aboutsummaryrefslogtreecommitdiff
path: root/include/migration
AgeCommit message (Collapse)Author
2015-06-12Add a protective section footerDr. David Alan Gilbert
Badly formatted migration streams can go undetected or produce misleading errors due to a lock of checking at the end of sections. In particular a section that adds an extra 0x00 at the end causes what looks like a normal end of stream and thus doesn't produce any errors, and something that ends in a 0x01..0x04 kind of look like real section headers and then fail when the section parser tries to figure out which section they are. This is made worse by the choice of 0x00..0x04 being small numbers that are particularly common in normal section data. This patch adds a section footer consisting of a marker (0x7e - ~) followed by the section-id that was also sent in the header. If they mismatch then it throws an error explaining which section was being loaded. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-06-12Disable section footers on older machine typesDr. David Alan Gilbert
The next patch adds section footers; but we don't want to break migration compatibility so disable them on older machine types Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-06-12Move loadvm_handlers into MigrationIncomingStateDr. David Alan Gilbert
In postcopy we need the loadvm_handlers to be used in a couple of different instances of the loadvm loop/routine, and thus it can't be local any more. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-06-12Move copy out of qemu_peek_bufferDr. David Alan Gilbert
qemu_peek_buffer currently copies the data it reads into a buffer, however a future patch wants access to the buffer without the copy, hence rework to remove the copy to the layer above. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-06-12Create MigrationIncomingStateDr. David Alan Gilbert
There are currently lots of pieces of incoming migration state scattered around, and postcopy is adding more, and it seems better to try and keep it together. allocate MIS in process_incoming_migration_co Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-06-12Add qemu_get_counted_string to read a string prefixed by a count byteDr. David Alan Gilbert
and use it in loadvm_state and ram_load. Where ever it's used, check the return and error if it failed. Minor: ram_load was using a 257 byte array for its string, the maximum length is 255 bytes + 0 terminator, so fix to 256 Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-06-12migration: Use normal VMStateDescriptions for SubsectionsJuan Quintela
We create optional sections with this patch. But we already have optional subsections. Instead of having two mechanism that do the same, we can just generalize it. For subsections we just change: - Add a needed function to VMStateDescription - Remove VMStateSubsection (after removal of the needed function it is just a VMStateDescription) - Adjust the whole tree, moving the needed function to the corresponding VMStateDescription Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-06-12migration: move ram stuff to migration/ramJuan Quintela
For historic reasons, ram migration have been on arch_init.c. Just split it into migration/ram.c, the same that happened with block.c. There is only code movement, no changes altogether. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2015-05-07migration: Use an array instead of 3 parametersLiang Li
Put the three parameters related to multiple thread (de)compression into an int array, and use an enum type to index the parameter. Signed-off-by: Liang Li <liang.z.li@intel.com> Signed-off-by: Yang Zhang <yang.z.zhang@intel.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-05-06qemu-file: Add compression functions to QEMUFileLiang Li
qemu_put_compression_data() compress the data and put it to QEMUFile. qemu_put_qemu_file() put the data in the buffer of source QEMUFile to destination QEMUFile. Signed-off-by: Liang Li <liang.z.li@intel.com> Signed-off-by: Yang Zhang <yang.z.zhang@intel.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-05-06migration: Add the framework of multi-thread decompressionLiang Li
Add the code to create and destroy the multiple threads those will be used to do data decompression. Left some functions empty just to keep clearness, and the code will be added later. Signed-off-by: Liang Li <liang.z.li@intel.com> Signed-off-by: Yang Zhang <yang.z.zhang@intel.com> Reviewed-by: Dr.David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-05-06migration: Add the framework of multi-thread compressionLiang Li
Add the code to create and destroy the multiple threads those will be used to do data compression. Left some functions empty to keep clearness, and the code will be added later. Signed-off-by: Liang Li <liang.z.li@intel.com> Signed-off-by: Yang Zhang <yang.z.zhang@intel.com> Reviewed-by: Dr.David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-03-17migration: Remove unused functionsThomas Huth
migrate_rdma_pin_all() and qsb_clone() are completely unused and thus can be deleted. Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com> Cc: Juan Quintela <quintela@redhat.com> Cc: Amit Shah <amit.shah@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-03-16ram: make all save_page functions take a uint64_t parameterJuan Quintela
It used to be an int, but then we can't pass directly the bytes_transferred parameter, that would happen later in the series. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com>
2015-03-09Add more VMSTATE_*_TEST variants for integersDavid Gibson
Currently, vmstate.h includes helper macro variants for 8, 16 and 32-bit unsigned integers which include a "test" function which can selectively enable or disable the field's presence in the migration stream. There aren't similar helpers for 64-bit unsigned integers, or any size of signed integers. This patch remedies this. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2015-02-18hmp: Clean up declarations for long-gone info handlersMarkus Armbruster
Leftovers from d1f2964 qapi: Convert query-spice 791e7c8 qapi: Convert query-migrate 0fe6a7f slirp: Drop statistic code Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-02-10migration: Fix warning caused by missing declaration of vmstate_dummyStefan Weil
Warning from the Sparse static analysis tool: stubs/vmstate.c:4:26: warning: symbol 'vmstate_dummy' was not declared. Should it be static? Cc: Juan Quintela <quintela@redhat.com> Cc: Amit Shah <amit.shah@redhat.com> Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-02-05migration: Append JSON description of migration streamAlexander Graf
One of the annoyances of the current migration format is the fact that it's not self-describing. In fact, it's not properly describing at all. Some code randomly scattered throughout QEMU elaborates roughly how to read and write a stream of bytes. We discussed an idea during KVM Forum 2013 to add a JSON description of the migration protocol itself to the migration stream. This patch adds a section after the VM_END migration end marker that contains description data on what the device sections of the stream are composed of. This approach is backwards compatible with any QEMU version reading the stream, because QEMU just stops reading after the VM_END marker and ignores any data following it. With an additional external program this allows us to decipher the contents of any migration stream and hopefully make migration bugs easier to track down. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-02-05qemu-file: Add fast ftell code pathAlexander Graf
For ftell we flush the output buffer to ensure that we don't have anything lingering in our internal buffers. This is a very safe thing to do. However, with the dynamic size measurement that the dynamic vmstate description will bring this would turn out quite slow. Instead, we can fast path this specific measurement and just take the internal buffers into account when telling the kernel our position. I'm sure I overlooked some corner cases where this doesn't work, so instead of tuning the safe, existing version, this patch adds a fast variant of ftell that gets used by the dynamic vmstate description code which isn't critical when it fails. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-01-26vmstate: accept QEMUTimer in VMSTATE_TIMER*, add VMSTATE_TIMER_PTR*Paolo Bonzini
Old users of VMSTATE_TIMER* are mechanically changed to VMSTATE_TIMER_PTR variants. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-01-26target-i386: use vmstate_offset_sub_array for AVX registersPaolo Bonzini
After the next patch, each vmstate field will extract parts of a larger (32x512-bit) array, so we cannot check the vmstate field against the type of the array. While changing this, change the macros to accept the index of the first element (which will not be 0 for Hi16_ZMM_REGS) instead of the number of elements (which is always CPU_NB_REGS). Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-01-16vmstate: type-check sub-arraysPaolo Bonzini
While we cannot check against the type of the full array, we can check against the type of the fields. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2015-01-16socket shutdownDr. David Alan Gilbert
Add QEMUFile interface to allow a socket to be 'shut down' - i.e. any reads/writes will fail (and any blocking read/write will be woken). Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2015-01-15xbzrle: optimize XBZRLE to decrease the cache missesChenLiang
Avoid hot pages being replaced by others to remarkably decrease cache misses Sample results with the test program which quote from xbzrle.txt ran in vm:(migrate bandwidth:1GE and xbzrle cache size 8MB) the test program: include <stdlib.h> include <stdio.h> int main() { char *buf = (char *) calloc(4096, 4096); while (1) { int i; for (i = 0; i < 4096 * 4; i++) { buf[i * 4096 / 4]++; } printf("."); } } before this patch: virsh qemu-monitor-command test_vm '{"execute": "query-migrate"}' {"return":{"expected-downtime":1020,"xbzrle-cache":{"bytes":1108284, "cache-size":8388608,"cache-miss-rate":0.987013,"pages":18297,"overflow":8, "cache-miss":1228737},"status":"active","setup-time":10,"total-time":52398, "ram":{"total":12466991104,"remaining":1695744,"mbps":935.559472, "transferred":5780760580,"dirty-sync-counter":271,"duplicate":2878530, "dirty-pages-rate":29130,"skipped":0,"normal-bytes":5748592640, "normal":1403465}},"id":"libvirt-706"} 18k pages sent compressed in 52 seconds. cache-miss-rate is 98.7%, totally miss. after optimizing: virsh qemu-monitor-command test_vm '{"execute": "query-migrate"}' {"return":{"expected-downtime":2054,"xbzrle-cache":{"bytes":5066763, "cache-size":8388608,"cache-miss-rate":0.485924,"pages":194823,"overflow":0, "cache-miss":210653},"status":"active","setup-time":11,"total-time":18729, "ram":{"total":12466991104,"remaining":3895296,"mbps":937.663549, "transferred":1615042219,"dirty-sync-counter":98,"duplicate":2869840, "dirty-pages-rate":58781,"skipped":0,"normal-bytes":1588404224, "normal":387794}},"id":"libvirt-266"} 194k pages sent compressed in 18 seconds. The value of cache-miss-rate decrease to 48.59%. Signed-off-by: ChenLiang <chenliang88@huawei.com> Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2014-10-14qemu-file: Make qemu_file_is_writable() non-staticEduardo Habkost
The QEMUFileStdio code will use qemu_file_is_writable() and will be moved to a separate file. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2014-10-14vmstate: Allow dynamic allocation for VBUFFER during migrationAlexey Kardashevskiy
This extends use of VMS_ALLOC flag from arrays to VBUFFER as well. This defines VMSTATE_VBUFFER_ALLOC_UINT32 which makes use of VMS_ALLOC and uses uint32_t type for a size. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Juan Quintela <quintela@redhat.com>
2014-10-14QEMUSizedBuffer based QEMUFileDr. David Alan Gilbert
This is based on Stefan and Joel's patch that creates a QEMUFile that goes to a memory buffer; from: http://lists.gnu.org/archive/html/qemu-devel/2013-03/msg05036.html Using the QEMUFile interface, this patch adds support functions for operating on in-memory sized buffers that can be written to or read from. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Joel Schopp <jschopp@linux.vnet.ibm.com> For fixes/tweeks I've done: Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2014-06-27vmstate: Add preallocation for migrating arrays (VMS_ALLOC flag)Alexey Kardashevskiy
There are few helpers already to support array migration. However they all require the destination side to preallocate arrays before migration which is not always possible due to unknown array size as it might be some sort of dynamic state. One of the examples is an array of MSIX-enabled devices in SPAPR PHB - this array may vary from 0 to 65536 entries and its size depends on guest's ability to enable MSIX or do PCI hotplug. This adds new VMSTATE_VARRAY_STRUCT_ALLOC macro which is pretty similar to VMSTATE_STRUCT_VARRAY_POINTER_INT32 but it can alloc memory for migratign array on the destination side. This defines VMS_ALLOC flag for a field. This changes vmstate_base_addr() to do the allocation when receiving migration. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Juan Quintela <quintela@redhat.com> [agraf: drop g_malloc_n usage] Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-23migration: dump vmstate info as a json file for static analysisAmit Shah
This commit adds a new command, '-dump-vmstate', that takes a filename as an argument. When executed, QEMU will dump the vmstate information for the machine type it's invoked with to the file, and quit. The JSON-format output can then be used to compare the vmstate info for different QEMU versions, specifically to test whether live migration would break due to changes in the vmstate data. A Python script that compares the output of such JSON dumps is included in the following commit. Signed-off-by: Amit Shah <amit.shah@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2014-06-19migration: introduce self_announce_delay()Jason Wang
This patch introduces self_announce_delay() to calculate the delay for the next announce round. This could be used by other device e.g virtio-net who wants to do announcing by itself. Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19migration: export SELF_ANNOUNCE_ROUNDSJason Wang
Export it for other users. Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-05-05migration: expose xbzrle cache miss rateChenLiang
expose xbzrle cache miss rate Signed-off-by: ChenLiang <chenliang88@huawei.com> Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2014-05-05migration: expose the bitmap_sync_count to the endChenLiang
expose the count that logs the times of updating the dirty bitmap to end user. Signed-off-by: ChenLiang <chenliang88@huawei.com> Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2014-05-05Provide init function for ram migrationDr. David Alan Gilbert
Provide ram_mig_init (like blk_mig_init) for vl.c to initialise stuff to do with ram migration (currently in arch_init.c). Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2014-05-05Make qemu_peek_buffer loop until it gets it's dataDr. David Alan Gilbert
Make qemu_peek_buffer repeatedly call fill_buffer until it gets all the data it requires, or until there is an error. At the moment, qemu_peek_buffer will try one qemu_fill_buffer if there isn't enough data waiting, however the kernel is entitled to return just a few bytes, and still leave qemu_peek_buffer with less bytes than it needed. I've seen this fail in a dev world, and I think it could theoretically fail in the peeking of the subsection headers in the current world. Comment qemu_peek_byte to point out it's not guaranteed to work for non-continuous peeks Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: ChenLiang <chenliang0016@icloud.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2014-05-05vmstate: s/VMSTATE_INT32_LE/VMSTATE_INT32_POSITIVE_LE/Michael S. Tsirkin
As the macro verifies the value is positive, rename it to make the function clearer. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2014-05-05vmstate: add VMSTATE_VALIDATEMichael S. Tsirkin
Validate state using VMS_ARRAY with num = 0 and VMS_MUST_EXIST Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2014-05-05vmstate: add VMS_MUST_EXISTMichael S. Tsirkin
Can be used to verify a required field exists or validate state in some other way. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2014-03-14scsi: Fix migration of scsi sense dataFam Zheng
c5f52875 changed the size of sense array in vmstate_scsi_device by mistake. This patch restores the old size, and add a subsection for the remaining part of the buffer size. So that migration is not broken. Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-02-25Fix two XBZRLE corruption issuesDr. David Alan Gilbert
Push zero'd pages into the XBZRLE cache A page that was cached by XBZRLE, zero'd and then XBZRLE'd again was being compared against a stale cache value Don't use 'qemu_put_buffer_async' to put pages from the XBZRLE cache Since the cache might change before the data hits the wire Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2014-02-08vmstate: Add uint32 2D-array supportChristoffer Dall
Add support for saving VMState of 2D arrays of uint32 values. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-04Don't abort on memory allocation errorOrit Wasserman
It is better to fail migration in case of failure to allocate new cache item Signed-off-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2014-02-04migration:fix free XBZRLE decoded_buf wrongGonglei (Arei)
When qemu do live migration with xbzrle, qemu malloc decoded_buf at destination end but free it at source end. It will crash qemu by double free error in some scenarios. Splitting the XBZRLE structure for clear logic distinguishing src/dst side. Signed-off-by: ChenLiang <chenliang88@huawei.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Orit Wasserman <owasserm@redhat.com> Signed-off-by: GongLei <arei.gonglei@huawei.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2014-02-04vmstate: Make VMSTATE_STRUCT_POINTER take type, not ptr-to-typePeter Maydell
The VMSTATE_STRUCT_POINTER macros are a bit odd in that they must be passed an argument "FooType *" rather than just taking the FooType. They're only used in one place, so it's easy to tidy this up. This also lets us use the macro to replace the hand-rolled VMSTATE_PTIMER. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Juan Quintela <quintela@redhat.com>
2014-01-13migration: Move QEMU_VM_* defines to migration/migration.hEduardo Habkost
The VMState code will be moved to vmstate.c and it uses some of the QEMU_VM_* constants, so move it to a header. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Orit Wasserman <owasserm@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2014-01-13qemu-file: Make a few functions non-staticEduardo Habkost
The QEMUFile code will be moved to qemu-file.c. This will require making the following functions non-static because they are used by the savevm.c code: * qemu_peek_byte() * qemu_peek_buffer() * qemu_file_skip() * qemu_file_set_error() Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Orit Wasserman <owasserm@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-12-17vmstate: Add support for an array of ptimer_state *Peter Maydell
Add support for defining a vmstate field which is an array of pointers to structures, and use this to define a VMSTATE_PTIMER_ARRAY() which allows an array of ptimer_state* to be used by devices. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1387159292-10436-2-git-send-email-lig.fnst@cn.fujitsu.com
2013-09-24migration: add version supporting macros for struct pointerAlexey Kardashevskiy
This adds version supporting macros VMSTATE_STRUCT_POINTER_TEST_V and VMSTATE_STRUCT_POINTER_V in addition to the already existing VMSTATE_STRUCT_POINTER and VMSTATE_STRUCT_POINTER_TEST macros. Cc: Andreas Färber <afaerber@suse.de> Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-07-29migration: fix spice migrationStefan Hajnoczi
Commit 29ae8a4133082e16970c9d4be09f4b6a15034617 ("rdma: introduce MIG_STATE_NONE and change MIG_STATE_SETUP state transition") changed the state transitions during migration setup. Spice used to be notified with MIG_STATE_ACTIVE and it detected this using migration_is_active(). Spice is now notified with MIG_STATE_SETUP and migration_is_active() no longer works. Replace migration_is_active() with migration_in_setup() to fix spice migration. Cc: Michael R. Hines <mrhines@us.ibm.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-07-23rdma: account for the time spent in MIG_STATE_SETUP through QMPMichael R. Hines
Using the previous patches, we're now able to timestamp the SETUP state. Once we have this time, let the user know about it in the schema. Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael R. Hines <mrhines@us.ibm.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-28 01:17:40 +0000