aboutsummaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2013-04-08Merge remote-tracking branch 'bonzini/hw-dirs' into stagingAnthony Liguori
# By Paolo Bonzini # Via Paolo Bonzini * bonzini/hw-dirs: (35 commits) hw: move private headers to hw/ subdirectories. MAINTAINERS: update for source code movement hw: move last file to hw/arm/ hw: move hw/kvm/ to hw/i386/kvm hw: move ARM CPU cores to hw/cpu/, configure with default-configs/ hw: move other devices to hw/misc/, configure with default-configs/ hw: move NVRAM interfaces to hw/nvram/, configure with default-configs/ hw: move GPIO interfaces to hw/gpio/, configure with default-configs/ hw: move interrupt controllers to hw/intc/, configure with default-configs/ hw: move DMA controllers to hw/dma/, configure with default-configs/ hw: move VFIO and ivshmem to hw/misc/ hw: move PCI bridges to hw/pci-* or hw/ARCH hw: move SD/MMC devices to hw/sd/, configure with default-configs/ hw: move timer devices to hw/timer/, configure with default-configs/ hw: move ISA bridges and devices to hw/isa/, configure with default-configs/ hw: move char devices to hw/char/, configure via default-configs/ hw: move more files to hw/xen/ hw: move SCSI controllers to hw/scsi/, configure via default-configs/ hw: move SSI controllers to hw/ssi/, configure via default-configs/ hw: move I2C controllers to hw/i2c/, configure via default-configs/ ... Message-id: 1365442249-18259-1-git-send-email-pbonzini@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-08hw: move PCI bridges to hw/pci-* or hw/ARCHPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move timer devices to hw/timer/, configure with default-configs/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move headers to include/Paolo Bonzini
Many of these should be cleaned up with proper qdev-/QOM-ification. Right now there are many catch-all headers in include/hw/ARCH depending on cpu.h, and this makes it necessary to compile these files per-target. However, fixing this does not belong in these patches. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-06Merge branch 'arm-devs.next' of git://git.linaro.org/people/pmaydell/qemu-armBlue Swirl
* 'arm-devs.next' of git://git.linaro.org/people/pmaydell/qemu-arm: hw/nand.c: Fix nand erase operation cadence_uart: Flush queued characters on reset pl330: Don't inhibit ES bits on INTEN pflash_cfi01: Implement migration support pflash_cfi01: Drop unused 'bypass' field hw/arm_gic_common: Use vmstate struct rather than save/load functions arm_gic: Fix sizes of state fields in preparation for vmstate support vmstate: Add support for two dimensional arrays hw/onenand.c: fix migration of dynamically allocated buffer "otp" hw/sd.c: fix migration of dynamically allocated buffer "buf" vmstate.h: introduce VMSTATE_BUFFER_POINTER_UNSAFE macro hw/arm_mptimer: Save the timer state pl050: Don't send always-constant is_mouse field hw/arm/nseries: don't print to stdout or stderr
2013-04-05Merge remote-tracking branch 'kwolf/for-anthony' into stagingAnthony Liguori
# By Stefan Hajnoczi (4) and Kevin Wolf (3) # Via Kevin Wolf * kwolf/for-anthony: qcow2: Fix L1 write error handling in qcow2_update_snapshot_refcount qcow2: Return real error in qcow2_update_snapshot_refcount block: clean up I/O throttling wait_time code block: drop duplicated slice extension code block: keep I/O throttling slice time constant block: fix I/O throttling accounting blind spot usb-storage: Forward serial number to scsi-disk
2013-04-05block: keep I/O throttling slice time constantStefan Hajnoczi
It is not necessary to adjust the slice time at runtime. We already extend the current slice in order to carry over accounting into the next slice. Changing the actual slice time value introduces oscillations. The guest may experience large changes in throughput or IOPS from one moment to the next when slice times are adjusted. Reported-by: Benoît Canet <benoit@irqsave.net> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Tested-By: Benoit Canet <benoit@irqsave.net> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-04-05block: fix I/O throttling accounting blind spotStefan Hajnoczi
I/O throttling relies on bdrv_acct_done() which is called when a request completes. This leaves a blind spot since we only charge for completed requests, not submitted requests. For example, if there is 1 operation remaining in this time slice the guest could submit 3 operations and they will all be submitted successfully since they don't actually get accounted for until they complete. Originally we probably thought this is okay since the requests will be accounted when the time slice is extended. In practice it causes fluctuations since the guest can exceed its I/O limit and it will be punished for this later on. Account for I/O upon submission so that I/O limits are enforced properly. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Tested-By: Benoit Canet <benoit@irqsave.net> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-04-05vmstate: Add support for two dimensional arraysPeter Maydell
Add support for migrating two dimensional arrays, by defining a set of new macros VMSTATE_*_2DARRAY paralleling the existing VMSTATE_*_ARRAY macros. 2D arrays are handled the same for actual state serialization; the only difference is that the type check has to change for a 2D array. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Igor Mitsyanko <i.mitsyanko@gmail.com> Message-id: 1363975375-3166-2-git-send-email-peter.maydell@linaro.org
2013-04-05vmstate.h: introduce VMSTATE_BUFFER_POINTER_UNSAFE macroIgor Mitsyanko
Macro could be used to migrate a dynamically allocated buffer of known size. Signed-off-by: Igor Mitsyanko <i.mitsyanko@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1362923278-4080-2-git-send-email-i.mitsyanko@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-04-05qstring: add qstring_get_length()Luiz Capitulino
Long overdue. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com>
2013-04-04Allow clock_gettime() monotonic clock to be utilized on more OS'sBrad Smith
Allow the clock_gettime() code using monotonic clock to be utilized on more POSIX compliannt OS's. This started as a fix for OpenBSD which was listed in one function as part of the previous hard coded list of OS's for the functions to support but not in the other. Signed-off-by: Brad Smith <brad@comstyle.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20130405003748.GH884@rox.home.comstyle.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-04acpi_table_add(): accept QemuOpts and parse it with OptsVisitorLaszlo Ersek
As one consequence, strtok() -- which modifies its argument -- is replaced with g_strsplit(). Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> Message-id: 1363821803-3380-6-git-send-email-lersek@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-04qemu-char: Add qemu_chr_fe_claim / _release helper functionsHans de Goede
Add qemu_chr_fe_claim / _release helper functions for properly dealing with avail_connections. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Message-id: 1364412581-3672-2-git-send-email-hdegoede@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-02Merge remote-tracking branch 'luiz/queue/qmp' into stagingAnthony Liguori
# By Stefan Hajnoczi # Via Luiz Capitulino * luiz/queue/qmp: chardev: clear O_NONBLOCK on SCM_RIGHTS file descriptors qemu-socket: set passed fd non-blocking in socket_connect() net: ensure "socket" backend uses non-blocking fds oslib-posix: rename socket_set_nonblock() to qemu_set_nonblock()
2013-04-02oslib-posix: rename socket_set_nonblock() to qemu_set_nonblock()Stefan Hajnoczi
The fcntl(fd, F_SETFL, O_NONBLOCK) flag is not specific to sockets. Rename to qemu_set_nonblock() just like qemu_set_cloexec(). Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-04-02QOM-ify the TPM supportStefan Berger
QOM-ified the TPM support with much code borrowed from the rng implementation. All other TPM related code moves will be provided in a subsequent patch. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Message-id: 1364469981.24703.1.camel@d941e-10 Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-03-27qemu-char: Consolidate guest_close/guest_open into a set_fe_open callbackHans de Goede
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Message-id: 1364292483-16564-7-git-send-email-hdegoede@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-03-27qemu-char: Cleanup: consolidate fe_open/fe_close into fe_set_openHans de Goede
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Message-id: 1364292483-16564-6-git-send-email-hdegoede@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-03-27qemu-char: Automatically do fe_open / fe_close on qemu_chr_add_handlersHans de Goede
Most frontends can't really determine if the guest actually has the frontend side open. So lets automatically generate fe_open / fe_close as soon as a frontend becomes ready (as signalled by calling qemu_chr_add_handlers) / becomes non ready (as signalled by setting all handlers to NULL). And allow frontends which can actually determine if the guest is listening to opt-out of this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Message-id: 1364292483-16564-5-git-send-email-hdegoede@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-03-27qemu-char: Add fe_open trackingHans de Goede
Add tracking of the fe_open state to struct CharDriverState. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Message-id: 1364292483-16564-4-git-send-email-hdegoede@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-03-27qemu-char: Rename qemu_chr_generic_open to qemu_chr_be_generic_openHans de Goede
To better reflect that it is for handling a backend being opened. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Message-id: 1364292483-16564-3-git-send-email-hdegoede@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-03-27qemu-char: Rename opened to be_openHans de Goede
Rename the opened variable to be_open to reflect that it contains the opened state of the backend. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Message-id: 1364292483-16564-2-git-send-email-hdegoede@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-03-27compiler: fix warning with GCC 4.8.0Paolo Bonzini
GCC 4.8.0 introduces a new warning: block/qcow2-snapshot.c: In function 'qcow2_write_snapshots’: block/qcow2-snapshot.c:252:18: error: typedef 'qemu_build_bug_on__253' locally defined but not used [-Werror=unused-local-typedefs] QEMU_BUILD_BUG_ON(offsetof(QCowHeader, snapshots_offset) != ^ cc1: all warnings being treated as errors (Caret diagnostics aren't perfect yet with macros... :)) Work around it with __attribute__((unused)). Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1364391272-1128-1-git-send-email-pbonzini@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-03-26Merge remote-tracking branch 'mst/tags/for_anthony' into stagingAnthony Liguori
virtio,pci,qom Work by Alex to support VGA assignment, pci and virtio fixes by Stefan, Jason and myself, and a new qmp event for hotplug support by myself. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Tue 26 Mar 2013 02:02:24 PM CDT using RSA key ID D28D5469 # gpg: Can't check signature: public key not found # By Alex Williamson (13) and others # Via Michael S. Tsirkin * mst/tags/for_anthony: (23 commits) pcie: Add endpoint capability initialization wrapper roms: switch oldnoconfig to olddefconfig pcie: Mangle types to match topology pci: Create and use API to determine root buses pci: Create pci_bus_is_express helper pci: Q35, Root Ports, and Switches create PCI Express buses pci: Allow PCI bus creation interfaces to specify the type of bus pci: Move PCI and PCIE type defines pci: Create and register a new PCI Express TypeInfo exec: assert that RAMBlock size is non-zero pci: refuse empty ROM files pci_bridge: Remove duplicate IRQ swizzle function pci_bridge: Use a default map_irq function pci: Fix INTx routing notifier recursion pci_bridge: drop formatting from source pci_bridge: factor out common code pci: Teach PCI Bridges about VGA routing pci: Add PCI VGA helpers virtio-pci: guest notifier mask without non-irqfd virtio-net: remove layout assumptions for mq ctrl ...
2013-03-26Merge remote-tracking branch 'quintela/migration.next' into stagingAnthony Liguori
# By Peter Lieven (9) and others # Via Juan Quintela * quintela/migration.next: (22 commits) Use qemu_put_buffer_async for guest memory pages Add qemu_put_buffer_async Use writev ops if available Store the data to send also in iovec Update bytes_xfer in qemu_put_byte Add socket_writev_buffer function Add QemuFileWritevBuffer QemuFileOps migration: use XBZRLE only after bulk stage migration: do not search dirty pages in bulk stage migration: do not sent zero pages in bulk stage migration: add an indicator for bulk state of ram migration migration: search for zero instead of dup pages bitops: unroll while loop in find_next_bit() buffer_is_zero: use vector optimizations if possible cutils: add a function to find non-zero content in a buffer move vector definitions to qemu-common.h savevm: Fix bugs in the VMSTATE_VBUFFER_MULTIPLY definition savevm: Add VMSTATE_STRUCT_VARRAY_POINTER_UINT32 savevm: Add VMSTATE_FLOAT64 helpers savevm: Add VMSTATE_UINTTL_EQUAL helper ...
2013-03-26char: introduce a blocking version of qemu_chr_fe_writeAnthony Liguori
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-03-26Add qemu_put_buffer_asyncOrit Wasserman
This allows us to add a buffer to the iovec to send without copying it into the static buffer, the buffer will be sent later when qemu_fflush is called. Signed-off-by: Orit Wasserman <owasserm@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-26Add QemuFileWritevBuffer QemuFileOpsOrit Wasserman
This will allow us to write an iovec Signed-off-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-26migration: do not sent zero pages in bulk stagePeter Lieven
during bulk stage of ram migration if a page is a zero page do not send it at all. the memory at the destination reads as zero anyway. even if there is an madvise with QEMU_MADV_DONTNEED at the target upon receipt of a zero page I have observed that the target starts swapping if the memory is overcommitted. it seems that the pages are dropped asynchronously. this patch also updates QMP to return the number of skipped pages in MigrationStats. Signed-off-by: Peter Lieven <pl@kamp.de> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-26cutils: add a function to find non-zero content in a bufferPeter Lieven
this adds buffer_find_nonzero_offset() which is a SSE2/Altivec optimized function that searches for non-zero content in a buffer. the function starts full unrolling only after the first few chunks have been checked one by one. analyzing real memory page data has revealed that non-zero pages are non-zero within the first 256-512 bits in most cases. as this function is also heavily used to check for zero memory pages this tweak has been made to avoid the high setup costs of the fully unrolled check for non-zero pages. due to the optimizations used in the function there are restrictions on buffer address and search length. the function can_use_buffer_find_nonzero_content() can be used to check if the function can be used safely. Signed-off-by: Peter Lieven <pl@kamp.de> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-26move vector definitions to qemu-common.hPeter Lieven
vector optimizations will now be used at various places not just in is_dup_page() in arch_init.c Signed-off-by: Peter Lieven <pl@kamp.de> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-26savevm: Fix bugs in the VMSTATE_VBUFFER_MULTIPLY definitionDavid Gibson
The VMSTATE_BUFFER_MULTIPLY macro is misnamed - it actually specifies a variably sized buffer with VMS_VBUFFER, so should be named VMSTATE_VBUFFER_MULTIPLY. This patch fixes this (the macro had no current users under either name). In addition, unlike the other VMSTATE_VBUFFER variants, this macro did not specify VMS_POINTER. This patch fixes this bug as well. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-26savevm: Add VMSTATE_STRUCT_VARRAY_POINTER_UINT32David Gibson
Currently the savevm code contains a VMSTATE_STRUCT_VARRAY_POINTER_INT32 helper (a variably sized array with the number of elements in an int32_t), but not VMSTATE_STRUCT_VARRAY_POINTER_UINT32 (... with the number of elements in a uint32_t). This patch (trivially) fixes the deficiency. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-26savevm: Add VMSTATE_FLOAT64 helpersDavid Gibson
The current savevm code includes VMSTATE helpers for a number of commonly used data types, but not for the float64 type used by the internal floating point emulation code. This patch fixes the deficiency. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-26savevm: Add VMSTATE_UINTTL_EQUAL helperDavid Gibson
This adds an _EQUAL VMSTATE helper for target_ulongs, defined in terms of VMSTATE_UINT32_EQUAL or VMSTATE_UINT64_EQUAL as appropriate. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-26savevm: Add VMSTATE_UINT64_EQUAL helpersDavid Gibson
The savevm code already includes a number of *_EQUAL helpers which act as sanity checks verifying that the configuration of the saved state matches that of the machine we're loading into to work. Variants already exist for 8 bit 16 bit and 32 bit integers, but not 64 bit integers. This patch fills that hole, adding a UINT64 version. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-25Merge remote-tracking branch 'stefanha/net' into stagingAnthony Liguori
# By Dmitry Fleytman (5) and others # Via Stefan Hajnoczi * stefanha/net: net: increase buffer size to accommodate Jumbo frame pkts VMXNET3 device implementation Packet abstraction for VMWARE network devices Common definitions for VMWARE devices net: iovec checksum calculator Checksum-related utility functions net: use socket_set_nodelay() for -netdev socket
2013-03-25glib: add a compatibility interface for g_timeout_add_secondsAnthony Liguori
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-03-25net: increase buffer size to accommodate Jumbo frame pktsScott Feldman
Socket buffer sizes were hard-coded to 4K for VDE and socket netdevs. Bump this up to 68K (ala tap netdev) to handle maximum GSO packet size (64k) plus plenty of room for the ethernet and virtio_net headers. Originally, ran into this limitation when using -netdev UDP sockets to connect VM-to-VM, where VM interface is configure with MTU=9000. (Using virtio_net NIC model). Test is simple: ping -M do -s 8500 <target>. This test will attempt to ping with unfragmented packet of given size. Without patch, size is limited to < 4K (minus protocol hdrs). With patch, ping test works with pkt size up to 9000 (again, minus protocol hdrs). v2: per Stefan, increase buf size to (4096+65536) as done in tap and apply to vde and socket netdevs. v1: increase buf size to 12K just for -netdev UDP sockets Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-25Common definitions for VMWARE devicesDmitry Fleytman
Signed-off-by: Dmitry Fleytman <dmitry@daynix.com> Signed-off-by: Yan Vugenfirer <yan@daynix.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-25net: iovec checksum calculatorDmitry Fleytman
Signed-off-by: Dmitry Fleytman <dmitry@daynix.com> Signed-off-by: Yan Vugenfirer <yan@daynix.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-25Checksum-related utility functionsDmitry Fleytman
net_checksum_add_cont() checksum calculation for scattered data with odd chunk sizes net_raw_checksum() checksum calculation for a buffer Signed-off-by: Dmitry Fleytman <dmitry@daynix.com> Signed-off-by: Yan Vugenfirer <yan@daynix.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-23Add sample moxie systemAnthony Green
Signed-off-by: Anthony Green <green@moxielogic.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-03-23Add moxie disassemblerAnthony Green
Signed-off-by: Anthony Green <green@moxielogic.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-03-22Merge remote-tracking branch 'kwolf/for-anthony' into stagingAnthony Liguori
# By Kevin Wolf (12) and Peter Lieven (2) # Via Kevin Wolf * kwolf/for-anthony: nbd: Check against invalid option combinations nbd: Use default port if only host is specified block: Allow omitting the file name when using driver-specific options block: Make find_image_format safe with NULL filename block: Rename variable to avoid shadowing block: Introduce .bdrv_parse_filename callback nbd: Accept -drive options for the network connection nbd: Remove unused functions nbd: Keep hostname and port separate qemu-socket: Make socket_optslist public block: Pass bdrv_file_open() options to block drivers block: Add options QDict to bdrv_file_open() prototypes block: complete all IOs before resizing a device Revert "block: complete all IOs before .bdrv_truncate"
2013-03-22block: Allow omitting the file name when using driver-specific optionsKevin Wolf
After this patch, using -drive with an empty file name continues to open the file if driver-specific options are used. If no driver-specific options are specified, the semantics stay as it was: It defines a drive without an inserted medium. In order to achieve this, bdrv_open() must be made safe to work with a NULL filename parameter. The assumption that is made is that only block drivers which implement bdrv_parse_filename() support using driver specific options and could therefore work without a filename. These drivers must make sure to cope with NULL in their implementation of .bdrv_open() (this is only NBD for now). For all other drivers, the block layer code will make sure to error out before calling into their code - they can't possibly work without a filename. Now an NBD connection can be opened like this: qemu-system-x86_64 -drive file.driver=nbd,file.port=1234,file.host=::1 Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2013-03-22block: Introduce .bdrv_parse_filename callbackKevin Wolf
If a driver needs structured data and not just a string, it can provide a .bdrv_parse_filename callback now that parses the command line string into separate options. Keeping this separate from .bdrv_open_filename ensures that the preferred way of directly specifying the options always works as well if parsing the string works. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2013-03-22nbd: Remove unused functionsKevin Wolf
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2013-03-22nbd: Keep hostname and port separateKevin Wolf
The NBD block supports an URL syntax, for which a URL parser returns separate hostname and port fields. It also supports the traditional qemu syntax encoded in a filename. Until now, after parsing the URL to get each piece of information, a new string is built to be fed to socket functions. Instead of building a string in the URL case that is immediately parsed again, parse the string in both cases and use the QemuOpts interface to qemu-sockets.c. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>