aboutsummaryrefslogtreecommitdiff
path: root/include/migration
AgeCommit message (Collapse)Author
2019-03-05migration: Add announce parametersDr. David Alan Gilbert
Add migration parameters that control RARP/GARP announcement timeouts. Based on earlier patches by myself and Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Acked-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2019-02-27migration: Add a VMSTATE_BOOL_TEST() macroCorey Minyard
This will be needed by coming I2C changes. Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2019-01-23vmstate: constify SaveVMHandlersMarc-André Lureau
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20181114133139.27346-1-marcandre.lureau@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2019-01-21migration: Add post_save function to VMStateDescriptionAaron Lindsay
In some cases it may be helpful to modify state before saving it for migration, and then modify the state back after it has been saved. The existing pre_save function provides half of this functionality. This patch adds a post_save function to provide the second half. Signed-off-by: Aaron Lindsay <aclindsa@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-id: 20181211151945.29137-2-aaron@os.amperecomputing.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-11-27vmstate: constify VMStateFieldMarc-André Lureau
Because they are supposed to remain const. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20181114132931.22624-1-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-19COLO: Remove colo_state migration structZhang Chen
We need to know if migration is going into COLO state for incoming side before start normal migration. Instead by using the VMStateDescription to send colo_state from source side to destination side, we use MIG_CMD_ENABLE_COLO to indicate whether COLO is enabled or not. Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Signed-off-by: Zhang Chen <zhangckid@gmail.com> Signed-off-by: Zhang Chen <chen.zhang@intel.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-10-19colo-compare: implement the process of checkpointZhang Chen
While do checkpoint, we need to flush all the unhandled packets, By using the filter notifier mechanism, we can easily to notify every compare object to do this process, which runs inside of compare threads as a coroutine. Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Signed-off-by: Zhang Chen <zhangckid@gmail.com> Signed-off-by: Zhang Chen <chen.zhang@intel.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-08-14vmstate.h: Provide VMSTATE_UINT16_SUB_ARRAYLuc Michel
Provide a VMSTATE_UINT16_SUB_ARRAY macro to save a uint16_t sub-array in a VMState. Signed-off-by: Luc Michel <luc.michel@greensocs.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180727095421.386-5-luc.michel@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-15typedefs: add QJSONGreg Kurz
Since commit 83ee768d6247b, we now have two places that define the QJSON type: $ git grep 'typedef struct QJSON QJSON' include/migration/vmstate.h:typedef struct QJSON QJSON; migration/qjson.h:typedef struct QJSON QJSON; This breaks docker-test-build@centos6: In file included from /tmp/qemu-test/src/migration/savevm.c:59: /tmp/qemu-test/src/migration/qjson.h:16: error: redefinition of typedef 'QJSON' /tmp/qemu-test/src/include/migration/vmstate.h:30: note: previous declaration of 'QJSON' was here make: *** [migration/savevm.o] Error 1 This happens because CentOS 6 has an old GCC 4.4.7. Even if redefining a typedef with the same type is permitted since GCC 4.6, unless -pedantic is passed, we don't really need to do that on purpose. Let's have a single definition in <qemu/typedefs.h> instead. Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <152844714981.11789.3657734445739553287.stgit@bahia.lan> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-06-04Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
acpi, vhost, misc: fixes, features vDPA support, fix to vhost blk RO bit handling, some include path cleanups, NFIT ACPI table. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Fri 01 Jun 2018 17:25:19 BST # gpg: using RSA key 281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: (31 commits) vhost-blk: turn on pre-defined RO feature bit ACPI testing: test NFIT platform capabilities nvdimm, acpi: support NFIT platform capabilities tests/.gitignore: add entry for generated file arch_init: sort architectures ui: use local path for local headers qga: use local path for local headers colo: use local path for local headers migration: use local path for local headers usb: use local path for local headers sd: fix up include vhost-scsi: drop an unused include ppc: use local path for local headers rocker: drop an unused include e1000e: use local path for local headers ioapic: fix up includes ide: use local path for local headers display: use local path for local headers trace: use local path for local headers migration: drop an unused include ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-01Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
* Linux header upgrade (Peter) * firmware.json definition (Laszlo) * IPMI migration fix (Corey) * QOM improvements (Alexey, Philippe, me) * Memory API cleanups (Jay, me, Tristan, Peter) * WHPX fixes and improvements (Lucian) * Chardev fixes (Marc-André) * IOMMU documentation improvements (Peter) * Coverity fixes (Peter, Philippe) * Include cleanup (Philippe) * -clock deprecation (Thomas) * Disable -sandbox unless CONFIG_SECCOMP (Yi Min Zhao) * Configurability improvements (me) # gpg: Signature made Fri 01 Jun 2018 17:42:13 BST # gpg: using RSA key BFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (56 commits) hw: make virtio devices configurable via default-configs/ hw: allow compiling out SCSI memory: Make operations using MemoryRegionIoeventfd struct pass by pointer. char: Remove unwanted crlf conversion qdev: Remove DeviceClass::init() and ::exit() qdev: Simplify the SysBusDeviceClass::init path hw/i2c: Use DeviceClass::realize instead of I2CSlaveClass::init hw/i2c/smbus: Use DeviceClass::realize instead of SMBusDeviceClass::init target/i386/kvm.c: Remove compatibility shim for KVM_HINTS_REALTIME Update Linux headers to 4.17-rc6 target/i386/kvm.c: Handle renaming of KVM_HINTS_DEDICATED scripts/update-linux-headers: Handle kernel license no longer being one file scripts/update-linux-headers: Handle __aligned_u64 virtio-gpu-3d: Define VIRTIO_GPU_CAPSET_VIRGL2 elsewhere gdbstub: Prevent fd leakage docs/interop: add "firmware.json" ipmi: Use proper struct reference for KCS vmstate vmstate: Add a VSTRUCT type tcg: remove softfloat from --disable-tcg builds qemu-options: Mark the non-functional -clock option as deprecated ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-01migration: drop an unused includeMichael S. Tsirkin
In the vmstate.h file, we just need a struct name. Use a forward declaration instead of an include, then adjust the one affected .c file to include the file that is no longer implicit from the header. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2018-06-01vmstate: Add a VSTRUCT typeCorey Minyard
The VMS_STRUCT has no way to specify which version of a structure to use. Add a type and a new field to allow the specific version of a structure to be used. Signed-off-by: Corey Minyard <cminyard@mvista.com> Message-Id: <1524670052-28373-2-git-send-email-minyard@acm.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-05-31vmstate.h: Provide VMSTATE_BOOL_SUB_ARRAYPeter Maydell
Provide a VMSTATE_BOOL_SUB_ARRAY to go with VMSTATE_UINT8_SUB_ARRAY and friends. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20180521140402.23318-23-peter.maydell@linaro.org
2018-05-15migration: introduce SaveVMHandlers.resume_preparePeter Xu
This is hook function to be called when a postcopy migration wants to resume from a failure. For each module, it should provide its own recovery logic before we switch to the postcopy-active state. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20180502104740.12123-16-peterx@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2018-03-13migration: add postcopy migration of dirty bitmapsVladimir Sementsov-Ogievskiy
Postcopy migration of dirty bitmaps. Only named dirty bitmaps are migrated. If destination qemu is already containing a dirty bitmap with the same name as a migrated bitmap (for the same node), then, if their granularities are the same the migration will be done, otherwise the error will be generated. If destination qemu doesn't contain such bitmap it will be created. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-id: 20180313180320.339796-12-vsementsov@virtuozzo.com [Changed '+' to '*' as per list discussion. --js] Signed-off-by: John Snow <jsnow@redhat.com>
2018-03-13migration: add is_active_iterate handlerVladimir Sementsov-Ogievskiy
Only-postcopy savevm states (dirty-bitmap) don't need live iteration, so to disable them and stop transporting empty sections there is a new savevm handler. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Message-id: 20180313180320.339796-10-vsementsov@virtuozzo.com
2018-03-13migration: introduce postcopy-only pendingVladimir Sementsov-Ogievskiy
There would be savevm states (dirty-bitmap) which can migrate only in postcopy stage. The corresponding pending is introduced here. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-id: 20180313180320.339796-6-vsementsov@virtuozzo.com
2018-03-02Include less of the generated modular QAPI headersMarkus Armbruster
In my "build everything" tree, a change to the types in qapi-schema.json triggers a recompile of about 4800 out of 5100 objects. The previous commit split up qmp-commands.h, qmp-event.h, qmp-visit.h, qapi-types.h. Each of these headers still includes all its shards. Reduce compile time by including just the shards we actually need. To illustrate the benefits: adding a type to qapi/migration.json now recompiles some 2300 instead of 4800 objects. The next commit will improve it further. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180211093607.27351-24-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> [eblake: rebase to master] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-02-13Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
virtio,vhost,pci,pc: features, fixes and cleanups - new stats in virtio balloon - virtio eventfd rework for boot speedup - vhost memory rework for boot speedup - fixes and cleanups all over the place Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Tue 13 Feb 2018 16:29:55 GMT # gpg: using RSA key 281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: (22 commits) virtio-balloon: include statistics of disk/file caches acpi-test: update FADT lpc: drop pcie host dependency tests: acpi: fix FADT not being compared to reference table hw/pci-bridge: fix pcie root port's IO hints capability libvhost-user: Support across-memory-boundary access libvhost-user: Fix resource leak virtio-balloon: unref the memory region before continuing pci: removed the is_express field since a uniform interface was inserted virtio-blk: enable multiple vectors when using multiple I/O queues pci/bus: let it has higher migration priority pci-bridge/i82801b11: clear bridge registers on platform reset vhost: Move log_dirty check vhost: Merge and delete unused callbacks vhost: Clean out old vhost_set_memory and friends vhost: Regenerate region list from changed sections list vhost: Merge sections added to temporary list vhost: Simplify ring verification checks vhost: Build temporary section list and deref after commit virtio: improve virtio devices initialization time ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-09Include qapi/qmp/qdict.h exactly where neededMarkus Armbruster
This cleanup makes the number of objects depending on qapi/qmp/qdict.h drop from 4550 (out of 4743) to 368 in my "build everything" tree. For qapi/qmp/qobject.h, the number drops from 4552 to 390. While there, separate #include from file comment with a blank line. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-13-armbru@redhat.com>
2018-02-09Drop superfluous includes of qapi-types.h and test-qapi-types.hMarkus Armbruster
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-4-armbru@redhat.com>
2018-02-08pci/bus: let it has higher migration priorityPeter Xu
In the past, we prioritized IOMMU migration so that we have such a priority order: IOMMU > PCI Devices When migrating a guest with both vIOMMU and a pcie-root-port, we'll always migrate vIOMMU first, since pci buses will be seen to have the same priority of general PCI devices. That's problematic. The thing is that PCI bus number information is stored in the root port, and that is needed by vIOMMU during post_load(), e.g., to figure out context entry for a device. If we don't have correct bus numbers for devices, we won't be able to recover device state of the DMAR memory regions, and things will be messed up. So let's boost the PCIe root ports to be even with higher priority: PCIe Root Port > IOMMU > PCI Devices A smoke test shows that this patch fixes bug 1538953. Also, apply this rule to all the PCI bus/bridge devices: ioh3420, xio3130_downstream, xio3130_upstream, pcie_pci_bridge, pci-pci bridge, i82801b11. I noted that we set pcie_pci_bridge_dev_vmstate twice. Clean that up together. CC: Alex Williamson <alex.williamson@redhat.com> CC: Marcel Apfelbaum <marcel@redhat.com> CC: Michael S. Tsirkin <mst@redhat.com> CC: Dr. David Alan Gilbert <dgilbert@redhat.com> CC: Juan Quintela <quintela@redhat.com> CC: Laurent Vivier <lvivier@redhat.com> Bug: https://bugzilla.redhat.com/show_bug.cgi?id=1538953 Reported-by: Maxime Coquelin <maxime.coquelin@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-01-25vmstate: Add VMSTATE_UINT64_SUB_ARRAYRichard Henderson
At the same time, move VMSTATE_UINT32_SUB_ARRAY beside the other UINT32 definitions. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180119045438.28582-8-richard.henderson@linaro.org Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-15migration: finalize current_migration objectVladimir Sementsov-Ogievskiy
current_migration has .instance_finalize callback, but it is not called, because nobody unrefs current_migration. Fix that. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-09-27migration: check pre_save return in vmstate_save_stateDr. David Alan Gilbert
Check the return value of pre_save state and fail vmstate_save_state if the pre_save failed. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20170925112917.21340-3-dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-09-27migration: pre_save return intDr. David Alan Gilbert
Modify the pre_save method on VMStateDescription to return an int rather than void so that it potentially can fail. Changed zillions of devices to make them return 0; the only case I've made it return non-0 is hw/intc/s390_flic_kvm.c that already had an error_report/return case. Note: If you add an error exit in your pre_save you must emit an error_report to say why. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20170925112917.21340-2-dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-09-22migration: add has_postcopy savevm handlerVladimir Sementsov-Ogievskiy
Now postcopy-able states are recognized by not NULL save_live_complete_postcopy handler. But when we have several different postcopy-able states, it is not convenient. Ram postcopy may be disabled, while some other postcopy enabled, in this case Ram state should behave as it is not postcopy-able. This patch add separate has_postcopy handler to specify behaviour of savevm state. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-07-18migration: remove check against colo supportPeter Xu
Since commit a15215f3 ("build: remove --enable-colo/--disable-colo"), colo is always supported. We don't need any colo_supported() now since it is always true. Removing any extra code that depends on it. CC: Paolo Bonzini <pbonzini@redhat.com> CC: Hailiang Zhang <zhang.zhanghailiang@huawei.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Zhang Chen<zhangchen.fnst@cn.fujitsu.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <1500349150-13240-8-git-send-email-peterx@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-07-10migration: Create load_setup()/cleanup() methodsJuan Quintela
We need to do things at load time and at cleanup time. Signed-off-by: Juan Quintela <quintela@redhat.com> -- Move the printing of the error message so we can print the device giving the error. Add call to postcopy stuff Message-Id: <20170628095228.4661-4-quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-07-10migration: Rename cleanup() to save_cleanup()Juan Quintela
We need a cleanup for loads, so we rename here to be consistent. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> -- Rename htab_cleanup to htap_save_cleanup as dave suggestion Message-Id: <20170628095228.4661-3-quintela@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-07-10migration: Rename save_live_setup() to save_setup()Juan Quintela
We are going to use it now for more than save live regions. Once there rename qemu_savevm_state_begin() to qemu_savevm_state_setup(). Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20170628095228.4661-2-quintela@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-07-10migration: fix handling for --only-migratablePeter Xu
MigrateState object is not ready at that time, so we'll get an assertion. Use qemu_global_option() instead. Reported-by: Eduardo Habkost <ehabkost@redhat.com> Suggested-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Fixes: 3df663e ("migration: move only_migratable to MigrationState") Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <1499242883-2184-2-git-send-email-peterx@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-06-28vmstate: error hint for failed equal checksHalil Pasic
In some cases a failing VMSTATE_*_EQUAL does not mean we detected a bug, but it's actually the best we can do. Especially in these cases a verbose error message is required. Let's introduce infrastructure for specifying a error hint to be used if equal check fails. Let's do this by adding a parameter to the _EQUAL macros called _err_hint. Also change all current users to pass NULL as last parameter so nothing changes for them. Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com> Message-Id: <20170623144823.42936-1-pasic@linux.vnet.ibm.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-06-28migration: hmp: dump globalsPeter Xu
Now we have some globals that can be configured for migration. Dump them in HMP info migration for better debugging. (we can also use this to monitor whether COMPAT fields are applied correctly on compatible machines) Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <1498536619-14548-11-git-send-email-peterx@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-06-28migration: move skip_section_footersPeter Xu
Move it into MigrationState, revert its meaning and renaming it to send_section_footer, with a property bound to it. Same trick is played like previous patches. Removing savevm_skip_section_footers(). Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <1498536619-14548-9-git-send-email-peterx@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-06-28migration: move skip_configuration outPeter Xu
It was in SaveState but now moved to MigrationState altogether, reverted its meaning, then renamed to "send_configuration". Again, using HW_COMPAT_2_3 for old PC/SPAPR machines, and accel_register_prop() for xen_init(). Removing savevm_skip_configuration(). Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <1498536619-14548-8-git-send-email-peterx@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-06-28migration: move only_migratable to MigrationStatePeter Xu
One less global variable, and it does only matter with migration. We keep the old "--only-migratable" option, but also now we support: -global migration.only-migratable=true Currently still keep the old interface. Hmm, now vl.c has no way to access migrate_get_current(). Export a function for it to setup only_migratable. Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <1498536619-14548-7-git-send-email-peterx@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-06-28migration: move global_state.optional outPeter Xu
Put it into MigrationState then we can use the properties to specify whether to enable storing global state. Removing global_state_set_optional() since now we can use HW_COMPAT_2_3 for x86/power, and AccelClass.global_props for Xen. Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <1498536619-14548-6-git-send-email-peterx@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-06-28migration: let MigrationState be a qdevPeter Xu
Let the old man "MigrationState" join the object family. Direct benefit is that we can start to use all the property features derived from current QDev, like: HW_COMPAT_* bits, command line setup for migration parameters (so will never need to set them up each time using HMP/QMP, this is really, really attractive for test writters), etc. I see no reason to disallow this happen yet. So let's start from this one, to see whether it would be anything good. Now we init the MigrationState struct statically in main() to make sure it's initialized after global properties are applied, since we'll use them during creation of the object. No functional change at all. Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <1498536619-14548-5-git-send-email-peterx@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-06-14migration: Remove unneeded includesJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com>
2017-06-14migration: Fix compilation with older compilersJuan Quintela
That typedefs are needed on both files. New compilers (F25 where I work) don't complain about repeating a typedef. But older ones complain. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Greg Kurz <groug@kaod.org>
2017-06-13hw/intc/arm_gicv3_its: Allow save/restoreEric Auger
We change the restoration priority of both the GICv3 and ITS. The GICv3 must be restored before the ITS and the ITS needs to be restored before PCIe devices since it translates their MSI transactions. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-id: 1497023553-18411-5-git-send-email-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-06-13migration: Move migration.h to migration/Juan Quintela
Nothing uses it outside of migration.h Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Laurent Vivier <lvivier@redhat.com>
2017-06-13migration: Move remaining exported functions to migration/misc.hJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Peter Xu <peterx@redhat.com>
2017-06-13migration: create global_state.cJuan Quintela
It don't belong anywhere else, just the global state where everybody can stick other things. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Laurent Vivier <lvivier@redhat.com>
2017-06-13migration: ram_control_* are implemented in qemu_fileJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Laurent Vivier <lvivier@redhat.com>
2017-06-13migration: Commands are only used inside migration.cJuan Quintela
So, move them there. Notice that we export functions that send commands, not the command themselves. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Laurent Vivier <lvivier@redhat.com>
2017-06-13migration: Move constants to savevm.hJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Laurent Vivier <lvivier@redhat.com>
2017-06-13migration: Move dump_vmsate_json_to_file() to misc.hJuan Quintela
It was not from vmstate.c to start with. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Laurent Vivier <lvivier@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-22 19:03:50 +0000