aboutsummaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2020-07-14block: Add support to warn on backing file change without formatEric Blake
For now, this is a mechanical addition; all callers pass false. But the next patch will use it to improve 'qemu-img rebase -u' when selecting a backing file with no format. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com> Message-Id: <20200706203954.341758-10-eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-07-14file-posix: Mitigate file fragmentation with extent size hintsKevin Wolf
Especially when O_DIRECT is used with image files so that the page cache indirection can't cause a merge of allocating requests, the file will fragment on the file system layer, with a potentially very small fragment size (this depends on the requests the guest sent). On Linux, fragmentation can be reduced by setting an extent size hint when creating the file (at least on XFS, it can't be set any more after the first extent has been allocated), basically giving raw files a "cluster size" for allocation. This adds a create option to set the extent size hint, and changes the default from not setting a hint to setting it to 1 MB. The main reason why qcow2 defaults to smaller cluster sizes is that COW becomes more expensive, which is not an issue with raw files, so we can choose a larger size. The tradeoff here is only potentially wasted disk space. For qcow2 (or other image formats) over file-posix, the advantage should even be greater because they grow sequentially without leaving holes, so there won't be wasted space. Setting even larger extent size hints for such images may make sense. This can be done with the new option, but let's keep the default conservative for now. The effect is very visible with a test that intentionally creates a badly fragmented file with qemu-img bench (the time difference while creating the file is already remarkable) and then looks at the number of extents and the time a simple "qemu-img map" takes. Without an extent size hint: $ ./qemu-img create -f raw -o extent_size_hint=0 ~/tmp/test.raw 10G Formatting '/home/kwolf/tmp/test.raw', fmt=raw size=10737418240 extent_size_hint=0 $ ./qemu-img bench -f raw -t none -n -w ~/tmp/test.raw -c 1000000 -S 8192 -o 0 Sending 1000000 write requests, 4096 bytes each, 64 in parallel (starting at offset 0, step size 8192) Run completed in 25.848 seconds. $ ./qemu-img bench -f raw -t none -n -w ~/tmp/test.raw -c 1000000 -S 8192 -o 4096 Sending 1000000 write requests, 4096 bytes each, 64 in parallel (starting at offset 4096, step size 8192) Run completed in 19.616 seconds. $ filefrag ~/tmp/test.raw /home/kwolf/tmp/test.raw: 2000000 extents found $ time ./qemu-img map ~/tmp/test.raw Offset Length Mapped to File 0 0x1e8480000 0 /home/kwolf/tmp/test.raw real 0m1,279s user 0m0,043s sys 0m1,226s With the new default extent size hint of 1 MB: $ ./qemu-img create -f raw -o extent_size_hint=1M ~/tmp/test.raw 10G Formatting '/home/kwolf/tmp/test.raw', fmt=raw size=10737418240 extent_size_hint=1048576 $ ./qemu-img bench -f raw -t none -n -w ~/tmp/test.raw -c 1000000 -S 8192 -o 0 Sending 1000000 write requests, 4096 bytes each, 64 in parallel (starting at offset 0, step size 8192) Run completed in 11.833 seconds. $ ./qemu-img bench -f raw -t none -n -w ~/tmp/test.raw -c 1000000 -S 8192 -o 4096 Sending 1000000 write requests, 4096 bytes each, 64 in parallel (starting at offset 4096, step size 8192) Run completed in 10.155 seconds. $ filefrag ~/tmp/test.raw /home/kwolf/tmp/test.raw: 178 extents found $ time ./qemu-img map ~/tmp/test.raw Offset Length Mapped to File 0 0x1e8480000 0 /home/kwolf/tmp/test.raw real 0m0,061s user 0m0,040s sys 0m0,014s Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20200707142329.48303-1-kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-07-13hw/char: Convert the Ibex UART to use the registerfields APIAlistair Francis
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 06372c9cdeec715077899e71c858d9f0a2a3395b.1594332223.git.alistair.francis@wdc.com Message-Id: <06372c9cdeec715077899e71c858d9f0a2a3395b.1594332223.git.alistair.francis@wdc.com>
2020-07-13hw/char: Convert the Ibex UART to use the qdev Clock modelAlistair Francis
Conver the Ibex UART to use the recently added qdev-clock functions. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: b0136fad870a29049959ec161c1217b967d7e19d.1594332223.git.alistair.francis@wdc.com Message-Id: <b0136fad870a29049959ec161c1217b967d7e19d.1594332223.git.alistair.francis@wdc.com>
2020-07-13riscv: Add opensbi firmware dynamic supportAtish Patra
OpenSBI is the default firmware in Qemu and has various firmware loading options. Currently, qemu loader uses fw_jump which has a compile time pre-defined address where fdt & kernel image must reside. This puts a constraint on image size of the Linux kernel depending on the fdt location and available memory. However, fw_dynamic allows the loader to specify the next stage location (i.e. Linux kernel/U-Boot) in memory and other configurable boot options available in OpenSBI. Add support for OpenSBI dynamic firmware loading support. This doesn't break existing setup and fw_jump will continue to work as it is. Any other firmware will continue to work without any issues as long as it doesn't expect anything specific from loader in "a2" register. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Tested-by: Bin Meng <bin.meng@windriver.com> Message-Id: <20200701183949.398134-4-atish.patra@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-13RISC-V: Copy the fdt in dram instead of ROMAtish Patra
Currently, the fdt is copied to the ROM after the reset vector. The firmware has to copy it to DRAM. Instead of this, directly copy the device tree to a pre-computed dram address. The device tree load address should be as far as possible from kernel and initrd images. That's why it is kept at the end of the DRAM or 4GB whichever is lesser. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Tested-by: Bin Meng <bin.meng@windriver.com> Message-Id: <20200701183949.398134-3-atish.patra@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-13riscv: Unify Qemu's reset vector code pathAtish Patra
Currently, all riscv machines except sifive_u have identical reset vector code implementations with memory addresses being different for all machines. They can be easily combined into a single function in common code. Move it to common function and let all the machines use the common function. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Tested-by: Bin Meng <bin.meng@windriver.com> Message-Id: <20200701183949.398134-2-atish.patra@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-13util: Introduce qemu_get_host_name()Michal Privoznik
This function offers operating system agnostic way to fetch host name. It is implemented for both POSIX-like and Windows systems. Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Cc: qemu-stable@nongnu.org Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2020-07-13bswap.h: Include <endian.h> on Haiku for bswap operationsDavid CARLIER
Haiku puts the bswap* functions in <endian.h>; pull in that include file on that platform. Signed-off-by: David Carlier <devnexen@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200703145614.16684-7-peter.maydell@linaro.org [PMM: Expanded commit message] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-07-13osdep.h: For Haiku, define SIGIO as equivalent to SIGPOLLDavid CARLIER
Haiku doesn't provide SIGIO; fix this up in osdep.h by defining it as equal to SIGPOLL. Signed-off-by: David Carlier <devnexen@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200703145614.16684-6-peter.maydell@linaro.org [PMM: Expanded commit message] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-07-13osdep.h: Always include <sys/signal.h> if it existsDavid CARLIER
Regularize our handling of <sys/signal.h>: currently we include it in osdep.h, but only for OpenBSD, and we include it without an ifdef guard in a couple of C files. This causes problems for Haiku, which doesn't have that header. Instead, check in configure whether sys/signal.h exists, and if it does then always include it from osdep.h. Signed-off-by: David Carlier <devnexen@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20200703145614.16684-5-peter.maydell@linaro.org [PMM: Expanded commit message; rename to HAVE_SYS_SIGNAL_H] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-07-13Add the ability to change the FEC PHY MDIO devices numbers on i.MX7 processorJean-Christophe Dubois
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Message-id: c850187322be9930e47c8b234c385a7d0da245cb.1593806826.git.jcd@tribudubois.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: updated for object_property_set_uint() argument reordering] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-07-13Add the ability to change the FEC PHY MDIO device number on i.MX6 processorJean-Christophe Dubois
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Message-id: 05a64e83eb1c0c865ac077b22c599425c024c02c.1593806826.git.jcd@tribudubois.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: updated for object_property_set_uint() argument reordering] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-07-13Add the ability to change the FEC PHY MDIO device number on i.MX25 processorJean-Christophe Dubois
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Message-id: 9f8923ecd974160ae8f634c275b1100c2cbe66d7.1593806826.git.jcd@tribudubois.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: updated for object_property_set_uint() argument reordering] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-07-13hw/arm/bcm2836: Remove unused 'cpu_type' fieldPhilippe Mathieu-Daudé
The 'cpu_type' has been moved from BCM283XState to BCM283XClass in commit 210f47840d, but we forgot to remove the old variable. Do it now. Fixes: 210f47840d ("hw/arm/bcm2836: Hardcode correct CPU type") Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200703200459.23294-1-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-07-13Merge remote-tracking branch ↵Peter Maydell
'remotes/huth-gitlab/tags/pull-request-2020-07-13' into staging * Some fuzzer related fixes * Fixes / improvements for the "configure" script * Doc updates * Gitlab pipeline-status script # gpg: Signature made Mon 13 Jul 2020 11:48:32 BST # gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5 # gpg: issuer "thuth@redhat.com" # gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full] # gpg: aka "Thomas Huth <thuth@redhat.com>" [full] # gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full] # gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown] # Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5 * remotes/huth-gitlab/tags/pull-request-2020-07-13: docs/system/s390x: Improve the 3270 documentation GitLab Gating CI: introduce pipeline-status contrib script disas/sh4: Add missing fallthrough annotations Remove the CONFIG_PRAGMA_DIAGNOSTIC_AVAILABLE switch docs/devel/fuzzing: Fix bugs in documentation tests/qtest/fuzz: Add missing spaces in description fuzz: add missing header for rcu_enable_atfork configure: do not clobber CFLAGS with --enable-fuzzing configure: fix malloc check Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-07-13Remove the CONFIG_PRAGMA_DIAGNOSTIC_AVAILABLE switchThomas Huth
GCC supports "#pragma GCC diagnostic" since version 4.6, and Clang seems to support it, too, since its early versions 3.x. That means that our minimum required compiler versions all support this pragma already and we can remove the test from configure and all the related #ifdefs in the code. Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20200710045515.25986-1-thuth@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-07-13chardev: Reduce "char-mux.h" scope, rename it "chardev-internal.h"Philippe Mathieu-Daudé
No file out of chardev/ requires access to this header, restrict its scope. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200423202112.644-5-philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2020-07-11Merge remote-tracking branch 'remotes/philmd-gitlab/tags/avr-port-20200711' ↵Peter Maydell
into staging 8bit AVR port from Michael Rolnik. Michael started to work on the AVR port few years ago [*] and kept improving the code over various series. List of people who help him (in chronological order): - Richard Henderson - Sarah Harris and Edward Robbins - Philippe Mathieu-Daudé and Aleksandar Markovic - Pavel Dovgalyuk - Thomas Huth [*] The oldest contribution I could find on the list is from 2016: https://lists.nongnu.org/archive/html/qemu-devel/2016-06/msg02985.html Tests included: $ avocado --show=app run -t arch:avr tests/acceptance/ Fetching asset from tests/acceptance/machine_avr6.py:AVR6Machine.test_freertos (1/1) tests/acceptance/machine_avr6.py:AVR6Machine.test_freertos: PASS (2.13 s) RESULTS : PASS 1 | ERROR 0 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 0 | CANCEL 0 JOB TIME : 2.35 s $ make check-qtest-avr TEST check-qtest-avr: tests/qtest/boot-serial-test TEST check-qtest-avr: tests/qtest/cdrom-test TEST check-qtest-avr: tests/qtest/device-introspect-test TEST check-qtest-avr: tests/qtest/machine-none-test TEST check-qtest-avr: tests/qtest/qmp-test TEST check-qtest-avr: tests/qtest/qmp-cmd-test TEST check-qtest-avr: tests/qtest/qom-test TEST check-qtest-avr: tests/qtest/test-hmp TEST check-qtest-avr: tests/qtest/qos-test CI results: . https://cirrus-ci.com/build/5697049146425344 . https://gitlab.com/philmd/qemu/-/pipelines/165328058 . https://travis-ci.org/github/philmd/qemu/builds/705817933 . https://app.shippable.com/github/philmd/qemu/runs/822/summary/console # gpg: Signature made Sat 11 Jul 2020 10:03:11 BST # gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE # gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full] # Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE * remotes/philmd-gitlab/tags/avr-port-20200711: (32 commits) target/avr/disas: Fix store instructions display order target/avr/cpu: Fix $PC displayed address target/avr/cpu: Drop tlb_flush() in avr_cpu_reset() target/avr: Add section into QEMU documentation tests/acceptance: Test the Arduino MEGA2560 board tests/boot-serial: Test some Arduino boards (AVR based) hw/avr: Add limited support for some Arduino boards hw/avr: Add some ATmega microcontrollers hw/avr: Add support for loading ELF/raw binaries hw/misc: avr: Add limited support for power reduction device hw/timer: avr: Add limited support for 16-bit timer peripheral hw/char: avr: Add limited support for USART peripheral tests/machine-none: Add AVR support target/avr: Register AVR support with the rest of QEMU target/avr: Add support for disassembling via option '-d in_asm' target/avr: Initialize TCG register variables target/avr: Add instruction translation - CPU main translation function target/avr: Add instruction translation - MCU Control Instructions target/avr: Add instruction translation - Bit and Bit-test Instructions target/avr: Add instruction translation - Data Transfer Instructions ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-07-11Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
* Make checkpatch say 'qemu' instead of 'kernel' (Aleksandar) * Fix PSE guests with emulated NPT (Alexander B. #1) * Fix leak (Alexander B. #2) * HVF fixes (Roman, Cameron) * New Sapphire Rapids CPUID bits (Cathy) * cpus.c and softmmu/ cleanups (Claudio) * TAP driver tweaks (Daniel, Havard) * object-add bugfix and testcases (Eric A.) * Fix Coverity MIN_CONST and MAX_CONST (Eric B.) * "info lapic" improvement (Jan) * SSE fixes (Joseph) * "-msg guest-name" option (Mario) * support for AMD nested live migration (myself) * Small i386 TCG fixes (myself) * improved error reporting for Xen (myself) * fix "-cpu host -overcommit cpu-pm=on" (myself) * Add accel/Kconfig (Philippe) * iscsi sense handling fixes (Yongji) * Misc bugfixes # gpg: Signature made Sat 11 Jul 2020 00:33:41 BST # gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83 # gpg: issuer "pbonzini@redhat.com" # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (47 commits) linux-headers: update again to 5.8 apic: Report current_count via 'info lapic' scripts: improve message when TAP based tests fail target/i386: Enable TSX Suspend Load Address Tracking feature target/i386: Add SERIALIZE cpu feature softmmu/vl: Remove the check for colons in -accel parameters cpu-throttle: new module, extracted from cpus.c softmmu: move softmmu only files from root pc: fix leak in pc_system_flash_cleanup_unused cpus: Move CPU code from exec.c to cpus-common.c target/i386: Correct the warning message of Intel PT checkpatch: Change occurences of 'kernel' to 'qemu' in user messages iscsi: return -EIO when sense fields are meaningless iscsi: handle check condition status in retry loop target/i386: sev: fail query-sev-capabilities if QEMU cannot use SEV target/i386: sev: provide proper error reporting for query-sev-capabilities KVM: x86: believe what KVM says about WAITPKG target/i386: implement undocumented "smsw r32" behavior target/i386: remove gen_io_end Makefile: simplify MINIKCONF rules ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-07-11Merge remote-tracking branch 'remotes/aperard/tags/pull-xen-20200710' into ↵Peter Maydell
staging xen patches Fixes following harden checks in qdev. # gpg: Signature made Fri 10 Jul 2020 14:05:46 BST # gpg: using RSA key F80C006308E22CFD8A92E7980CF5572FD7FB55AF # gpg: issuer "anthony.perard@citrix.com" # gpg: Good signature from "Anthony PERARD <anthony.perard@gmail.com>" [marginal] # gpg: aka "Anthony PERARD <anthony.perard@citrix.com>" [marginal] # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 5379 2F71 024C 600F 778A 7161 D8D5 7199 DF83 42C8 # Subkey fingerprint: F80C 0063 08E2 2CFD 8A92 E798 0CF5 572F D7FB 55AF * remotes/aperard/tags/pull-xen-20200710: xen: cleanup unrealized flash devices xen: Fix xen-legacy-backend qdev types Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-07-11hw/avr: Add support for loading ELF/raw binariesPhilippe Mathieu-Daudé
Add avr_load_firmware() function to load firmware in ELF or raw binary format. [AM: Corrected the type of the variable containing e_flags] [AM: Moved definition of e_flags conversion function to boot.c] Suggested-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com> Reviewed-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com> Signed-off-by: Thomas Huth <huth@tuxfamily.org> Message-Id: <20200705140315.260514-24-huth@tuxfamily.org> [PMD: Replace load_image_targphys() by load_image_mr()] Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2020-07-11hw/misc: avr: Add limited support for power reduction deviceMichael Rolnik
This is a simple device of just one register, and whenever this register is written to it calls qemu_set_irq function for each of 8 bits/IRQs. It is used to implement AVR Power Reduction. [AM: Remove word 'Atmel' from filenames and all elements of code] Suggested-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com> Signed-off-by: Michael Rolnik <mrolnik@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> [rth: Squash include fix and file rename from f4bug] Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Thomas Huth <huth@tuxfamily.org> Message-Id: <20200705140315.260514-22-huth@tuxfamily.org>
2020-07-11hw/timer: avr: Add limited support for 16-bit timer peripheralMichael Rolnik
These were designed to facilitate testing but should provide enough function to be useful in other contexts. Only a subset of the functions of each peripheral is implemented, mainly due to the lack of a standard way to handle electrical connections (like GPIO pins). [AM: Remove word 'Atmel' from filenames and all elements of code] Suggested-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com> Signed-off-by: Sarah Harris <S.E.Harris@kent.ac.uk> Signed-off-by: Ed Robbins <E.J.C.Robbins@kent.ac.uk> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> [rth: Squash info mtree fixes and a file rename from f4bug] Signed-off-by: Richard Henderson <richard.henderson@linaro.org> [PMD: Use qemu_log_mask(LOG_UNIMP), replace goto by return] Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Thomas Huth <huth@tuxfamily.org> Message-Id: <20200705140315.260514-21-huth@tuxfamily.org> [PMD: Check cpu-frequency-hz property in realize()] Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2020-07-11hw/char: avr: Add limited support for USART peripheralMichael Rolnik
These were designed to facilitate testing but should provide enough function to be useful in other contexts. Only a subset of the functions of each peripheral is implemented, mainly due to the lack of a standard way to handle electrical connections (like GPIO pins). [AM: Remove word 'Atmel' from filenames and all elements of code] Suggested-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com> Signed-off-by: Michael Rolnik <mrolnik@gmail.com> Signed-off-by: Sarah Harris <S.E.Harris@kent.ac.uk> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> [rth: Squash I/O size fix and file rename from f4bug] Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com> Reviewed-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com> Signed-off-by: Thomas Huth <huth@tuxfamily.org> Message-Id: <20200705140315.260514-20-huth@tuxfamily.org>
2020-07-11target/avr: Register AVR support with the rest of QEMUMichael Rolnik
Add AVR related definitions into QEMU, make AVR support buildable. [AM: Remove word 'Atmel' from filenames and all elements of code] Suggested-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com> Signed-off-by: Michael Rolnik <mrolnik@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Thomas Huth <huth@tuxfamily.org> Message-Id: <20200705140315.260514-23-huth@tuxfamily.org> [PMD: Fixed @avr tag in qapi/machine.json] Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2020-07-10apic: Report current_count via 'info lapic'Jan Kiszka
This is helpful when debugging stuck guest timers. As we need apic_get_current_count for that, and it is really not emulation specific, move it to apic_common.c and export it. Fix its style at this chance as well. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <e00e2896-ca5b-a929-de7a-8e5762f0c1c2@siemens.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-10cpu-throttle: new module, extracted from cpus.cClaudio Fontana
move the vcpu throttling functionality into its own module. This functionality is not specific to any accelerator, and it is used currently by migration to slow down guests to try to have migrations converge, and by the cocoa MacOS UI to throttle speed. cpu-throttle contains the controls to adjust and inspect throttle settings, start (set) and stop vcpu throttling, and the throttling function itself that is run periodically on vcpus to make them take a nap. Execution of the throttling function on all vcpus is triggered by a timer, registered at module initialization. No functionality change. Signed-off-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Laurent Vivier <lvivier@redhat.com> Message-Id: <20200629093504.3228-3-cfontana@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-10i386: hvf: Don't duplicate register resetRoman Bolshakov
hvf_reset_vcpu() duplicates actions performed by x86_cpu_reset(). The difference is that hvf_reset_vcpu() stores initial values directly to VMCS while x86_cpu_reset() stores it in CPUX86State and then cpu_synchronize_all_post_init() or cpu_synchronize_all_post_reset() flushes CPUX86State into VMCS. That makes hvf_reset_vcpu() a kind of no-op. Here's the trace of CPU state modifications during VM start: hvf_reset_vcpu (resets VMCS) cpu_synchronize_all_post_init (overwrites VMCS fields written by hvf_reset_vcpu()) cpu_synchronize_all_states hvf_reset_vcpu (resets VMCS) cpu_synchronize_all_post_reset (overwrites VMCS fields written by hvf_reset_vcpu()) General purpose registers, system registers, segment descriptors, flags and IP are set by hvf_put_segments() in post-init and post-reset, therefore it's safe to remove them from hvf_reset_vcpu(). PDPTE initialization can be dropped because Intel SDM (26.3.1.6 Checks on Guest Page-Directory-Pointer-Table Entries) doesn't require PDPTE to be clear unless PAE is used: "A VM entry to a guest that does not use PAE paging does not check the validity of any PDPTEs." And if PAE is used, PDPTE's are initialized from CR3 in macvm_set_cr0(). Cc: Cameron Esfahani <dirty@apple.com> Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com> Message-Id: <20200630102824.77604-8-r.bolshakov@yadro.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-10i386: hvf: Add hvf_cpu_synchronize_pre_loadvm()Roman Bolshakov
hvf lacks an implementation of cpu_synchronize_pre_loadvm(). Cc: Cameron Esfahani <dirty@apple.com> Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com> Message-Id: <20200630102824.77604-4-r.bolshakov@yadro.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-10i386: hvf: Move synchronize functions to sysemuRoman Bolshakov
Cc: Cameron Esfahani <dirty@apple.com> Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com> Message-Id: <20200630102824.77604-3-r.bolshakov@yadro.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-10coverity: provide Coverity-friendly MIN_CONST and MAX_CONSTEric Blake
Coverity has problems seeing through __builtin_choose_expr, which result in it abandoning analysis of later functions that utilize a definition that used MIN_CONST or MAX_CONST, such as in qemu-file.c: 50 DECLARE_BITMAP(may_free, MAX_IOV_SIZE); CID 1429992 (#1 of 1): Unrecoverable parse warning (PARSE_ERROR)1. expr_not_constant: expression must have a constant value As has been done in the past (see 07d66672), it's okay to dumb things down when compiling for static analyzers. (Of course, now the syntax-checker has a false positive on our reference to __COVERITY__...) Reported-by: Peter Maydell <peter.maydell@linaro.org> Fixes: CID 1429992, CID 1429995, CID 1429997, CID 1429999 Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20200629162804.1096180-1-eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-10qom: Introduce object_property_try_add_child()Eric Auger
object_property_add() does not allow object_property_try_add() to gracefully fail as &error_abort is passed as an error handle. However such failure can easily be triggered from the QMP shell when, for instance, one attempts to create an object with an id that already exists. This is achieved from the following call path: qmp_object_add -> user_creatable_add_dict -> user_creatable_add_type -> object_property_add_child -> object_property_add For instance, from the qmp-shell, call twice: object-add qom-type=memory-backend-ram id=mem1 props.size=1073741824 and QEMU aborts. This behavior is undesired as a user/management application mistake in reusing a property ID shouldn't result in loss of the VM and live data within. This patch introduces a new function, object_property_try_add_child() which takes an error handle and turn object_property_try_add() into a non-static one. Now the call path becomes: user_creatable_add_type -> object_property_try_add_child -> object_property_try_add and the error is returned gracefully to the QMP client. (QEMU) object-add qom-type=memory-backend-ram id=mem2 props.size=4294967296 {"return": {}} (QEMU) object-add qom-type=memory-backend-ram id=mem2 props.size=4294967296 {"error": {"class": "GenericError", "desc": "attempt to add duplicate property 'mem2' to object (type 'container')"}} Signed-off-by: Eric Auger <eric.auger@redhat.com> Fixes: d2623129a7de ("qom: Drop parameter @errp of object_property_add() & friends") Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Greg Kurz <groug@kaod.org> Tested-by: Greg Kurz <groug@kaod.org> Message-Id: <20200629193424.30280-2-eric.auger@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-10util/qemu-error: prepend guest name to error message to identify affected VM ↵Mario Smarduch
owner This is followup patch to the one submitted back in Oct, 19 https://lists.gnu.org/archive/html/qemu-devel/2019-10/msg02102.html My mistake here, I took my eyes of the mailing list after I got the initial thumbs up. This patch follows up on Markus comments in the above link. Purpose of this patch: We want to print guest name for errors, warnings and info messages. This was the first of two patches the second being MCE errors targeting a VM with guest name prepended. But in a large fleet we see many other errors that disable a VM or crash it. In a large fleet and centralized logging having the guest name enables identify of owner and customer. Signed-off-by: Mario Smarduch <msmarduch@digitalocean.com> Message-Id: <20200626201900.8876-1-msmarduch@digitalocean.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-10nbd: Use ERRP_GUARD()Vladimir Sementsov-Ogievskiy
If we want to check error after errp-function call, we need to introduce local_err and then propagate it to errp. Instead, use the ERRP_GUARD() macro, benefits are: 1. No need of explicit error_propagate call 2. No need of explicit local_err variable: use errp directly 3. ERRP_GUARD() leaves errp as is if it's not NULL or &error_fatal, this means that we don't break error_abort (we'll abort on error_set, not on error_propagate) If we want to add some info to errp (by error_prepend() or error_append_hint()), we must use the ERRP_GUARD() macro. Otherwise, this info will not be added when errp == &error_fatal (the program will exit prior to the error_append_hint() or error_prepend() call). Fix several such cases, e.g. in nbd_read(). This commit is generated by command sed -n '/^Network Block Device (NBD)$/,/^$/{s/^F: //p}' \ MAINTAINERS | \ xargs git ls-files | grep '\.[hc]$' | \ xargs spatch \ --sp-file scripts/coccinelle/errp-guard.cocci \ --macro-file scripts/cocci-macro-file.h \ --in-place --no-show-diff --max-width 80 Reported-by: Kevin Wolf <kwolf@redhat.com> Reported-by: Greg Kurz <groug@kaod.org> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200707165037.1026246-8-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [ERRP_AUTO_PROPAGATE() renamed to ERRP_GUARD(), and auto-propagated-errp.cocci to errp-guard.cocci. Commit message tweaked again.]
2020-07-10scripts: Coccinelle script to use ERRP_GUARD()Vladimir Sementsov-Ogievskiy
Script adds ERRP_GUARD() macro invocations where appropriate and does corresponding changes in code (look for details in include/qapi/error.h) Usage example: spatch --sp-file scripts/coccinelle/errp-guard.cocci \ --macro-file scripts/cocci-macro-file.h --in-place --no-show-diff \ --max-width 80 FILES... Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200707165037.1026246-3-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [ERRP_AUTO_PROPAGATE() renamed to ERRP_GUARD(), and auto-propagated-errp.cocci to errp-guard.cocci]
2020-07-10error: New macro ERRP_GUARD()Vladimir Sementsov-Ogievskiy
Introduce a new ERRP_GUARD() macro, to be used at start of functions with an errp OUT parameter. It has three goals: 1. Fix issue with error_fatal and error_prepend/error_append_hint: the user can't see this additional information, because exit() happens in error_setg earlier than information is added. [Reported by Greg Kurz] 2. Fix issue with error_abort and error_propagate: when we wrap error_abort by local_err+error_propagate, the resulting coredump will refer to error_propagate and not to the place where error happened. (the macro itself doesn't fix the issue, but it allows us to [3.] drop the local_err+error_propagate pattern, which will definitely fix the issue) [Reported by Kevin Wolf] 3. Drop local_err+error_propagate pattern, which is used to workaround void functions with errp parameter, when caller wants to know resulting status. (Note: actually these functions could be merely updated to return int error code). To achieve these goals, later patches will add invocations of this macro at the start of functions with either use error_prepend/error_append_hint (solving 1) or which use local_err+error_propagate to check errors, switching those functions to use *errp instead (solving 2 and 3). Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Paul Durrant <paul@xen.org> Reviewed-by: Greg Kurz <groug@kaod.org> Reviewed-by: Eric Blake <eblake@redhat.com> [Merge comments properly with recent commit "error: Document Error API usage rules", and edit for clarity. Put ERRP_AUTO_PROPAGATE() before its helpers, and touch up style. Tweak commit message.] Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200707165037.1026246-2-armbru@redhat.com> [Rename ERRP_AUTO_PROPAGATE() to ERRP_GUARD(), tweak commit message again]
2020-07-10qdev: Make functions taking Error ** return bool, not voidMarkus Armbruster
See recent commit "error: Document Error API usage rules" for rationale. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-32-armbru@redhat.com>
2020-07-10qom: Make functions taking Error ** return bool, not 0/-1Markus Armbruster
Just for consistency. Also fix the example in object_set_props()'s documentation. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-31-armbru@redhat.com>
2020-07-10qom: Make functions taking Error ** return bool, not voidMarkus Armbruster
See recent commit "error: Document Error API usage rules" for rationale. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-28-armbru@redhat.com>
2020-07-10qom: Put name parameter before value / visitor parameterMarkus Armbruster
The object_property_set_FOO() setters take property name and value in an unusual order: void object_property_set_FOO(Object *obj, FOO_TYPE value, const char *name, Error **errp) Having to pass value before name feels grating. Swap them. Same for object_property_set(), object_property_get(), and object_property_parse(). Convert callers with this Coccinelle script: @@ identifier fun = { object_property_get, object_property_parse, object_property_set_str, object_property_set_link, object_property_set_bool, object_property_set_int, object_property_set_uint, object_property_set, object_property_set_qobject }; expression obj, v, name, errp; @@ - fun(obj, v, name, errp) + fun(obj, name, v, errp) Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error message "no position information". Convert that one manually. Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Convert manually. Fails to convert hw/rx/rx-gdbsim.c, because Coccinelle gets confused by RXCPU being used both as typedef and function-like macro there. Convert manually. The other files using RXCPU that way don't need conversion. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-27-armbru@redhat.com> [Straightforwad conflict with commit 2336172d9b "audio: set default value for pcspk.iobase property" resolved]
2020-07-10qom: Use error_reportf_err() instead of g_printerr() in examplesMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-22-armbru@redhat.com>
2020-07-10qapi: Make visitor functions taking Error ** return bool, not voidMarkus Armbruster
See recent commit "error: Document Error API usage rules" for rationale. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-18-armbru@redhat.com>
2020-07-10qemu-option: Make functions taking Error ** return bool, not voidMarkus Armbruster
See recent commit "error: Document Error API usage rules" for rationale. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-14-armbru@redhat.com>
2020-07-10error: Document Error API usage rulesMarkus Armbruster
This merely codifies existing practice, with one exception: the rule advising against returning void, where existing practice is mixed. When the Error API was created, we adopted the (unwritten) rule to return void when the function returns no useful value on success, unlike GError, which recommends to return true on success and false on error then. When a function returns a distinct error value, say false, a checked call that passes the error up looks like if (!frobnicate(..., errp)) { handle the error... } When it returns void, we need Error *err = NULL; frobnicate(..., &err); if (err) { handle the error... error_propagate(errp, err); } Not only is this more verbose, it also creates an Error object even when @errp is null, &error_abort or &error_fatal. People got tired of the additional boilerplate, and started to ignore the unwritten rule. The result is confusion among developers about the preferred usage. Make the rule advising against returning void official by putting it in writing. This will hopefully reduce confusion. Update the examples accordingly. The remainder of this series will update a substantial amount of code to honor the rule. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Greg Kurz <groug@kaod.org> Message-Id: <20200707160613.848843-4-armbru@redhat.com> [Tweak prose as per advice from Eric]
2020-07-10error: Improve error.h's big commentMarkus Armbruster
Add headlines to the big comment. Explain examples for NULL, &error_abort and &error_fatal argument better. Tweak rationale for error_propagate_prepend(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200707160613.848843-3-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Greg Kurz <groug@kaod.org>
2020-07-10error: Fix examples in error.h's big commentMarkus Armbruster
Mark a bad example more clearly. Fix the error_propagate_prepend() example. Add a missing declaration and a second error pileup example. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Greg Kurz <groug@kaod.org> Message-Id: <20200707160613.848843-2-armbru@redhat.com>
2020-07-10xen: cleanup unrealized flash devicesPaul Durrant
The generic pc_machine_initfn() calls pc_system_flash_create() which creates 'system.flash0' and 'system.flash1' devices. These devices are then realized by pc_system_flash_map() which is called from pc_system_firmware_init() which itself is called via pc_memory_init(). The latter however is not called when xen_enable() is true and hence the following assertion fails: qemu-system-i386: hw/core/qdev.c:439: qdev_assert_realized_properly: Assertion `dev->realized' failed These flash devices are unneeded when using Xen so this patch avoids the assertion by simply removing them using pc_system_flash_cleanup_unused(). Reported-by: Jason Andryuk <jandryuk@gmail.com> Fixes: ebc29e1beab0 ("pc: Support firmware configuration with -blockdev") Signed-off-by: Paul Durrant <pdurrant@amazon.com> Tested-by: Jason Andryuk <jandryuk@gmail.com> Reviewed-by: Anthony PERARD <anthony.perard@citrix.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200624121841.17971-3-paul@xen.org> Fixes: dfe8c79c4468 ("qdev: Assert onboard devices all get realized properly") Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
2020-07-09Merge remote-tracking branch 'remotes/philmd-gitlab/tags/fw_cfg-20200704' ↵Peter Maydell
into staging firmware (and crypto) patches - add the tls-cipher-suites object, - add the ability to QOM objects to produce data consumable by the fw_cfg device, - let the tls-cipher-suites object implement the FW_CFG_DATA_GENERATOR interface. This is required by EDK2 'HTTPS Boot' feature of OVMF to tell the guest which TLS ciphers it can use. CI jobs results: https://travis-ci.org/github/philmd/qemu/builds/704724619 https://gitlab.com/philmd/qemu/-/pipelines/162938106 https://cirrus-ci.com/build/4682977303068672 # gpg: Signature made Sat 04 Jul 2020 17:37:08 BST # gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE # gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full] # Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE * remotes/philmd-gitlab/tags/fw_cfg-20200704: crypto/tls-cipher-suites: Produce fw_cfg consumable blob softmmu/vl: Allow -fw_cfg 'gen_id' option to use the 'etc/' namespace softmmu/vl: Let -fw_cfg option take a 'gen_id' argument hw/nvram/fw_cfg: Add the FW_CFG_DATA_GENERATOR interface crypto: Add tls-cipher-suites object Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-07-09Merge remote-tracking branch ↵Peter Maydell
'remotes/kraxel/tags/modules-20200707-pull-request' into staging qom: add support for qom objects in modules. build some devices (qxl, virtio-gpu, ccid, usb-redir) as modules. build braille chardev as module. v2: more verbose comment for "build: fix device module builds" patch. note: qemu doesn't rebuild objects on cflags changes (specifically -fPIC being added when code is switched from builtin to module). Workaround for resulting build errors: "make clean", rebuild. # gpg: Signature made Tue 07 Jul 2020 14:42:16 BST # gpg: using RSA key 4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full] # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full] # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full] # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/modules-20200707-pull-request: chardev: enable modules, use for braille vga: build virtio-gpu as module vga: build virtio-gpu only once vga: build qxl as module usb: build usb-redir as module ccid: build smartcard as module build: fix device module builds qdev: device module support object: qom module support module: qom module support Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-17 18:19:37 +0000