aboutsummaryrefslogtreecommitdiff
path: root/include/sysemu
AgeCommit message (Collapse)Author
2022-07-12block: Add a 'flags' param to blk_pread()Alberto Faria
For consistency with other I/O functions, and in preparation to implement it using generated_co_wrapper. Callers were updated using this Coccinelle script: @@ expression blk, offset, buf, bytes; @@ - blk_pread(blk, offset, buf, bytes) + blk_pread(blk, offset, buf, bytes, 0) It had no effect on hw/block/nand.c, presumably due to the #if, so that file was updated manually. Overly-long lines were then fixed by hand. Signed-off-by: Alberto Faria <afaria@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Greg Kurz <groug@kaod.org> Reviewed-by: Hanna Reitz <hreitz@redhat.com> Message-Id: <20220705161527.1054072-3-afaria@redhat.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-06-24block: get rid of blk->guest_block_sizeStefan Hajnoczi
Commit 1b7fd729559c ("block: rename buffer_alignment to guest_block_size") noted: At this point, the field is set by the device emulation, but completely ignored by the block layer. The last time the value of buffer_alignment/guest_block_size was actually used was before commit 339064d50639 ("block: Don't use guest sector size for qemu_blockalign()"). This value has not been used since 2013. Get rid of it. Cc: Xie Yongji <xieyongji@bytedance.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20220518130945.2657905-1-stefanha@redhat.com> Reviewed-by: Paul Durrant <paul@xen.org> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Alberto Faria <afaria@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2022-06-16crypto: Introduce RSA algorithmzhenwei pi
There are two parts in this patch: 1, support akcipher service by cryptodev-builtin driver 2, virtio-crypto driver supports akcipher service In principle, we should separate this into two patches, to avoid compiling error, merge them into one. Then virtio-crypto gets request from guest side, and forwards the request to builtin driver to handle it. Test with a guest linux: 1, The self-test framework of crypto layer works fine in guest kernel 2, Test with Linux guest(with asym support), the following script test(note that pkey_XXX is supported only in a newer version of keyutils): - both public key & private key - create/close session - encrypt/decrypt/sign/verify basic driver operation - also test with kernel crypto layer(pkey add/query) All the cases work fine. Run script in guest: rm -rf *.der *.pem *.pfx modprobe pkcs8_key_parser # if CONFIG_PKCS8_PRIVATE_KEY_PARSER=m rm -rf /tmp/data dd if=/dev/random of=/tmp/data count=1 bs=20 openssl req -nodes -x509 -newkey rsa:2048 -keyout key.pem -out cert.pem -subj "/C=CN/ST=BJ/L=HD/O=qemu/OU=dev/CN=qemu/emailAddress=qemu@qemu.org" openssl pkcs8 -in key.pem -topk8 -nocrypt -outform DER -out key.der openssl x509 -in cert.pem -inform PEM -outform DER -out cert.der PRIV_KEY_ID=`cat key.der | keyctl padd asymmetric test_priv_key @s` echo "priv key id = "$PRIV_KEY_ID PUB_KEY_ID=`cat cert.der | keyctl padd asymmetric test_pub_key @s` echo "pub key id = "$PUB_KEY_ID keyctl pkey_query $PRIV_KEY_ID 0 keyctl pkey_query $PUB_KEY_ID 0 echo "Enc with priv key..." keyctl pkey_encrypt $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.priv echo "Dec with pub key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.priv enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Sign with priv key..." keyctl pkey_sign $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 hash=sha1 > /tmp/sig echo "Verify with pub key..." keyctl pkey_verify $PRIV_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 echo "Enc with pub key..." keyctl pkey_encrypt $PUB_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.pub echo "Dec with priv key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.pub enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Verify with pub key..." keyctl pkey_verify $PUB_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 Reviewed-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: lei he <helei.sig11@bytedance.com Signed-off-by: zhenwei pi <pizhenwei@bytedance.com> Message-Id: <20220611064243.24535-2-pizhenwei@bytedance.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-06hw/loongarch: Add support loongson3 virt machine type.Xiaojuan Yang
Emulate a 3A5000 board use the new loongarch instruction. 3A5000 belongs to the Loongson3 series processors. The board consists of a 3A5000 cpu model and the virt bridge. The host 3A5000 board is really complicated and contains many functions.Now for the tcg softmmu mode only part functions are emulated. More detailed info you can see https://github.com/loongson/LoongArch-Documentation Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn> Signed-off-by: Song Gao <gaosong@loongson.cn> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220606124333.2060567-31-yangxiaojuan@loongson.cn> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-06-06replay: rewrite async event handlingPavel Dovgalyuk
This patch decouples checkpoints and async events. It was a tricky part of replay implementation. Now it becomes much simpler and easier to maintain. Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru> Acked-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <165364837856.688121.8785039478408995979.stgit@pasha-ThinkPad-X280> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-06-06replay: notify vCPU when BH is scheduledPavel Dovgalyuk
vCPU execution should be suspended when new BH is scheduled. This is needed to avoid guest timeouts caused by the long cycles of the execution. In replay mode execution may hang when vCPU sleeps and block event comes to the queue. This patch adds notification which wakes up vCPU or interrupts execution of guest code. Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> -- v2: changed first_cpu to current_cpu (suggested by Richard Henderson) v4: moved vCPU notification to aio_bh_enqueue (suggested by Paolo Bonzini) Message-Id: <165364837317.688121.17680519919871405281.stgit@pasha-ThinkPad-X280> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-06-03ui: Switch "-display sdl" to use the QAPI parserThomas Huth
The "-display sdl" option still uses a hand-crafted parser for its parameters since we didn't want to drag an interface we considered somewhat flawed into the QAPI schema. Since the flaws are gone now, it's time to QAPIfy. This introduces the new "DisplaySDL" QAPI struct that is used to hold the parameters that are unique to the SDL display. The only specific parameter is currently "grab-mod" that is used to specify the required modifier keys to escape from the mouse grabbing mode. Message-Id: <20220519155625.1414365-3-thuth@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-05-12machine: use QAPI struct for boot configurationPaolo Bonzini
As part of converting -boot to a property with a QAPI type, define the struct and use it throughout QEMU to access boot configuration. machine_boot_parse takes care of doing the QemuOpts->QAPI conversion by hand, for now. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20220414165300.555321-2-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-05-11Clean up header guards that don't match their file nameMarkus Armbruster
Header guard symbols should match their file name to make guard collisions less likely. Cleaned up with scripts/clean-header-guards.pl, followed by some renaming of new guard symbols picked by the script to better ones. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20220506134911.2856099-2-armbru@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> [Change to generated file ebpf/rss.bpf.skeleton.h backed out]
2022-05-09Merge tag 'block-pull-request' of https://gitlab.com/stefanha/qemu into stagingRichard Henderson
Pull request - Add new thread-pool-min/thread-pool-max parameters to control the thread pool used for async I/O. - Fix virtio-scsi IOThread 100% CPU consumption QEMU 7.0 regression. # -----BEGIN PGP SIGNATURE----- # # iQEzBAABCAAdFiEEhpWov9P5fNqsNXdanKSrs4Grc8gFAmJ5DqgACgkQnKSrs4Gr # c8iAqAf/WEJzEso0Hu3UUYJi2lAXpLxWPjoNBlPdQlKIJ/I0zQIF0P7GeCifF+0l # iMjgBv0ofyAuV47gaTJlVrAR75+hJ/IXNDhnu3UuvNWfVOqvksgw6kuHkMo9A2hC # 4tIHEU9J8jbQSSdQTaZR8Zj4FX1/zcxMBAXT3YO3De6zo78RatBTuNP4dsZzt8bI # Qs1a4A0p2ScNXK8EcF4QwAWfoxu9OPPzN52DBCNxcIcnn0SUab4NbDxzpRV4ZhDP # 08WoafI5O+2Kb36QysJN01LqajHrClG/fozrPzBLq5aZUK3xewJGB1hEdGTLkkmz # NJNBg5Ldszwj4PDZ1dFU3/03aigb3g== # =t5eR # -----END PGP SIGNATURE----- # gpg: Signature made Mon 09 May 2022 05:52:56 AM PDT # gpg: using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full] # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full] * tag 'block-pull-request' of https://gitlab.com/stefanha/qemu: virtio-scsi: move request-related items from .h to .c virtio-scsi: clean up virtio_scsi_handle_cmd_vq() virtio-scsi: clean up virtio_scsi_handle_ctrl_vq() virtio-scsi: clean up virtio_scsi_handle_event_vq() virtio-scsi: don't waste CPU polling the event virtqueue virtio-scsi: fix ctrl and event handler functions in dataplane mode util/event-loop-base: Introduce options to set the thread pool size util/main-loop: Introduce the main loop into QOM Introduce event-loop-base abstract class Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-05-09util/event-loop-base: Introduce options to set the thread pool sizeNicolas Saenz Julienne
The thread pool regulates itself: when idle, it kills threads until empty, when in demand, it creates new threads until full. This behaviour doesn't play well with latency sensitive workloads where the price of creating a new thread is too high. For example, when paired with qemu's '-mlock', or using safety features like SafeStack, creating a new thread has been measured take multiple milliseconds. In order to mitigate this let's introduce a new 'EventLoopBase' property to set the thread pool size. The threads will be created during the pool's initialization or upon updating the property's value, remain available during its lifetime regardless of demand, and destroyed upon freeing it. A properly characterized workload will then be able to configure the pool to avoid any latency spikes. Signed-off-by: Nicolas Saenz Julienne <nsaenzju@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: Markus Armbruster <armbru@redhat.com> Message-id: 20220425075723.20019-4-nsaenzju@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2022-05-09util/main-loop: Introduce the main loop into QOMNicolas Saenz Julienne
'event-loop-base' provides basic property handling for all 'AioContext' based event loops. So let's define a new 'MainLoopClass' that inherits from it. This will permit tweaking the main loop's properties through qapi as well as through the command line using the '-object' keyword[1]. Only one instance of 'MainLoopClass' might be created at any time. 'EventLoopBaseClass' learns a new callback, 'can_be_deleted()' so as to mark 'MainLoop' as non-deletable. [1] For example: -object main-loop,id=main-loop,aio-max-batch=<value> Signed-off-by: Nicolas Saenz Julienne <nsaenzju@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: Markus Armbruster <armbru@redhat.com> Message-id: 20220425075723.20019-3-nsaenzju@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2022-05-09Introduce event-loop-base abstract classNicolas Saenz Julienne
Introduce the 'event-loop-base' abstract class, it'll hold the properties common to all event loops and provide the necessary hooks for their creation and maintenance. Then have iothread inherit from it. EventLoopBaseClass is defined as user creatable and provides a hook for its children to attach themselves to the user creatable class 'complete' function. It also provides an update_params() callback to propagate property changes onto its children. The new 'event-loop-base' class will live in the root directory. It is built on its own using the 'link_whole' option (there are no direct function dependencies between the class and its children, it all happens trough 'constructor' magic). And also imposes new compilation dependencies: qom <- event-loop-base <- blockdev (iothread.c) And in subsequent patches: qom <- event-loop-base <- qemuutil (util/main-loop.c) All this forced some amount of reordering in meson.build: - Moved qom build definition before qemuutil. Doing it the other way around (i.e. moving qemuutil after qom) isn't possible as a lot of core libraries that live in between the two depend on it. - Process the 'hw' subdir earlier, as it introduces files into the 'qom' source set. No functional changes intended. Signed-off-by: Nicolas Saenz Julienne <nsaenzju@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: Markus Armbruster <armbru@redhat.com> Message-id: 20220425075723.20019-2-nsaenzju@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2022-05-09Warn user if the vga flag is passed but no vga device is createdGautam Agrawal
A global boolean variable "vga_interface_created"(declared in softmmu/globals.c) has been used to track the creation of vga interface. If the vga flag is passed in the command line "default_vga"(declared in softmmu/vl.c) variable is set to 0. To warn user, the condition checks if vga_interface_created is false and default_vga is equal to 0. If "-vga none" is passed, this patch will not warn the user regarding the creation of VGA device. The warning "A -vga option was passed but this machine type does not use that option; no VGA device has been created" is logged if vga flag is passed but no vga device is created. This patch has been tested for x86_64, i386, sparc, sparc64 and arm boards. Signed-off-by: Gautam Agrawal <gautamnagrawal@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Resolves: https://gitlab.com/qemu-project/qemu/-/issues/581 Message-Id: <20220501122505.29202-1-gautamnagrawal@gmail.com> [thuth: Fix wrong warning with "-device" in some cases as reported by Paolo] Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-05-06sysemu: tpm: Add a stub function for TPM_IS_CRBEric Auger
In a subsequent patch, VFIO will need to recognize if a memory region owner is a TPM CRB device. Hence VFIO needs to use TPM_IS_CRB() even if CONFIG_TPM is unset. So let's add a stub function. Signed-off-by: Eric Auger <eric.auger@redhat.com> Suggested-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Stefan Berger <stefanb@linnux.ibm.com> Link: https://lore.kernel.org/r/20220506132510.1847942-2-eric.auger@redhat.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2022-05-03block: move fcntl_setfl()Marc-André Lureau
It is only used by block/file-posix.c, move it there. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2022-04-22dump: Add more offset variablesJanosch Frank
Offset calculations are easy enough to get wrong. Let's add a few variables to make moving around elf headers and data sections easier. Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220330123603.107120-6-frankja@linux.ibm.com>
2022-04-22dump: Introduce shdr_num to decrease complexityJanosch Frank
Let's move from a boolean to a int variable which will later enable us to store the number of sections that are in the dump file. Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20220330123603.107120-4-frankja@linux.ibm.com>
2022-04-22dump: Remove the sh_info variableJanosch Frank
There's no need to have phdr_num and sh_info at the same time. We can make phdr_num 32 bit and set PN_XNUM when we write the header if phdr_num >= PN_XNUM. Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20220407094824.5074-1-frankja@linux.ibm.com>
2022-04-20sysemu/os-win32: Test for and use _lock_file/_unlock_fileRichard Henderson
The bug referenced in os-win32.h was fixed in mingw-w64 v6. According to repology, version 5 used by ubuntu 18, which is not yet out of support, so provide a meson link test for it. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220417183019.755276-27-richard.henderson@linaro.org>
2022-04-06whpx: Added support for breakpoints and steppingIvan Shcherbakov
Below is the updated version of the patch adding debugging support to WHPX. It incorporates feedback from Alex Bennée and Peter Maydell regarding not changing the emulation logic depending on the gdb connection status. Instead of checking for an active gdb connection to determine whether QEMU should intercept the INT1 exceptions, it now checks whether any breakpoints have been set, or whether gdb has explicitly requested one or more CPUs to do single-stepping. Having none of these condition present now has the same effect as not using gdb at all. Message-Id: <0e7f01d82e9e$00e9c360$02bd4a20$@sysprogs.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-06Move fcntl_setfl() to oslib-posixMarc-André Lureau
It is only implemented for POSIX anyway. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220323155743.1585078-30-marcandre.lureau@redhat.com> [Add braces around if statements. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-06include: move os_*() to os-foo.hMarc-André Lureau
For consistency with other os_ functions that do not have POSIX implementation, declare an inline function for the stub in os-win32.h. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20220323155743.1585078-27-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-06include: move qemu_get_vm_name() to sysemu.hMarc-André Lureau
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20220323155743.1585078-26-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-06include: move dump_in_progress() to runstate.hMarc-André Lureau
Along with other state tracking functions. Rename it for consistency. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20220323155743.1585078-21-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-06oslib: drop qemu_gettimeofday()Marc-André Lureau
No longer used after the previous patches. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220307070401.171986-6-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-03-16softmmu: List CPU types againPhilippe Mathieu-Daudé
Commit e0220bb5b2 made cpus.c target-agnostic but didn't notice the cpu_list() function is only defined in target-specific code in "cpu.h". Move list_cpus() declaration to "exec/cpu-common.h" because this function is not softmmu-specific and can also be used by user-mode, along with moving its implementation to cpu.c, which is compiled per target. Fixes: e0220bb5b2 ("softmmu: Build target-agnostic objects once") Reported-by: Max Filippov <jcmvbkbc@gmail.com> Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20220314140108.26222-1-philippe.mathieu.daude@gmail.com> Tested-by: Max Filippov <jcmvbkbc@gmail.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-03-15kvm/msi: do explicit commit when adding msi routesLongpeng(Mike)
We invoke the kvm_irqchip_commit_routes() for each addition to MSI route table, which is not efficient if we are adding lots of routes in some cases. This patch lets callers invoke the kvm_irqchip_commit_routes(), so the callers can decide how to optimize. [1] https://lists.gnu.org/archive/html/qemu-devel/2021-11/msg00967.html Signed-off-by: Longpeng <longpeng2@huawei.com> Message-Id: <20220222141116.2091-3-longpeng2@huawei.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-03-15kvm-irqchip: introduce new API to support route changeLongpeng(Mike)
Paolo suggested adding the new API to support route changes [1]. We should invoke kvm_irqchip_begin_route_changes() before changing the routes, increasing the KVMRouteChange.changes if the routes are changed, and commit the changes at last. [1] https://lists.gnu.org/archive/html/qemu-devel/2021-11/msg02898.html Signed-off-by: Longpeng <longpeng2@huawei.com> Message-Id: <20220222141116.2091-2-longpeng2@huawei.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-03-06softmmu: Add qemu_init_arch_modules()Philippe Mathieu-Daudé
module_allow_arch() is the single target-specific call in the whole vl.c file. Move the module initialization out to arch_init.c, that way we'll be able to build vl.o once for all targets (the next commit). Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20220207075426.81934-21-f4bug@amsat.org>
2022-03-06accel: Introduce AccelOpsClass::cpus_are_resettable()Philippe Mathieu-Daudé
Add cpus_are_resettable() to AccelOps, and implement it for the KVM accelerator. Suggested-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20220207075426.81934-12-f4bug@amsat.org>
2022-03-06accel: Introduce AccelOpsClass::cpu_thread_is_idle()Philippe Mathieu-Daudé
Add cpu_thread_is_idle() to AccelOps, and implement it for the KVM / WHPX accelerators. Suggested-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20220207075426.81934-11-f4bug@amsat.org>
2022-03-06accel/hax: Introduce CONFIG_HAX_IS_POSSIBLEPhilippe Mathieu-Daudé
Mirror "sysemu/kvm.h" #ifdef'ry to define CONFIG_HAX_IS_POSSIBLE, expose hax_allowed to hax_enabled() macro. Suggested-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20220207075426.81934-9-f4bug@amsat.org>
2022-03-06sysemu/kvm: Make kvm_on_sigbus() / kvm_on_sigbus_vcpu() target agnosticPhilippe Mathieu-Daudé
kvm_on_sigbus() and kvm_on_sigbus_vcpu() prototypes don't have to be target specific. Remove this limitation to be able to build softmmu/cpus.c once for all targets. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20220207075426.81934-7-f4bug@amsat.org>
2022-03-06sysemu/memory_mapping: Become target-agnosticPhilippe Mathieu-Daudé
target_ulong is target-specific, while vaddr isn't. Remove the unnecessary "exec/cpu-defs.h" target-speficic header from "memory_mapping.h" and use the target-agnostic "hw/core/cpu.h" locally in memory_mapping.c. Remove "exec/memory.h" since MemoryRegion is forward-declared in "qemu/typedefs.h". Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20220207075426.81934-6-f4bug@amsat.org>
2022-03-04block-backend-common.h: split function pointers in BlockDevOpsEmanuele Giuseppe Esposito
Assertions in the callers of the function pointrs are already added by previous patches. Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20220303151616.325444-30-eesposit@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2022-03-04include/sysemu/blockdev.h: global state APIEmanuele Giuseppe Esposito
blockdev functions run always under the BQL lock. Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com> Message-Id: <20220303151616.325444-21-eesposit@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2022-03-04IO_CODE and IO_OR_GS_CODE for block-backend I/O APIEmanuele Giuseppe Esposito
Mark all I/O functions with IO_CODE, and all "I/O OR GS" with IO_OR_GS_CODE. Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com> Message-Id: <20220303151616.325444-10-eesposit@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2022-03-04include/sysemu/block-backend: split header into I/O and global state (GS) APIEmanuele Giuseppe Esposito
Similarly to the previous patches, split block-backend.h in block-backend-io.h and block-backend-global-state.h In addition, remove "block/block.h" include as it seems it is not necessary anymore, together with "qemu/iov.h" block-backend-common.h contains the structures shared between the two headers, and the functions that can't be categorized as I/O or global state. Assertions are added in the next patch. Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com> Message-Id: <20220303151616.325444-8-eesposit@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2022-03-04os-posix: Add os_set_daemonize()Hanna Reitz
The daemonizing functions in os-posix (os_daemonize() and os_setup_post()) only daemonize the process if the static `daemonize` variable is set. Right now, it can only be set by os_parse_cmd_args(). In order to use os_daemonize() and os_setup_post() from the storage daemon to have it be daemonized, we need some other way to set this `daemonize` variable, because I would rather not tap into the system emulator's arg-parsing code. Therefore, this patch adds an os_set_daemonize() function, which will return an error on os-win32 (because daemonizing is not supported there). Signed-off-by: Hanna Reitz <hreitz@redhat.com> Message-Id: <20220303164814.284974-2-hreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2022-03-04block: rename bdrv_invalidate_cache_all, blk_invalidate_cache and ↵Emanuele Giuseppe Esposito
test_sync_op_invalidate_cache Following the bdrv_activate renaming, change also the name of the respective callers. bdrv_invalidate_cache_all -> bdrv_activate_all blk_invalidate_cache -> blk_activate test_sync_op_invalidate_cache -> test_sync_op_activate No functional change intended. Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Hanna Reitz <hreitz@redhat.com> Message-Id: <20220209105452.1694545-5-eesposit@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2022-01-28rtc: Move RTC function prototypes to their own headerPeter Maydell
softmmu/rtc.c defines two public functions: qemu_get_timedate() and qemu_timedate_diff(). Currently we keep the prototypes for these in qemu-common.h, but most files don't need them. Move them to their own header, a new include/sysemu/rtc.h. Since the C files using these two functions did not need to include qemu-common.h for any other reason, we can remove those include lines when we add the include of the new rtc.h. The license for the .h file follows that of the softmmu/rtc.c where both the functions are defined. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-01-18hw/dma: Let dma_buf_read() / dma_buf_write() propagate MemTxResultPhilippe Mathieu-Daudé
Since commit 292e13142d2, dma_buf_rw() returns a MemTxResult type. Do not discard it, return it to the caller. Pass the previously returned value (the QEMUSGList residual size, which was rarely used) as an optional argument. With this new API, SCSIRequest::residual might now be accessed via a pointer. Since the size_t type does not have the same size on 32 and 64-bit host architectures, convert it to a uint64_t, which is big enough to hold the residual size, and the type is constant on both 32/64-bit hosts. Update the few dma_buf_read() / dma_buf_write() callers to the new API. Reviewed-by: Klaus Jensen <k.jensen@samsung.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Peter Xu <peterx@redhat.com> Message-Id: <20220117125130.131828-1-f4bug@amsat.org>
2022-01-18hw/dma: Use dma_addr_t type definition when relevantPhilippe Mathieu-Daudé
Update the obvious places where dma_addr_t should be used (instead of uint64_t, hwaddr, size_t, int32_t types). This allows to have &dma_addr_t type portable on 32/64-bit hosts. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20220111184309.28637-11-f4bug@amsat.org>
2022-01-18hw/dma: Move ScatterGatherEntry / QEMUSGList declarations aroundPhilippe Mathieu-Daudé
In the next commit we will use the dma_addr_t type in the QEMUSGList structure. Since currently dma_addr_t is defined after QEMUSGList, move the declarations to have dma_addr_t defined first. This is a pure code-movement patch. Suggested-by: David Hildenbrand <david@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: David Hildenbrand <david@redhat.com> Message-Id: <20220111184309.28637-10-f4bug@amsat.org>
2022-01-18hw/dma: Remove CONFIG_USER_ONLY checkPhilippe Mathieu-Daudé
DMA API should not be included in user-mode emulation. If so, build should fail. Remove the CONFIG_USER_ONLY check. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: David Hildenbrand <david@redhat.com> Message-Id: <20220111184309.28637-6-f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-01-14include/sysemu/blockdev.h: remove drive_get_max_devsEmanuele Giuseppe Esposito
Remove drive_get_max_devs, as it is not used by anyone. Last use was removed in commit 8f2d75e81d5 ("hw: Drop superfluous special checks for orphaned -drive"). Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20211215121140.456939-4-eesposit@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2022-01-14include/sysemu/blockdev.h: remove drive_mark_claimed_by_board and inline ↵Emanuele Giuseppe Esposito
drive_def drive_def is only a particular use case of qemu_opts_parse_noisily, so it can be inlined. Also remove drive_mark_claimed_by_board, as it is only defined but not implemented (nor used) anywhere. Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com> Message-Id: <20211215121140.456939-3-eesposit@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2022-01-04sysemu: Cleanup qemu_run_machine_init_done_notifiers()Xiaoyao Li
Remove qemu_run_machine_init_done_notifiers() since no implementation and user. Fixes: f66dc8737c9 ("vl: move all generic initialization out of vl.c") Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20220104024136.1433545-1-xiaoyao.li@intel.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-12-31dma: Let ld*_dma() propagate MemTxResultPhilippe Mathieu-Daudé
dma_memory_read() returns a MemTxResult type. Do not discard it, return it to the caller. Update the few callers. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20211223115554.3155328-19-philmd@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-01-11 16:32:37 +0000