aboutsummaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2023-01-06hw/riscv: microchip_pfsoc: Fix the number of interrupt sources of PLICBin Meng
Per chapter 6.5.2 in [1], the number of interupt sources including interrupt source 0 should be 187. [1] PolarFire SoC MSS TRM: https://ww1.microchip.com/downloads/aemDocuments/documents/FPGA/ProductDocuments/ReferenceManuals/PolarFire_SoC_FPGA_MSS_Technical_Reference_Manual_VC.pdf Fixes: 56f6e31e7b7e ("hw/riscv: Initial support for Microchip PolarFire SoC Icicle Kit board") Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Message-Id: <20221211030829.802437-10-bmeng@tinylab.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-01-06hw/intc: sifive_plic: Drop PLICMode_HBin Meng
H-mode has been removed since priv spec 1.10. Drop it. Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20221211030829.802437-6-bmeng@tinylab.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-01-06hw/{misc, riscv}: pfsoc: add system controller as unimplementedConor Dooley
The system controller on PolarFire SoC is access via a mailbox. The control registers for this mailbox lie in the "IOSCB" region & the interrupt is cleared via write to the "SYSREG" region. It also has a QSPI controller, usually connected to a flash chip, that is used for storing FPGA bitstreams and used for In-Application Programming (IAP). Linux has an implementation of the system controller, through which the hwrng is accessed, leading to load/store access faults. Add the QSPI as unimplemented and a very basic (effectively unimplemented) version of the system controller's mailbox. Rather than purely marking the regions as unimplemented, service the mailbox requests by reporting failures and raising the interrupt so a guest can better handle the lack of support. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20221117225518.4102575-4-conor@kernel.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-01-06hw/riscv: pfsoc: add missing FICs as unimplementedConor Dooley
The Fabric Interconnect Controllers provide interfaces between the FPGA fabric and the core complex. There are 5 FICs on PolarFire SoC, numbered 0 through 4. FIC2 is an AXI4 slave interface from the FPGA fabric and does not show up on the MSS memory map. FIC4 is dedicated to the User Crypto Processor and does not show up on the MSS memory map either. FIC 0, 1 & 3 do show up in the MSS memory map and neither FICs 0 or 1 are represented in QEMU, leading to load access violations while booting Linux for Icicle if PCIe is enabled as the root port is connected via either FIC 0 or 1. Acked-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Message-Id: <20221117225518.4102575-3-conor@kernel.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-01-06hw/misc: pfsoc: add fabric clocks to ioscbConor Dooley
On PolarFire SoC, some peripherals (eg the PCI root port) are clocked by "Clock Conditioning Circuitry" in the FPGA. The specific clock depends on the FPGA bitstream & can be locked to one particular {D,P}LL - in the Icicle Kit Reference Design v2022.09 or later this is/will be the case. Linux v6.1+ will have a driver for this peripheral and devicetrees that previously relied on "fixed-frequency" clock nodes have been switched over to clock-controller nodes. The IOSCB region is represented in QEMU, but the specific region of it that the CCCs occupy has not so v6.1-rcN kernels fail to boot in QEMU. Add the regions as unimplemented so that the status-quo in terms of boot is maintained. Acked-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Message-Id: <20221117225518.4102575-2-conor@kernel.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-01-06hw/riscv: virt: Remove the redundant ipi-id propertyAtish Patra
The imsic DT binding[1] has changed and no longer require an ipi-id. The latest IMSIC driver dynamically allocates ipi id if slow-ipi is not defined. Get rid of the unused dt property which may lead to confusion. [1] https://lore.kernel.org/lkml/20221111044207.1478350-5-apatel@ventanamicro.com/ Signed-off-by: Atish Patra <atishp@rivosinc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20221122080529.1692533-1-atishp@rivosinc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-01-06hw/riscv/opentitan: add aon_timer base unimplWilfred Mallawa
Adds the updated `aon_timer` base as an unimplemented device. This is used by TockOS, patch ensures the guest doesn't hit load faults. Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20221025043335.339815-3-wilfred.mallawa@opensource.wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-01-06hw/riscv/opentitan: bump opentitanWilfred Mallawa
This patch updates the OpenTitan model to match the specified register layout as per [1]. Which is also the latest commit of OpenTitan supported by TockOS. Note: Pinmux and Padctrl has been merged into Pinmux [2][3], this patch removes any references to Padctrl. Note: OpenTitan doc [2] has not yet specified much detail regarding this, except for a note that states `TODO: this section needs to be updated to reflect the pinmux/padctrl merger` [1] https://github.com/lowRISC/opentitan/blob/d072ac505f82152678d6e04be95c72b728a347b8/hw/top_earlgrey/sw/autogen/top_earlgrey_memory.h [2] https://docs.opentitan.org/hw/top_earlgrey/doc/design/ [3] https://docs.opentitan.org/hw/ip/pinmux/doc/#overview Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-Id: <20221025043335.339815-2-wilfred.mallawa@opensource.wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-01-06KVM: remove support for kernel-irqchip=offPaolo Bonzini
-machine kernel-irqchip=off is broken for many guest OSes; kernel-irqchip=split is the replacement that works, so remove the deprecated support for the former. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-01-06ide: Add 8-bit data modeLubomir Rintel
CompactFlash uses features 0x01 and 0x81 to enable/disable 8-bit data path. Implement them. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Message-Id: <20221130120238.706717-1-lkundrak@v3.sk> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-01-06hw: Reduce "qemu/accel.h" inclusionPhilippe Mathieu-Daudé
Move "qemu/accel.h" include from the heavily included "hw/boards.h" to hw/core/machine.c, the single file using the AccelState definition. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Fabiano Rosas <farosas@suse.de> Message-Id: <20221130135641.85328-3-philmd@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-01-06typedefs: Forward-declare AccelStatePhilippe Mathieu-Daudé
Forward-declare AccelState in "qemu/typedefs.h" so structures using a reference of it (like MachineState in "hw/boards.h") don't have to include "qemu/accel.h". Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Fabiano Rosas <farosas@suse.de> Message-Id: <20221130135641.85328-2-philmd@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-01-05tcg: Reorg function callsRichard Henderson
Pre-compute the function call layout for each helper at startup. Drop TCG_CALL_DUMMY_ARG, as we no longer need to leave gaps in the op->args[] array. This allows several places to stop checking for NULL TCGTemp, to which TCG_CALL_DUMMY_ARG mapped. For tcg_gen_callN, loop over the arguments once. Allocate the TCGOp for the call early but delay emitting it, collecting arguments first. This allows the argument processing loop to emit code for extensions and have them sequenced before the call. For tcg_reg_alloc_call, loop over the arguments in reverse order, which allows stack slots to be filled first naturally. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-01-05tcg: Use output_pref wrapper functionRichard Henderson
We will shortly have the possibility of more that two outputs, though only for calls (for which preferences are moot). Avoid direct references to op->output_pref[] when possible. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-01-05tcg: Vary the allocation size for TCGOpRichard Henderson
We have been allocating a worst case number of arguments to support calls. Instead, allow the size to vary. By default leave space for 4 args, to maximize reuse, but allow calls to increase the number of args to 32. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> [PMD: Split patch in two] Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20221218211832.73312-3-philmd@linaro.org>
2023-01-05tcg: Pass number of arguments to tcg_emit_op() / tcg_op_insert_*()Philippe Mathieu-Daudé
In order to have variable size allocated TCGOp, pass the number of arguments we use (and would allocate) up to tcg_op_alloc(). This alters tcg_emit_op(), tcg_op_insert_before() and tcg_op_insert_after() prototypes. In tcg_op_alloc() ensure the number of arguments is in range. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> [PMD: Extracted from bigger patch] Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20221218211832.73312-2-philmd@linaro.org>
2023-01-05tcg: Introduce tcg_type_sizeRichard Henderson
Add a helper function for computing the size of a type. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-01-05tcg: Move TCG_TYPE_COUNT outside enumRichard Henderson
The count is not itself an enumerator. Move it outside to prevent the compiler from considering it with -Wswitch-enum. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-01-05tcg: Add temp_subindex to TCGTempRichard Henderson
Record the location of a TCGTemp within a larger object. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-01-05tcg: Move TCG_{LOW,HIGH} to tcg-internal.hRichard Henderson
Move the error-generating fallback from tcg-op.c, and replace "_link_error" with modern QEMU_ERROR markup. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-01-05tcg: Introduce paired register allocationRichard Henderson
There are several instances where we need to be able to allocate a pair of registers to related inputs/outputs. Add 'p' and 'm' register constraints for this, in order to be able to allocate the even/odd register first or second. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-01-05i.MX7D: Connect IRQs to GPIO devices.Jean-Christophe Dubois
IRQs were not associated to the various GPIO devices inside i.MX7D. This patch brings the i.MX7D on par with i.MX6. Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Message-id: 20221226101418.415170-1-jcd@tribudubois.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-05i.MX6UL: Add a specific GPT timer instance for the i.MX6ULJean-Christophe Dubois
The i.MX6UL doesn't support CLK_HIGH ou CLK_HIGH_DIV clock source. Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-05i.MX7D: Connect GPT timers to IRQJean-Christophe Dubois
So far the GPT timers were unable to raise IRQs to the processor. Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-05hw/arm/smmu-common: Reduce smmu_inv_notifiers_mr() scopePhilippe Mathieu-Daudé
This function is not used anywhere outside this file, so we can make the function "static void". Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 20221216214924.4711-2-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-05hw/input/tsc2xxx: Constify set_transform()'s MouseTransformInfo argPhilippe Mathieu-Daudé
The pointed MouseTransformInfo structure is accessed read-only. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20221220142520.24094-2-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-05hw/timer/imx_epit: remove explicit fields cnt and freqAxel Heider
The CNT register is a read-only register. There is no need to store it's value, it can be calculated on demand. The calculated frequency is needed temporarily only. Note that this is a migration compatibility break for all boards types that use the EPIT peripheral. Signed-off-by: Axel Heider <axel.heider@hensoldt.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-05hw/timer/imx_epit: define SR_OCIFAxel Heider
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-05hw/timer/imx_epit: cleanup CR definesAxel Heider
remove unused defines, add needed defines Signed-off-by: Axel Heider <axel.heider@hensoldt.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-04qemu/main-loop: Introduce QEMU_IOTHREAD_LOCK_GUARDRichard Henderson
Create a wrapper for locking/unlocking the iothread lock. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-12-23qemu/xattr.h: Exclude <sys/xattr.h> for WindowsBin Meng
Windows does not have <sys/xattr.h>. Signed-off-by: Bin Meng <bin.meng@windriver.com> Message-Id: <20221219102022.2167736-2-bin.meng@windriver.com> Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
2022-12-21Merge tag 'pull-ppc-20221221' of https://gitlab.com/danielhb/qemu into stagingPeter Maydell
ppc patch queue for 2022-12-21: This queue contains a MAINTAINERS update, the implementation of the Freescale eSDHC, the introduction of the DEXCR/HDEXCR instructions and other assorted fixes (most of them for the e500 board). # gpg: Signature made Wed 21 Dec 2022 17:18:53 GMT # gpg: using EDDSA key 17EBFF9923D01800AF2838193CD9CA96DE033164 # gpg: issuer "danielhb413@gmail.com" # gpg: Good signature from "Daniel Henrique Barboza <danielhb413@gmail.com>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 17EB FF99 23D0 1800 AF28 3819 3CD9 CA96 DE03 3164 * tag 'pull-ppc-20221221' of https://gitlab.com/danielhb/qemu: target/ppc: Check DEXCR on hash{st, chk} instructions target/ppc: Implement the DEXCR and HDEXCR hw/ppc/e500: Move comment to more appropriate place hw/ppc/e500: Resolve variable shadowing hw/ppc/e500: Prefer local variable over qdev_get_machine() hw/ppc/virtex_ml507: Prefer local over global variable target/ppc/mmu_common: Fix table layout of "info tlb" HMP command target/ppc/mmu_common: Log which effective address had no TLB entry found hw/ppc/spapr: Reduce "vof.h" inclusion hw/ppc/vof: Do not include the full "cpu.h" target/ppc/kvm: Add missing "cpu.h" and "exec/hwaddr.h" hw/ppc/e500: Add Freescale eSDHC to e500plat hw/sd/sdhci: Support big endian SD host controller interfaces MAINTAINERS: downgrade PPC KVM/TCG CPUs and pSeries to 'Odd Fixes' Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-12-21hw/ppc/spapr: Reduce "vof.h" inclusionPhilippe Mathieu-Daudé
Currently objects including "hw/ppc/spapr.h" are forced to be target specific due to the inclusion of "vof.h" in "spapr.h". "spapr.h" only uses a Vof pointer, so doesn't require the structure declaration. The only place where Vof structure is accessed is in spapr.c, so include "vof.h" there, and forward declare the structure in "spapr.h". Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Message-Id: <20221213123550.39302-4-philmd@linaro.org> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2022-12-21hw/ppc/vof: Do not include the full "cpu.h"Philippe Mathieu-Daudé
"vof.h" doesn't need the full "cpu.h" to get the target_ulong definition, including "exec/cpu-defs.h" is enough. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Message-Id: <20221213123550.39302-3-philmd@linaro.org> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2022-12-21hw/sd/sdhci: Support big endian SD host controller interfacesPhilippe Mathieu-Daudé
Some SDHCI IP can be synthetized in various endianness: https://github.com/u-boot/u-boot/blob/v2021.04/doc/README.fsl-esdhc - CONFIG_SYS_FSL_ESDHC_BE ESDHC IP is in big-endian mode. Accessing ESDHC registers can be determined by ESDHC IP's endian mode or processor's endian mode. Our current implementation is little-endian. In order to support big endianness: - Rename current MemoryRegionOps as sdhci_mmio_le_ops ('le') - Add an 'endianness' property to SDHCIState (default little endian) - Set the 'io_ops' field in realize() after checking the property - Add the sdhci_mmio_be_ops (big-endian) MemoryRegionOps. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Message-Id: <20221101222934.52444-3-philmd@linaro.org> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2022-12-21Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu ↵Peter Maydell
into staging virtio,pc,pci: features, cleanups, fixes make TCO watchdog work by default part of generic vdpa support asid interrupt for vhost-vdpa added flex bus port DVSEC for cxl misc fixes, cleanups, documentation Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Wed 21 Dec 2022 12:32:36 GMT # gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469 # gpg: issuer "mst@redhat.com" # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full] # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full] # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (41 commits) contrib/vhost-user-blk: Replace lseek64 with lseek libvhost-user: Switch to unsigned int for inuse field in struct VuVirtq hw/virtio: Extract QMP related code virtio-qmp.c hw/virtio: Extract config read/write accessors to virtio-config-io.c hw/virtio: Constify qmp_virtio_feature_map_t[] hw/virtio: Guard and restrict scope of qmp_virtio_feature_map_t[] hw/virtio: Rename virtio_ss[] -> specific_virtio_ss[] hw/virtio: Add missing "hw/core/cpu.h" include hw/cxl/device: Add Flex Bus Port DVSEC hw/acpi: Rename tco.c -> ich9_tco.c acpi/tests/avocado/bits: add mformat as one of the dependencies docs/acpi/bits: document BITS_DEBUG environment variable pci: drop redundant PCIDeviceClass::is_bridge field remove DEC 21154 PCI bridge vhost: fix vq dirty bitmap syncing when vIOMMU is enabled acpi/tests/avocado/bits: add SPDX license identifiers for bios bits tests include/hw: attempt to document VirtIO feature variables vhost-user: send set log base message only once vdpa: always start CVQ in SVQ mode if possible vdpa: add shadow_data to vhost_vdpa ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-12-21hw/acpi: Rename tco.c -> ich9_tco.cPhilippe Mathieu-Daudé
tco.c contains the ICH9 implementation of its "total cost of ownership". Rename it accordingly to emphasis this is a part of the ICH9 model. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20221212105115.2113-1-philmd@linaro.org> Acked-by: Igor Mammedov <imammedo@redhat.com>
2022-12-21pci: drop redundant PCIDeviceClass::is_bridge fieldIgor Mammedov
and use cast to TYPE_PCI_BRIDGE instead. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20221129101341.185621-3-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Greg Kurz <groug@kaod.org>
2022-12-21remove DEC 21154 PCI bridgeIgor Mammedov
Code has not been used practically since its inception (2004) f2aa58c6f4a20 UniNorth PCI bridge support or maybe even earlier, but it was consuming contributors time as QEMU was being rewritten. Drop it for now. Whomever would like to actually use the thing, can make sure it actually works/reintroduce it back when there is a user. PS: I've stumbled upon this when replacing PCIDeviceClass::is_bridge field with QOM cast to PCI_BRIDGE type. Unused DEC 21154 was the only one trying to use the field with plain PCIDevice. It's not worth keeping the field around for the sake of the code that was commented out 'forever'. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20221129101341.185621-2-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-12-21include/hw: attempt to document VirtIO feature variablesAlex Bennée
We have a bunch of variables associated with the device and the vhost backend which are used inconsistently throughout the code base. Lets start trying to bring some order by agreeing what each variable is for. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Cc: Stefano Garzarella <sgarzare@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Stefan Hajnoczi <stefanha@gmail.com> Message-Id: <20221123152134.179929-2-alex.bennee@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-12-21vdpa: add shadow_data to vhost_vdpaEugenio Pérez
The memory listener that thells the device how to convert GPA to qemu's va is registered against CVQ vhost_vdpa. memory listener translations are always ASID 0, CVQ ones are ASID 1 if supported. Let's tell the listener if it needs to register them on iova tree or not. Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20221215113144.322011-12-eperezma@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-12-21vdpa: add asid parameter to vhost_vdpa_dma_map/unmapEugenio Pérez
So the caller can choose which ASID is destined. No need to update the batch functions as they will always be called from memory listener updates at the moment. Memory listener updates will always update ASID 0, as it's the passthrough ASID. All vhost devices's ASID are 0 at this moment. Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20221215113144.322011-10-eperezma@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-12-21vdpa: add vdpa-dev supportLongpeng
Supports vdpa-dev, we can use the deivce directly: -M microvm -m 512m -smp 2 -kernel ... -initrd ... -device \ vhost-vdpa-device,vhostdev=/dev/vhost-vdpa-x Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Longpeng <longpeng2@huawei.com> Message-Id: <20221215134944.2809-3-longpeng2@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-12-21virtio: get class_id and pci device id by the virtio idLongpeng
Add helpers to get the "Transitional PCI Device ID" and "class_id" of the device specified by the "Virtio Device ID". These helpers will be used to build the generic vDPA device later. Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Longpeng <longpeng2@huawei.com> Message-Id: <20221215134944.2809-2-longpeng2@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-12-21hw: Add compat machines for 8.0Cornelia Huck
Add 8.0 machine types for arm/i440fx/m68k/q35/s390x/spapr. Reviewed-by: Cédric Le Goater <clg@kaod.org> [ppc] Reviewed-by: Thomas Huth <thuth@redhat.com> [s390x] Reviewed-by: Greg Kurz <groug@kaod.org> [ppc] Signed-off-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20221212152145.124317-2-cohuck@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org>
2022-12-20accel/tcg: Move remainder of page locking to tb-maint.cRichard Henderson
The only thing that still touches PageDesc in translate-all.c are some locking routines related to tb-maint.c which have not yet been moved. Do so now. Move some code up in tb-maint.c as well, to untangle the maze of ifdefs, and allow a sensible final ordering. Move some declarations from exec/translate-all.h to internal.h, as they are only used within accel/tcg/. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-12-20accel/tcg: Use interval tree for TBs in user-only modeRichard Henderson
Begin weaning user-only away from PageDesc. Since, for user-only, all TB (and page) manipulation is done with a single mutex, and there is no virtual/physical discontinuity to split a TB across discontinuous pages, place all of the TBs into a single IntervalTree. This makes it trivial to find all of the TBs intersecting a range. Retain the existing PageDesc + linked list implementation for system mode. Move the portion of the implementation that overlaps the new user-only code behind the common ifdef. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-12-20util: Add interval-tree.cRichard Henderson
Copy and simplify the Linux kernel's interval_tree_generic.h, instantiating for uint64_t. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-12-19pci: Move HMP command from hw/pci/pcie_aer.c to pci-hmp-cmds.cMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20221201121133.3813857-10-armbru@redhat.com>
2022-12-18Merge tag 'pull-loongarch-20221215' of https://gitlab.com/gaosong/qemu into ↵Peter Maydell
staging Add cfi01 pflash device # gpg: Signature made Thu 15 Dec 2022 07:49:03 GMT # gpg: using RSA key B8FF1DA0D2FDCB2DA09C6C2C40A2FFF239263EDF # gpg: Good signature from "Song Gao <m17746591750@163.com>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: B8FF 1DA0 D2FD CB2D A09C 6C2C 40A2 FFF2 3926 3EDF * tag 'pull-loongarch-20221215' of https://gitlab.com/gaosong/qemu: hw/loongarch/virt: Add cfi01 pflash device Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-18 15:35:43 +0000