aboutsummaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2019-07-01aspeed: Link SCU to the watchdogJoel Stanley
The ast2500 uses the watchdog to reset the SDRAM controller. This operation is usually performed by u-boot's memory training procedure, and it is enabled by setting a bit in the SCU and then causing the watchdog to expire. Therefore, we need the watchdog to be able to access the SCU's register space. This causes the watchdog to not perform a system reset when the bit is set. In the future it could perform a reset of the SDMC model. Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190621065242.32535-1-joel@jms.id.au Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-01hw/misc/aspeed_xdma: New deviceEddie James
The XDMA engine embedded in the Aspeed SOCs performs PCI DMA operations between the SOC (acting as a BMC) and a host processor in a server. The XDMA engine exists on the AST2400, AST2500, and AST2600 SOCs, so enable it for all of those. Add trace events on the important register writes in the XDMA engine. Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20190618165311.27066-21-clg@kaod.org [clg: - changed title ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-01aspeed/smc: add a 'sdram_base' propertyCédric Le Goater
The DRAM address of a DMA transaction depends on the DRAM base address of the SoC. Inform the SMC controller model with this value. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190618165311.27066-15-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-01aspeed: add support for multiple NICsCédric Le Goater
The Aspeed SoCs have two MACs. Extend the Aspeed model to support a second NIC. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20190618165311.27066-7-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-01aspeed: introduce a configurable number of CPU per machineCédric Le Goater
The current models of the Aspeed SoCs only have one CPU but future ones will support SMP. Introduce a new num_cpus field at the SoC class level to define the number of available CPUs per SoC and also introduce a 'num-cpus' property to activate the CPUs configured for the machine. The max_cpus limit of the machine should depend on the SoC definition but, unfortunately, these values are not available when the machine class is initialized. This is the reason why we add a check on num_cpus in the AspeedSoC realize handler. SMP support will be activated when models for such SoCs are implemented. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20190618165311.27066-6-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-01hw/arm/aspeed: Add RTC to SoCJoel Stanley
All systems have an RTC. The IRQ is hooked up but the model does not use it at this stage. There is no guest code that uses it, so this limitation is acceptable. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20190618165311.27066-5-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-01hw: timer: Add ASPEED RTC deviceJoel Stanley
The RTC is modeled to provide time and date functionality. It is initialised at zero to match the hardware. There is no modelling of the alarm functionality, which includes the IRQ line. As there is no guest code to exercise this function that is acceptable for now. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20190618165311.27066-4-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-01aspeed: add a per SoC mapping for the memory spaceCédric Le Goater
This will simplify the definition of new SoCs, like the AST2600 which should use a slightly different address space and have a different set of controllers. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20190618165311.27066-3-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-01aspeed: add a per SoC mapping for the interrupt spaceCédric Le Goater
This will simplify the definition of new SoCs, like the AST2600 which should use a different CPU and a different IRQ number layout. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20190618165311.27066-2-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-01i.mx7d: pci: Update PCI IRQ mapping to match HWAndrey Smirnov
Datasheet for i.MX7 is incorrect and i.MX7's PCI IRQ mapping matches that of i.MX6: * INTD/MSI 122 * INTC 123 * INTB 124 * INTA 125 Fix all of the relevant code to reflect that fact. Needed by latest Linux kernels. (Reference: Linux kernel commit 538d6e9d597584e80 from an NXP employee confirming that the datasheet is incorrect and with a report of a test against hardware.) Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: qemu-devel@nongnu.org Cc: qemu-arm@nongnu.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: added ref to kernel commit confirming the datasheet error] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-01i.mx7d: Add no-op/unimplemented PCIE PHY IP blockAndrey Smirnov
Add no-op/unimplemented PCIE PHY IP block. Needed by new kernels to use PCIE. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: qemu-devel@nongnu.org Cc: qemu-arm@nongnu.org Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-01i.mx7d: Add no-op/unimplemented APBH DMA moduleAndrey Smirnov
Instantiate no-op APBH DMA module. Needed to boot latest Linux kernel. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: qemu-devel@nongnu.org Cc: qemu-arm@nongnu.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-01pcie: minor cleanups for slot control/statusMichael S. Tsirkin
Rename function arguments to make intent clearer. Better documentation for slot control logic. Suggested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2019-07-01pcie: check that slt ctrl changed before deletingMichael S. Tsirkin
During boot, linux would sometimes overwrites control of a powered off slot before powering it on. Unfortunately QEMU interprets that as a power off request and ejects the device. For example: /x86_64-softmmu/qemu-system-x86_64 -enable-kvm -S -machine q35 \ -device pcie-root-port,id=pcie_root_port_0,slot=2,chassis=2,addr=0x2,bus=pcie.0 \ -monitor stdio disk.qcow2 (qemu)device_add virtio-balloon-pci,id=balloon,bus=pcie_root_port_0 (qemu)cont Balloon is deleted during guest boot. To fix, save control beforehand and check that power or led state actually change before ejecting. Note: this is more a hack than a solution, ideally we'd find a better way to detect ejects, or move away from ejects completely and instead monitor whether it's safe to delete device due to e.g. its power state. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com>
2019-06-28i2c: Move bitbang_i2c.h to include/hw/i2c/BALATON Zoltan
The bitbang i2c implementation is also useful for other device models such as DDC in display controllers. Move the header to include/hw/i2c/ to allow it to be used from other device models and adjust users of this include. This also reverts commit 2b4c1125ac which is no longer needed. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Corey Minyard <cminyard@mvista.com> Message-id: 5d1fe4db846ab9be4b77ddb0d43cc74cd200a003.1561028123.git.balaton@eik.bme.hu Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-06-27hw/riscv: Add support for loading a firmwareAlistair Francis
Add support for loading a firmware file for the virt machine and the SiFive U. This can be run with the following command: qemu-system-riscv64 -machine virt -bios fw_jump.bin -kernel vmlinux Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-06-27hw/riscv: Split out the boot functionsAlistair Francis
Split the common RISC-V boot functions into a seperate file. This allows us to share the common code. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-06-24vfio-ccw: support async command subregionCornelia Huck
A vfio-ccw device may provide an async command subregion for issuing halt/clear subchannel requests. If it is present, use it for sending halt/clear request to the device; if not, fall back to emulation (as done today). Reviewed-by: Farhan Ali <alifm@linux.ibm.com> Message-Id: <20190613092542.2834-1-cohuck@redhat.com> Reviewed-by: Eric Farman <farman@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-06-24xen: Import other xen/io/*.hAnthony PERARD
A Xen public header have been imported into QEMU (by f65eadb639 "xen: import ring.h from xen"), but there are other header that depends on ring.h which come from the system when building QEMU. This patch resolves the issue of having headers from the system importing a different copie of ring.h. This patch is prompt by the build issue described in the previous patch: 'Revert xen/io/ring.h of "Clean up a few header guard symbols"' ring.h and the new imported headers are moved to "include/hw/xen/interface" as those describe interfaces with a guest. The imported headers are cleaned up a bit while importing them: some part of the file that QEMU doesn't use are removed (description of how to make hypercall in grant_table.h have been removed). Other cleanup: - xen-mapcache.c and xen-legacy-backend.c don't need grant_table.h. - xenfb.c doesn't need event_channel.h. Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Paul Durrant <paul.durrant@citrix.com> Message-Id: <20190621105441.3025-3-anthony.perard@citrix.com>
2019-06-24Revert xen/io/ring.h of "Clean up a few header guard symbols"Anthony PERARD
This reverts changes to include/hw/xen/io/ring.h from commit 37677d7db39a3c250ad661d00fb7c3b59d047b1f. Following 37677d7db3 "Clean up a few header guard symbols", QEMU start to fail to build: In file included from ~/xen/tools/../tools/include/xen/io/blkif.h:31:0, from ~/xen/tools/qemu-xen-dir/hw/block/xen_blkif.h:5, from ~/xen/tools/qemu-xen-dir/hw/block/xen-block.c:22: ~/xen/tools/../tools/include/xen/io/ring.h:68:0: error: "__CONST_RING_SIZE" redefined [-Werror] #define __CONST_RING_SIZE(_s, _sz) \ In file included from ~/xen/tools/qemu-xen-dir/hw/block/xen_blkif.h:4:0, from ~/xen/tools/qemu-xen-dir/hw/block/xen-block.c:22: ~/xen/tools/qemu-xen-dir/include/hw/xen/io/ring.h:66:0: note: this is the location of the previous definition #define __CONST_RING_SIZE(_s, _sz) \ The issue is that some public xen headers have been imported (by f65eadb639 "xen: import ring.h from xen") but not all. With the change in the guards symbole, the ring.h header start to be imported twice. Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Paul Durrant <paul.durrant@citrix.com> Message-Id: <20190621105441.3025-2-anthony.perard@citrix.com>
2019-06-24xen-bus / xen-block: add support for event channel pollingPaul Durrant
This patch introduces a poll callback for event channel fd-s and uses this to invoke the channel callback function. To properly support polling, it is necessary for the event channel callback function to return a boolean saying whether it has done any useful work or not. Thus xen_block_dataplane_event() is modified to directly invoke xen_block_handle_requests() and the latter only returns true if it actually processes any requests. This also means that the call to qemu_bh_schedule() is moved into xen_block_complete_aio(), which is more intuitive since the only reason for doing a deferred poll of the shared ring should be because there were previously insufficient resources to fully complete a previous poll. Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Reviewed-by: Anthony PERARD <anthony.perard@citrix.com> Message-Id: <20190408151617.13025-4-paul.durrant@citrix.com> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
2019-06-24xen-bus: allow AioContext to be specified for each event channelPaul Durrant
This patch adds an AioContext parameter to xen_device_bind_event_channel() and then uses aio_set_fd_handler() to set the callback rather than qemu_set_fd_handler(). Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Reviewed-by: Anthony PERARD <anthony.perard@citrix.com> Message-Id: <20190408151617.13025-3-paul.durrant@citrix.com> [Call aio_set_fd_handler() with is_external=true] Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
2019-06-24xen-bus: use a separate fd for each event channelPaul Durrant
To better support use of IOThread-s it will be necessary to be able to set the AioContext for each XenEventChannel and hence it is necessary to open a separate handle to libxenevtchan for each channel. This patch stops using NotifierList for event channel callbacks, replacing that construct by a list of complete XenEventChannel structures. Each of these now has a xenevtchn_handle pointer in place of the single pointer previously held in the XenDevice structure. The individual handles are opened/closed in xen_device_bind/unbind_event_channel(), replacing the single open/close in xen_device_realize/unrealize(). NOTE: This patch does not add an AioContext parameter to xen_device_bind_event_channel(). That will be done in a subsequent patch. Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Reviewed-by: Anthony PERARD <anthony.perard@citrix.com> Message-Id: <20190408151617.13025-2-paul.durrant@citrix.com> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
2019-06-23RISC-V: Fix a memory leak when realizing a sifive_ePalmer Dabbelt
Coverity pointed out a memory leak in riscv_sifive_e_soc_realize(), where a pair of recently added MemoryRegion instances would not be freed if there were errors elsewhere in the function. The fix here is to simply not use dynamic allocation for these instances: there's always one of each in SiFiveESoCState, so instead we just include them within the struct. Fixes: 30efbf330a45 ("SiFive RISC-V GPIO Device") Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Suggested-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
2019-06-23sifive_prci: Read and write PRCI registersNathaniel Graff
Writes to the SiFive PRCI registers are preserved while leaving the ready bits set for the HFX/HFR oscillators and the lock bit set for the PLL. Signed-off-by: Nathaniel Graff <nathaniel.graff@sifive.com> Reviewed-by: Michael Clark <mjc@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-06-21hw: Nuke hw_compat_4_0_1 and pc_compat_4_0_1Greg Kurz
Commit c87759ce876a fixed a regression affecting pc-q35 machines by introducing a new pc-q35-4.0.1 machine version to be used instead of pc-q35-4.0. The only purpose was to revert the default behaviour of not using split irqchip, but the change also introduced the usual hw_compat and pc_compat bits, and wired them for pc-q35 only. This raises questions when it comes to add new compat properties for 4.0* machine versions of any architecture. Where to add them ? In 4.0, 4.0.1 or both ? Error prone. Another possibility would be to teach all other architectures about 4.0.1. This solution isn't satisfying, especially since this is a pc-q35 specific issue. It turns out that the split irqchip default is handled in the machine option function and doesn't involve compat lists at all. Drop all the 4.0.1 compat lists and use the 4.0 ones instead in the 4.0.1 machine option function. Move the compat props that were added to the 4.0.1 since c87759ce876a to 4.0. Even if only hw_compat_4_0_1 had an impact on other architectures, drop pc_compat_4_0_1 as well for consistency. Fixes: c87759ce876a "q35: Revert to kernel irqchip" Suggested-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <156051774276.244890.8660277280145466396.stgit@bahia.lan> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-06-21target/i386: kvm: Add support for save and restore nested stateLiran Alon
Kernel commit 8fcc4b5923af ("kvm: nVMX: Introduce KVM_CAP_NESTED_STATE") introduced new IOCTLs to extract and restore vCPU state related to Intel VMX & AMD SVM. Utilize these IOCTLs to add support for migration of VMs which are running nested hypervisors. Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com> Reviewed-by: Maran Wilson <maran.wilson@oracle.com> Tested-by: Maran Wilson <maran.wilson@oracle.com> Signed-off-by: Liran Alon <liran.alon@oracle.com> Message-Id: <20190619162140.133674-9-liran.alon@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-06-21vmstate: Add support for kernel integer typesLiran Alon
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com> Reviewed-by: Maran Wilson <maran.wilson@oracle.com> Signed-off-by: Liran Alon <liran.alon@oracle.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20190619162140.133674-8-liran.alon@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-06-21KVM: Introduce kvm_arch_destroy_vcpu()Liran Alon
Simiar to how kvm_init_vcpu() calls kvm_arch_init_vcpu() to perform arch-dependent initialisation, introduce kvm_arch_destroy_vcpu() to be called from kvm_destroy_vcpu() to perform arch-dependent destruction. This was added because some architectures (Such as i386) currently do not free memory that it have allocated in kvm_arch_init_vcpu(). Suggested-by: Maran Wilson <maran.wilson@oracle.com> Reviewed-by: Maran Wilson <maran.wilson@oracle.com> Signed-off-by: Liran Alon <liran.alon@oracle.com> Message-Id: <20190619162140.133674-3-liran.alon@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-06-18block: Add bdrv_child_refresh_perms()Max Reitz
If a block node uses bdrv_child_try_set_perm() to change the permission it takes on its child, the result may be very short-lived. If anything makes the block layer recalculate the permissions internally, it will invoke the node driver's .bdrv_child_perm() implementation. The permission/shared permissions masks that returns will then override the values previously passed to bdrv_child_try_set_perm(). If drivers want a child edge to have specific values for the permissions/shared permissions mask, it must return them in .bdrv_child_perm(). Consequentially, there is no need for them to pass the same values to bdrv_child_try_set_perm() then: It is better to have a function that invokes .bdrv_child_perm() and calls bdrv_child_try_set_perm() with the result. This patch adds such a function under the name of bdrv_child_refresh_perms(). Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-06-18block: drop bs->jobVladimir Sementsov-Ogievskiy
Drop remaining users of bs->job: 1. assertions actually duplicated by assert(!bs->refcnt) 2. trace-point seems not enough reason to change stream_start to return BlockJob pointer 3. Restricting creation of two jobs based on same bs is bad idea, as 3.1 Some jobs creates filters to be their main node, so, this check don't actually prevent creating second job on same real node (which will create another filter node) (but I hope it is restricted by other mechanisms) 3.2 Even without bs->job we have two systems of permissions: op-blockers and BLK_PERM 3.3 We may want to run several jobs on one node one day And finally, drop bs->job pointer itself. Hurrah! Suggested-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-06-18blockdev: blockdev_mark_auto_del: drop usage of bs->jobVladimir Sementsov-Ogievskiy
We are going to remove bs->job pointer. Drop it's usage in blockdev_mark_auto_del: instead of looking at bs->job let's check all jobs for references to bs. Suggested-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-06-18block/replication: drop usage of bs->jobVladimir Sementsov-Ogievskiy
We are going to remove bs->job pointer. Drop it's usage in replication code. Additionally we have to return job pointer from some mirror APIs. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-06-18monitor: Replace monitor_init() with monitor_init_{hmp, qmp}()Kevin Wolf
Most callers know which monitor type they want to have. Instead of calling monitor_init() with flags that can describe both types of monitors, make monitor_init_{hmp,qmp}() public interfaces that take specific bools instead of flags and call these functions directly. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20190613153405.24769-15-kwolf@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2019-06-18monitor: Split out monitor/monitor.cKevin Wolf
Move the monitor core infrastructure from monitor/misc.c to monitor/monitor.c. This is code that can be shared for all targets, so compile it only once. What remains in monitor/misc.c after this patch is mostly monitor command implementations (which could move to hmp-cmds.c or qmp-cmds.c later) and code that requires a system emulator or is even target-dependent (including HMP command completion code). The amount of function and particularly extern variables in monitor_int.h is probably a bit larger than it needs to be, but this way no non-trivial code modifications are needed. The interfaces between all monitor parts can be cleaned up later. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20190613153405.24769-13-kwolf@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Superfluous #include dropped] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2019-06-17monitor: Create MonitorHMP with readline stateKevin Wolf
The ReadLineState in Monitor is only used for HMP monitors. Create MonitorHMP and move it there. Can't use container_of() in hmp_change(). Cast instead, and mark FIXME. Will be cleaned up shortly. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20190613153405.24769-5-kwolf@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Superfluous variable in monitor_data_destroy() eliminated, whitespace tweaked in hmp_change(), commit message improved] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2019-06-17monitor: Fix return type of monitor_fdset_dup_fd_findYury Kotov
monitor_fdset_dup_fd_find_remove() and monitor_fdset_dup_fd_find() return mon_fdset->id which is int64_t. Downcasting from int64_t to int leads to a bug with removing fd from fdset with id >= 2^32. So, fix return types for these function. Signed-off-by: Yury Kotov <yury-kotov@yandex-team.ru> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523094433.30297-1-yury-kotov@yandex-team.ru> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2019-06-17hw/arm: Correctly disable FPU/DSP for some ARMSSE-based boardsPeter Maydell
The SSE-200 hardware has configurable integration settings which determine whether its two CPUs have the FPU and DSP: * CPU0_FPU (default 0) * CPU0_DSP (default 0) * CPU1_FPU (default 1) * CPU1_DSP (default 1) Similarly, the IoTKit has settings for its single CPU: * CPU0_FPU (default 1) * CPU0_DSP (default 1) Of our four boards that use either the IoTKit or the SSE-200: * mps2-an505, mps2-an521 and musca-a use the default settings * musca-b1 enables FPU and DSP on both CPUs Currently QEMU models all these boards using CPUs with both FPU and DSP enabled. This means that we are incorrect for mps2-an521 and musca-a, which should not have FPU or DSP on CPU0. Create QOM properties on the ARMSSE devices corresponding to the default h/w integration settings, and make the Musca-B1 board enable FPU and DSP on both CPUs. This fixes the mps2-an521 and musca-a behaviour, and leaves the musca-b1 and mps2-an505 behaviour unchanged. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20190517174046.11146-5-peter.maydell@linaro.org
2019-06-17hw/arm/armv7m: Forward "vfp" and "dsp" properties to CPUPeter Maydell
Create "vfp" and "dsp" properties on the armv7m container object which will be forwarded to its CPU object, so that SoCs can configure whether the CPU has these features. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20190517174046.11146-4-peter.maydell@linaro.org
2019-06-16hw/acpi: extract acpi_add_rom_blob()Wei Yang
arm and i386 has almost the same function acpi_add_rom_blob(), except giving different FWCfgCallback function. This patch moves acpi_add_rom_blob() to utils.c by passing FWCfgCallback to it. Signed-off-by: Wei Yang <richardw.yang@linux.intel.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> v7: * rebase on top of current master because of conflict v6: * change author from Igor to Michael v5: * remove unnecessary header glib/gprintf.h * rearrange include header to make it more suitable v4: * extract -> moves * adjust comment in source to make checkpatch happy v3: * put acpi_add_rom_blob() to hw/acpi/utils.c v2: * remove unused header in original source file Message-Id: <20190610011830.28398-1-richardw.yang@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-06-13vfio/common: Introduce vfio_set_irq_signaling helperEric Auger
The code used to assign an interrupt index/subindex to an eventfd is duplicated many times. Let's introduce an helper that allows to set/unset the signaling for an ACTION_TRIGGER, ACTION_MASK or ACTION_UNMASK action. In the error message, we now use errno in case of any VFIO_DEVICE_SET_IRQS ioctl failure. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Li Qiang <liq3ea@gmail.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2019-06-13Merge remote-tracking branch 'remotes/kraxel/tags/vga-20190613-pull-request' ↵Peter Maydell
into staging edid: add xmax + ymax properties, enable by default. # gpg: Signature made Thu 13 Jun 2019 08:38:18 BST # gpg: using RSA key 4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full] # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full] # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full] # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/vga-20190613-pull-request: edid: flip the default to enabled edid: add xmax + ymax properties Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-06-13edid: flip the default to enabledGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20190607083444.32175-1-kraxel@redhat.com
2019-06-13edid: add xmax + ymax propertiesGerd Hoffmann
Add new properties to allow setting the maximum display resolution. Resolutions larger than that will not be included in the mode list. In linux guests xrandr can be used to list modes. Note: The existing xres and yres properties set the preferred display resolution, i.e. the mode should be first in the mode list and guests should use it by default. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20190607083429.31943-1-kraxel@redhat.com
2019-06-12semihosting: split console_out into string and char versionsAlex Bennée
This is ostensibly to avoid the weirdness of len looking like it might come from a guest and sometimes being used. While we are at it fix up the error checking for the arm-linux-user implementation of the API which got flagged up by Coverity (CID 1401700). Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-06-12Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-4.1-20190612' ↵Peter Maydell
into staging ppc patch queue 2019-06-12 Next pull request against qemu-4.1. The big thing here is adding support for hot plug of P2P bridges, and PCI devices under P2P bridges on the "pseries" machine (which doesn't use SHPC). Other than that there's just a handful of fixes and small enhancements. # gpg: Signature made Wed 12 Jun 2019 06:47:56 BST # gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392 # gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full] # gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full] # gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full] # gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown] # Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392 * remotes/dgibson/tags/ppc-for-4.1-20190612: ppc/xive: Make XIVE generate the proper interrupt types ppc/pnv: activate the "dumpdtb" option on the powernv machine target/ppc: Use tcg_gen_gvec_bitsel spapr: Allow hot plug/unplug of PCI bridges and devices under PCI bridges spapr: Direct all PCI hotplug to host bridge, rather than P2P bridge spapr: Don't use bus number for building DRC ids spapr: Clean up DRC index construction spapr: Clean up spapr_drc_populate_dt() spapr: Clean up dt creation for PCI buses spapr: Clean up device tree construction for PCI devices spapr: Clean up device node name generation for PCI devices target/ppc: Fix lxvw4x, lxvh8x and lxvb16x spapr_pci: Improve error message Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-06-12Supply missing header guardsMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190604181618.19980-5-armbru@redhat.com>
2019-06-12Clean up a few header guard symbolsMarkus Armbruster
Commit 58ea30f5145 "Clean up header guards that don't match their file name" messed up contrib/elf2dmp/qemu_elf.h and tests/migration/migration-test.h. It missed target/cris/opcode-cris.h and tests/uefi-test-tools/UefiTestToolsPkg/Include/Guid/BiosTablesTest.h due to the scripts/clean-header-guards.pl bug fixed in the previous commit. Commit a8b991b52dc "Clean up ill-advised or unusual header guards" missed include/hw/xen/io/ring.h for the same reason. Commit 3979fca4b69 "disas: Rename include/disas/bfd.h back to include/disas/dis-asm.h" neglected to update the guard symbol for the rename. Commit a331c6d7741 "semihosting: implement a semihosting console" created include/hw/semihosting/console.h with an ill-advised guard symbol. Clean them up. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190604181618.19980-4-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-06-12Normalize position of header guardMarkus Armbruster
This is the common header guard idiom: /* * File comment */ #ifndef GUARD_SYMBOL_H #define GUARD_SYMBOL_H ... actual contents ... #endif A few of our headers have some #include before the guard. target/tilegx/spr_def_64.h has #ifndef __DOXYGEN__ outside the guard. A few more have the #define elsewhere. Change them to match the common idiom. For spr_def_64.h, that means dropping #ifndef __DOXYGEN__. While there, rename guard symbols to make scripts/clean-header-guards.pl happy. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190604181618.19980-2-armbru@redhat.com> [Rebased with conflicts resolved automatically]
2019-06-12Include qemu-common.h exactly where neededMarkus Armbruster
No header includes qemu-common.h after this commit, as prescribed by qemu-common.h's file comment. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-5-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and net/tap-bsd.c fixed up]
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-15 07:52:09 +0000