aboutsummaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2016-07-20target-i386: Fill high bits of mtrr maskDr. David Alan Gilbert
Fill the bits between 51..number-of-physical-address-bits in the MTRR_PHYSMASKn variable range mtrr masks so that they're consistent in the migration stream irrespective of the physical address space of the source VM in a migration. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-07-19disas: Fix ATTRIBUTE_UNUSED define clash with ALSA headersPeter Maydell
disas/bfd.h defines ATTRIBUTE_UNUSED, but unfortunately the ALSA system headers also define this macro, which means that you can get a compilation failure if building with ALSA and any files happen to include the alsa headers before bfd.h rather than the other way around. This is unfortunate namespace pollution by the ALSA headers but we can work around it. Add an #ifndef guard to bfd.h and remove the unnecessary extra definition in disas/arm.c to fix this. Reported-by: BALATON Zoltan <balaton@eik.bme.hu> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1468937076-21503-1-git-send-email-peter.maydell@linaro.org
2016-07-19Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
* two old patches from prospective GSoC students * i386 -kernel device tree support * Coverity fix * memory usage improvement from Peter * checkpatch fix * g_path_get_dirname cleanup * caching of block status for iSCSI # gpg: Signature made Tue 19 Jul 2016 07:43:41 BST # gpg: using RSA key 0xBFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: target-i386: Remove redundant HF_SOFTMMU_MASK block/iscsi: allow caching of the allocation map block/iscsi: fix rounding in iscsi_allocationmap_set Move README to markdown cpu-exec: Move down some declarations in cpu_exec() exec: avoid realloc in phys_map_node_reserve checkpatch: consider git extended headers valid patches megasas: remove useless check for cmd->frame compiler: never omit assertions if using a static analysis tool hw/i386: add device tree support Changed malloc to g_malloc, free to g_free in bsd-user/qemu.h use g_path_get_dirname instead of dirname Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-07-19Merge remote-tracking branch 'remotes/jnsnow/tags/ide-pull-request' into stagingPeter Maydell
# gpg: Signature made Mon 18 Jul 2016 23:53:15 BST # gpg: using RSA key 0x7DEF8106AAFC390E # gpg: Good signature from "John Snow (John Huston) <jsnow@redhat.com>" # Primary key fingerprint: FAEB 9711 A12C F475 812F 18F2 88A9 064D 1835 61EB # Subkey fingerprint: F9B7 ABDB BCAC DF95 BE76 CBD0 7DEF 8106 AAFC 390E * remotes/jnsnow/tags/ide-pull-request: block: ignore flush requests when storage is clean tests: in IDE and AHCI tests perform DMA write before flushing ide: set retry_unit for PIO and FLUSH requests ide: refactor retry_unit set and clear into separate function Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-07-19Merge remote-tracking branch 'remotes/stefanha/tags/tracing-pull-request' ↵Peter Maydell
into staging # gpg: Signature made Mon 18 Jul 2016 22:59:55 BST # gpg: using RSA key 0x9CA4ABB381AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" # Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8 * remotes/stefanha/tags/tracing-pull-request: trace: Add QAPI/QMP interfaces to query and control per-vCPU tracing state trace: Allow event name pattern in "info trace-events" trace: Conditionally trace events based on their per-vCPU state trace: Add per-vCPU tracing states for events with the 'vcpu' property trace: Cosmetic changes on fast-path tracing disas: Remove unused macro '_' trace: Identify events with the 'vcpu' property trace: [bsd-user] Commandline arguments to control tracing trace: [linux-user] Commandline arguments to control tracing Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-07-18block: ignore flush requests when storage is cleanEvgeny Yakovlev
Some guests (win2008 server for example) do a lot of unnecessary flushing when underlying media has not changed. This adds additional overhead on host when calling fsync/fdatasync. This change introduces a write generation scheme in BlockDriverState. Current write generation is checked against last flushed generation to avoid unnessesary flushes. The problem with excessive flushing was found by a performance test which does parallel directory tree creation (from 2 processes). Results improved from 0.424 loops/sec to 0.432 loops/sec. Each loop creates 10^3 directories with 10 files in each. This affected some blkdebug testcases that were expecting error logs from failure-injected flushes which are now skipped entirely (tests 026 071 089). This also affects the performance of block jobs and thus BLOCK_JOB_READY events for driver-mirror and active block-commit commands now arrives faster, before QMP send successfully returns to caller (tests 141 144). Signed-off-by: Evgeny Yakovlev <eyakovlev@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1468870792-7411-5-git-send-email-den@openvz.org CC: Kevin Wolf <kwolf@redhat.com> CC: Max Reitz <mreitz@redhat.com> CC: Stefan Hajnoczi <stefanha@redhat.com> CC: Fam Zheng <famz@redhat.com> CC: John Snow <jsnow@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com>
2016-07-18trace: Add per-vCPU tracing states for events with the 'vcpu' propertyLluís Vilanova
Each vCPU gets a 'trace_dstate' bitmap to control the per-vCPU dynamic tracing state of events with the 'vcpu' property. Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-07-18disas: Remove unused macro '_'Lluís Vilanova
Eliminates a future compilation error when UI code includes the tracing headers (indirectly pulling "disas/bfd.h" through "qom/cpu.h") and GLib's i18n '_' macro. Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-07-18aio-posix: remove useless parameterCao jin
Parameter **errp of aio_context_setup() is useless, remove it and clean up the related code. Cc: Stefan Hajnoczi <stefanha@redhat.com> Cc: Fam Zheng <famz@redhat.com> Cc: Eric Blake <eblake@redhat.com> Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1468578524-23433-1-git-send-email-caoj.fnst@cn.fujitsu.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-07-18linux-aio: share one LinuxAioState within an AioContextPaolo Bonzini
This has better performance because it executes fewer system calls and does not use a bottom half per disk. Originally proposed by Ming Lei. [Changed #include "raw-aio.h" to "block/raw-aio.h" in win32-aio.c to fix build error as reported by Peter Maydell <peter.maydell@linaro.org>. --Stefan] Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1467650000-51385-1-git-send-email-pbonzini@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> squash! linux-aio: share one LinuxAioState within an AioContext
2016-07-17compiler: never omit assertions if using a static analysis toolPaolo Bonzini
Assertions help both Coverity and the clang static analyzer avoid false positives, but on the other hand both are confused when the condition is compiled as (void)(x != FOO). Always expand assertion macros when using Coverity or clang, through a new QEMU_STATIC_ANALYSIS preprocessor symbol. This fixes a couple false positives in TCG. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-07-14Merge remote-tracking branch ↵Peter Maydell
'remotes/pmaydell/tags/pull-target-arm-20160714' into staging target-arm queue: * add virtio-mmio transport base address to device path (avoid an assertion failure with multiple virtio-scsi-devices) * revert hw/ptimer commit 5a50307 which causes regressions on SPARC guests * use Neon to accelerate zero-page checking on AArch64 hosts * set the MPIDR for TCG to match how KVM does it (and fit with GICv2/GICv3 restrictions on SGI target lists) * add some missing AArch32 TLBI hypervisor TLB operations * m25p80: Fix QIOR/DIOR handling for Winbond * hw/misc: fix typo in Aspeed SCU hw-strap2 property name * ast2400: pretend DMAs are done for U-boot * ast2400: some minor code cleanups # gpg: Signature made Thu 14 Jul 2016 17:21:30 BST # gpg: using RSA key 0x3C2525ED14360CDE # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" # gpg: aka "Peter Maydell <pmaydell@gmail.com>" # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * remotes/pmaydell/tags/pull-target-arm-20160714: ast2400: externalize revision numbers ast2400: pretend DMAs are done for U-boot ast2400: replace aspeed_smc_is_implemented() hw/misc: fix typo in Aspeed SCU hw-strap2 property name m25p80: Fix QIOR/DIOR handling for Winbond target-arm: Add missed AArch32 TLBI sytem registers hw/arm/virt: tcg: adjust MPIDR like KVM gic: provide defines for v2/v3 targetlist sizes target-arm: Use Neon for zero checking Revert "hw/ptimer: Perform counter wrap around if timer already expired" virtio-mmio: format transport base address in BusClass.get_dev_path Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-07-14ast2400: externalize revision numbersCédric Le Goater
AST2400_A0_SILICON_REV is defined twice. Fix this by including the definition in the header file as well as the routine to check if a silicon revision is supported. It will useful to reuse in other controllers. Let's add also AST2500_A0_SILICON_REV for future use. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 1467994016-11678-5-git-send-email-clg@kaod.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-07-14gic: provide defines for v2/v3 targetlist sizesAndrew Jones
Signed-off-by: Andrew Jones <drjones@redhat.com> Message-id: 1467378129-23302-2-git-send-email-drjones@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-07-14virtio-mmio: format transport base address in BusClass.get_dev_pathLaszlo Ersek
At the moment the following QEMU command line triggers an assertion failure (minimal reproducer by Cole): qemu-system-aarch64 \ -machine virt-2.6,accel=tcg \ -nodefaults \ -no-user-config \ -nographic -monitor stdio \ -device virtio-scsi-device,id=scsi0 \ -device virtio-scsi-device,id=scsi1 \ -drive file=foo.img,format=raw,if=none,id=d0 \ -device scsi-hd,bus=scsi0.0,drive=d0 \ -drive file=foo.img,format=raw,if=none,id=d1 \ -device scsi-hd,bus=scsi1.0,drive=d1 qemu-system-aarch64: migration/savevm.c:615: vmstate_register_with_alias_id: Assertion `!se->compat || se->instance_id == 0' failed. The reason is that the vmstate sections for the two scsi-hd devices are not uniquely identifiable by name. The direct parent buses of the scsi-hd devices -- scsi0.0 and scsi1.0 -- support the BusClass.get_dev_path member function. scsibus_get_dev_path() formats a device path prefix with the help of its topologically parent bus, and then appends the chan:id:lun triplet to it. For both scsi-hd devices, this triplet is 0:0:0. (Here we use "device path" in the QEMU migration sense, for vmstate section identification, not in the OFW or UEFI device path senses.) The virtio-scsi HBA is plugged into the virtio-mmio bus (implemented by the internal VirtIOMMIOProxy device). This bus class (TYPE_VIRTIO_MMIO_BUS) inherits, as its get_dev_path() member function, the virtio_bus_get_dev_path() method from its parent class (TYPE_VIRTIO_BUS). virtio_bus_get_dev_path() does not format any kind of device address on its own; "virtio addresses" are transport-specific. Therefore virtio_bus_get_dev_path() asks the topologically parent bus of the proxy object (implementing the specific virtio transport) to format the address of the proxy object. (For virtio-pci devices (where the proxy is an instance of VirtIOPCIProxy, plugged into a PCI bus), this ends up in pcibus_get_dev_path().) However, VirtIOMMIOProxy is usually (in practice: always) plugged into "main-system-bus", the singleton TYPE_SYSTEM_BUS object. This BusClass does not support formatting QEMU vmstate device paths at all (as SysBusDevice objects can have zero or more IO ports and zero or more MMIO regions). Hence the formatting request delegated from virtio_bus_get_dev_path() gets answered with NULL. The end result is that the two scsi-hd devices end up with the same device path "0:0:0", which triggers the assert. We can solve this by recognizing that virtio-mmio transports are distinguished from each other by their base addresses in MMIO address space. Implement virtio_mmio_bus_get_dev_path() as follows: (1) The virtio device whose devpath is to be formatted resides on a virtio-mmio bus that is implemented by a VirtIOMMIOProxy object. Ask the parent bus of VirtIOMMIOProxy to format the device path of VirtIOMMIOProxy, as a path prefix. (This is identical to what virtio_bus_get_dev_path() does.) (2) Append the base address of VirtIOMMIOProxy to the device path, such as: - virtio-mmio@000000000a003e00, - virtio-mmio@000000000a003c00. Given that these device paths are placed in the migration stream, step (2) above, if done unconditionally, would break migration. So make that step conditional on a new VirtIOMMIOProxy property, which is enabled for 2.7 machine types and later. Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Cole Robinson <crobinso@redhat.com> Cc: Dr. David Alan Gilbert <dgilbert@redhat.com> Cc: Kevin Zhao <kevin.zhao@linaro.org> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Tom Hanson <thomas.hanson@linaro.org> Reported-by: Kevin Zhao <kevin.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Laszlo Ersek <lersek@redhat.com> Message-id: 1467739394-28357-1-git-send-email-lersek@redhat.com Fixes: https://bugs.launchpad.net/qemu/+bug/1594239 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-07-14Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream-fwcfg' into ↵Peter Maydell
staging * Updated fw_cfg option ROM to include DMA support # gpg: Signature made Thu 14 Jul 2016 14:51:06 BST # gpg: using RSA key 0xBFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream-fwcfg: Add optionrom compatible with fw_cfg DMA version Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-07-14Add optionrom compatible with fw_cfg DMA versionMarc Marí
This optionrom is based on linuxboot.S. Signed-off-by: Marc Marí <markmb@redhat.com> Signed-off-by: Richard W.M. Jones <rjones@redhat.com> Message-Id: <1464027093-24073-2-git-send-email-rjones@redhat.com> [Add -fno-toplevel-reorder, support clang without -m16. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-07-14Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
* SCSI scanner support * fixes to qemu-char and net exit * FreeBSD fixes * Other small bugfixes # gpg: Signature made Wed 13 Jul 2016 12:30:11 BST # gpg: using RSA key 0xBFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: hostmem: detect host backend memory is being used properly hostmem: fix QEMU crash by 'info memdev' char: do not use atexit cleanup handler net: do not use atexit for cleanup slirp: use exit notifier for slirp_smb_cleanup tap: use an exit notifier to call down_script util: Fix MIN_NON_ZERO qemu-sockets: use qapi_free_SocketAddress in cleanup disas: avoid including everything in headers compiled from C++ json-streamer: fix double-free on exiting during a parse main-loop: check return value before using pointer Use "-s" instead of "--quiet" to resolve non-fatal build error on FreeBSD. scsi-bus: Use longer sense buffer with scanners scsi-bus: Add SCSI scanner support Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-07-13Improve block job rate limiting for small bandwidth valuesSascha Silbe
ratelimit_calculate_delay() previously reset the accounting every time slice, no matter how much data had been processed before. This had (at least) two consequences: 1. The minimum speed is rather large, e.g. 5 MiB/s for commit and stream. Not sure if there are real-world use cases where this would be a problem. Mirroring and backup over a slow link (e.g. DSL) would come to mind, though. 2. Tests for block job operations (e.g. cancel) were rather racy All block jobs currently use a time slice of 100ms. That's a reasonable value to get smooth output during regular operation. However this also meant that the state of block jobs changed every 100ms, no matter how low the configured limit was. On busy hosts, qemu often transferred additional chunks until the test case had a chance to cancel the job. Fix the block job rate limit code to delay for more than one time slice to address the above issues. To make it easier to handle oversized chunks we switch the semantics from returning a delay _before_ the current request to a delay _after_ the current request. If necessary, this delay consists of multiple time slice units. Since the mirror job sends multiple chunks in one go even if the rate limit was exceeded in between, we need to keep track of the start of the current time slice so we can correctly re-compute the delay for the updated amount of data. The minimum bandwidth now is 1 data unit per time slice. The block jobs are currently passing the amount of data transferred in sectors and using 100ms time slices, so this translates to 5120 bytes/second. With chunk sizes usually being O(512KiB), tests have plenty of time (O(100s)) to operate on block jobs. The chance of a race condition now is fairly remote, except possibly on insanely loaded systems. Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Message-id: 1467127721-9564-2-git-send-email-silbe@linux.vnet.ibm.com Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-07-13block/qdev: Allow configuring rerror/werror with qdev propertiesKevin Wolf
The rerror/werror policies are implemented in the devices, so that's where they should be configured. In comparison to the old options in -drive, the qdev properties are only added to those devices that actually support them. If the option isn't given (or "auto" is specified), the setting of the BlockBackend is used for compatibility with the old options. For block jobs, "auto" is the same as "enospc". Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-07-13block/qdev: Allow configuring WCE with qdev propertiesKevin Wolf
As cache.writeback is a BlockBackend property and as such more related to the guest device than the BlockDriverState, we already removed it from the blockdev-add interface. This patch adds the new way to set it, as a qdev property of the corresponding guest device. For example: -drive if=none,file=test.img,node-name=img -device ide-hd,drive=img,write-cache=off Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-07-13hostmem: detect host backend memory is being used properlyXiao Guangrong
Currently, we use memory_region_is_mapped() to detect if the host backend memory is being used. This works if the memory is directly mapped into guest's address space, however, it is not true for nvdimm as it uses aliased memory region to map the memory. This is why this bug can happen: https://bugzilla.redhat.com/show_bug.cgi?id=1352769 Fix it by introduce a new filed, is_mapped, to HostMemoryBackend, we set/clear this filed accordingly when the device link/unlink to host backend memory Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-07-13char: do not use atexit cleanup handlerMarc-André Lureau
It turns out qemu is calling exit() in various places from various threads without taking much care of resources state. The atexit() cleanup handlers cannot easily destroy resources that are in use (by the same thread or other). Since c1111a24a3, TCG arm guests run into the following abort() when running tests, the chardev mutex is locked during the write, so qemu_mutex_destroy() returns an error: #0 0x00007fffdbb806f5 in raise () at /lib64/libc.so.6 #1 0x00007fffdbb822fa in abort () at /lib64/libc.so.6 #2 0x00005555557616fe in error_exit (err=<optimized out>, msg=msg@entry=0x555555c38c30 <__func__.14622> "qemu_mutex_destroy") at /home/drjones/code/qemu/util/qemu-thread-posix.c:39 #3 0x0000555555b0be20 in qemu_mutex_destroy (mutex=mutex@entry=0x5555566aa0e0) at /home/drjones/code/qemu/util/qemu-thread-posix.c:57 #4 0x00005555558aab00 in qemu_chr_free_common (chr=0x5555566aa0e0) at /home/drjones/code/qemu/qemu-char.c:4029 #5 0x00005555558b05f9 in qemu_chr_delete (chr=<optimized out>) at /home/drjones/code/qemu/qemu-char.c:4038 #6 0x00005555558b05f9 in qemu_chr_delete (chr=<optimized out>) at /home/drjones/code/qemu/qemu-char.c:4044 #7 0x00005555558b062c in qemu_chr_cleanup () at /home/drjones/code/qemu/qemu-char.c:4557 #8 0x00007fffdbb851e8 in __run_exit_handlers () at /lib64/libc.so.6 #9 0x00007fffdbb85235 in () at /lib64/libc.so.6 #10 0x00005555558d1b39 in testdev_write (testdev=0x5555566aa0a0) at /home/drjones/code/qemu/backends/testdev.c:71 #11 0x00005555558d1b39 in testdev_write (chr=<optimized out>, buf=0x7fffc343fd9a "", len=0) at /home/drjones/code/qemu/backends/testdev.c:95 #12 0x00005555558adced in qemu_chr_fe_write (s=0x5555566aa0e0, buf=buf@entry=0x7fffc343fd98 "0q", len=len@entry=2) at /home/drjones/code/qemu/qemu-char.c:282 Instead of using a atexit() handler, only run the chardev cleanup as initially proposed at the end of main(), where there are less chances (hic) of conflicts or other races. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reported-by: Andrew Jones <drjones@redhat.com> Message-Id: <20160704153823.16879-1-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-07-13coroutine: move entry argument to qemu_coroutine_createPaolo Bonzini
In practice the entry argument is always known at creation time, and it is confusing that sometimes qemu_coroutine_enter is used with a non-NULL argument to re-enter a coroutine (this happens in block/sheepdog.c and tests/test-coroutine.c). So pass the opaque value at creation time, for consistency with e.g. aio_bh_new. Mostly done with the following semantic patch: @ entry1 @ expression entry, arg, co; @@ - co = qemu_coroutine_create(entry); + co = qemu_coroutine_create(entry, arg); ... - qemu_coroutine_enter(co, arg); + qemu_coroutine_enter(co); @ entry2 @ expression entry, arg; identifier co; @@ - Coroutine *co = qemu_coroutine_create(entry); + Coroutine *co = qemu_coroutine_create(entry, arg); ... - qemu_coroutine_enter(co, arg); + qemu_coroutine_enter(co); @ entry3 @ expression entry, arg; @@ - qemu_coroutine_enter(qemu_coroutine_create(entry), arg); + qemu_coroutine_enter(qemu_coroutine_create(entry, arg)); @ reentry @ expression co; @@ - qemu_coroutine_enter(co, NULL); + qemu_coroutine_enter(co); except for the aforementioned few places where the semantic patch stumbled (as expected) and for test_co_queue, which would otherwise produce an uninitialized variable warning. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-07-13coroutine: use QSIMPLEQ instead of QTAILQPaolo Bonzini
CoQueue do not need to remove any element but the head of the list; processing is always strictly FIFO. Therefore, the simpler singly-linked QSIMPLEQ can be used instead. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-07-13osdep: Introduce qemu_dupFam Zheng
And use it in qemu_dup_flags. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-07-13commit: Add 'job-id' parameter to 'block-commit'Alberto Garcia
This patch adds a new optional 'job-id' parameter to 'block-commit', allowing the user to specify the ID of the block job to be created. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-07-13stream: Add 'job-id' parameter to 'block-stream'Alberto Garcia
This patch adds a new optional 'job-id' parameter to 'block-stream', allowing the user to specify the ID of the block job to be created. The HMP 'block_stream' command remains unchanged. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-07-13backup: Add 'job-id' parameter to 'blockdev-backup' and 'drive-backup'Alberto Garcia
This patch adds a new optional 'job-id' parameter to 'blockdev-backup' and 'drive-backup', allowing the user to specify the ID of the block job to be created. The HMP 'drive_backup' command remains unchanged. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-07-13mirror: Add 'job-id' parameter to 'blockdev-mirror' and 'drive-mirror'Alberto Garcia
This patch adds a new optional 'job-id' parameter to 'blockdev-mirror' and 'drive-mirror', allowing the user to specify the ID of the block job to be created. The HMP 'drive_mirror' command remains unchanged. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-07-13blockjob: Add 'job_id' parameter to block_job_create()Alberto Garcia
When a new job is created, the job ID is taken from the device name of the BDS. This patch adds a new 'job_id' parameter to let the caller provide one instead. This patch also verifies that the ID is always unique and well-formed. This causes problems in a couple of places where no ID is being set, because the BDS does not have a device name. In the case of test_block_job_start() (from test-blockjob-txn.c) we can simply use this new 'job_id' parameter to set the missing ID. In the case of img_commit() (from qemu-img.c) we still don't have the API to make commit_active_start() set the job ID, so we solve it by setting a default value. We'll get rid of this as soon as we extend the API. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-07-13blockjob: Add block_job_get()Alberto Garcia
Currently the way to look for a specific block job is to iterate the list manually using block_job_next(). Since we want to be able to identify a job primarily by its ID it makes sense to have a function that does just that. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-07-13blockjob: Update description of the 'id' fieldAlberto Garcia
The 'id' field of the BlockJob structure will be able to hold any ID, not only a device name. This patch updates the description of that field and the error messages where it is being used. Soon we'll add the ability to set an arbitrary ID when creating a block job. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-07-13stream: Fix prototype of stream_start()Alberto Garcia
'stream-start' has a parameter called 'backing-file', which is the string to be written to bs->backing when the job finishes. In the stream_start() implementation it is called 'backing_file_str', but it the prototype in the header file it is called 'base_id'. This patch fixes it so the name is the same in both cases and is consistent with other cases (like commit_start()). Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-07-13util: Fix MIN_NON_ZEROFam Zheng
MIN_NON_ZERO(1, 0) is evaluated to 0. Rewrite the macro to fix it. Reported-by: Miroslav Rezanina <mrezanin@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com> Message-Id: <1468306113-847-1-git-send-email-famz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-07-12disas: avoid including everything in headers compiled from C++Paolo Bonzini
disas/arm-a64.cc is careful to include only the bare minimum that it needs---qemu/osdep.h and disas/bfd.h. Unfortunately, disas/bfd.h then includes qemu-common.h, which brings in qemu/option.h and from there we get the kitchen sink. This causes problems because for example QEMU's atomic macros conflict with C++ atomic types. But really all that bfd.h needs is the fprintf_function typedef, so replace the inclusion of qemu-common.h with qemu/fprintf-fn.h. Reported-by: Sean Bruno <sbruno@freebsd.org> Tested-by: Sean Bruno <sbruno@freebsd.org> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Markus Armbruster <armbru@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-07-12scsi-bus: Use longer sense buffer with scannersJarkko Lavinen
Scanners can provide additional sense bytes beyond 18 bytes. VueScan uses 32 bytes alloc length with Request Sense command. Signed-off-by: Jarkko Lavinen <jarkko.lavinen@iki.fi> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-07-12scsi-bus: Add SCSI scanner supportJarkko Lavinen
Add support for missing scanner specific SCSI commands and their xfer lenghts as per ANSI spec section 15. Signed-off-by: Jarkko Lavinen <jarkko.lavinen@iki.fi> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-07-12Merge remote-tracking branch 'remotes/armbru/tags/pull-include-2016-07-12' ↵Peter Maydell
into staging Clean up #include "..." vs <...> and header guards # gpg: Signature made Tue 12 Jul 2016 15:23:43 BST # gpg: using RSA key 0x3870B400EB918653 # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" # Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653 * remotes/armbru/tags/pull-include-2016-07-12: cris: Fix broken header guard in hw/cris/boot.h Clean up decorations and whitespace around header guards Clean up ill-advised or unusual header guards libdecnumber: Don't error out on decNumberLocal.h re-inclusion libdecnumber: Don't fool around with guards to avoid #include Clean up header guards that don't match their file name Drop Emacs local variables lists redundant with .dir-locals.el spapr_pci: Include spapr.h instead of playing games with #error tcg: Clean up tcg-target.h header guards linux-user: Fix broken header guard in syscall_defs.h linux-user: Clean up hostdep.h header guards linux-user: Clean up target_structs.h header guards linux-user: Clean up target_signal.h header guards linux-user: Clean up target_cpu.h header guards linux-user: Clean up target_syscall.h header guards target-*: Clean up cpu.h header guards scripts: New clean-header-guards.pl Use #include "..." for our own headers, <...> for others Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-07-12Clean up decorations and whitespace around header guardsMarkus Armbruster
Cleaned up with scripts/clean-header-guards.pl. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-07-12Clean up ill-advised or unusual header guardsMarkus Armbruster
Cleaned up with scripts/clean-header-guards.pl. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-07-12libdecnumber: Don't error out on decNumberLocal.h re-inclusionMarkus Armbruster
decNumberLocal.h errors out when it's included with its header guard defined. This catches multiple inclusions. Drop that. Including it multiple times is safe, and the compiler can do it efficiently. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-07-12libdecnumber: Don't fool around with guards to avoid #includeMarkus Armbruster
Some libdecnumber headers avoid including decNumber.h or decContext.h again by checking their header guards. Don't. Including them multiple times is safe, and the compiler can do it efficiently. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-07-12Clean up header guards that don't match their file nameMarkus Armbruster
Header guard symbols should match their file name to make guard collisions less likely. Offenders found with scripts/clean-header-guards.pl -vn. Cleaned up with scripts/clean-header-guards.pl, followed by some renaming of new guard symbols picked by the script to better ones. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-07-12Drop Emacs local variables lists redundant with .dir-locals.elMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-07-12spapr_pci: Include spapr.h instead of playing games with #errorMarkus Armbruster
include/hw/pci-host/spapr.h needs hw/ppc/spapr.h. It checks whether its header guard is defined, and errors out if it isn't. Playing games with some other header's guard symbol is not a good idea. Just include the frackin' header already. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-07-12Use #include "..." for our own headers, <...> for othersMarkus Armbruster
Tracked down with an ugly, brittle and probably buggy Perl script. Also move includes converted to <...> up so they get included before ours where that's obviously okay. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Tested-by: Eric Blake <eblake@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-07-12bswap.h: Document cpu_to_* and *_to_cpu conversion functionsPeter Maydell
Add a documentation comment describing the functions for converting between the cpu and little or bigendian formats. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1467908460-27048-6-git-send-email-peter.maydell@linaro.org
2016-07-12bswap.h: Fix comment typoPeter Maydell
Fix a typo in a comment. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Stefan Weil <sw@weilnetz.de> Message-id: 1467908460-27048-5-git-send-email-peter.maydell@linaro.org
2016-07-12bswap.h: Remove unused cpu_to_*w() and *_to_cpup()Peter Maydell
Now that all uses of cpu_to_*w() and *_to_cpup() have been replaced with either ld*_p()/st*_p() or by doing direct dereferences and using the cpu_to_*()/*_to_cpu() byteswap functions, we can remove the unused implementations. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1467908460-27048-4-git-send-email-peter.maydell@linaro.org
generated by cgit v1.2.3 (git 2.26.2) at 2025-01-26 07:33:32 +0000