Age | Commit message (Collapse) | Author |
|
it will be used by follow up patches
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20210315180102.3008391-5-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
In x86/ACPI world, linux distros are using predictable
network interface naming since systemd v197. Which on
QEMU based VMs results into path based naming scheme,
that names network interfaces based on PCI topology.
With itm on has to plug NIC in exactly the same bus/slot,
which was used when disk image was first provisioned/configured
or one risks to loose network configuration due to NIC being
renamed to actually used topology.
That also restricts freedom to reshape PCI configuration of
VM without need to reconfigure used guest image.
systemd also offers "onboard" naming scheme which is
preferred over PCI slot/topology one, provided that
firmware implements:
"
PCI Firmware Specification 3.1
4.6.7. DSM for Naming a PCI or PCI Express Device Under
Operating Systems
"
that allows to assign user defined index to PCI device,
which systemd will use to name NIC. For example, using
-device e1000,acpi-index=100
guest will rename NIC to 'eno100', where 'eno' is default
prefix for "onboard" naming scheme. This doesn't require
any advance configuration on guest side to com in effect
at 'onboard' scheme takes priority over path based naming.
Hope is that 'acpi-index' it will be easier to consume by
management layer, compared to forcing specific PCI topology
and/or having several disk image templates for different
topologies and will help to simplify process of spawning
VM from the same template without need to reconfigure
guest NIC.
This patch adds, 'acpi-index'* property and wires up
a 32bit register on top of pci hotplug register block
to pass index value to AML code at runtime.
Following patch will add corresponding _DSM code and
wire it up to PCI devices described in ACPI.
*) name comes from linux kernel terminology
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20210315180102.3008391-3-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
This adds a flag in NetClientState, so that a net client can tell
its peer that the packets do not need to be padded to the minimum
size of an Ethernet frame (60 bytes) before sending to it.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
|
|
Add a helper to pad a short Ethernet frame to the minimum required
length, which can be used by backends' code.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
|
|
into staging
QAPI patches patches for 2021-03-16
# gpg: Signature made Fri 19 Mar 2021 15:06:52 GMT
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-qapi-2021-03-16-v4:
qapi: New -compat deprecated-input=crash
qapi: Implement deprecated-input=reject for QMP command arguments
qapi: Implement deprecated-input=reject for QMP commands
test-util-sockets: Add stub for monitor_set_cur()
qapi: Implement deprecated-output=hide for QMP introspection
monitor: Drop query-qmp-schema 'gen': false hack
qapi: Implement deprecated-output=hide for QMP event data
qapi: Implement deprecated-output=hide for QMP events
qapi: Implement deprecated-output=hide for QMP command results
qemu-options: New -compat to set policy for deprecated interfaces
qemuutil: remove qemu_set_fd_handler duplicate symbol
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
This policy rejects deprecated input, and thus permits "testing the
future". Implement it for QMP command arguments: reject commands with
deprecated ones. Example: when QEMU is run with -compat
deprecated-input=reject, then
{"execute": "eject", "arguments": {"device": "cd"}}
fails like this
{"error": {"class": "GenericError", "desc": "Deprecated parameter 'device' disabled by policy"}}
When the deprecated parameter is removed, the error will change to
{"error": {"class": "GenericError", "desc": "Parameter 'device' is unexpected"}}
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210318155519.1224118-11-armbru@redhat.com>
|
|
This policy rejects deprecated input, and thus permits "testing the
future". Implement it for QMP commands: make deprecated ones fail.
Example: when QEMU is run with -compat deprecated-input=reject, then
{"execute": "query-cpus"}
fails like this
{"error": {"class": "CommandNotFound", "desc": "Deprecated command query-cpus disabled by policy"}}
When the deprecated command is removed, the error will change to
{"error": {"class": "CommandNotFound", "desc": "The command query-cpus has not been found"}}
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210318155519.1224118-10-armbru@redhat.com>
|
|
This policy suppresses deprecated bits in output, and thus permits
"testing the future". Implement it for QMP command results. Example:
when QEMU is run with -compat deprecated-output=hide, then
{"execute": "query-cpus-fast"}
yields
{"return": [{"thread-id": 9805, "props": {"core-id": 0, "thread-id": 0, "socket-id": 0}, "qom-path": "/machine/unattached/device[0]", "cpu-index": 0, "target": "x86_64"}]}
instead of
{"return": [{"arch": "x86", "thread-id": 22436, "props": {"core-id": 0, "thread-id": 0, "socket-id": 0}, "qom-path": "/machine/unattached/device[0]", "cpu-index": 0, "target": "x86_64"}]}
Note the suppression of deprecated member "arch".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210318155519.1224118-4-armbru@redhat.com>
|
|
New option -compat lets you configure what to do when deprecated
interfaces get used. This is intended for testing users of the
management interfaces. It is experimental.
-compat deprecated-input=<input-policy> configures what to do when
deprecated input is received. Input policy can be "accept" (accept
silently), or "reject" (reject the request with an error).
-compat deprecated-output=<out-policy> configures what to do when
deprecated output is sent. Output policy can be "accept" (pass on
unchanged), or "hide" (filter out the deprecated parts).
Default is "accept". Policies other than "accept" are implemented
later in this series.
For now, -compat covers only syntactic aspects of QMP, i.e. stuff
tagged with feature 'deprecated'. We may want to extend it to cover
semantic aspects, CLI, and experimental features.
Note that there is no good way for management application to detect
presence of -compat: it's not visible output of query-qmp-schema or
query-command-line-options. Tolerable, because it's meant for
testing. If running with -compat fails, skip the test.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210318155519.1224118-3-armbru@redhat.com>
|
|
Almost all QOM type names consist only of letters, digits, '-', '_',
and '.'. Just two contain ':': "qemu:memory-region" and
"qemu:iommu-memory-region". Neither can be plugged with -object.
Rename them to "memory-region" and "iommu-memory-region".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210304140229.575481-3-armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Several QOM type names contain ',':
ARM,bitband-memory
etraxfs,pic
etraxfs,serial
etraxfs,timer
fsl,imx25
fsl,imx31
fsl,imx6
fsl,imx6ul
fsl,imx7
grlib,ahbpnp
grlib,apbpnp
grlib,apbuart
grlib,gptimer
grlib,irqmp
qemu,register
SUNW,bpp
SUNW,CS4231
SUNW,DBRI
SUNW,DBRI.prom
SUNW,fdtwo
SUNW,sx
SUNW,tcx
xilinx,zynq_slcr
xlnx,zynqmp
xlnx,zynqmp-pmu-soc
xlnx,zynq-xadc
These are all device types. They can't be plugged with -device /
device_add, except for xlnx,zynqmp-pmu-soc, and I doubt that one
actually works.
They *can* be used with -device / device_add to request help.
Usability is poor, though: you have to double the comma, like this:
$ qemu-system-x86_64 -device SUNW,,fdtwo,help
Trap for the unwary. The fact that this was broken in
device-introspect-test for more than six years until commit e27bd49876
fixed it demonstrates that "the unwary" includes seasoned developers.
One QOM type name contains ' ': "ICH9 SMB". Because having to
remember just one way to quote would be too easy.
Rename the "SUNW,FOO types to "sun-FOO". Summarily replace ',' and '
' by '-' in the other type names.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210304140229.575481-2-armbru@redhat.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Drop the crap deprecated in commit a1b40bda08 "blockdev: Deprecate
-drive with bogus interface type" (v5.1.0).
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20210309161214.1402527-5-armbru@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
Emulators are currently using OptsVisitor (via user_creatable_add_opts)
to parse the -object command line option. This has one extra feature,
compared to keyval, which is automatic conversion of integers to lists
as well as support for lists as repeated options:
-object memory-backend-ram,id=pc.ram,size=1048576000,host-nodes=0,policy=bind
So we cannot replace OptsVisitor with keyval right now. Still, this
patch moves the user_creatable_add_opts logic to vl.c since it is
not needed anywhere else, and makes it go through user_creatable_add_qapi.
In order to minimize code changes, the predicate still takes a string.
This can be changed later to use the ObjectType QAPI enum directly.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210312173547.1283477-3-pbonzini@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
The system emulator has a more complicated way of handling command line
options in that it reorders options before it processes them. This means
that parsing object options and creating the object happen at two
different points. Split the parsing part into a separate function that
can be reused by the system emulator command line.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
|
|
This is a version of user_creatable_process_cmdline() with an Error
parameter that never calls exit() and is therefore usable in HMP.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
|
|
The implementation for --object can be shared between
qemu-storage-daemon and other binaries, so move it into a function in
qom/object_interfaces.c that is accessible from everywhere.
This also requires moving the implementation of qmp_object_add() into a
new user_creatable_add_qapi(), because qom/qom-qmp-cmds.c is not linked
for tools.
user_creatable_print_help_from_qdict() can become static now.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
|
|
This function is now unused and can be removed.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
|
|
This converts object-add from 'gen': false to the ObjectOptions QAPI
type. As an immediate benefit, clients can now use QAPI schema
introspection for user creatable QOM objects.
It is also the first step towards making the QAPI schema the only
external interface for the creation of user creatable objects. Once all
other places (HMP and command lines of the system emulator and all
tools) go through QAPI, too, some object implementations can be
simplified because some checks (e.g. that mandatory options are set) are
already performed by QAPI, and in another step, QOM boilerplate code
could be generated from the schema.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
|
|
staging
emulated nvme updates and fixes
* fixes for Coverity CID 1450756, 1450757 and 1450758 (me)
* fix for a bug in zone management receive (me)
* metadata and end-to-end data protection support (me & Gollu Appalanaidu)
* verify support (Gollu Appalanaidu)
* multiple lba formats and format nvm support (Minwoo Im)
and a couple of misc refactorings from me.
v2:
- remove an unintended submodule update. Argh.
# gpg: Signature made Thu 18 Mar 2021 11:53:48 GMT
# gpg: using RSA key 522833AA75E2DCE6A24766C04DE1AF316D4F0DE9
# gpg: Good signature from "Klaus Jensen <its@irrelevant.dk>" [unknown]
# gpg: aka "Klaus Jensen <k.jensen@samsung.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: DDCA 4D9C 9EF9 31CC 3468 4272 63D5 6FC5 E55D A838
# Subkey fingerprint: 5228 33AA 75E2 DCE6 A247 66C0 4DE1 AF31 6D4F 0DE9
* remotes/nvme/tags/nvme-next-pull-request:
hw/block/nvme: add support for the format nvm command
hw/block/nvme: pull lba format initialization
hw/block/nvme: prefer runtime helpers instead of device parameters
hw/block/nvme: support multiple lba formats
hw/block/nvme: add non-mdts command size limit for verify
hw/block/nvme: add verify command
hw/block/nvme: end-to-end data protection
hw/block/nvme: add metadata support
hw/block/nvme: fix zone management receive reporting too many zones
hw/block/nvme: assert namespaces array indices
hw/block/nvme: fix potential overflow
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
'remotes/berrange-gitlab/tags/dep-many-pull-request' into staging
Remove many old deprecated features
The following features have been deprecated for well over the 2
release cycle we promise
``-drive file=json:{...{'driver':'file'}}`` (since 3.0)
``-vnc acl`` (since 4.0.0)
``-mon ...,control=readline,pretty=on|off`` (since 4.1)
``migrate_set_downtime`` and ``migrate_set_speed`` (since 2.8.0)
``query-named-block-nodes`` result ``encryption_key_missing`` (since 2.10.0)
``query-block`` result ``inserted.encryption_key_missing`` (since 2.10.0)
``migrate-set-cache-size`` and ``query-migrate-cache-size`` (since 2.11.0)
``query-named-block-nodes`` and ``query-block`` result dirty-bitmaps[i].status (since 4.0)
``query-cpus`` (since 2.12.0)
``query-cpus-fast`` ``arch`` output member (since 3.0.0)
``query-events`` (since 4.0)
chardev client socket with ``wait`` option (since 4.0)
``acl_show``, ``acl_reset``, ``acl_policy``, ``acl_add``, ``acl_remove`` (since 4.0.0)
``ide-drive`` (since 4.2)
``scsi-disk`` (since 4.2)
# gpg: Signature made Thu 18 Mar 2021 09:23:39 GMT
# gpg: using RSA key DAF3A6FDB26B62912D0E8E3FBE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" [full]
# gpg: aka "Daniel P. Berrange <berrange@redhat.com>" [full]
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF
* remotes/berrange-gitlab/tags/dep-many-pull-request:
block: remove support for using "file" driver with block/char devices
block: remove 'dirty-bitmaps' field from 'BlockInfo' struct
block: remove dirty bitmaps 'status' field
block: remove 'encryption_key_missing' flag from QAPI
hw/scsi: remove 'scsi-disk' device
hw/ide: remove 'ide-drive' device
chardev: reject use of 'wait' flag for socket client chardevs
machine: remove 'arch' field from 'query-cpus-fast' QMP command
machine: remove 'query-cpus' QMP command
migrate: remove QMP/HMP commands for speed, downtime and cache size
monitor: remove 'query-events' QMP command
monitor: raise error when 'pretty' option is used with HMP
ui, monitor: remove deprecated VNC ACL option and HMP commands
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
into staging
TCI argument extraction helpers and disassembler
TCG build fix for gcc 11
# gpg: Signature made Wed 17 Mar 2021 15:29:47 GMT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* remotes/rth-gitlab/tags/pull-tcg-20210317: (38 commits)
tcg: Fix prototypes for tcg_out_vec_op and tcg_out_op
tcg/tci: Split out tcg_out_op_r[iI]
tcg/tci: Split out tcg_out_op_v
tcg/tci: Split out tcg_out_op_{rrm,rrrm,rrrrm}
tcg/tci: Split out tcg_out_op_rrrrcl
tcg/tci: Split out tcg_out_op_rrrr
tcg/tci: Split out tcg_out_op_rrrrrr
tcg/tci: Split out tcg_out_op_rrcl
tcg/tci: Split out tcg_out_op_rrrbb
tcg/tci: Split out tcg_out_op_rrrrrc
tcg/tci: Split out tcg_out_op_rrrc
tcg/tci: Split out tcg_out_op_rrr
tcg/tci: Split out tcg_out_op_rr
tcg/tci: Split out tcg_out_op_p
tcg/tci: Split out tcg_out_op_l
tcg/tci: Split out tcg_out_op_rrs
tcg/tci: Push opcode emit into each case
tcg/tci: Implement the disassembler properly
tcg/tci: Remove tci_disas
tcg/tci: Hoist op_size checking into tci_args_*
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
'remotes/stsquad/tags/pull-misc-6.0-updates-170321-2' into staging
Final fixes for 6.0
- plugins physical address changes
- syscall tracking plugin
- plugin kernel-doc comments (without integration)
- libfdt build fix for guest-loader
# gpg: Signature made Wed 17 Mar 2021 07:19:23 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-misc-6.0-updates-170321-2:
hw/core: Only build guest-loader if libfdt is available
plugins: Fixes typo in qemu-plugin.h
plugins: getting qemu_plugin_get_hwaddr only expose one function prototype
plugins: expand kernel-doc for memory query and instrumentation
plugins: expand kernel-doc for instruction query and instrumentation
plugins: expand inline exec kernel-doc documentation.
plugins: add qemu_plugin_id_t to kernel-doc
plugins: add qemu_plugin_cb_flags to kernel-doc
plugins: expand the typedef kernel-docs for translation
plugins: expand the callback typedef kernel-docs
plugins: cleanup kernel-doc for qemu_plugin_install
plugins: expand kernel-doc for qemu_info_t
plugins: Expose physical addresses instead of device offsets
plugins: new syscalls plugin
utils: Use fixed-point arithmetic in qemu_strtosz
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Format NVM admin command can make a namespace or namespaces to be
with different LBA size and metadata size with protection information
types.
This patch introduces Format NVM command with LBA format, Metadata, and
Protection Information for the device. The secure erase operation things
and support for formatting zoned namespaces are yet to be added.
The parameter checks inside of this patch has been referred from
Keith's old branch.
Signed-off-by: Minwoo Im <minwoo.im@samsung.com>
[anaidu.gollu: rebased on e2e]
Signed-off-by: Gollu Appalanaidu <anaidu.gollu@samsung.com>
[k.jensen: rebased for reworked aio tracking]
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
|
|
See NVM Express 1.4, section 6.14 ("Verify Command").
Signed-off-by: Gollu Appalanaidu <anaidu.gollu@samsung.com>
[k.jensen: rebased, refactored for e2e]
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
|
|
Add support for namespaces formatted with protection information. The
type of end-to-end data protection (i.e. Type 1, Type 2 or Type 3) is
selected with the `pi` nvme-ns device parameter. If the number of
metadata bytes is larger than 8, the `pil` nvme-ns device parameter may
be used to control the location of the 8-byte DIF tuple. The default
`pil` value of '0', causes the DIF tuple to be transferred as the last
8 bytes of the metadata. Set to 1 to store this in the first eight bytes
instead.
Co-authored-by: Gollu Appalanaidu <anaidu.gollu@samsung.com>
Signed-off-by: Gollu Appalanaidu <anaidu.gollu@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
|
|
into staging
qemu-ga patch queue for soft-freeze
* fix guest-get-vcpus reporting after vcpu unplug
* coding style fix-ups
* report a reason for disabled commands
# gpg: Signature made Wed 17 Mar 2021 03:12:41 GMT
# gpg: using RSA key CEACC9E15534EBABB82D3FA03353C9CEF108B584
# gpg: Good signature from "Michael Roth <flukshun@gmail.com>" [full]
# gpg: aka "Michael Roth <mdroth@utexas.edu>" [full]
# gpg: aka "Michael Roth <mdroth@linux.vnet.ibm.com>" [full]
# Primary key fingerprint: CEAC C9E1 5534 EBAB B82D 3FA0 3353 C9CE F108 B584
* remotes/mdroth/tags/qga-pull-2021-03-16-tag:
qga: return a more explicit error on why a command is disabled
qga: Switch and case should be at the same indent
qga: Open brace '{' following struct go on the same
qga: Delete redundant spaces
qga: Add spaces around operator
qga: Correct loop count in qmp_guest_get_vcpus()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
into staging
q800 pull request 20210316
Several fixes for mac_via needed for future support of MacOS ROM
# gpg: Signature made Tue 16 Mar 2021 21:14:42 GMT
# gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg: issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C
* remotes/vivier/tags/q800-for-6.0-pull-request:
mac_via: remove VIA1 timer optimisations
mac_via: fix 60Hz VIA1 timer interval
mac_via: rename VBL timer to 60Hz timer
mac_via: don't re-inject ADB response when switching to IDLE state
mac_via: allow long accesses to VIA registers
mac_via: fix up adb_via_receive() trace events
mac_via: switch rtc pram trace-events to use hex rather than decimal for addresses
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
The same information is available via the 'recording' and 'busy' fields.
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
|
|
The generic 'migrate_set_parameters' command handle all types of param.
Only the QMP commands were documented in the deprecations page, but the
rationale for deprecating applies equally to HMP, and the replacements
exist. Furthermore the HMP commands are just shims to the QMP commands,
so removing the latter breaks the former unless they get re-implemented.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
|
|
staging
* add --enable/--disable-libgio to configure (Denis)
* small fixes (Pavel, myself)
* fuzzing update (Alexander)
# gpg: Signature made Tue 16 Mar 2021 18:30:38 GMT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini-gitlab/tags/for-upstream:
qemu-timer: allow freeing a NULL timer
hw/i8254: fix vmstate load
scsi: fix sense code for EREMOTEIO
Revert "accel: kvm: Add aligment assert for kvm_log_clear_one_slot"
configure: add option to explicitly enable/disable libgio
fuzz: move some DMA hooks
fuzz: configure a sparse-mem device, by default
memory: add a sparse memory device for fuzzing
fuzz: add a am53c974 generic-fuzzer config
fuzz: add instructions for building reproducers
fuzz: add a script to build reproducers
fuzz: don't leave orphan llvm-symbolizers around
fuzz: fix the pro100 generic-fuzzer config
MAINTAINERS: Cover fuzzer reproducer tests within 'Device Fuzzing'
tests/qtest: Only run fuzz-virtio-scsi when virtio-scsi is available
tests/qtest: Only run fuzz-megasas-test if megasas device is available
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
into staging
s390x updates:
- get rid of legacy_s390_alloc() and phys_mem_set_alloc()
- tcg: implement the MVPG condition-code-option bit
- fix g_autofree variable handing in the pci vfio code
- use official z15 names in the cpu model definitions
# gpg: Signature made Tue 16 Mar 2021 10:04:21 GMT
# gpg: using RSA key C3D0D66DC3624FF6A8C018CEDECF6B93C6F02FAF
# gpg: issuer "cohuck@redhat.com"
# gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>" [unknown]
# gpg: aka "Cornelia Huck <huckc@linux.vnet.ibm.com>" [full]
# gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>" [full]
# gpg: aka "Cornelia Huck <cohuck@kernel.org>" [unknown]
# gpg: aka "Cornelia Huck <cohuck@redhat.com>" [unknown]
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF
* remotes/cohuck-gitlab/tags/s390x-20210316:
s390x/pci: Add missing initialization for g_autofree variables
target/s390x: Store r1/r2 for page-translation exceptions during MVPG
target/s390x: Implement the MVPG condition-code-option bit
s390x/cpu_model: use official name for 8562
exec: Get rid of phys_mem_set_alloc()
s390x/kvm: Get rid of legacy_s390_alloc()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Actually print arguments as opposed to simply the opcodes
and, uselessly, the argument counts. Reuse all of the helpers
developed as part of the interpreter.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
into staging
m68k pull request 20210315
Add m68k virt machine
# gpg: Signature made Mon 15 Mar 2021 20:41:51 GMT
# gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg: issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C
* remotes/vivier/tags/m68k-for-6.0-pull-request:
m68k: add Virtual M68k Machine
m68k: add a system controller
m68k: add an interrupt controller
hw/intc: add goldfish-pic
hw/char: add goldfish-tty
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Getting the comment consistence with the function name
Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20201013002806.1447-3-luoyonggang@gmail.com>
Message-Id: <20210312172821.31647-15-alex.bennee@linaro.org>
|
|
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210312172821.31647-13-alex.bennee@linaro.org>
|
|
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210312172821.31647-12-alex.bennee@linaro.org>
|
|
Remove the extraneous @cb parameter and document the non-atomic nature
of the INLINE_ADD_U64 operation.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210312172821.31647-11-alex.bennee@linaro.org>
|
|
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210312172821.31647-10-alex.bennee@linaro.org>
|
|
Also add a note to explain currently they are unused.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210312172821.31647-9-alex.bennee@linaro.org>
|
|
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210312172821.31647-8-alex.bennee@linaro.org>
|
|
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210312172821.31647-7-alex.bennee@linaro.org>
|
|
kernel-doc doesn't like multiple Note sections. Also add an explicit
Return.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210312172821.31647-6-alex.bennee@linaro.org>
|
|
It seems kernel-doc struggles a bit with typedef structs but with
enough encouragement we can get something out of it.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210312172821.31647-5-alex.bennee@linaro.org>
|
|
This allows plugins to query for full virtual-to-physical address
translation for a given `qemu_plugin_hwaddr` and stops exposing the
offset within the device itself. As this change breaks the API,
QEMU_PLUGIN_VERSION is incremented.
Signed-off-by: Aaron Lindsay <aaron@os.amperecomputing.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210309202802.211756-1-aaron@os.amperecomputing.com>
Message-Id: <20210312172821.31647-3-alex.bennee@linaro.org>
|
|
qmp_disable_command() now takes an optional error string to return a
more explicit error message.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1928806
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
*fix up 80+ char line
Signed-off-by: Michael Roth <michael.roth@amd.com>
|
|
According to the "Guide To The Macintosh Family Hardware", the 60Hz VIA1 timer
on newer Macs such as the Quadra only exists for compatibility with old software
and is no longer synced to the VBL interval.
Rename the VBL timer to 60Hz timer to emphasise this and to prevent confusion
when the real VBL interrupt (now handled as a NuBus slot interrupt) is added in
future.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <20210311100505.22596-6-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
|
|
Since 5f8e93c3e2 ("util/qemu-timer: Make timer_free() imply timer_del()", 2021-01-08)
it is not possible anymore to pass a NULL pointer to timer_free(). Previously
it would do nothing as it would simply pass NULL down to g_free().
Rectify this, which also fixes "-chardev braille" when there is no device.
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
For testing, it can be useful to simulate an enormous amount of memory
(e.g. 2^64 RAM). This adds an MMIO device that acts as sparse memory.
When something writes a nonzero value to a sparse-mem address, we
allocate a block of memory. For now, since the only user of this device
is the fuzzer, we do not track and free zeroed blocks. The device has a
very low priority (so it can be mapped beneath actual RAM, and virtual
device MMIO regions).
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
into staging
usb: -usbdevice cleanup and un-deprecation.
usb: split usb-storage.
usb: misc fixes and cleanups.
# gpg: Signature made Mon 15 Mar 2021 18:02:28 GMT
# gpg: using RSA key A0328CFFB93A17A79901FE7D4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138
* remotes/kraxel/tags/usb-20210315-pull-request:
usb/storage: clear csw on reset
usb/storage: add kconfig symbols
usb/storage move usb-storage device to separate source file
usb/storage: move usb-bot device to separate source file
usb/storage: move declarations to usb/msd.h header
hw/usb: Extract VT82C686 UHCI PCI function into a new unit
hw/usb/hcd-uhci: Expose generic prototypes to local header
hw/southbridge: Add missing Kconfig dependency VT82C686 on USB_UHCI
usb: Document the missing -usbdevice options
usb: Un-deprecate -usbdevice (except for -usbdevice audio which gets removed)
usb: remove '-usbdevice u2f-key'
usb: remove support for -usbdevice parameters
hw/usb/bus: Remove the "full-path" property
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
staging
# gpg: Signature made Mon 15 Mar 2021 08:42:25 GMT
# gpg: using RSA key EF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request:
net: Do not fill legacy info_str for backends
hmp: Use QAPI NetdevInfo in hmp_info_network
net: Move NetClientState.info_str to dynamic allocations
tests: Add tests for query-netdev command
qapi: net: Add query-netdev command
pvrdma: wean code off pvrdma_ring.h kernel header
lan9118: switch to use qemu_receive_packet() for loopback
cadence_gem: switch to use qemu_receive_packet() for loopback
pcnet: switch to use qemu_receive_packet() for loopback
rtl8139: switch to use qemu_receive_packet() for loopback
tx_pkt: switch to use qemu_receive_packet_iov() for loopback
sungem: switch to use qemu_receive_packet() for loopback
msf2-mac: switch to use qemu_receive_packet() for loopback
dp8393x: switch to use qemu_receive_packet() for loopback packet
e1000: switch to use qemu_receive_packet() for loopback
net: introduce qemu_receive_packet()
e1000: fail early for evil descriptor
net: validate that ids are well formed
net: Fix build error when DEBUG_NET is on
virtio-net: calculating proper msix vectors on init
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# hw/core/machine.c
|