and the backend setup the inflight memory to track the io. Change-Id: I805d6189996f7a1b44c65f0b12ef7473b1789510 Signed-off-by: Li Feng <fengli@smartx.com> Message-Id: <20200909122021.1055174-1-fengli@smartx.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30memory: Convert IOMMUMemoryRegionClass doc comment to kernel-docEduardo Habkost
Convert the existing documentation comments of IOMMUMemoryRegionClass to kernel-doc format so their contents will appear in the API reference at docs/devel/memory.html. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20200908201129.3407568-1-ehabkost@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30microvm: add pcie supportGerd Hoffmann
Uses the existing gpex device which is also used as pcie host bridge on arm/aarch64. For now only a 32bit mmio window and no ioport support. It is disabled by default, use "-machine microvm,pcie=on" to enable. ACPI support must be enabled too because the bus is declared in the DSDT table. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20200928104256.9241-6-kraxel@redhat.com
2020-09-30microvm: add irq tableGerd Hoffmann
Add a comment with a table listing the IRQs, both legacy pc and microvm side-by-side. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20200928104256.9241-5-kraxel@redhat.com
2020-09-30acpi: add acpi_dsdt_add_gpexGerd Hoffmann
Add helper function to generate dsdt aml code for the gpex pci host. Largely copied from arm/virt. Configuration is handled by passing a config struct instead of looked up from memory map. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20200928104256.9241-3-kraxel@redhat.com
2020-09-30move MemMapEntryGerd Hoffmann
It is defined twice already. Move to a common header file to remove duplication and make it available to everybody. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20200928104256.9241-2-kraxel@redhat.com
2020-09-29qapi: Extract ACPI commands to 'acpi.json'Philippe Mathieu-Daudé
Only qemu-system-FOO and qemu-storage-daemon provide QMP monitors, therefore such declarations and definitions are irrelevant for user-mode emulation. Extracting the ACPI commands to their own schema reduces the size of the qapi-misc* headers generated, and pulls less QAPI-generated code into user-mode. Suggested-by: Markus Armbruster <armbru@redhat.com> Acked-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Markus Armbruster <armbru@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200913195348.1064154-8-philmd@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-29qapi: Restrict device memory commands to machine codePhilippe Mathieu-Daudé
Only qemu-system-FOO and qemu-storage-daemon provide QMP monitors, therefore such declarations and definitions are irrelevant for user-mode emulation. Restricting the memory commands to machine.json pulls less QAPI-generated code into user-mode. Acked-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200913195348.1064154-7-philmd@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-29qapi: Restrict balloon-related commands to machine codePhilippe Mathieu-Daudé
Only qemu-system-FOO and qemu-storage-daemon provide QMP monitors, therefore such declarations and definitions are irrelevant for user-mode emulation. Restricting the balloon-related commands to machine.json pulls less QAPI-generated code into user-mode. Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Markus Armbruster <armbru@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200913195348.1064154-4-philmd@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-29qapi: Restrict LostTickPolicy enum to machine codePhilippe Mathieu-Daudé
Restricting LostTickPolicy to machine.json pulls slightly less QAPI-generated code into user-mode. Acked-by: Markus Armbruster <armbru@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200913195348.1064154-2-philmd@redhat.com> [Add rationale to commit message] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-29Merge remote-tracking branch 'remotes/kraxel/tags/vga-20200929-pull-request' ↵Peter Maydell
into staging virtio-vga: reset fix, bigendian fix. virtio-vga+spice: set monitor dimension via edid. # gpg: Signature made Tue 29 Sep 2020 10:57:01 BST # gpg: using RSA key 4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full] # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full] # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full] # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/vga-20200929-pull-request: ppc/pseries: enable big-endian-framebuffer quirk for bochs-display and virtio-vga virtio-vga: implement big-endian-framebuffer property virtio-gpu: set physical dimensions for EDID spice: get monitors physical dimension spice: remove the single monitor config logic ui: add getter for UIInfo edid: use physical dimensions if available edid: fix physical display size computation virtio-gpu-3d: fix abnormal display after a warm reboot Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-29virtio-gpu: set physical dimensions for EDIDMarc-André Lureau
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-id: 20200927145751.365446-7-marcandre.lureau@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-09-29spice: get monitors physical dimensionMarc-André Lureau
With upcoming Spice server version 0.14.4, the monitor configuration can contain additional fields for the monitor physical dimensions. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-id: 20200927145751.365446-6-marcandre.lureau@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-09-29ui: add getter for UIInfoMarc-André Lureau
The following patch is going to introduce extra fields / details to UIInfo. Add a getter and keep the current values, instead of memset(0) Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-id: 20200927145751.365446-4-marcandre.lureau@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-09-29edid: use physical dimensions if availableMarc-André Lureau
Replace dpi with width_mm/height_mm in qemu_edid_info. Use it when set (non-zero) to compute the DPI and generate the EDID. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-id: 20200927145751.365446-3-marcandre.lureau@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-09-29x86: acpi: introduce the PCI0.SMI0 ACPI deviceIgor Mammedov
When CPU hotplug with SMI has been negotiated, describe the SMI register block in the DSDT. Pass the ACPI name of the SMI control register to build_cpus_aml(), so that CPU_SCAN_METHOD can access the register in the next patch. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Message-Id: <20200923094650.1301166-9-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-09-29x86: ich9: expose "smi_negotiated_features" as a QOM propertyIgor Mammedov
Expose the "smi_negotiated_features" field of ICH9LPCState as a QOM property. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Message-Id: <20200923094650.1301166-7-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-09-29acpi: add aml_land() and aml_break() primitivesIgor Mammedov
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Message-Id: <20200923094650.1301166-5-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-23 19:33:24 +0000