aboutsummaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2021-03-18Merge remote-tracking branch 'remotes/vivier/tags/q800-for-6.0-pull-request' ↵Peter Maydell
into staging q800 pull request 20210316 Several fixes for mac_via needed for future support of MacOS ROM # gpg: Signature made Tue 16 Mar 2021 21:14:42 GMT # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier/tags/q800-for-6.0-pull-request: mac_via: remove VIA1 timer optimisations mac_via: fix 60Hz VIA1 timer interval mac_via: rename VBL timer to 60Hz timer mac_via: don't re-inject ADB response when switching to IDLE state mac_via: allow long accesses to VIA registers mac_via: fix up adb_via_receive() trace events mac_via: switch rtc pram trace-events to use hex rather than decimal for addresses Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-18block: remove dirty bitmaps 'status' fieldDaniel P. Berrangé
The same information is available via the 'recording' and 'busy' fields. Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-03-18migrate: remove QMP/HMP commands for speed, downtime and cache sizeDaniel P. Berrangé
The generic 'migrate_set_parameters' command handle all types of param. Only the QMP commands were documented in the deprecations page, but the rationale for deprecating applies equally to HMP, and the replacements exist. Furthermore the HMP commands are just shims to the QMP commands, so removing the latter breaks the former unless they get re-implemented. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-03-17Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into ↵Peter Maydell
staging * add --enable/--disable-libgio to configure (Denis) * small fixes (Pavel, myself) * fuzzing update (Alexander) # gpg: Signature made Tue 16 Mar 2021 18:30:38 GMT # gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83 # gpg: issuer "pbonzini@redhat.com" # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini-gitlab/tags/for-upstream: qemu-timer: allow freeing a NULL timer hw/i8254: fix vmstate load scsi: fix sense code for EREMOTEIO Revert "accel: kvm: Add aligment assert for kvm_log_clear_one_slot" configure: add option to explicitly enable/disable libgio fuzz: move some DMA hooks fuzz: configure a sparse-mem device, by default memory: add a sparse memory device for fuzzing fuzz: add a am53c974 generic-fuzzer config fuzz: add instructions for building reproducers fuzz: add a script to build reproducers fuzz: don't leave orphan llvm-symbolizers around fuzz: fix the pro100 generic-fuzzer config MAINTAINERS: Cover fuzzer reproducer tests within 'Device Fuzzing' tests/qtest: Only run fuzz-virtio-scsi when virtio-scsi is available tests/qtest: Only run fuzz-megasas-test if megasas device is available Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-17Merge remote-tracking branch 'remotes/cohuck-gitlab/tags/s390x-20210316' ↵Peter Maydell
into staging s390x updates: - get rid of legacy_s390_alloc() and phys_mem_set_alloc() - tcg: implement the MVPG condition-code-option bit - fix g_autofree variable handing in the pci vfio code - use official z15 names in the cpu model definitions # gpg: Signature made Tue 16 Mar 2021 10:04:21 GMT # gpg: using RSA key C3D0D66DC3624FF6A8C018CEDECF6B93C6F02FAF # gpg: issuer "cohuck@redhat.com" # gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>" [unknown] # gpg: aka "Cornelia Huck <huckc@linux.vnet.ibm.com>" [full] # gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>" [full] # gpg: aka "Cornelia Huck <cohuck@kernel.org>" [unknown] # gpg: aka "Cornelia Huck <cohuck@redhat.com>" [unknown] # Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF * remotes/cohuck-gitlab/tags/s390x-20210316: s390x/pci: Add missing initialization for g_autofree variables target/s390x: Store r1/r2 for page-translation exceptions during MVPG target/s390x: Implement the MVPG condition-code-option bit s390x/cpu_model: use official name for 8562 exec: Get rid of phys_mem_set_alloc() s390x/kvm: Get rid of legacy_s390_alloc() Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-17tcg/tci: Implement the disassembler properlyRichard Henderson
Actually print arguments as opposed to simply the opcodes and, uselessly, the argument counts. Reuse all of the helpers developed as part of the interpreter. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-03-17Merge remote-tracking branch 'remotes/vivier/tags/m68k-for-6.0-pull-request' ↵Peter Maydell
into staging m68k pull request 20210315 Add m68k virt machine # gpg: Signature made Mon 15 Mar 2021 20:41:51 GMT # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier/tags/m68k-for-6.0-pull-request: m68k: add Virtual M68k Machine m68k: add a system controller m68k: add an interrupt controller hw/intc: add goldfish-pic hw/char: add goldfish-tty Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-17plugins: Fixes typo in qemu-plugin.hYonggang Luo
Getting the comment consistence with the function name Signed-off-by: Yonggang Luo <luoyonggang@gmail.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20201013002806.1447-3-luoyonggang@gmail.com> Message-Id: <20210312172821.31647-15-alex.bennee@linaro.org>
2021-03-17plugins: expand kernel-doc for memory query and instrumentationAlex Bennée
Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20210312172821.31647-13-alex.bennee@linaro.org>
2021-03-17plugins: expand kernel-doc for instruction query and instrumentationAlex Bennée
Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20210312172821.31647-12-alex.bennee@linaro.org>
2021-03-17plugins: expand inline exec kernel-doc documentation.Alex Bennée
Remove the extraneous @cb parameter and document the non-atomic nature of the INLINE_ADD_U64 operation. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20210312172821.31647-11-alex.bennee@linaro.org>
2021-03-17plugins: add qemu_plugin_id_t to kernel-docAlex Bennée
Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20210312172821.31647-10-alex.bennee@linaro.org>
2021-03-17plugins: add qemu_plugin_cb_flags to kernel-docAlex Bennée
Also add a note to explain currently they are unused. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20210312172821.31647-9-alex.bennee@linaro.org>
2021-03-17plugins: expand the typedef kernel-docs for translationAlex Bennée
Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20210312172821.31647-8-alex.bennee@linaro.org>
2021-03-17plugins: expand the callback typedef kernel-docsAlex Bennée
Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20210312172821.31647-7-alex.bennee@linaro.org>
2021-03-17plugins: cleanup kernel-doc for qemu_plugin_installAlex Bennée
kernel-doc doesn't like multiple Note sections. Also add an explicit Return. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20210312172821.31647-6-alex.bennee@linaro.org>
2021-03-17plugins: expand kernel-doc for qemu_info_tAlex Bennée
It seems kernel-doc struggles a bit with typedef structs but with enough encouragement we can get something out of it. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20210312172821.31647-5-alex.bennee@linaro.org>
2021-03-17plugins: Expose physical addresses instead of device offsetsAaron Lindsay
This allows plugins to query for full virtual-to-physical address translation for a given `qemu_plugin_hwaddr` and stops exposing the offset within the device itself. As this change breaks the API, QEMU_PLUGIN_VERSION is incremented. Signed-off-by: Aaron Lindsay <aaron@os.amperecomputing.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20210309202802.211756-1-aaron@os.amperecomputing.com> Message-Id: <20210312172821.31647-3-alex.bennee@linaro.org>
2021-03-16qga: return a more explicit error on why a command is disabledMarc-André Lureau
qmp_disable_command() now takes an optional error string to return a more explicit error message. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1928806 Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> *fix up 80+ char line Signed-off-by: Michael Roth <michael.roth@amd.com>
2021-03-16mac_via: rename VBL timer to 60Hz timerMark Cave-Ayland
According to the "Guide To The Macintosh Family Hardware", the 60Hz VIA1 timer on newer Macs such as the Quadra only exists for compatibility with old software and is no longer synced to the VBL interval. Rename the VBL timer to 60Hz timer to emphasise this and to prevent confusion when the real VBL interrupt (now handled as a NuBus slot interrupt) is added in future. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu> Message-Id: <20210311100505.22596-6-mark.cave-ayland@ilande.co.uk> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-03-16qemu-timer: allow freeing a NULL timerPaolo Bonzini
Since 5f8e93c3e2 ("util/qemu-timer: Make timer_free() imply timer_del()", 2021-01-08) it is not possible anymore to pass a NULL pointer to timer_free(). Previously it would do nothing as it would simply pass NULL down to g_free(). Rectify this, which also fixes "-chardev braille" when there is no device. Reported-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-03-16memory: add a sparse memory device for fuzzingAlexander Bulekov
For testing, it can be useful to simulate an enormous amount of memory (e.g. 2^64 RAM). This adds an MMIO device that acts as sparse memory. When something writes a nonzero value to a sparse-mem address, we allocate a block of memory. For now, since the only user of this device is the fuzzer, we do not track and free zeroed blocks. The device has a very low priority (so it can be mapped beneath actual RAM, and virtual device MMIO regions). Signed-off-by: Alexander Bulekov <alxndr@bu.edu> Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-03-16Merge remote-tracking branch 'remotes/kraxel/tags/usb-20210315-pull-request' ↵Peter Maydell
into staging usb: -usbdevice cleanup and un-deprecation. usb: split usb-storage. usb: misc fixes and cleanups. # gpg: Signature made Mon 15 Mar 2021 18:02:28 GMT # gpg: using RSA key A0328CFFB93A17A79901FE7D4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full] # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full] # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full] # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/usb-20210315-pull-request: usb/storage: clear csw on reset usb/storage: add kconfig symbols usb/storage move usb-storage device to separate source file usb/storage: move usb-bot device to separate source file usb/storage: move declarations to usb/msd.h header hw/usb: Extract VT82C686 UHCI PCI function into a new unit hw/usb/hcd-uhci: Expose generic prototypes to local header hw/southbridge: Add missing Kconfig dependency VT82C686 on USB_UHCI usb: Document the missing -usbdevice options usb: Un-deprecate -usbdevice (except for -usbdevice audio which gets removed) usb: remove '-usbdevice u2f-key' usb: remove support for -usbdevice parameters hw/usb/bus: Remove the "full-path" property Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-16Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into ↵Peter Maydell
staging # gpg: Signature made Mon 15 Mar 2021 08:42:25 GMT # gpg: using RSA key EF04965B398D6211 # gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" [marginal] # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211 * remotes/jasowang/tags/net-pull-request: net: Do not fill legacy info_str for backends hmp: Use QAPI NetdevInfo in hmp_info_network net: Move NetClientState.info_str to dynamic allocations tests: Add tests for query-netdev command qapi: net: Add query-netdev command pvrdma: wean code off pvrdma_ring.h kernel header lan9118: switch to use qemu_receive_packet() for loopback cadence_gem: switch to use qemu_receive_packet() for loopback pcnet: switch to use qemu_receive_packet() for loopback rtl8139: switch to use qemu_receive_packet() for loopback tx_pkt: switch to use qemu_receive_packet_iov() for loopback sungem: switch to use qemu_receive_packet() for loopback msf2-mac: switch to use qemu_receive_packet() for loopback dp8393x: switch to use qemu_receive_packet() for loopback packet e1000: switch to use qemu_receive_packet() for loopback net: introduce qemu_receive_packet() e1000: fail early for evil descriptor net: validate that ids are well formed net: Fix build error when DEBUG_NET is on virtio-net: calculating proper msix vectors on init Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # hw/core/machine.c
2021-03-15m68k: add Virtual M68k MachineLaurent Vivier
The machine is based on Goldfish interfaces defined by Google for Android simulator. It uses Goldfish-rtc (timer and RTC), Goldfish-pic (PIC) and Goldfish-tty (for serial port and early tty). The machine is created with 128 virtio-mmio bus, and they can be used to use serial console, GPU, disk, NIC, HID, ... Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210312214145.2936082-6-laurent@vivier.eu>
2021-03-15m68k: add a system controllerLaurent Vivier
Add a system controller for the m68k-virt machine. This controller allows the kernel to power off or reset the machine. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210312214145.2936082-5-laurent@vivier.eu>
2021-03-15m68k: add an interrupt controllerLaurent Vivier
A (generic) copy of the GLUE device we already have for q800 to use with the m68k-virt machine. The q800 one would disappear in the future as q800 uses actually the djMEMC controller. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210312214145.2936082-4-laurent@vivier.eu>
2021-03-15hw/intc: add goldfish-picLaurent Vivier
Implement the goldfish pic device as defined in https://android.googlesource.com/platform/external/qemu/+/master/docs/GOLDFISH-VIRTUAL-HARDWARE.TXT Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210312214145.2936082-3-laurent@vivier.eu>
2021-03-15hw/char: add goldfish-ttyLaurent Vivier
Implement the goldfish tty device as defined in https://android.googlesource.com/platform/external/qemu/+/master/docs/GOLDFISH-VIRTUAL-HARDWARE.TXT and based on the kernel driver code: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/tty/goldfish.c Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210312214145.2936082-2-laurent@vivier.eu>
2021-03-15Merge remote-tracking branch ↵Peter Maydell
'remotes/stefanha-gitlab/tags/block-pull-request' into staging Pull request # gpg: Signature made Mon 15 Mar 2021 09:50:58 GMT # gpg: using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full] # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full] # Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8 * remotes/stefanha-gitlab/tags/block-pull-request: virtio-blk: Respect discard granularity Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-15Merge remote-tracking branch 'remotes/philmd/tags/avr-20210315' into stagingPeter Maydell
AVR patches queue - Only reset 'interrupt_request' mask once all interrupts executed - Documentation and typo fixes # gpg: Signature made Sun 14 Mar 2021 23:45:34 GMT # gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE # gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full] # Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE * remotes/philmd/tags/avr-20210315: target/avr: Fix interrupt execution target/avr: Fix some comment spelling errors hw/avr/arduino: List board schematic links hw/misc/led: Add yellow LED Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-15usb/storage: move declarations to usb/msd.h headerGerd Hoffmann
In preparation for splitting the usb-storage.c file move declarations to the new usb/msd.h header file. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-Id: <20210312090425.772900-2-kraxel@redhat.com>
2021-03-15usb: remove support for -usbdevice parametersPaolo Bonzini
No device needs them anymore and in fact they're undocumented. Remove the code. The only change in behavior is that "-usbdevice braille:hello" now reports an error, which is a bugfix. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210310173323.1422754-2-thuth@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2021-03-15hw/usb/bus: Remove the "full-path" propertyThomas Huth
This property was only required for the pc-1.0 and earlier machine types. Since these have been removed now, we can delete the property as well. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210302120152.118042-1-thuth@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2021-03-15Merge remote-tracking branch ↵Peter Maydell
'remotes/bkoppelmann2/tags/pull-tricore-20210314' into staging - Added triboard with tc27x_soc - Cleaned up get_physical_address() - Fixed corner case bugs in OPC2_32_RRPW_IMASK and OPC2_32_RRPW_IMASK insns # gpg: Signature made Sun 14 Mar 2021 13:53:11 GMT # gpg: using RSA key 6E636A7E83F2DD0CFA6E6E370AD2C6396B69CA14 # gpg: issuer "kbastian@mail.uni-paderborn.de" # gpg: Good signature from "Bastian Koppelmann <kbastian@mail.uni-paderborn.de>" [full] # Primary key fingerprint: 6E63 6A7E 83F2 DD0C FA6E 6E37 0AD2 C639 6B69 CA14 * remotes/bkoppelmann2/tags/pull-tricore-20210314: target/tricore: Fix OPC2_32_RRPW_EXTR for width=0 target/tricore: Fix imask OPC2_32_RRPW_IMASK for r3+1 == r2 tricore: fixed faulty conditions for extr and imask target/tricore: Remove unused definitions target/tricore: Pass MMUAccessType to get_physical_address() target/tricore: Replace magic value by MMU_DATA_LOAD definition tricore: added triboard with tc27x_soc Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-15exec: Get rid of phys_mem_set_alloc()David Hildenbrand
As the last user is gone, we can get rid of phys_mem_set_alloc() and simplify. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Halil Pasic <pasic@linux.ibm.com> Cc: Cornelia Huck <cohuck@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Thomas Huth <thuth@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Peter Xu <peterx@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20210303130916.22553-3-david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2021-03-15virtio-blk: Respect discard granularityAkihiko Odaki
Report the configured granularity for discard operation to the guest. If this is not set use the block size. Since until now we have ignored the configured discard granularity and always reported the block size, let's add 'report-discard-granularity' property and disable it for older machine types to avoid migration issues. Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20210225001239.47046-1-akihiko.odaki@gmail.com>
2021-03-15hmp: Use QAPI NetdevInfo in hmp_info_networkAlexey Kirillov
Replace usage of legacy field info_str of NetClientState for backend network devices with QAPI NetdevInfo stored_config that already used in QMP query-netdev. This change increases the detail of the "info network" output and takes a more general approach to composing the output. NIC and hubports still use legacy info_str field. Signed-off-by: Alexey Kirillov <lekiravi@yandex-team.ru> Signed-off-by: Jason Wang <jasowang@redhat.com>
2021-03-15net: Move NetClientState.info_str to dynamic allocationsAlexey Kirillov
The info_str field of the NetClientState structure is static and has a size of 256 bytes. This amount is often unclaimed, and the field itself is used exclusively for HMP "info network". The patch translates info_str to dynamic memory allocation. This action is also allows us to painlessly discard usage of this field for backend devices. Signed-off-by: Alexey Kirillov <lekiravi@yandex-team.ru> Signed-off-by: Jason Wang <jasowang@redhat.com>
2021-03-15qapi: net: Add query-netdev commandAlexey Kirillov
The query-netdev command is used to get the configuration of the current network device backends (netdevs). This is the QMP analog of the HMP command "info network" but only for netdevs (i.e. excluding NIC and hubports). The query-netdev command returns an array of objects of the NetdevInfo type, which are an extension of Netdev type. It means that response can be used for netdev-add after small modification. This can be useful for recreate the same netdev configuration. Information about the network device is filled in when it is created or modified and is available through the NetClientState->stored_config. Signed-off-by: Alexey Kirillov <lekiravi@yandex-team.ru> Acked-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2021-03-15pvrdma: wean code off pvrdma_ring.h kernel headerCornelia Huck
The pvrdma code relies on the pvrdma_ring.h kernel header for some basic ring buffer handling. The content of that header isn't very exciting, but contains some (q)atomic_*() invocations that (a) cause manual massaging when doing a headers update, and (b) are an indication that we probably should not be importing that header at all. Let's reimplement the ring buffer handling directly in the pvrdma code instead. This arguably also improves readability of the code. Importing the header can now be dropped. Signed-off-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Yuval Shaia <yuval.shaia.ml@gmail.com> Tested-by: Yuval Shaia <yuval.shaia.ml@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2021-03-15net: introduce qemu_receive_packet()Jason Wang
Some NIC supports loopback mode and this is done by calling nc->info->receive() directly which in fact suppresses the effort of reentrancy check that is done in qemu_net_queue_send(). Unfortunately we can't use qemu_net_queue_send() here since for loopback there's no sender as peer, so this patch introduce a qemu_receive_packet() which is used for implementing loopback mode for a NIC with this check. NIC that supports loopback mode will be converted to this helper. This is intended to address CVE-2021-3416. Cc: Prasad J Pandit <ppandit@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Cc: qemu-stable@nongnu.org Signed-off-by: Jason Wang <jasowang@redhat.com>
2021-03-15hw/misc/led: Add yellow LEDPhilippe Mathieu-Daudé
Add the yellow "lime" LED. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Michael Rolnik <mrolnik@gmail.com> Message-Id: <20210313165445.2113938-2-f4bug@amsat.org>
2021-03-14tricore: added triboard with tc27x_socAndreas Konopik
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Andreas Konopik <andreas.konopik@efs-auto.de> Signed-off-by: David Brenken <david.brenken@efs-auto.de> Signed-off-by: Georg Hofstetter <georg.hofstetter@efs-auto.de> Signed-off-by: Robert Rasche <robert.rasche@efs-auto.de> Signed-off-by: Lars Biermanski <lars.biermanski@efs-auto.de> Message-Id: <20201109165055.10508-2-david.brenken@efs-auto.org> Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
2021-03-14Merge remote-tracking branch ↵Peter Maydell
'remotes/pmaydell/tags/pull-target-arm-20210314' into staging target-arm queue: * versal: Support XRAMs and XRAM controller * smmu: Various minor bug fixes * SVE emulation: fix bugs handling odd vector lengths * allwinner-sun8i-emac: traverse transmit queue using TX_CUR_DESC register value * tests/acceptance: fix orangepi-pc acceptance tests * hw/timer/sse-timer: Propagate eventual error in sse_timer_realize() * hw/arm/virt: KVM: The IPA lower bound is 32 * npcm7xx: support MFT module * pl110, pxa2xx_lcd: tidy up template headers # gpg: Signature made Sun 14 Mar 2021 13:17:43 GMT # gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE # gpg: issuer "peter.maydell@linaro.org" # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate] # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * remotes/pmaydell/tags/pull-target-arm-20210314: (39 commits) hw/display/pxa2xx: Inline template header hw/display/pxa2xx: Apply whitespace-only coding style fixes to template header hw/display/pxa2xx: Apply brace-related coding style fixes to template header hw/display/pxa2xx: Remove use of BITS in pxa2xx_template.h hw/display/pxa2xx_lcd: Remove dest_width state field hw/display/pxa2xx_lcd: Remove dead code for non-32-bpp surfaces hw/display/pl110: Remove use of BITS from pl110_template.h hw/display/pl110: Pull included-once parts of template header into pl110.c hw/display/pl110: Remove dead code for non-32-bpp surfaces tests/qtest: Test PWM fan RPM using MFT in PWM test hw/arm: Connect PWM fans in NPCM7XX boards hw/arm: Add MFT device to NPCM7xx Soc hw/misc: Add NPCM7XX MFT Module hw/misc: Add GPIOs for duty in NPCM7xx PWM hw/arm/virt: KVM: The IPA lower bound is 32 accel: kvm: Fix kvm_type invocation hw/timer/sse-timer: Propagate eventual error in sse_timer_realize() tests/acceptance: drop ARMBIAN_ARTIFACTS_CACHED condition for orangepi-pc, cubieboard tests tests/acceptance: update sunxi kernel from armbian to 5.10.16 tests/acceptance/boot_linux_console: change URL for test_arm_orangepi_bionic_20_08 ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-12hw/arm: Connect PWM fans in NPCM7XX boardsHao Wu
This patch adds fan_splitters (split IRQs) in NPCM7XX boards. Each fan splitter corresponds to 1 PWM output and can connect to multiple fan inputs (MFT devices). In NPCM7XX boards(NPCM750 EVB and Quanta GSJ boards), we initializes these splitters and connect them to their corresponding modules according their specific device trees. Reviewed-by: Doug Evans <dje@google.com> Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20210311180855.149764-5-wuhaotsh@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-12hw/arm: Add MFT device to NPCM7xx SocHao Wu
This patch adds the recently implemented MFT device to the NPCM7XX SoC file. Reviewed-by: Doug Evans <dje@google.com> Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Message-id: 20210311180855.149764-4-wuhaotsh@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-12hw/misc: Add NPCM7XX MFT ModuleHao Wu
This patch implements Multi Function Timer (MFT) module for NPCM7XX. This module is mainly used to configure PWM fans. It has just enough functionality to make the PWM fan kernel module work. The module takes two input, the max_rpm of a fan (modifiable via QMP) and duty cycle (a GPIO from the PWM module.) The actual measured RPM is equal to max_rpm * duty_cycle / NPCM7XX_PWM_MAX_DUTY. The RPM is measured as a counter compared to a prescaled input clock. The kernel driver reads this counter and report to user space. Refs: https://github.com/torvalds/linux/blob/master/drivers/hwmon/npcm750-pwm-fan.c Reviewed-by: Doug Evans <dje@google.com> Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Message-id: 20210311180855.149764-3-wuhaotsh@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-12hw/misc: Add GPIOs for duty in NPCM7xx PWMHao Wu
This patch adds GPIOs in NPCM7xx PWM module for its duty values. The purpose of this is to connect it to the MFT module to provide an input for measuring a PWM fan's RPM. Each PWM module has NPCM7XX_PWM_PER_MODULE of GPIOs, each one corresponds to one PWM instance and can connect to multiple fan instances in MFT. Reviewed-by: Doug Evans <dje@google.com> Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20210311180855.149764-2-wuhaotsh@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-12accel: kvm: Fix kvm_type invocationAndrew Jones
Prior to commit f2ce39b4f067 a MachineClass kvm_type method only needed to be registered to ensure it would be executed. With commit f2ce39b4f067 a kvm-type machine property must also be specified. hw/arm/virt relies on the kvm_type method to pass its selected IPA limit to KVM, but this is not exposed as a machine property. Restore the previous functionality of invoking kvm_type when it's present. Fixes: f2ce39b4f067 ("vl: make qemu_get_machine_opts static") Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 20210310135218.255205-2-drjones@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-16 17:37:53 +0000