aboutsummaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2021-02-16pc: add parser for OVMF reset blockJames Bottomley
OVMF is developing a mechanism for depositing a GUIDed table just below the known location of the reset vector. The table goes backwards in memory so all entries are of the form <data>|len|<GUID> Where <data> is arbtrary size and type, <len> is a uint16_t and describes the entire length of the entry from the beginning of the data to the end of the guid. The foot of the table is of this form and <len> for this case describes the entire size of the table. The table foot GUID is defined by OVMF as 96b582de-1fb2-45f7-baea-a366c55a082d and if the table is present this GUID is just below the reset vector, 48 bytes before the end of the firmware file. Add a parser for the ovmf reset block which takes a copy of the block, if the table foot guid is found, minus the footer and a function for later traversal to return the data area of any specified GUIDs. Signed-off-by: James Bottomley <jejb@linux.ibm.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20210204193939.16617-2-jejb@linux.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-02-16hw/i2c: Implement NPCM7XX SMBus Module FIFO ModeHao Wu
This patch implements the FIFO mode of the SMBus module. In FIFO, the user transmits or receives at most 16 bytes at a time. The FIFO mode allows the module to transmit large amount of data faster than single byte mode. Since we only added the device in a patch that is only a few commits away in the same patch set. We do not increase the VMstate version number in this special case. Reviewed-by: Doug Evans<dje@google.com> Reviewed-by: Tyrong Ting<kfting@nuvoton.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Corey Minyard <cminyard@mvista.com> Message-id: 20210210220426.3577804-6-wuhaotsh@google.com Acked-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-02-16hw/i2c: Implement NPCM7XX SMBus Module Single ModeHao Wu
This commit implements the single-byte mode of the SMBus. Each Nuvoton SoC has 16 System Management Bus (SMBus). These buses compliant with SMBus and I2C protocol. This patch implements the single-byte mode of the SMBus. In this mode, the user sends or receives a byte each time. The SMBus device transmits it to the underlying i2c device and sends an interrupt back to the QEMU guest. Reviewed-by: Doug Evans<dje@google.com> Reviewed-by: Tyrong Ting<kfting@nuvoton.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Corey Minyard <cminyard@mvista.com> Message-id: 20210210220426.3577804-2-wuhaotsh@google.com Acked-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-02-16linux-user/aarch64: Implement PROT_MTERichard Henderson
Remember the PROT_MTE bit as PAGE_MTE/PAGE_TARGET_2. Otherwise this does not yet have effect. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-25-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-02-16exec: Rename guest_{addr,range}_valid to *_untaggedRichard Henderson
The places that use these are better off using untagged addresses, so do not provide a tagged versions. Rename to make it clear about the address type. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-16-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-02-16exec: Use cpu_untagged_addr in g2h; split out g2h_untaggedRichard Henderson
Use g2h_untagged in contexts that have no cpu, e.g. the binary loaders that operate before the primary cpu is created. As a colollary, target_mmap and friends must use untagged addresses, since they are used by the loaders. Use g2h_untagged on values returned from target_mmap, as the kernel never applies a tag itself. Use g2h_untagged on all pc values. The only current user of tags, aarch64, removes tags from code addresses upon branch, so "pc" is always untagged. Use g2h with the cpu context on hand wherever possible. Use g2h_untagged in lock_user, which will be updated soon. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-13-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-02-16exec: Introduce cpu_untagged_addrRichard Henderson
Provide an identity fallback for target that do not use tagged addresses. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-12-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-02-16linux-user: Fix guest_addr_valid vs reserved_vaRichard Henderson
We must always use GUEST_ADDR_MAX, because even 32-bit hosts can use -R <reserved_va> to restrict the memory address of the guest. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-11-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-02-16linux-user: Do not use guest_addr_valid for h2g_validRichard Henderson
This is the only use of guest_addr_valid that does not begin with a guest address, but a host address being transformed to a guest address. We will shortly adjust guest_addr_valid to handle guest memory tags, and the host address should not be subjected to that. Move h2g_valid adjacent to the other h2g macros. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-10-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-02-16exec: Improve types for guest_addr_validRichard Henderson
Return bool not int; pass abi_ulong not 'unsigned long'. All callers use abi_ulong already, so the change in type has no effect. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210212184902.1251044-6-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-02-16exec: Use uintptr_t in cpu_ldst.hRichard Henderson
This is more descriptive than 'unsigned long'. No functional change, since these match on all linux+bsd hosts. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210212184902.1251044-5-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-02-16exec: Use uintptr_t for guest_baseRichard Henderson
This is more descriptive than 'unsigned long'. No functional change, since these match on all linux+bsd hosts. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210212184902.1251044-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-02-16linux-user: Introduce PAGE_ANONRichard Henderson
Record whether the backing page is anonymous, or if it has file backing. This will allow us to get close to the Linux AArch64 ABI for MTE, which allows tag memory only on ram-backed VMAs. The real ABI allows tag memory on files, when those files are on ram-backed filesystems, such as tmpfs. We will not be able to implement that in QEMU linux-user. Thankfully, anonymous memory for malloc arenas is the primary consumer of this feature, so this restricted version should still be of use. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-3-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-02-16tcg: Introduce target-specific page data for user-onlyRichard Henderson
This data can be allocated by page_alloc_target_data() and released by page_set_flags(start, end, prot | PAGE_RESET). This data will be used to hold tag memory for AArch64 MTE. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-02-15block: add bdrv_co_delete_file_noerrMaxim Levitsky
This function wraps bdrv_co_delete_file for the common case of removing a file, which was just created by format driver, on an error condition. It hides the -ENOTSUPP error, and reports all other errors otherwise. Use it in luks driver Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Message-Id: <20201217170904.946013-3-mlevitsk@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2021-02-15bswap.h: Remove unused float-access functionsPeter Maydell
The float-access functions stfl_*, stfq*, ldfl* and ldfq* are now unused; remove them. (Accesses to float64 and float32 types can be made with the ldl/stl/ldq/stq functions, as float64 and float32 are guaranteed to be typedefs for normal integer types.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20210208113428.7181-6-peter.maydell@linaro.org> Message-Id: <20210211122750.22645-15-alex.bennee@linaro.org>
2021-02-15gdbstub: Remove unused gdb_get_float32() and gdb_get_float64()Peter Maydell
The functions gdb_get_float32() and gdb_get_float64() are now unused; remove them. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20210208113428.7181-5-peter.maydell@linaro.org> Message-Id: <20210211122750.22645-14-alex.bennee@linaro.org>
2021-02-13Merge remote-tracking branch 'remotes/ericb/tags/pull-bitmaps-2021-02-12' ↵Peter Maydell
into staging bitmaps patches for 2021-02-12 - add 'transform' member to manipulate bitmaps across migration - work towards better error handling during bdrv_open # gpg: Signature made Fri 12 Feb 2021 23:19:39 GMT # gpg: using RSA key 71C2CC22B1C4602927D2F3AAA7A16B4A2527436A # gpg: Good signature from "Eric Blake <eblake@redhat.com>" [full] # gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>" [full] # gpg: aka "[jpeg image of size 6874]" [full] # Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A * remotes/ericb/tags/pull-bitmaps-2021-02-12: block: use return status of bdrv_append() block: return status from bdrv_append and friends qemu-iotests: 300: Add test case for modifying persistence of bitmap migration: dirty-bitmap: Allow control of bitmap persistence migration: dirty-bitmap: Use struct for alias map inner members Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-02-13Merge remote-tracking branch 'remotes/vivier/tags/m68k-for-6.0-pull-request' ↵Peter Maydell
into staging Pull request m68k-20210212 Move bootinfo headers to include/standard-headers/asm-m68k Add M68K_FEATURE_MSP, M68K_FEATURE_MOVEC, M68K_FEATURE_M68010 Add 68060 CR BUSCR and PCR (unimplemented) CPU types and features cleanup # gpg: Signature made Fri 12 Feb 2021 21:14:28 GMT # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier/tags/m68k-for-6.0-pull-request: m68k: import bootinfo headers from linux m68k: add MSP detection support for stack pointer swap helpers m68k: MOVEC insn. should generate exception if wrong CR is accessed m68k: add missing BUSCR/PCR CR defines, and BUSCR/PCR/CAAR CR to m68k_move_to/from m68k: improve comments on m68k_move_to/from helpers m68k: cascade m68k_features by m680xx_cpu_initfn() to improve readability m68k: improve cpu instantiation comments Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-02-12block: return status from bdrv_append and friendsVladimir Sementsov-Ogievskiy
The recommended use of qemu error api assumes returning status together with setting errp and avoid void functions with errp parameter. Let's improve bdrv_append and some friends to reduce error-propagation overhead in further patches. Choose int return status, because bdrv_replace_node_common() has call to bdrv_check_update_perm(), which reports int status, which seems correct to propagate. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20210202124956.63146-2-vsementsov@virtuozzo.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2021-02-12job: add .cancel handler for the driverVladimir Sementsov-Ogievskiy
To be used in mirror in the following commit to cancel in-flight io on target to not waste the time. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20210205163720.887197-5-vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2021-02-12block: add new BlockDriver handler: bdrv_cancel_in_flightVladimir Sementsov-Ogievskiy
It will be used to stop retrying NBD requests on mirror cancel. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20210205163720.887197-2-vsementsov@virtuozzo.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2021-02-11m68k: import bootinfo headers from linuxLaurent Vivier
Copy bootinfo.h and bootinfo-mac.h from arch/m68k/include/uapi/asm/ to include/standard-headers/asm-m68k/ Imported from linux v5.9 but didn't change since v4.14 (header update) and since v4.10 (content update). Signed-off-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20201220112615.933036-2-laurent@vivier.eu> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-02-11arm: Update infocenter.arm.com URLsPeter Maydell
Update infocenter.arm.com URLs for various pieces of Arm documentation to the new developer.arm.com equivalents. (There is a redirection in place from the old URLs, but we might as well update our comments in case the redirect ever disappears in future.) This patch covers all the URLs which are not MPS2/SSE-200/IoTKit related (those are dealt with in a different patch). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210205171456.19939-1-peter.maydell@linaro.org
2021-02-10Merge remote-tracking branch ↵Peter Maydell
'remotes/stefanha-gitlab/tags/block-pull-request' into staging Pull request v4: * Add PCI_EXPRESS Kconfig dependency to fix s390x in "multi-process: setup PCI host bridge for remote device" [Philippe and Thomas] # gpg: Signature made Wed 10 Feb 2021 09:26:14 GMT # gpg: using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full] # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full] # Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8 * remotes/stefanha-gitlab/tags/block-pull-request: (27 commits) docs: fix Parallels Image "dirty bitmap" section multi-process: perform device reset in the remote process multi-process: Retrieve PCI info from remote process multi-process: create IOHUB object to handle irq multi-process: Synchronize remote memory multi-process: PCI BAR read/write handling for proxy & remote endpoints multi-process: Forward PCI config space acceses to the remote process multi-process: add proxy communication functions multi-process: introduce proxy object multi-process: setup memory manager for remote device multi-process: Associate fd of a PCIDevice with its object multi-process: Initialize message handler in remote device multi-process: define MPQemuMsg format and transmission functions io: add qio_channel_readv_full_all_eof & qio_channel_readv_full_all helpers io: add qio_channel_writev_full_all helper multi-process: setup a machine object for remote device process multi-process: setup PCI host bridge for remote device multi-process: Add config option for multi-process QEMU memory: alloc RAM from file at offset multi-process: add configure and usage information ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-02-10multi-process: perform device reset in the remote processElena Ufimtseva
Perform device reset in the remote process when QEMU performs device reset. This is required to reset the internal state (like registers, etc...) of emulated devices Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com> Signed-off-by: John G Johnson <john.g.johnson@oracle.com> Signed-off-by: Jagannathan Raman <jag.raman@oracle.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 7cb220a51f565dc0817bd76e2f540e89c2d2b850.1611938319.git.jag.raman@oracle.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2021-02-10multi-process: create IOHUB object to handle irqJagannathan Raman
IOHUB object is added to manage PCI IRQs. It uses KVM_IRQFD ioctl to create irqfd to injecting PCI interrupts to the guest. IOHUB object forwards the irqfd to the remote process. Remote process uses this fd to directly send interrupts to the guest, bypassing QEMU. Signed-off-by: John G Johnson <john.g.johnson@oracle.com> Signed-off-by: Jagannathan Raman <jag.raman@oracle.com> Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 51d5c3d54e28a68b002e3875c59599c9f5a424a1.1611938319.git.jag.raman@oracle.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2021-02-10multi-process: Synchronize remote memoryJagannathan Raman
Add ProxyMemoryListener object which is used to keep the view of the RAM in sync between QEMU and remote process. A MemoryListener is registered for system-memory AddressSpace. The listener sends SYNC_SYSMEM message to the remote process when memory listener commits the changes to memory, the remote process receives the message and processes it in the handler for SYNC_SYSMEM message. Signed-off-by: Jagannathan Raman <jag.raman@oracle.com> Signed-off-by: John G Johnson <john.g.johnson@oracle.com> Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 04fe4e6a9ca90d4f11ab6f59be7652f5b086a071.1611938319.git.jag.raman@oracle.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2021-02-10multi-process: PCI BAR read/write handling for proxy & remote endpointsJagannathan Raman
Proxy device object implements handler for PCI BAR writes and reads. The handler uses BAR_WRITE/BAR_READ message to communicate to the remote process with the BAR address and value to be written/read. The remote process implements handler for BAR_WRITE/BAR_READ message. Signed-off-by: Jagannathan Raman <jag.raman@oracle.com> Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com> Signed-off-by: John G Johnson <john.g.johnson@oracle.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: a8b76714a9688be5552c4c92d089bc9e8a4707ff.1611938319.git.jag.raman@oracle.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2021-02-10multi-process: Forward PCI config space acceses to the remote processElena Ufimtseva
The Proxy Object sends the PCI config space accesses as messages to the remote process over the communication channel Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com> Signed-off-by: Jagannathan Raman <jag.raman@oracle.com> Signed-off-by: John G Johnson <john.g.johnson@oracle.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: d3c94f4618813234655356c60e6f0d0362ff42d6.1611938319.git.jag.raman@oracle.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2021-02-10multi-process: add proxy communication functionsElena Ufimtseva
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com> Signed-off-by: Jagannathan Raman <jag.raman@oracle.com> Signed-off-by: John G Johnson <john.g.johnson@oracle.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: d54edb4176361eed86b903e8f27058363b6c83b3.1611938319.git.jag.raman@oracle.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2021-02-10multi-process: introduce proxy objectElena Ufimtseva
Defines a PCI Device proxy object as a child of TYPE_PCI_DEVICE. Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com> Signed-off-by: Jagannathan Raman <jag.raman@oracle.com> Signed-off-by: John G Johnson <john.g.johnson@oracle.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: b5186ebfedf8e557044d09a768846c59230ad3a7.1611938319.git.jag.raman@oracle.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2021-02-10multi-process: setup memory manager for remote deviceJagannathan Raman
SyncSysMemMsg message format is defined. It is used to send file descriptors of the RAM regions to remote device. RAM on the remote device is configured with a set of file descriptors. Old RAM regions are deleted and new regions, each with an fd, is added to the RAM. Signed-off-by: Jagannathan Raman <jag.raman@oracle.com> Signed-off-by: John G Johnson <john.g.johnson@oracle.com> Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 7d2d1831d812e85f681e7a8ab99e032cf4704689.1611938319.git.jag.raman@oracle.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2021-02-10multi-process: Initialize message handler in remote deviceJagannathan Raman
Initializes the message handler function in the remote process. It is called whenever there's an event pending on QIOChannel that registers this function. Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com> Signed-off-by: John G Johnson <john.g.johnson@oracle.com> Signed-off-by: Jagannathan Raman <jag.raman@oracle.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 99d38d8b93753a6409ac2340e858858cda59ab1b.1611938319.git.jag.raman@oracle.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2021-02-10multi-process: define MPQemuMsg format and transmission functionsElena Ufimtseva
Defines MPQemuMsg, which is the message that is sent to the remote process. This message is sent over QIOChannel and is used to command the remote process to perform various tasks. Define transmission functions used by proxy and by remote. Signed-off-by: Jagannathan Raman <jag.raman@oracle.com> Signed-off-by: John G Johnson <john.g.johnson@oracle.com> Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 56ca8bcf95195b2b195b08f6b9565b6d7410bce5.1611938319.git.jag.raman@oracle.com [Replace struct iovec send[2] = {0} with {} to make clang happy as suggested by Peter Maydell <peter.maydell@linaro.org>. --Stefan] Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2021-02-10io: add qio_channel_readv_full_all_eof & qio_channel_readv_full_all helpersElena Ufimtseva
Adds qio_channel_readv_full_all_eof() and qio_channel_readv_full_all() to read both data and FDs. Refactors existing code to use these helpers. Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com> Signed-off-by: John G Johnson <john.g.johnson@oracle.com> Signed-off-by: Jagannathan Raman <jag.raman@oracle.com> Acked-by: Daniel P. Berrangé <berrange@redhat.com> Message-id: b059c4cc0fb741e794d644c144cc21372cad877d.1611938319.git.jag.raman@oracle.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2021-02-10io: add qio_channel_writev_full_all helperElena Ufimtseva
Adds qio_channel_writev_full_all() to transmit both data and FDs. Refactors existing code to use this helper. Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com> Signed-off-by: John G Johnson <john.g.johnson@oracle.com> Signed-off-by: Jagannathan Raman <jag.raman@oracle.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: Daniel P. Berrangé <berrange@redhat.com> Message-id: 480fbf1fe4152495d60596c9b665124549b426a5.1611938319.git.jag.raman@oracle.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2021-02-10multi-process: setup a machine object for remote device processJagannathan Raman
x-remote-machine object sets up various subsystems of the remote device process. Instantiate PCI host bridge object and initialize RAM, IO & PCI memory regions. Signed-off-by: John G Johnson <john.g.johnson@oracle.com> Signed-off-by: Jagannathan Raman <jag.raman@oracle.com> Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: c537f38d17f90453ca610c6b70cf3480274e0ba1.1611938319.git.jag.raman@oracle.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2021-02-10multi-process: setup PCI host bridge for remote deviceJagannathan Raman
PCI host bridge is setup for the remote device process. It is implemented using remote-pcihost object. It is an extension of the PCI host bridge setup by QEMU. Remote-pcihost configures a PCI bus which could be used by the remote PCI device to latch on to. Signed-off-by: Jagannathan Raman <jag.raman@oracle.com> Signed-off-by: John G Johnson <john.g.johnson@oracle.com> Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 0871ba857abb2eafacde07e7fe66a3f12415bfb2.1611938319.git.jag.raman@oracle.com [Added PCI_EXPRESS condition in hw/remote/Kconfig since remote-pcihost needs PCIe. This solves "make check" failure on s390x. Fix suggested by Philippe Mathieu-Daudé <philmd@redhat.com> and Thomas Huth <thuth@redhat.com>. --Stefan] Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2021-02-10spapr_numa.c: create spapr_numa_initial_nvgpu_numa_id() helperDaniel Henrique Barboza
We'll need to check the initial value given to spapr->gpu_numa_id when building the rtas DT, so put it in a helper for easier access and to avoid repetition. Tested-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> Message-Id: <20210128174213.1349181-3-danielhb413@gmail.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-02-10spapr: move spapr_machine_using_legacy_numa() to spapr_numa.cDaniel Henrique Barboza
This function is used only in spapr_numa.c. Tested-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> Message-Id: <20210128174213.1349181-2-danielhb413@gmail.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-02-10ppc/pnv: Introduce a LPC FW memory region attribute to map the PNORCédric Le Goater
This to map the PNOR from the machine init handler directly and finish the cleanup of the LPC model. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20210126171059.307867-8-clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-02-10ppc/xive: Add firmware bit when dumping the ENDsCédric Le Goater
ENDs allocated by OPAL for the HW thread VPs are tagged as owned by FW. Dump the state in 'info pic'. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20210126171059.307867-3-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-02-10spapr: Adjust firmware path of PCI devicesGreg Kurz
It is currently not possible to perform a strict boot from USB storage: $ qemu-system-ppc64 -accel kvm -nodefaults -nographic -serial stdio \ -boot strict=on \ -device qemu-xhci \ -device usb-storage,drive=disk,bootindex=0 \ -blockdev driver=file,node-name=disk,filename=fedora-ppc64le.qcow2 SLOF ********************************************************************** QEMU Starting Build Date = Jul 17 2020 11:15:24 FW Version = git-e18ddad8516ff2cf Press "s" to enter Open Firmware. Populating /vdevice methods Populating /vdevice/vty@71000000 Populating /vdevice/nvram@71000001 Populating /pci@800000020000000 00 0000 (D) : 1b36 000d serial bus [ usb-xhci ] No NVRAM common partition, re-initializing... Scanning USB XHCI: Initializing USB Storage SCSI: Looking for devices 101000000000000 DISK : "QEMU QEMU HARDDISK 2.5+" Using default console: /vdevice/vty@71000000 Welcome to Open Firmware Copyright (c) 2004, 2017 IBM Corporation All rights reserved. This program and the accompanying materials are made available under the terms of the BSD License available at http://www.opensource.org/licenses/bsd-license.php Trying to load: from: /pci@800000020000000/usb@0/storage@1/disk@101000000000000 ... E3405: No such device E3407: Load failed Type 'boot' and press return to continue booting the system. Type 'reset-all' and press return to reboot the system. Ready! 0 > The device tree handed over by QEMU to SLOF indeed contains: qemu,boot-list = "/pci@800000020000000/usb@0/storage@1/disk@101000000000000 HALT"; but the device node is named usb-xhci@0, not usb@0. This happens because the firmware names of PCI devices returned by get_boot_devices_list() come from pcibus_get_fw_dev_path(), while the sPAPR PHB code uses a different naming scheme for device nodes. This inconsistency has always been there but it was hidden for a long time because SLOF used to rename USB device nodes, until this commit, merged in QEMU 4.2.0 : commit 85164ad4ed9960cac842fa4cc067c6b6699b0994 Author: Alexey Kardashevskiy <aik@ozlabs.ru> Date: Wed Sep 11 16:24:32 2019 +1000 pseries: Update SLOF firmware image This fixes USB host bus adapter name in the device tree to match QEMU's one. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Fortunately, sPAPR implements the firmware path provider interface. This provides a way to override the default firmware paths. Just factor out the sPAPR PHB naming logic from spapr_dt_pci_device() to a helper, and use it in the sPAPR firmware path provider hook. Fixes: 85164ad4ed99 ("pseries: Update SLOF firmware image") Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <20210122170157.246374-1-groug@kaod.org> Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-02-09memory: alloc RAM from file at offsetJagannathan Raman
Allow RAM MemoryRegion to be created from an offset in a file, instead of allocating at offset of 0 by default. This is needed to synchronize RAM between QEMU & remote process. Signed-off-by: Jagannathan Raman <jag.raman@oracle.com> Signed-off-by: John G Johnson <john.g.johnson@oracle.com> Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 609996697ad8617e3b01df38accc5c208c24d74e.1611938319.git.jag.raman@oracle.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2021-02-09Merge remote-tracking branch 'remotes/nvme/tags/nvme-next-pull-request' into ↵Peter Maydell
staging Emulated NVMe device updates * deallocate or unwritten logical block error feature (me) * dataset management command (me) * compare command (Gollu Appalanaidu) * namespace types (Niklas Cassel) * zoned namespaces (Dmitry Fomichev) * smart critical warning toggle (Zhenwei Pi) * allow cmb and pmr to coexist (me) * pmr rds/wds support (Naveen Nagar) * cmb v1.4 logic (Padmakar Kalghatgi) And a lot of smaller fixes from Gollu Appalanaidu and Minwoo Im. # gpg: Signature made Tue 09 Feb 2021 07:25:18 GMT # gpg: using RSA key 522833AA75E2DCE6A24766C04DE1AF316D4F0DE9 # gpg: Good signature from "Klaus Jensen <its@irrelevant.dk>" [unknown] # gpg: aka "Klaus Jensen <k.jensen@samsung.com>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: DDCA 4D9C 9EF9 31CC 3468 4272 63D5 6FC5 E55D A838 # Subkey fingerprint: 5228 33AA 75E2 DCE6 A247 66C0 4DE1 AF31 6D4F 0DE9 * remotes/nvme/tags/nvme-next-pull-request: (56 commits) hw/block/nvme: refactor the logic for zone write checks hw/block/nvme: fix zone boundary check for append hw/block/nvme: fix wrong parameter name 'cross_read' hw/block/nvme: align with existing style hw/block/nvme: fix set feature save field check hw/block/nvme: fix set feature for error recovery hw/block/nvme: error if drive less than a zone size hw/block/nvme: lift cmb restrictions hw/block/nvme: bump to v1.4 hw/block/nvme: move cmb logic to v1.4 hw/block/nvme: add PMR RDS/WDS support hw/block/nvme: disable PMR at boot up hw/block/nvme: remove redundant zeroing of PMR registers hw/block/nvme: rename PMR/CMB shift/mask fields hw/block/nvme: allow cmb and pmr to coexist hw/block/nvme: move msix table and pba to BAR 0 hw/block/nvme: indicate CMB support through controller capabilities register hw/block/nvme: fix 64 bit register hi/lo split writes hw/block/nvme: add size to mmio read/write trace events hw/block/nvme: trigger async event during injecting smart warning ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-02-09Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into ↵Peter Maydell
staging * Fuzzing improvements (Qiuhao, Alexander) * i386: Fix BMI decoding for instructions with the 0x66 prefix (David) * initial attempt at fixing event_notifier emulation (Maxim) * i386: PKS emulation, fix for "qemu-system-i386 -cpu host" (myself) * meson: RBD test fixes (myself) * meson: TCI warnings (Philippe) * Leaner build for --disable-guest-agent, --disable-system and --disable-tools (Philippe, Stefan) * --enable-tcg-interpreter fix (Richard) * i386: SVM feature bits (Wei) * KVM bugfix (Thomas H.) * Add missing MemoryRegionOps callbacks (PJP) # gpg: Signature made Mon 08 Feb 2021 14:15:35 GMT # gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83 # gpg: issuer "pbonzini@redhat.com" # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini-gitlab/tags/for-upstream: (46 commits) target/i386: Expose VMX entry/exit load pkrs control bits target/i386: Add support for save/load IA32_PKRS MSR imx7-ccm: add digprog mmio write method tz-ppc: add dummy read/write methods spapr_pci: add spapr msi read method nvram: add nrf51_soc flash read method prep: add ppc-parity write method vfio: add quirk device write method pci-host: designware: add pcie-msi read method hw/pci-host: add pci-intack write method cpu-throttle: Remove timer_mod() from cpu_throttle_set() replay: rng-builtin support pc-bios/descriptors: fix paths in json files replay: fix replay of the interrupts accel/kvm/kvm-all: Fix wrong return code handling in dirty log code qapi/meson: Restrict UI module to system emulation and tools qapi/meson: Restrict system-mode specific modules qapi/meson: Remove QMP from user-mode emulation qapi/meson: Restrict qdev code to system-mode emulation meson: Restrict emulation code ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-02-08hw/block/nvme: bump to v1.4Klaus Jensen
With the new CMB logic in place, bump the implemented specification version to v1.4 by default. This requires adding the setting the CNTRLTYPE field and modifying the VWC field since 0x00 is no longer a valid value for bits 2:1. Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
2021-02-08hw/block/nvme: move cmb logic to v1.4Padmakar Kalghatgi
Implement v1.4 logic for configuring the Controller Memory Buffer. By default, the v1.4 scheme will be used (CMB must be explicitly enabled by the host), so drivers that only support v1.3 will not be able to use the CMB anymore. To retain the v1.3 behavior, set the boolean 'legacy-cmb' nvme device parameter. Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com> Signed-off-by: Padmakar Kalghatgi <p.kalghatgi@samsung.com> Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
2021-02-08hw/block/nvme: rename PMR/CMB shift/mask fieldsKlaus Jensen
Use the correct field names. Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-17 11:48:23 +0000