aboutsummaryrefslogtreecommitdiff
path: root/include/qemu-common.h
AgeCommit message (Collapse)Author
2013-06-28cpu: Change qemu_init_vcpu() argument to CPUStateAndreas Färber
This allows to move the call into CPUState's realizefn. Therefore move the stub into libqemustub.a. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-06-28cpu: Guard cpu_{save,load}() definitionsAndreas Färber
A few targets already managed to implement cpu_save() and cpu_load() without defining CPU_SAVE_VERSION that causes them to be registered. Guard the prototypes with CPU_SAVE_VERSION to avoid this happening again until all targets are converted to VMState (or QIDL). Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-06-14create qemu_openpty_raw() helper function and move it to a separate fileMichael Tokarev
In two places qemu uses openpty() which is very system-dependent, and in both places the pty is switched to raw mode as well. Make a wrapper function which does both steps, and move all the system-dependent complexity into a separate file, together with static/local implementations of openpty() and cfmakeraw() from qemu-char.c. It is in a separate file, not part of oslib-posix.c, because openpty() often resides in -lutil which is not linked to every program qemu builds. This change removes #including of <pty.h>, <termios.h> and other rather specific system headers out of qemu-common.h, which isn't a place for such specific headers really. This version has been verified to build correctly on Linux, OpenBSD, FreeBSD and OpenIndiana. On the latter it lets qemu to be built with gtk gui which were not possible there due to missing openpty() and cfmakeraw(). Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Tested-by: Andreas Färber <andreas.faerber@web.de>
2013-06-06qemu-io: Move qemu_strsep() to cutils.cKevin Wolf
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-06-06cutils: Support 'P' and 'E' suffixes in strtosz()Kevin Wolf
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-05-22ui/gtk.c: Fix *BSD build of Gtk+ UIBrad Smith
Fix the build of the Gtk+ UI on *BSD systems. Signed-off-by: Brad Smith <brad@comstyle.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-id: 20130521161324.GA29977@rox.home.comstyle.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-05-20Rename hexdump to avoid FreeBSD libutil conflictEd Maste
On FreeBSD libutil is used for openpty(), but it also provides a hexdump() which conflicts with QEMU's. Signed-off-by: Ed Maste <emaste@freebsd.org> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1368718348-15199-1-git-send-email-emaste@freebsd.org Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-05-15qemu-common: Resolve vector build breakes for AltiVecPaolo Bonzini
On Mac OS X ppc, altivec.h defines "vector", leading to build breakage when used as variable name, e.g. in tracing code. Fix this by undefining identifiers after altivec.h inclusion. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Andreas Färber <andreas.faerber@web.de> Message-id: 1368632771-4328-1-git-send-email-andreas.faerber@web.de Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-05-14portability: pty.h is glibc-specificPaolo Bonzini
This should fix building the GTK+ front-end on BSDs. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1368533121-30796-1-git-send-email-pbonzini@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-29win32: add readv/writev emulationPaolo Bonzini
Commit e9d8fbf (qemu-file: do not use stdio for qemu_fdopen, 2013-03-27) introduced a usage of writev, which mingw32 does not have. Even though qemu_fdopen itself is not used on mingw32, the future-proof solution is to add an implementation of it. This is simple and similar to how we emulate sendmsg/recvmsg in util/iov.c. Some files include osdep.h without qemu-common.h, so move the definition of iovec to osdep.h too, and include osdep.h from qemu-common.h unconditionally (protection against including files when NEED_CPU_H is defined is not needed since the removal of AREG0). Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-24ccid-card-passthru, dev-smartcard-reader: add debug environment variablesAlon Levy
Introduces a new utility function: parse_debug_env to avoid code duplication. This overrides whatever debug value is set on the corresponding devices from the command line, and is meant to ease the usage with any management stack. For libvirt you can set environment variables by extending the dom namespace, i.e: <domain type='kvm' id='3' xmlns:qemu='http://libvirt.org/schemas/domain/qemu/1.0'> <qemu:commandline> <qemu:env name='QEMU_CCID_PASSTHRU_DEBUG' value='4'/> <qemu:env name='QEMU_CCID_DEBUG' value='4'/> </qemu:commandline> </domain> Signed-off-by: Alon Levy <alevy@redhat.com> Reviewed-by: Marc-André Lureau <mlureau@redhat.com>
2013-04-13unicode: New mod_utf8_codepoint()Markus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-03-26cutils: add a function to find non-zero content in a bufferPeter Lieven
this adds buffer_find_nonzero_offset() which is a SSE2/Altivec optimized function that searches for non-zero content in a buffer. the function starts full unrolling only after the first few chunks have been checked one by one. analyzing real memory page data has revealed that non-zero pages are non-zero within the first 256-512 bits in most cases. as this function is also heavily used to check for zero memory pages this tweak has been made to avoid the high setup costs of the fully unrolled check for non-zero pages. due to the optimizations used in the function there are restrictions on buffer address and search length. the function can_use_buffer_find_nonzero_content() can be used to check if the function can be used safely. Signed-off-by: Peter Lieven <pl@kamp.de> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-26move vector definitions to qemu-common.hPeter Lieven
vector optimizations will now be used at various places not just in is_dup_page() in arch_init.c Signed-off-by: Peter Lieven <pl@kamp.de> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-25glib: add a compatibility interface for g_timeout_add_secondsAnthony Liguori
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-03-15iov: Factor out hexdumperPeter Crosthwaite
Factor out the hexdumper functionality from iov for all to use. Useful for creating verbose debug printfery that dumps packet data. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: faaac219c55ea586d3f748befaf5a2788fd271b8.1361853677.git.peter.crosthwaite@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-02-26glib: Add compat wrapper for g_poll on old glibAlexander Graf
Older glib doesn't implement g_poll(). Most notably the glib version in use on SLE11 is on 2.18 which is hit by this. We do want to use g_poll() in the source however. So on older systems, just wrap it with functions that do exist on older versions. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de> Message-id: 1361835970-2889-1-git-send-email-agraf@suse.de Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-04cutils: unsigned int parsing functionsEduardo Habkost
There are lots of duplicate parsing code using strto*() in QEMU, and most of that code is broken in one way or another. Even the visitors code have duplicate integer parsing code[1]. This introduces functions to help parsing unsigned int values: parse_uint() and parse_uint_full(). Parsing functions for signed ints and floats will be submitted later. parse_uint_full() has all the checks made by opts_type_uint64() at opts-visitor.c: - Check for NULL (returns -EINVAL) - Check for negative numbers (returns -EINVAL) - Check for empty string (returns -EINVAL) - Check for overflow or other errno values set by strtoll() (returns -errno) - Check for end of string (reject invalid characters after number) (returns -EINVAL) parse_uint() does everything above except checking for the end of the string, so callers can continue parsing the remainder of string after the number. Unit tests included. [1] string-input-visitor.c:parse_int() could use the same parsing code used by opts-visitor.c:opts_type_int(), instead of duplicating that logic. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-01-25block: Add special error code for wrong formatStefan Weil
The block drivers need a special error code for "wrong format". From the available error codes EMEDIUMTYPE fits best. It is not available on all platforms, so a definition in qemu-common.h and a specific error report are needed. Signed-off-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-01-08qemu-common.h: Make qemu_init_vcpu() stub static inlineAndreas Färber
Turn the *-user macro into a no-op inline function to avoid unused-variable warnings and band-aiding #ifdef'ery. This allows to drop an #ifdef for alpha and avoids more for unicore32 and other upcoming trivial realizefn implementations. Suggested-by: Lluís Vilanova <vilanova@ac.upc.edu> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
2013-01-02iov: add qemu_iovec_concat_iov()Stefan Hajnoczi
The qemu_iovec_concat() function copies a subset of a QEMUIOVector. The new qemu_iovec_concat_iov() function does the same for a iov/cnt pair. It is easy to define qemu_iovec_concat() in terms of qemu_iovec_concat_iov(). The existing code is mostly unchanged, except for the assertion src->size >= soffset, which cannot be efficiently checked upfront on a iov/cnt pair. Instead we assert upon hitting the end of src with an unsatisfied soffset. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2012-12-19janitor: move remaining public headers to include/Paolo Bonzini
Headers in the root directory are now used only from within that directory. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-25 08:44:11 +0000