| Age | Commit message (Collapse) | Author |
|---|
|
Coding style change only.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
'remotes/pmaydell/tags/pull-target-arm-20150529' into staging
target-arm:
* Support ACPI for ARMv8 systems using the 'virt' board
(and a UEFI boot image, typically)
* avoid buffer overrun in some UNPREDICTABLE ldrd/strd cases
* further work preparing for 64-bit EL2/EL3 support
# gpg: Signature made Fri May 29 12:14:06 2015 BST using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
* remotes/pmaydell/tags/pull-target-arm-20150529: (39 commits)
target-arm: Avoid buffer overrun on UNPREDICTABLE ldrd/strd
hw/arm/virt: Enable dynamic generation of ACPI v5.1 tables
ACPI: split CONFIG_ACPI into 4 pieces
hw/arm/virt-acpi-build: Add PCIe controller in ACPI DSDT table
hw/acpi/aml-build: Add Unicode macro
hw/acpi/aml-build: Add aml_dword_io() term
hw/acpi/aml-build: Add aml_create_dword_field() term
hw/acpi/aml-build: Add aml_else() term
hw/acpi/aml-build: Add aml_lnot() term
hw/acpi/aml-build: Add aml_or() term
hw/acpi/aml-build: Add ToUUID macro
hw/acpi/aml-build: Make aml_buffer() definition consistent with the spec
hw/arm/virt-acpi-build: Generate MCFG table
hw/arm/virt-acpi-build: Generate RSDP table
hw/arm/virt-acpi-build: Generate RSDT table
hw/arm/virt-acpi-build: Generate GTDT table
hw/arm/virt-acpi-build: Generate MADT table
hw/arm/virt-acpi-build: Generate FADT table and update ACPI headers
hw/arm/virt-acpi-build: Generation of DSDT table for virt devices
hw/acpi/aml-build: Add aml_interrupt() term
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
into staging
Block QAPI, monitor, command line patches
# gpg: Signature made Fri May 29 12:02:32 2015 BST using RSA key ID EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
* remotes/armbru/tags/pull-block-2015-05-29:
qapi: add dirty bitmap status
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
staging
gtk: add opengl rendering support.
small bugfixes for gtk and opengl ui code.
# gpg: Signature made Fri May 29 10:44:54 2015 BST using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
* remotes/kraxel/tags/pull-gtk-20150529-1:
gtk: Replace gdk_cursor_new()
gtk: add opengl support, using egl
ui: add egl-helpers
ui: shader.h protect against double inclusion
ui: use libexpoxy
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Bitmaps can be in a handful of different states with potentially
more to come as we tool around with migration and persistence patches.
Management applications may need to know why certain bitmaps are
unavailable for various commands, e.g. busy in another operation,
busy being migrated, etc.
Right now, all we offer is BlockDirtyInfo's boolean member 'frozen'.
Instead of adding more booleans, replace it by an enumeration member
'status' with values 'active' and 'frozen'. Then add new value
'disabled'.
Incompatible change. Fine because the changed part hasn't been
released so far.
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1432522520-8068-22-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1432522520-8068-21-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1432522520-8068-20-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1432522520-8068-19-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1432522520-8068-18-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1432522520-8068-17-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Add ToUUID macro, this is useful for generating PCIe ACPI table.
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1432522520-8068-16-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
According to ACPI spec, DefBuffer can take two parameters: BufferSize
and ByteList. Make it consistent with the spec. Uninitialized buffer
could be requested by passing ByteList as NULL to reserve space.
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1432522520-8068-15-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
RSDT points to other tables FADT, MADT, GTDT. This code is shared with x86.
Here we still use RSDT as UEFI puts ACPI tables below 4G address space,
and UEFI ignore the RSDT or XSDT.
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1432522520-8068-12-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
ACPI v5.1 defines GTDT for ARM devices as a place to describe timer
related information in the system. The Arch Timer interrupts must
be provided for GTDT.
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1432522520-8068-11-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
MADT describes GIC enabled ARM platforms. The GICC and GICD
subtables are used to define the GIC regions.
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1432522520-8068-10-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
In the case of mach virt, it is used to set the Hardware Reduced bit
and enable PSCI SMP booting through HVC. So ignore FACS and FADT
points to DSDT.
Update the header definitions for FADT taking into account the new
additions of ACPI v5.1 in `include/hw/acpi/acpi-defs.h`
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 1432522520-8068-9-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Add aml_interrupt() for describing device interrupt in resource template.
These can be used to generating DSDT table for ACPI on ARM.
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 1432522520-8068-7-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Add aml_memory32_fixed() for describing device mmio region in resource
template. These can be used to generating DSDT table for ACPI on ARM.
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1432522520-8068-6-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Introduce a preliminary framework in virt-acpi-build.c with the main
ACPI build functions. It exposes the generated ACPI contents to
guest over fw_cfg.
The required ACPI v5.1 tables for ARM are:
- RSDP: Initial table that points to XSDT
- RSDT: Points to FADT GTDT MADT tables
- FADT: Generic information about the machine
- GTDT: Generic timer description table
- MADT: Multiple APIC description table
- DSDT: Holds all information about system devices/peripherals, pointed by FADT
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 1432522520-8068-5-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
To generate ACPI table for PCIe controller, we need the base and size of
the PCIe ranges. Record these ranges in MemMapEntry array, then we could
share and use them for generating ACPI table.
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 1432522520-8068-4-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Move some common definitions to virt.h. These will be used by
generating ACPI tables.
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1432522520-8068-3-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 1432522520-8068-2-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
This adds opengl rendering support to the gtk ui, using egl.
It's off by default for now, use 'qemu -display gtk,gl=on'
to play with this.
Note that gtk got native opengl support with release 3.16.
There most likely will be a separate implementation for 3.16+,
using the native gtk opengl support. This patch covers older
versions (and for the time being 3.16 too, hopefully without
rendering quirks).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Add helper functions to initialize OpenGL using egl.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
|
|
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
|
|
libepoxy does the opengl extension handling for us.
It also is helpful for trouble-shooting as it prints nice error messages
instead of silently failing or segfaulting in case we do something
wrong, like using gl commands not supported by the current context.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
|
|
This patch adds the virtio-input-hid base class and
virtio-{keyboard,mouse,tablet} subclasses building on the base class.
They are hooked up to the qemu input core and deliver input events
to the guest like all other hid devices (ps/2 kbd, usb tablet, ...).
Using them is as simple as adding "-device virtio-tablet-device" to
your command line, for use all transports except pci. virtio-pci
support comes as separate patch, once virtio-pci got virtio 1.0
support.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
This patch adds virtio-input support to qemu. It brings a abstract
base class providing core support, other classes can build on it to
actually implement input devices.
virtio-input basically sends linux input layer events (evdev) over
virtio.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Linux input layer (evdev) header file.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Sync with kernel elf.h updates to get s390x vector register definitions.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
|
|
# gpg: Signature made Fri May 22 20:58:44 2015 BST using RSA key ID AAFC390E
# gpg: Good signature from "John Snow (John Huston) <jsnow@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: FAEB 9711 A12C F475 812F 18F2 88A9 064D 1835 61EB
# Subkey fingerprint: F9B7 ABDB BCAC DF95 BE76 CBD0 7DEF 8106 AAFC 390E
* remotes/jnsnow/tags/ide-pull-request:
ahci: do not remap clb/fis unconditionally
macio: move unaligned DMA write code into separate pmac_dma_write() function
macio: move unaligned DMA read code into separate pmac_dma_read() function
qtest: pre-buffer hex nibs
libqos/ahci: Swap memread/write with bufread/write
qtest: add memset to qtest protocol
qtest: Add base64 encoded read/write
qtest: allow arbitrarily long sends
qtest/ahci: add migrate halted dma test
qtest/ahci: add halted dma test
qtest/ahci: add flush migrate test
qtest/ahci: add migrate dma test
qtest/ahci: Add migration test
ich9/ahci: Enable Migration
libqos: Add migration helpers
libqos/ahci: Fix sector set method
libqos/ahci: Add halted command helpers
glib: remove stale compat functions
configure: require glib 2.22
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Similarly switch the macio IDE routines over to use the new function and
tidy-up the remaining code as required.
[Maintainer edit: printf format codes adjusted for 32/64bit. --js]
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: John Snow <jsnow@redhat.com>
Message-id: 1425939893-14404-3-git-send-email-mark.cave-ayland@ilande.co.uk
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
Since we're bumping the version to 2.22+,
remove the now-stale compat functions.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1431469140-22208-2-git-send-email-jsnow@redhat.com
|
|
The qemu-img.c file has a read_password() method impl that is
used to prompt for passwords on the console, with impls for
POSIX and Windows. This will be needed by qemu-io.c too, so
move it into the QEMU osdep/oslib files where it can be shared
without code duplication
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
The patch introduces new concept: minimal memory alignment for bounce
buffers. Original so called "optimal" value is actually minimal required
value for aligment. It should be used for validation that the IOVec
is properly aligned and bounce buffer is not required.
Though, from the performance point of view, it would be better if
bounce buffer or IOVec allocated by QEMU will be aligned stricter.
The patch does not change any alignment value yet.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1431441056-26198-2-git-send-email-den@openvz.org
CC: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
There are 2x Cadence UARTs in Zynq MP. Add them.
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: e30795536f77599fabc1052278d846ccd52322e2.1431381507.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Create a new header for Cadence UART to allow using the device with
modern SoC programming conventions. The state struct needs to be
visible to embed the device in SoC containers.
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 46a0fbd45b6b205f54c4a8c778deb75c77f8abdf.1431381507.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
There are 4x Cadence GEMs in ZynqMP. Add them.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 7d3e68e5495d145255f0ee567046415e3a26d67e.1431381507.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Create a new header for Cadence GEM to allow using the device with
modern SoC programming conventions. The state struct needs to be
visible to embed the device in SoC containers.
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: a98b5df6440c5bff8f813a26bb53ce1cfefb4c4c.1431381507.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Add the GIC and connect IRQ outputs to the CPUs. The GIC regions are
under-decoded through a 64k address region so implement aliases
accordingly.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 5853189965728d676106d9e94e76b9bb87981cb5.1431381507.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
With quad Cortex-A53 CPUs.
Use SMC PSCI, with the standard policy of secondaries starting in
power-off.
Tested-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: a16202a6c7b79e446e5289d38cb18d2ee4b897a0.1431381507.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
ICCICR/GICC_CTLR is banked in GICv1 implementations with Security
Extensions or in GICv2 in independent from Security Extensions.
This makes it possible to enable forwarding of interrupts from
the CPU interfaces to the connected processors for Group0 and Group1.
We also allow to set additional bits like AckCtl and FIQEn by changing
the type from bool to uint32. Since the field does not only store the
enable bit anymore and since we are touching the vmstate, we use the
opportunity to rename the field to cpu_ctlr.
Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch>
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1430502643-25909-9-git-send-email-peter.maydell@linaro.org
Message-id: 1429113742-8371-9-git-send-email-greg.bellows@linaro.org
[PMM: rewrote to store state in a single uint32_t rather than
keeping the NS and S banked variants separate; this considerably
simplifies the get/set functions]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
This register is banked in GICs with Security Extensions. Storing the
non-secure copy of BPR in the abpr, which is an alias to the non-secure
copy for secure access. ABPR itself is only accessible from secure state
if the GIC implements Security Extensions.
Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch>
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1430502643-25909-8-git-send-email-peter.maydell@linaro.org
Message-id: 1429113742-8371-10-git-send-email-greg.bellows@linaro.org
[PMM: rewrote to fix style issues and correct handling of GICv2
without security extensions]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
ICDDCR/GICD_CTLR is banked if the GIC has the security extensions,
and the S (or only) copy has separate enable bits for Group0 and
Group1 enable if the GIC implements interrupt groups.
EnableGroup0 (Bit [1]) in GICv1 is architecturally IMPDEF. Since this
bit (Enable Non-secure) is present in the integrated GIC of the Cortex-A9
MPCore, we support this bit in our GICv1 implementation too.
Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch>
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1430502643-25909-7-git-send-email-peter.maydell@linaro.org
Message-id: 1429113742-8371-8-git-send-email-greg.bellows@linaro.org
[PMM: rewritten to store the state in a single s->ctlr uint32,
with the NS register handled as an alias of bit 1 in that value;
added vmstate version bump]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
The Interrupt Group Registers allow the guest to configure interrupts
into one of two groups, where Group0 are higher priority and may
be routed to IRQ or FIQ, and Group1 are lower priority and always
routed to IRQ. (In a GIC with the security extensions Group0 is
Secure interrupts and Group 1 is NonSecure.)
The GICv2 always supports interrupt grouping; the GICv1 does only
if it implements the security extensions.
This patch implements the ability to read and write the registers;
the actual functionality the bits control will be added in a
subsequent patch.
Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch>
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1430502643-25909-5-git-send-email-peter.maydell@linaro.org
Message-id: 1429113742-8371-7-git-send-email-greg.bellows@linaro.org
[PMM: bring GIC_*_GROUP macros into line with the others, ie a
simple SET/CLEAR/TEST rather than GROUP0/GROUP1;
utility gic_has_groups() function;
minor style fixes;
bump vmstate version]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Add a QOM property which allows the GIC Security Extensions to be
enabled. These are an optional part of the GICv1 and GICv2 architecture.
This commit just adds the property and some sanity checks that it
is only enabled on GIC revisions that support it.
Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch>
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1430502643-25909-3-git-send-email-peter.maydell@linaro.org
Message-id: 1429113742-8371-5-git-send-email-greg.bellows@linaro.org
[PMM: changed property name, added checks that it isn't set for
older GIC revisions or if using the KVM VGIC; reworded commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Create the outbound FIQ lines from the GIC to the CPUs; these are
used if the GIC has security extensions or grouping support.
Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch>
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1430502643-25909-2-git-send-email-peter.maydell@linaro.org
Message-id: 1429113742-8371-2-git-send-email-greg.bellows@linaro.org
[PMM: added FIQ lines to kvm-arm-gic so its interface is the same;
tweaked commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
staging
# gpg: Signature made Mon May 11 16:25:58 2015 BST using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
* remotes/stefanha/tags/net-pull-request:
rocker: timestamp on the debug logs helps correlate with events in the VM
MAINTAINERS: add rocker
rocker: add tests
rocker: add new rocker switch device
pci: add network device class 'other' for network switches
pci: add rocker device ID
rocker: add register programming guide
virtio-net: use qemu_mac_strdup_printf
net: add MAC address string printer
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
staging
QMP pull request
# gpg: Signature made Mon May 11 14:15:19 2015 BST using RSA key ID E24ED5A7
# gpg: Good signature from "Luiz Capitulino <lcapitulino@gmail.com>"
* remotes/qmp-unstable/tags/for-upstream:
scripts: qmp-shell: Add verbose flag
scripts: qmp-shell: add transaction subshell
scripts: qmp-shell: Expand support for QMP expressions
scripts: qmp-shell: refactor helpers
MAINTAINERS: New maintainer for QMP and QAPI
json-parser: Accept 'null' in QMP
qobject: Add a special null QObject
qobject: Clean up around qtype_code
QJSON: Use OBJECT_CHECK
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
