aboutsummaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2020-09-14hw/arm/npcm7xx: add board setup stub for CPU and UART clocksHavard Skinnemoen
When booting directly into a kernel, bypassing the boot loader, the CPU and UART clocks are not set up correctly. This makes the system appear very slow, and causes the initrd boot test to fail when optimization is off. The UART clock must run at 24 MHz. The default 25 MHz reference clock cannot achieve this, so switch to PLL2/2 @ 480 MHz, which works perfectly with the default /20 divider. The CPU clock should run at 800 MHz, so switch it to PLL1/2. PLL1 runs at 800 MHz by default, so we need to double the feedback divider as well to make it run at 1600 MHz (so PLL1/2 runs at 800 MHz). We don't bother checking for PLL lock because we know our emulated PLLs lock instantly. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Message-id: 20200911052101.2602693-13-hskinnemoen@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-14hw/ssi: NPCM7xx Flash Interface Unit device modelHavard Skinnemoen
This implements a device model for the NPCM7xx SPI flash controller. Direct reads and writes, and user-mode transactions have been tested in various modes. Protection features are not implemented yet. All the FIU instances are available in the SoC's address space, regardless of whether or not they're connected to actual flash chips. Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Message-id: 20200911052101.2602693-11-hskinnemoen@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-14hw/mem: Stubbed out NPCM7xx Memory Controller modelHavard Skinnemoen
This just implements the bare minimum to cause the boot block to skip memory initialization. Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Message-id: 20200911052101.2602693-10-hskinnemoen@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-14hw/nvram: NPCM7xx OTP device modelHavard Skinnemoen
This supports reading and writing OTP fuses and keys. Only fuse reading has been tested. Protection is not implemented. Reviewed-by: Avi Fishman <avi.fishman@nuvoton.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Message-id: 20200911052101.2602693-9-hskinnemoen@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-14hw/arm: Add two NPCM7xx-based machinesHavard Skinnemoen
This adds two new machines, both supported by OpenBMC: - npcm750-evb: Nuvoton NPCM750 Evaluation Board. - quanta-gsj: A board with a NPCM730 chip. They rely on the NPCM7xx SoC device to do the heavy lifting. They are almost completely identical at the moment, apart from the SoC type, which currently only changes the reset contents of one register (GCR.MDLR), but they might grow apart a bit more as more functionality is added. Both machines can boot the Linux kernel into /bin/sh. Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Message-id: 20200911052101.2602693-6-hskinnemoen@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-14hw/arm: Add NPCM730 and NPCM750 SoC modelsHavard Skinnemoen
The Nuvoton NPCM7xx SoC family are used to implement Baseboard Management Controllers in servers. While the family includes four SoCs, this patch implements limited support for two of them: NPCM730 (targeted for Data Center applications) and NPCM750 (targeted for Enterprise applications). This patch includes little more than the bare minimum needed to boot a Linux kernel built with NPCM7xx support in direct-kernel mode: - Two Cortex-A9 CPU cores with built-in periperhals. - Global Configuration Registers. - Clock Management. - 3 Timer Modules with 5 timers each. - 4 serial ports. The chips themselves have a lot more features, some of which will be added to the model at a later stage. Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Message-id: 20200911052101.2602693-5-hskinnemoen@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-14hw/timer: Add NPCM7xx Timer device modelHavard Skinnemoen
The NPCM730 and NPCM750 SoCs have three timer modules each holding five timers and some shared registers (e.g. interrupt status). Each timer runs at 25 MHz divided by a prescaler, and counts down from a configurable initial value to zero. When zero is reached, the interrupt flag for the timer is set, and the timer is disabled (one-shot mode) or reloaded from its initial value (periodic mode). This implementation is sufficient to boot a Linux kernel configured for NPCM750. Note that the kernel does not seem to actually turn on the interrupts. Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alexander Bulekov <alxndr@bu.edu> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Message-id: 20200911052101.2602693-4-hskinnemoen@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-14hw/misc: Add NPCM7xx Clock Controller device modelHavard Skinnemoen
Enough functionality to boot the Linux kernel has been implemented. This includes: - Correct power-on reset values so the various clock rates can be accurately calculated. - Clock enables stick around when written. In addition, a best effort attempt to implement SECCNT and CNTR25M was made even though I don't think the kernel needs them. Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Message-id: 20200911052101.2602693-3-hskinnemoen@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-14hw/misc: Add NPCM7xx System Global Control Registers device modelHavard Skinnemoen
Implement a device model for the System Global Control Registers in the NPCM730 and NPCM750 BMC SoCs. This is primarily used to enable SMP boot (the boot ROM spins reading the SCRPAD register) and DDR memory initialization; other registers are best effort for now. The reset values of the MDLR and PWRON registers are determined by the SoC variant (730 vs 750) and board straps respectively. Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Message-id: 20200911052101.2602693-2-hskinnemoen@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-13Merge remote-tracking branch ↵Peter Maydell
'remotes/alistair/tags/pull-riscv-to-apply-20200910' into staging This PR includes multiple fixes and features for RISC-V: - Fixes a bug in printing trap causes - Allows 16-bit writes to the SiFive test device. This fixes the failure to reboot the RISC-V virt machine - Support for the Microchip PolarFire SoC and Icicle Kit - A reafactor of RISC-V code out of hw/riscv # gpg: Signature made Thu 10 Sep 2020 19:08:06 BST # gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054 # gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full] # Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054 * remotes/alistair/tags/pull-riscv-to-apply-20200910: (30 commits) hw/riscv: Sort the Kconfig options in alphabetical order hw/riscv: Drop CONFIG_SIFIVE hw/riscv: Always build riscv_hart.c hw/riscv: Move sifive_test model to hw/misc hw/riscv: Move sifive_uart model to hw/char hw/riscv: Move riscv_htif model to hw/char hw/riscv: Move sifive_plic model to hw/intc hw/riscv: Move sifive_clint model to hw/intc hw/riscv: Move sifive_gpio model to hw/gpio hw/riscv: Move sifive_u_otp model to hw/misc hw/riscv: Move sifive_u_prci model to hw/misc hw/riscv: Move sifive_e_prci model to hw/misc hw/riscv: sifive_u: Connect a DMA controller hw/riscv: clint: Avoid using hard-coded timebase frequency hw/riscv: microchip_pfsoc: Hook GPIO controllers hw/riscv: microchip_pfsoc: Connect 2 Cadence GEMs hw/arm: xlnx: Set all boards' GEM 'phy-addr' property value to 23 hw/net: cadence_gem: Add a new 'phy-addr' property hw/riscv: microchip_pfsoc: Connect a DMA controller hw/dma: Add SiFive platform DMA controller emulation ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # hw/riscv/trace-events
2020-09-12Merge remote-tracking branch ↵Peter Maydell
'remotes/berrange-gitlab/tags/crypt-perf-pull-request' into staging Improve performance of crypto cipher subsystem # gpg: Signature made Thu 10 Sep 2020 11:05:18 BST # gpg: using RSA key DAF3A6FDB26B62912D0E8E3FBE86EBB415104FDF # gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" [full] # gpg: aka "Daniel P. Berrange <berrange@redhat.com>" [full] # Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF * remotes/berrange-gitlab/tags/crypt-perf-pull-request: crypto/gcrypt: Split QCryptoCipherGcrypt into subclasses crypto/nettle: Split QCryptoCipherNettle into subclasses crypto/builtin: Split QCryptoCipherBuiltin into subclasses crypto/builtin: Split and simplify AES_encrypt_cbc crypto/builtin: Move AES_cbc_encrypt into cipher-builtin.inc.c crypto/builtin: Merge qcrypto_cipher_aes_{ecb,xts}_{en,de}crypt crypto/builtin: Remove odd-sized AES block handling crypto: Constify cipher data tables crypto: Move cipher->driver init to qcrypto_*_cipher_ctx_new crypto: Allocate QCryptoCipher with the subclass crypto: Use the correct const type for driver crypto: Move QCryptoCipherDriver typedef to crypto/cipher.h crypto/nettle: Fix xts_encrypt arguments crypto: Remove redundant includes crypto: Rename cipher include files to .c.inc crypto: Assume blocksize is a power of 2 tests: fix output message formatting for crypto benchmarks Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-12Merge remote-tracking branch ↵Peter Maydell
'remotes/vivier2/tags/trivial-branch-for-5.2-pull-request' into staging trivial patches pull request 20200911 # gpg: Signature made Fri 11 Sep 2020 20:32:27 BST # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier2/tags/trivial-branch-for-5.2-pull-request: target/i386/kvm: Add missing fallthrough comment util/hexdump: Reorder qemu_hexdump() arguments util/hexdump: Convert to take a void pointer argument hw/arm/pxa2xx: Add missing fallthrough comment target/i386/kvm: Rename host_tsx_blacklisted() as host_tsx_broken() test-vmstate: remove unnecessary code in match_interval_mapping_node hw: hyperv: vmbus: Fix 32bit compilation kconfig: fix comment referring to old Makefiles meson.build: tweak sdl-image error message hw/net/e1000e: Remove duplicated write handler for FLSWDATA register hw/net/e1000e: Remove overwritten read handler for STATUS register Makefile: Skip the meson subdir in cscope/TAGS/ctags Makefile: Drop extra phony cscope hw/gpio/max7310: Replace disabled printf() by qemu_log_mask(UNIMP) hw/gpio/omap_gpio: Replace fprintf() by qemu_log_mask(GUEST_ERROR) hw/acpi/tco: Remove unused definitions hw/isa/isa-bus: Replace hw_error() by assert() hw/mips/fuloong2e: Convert pointless error message to an assert() Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # net/colo-compare.c
2020-09-11util/hexdump: Reorder qemu_hexdump() argumentsPhilippe Mathieu-Daudé
qemu_hexdump()'s pointer to the buffer and length of the buffer are closely related arguments but are widely separated in the argument list order (also, the format of <stdio.h> function prototypes is usually to have the FILE* argument coming first). Reorder the arguments as "fp, prefix, buf, size" which is more logical. Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Message-Id: <20200822180950.1343963-3-f4bug@amsat.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-09-11util/hexdump: Convert to take a void pointer argumentPhilippe Mathieu-Daudé
Most uses of qemu_hexdump() do not take an array of char as input, forcing use of cast. Since we can use this helper to dump any kind of buffer, use a pointer to void argument instead. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Li Qiang <liq3ea@gmail.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Message-Id: <20200822180950.1343963-2-f4bug@amsat.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-09-11Merge remote-tracking branch ↵Peter Maydell
'remotes/ehabkost/tags/machine-next-pull-request' into staging QOM boilerplate cleanup Documentation build fix: * memory: Remove kernel-doc comment marker (Eduardo Habkost) QOM cleanups: * Rename QOM macros for consistency between TYPE_* and type checking constants (Eduardo Habkost) QOM new macros: * OBJECT_DECLARE_* and OBJECT_DEFINE_* macros (Daniel P. Berrangé) * DECLARE_*_CHECKER macros (Eduardo Habkost) Automated QOM boilerplate changes: * Automated changes to use DECLARE_*_CHECKER (Eduardo Habkost * Automated changes to use OBJECT_DECLARE* (Eduardo Habkost) # gpg: Signature made Thu 10 Sep 2020 19:17:49 BST # gpg: using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6 # gpg: issuer "ehabkost@redhat.com" # gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full] # Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6 * remotes/ehabkost/tags/machine-next-pull-request: (33 commits) virtio-vga: Use typedef name for instance_size vhost-user-vga: Use typedef name for instance_size xilinx_axienet: Use typedef name for instance_size lpc_ich9: Use typedef name for instance_size omap_intc: Use typedef name for instance_size xilinx_axidma: Use typedef name for instance_size tusb6010: Rename TUSB to TUSB6010 pc87312: Rename TYPE_PC87312_SUPERIO to TYPE_PC87312 vfio: Rename PCI_VFIO to VFIO_PCI usb: Rename USB_SERIAL_DEV to USB_SERIAL sabre: Rename SABRE_DEVICE to SABRE rs6000_mc: Rename RS6000MC_DEVICE to RS6000MC filter-rewriter: Rename FILTER_COLO_REWRITER to FILTER_REWRITER esp: Rename ESP_STATE to ESP ahci: Rename ICH_AHCI to ICH9_AHCI vmgenid: Rename VMGENID_DEVICE to TYPE_VMGENID vfio: Rename VFIO_AP_DEVICE_TYPE to TYPE_VFIO_AP_DEVICE dev-smartcard-reader: Rename CCID_DEV_NAME to TYPE_USB_CCID_DEV ap-device: Rename AP_DEVICE_TYPE to TYPE_AP_DEVICE gpex: Fix type checking function name ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-11Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into stagingPeter Maydell
Block layer patches: - qemu-img create: Fail gracefully when backing file is an empty string - Fixes related to filter block nodes ("Deal with filters" series) - block/nvme: Various cleanups required to use multiple queues - block/nvme: Use NvmeBar structure from "block/nvme.h" - file-win32: Fix "locking" option - iotests: Allow running from different directory # gpg: Signature made Thu 10 Sep 2020 10:11:19 BST # gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6 # gpg: issuer "kwolf@redhat.com" # gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full] # Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6 * remotes/kevin/tags/for-upstream: (65 commits) block/qcow2-cluster: Add missing "fallthrough" annotation block/nvme: Pair doorbell registers block/nvme: Use generic NvmeBar structure block/nvme: Group controller registers in NVMeRegs structure file-win32: Fix "locking" option iotests: Allow running from different directory iotests: Test committing to overridden backing iotests: Add test for commit in sub directory iotests: Add filter mirror test cases iotests: Add filter commit test cases iotests: Let complete_and_wait() work with commit iotests: Test that qcow2's data-file is flushed block: Leave BDS.backing_{file,format} constant block: Inline bdrv_co_block_status_from_*() blockdev: Fix active commit choice block: Drop backing_bs() qemu-img: Use child access functions nbd: Use CAF when looking for dirty bitmap commit: Deal with filters backup: Deal with filters ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-10crypto/builtin: Move AES_cbc_encrypt into cipher-builtin.inc.cRichard Henderson
By making the function private, we will be able to make further simplifications. Re-indent the migrated code and fix the missing braces for CODING_STYLE. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-09-10crypto: Allocate QCryptoCipher with the subclassRichard Henderson
Merge the allocation of "opaque" into the allocation of "cipher". This is step one in reducing the indirection in these classes. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-09-10crypto: Use the correct const type for driverRichard Henderson
This allows the in memory structures to be read-only. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-09-10crypto: Move QCryptoCipherDriver typedef to crypto/cipher.hRichard Henderson
Allow the use in QCryptoCipher to be properly typed with the opaque struct pointer. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-09-09hw/riscv: Move sifive_test model to hw/miscBin Meng
This is an effort to clean up the hw/riscv directory. Ideally it should only contain the RISC-V SoC / machine codes plus generic codes. Let's move sifive_test model to hw/misc directory. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1599129623-68957-10-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09hw/riscv: Move sifive_uart model to hw/charBin Meng
This is an effort to clean up the hw/riscv directory. Ideally it should only contain the RISC-V SoC / machine codes plus generic codes. Let's move sifive_uart model to hw/char directory. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1599129623-68957-9-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09hw/riscv: Move riscv_htif model to hw/charBin Meng
This is an effort to clean up the hw/riscv directory. Ideally it should only contain the RISC-V SoC / machine codes plus generic codes. Let's move riscv_htif model to hw/char directory. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1599129623-68957-8-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09hw/riscv: Move sifive_plic model to hw/intcBin Meng
This is an effort to clean up the hw/riscv directory. Ideally it should only contain the RISC-V SoC / machine codes plus generic codes. Let's move sifive_plic model to hw/intc directory. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1599129623-68957-7-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09hw/riscv: Move sifive_clint model to hw/intcBin Meng
This is an effort to clean up the hw/riscv directory. Ideally it should only contain the RISC-V SoC / machine codes plus generic codes. Let's move sifive_clint model to hw/intc directory. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1599129623-68957-6-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09hw/riscv: Move sifive_gpio model to hw/gpioBin Meng
This is an effort to clean up the hw/riscv directory. Ideally it should only contain the RISC-V SoC / machine codes plus generic codes. Let's move sifive_gpio model to hw/gpio directory. Note this also removes the trace-events in the hw/riscv directory, since gpio is the only supported trace target in that directory. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1599129623-68957-5-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09hw/riscv: Move sifive_u_otp model to hw/miscBin Meng
This is an effort to clean up the hw/riscv directory. Ideally it should only contain the RISC-V SoC / machine codes plus generic codes. Let's move sifive_u_otp model to hw/misc directory. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1599129623-68957-4-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09hw/riscv: Move sifive_u_prci model to hw/miscBin Meng
This is an effort to clean up the hw/riscv directory. Ideally it should only contain the RISC-V SoC / machine codes plus generic codes. Let's move sifive_u_prci model to hw/misc directory. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1599129623-68957-3-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09hw/riscv: Move sifive_e_prci model to hw/miscBin Meng
This is an effort to clean up the hw/riscv directory. Ideally it should only contain the RISC-V SoC / machine codes plus generic codes. Let's move sifive_e_prci model to hw/misc directory. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1599129623-68957-2-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09hw/riscv: sifive_u: Connect a DMA controllerBin Meng
SiFive FU540 SoC integrates a platform DMA controller with 4 DMA channels. This connects the exsiting SiFive PDMA model to the SoC, and adds its device tree data as well. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1598924352-89526-17-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09hw/riscv: clint: Avoid using hard-coded timebase frequencyBin Meng
At present the CLINT timestamp is using a hard-coded timebase frequency value SIFIVE_CLINT_TIMEBASE_FREQ. This might not be true for all boards. Add a new 'timebase-freq' property to the CLINT device, and update various functions to accept this as a parameter. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1598924352-89526-16-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09hw/riscv: microchip_pfsoc: Hook GPIO controllersBin Meng
Microchip PolarFire SoC integrates 3 GPIOs controllers. It seems enough to create unimplemented devices to cover their register spaces at this point. With this commit, QEMU can boot to U-Boot (2nd stage bootloader) all the way to the Linux shell login prompt, with a modified HSS (1st stage bootloader). For detailed instructions on how to create images for the Icicle Kit board, please check QEMU RISC-V WiKi page at: https://wiki.qemu.org/Documentation/Platforms/RISCV Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <1598924352-89526-15-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09hw/riscv: microchip_pfsoc: Connect 2 Cadence GEMsBin Meng
Microchip PolarFire SoC integrates 2 Candence GEMs to provide IEEE 802.3 standard-compliant 10/100/1000 Mbps ethernet interface. On the Icicle Kit board, GEM0 connects to a PHY at address 8 while GEM1 connects to a PHY at address 9. The 2nd stage bootloader (U-Boot) is using GEM1 by default, so we must specify 2 '-nic' options from the command line in order to get a working ethernet. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <1598924352-89526-14-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09hw/net: cadence_gem: Add a new 'phy-addr' propertyBin Meng
At present the PHY address of the PHY connected to GEM is hard-coded to either 23 (BOARD_PHY_ADDRESS) or 0. This might not be the case for all boards. Add a new 'phy-addr' property so that board can specify the PHY address for each GEM instance. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1598924352-89526-12-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09hw/riscv: microchip_pfsoc: Connect a DMA controllerBin Meng
On the Icicle Kit board, the HSS firmware utilizes the on-chip DMA controller to move the 2nd stage bootloader in the system memory. Let's connect a DMA controller to Microchip PolarFire SoC. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1598924352-89526-11-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09hw/dma: Add SiFive platform DMA controller emulationBin Meng
Microchip PolarFire SoC integrates a DMA engine that supports: * Independent concurrent DMA transfers using 4 DMA channels * Generation of interrupts on various conditions during execution which is actually an IP reused from the SiFive FU540 chip. This creates a model to support both polling and interrupt modes. Signed-off-by: Bin Meng <bin.meng@windriver.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1598924352-89526-10-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09hw/riscv: microchip_pfsoc: Connect a Cadence SDHCI controller and an SD cardBin Meng
Microchip PolarFire SoC integrates one Cadence SDHCI controller. On the Icicle Kit board, one eMMC chip and an external SD card connect to this controller depending on different configuration. As QEMU does not support eMMC yet, we just emulate the SD card configuration. To test this, the Hart Software Services (HSS) should choose the SD card configuration: $ cp boards/icicle-kit-es/def_config.sdcard .config $ make BOARD=icicle-kit-es The SD card image can be built from the Yocto BSP at: https://github.com/polarfire-soc/meta-polarfire-soc-yocto-bsp Note the generated SD card image should be resized before use: $ qemu-img resize /path/to/sdcard.img 4G Launch QEMU with the following command: $ qemu-system-riscv64 -nographic -M microchip-icicle-kit -sd sdcard.img Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1598924352-89526-9-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09hw/sd: Add Cadence SDHCI emulationBin Meng
Cadence SD/SDIO/eMMC Host Controller (SD4HC) is an SDHCI compatible controller. The SDHCI compatible registers start from offset 0x200, which are called Slot Register Set (SRS) in its datasheet. This creates a Cadence SDHCI model built on top of the existing generic SDHCI model. Cadence specific Host Register Set (HRS) is implemented to make guest software happy. Signed-off-by: Bin Meng <bin.meng@windriver.com> Acked-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1598924352-89526-8-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09hw/riscv: microchip_pfsoc: Connect 5 MMUARTsBin Meng
Microchip PolarFire SoC has 5 MMUARTs, and the Icicle Kit board wires 4 of them out. Let's connect all 5 MMUARTs. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1598924352-89526-7-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09hw/char: Add Microchip PolarFire SoC MMUART emulationBin Meng
Microchip PolarFire SoC MMUART is ns16550 compatible, with some additional registers. Create a simple MMUART model built on top of the existing ns16550 model. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1598924352-89526-6-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09hw/riscv: Initial support for Microchip PolarFire SoC Icicle Kit boardBin Meng
This is an initial support for Microchip PolarFire SoC Icicle Kit. The Icicle Kit board integrates a PolarFire SoC, with one SiFive's E51 plus four U54 cores and many on-chip peripherals and an FPGA. For more details about Microchip PolarFire Soc, please see: https://www.microsemi.com/product-directory/soc-fpgas/5498-polarfire-soc-fpga Unlike SiFive FU540, the RISC-V core resect vector is at 0x20220000. The following perepherals are created as an unimplemented device: - Bus Error Uint 0/1/2/3/4 - L2 cache controller - SYSREG - MPUCFG - IOSCBCFG More devices will be added later. The BIOS image used by this machine is hss.bin, aka Hart Software Services, which can be built from: https://github.com/polarfire-soc/hart-software-services To launch this machine: $ qemu-system-riscv64 -nographic -M microchip-icicle-kit The memory is set to 1 GiB by default to match the hardware. A sanity check on ram size is performed in the machine init routine to prompt user to increase the RAM size to > 1 GiB when less than 1 GiB ram is detected. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1598924352-89526-5-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09hw/riscv: hart: Add a new 'resetvec' propertyBin Meng
RISC-V machines do not instantiate RISC-V CPUs directly, instead they do that via the hart array. Add a new property for the reset vector address to allow the value to be passed to the CPU, before CPU is realized. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <1598924352-89526-3-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09pc87312: Rename TYPE_PC87312_SUPERIO to TYPE_PC87312Eduardo Habkost
This will make the type name constant consistent with the name of the type checking macro. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Hervé Poussineau <hpoussin@reactos.org> Message-Id: <20200902224311.1321159-21-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-09sabre: Rename SABRE_DEVICE to SABREEduardo Habkost
Make the type checking macro name consistent with the TYPE_* constant. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20200902224311.1321159-49-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-09esp: Rename ESP_STATE to ESPEduardo Habkost
Make the type checking macro name consistent with the TYPE_* constant. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Hervé Poussineau <hpoussin@reactos.org> Message-Id: <20200902224311.1321159-40-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-09ahci: Rename ICH_AHCI to ICH9_AHCIEduardo Habkost
Make the type checking macro name consistent with the TYPE_* constant. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200902224311.1321159-33-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-09vmgenid: Rename VMGENID_DEVICE to TYPE_VMGENIDEduardo Habkost
This will make the type name constant consistent with the name of the type checking macro. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200902224311.1321159-11-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-09ap-device: Rename AP_DEVICE_TYPE to TYPE_AP_DEVICEEduardo Habkost
This will make the type name constant consistent with the name of the type checking macro. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20200902224311.1321159-6-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-09gpex: Fix type checking function nameEduardo Habkost
This looks like a copy/paste mistake: the instance type checking macro for TYPE_GPEX_ROOT_DEVICE was named MCH_PCI_DEVICE. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200902224311.1321159-2-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-09Use OBJECT_DECLARE_SIMPLE_TYPE when possibleEduardo Habkost
Generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=ObjectDeclareType $(git grep -l '' -- '*.[ch]') Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20200831210740.126168-19-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-04 13:45:55 +0000