aboutsummaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2017-01-27hw/isa/lpc_ich9: add broadcast SMI featureLaszlo Ersek
The generic edk2 SMM infrastructure prefers EFI_SMM_CONTROL2_PROTOCOL.Trigger() to inject an SMI on each processor. If Trigger() only brings the current processor into SMM, then edk2 handles it in the following ways: (1) If Trigger() is executed by the BSP (which is guaranteed before ExitBootServices(), but is not necessarily true at runtime), then: (a) If edk2 has been configured for "traditional" SMM synchronization, then the BSP sends directed SMIs to the APs with APIC delivery, bringing them into SMM individually. Then the BSP runs the SMI handler / dispatcher. (b) If edk2 has been configured for "relaxed" SMM synchronization, then the APs that are not already in SMM are not brought in, and the BSP runs the SMI handler / dispatcher. (2) If Trigger() is executed by an AP (which is possible after ExitBootServices(), and can be forced e.g. by "taskset -c 1 efibootmgr"), then the AP in question brings in the BSP with a directed SMI, and the BSP runs the SMI handler / dispatcher. The smaller problem with (1a) and (2) is that the BSP and AP synchronization is slow. For example, the "taskset -c 1 efibootmgr" command from (2) can take more than 3 seconds to complete, because efibootmgr accesses non-volatile UEFI variables intensively. The larger problem is that QEMU's current behavior diverges from the behavior usually seen on physical hardware, and that keeps exposing obscure corner cases, race conditions and other instabilities in edk2, which generally expects / prefers a software SMI to affect all CPUs at once. Therefore introduce the "broadcast SMI" feature that causes QEMU to inject the SMI on all VCPUs. While the original posting of this patch <http://lists.nongnu.org/archive/html/qemu-devel/2015-10/msg05658.html> only intended to speed up (2), based on our recent "stress testing" of SMM this patch actually provides functional improvements. Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20170126014416.11211-3-lersek@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-27hw/isa/lpc_ich9: add SMI feature negotiation via fw_cfgLaszlo Ersek
Introduce the following fw_cfg files: - "etc/smi/supported-features": a little endian uint64_t feature bitmap, presenting the features known by the host to the guest. Read-only for the guest. The content of this file will be determined via bit-granularity ICH9-LPC device properties, to be introduced later. For now, the bitmask is left zeroed. The bits will be set from machine type compat properties and on the QEMU command line, hence this file is not migrated. - "etc/smi/requested-features": a little endian uint64_t feature bitmap, representing the features the guest would like to request. Read-write for the guest. The guest can freely (re)write this file, it has no direct consequence. Initial value is zero. A nonzero value causes the SMI-related fw_cfg files and fields that are under guest influence to be migrated. - "etc/smi/features-ok": contains a uint8_t value, and it is read-only for the guest. When the guest selects the associated fw_cfg key, the guest features are validated against the host features. In case of error, the negotiation doesn't proceed, and the "features-ok" file remains zero. In case of success, the "features-ok" file becomes (uint8_t)1, and the negotiated features are locked down internally (to which no further changes are possible until reset). The initial value is zero. A nonzero value causes the SMI-related fw_cfg files and fields that are under guest influence to be migrated. The C-language fields backing the "supported-features" and "requested-features" files are uint8_t arrays. This is because they carry guest-side representation (our choice is little endian), while VMSTATE_UINT64() assumes / implies host-side endianness for any uint64_t fields. If we migrate a guest between hosts with different endiannesses (which is possible with TCG), then the host-side value is preserved, and the host-side representation is translated. This would be visible to the guest through fw_cfg, unless we used plain byte arrays. So we do. Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20170126014416.11211-2-lersek@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-27memory: hmp: add "-f" for "info mtree"Peter Xu
Adding one more option "-f" for "info mtree" to dump the flat views of all the address spaces. This will be useful to debug the memory rendering logic, also it'll be much easier with it to know what memory region is handling what address range. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <1484556005-29701-3-git-send-email-peterx@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-27apic: save apic_delivered flagPavel Dovgalyuk
This patch implements saving/restoring of static apic_delivered variable. v8: saving static variable only for one of the APICs Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Message-Id: <20170126123429.5412.94368.stgit@PASHA-ISP> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-27replay: save/load initial statePavel Dovgalyuk
This patch implements initial vmstate creation or loading at the start of record/replay. It is needed for rewinding the execution in the replay mode. v4 changes: - snapshots are not created by default anymore v3 changes: - added rrsnapshot option Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Message-Id: <20170124071746.4572.61449.stgit@PASHA-ISP> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-27savevm: add public save_vmstate functionPavel Dovgalyuk
This patch introduces save_vmstate function to allow saving and loading vmstates from the replay module. Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Message-Id: <20170124071741.4572.13714.stgit@PASHA-ISP> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-26hbitmap: Add hbitmap_is_serializable()Max Reitz
Bitmaps with a granularity of 58 or above can be neither serialized nor deserialized (see the comment in the function added in this series for an explanation). This patch adds a function so that we can check whether a bitmap actually can be (de-)serialized at all, thus avoiding failing the necessary assertion in hbitmap_serialization_granularity(). Signed-off-by: Max Reitz <mreitz@redhat.com> Message-Id: <20161115225746.3590-2-mreitz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com>
2017-01-25Merge remote-tracking branch 'remotes/rth/tags/pull-nios-20170124' into stagingPeter Maydell
nios2 target support # gpg: Signature made Tue 24 Jan 2017 21:11:47 GMT # gpg: using RSA key 0xAD1270CC4DD0279B # gpg: Good signature from "Richard Henderson <rth7680@gmail.com>" # gpg: aka "Richard Henderson <rth@redhat.com>" # gpg: aka "Richard Henderson <rth@twiddle.net>" # Primary key fingerprint: 9CB1 8DDA F8E8 49AD 2AFC 16A4 AD12 70CC 4DD0 279B * remotes/rth/tags/pull-nios-20170124: nios2: Add support for Nios-II R1 nios2: Add Altera 10M50 GHRD emulation nios2: Add periodic timer emulation nios2: Add IIC interrupt controller emulation nios2: Add usermode binaries emulation nios2: Add disas entries nios2: Add architecture emulation support Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-25Merge remote-tracking branch 'remotes/mjt/tags/trivial-patches-fetch' into ↵Peter Maydell
staging trivial patches for 2017-01-24 # gpg: Signature made Tue 24 Jan 2017 20:27:08 GMT # gpg: using RSA key 0x701B4F6B1A693E59 # gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>" # gpg: aka "Michael Tokarev <mjt@corpit.ru>" # gpg: aka "Michael Tokarev <mjt@debian.org>" # Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D 4324 457C E0A0 8044 65C5 # Subkey fingerprint: 7B73 BAD6 8BE7 A2C2 8931 4B22 701B 4F6B 1A69 3E59 * remotes/mjt/tags/trivial-patches-fetch: (31 commits) hw/isa/isa-bus: Set category of the "isabus-bridge" device usb: Set category and description of the MTP device gdbstub.c: update old error report statements gdbstub.c: fix GDB connection segfault caused by empty machines scsi-disk: add 'fall through' comment to switch VERIFY cases Drop duplicate display option documentation hw/display/framebuffer.c: Avoid overflow for framebuffers > 4GB win32: use glib gpoll if glib >= 2.50 util/mmap-alloc: refactor a little bit for readability util/mmap-alloc: check parameter before using vfio: remove a duplicated word in comments docs: sync pci-ids.txt disas/cris.c: Fix Coverity warning about unchecked NULL lm32: milkymist-tmu2: fix another integer overflow hw/i386/kvmvapic: Remove dead code in patch_hypercalls() doc/usb2: fix typo qga: fix erroneous argument to strerror block: remove dead check pci-assign: avoid pointless stat qemu-img: remove dead check ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-24nios2: Add support for Nios-II R1Marek Vasut
Add remaining bits of the Altera NiosII R1 support into qemu, which is documentation, MAINTAINERS file entry, configure bits, arch_init and configuration files for both linux-user (userland binaries) and softmmu (hardware emulation). Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chris Wulff <crwulff@gmail.com> Cc: Jeff Da Silva <jdasilva@altera.com> Cc: Ley Foon Tan <lftan@altera.com> Cc: Sandra Loosemore <sandra@codesourcery.com> Cc: Yves Vandervennet <yvanderv@altera.com> Reviewed-by: Alexander Graf <agraf@suse.de> Message-Id: <20170118220146.489-8-marex@denx.de> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-24nios2: Add usermode binaries emulationMarek Vasut
Add missing bits for qemu-user required for emulating Altera Nios2 userspace binaries. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chris Wulff <crwulff@gmail.com> Cc: Jeff Da Silva <jdasilva@altera.com> Cc: Ley Foon Tan <lftan@altera.com> Cc: Sandra Loosemore <sandra@codesourcery.com> Cc: Yves Vandervennet <yvanderv@altera.com> Reviewed-by: Alexander Graf <agraf@suse.de> Message-Id: <20170118220146.489-4-marex@denx.de> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-24nios2: Add disas entriesMarek Vasut
Add nios2 disassembler support. This patch is composed from binutils files from commit "Opcodes and assembler support for Nios II R2". The files from binutils used in this patch are: include/opcode/nios2.h include/opcode/nios2r1.h include/opcode/nios2r2.h opcodes/nios2-opc.c opcodes/nios2-dis.c Checkpatch says total: 114 errors, 0 warnings, 3609 lines checked , which is caused by a different coding style in those files. These warnings and errors are not addressed To let these files be easily synchronized between binutils and qemu. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chris Wulff <crwulff@gmail.com> Cc: Jeff Da Silva <jdasilva@altera.com> Cc: Ley Foon Tan <lftan@altera.com> Cc: Sandra Loosemore <sandra@codesourcery.com> Cc: Yves Vandervennet <yvanderv@altera.com> Reviewed-by: Alexander Graf <agraf@suse.de> Message-Id: <20170118220146.489-2-marex@denx.de> Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-24win32: use glib gpoll if glib >= 2.50Marc-André Lureau
A fix has been committed in upstream glib commit 210a9796f78eb90f76f1bd6a304e9fea05e97617. (See also related bug https://bugzilla.gnome.org/show_bug.cgi?id=764415) It is desirable to use the glib version instead of qemu copy, since it provides more debugging facilities (G_MAIN_POLL_DEBUG etc), and hopefully has a better maintainance. Hopefully, we can drop the qemu copy in a few years. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-01-24object: make some funcs staticMarc-André Lureau
There is no need to have those functions as public API. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-01-24object.h: spelling fixMarc-André Lureau
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-01-24include: Fix typos found by codespellStefan Weil
Add also a missing parenthesis in a comment. Signed-off-by: Stefan Weil <sw@weilnetz.de> Acked-by: Alistair Francis <alistair.francis@xilinx.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-01-24PCI/migration merge vmstate_pci_device and vmstate_pcie_deviceDr. David Alan Gilbert
The vmstate_pci_device and vmstate_pcie_devices differ just in the size of one buffer; combine the two using a _TEST macro. I think this is safe as long as everywhere which currently uses either of these two uses the right type. One thing that concerns me is that some places use pci_device_load/save which does some irq mangling, but others just use the VMSTATE_PCI_DEVICE macro - how are they getting the same irq mangling? This passes a smoke test migrate of: ./x86_64-softmmu/qemu-system-x86_64 -M pc,accel=kvm -m 1024 ./littlefed20.img -device e1000e -device virtio-net -device e1000 -device virtio-rng -device megasas -device megasas-gen2 -device ioh3420 -device nec-usb-xhci to an unmodified qemu. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20161214195829.18241-1-dgilbert@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-01-24migration: re-active images while migration been canceled after inactive themzhanghailiang
commit fe904ea8242cbae2d7e69c052c754b8f5f1ba1d6 fixed a case which migration aborted QEMU because it didn't regain the control of images while some errors happened. Actually, there are another two cases can trigger the same error reports: " bdrv_co_do_pwritev: Assertion `!(bs->open_flags & 0x0800)' failed", Case 1, codes path: migration_thread() migration_completion() bdrv_inactivate_all() ----------------> inactivate images qemu_savevm_state_complete_precopy() socket_writev_buffer() --------> error because destination fails qemu_fflush() ----------------> set error on migration stream -> qmp_migrate_cancel() ----------------> user cancelled migration concurrently -> migrate_set_state() ------------------> set migrate CANCELLIN migration_completion() -----------------> go on to fail_invalidate if (s->state == MIGRATION_STATUS_ACTIVE) -> Jump this branch Case 2, codes path: migration_thread() migration_completion() bdrv_inactivate_all() ----------------> inactivate images migreation_completion() finished -> qmp_migrate_cancel() ---------------> user cancelled migration concurrently qemu_mutex_lock_iothread(); qemu_bh_schedule (s->cleanup_bh); As we can see from above, qmp_migrate_cancel can slip in whenever migration_thread does not hold the global lock. If this happens after bdrv_inactive_all() been called, the above error reports will appear. To prevent this, we can call bdrv_invalidate_cache_all() in qmp_migrate_cancel() directly if we find images become inactive. Besides, bdrv_invalidate_cache_all() in migration_completion() doesn't have the protection of big lock, fix it by add the missing qemu_mutex_lock_iothread(); Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Message-Id: <1485244792-11248-1-git-send-email-zhang.zhanghailiang@huawei.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-01-24migration: Fail migration blocker for --only-migratableAshijeet Acharya
migrate_add_blocker should rightly fail if the '--only-migratable' option was specified and the device in use should not be able to perform the action which results in an unmigratable VM. Make migrate_add_blocker return -EACCES in this case. Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com> Message-Id: <1484566314-3987-6-git-send-email-ashijeetacharya@gmail.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-01-24migration: disallow migrate_add_blocker during migrationAshijeet Acharya
If a migration is already in progress and somebody attempts to add a migration blocker, this should rightly fail. Add an errp parameter and a retcode return value to migrate_add_blocker. Signed-off-by: John Snow <jsnow@redhat.com> Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com> Message-Id: <1484566314-3987-5-git-send-email-ashijeetacharya@gmail.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Acked-by: Greg Kurz <groug@kaod.org> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Merged with recent 'Allow invtsc migration' change
2017-01-24migration: Add a new option to enable only-migratableAshijeet Acharya
Add a new option "--only-migratable" in qemu which will allow to add only those devices which will not fail qemu after migration. Devices set with the flag 'unmigratable' cannot be added when this option will be used. Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com> Message-Id: <1484566314-3987-3-git-send-email-ashijeetacharya@gmail.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-01-24migration: migrate QTAILQJianjun Duan
Currently we cannot directly transfer a QTAILQ instance because of the limitation in the migration code. Here we introduce an approach to transfer such structures. We created VMStateInfo vmstate_info_qtailq for QTAILQ. Similar VMStateInfo can be created for other data structures such as list. When a QTAILQ is migrated from source to target, it is appended to the corresponding QTAILQ structure, which is assumed to have been properly initialized. This approach will be used to transfer pending_events and ccs_list in spapr state. We also create some macros in qemu/queue.h to access a QTAILQ using pointer arithmetic. This ensures that we do not depend on the implementation details about QTAILQ in the migration code. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Jianjun Duan <duanj@linux.vnet.ibm.com> Message-Id: <1484852453-12728-3-git-send-email-duanj@linux.vnet.ibm.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-01-24migration: extend VMStateInfoJianjun Duan
Current migration code cannot handle some data structures such as QTAILQ in qemu/queue.h. Here we extend the signatures of put/get in VMStateInfo so that customized handling is supported. put now will return int type. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Jianjun Duan <duanj@linux.vnet.ibm.com> Message-Id: <1484852453-12728-2-git-send-email-duanj@linux.vnet.ibm.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-01-23machine: Make possible_cpu_arch_ids() return const pointerIgor Mammedov
make sure that external callers won't try to modify possible_cpus and owner of possible_cpus can access it directly when it modifies it. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <1484759609-264075-5-git-send-email-imammedo@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-01-23arch_init: Remove unnecessary default_config_files tableEduardo Habkost
The existing default_config_files table in arch_init.c has a single entry, making it completely unnecessary. The whole code can be replaced by a single qemu_read_config_file() call in vl.c. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20170117180051.11958-1-ehabkost@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-01-23io: introduce a DNS resolver APIDaniel P. Berrange
Currently DNS resolution is done automatically as part of the creation of a QIOChannelSocket object instance. This works ok for network clients where you just end up a single network socket, but for servers, the results of DNS resolution may require creation of multiple sockets. Introducing a DNS resolver API allows DNS resolution to be separated from the socket object creation. This will make it practical to create multiple QIOChannelSocket instances for servers. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2017-01-23io: remove Error parameter from QIOTask thread workerDaniel P. Berrange
Now that task objects have a directly associated error, there's no need for an an Error **errp parameter to the QIOTask thread worker function. It already has a QIOTask object, so can directly set the error on it. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2017-01-23io: change the QIOTask callback signatureDaniel P. Berrange
Currently the QIOTaskFunc signature takes an Object * for the source, and an Error * for any error. We also need to be able to provide a result pointer. Rather than continue to add parameters to QIOTaskFunc, remove the existing ones and simply pass the QIOTask object instead. This has methods to access all the other data items required in the callback impl. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2017-01-23io: add ability to associate an error with a taskDaniel P. Berrange
Currently when a task fails, the error is never explicitly associated with the task object, it is just passed along through the completion callback. This adds the ability to explicitly associate an error with the task. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2017-01-23io: add ability to associate an opaque "result" with with a taskDaniel P. Berrange
Currently there is no data associated with a successful task completion. This adds an opaque pointer to the task to store an arbitrary result. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2017-01-23io: fix typo in docs for QIOTaskDaniel P. Berrange
The GDestroyNotify parameter is already a pointer, so does not need a '*' suffix on the type. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2017-01-23io: stop incrementing reference in qio_task_get_sourceDaniel P. Berrange
Incrementing the reference in qio_task_get_source is not necessary, since we're not running concurrently with any other code touching the QIOTask. This minimizes chances of further memory leaks. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2017-01-20Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
* QOM interface fix (Eduardo) * RTC fixes (Gaohuai, Igor) * Memory leak fixes (Li Qiang, me) * Ctrl-a b regression (Marc-André) * Stubs cleanups and fixes (Leif, me) * hxtool tweak (me) * HAX support (Vincent) * QemuThread, exec.c and SCSI fixes (Roman, Xinhua, me) * PC_COMPAT_2_8 fix (Marcelo) * stronger bitmap assertions (Peter) # gpg: Signature made Fri 20 Jan 2017 12:49:01 GMT # gpg: using RSA key 0xBFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (35 commits) pc.h: move x-mach-use-reliable-get-clock compat entry to PC_COMPAT_2_8 bitmap: assert that start and nr are non negative Revert "win32: don't run subprocess tests on Mingw32 platform" hax: add Darwin support Plumb the HAXM-based hardware acceleration support target/i386: Add Intel HAX files kvm: move cpu synchronization code KVM: PPC: eliminate unnecessary duplicate constants ramblock-notifier: new char: fix ctrl-a b not working exec: Add missing rcu_read_unlock x86: ioapic: fix fail migration when irqchip=split x86: ioapic: dump version for "info ioapic" x86: ioapic: add traces for ioapic hxtool: emit Texinfo headings as @subsection qemu-thread: fix qemu_thread_set_name() race in qemu_thread_create() serial: fix memory leak in serial exit scsi-block: fix direction of BYTCHK test for VERIFY commands pc: fix crash in rtc_set_memory() if initial cpu is marked as hotplugged acpi: filter based on CONFIG_ACPI_X86 rather than TARGET ... # Conflicts: # include/hw/i386/pc.h
2017-01-20Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20170120-v2' into ↵Peter Maydell
staging First set of s390x patches for 2.9: - rework of the zpci code, giving us proper multibus support - introduction of the 2.9 machine - fixes and improvements # gpg: Signature made Fri 20 Jan 2017 09:11:58 GMT # gpg: using RSA key 0xDECF6B93C6F02FAF # gpg: Good signature from "Cornelia Huck <huckc@linux.vnet.ibm.com>" # gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>" # Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF * remotes/cohuck/tags/s390x-20170120-v2: virtio-ccw: fix ring sizing s390x/pci: merge msix init functions s390x/pci: handle PCIBridge bus number s390x/pci: use hashtable to look up zpci via fh s390x/pci: PCI multibus bridge handling s390x/pci: optimize calling s390_get_phb() s390x/pci: change the device array to a list s390x/pci: dynamically allocate iommu s390x/pci: make S390PCIIOMMU inherit Object s390x/kvm: use kvm_gsi_routing_enabled in flic s390x: add compat machine for 2.9 s390x: remove double compat statement Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-20Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into ↵Peter Maydell
staging # gpg: Signature made Fri 20 Jan 2017 02:58:57 GMT # gpg: using RSA key 0xEF04965B398D6211 # gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211 * remotes/jasowang/tags/net-pull-request: tap: fix memory leak on failure in net_init_tap() hw/pci: use-after-free in pci_nic_init_nofail when nic device fails to initialize hw/net/dp8393x: Avoid unintentional sign extensions on addresses m68k: QOMify the MCF Fast Ethernet Controller device net: optimize checksum computation docs: Fix description of the sentence Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-20Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
virtio, vhost, pc: fixes, features writeable fw cfg blobs which will be used for guest to host communication fixes and cleanups all over the place Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Thu 19 Jan 2017 21:08:04 GMT # gpg: using RSA key 0x281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: virtio: force VIRTIO_F_IOMMU_PLATFORM virtio: fix up max size checks vhost: drop VHOST_F_DEVICE_IOTLB update-linux-headers.sh: support __bitwise virtio_crypto: header update pci_regs: update to latest linux virtio-mmio: switch to linux headers virtio_mmio: add standard header file virtio: drop an obsolete comment fw-cfg: bump "x-file-slots" to 0x20 for 2.9+ machine types pc: Add 2.9 machine-types fw-cfg: turn FW_CFG_FILE_SLOTS into a device property fw-cfg: support writeable blobs vhost_net: device IOTLB support virtio: disable notifications again after poll succeeded Revert "virtio: turn vq->notification into a nested counter" virtio-net: enable ioeventfd even if vhost=off Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-20Merge remote-tracking branch 'remotes/armbru/tags/pull-error-2017-01-19' ↵Peter Maydell
into staging Error reporting patches for 2017-01-19 # gpg: Signature made Thu 19 Jan 2017 14:51:17 GMT # gpg: using RSA key 0x3870B400EB918653 # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" # Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653 * remotes/armbru/tags/pull-error-2017-01-19: error: Report certain hints on stderr when no monitor error: error_setg_errno(): errno gets preserved Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-20pc.h: move x-mach-use-reliable-get-clock compat entry to PC_COMPAT_2_8Marcelo Tosatti
As noticed by David Gilbert, commit 6053a86 'kvmclock: reduce kvmclock differences on migration' added 'x-mach-use-reliable-get-clock' and a compatibility entry that turns it off; however it got merged after 2.8.0 was released but the entry has gone into PC_COMPAT_2_7 where it should have gone into PC_COMPAT_2_8. Fix it by moving the entry to PC_COMPAT_2_8. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20170118175343.GA26873@amt.cnet> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-20hw/arm/virt: Add board property to enable EL2Peter Maydell
Add a board level property to the virt board which will enable EL2 on the CPU if the user asks for it. The default is not to provide EL2. If EL2 is enabled then we will use SMC as our PSCI conduit, and report the virtualization support in the GICv3 device tree node and the ACPI tables. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 1483977924-14522-19-git-send-email-peter.maydell@linaro.org
2017-01-20hw/arm/virt: Support using SMC for PSCIPeter Maydell
If we are giving the guest a CPU with EL2, it is likely to want to use the HVC instruction itself, for instance for providing PSCI to inner guest VMs. This makes using HVC as the PSCI conduit for the outer QEMU a bad idea. We will want to use SMC instead is this case: this makes sense because QEMU's PSCI implementation is effectively an emulation of functionality provided by EL3 firmware. Add code to support selecting the PSCI conduit to use, rather than hardcoding use of HVC. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Message-id: 1483977924-14522-15-git-send-email-peter.maydell@linaro.org
2017-01-20hw/intc/arm_gicv3: Implement gicv3_cpuif_virt_update()Peter Maydell
Implement the function which signals virtual interrupts to the CPU as appropriate following CPU interface state changes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1483977924-14522-13-git-send-email-peter.maydell@linaro.org
2017-01-20hw/intc/gicv3: Add data fields for virtualization supportPeter Maydell
As the first step in adding support for the virtualization extensions to the GICv3 emulation: * add the necessary data fields to the state structures * add the fields to the migration state, as a subsection which is only present if virtualization is enabled The use of a subsection means we retain migration compatibility as EL2 is not enabled on any CPUs currently. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 1483977924-14522-8-git-send-email-peter.maydell@linaro.org
2017-01-20hw/arm/virt: Wire VIRQ, VFIQ, maintenance irq lines from GIC to CPUPeter Maydell
Wire the new VIRQ, VFIQ and maintenance interrupt lines from the GIC to each CPU. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 1483977924-14522-5-git-send-email-peter.maydell@linaro.org
2017-01-20hw/intc/arm_gic: Add external IRQ lines for VIRQ and VFIQPeter Maydell
Augment the GIC's QOM device interface by adding two new sets of sysbus IRQ lines, to signal VIRQ and VFIQ to each CPU. We never use these, but it's helpful to keep the v2-and-earlier GIC's external interface in line with that of the GICv3 to avoid board code having to add extra code conditional on which version of the GIC is in use. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 1483977924-14522-3-git-send-email-peter.maydell@linaro.org
2017-01-20hw/intc/arm_gicv3: Add external IRQ lines for VIRQ and VFIQPeter Maydell
Augment the GICv3's QOM device interface by adding two new sets of sysbus IRQ lines, to signal VIRQ and VFIQ to each CPU. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 1483977924-14522-2-git-send-email-peter.maydell@linaro.org
2017-01-20aspeed/smc: handle SPI flash Command modeCédric Le Goater
The Aspeed SMC controllers have a mode (Command mode) in which accesses to the flash content are no different than doing MMIOs. The controller generates all the necessary commands to load (or store) data in memory. However, accesses are restricted to the segment window assigned the the flash module by the controller. This window is defined by the Segment Address Register. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1483979087-32663-8-git-send-email-clg@kaod.org [PMM: Deleted now-unused aspeed_smc_is_usermode() function] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-20aspeed/smc: adjust the size of the register regionCédric Le Goater
The SPI controller of the AST2400 SoC has less registers. So we can adjust the size of the memory region holding the registers depending on the controller type. We can also remove the guest_error logging which is useless as the range of the region is strict enough. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 1483979087-32663-7-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-20aspeed/smc: unfold the AspeedSMCController arrayCédric Le Goater
This is getting difficult to read. Also add a 'has_dma' field for each controller type. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1483979087-32663-6-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-20virtio-ccw: fix ring sizingMichael S. Tsirkin
Current code seems to assume ring size is always decreased but this is not required by spec: what spec says is just that size can not exceed the maximum. Fix it up. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <1484256243-1982-1-git-send-email-mst@redhat.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2017-01-20m68k: QOMify the MCF Fast Ethernet Controller deviceThomas Huth
When running qemu-system-m68k with the "-net" parameter (for example simply "-net nic -net user"), there is currently a confusing warning message saying: Warning: requested NIC (anonymous, model mcf_fec) was not created (not supported by this machine?) This seems to happen because the MCF NIC has never been adapted to the currently expected QEMU device behavior. Thus let's QOMify the NIC now to get rid of the warning message. Signed-off-by: Thomas Huth <huth@tuxfamily.org> Signed-off-by: Jason Wang <jasowang@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-02-21 17:29:50 +0000