| Age | Commit message (Collapse) | Author |
|---|
|
The 'info pic' HMP command dumps the state of the interrupt controller.
Add the dump of the NVG and NVC tables to its output to ease debug.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
|
|
The 'PGoFirst' field of a Notify Virtual Processor tells if the NVP
belongs to a VP group.
Also, print the Reporting Cache Line address, if defined.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
|
|
Adds support for single byte writes to offset 0xC18 of the TIMA address
space. When this offset is written to, the hardware disables the OS
context and copies the current state information to the odd cache line
of the pair specified by the NVT structure indexed by the OS CAM entry.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Kowal <kowal@linux.vnet.ibm.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
|
|
The OGEN field at offset 0x1F is a new field for Gen2 TIMA. This
patch defines it.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Kowal <kowal@linux.vnet.ibm.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
|
|
Making some pre-requisite alignment changes ahead of the following patch
sets. Making these changes now will ease the review of the patch sets.
Checkpatch wants the closing comment '*/' on a separate line, unless it is
on the same line as the starting comment '/*'.
There are also changes to prevent lines from spanning 80 columns.
Changed block of defines from:
#define A 1 /* original define comment is not
* preferred, but not flagged... */
#define B 2 /* Newly added define comment
* is flagged with a warning */
To:
#define A 1 /* original define comment is */
/* now fine, no warning... */
#define B 2 /* Newly added define comment */
/* is fine... */
Signed-off-by: Michael Kowal <kowal@linux.vnet.ibm.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
|
|
The length of this region can be > 32-bits, which overflows size_t on
32-bit hosts. Change to uint64_t.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
|
|
The Power11 architected and raw mode support in Linux was merged via [1]
and the corresponding support in QEMU is waiting to be added by [2]
which in V6 currently.
Add the Power11 capabilities and the required handling in TCG L0
implementation of the "Nested PAPR API".
Note: This patch is based on [2].
[1] https://lore.kernel.org/all/20240221044623.1598642-1-mpe@ellerman.id.au/
[2] https://lore.kernel.org/all/20240731055022.696051-1-adityag@linux.ibm.com/
Signed-off-by: Amit Machhiwal <amachhiw@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
|
|
The DPDES support for doorbell emulation and handling for KVM on PAPR
guests was added in Linux via [1]. Subsequently, a new GSB (Guest State
Buffer) element for DPDES was added in Linux; the same has been missing
in TCG L0 implementation. Add support for DPDES register's APIv2 GSB
element and required handling in `spapr_nested.c`.
Currently, booting a KVM guest inside a QEMU TCG guest fails with the
following crash. The crash occurs while handling the GUEST_RUN_VCPU
hcall made in TCG L0. In the hcall handling path, map_and_getset_state()
calls getset_state(), which, in turn, calls guest_state_request_check()
to validate the GSR (Guest State Request) elements. During this process,
guest_state_request_check() iterates over the GSR elements and receives
a NULL return code from guest_state_element_type_find() for the type
variable corresponding to the DPDES register's elemetn ID (which was
unknown to TCG L0). Subsequently, getset_state() returns H_P3,
ultimately leading to the hcall failure and causing the KVM guest to
crash.
KVM: unknown exit, hardware reason ffffffffffffffea
[ ... KVM register dump ... ]
Fix this by adding the required support in TCG L0 implementation of
APIv2.
[1] https://lore.kernel.org/all/20240605113913.83715-1-gautam@linux.ibm.com/
Fixes: 4a575f9a0567 ("spapr: nested: Initialize the GSB elements lookup table.")
Suggested-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Amit Machhiwal <amachhiw@linux.ibm.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
|
|
Commit 0cac0f1b964 marked pseries-2.12 machines as deprecated
with reasons mentioned in its commit log.
Removing pseries-2.12 specific code with this patch.
While at it, also remove pre-3.0-migration hacks introduced for backward
compatibility which are now turned useless.
Suggested-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
|
|
Commit 1392617d3576 intended to tag pseries-2.1 - 2.11 machines as
deprecated with reasons mentioned in its commit log.
Removing pseries-2.9 specific code with this patch for now.
While at it, also remove the pre-2.10 migration hacks which now become
obsolete.
Suggested-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
|
|
Commit 1392617d3576 intended to tag pseries-2.1 - 2.11 machines as
deprecated with reasons mentioned in its commit log.
Removing pseries-2.7 specific code with this patch for now.
While at it, also remove pre-2.8-migration and pci/mmio hacks introduced
for backward compatibility.
Suggested-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
|
|
Commit 1392617d3576 intended to tag pseries-2.1 - 2.11 machines as
deprecated with reasons mentioned in its commit log.
Removing pseries-2.5 specific code with this patch for now.
Also drop sPAPRMachineClass::use_ohci_by_default which is now useless.
Suggested-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
|
|
Commit 1392617d3576 intended to tag pseries-2.1 - 2.11 machines as
deprecated with reasons mentioned in its commit log.
Removing pseries-2.4 specific code with this patch for now.
While at it, also remove SpaprMachineClass::dr_lmb_enabled which is
now turned useless.
Suggested-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
|
|
Commit 1392617d3576 intended to tag pseries-2.1 - 2.11 machines as
deprecated with reasons mentioned in its commit log.
Removing pseries-2.3 specific code with this patch for now.
While at it, also remove the dynamic-reconfiguration option which was
introduced to disable it by default for legacy machines until pseries-2.3.
Suggested-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
|
|
Commit 1392617d3576 intended to tag pseries-2.1 - 2.11 machines as
deprecated with reasons mentioned in its commit log.
Removing pseries-2.2 specific code with this patch for now.
Suggested-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
|
|
Commit 1392617d3576 intended to tag pseries-2.1 - 2.11 machines as
deprecated with reasons mentioned in its commit log.
Removing pseries-2.1 specific code with this patch for now.
Suggested-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
|
|
* target/i386: new feature bits for AMD processors
* target/i386/tcg: improvements around flag handling
* target/i386: add AVX10 support
* target/i386: add GraniteRapids-v2 model
* dockerfiles: add libcbor
* New nitro-enclave machine type
* qom: cleanups to object_new
* configure: detect 64-bit MIPS for rust
* configure: deprecate 32-bit MIPS
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmcjvkQUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroPIKgf/etNpO2T+eLFtWN/Qd5eopBXqNd9k
# KmeK9EgW9lqx2IPGNen33O+uKpb/TsMmubSsSF+YxTp7pmkc8+71f3rBMaIAD02r
# /paHSMVw0+f12DAFQz1jdvGihR7Mew0wcF/UdEt737y6vEmPxLTyYG3Gfa4NSZwT
# /V5jTOIcfUN/UEjNgIp6NTuOEESKmlqt22pfMapgkwMlAJYeeJU2X9eGYE86wJbq
# ZSXNgK3jL9wGT2XKa3e+OKzHfFpSkrB0JbQbdico9pefnBokN/hTeeUJ81wBAc7u
# i00W1CEQVJ5lhBc121d4AWMp83ME6HijJUOTMmJbFIONPsITFPHK1CAkng==
# =D4nR
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 31 Oct 2024 17:28:36 GMT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream-i386' of https://gitlab.com/bonzini/qemu: (49 commits)
target/i386: Introduce GraniteRapids-v2 model
target/i386: Add AVX512 state when AVX10 is supported
target/i386: Add feature dependencies for AVX10
target/i386: add CPUID.24 features for AVX10
target/i386: add AVX10 feature and AVX10 version property
target/i386: return bool from x86_cpu_filter_features
target/i386: do not rely on ExtSaveArea for accelerator-supported XCR0 bits
target/i386: cpu: set correct supported XCR0 features for TCG
target/i386: use + to put flags together
target/i386: use higher-precision arithmetic to compute CF
target/i386: use compiler builtin to compute PF
target/i386: make flag variables unsigned
target/i386: add a note about gen_jcc1
target/i386: add a few more trivial CCPrepare cases
target/i386: optimize TEST+Jxx sequences
target/i386: optimize computation of ZF from CC_OP_DYNAMIC
target/i386: Wrap cc_op_live with a validity check
target/i386: Introduce cc_op_size
target/i386: Rearrange CCOp
target/i386: remove CC_OP_CLR
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
AWS nitro enclaves[1] is an Amazon EC2[2] feature that allows creating
isolated execution environments, called enclaves, from Amazon EC2
instances which are used for processing highly sensitive data. Enclaves
have no persistent storage and no external networking. The enclave VMs
are based on the Firecracker microvm with a vhost-vsock device for
communication with the parent EC2 instance that spawned it and a Nitro
Secure Module (NSM) device for cryptographic attestation. The parent
instance VM always has CID 3 while the enclave VM gets a dynamic CID.
An EIF (Enclave Image Format)[3] file is used to boot an AWS nitro enclave
virtual machine. This commit adds support for AWS nitro enclave emulation
using a new machine type option '-M nitro-enclave'. This new machine type
is based on the 'microvm' machine type, similar to how real nitro enclave
VMs are based on Firecracker microvm. For nitro-enclave to boot from an
EIF file, the kernel and ramdisk(s) are extracted into a temporary kernel
and a temporary initrd file which are then hooked into the regular x86
boot mechanism along with the extracted cmdline. The EIF file path should
be provided using the '-kernel' QEMU option.
In QEMU, the vsock emulation for nitro enclave is added using vhost-user-
vsock as opposed to vhost-vsock. vhost-vsock doesn't support sibling VM
communication which is needed for nitro enclaves. So for the vsock
communication to CID 3 to work, another process that does the vsock
emulation in userspace must be run, for example, vhost-device-vsock[4]
from rust-vmm, with necessary vsock communication support in another
guest VM with CID 3. Using vhost-user-vsock also enables the possibility
to implement some proxying support in the vhost-user-vsock daemon that
will forward all the packets to the host machine instead of CID 3 so
that users of nitro-enclave can run the necessary applications in their
host machine instead of running another whole VM with CID 3. The following
mandatory nitro-enclave machine option has been added related to the
vhost-user-vsock device.
- 'vsock': The chardev id from the '-chardev' option for the
vhost-user-vsock device.
AWS Nitro Enclaves have built-in Nitro Secure Module (NSM) device which
has been added using the virtio-nsm device added in a previous commit.
In Nitro Enclaves, all the PCRs start in a known zero state and the first
16 PCRs are locked from boot and reserved. The PCR0, PCR1, PCR2 and PCR8
contain the SHA384 hashes related to the EIF file used to boot the VM
for validation. The following optional nitro-enclave machine options
have been added related to the NSM device.
- 'id': Enclave identifier, reflected in the module-id of the NSM
device. If not provided, a default id will be set.
- 'parent-role': Parent instance IAM role ARN, reflected in PCR3
of the NSM device.
- 'parent-id': Parent instance identifier, reflected in PCR4 of the
NSM device.
[1] https://docs.aws.amazon.com/enclaves/latest/user/nitro-enclave.html
[2] https://aws.amazon.com/ec2/
[3] https://github.com/aws/aws-nitro-enclaves-image-format
[4] https://github.com/rust-vmm/vhost-device/tree/main/vhost-device-vsock
Signed-off-by: Dorjoy Chowdhury <dorjoychy111@gmail.com>
Reviewed-by: Alexander Graf <graf@amazon.com>
Link: https://lore.kernel.org/r/20241008211727.49088-6-dorjoychy111@gmail.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This is in preparation for the next commit where the nitro-enclave
machine type will need to instead use a memfd backend, for the built-in
vhost-user-vsock device to work.
Signed-off-by: Dorjoy Chowdhury <dorjoychy111@gmail.com>
Reviewed-by: Alexander Graf <graf@amazon.com>
Link: https://lore.kernel.org/r/20241008211727.49088-5-dorjoychy111@gmail.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Nitro Secure Module (NSM)[1] device is used in AWS Nitro Enclaves[2]
for stripped down TPM functionality like cryptographic attestation.
The requests to and responses from NSM device are CBOR[3] encoded.
This commit adds support for NSM device in QEMU. Although related to
AWS Nitro Enclaves, the virito-nsm device is independent and can be
used in other machine types as well. The libcbor[4] library has been
used for the CBOR encoding and decoding functionalities.
[1] https://lists.oasis-open.org/archives/virtio-comment/202310/msg00387.html
[2] https://docs.aws.amazon.com/enclaves/latest/user/nitro-enclave.html
[3] http://cbor.io/
[4] https://libcbor.readthedocs.io/en/latest/
Signed-off-by: Dorjoy Chowdhury <dorjoychy111@gmail.com>
Reviewed-by: Alexander Graf <graf@amazon.com>
Link: https://lore.kernel.org/r/20241008211727.49088-3-dorjoychy111@gmail.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
https://github.com/alistair23/qemu into staging
RISC-V PR for 9.2
* Fix an access to VXSAT
* Expose RV32 cpu to RV64 QEMU
* Don't clear PLIC pending bits on IRQ lowering
* Make PLIC zeroth priority register read-only
* Set vtype.vill on CPU reset
* Check and update APLIC pending when write sourcecfg
* Avoid dropping charecters with HTIF
* Apply FIFO backpressure to guests using SiFive UART
* Support for control flow integrity extensions
* Support for the IOMMU with the virt machine
* set 'aia_mode' to default in error path
* clarify how 'riscv-aia' default works
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmci/tQACgkQr3yVEwxT
# gBNPAQ//dZKjjJm4Sh+UFdUslivBJYtL1rl2UUG2UqiNn/UoYh/vcHoSArljHTjt
# 8riEStnaQqXziOpMIJjIMLJ4KoiIk2SMvjNfFtcmPiPZEDEpjsTxfUxBFsBee+fI
# 4KNQKKFeljq4pa+VzVvXEqzCNJIzCThFXTZhZmer00M91HPA8ZQIHpv2JL1sWlgZ
# /HW24XEDFLGc/JsR55fxpPftlAqP+BfOrqMmbWy7x2Y+G8WI05hM2zTP/W8pnIz3
# z0GCRYSBlADtrp+3RqzTwQfK5pXoFc0iDktWVYlhoXaeEmOwo8IYxTjrvBGhnBq+
# ySX1DzTa23QmOIxSYYvCRuOxyOK9ziNn+EQ9FiFBt1h1o251CYMil1bwmYXMCMNJ
# rZwF1HfUx0g2GQW1ZOqh1eeyLO29JiOdV3hxlDO7X4bbISNgU6il5MXmnvf0/XVW
# Af3YhALeeDbHgHL1iVfjafzaviQc9+YrEX13eX6N2AjcgE5a3F7XNmGfFpFJ+mfQ
# CPgiwVBXat6UpBUGAt14UM+6wzp+crSgQR5IEGth+mKMKdkWoykvo7A2oHdu39zn
# 2cdzsshg2qcLLUPTFy06OOTXX382kCWXuykhHOjZ4uu2SJJ7R0W3PlYV8HSde2Vu
# Rj+89ZlUSICJNXXweQB39r87hNbtRuDIO22V0B9XrApQbJj6/yE=
# =rPaa
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 31 Oct 2024 03:51:48 GMT
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013
* tag 'pull-riscv-to-apply-20241031-1' of https://github.com/alistair23/qemu: (50 commits)
target/riscv: Fix vcompress with rvv_ta_all_1s
target/riscv/kvm: clarify how 'riscv-aia' default works
target/riscv/kvm: set 'aia_mode' to default in error path
docs/specs: add riscv-iommu
qtest/riscv-iommu-test: add init queues test
hw/riscv/riscv-iommu: add DBG support
hw/riscv/riscv-iommu: add ATS support
hw/riscv/riscv-iommu: add Address Translation Cache (IOATC)
test/qtest: add riscv-iommu-pci tests
hw/riscv/virt.c: support for RISC-V IOMMU PCIDevice hotplug
hw/riscv: add riscv-iommu-pci reference device
pci-ids.rst: add Red Hat pci-id for RISC-V IOMMU device
hw/riscv: add RISC-V IOMMU base emulation
hw/riscv: add riscv-iommu-bits.h
exec/memtxattr: add process identifier to the transaction attributes
target/riscv: Expose zicfiss extension as a cpu property
disas/riscv: enable disassembly for compressed sspush/sspopchk
disas/riscv: enable disassembly for zicfiss instructions
target/riscv: compressed encodings for sspush and sspopchk
target/riscv: implement zicfiss instructions
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
https://git.linaro.org/people/pmaydell/qemu-arm into staging
target-arm queue:
* arm/kvm: add support for MTE
* docs/system/cpu-hotplug: Update example's socket-id/core-id
* target/arm: Store FPSR cumulative exception bits in env->vfp.fpsr
* target/arm: Don't assert in regime_is_user() for E10 mmuidx values
* hw/sd/omap_mmc: Fix breakage of OMAP MMC controller
* tests/functional: Add functional tests for collie, sx1
* scripts/symlink-install-tree.py: Fix MESONINTROSPECT parsing
* docs/system/arm: Document remaining undocumented boards
* target/arm: Fix arithmetic underflow in SETM instruction
* docs/devel/reset: Fix minor grammatical error
* target/arm: kvm: require KVM_CAP_DEVICE_CTRL
# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmcg+oYZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3g/KD/4tzAD2zkWpnIPhY5ht4wBz
# Kioy+pnXJW5I6pAS4ljnI41pOFnPr6Ln1NfGkP+9pTND8lIQNY0Te2a/NjgEiYJc
# rYJ/A6UUuCqQ8+/oWWMPETcbbiKcSS2mzCJ/pNXeIquK5Co0Qk7mzdfObudwZpbw
# o3Cc9YrGZc64XAl2Rb83Oy2UHo1xjmV67wtEmcj+hmWC+tFc7pQpAKwIKcBMgns8
# ZILexX18RYZMDqQZQ5tvwTccJeFmljj9PyScou787RXK93BlF3sL/ypq1xMykRru
# JpMwAI6jD5LG9NO2zNr3FpBef8sJXqNF+O0DcYmhrKBwRkztuEU6DXF6xzdz/HRa
# c14hWK1jHku+HvKBXx3c5wibTbTU71Jv36Gw5VjOBQe/5cdKJAbZw8OH+IK8ozk9
# GwLVQ/JzrIi5m8FwXPwmkOPLX/CY8Wot6IWdJKKGTN8bY+9Cu2gTduFJIvi96HWU
# xkG1ySN61wKUR8Z26mizim2nBvQjybjqKEhrtQ21K548j4pWFVBgXJQX0Menca/v
# ziSLCd84Pmh9+DtElPCUyau/nX/jyUJ1gCScvcJjF5jAMPBREpAh53j/GL9JEgX6
# 9cX2WG6o+9R4Qcrh1O3Vy1bAUcJ27Tr2NitD+g5XObZ+vC6YgqfN2/M53so4rwws
# N4KCRdV6GcU70bQAul3mLQ==
# =KWM2
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 29 Oct 2024 15:08:54 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* tag 'pull-target-arm-20241029' of https://git.linaro.org/people/pmaydell/qemu-arm:
target/arm: kvm: require KVM_CAP_DEVICE_CTRL
docs/devel/reset: Fix minor grammatical error
target/arm: Fix arithmetic underflow in SETM instruction
docs/system/target-arm.rst: Remove "many boards are undocumented" note
docs/system/arm: Add placeholder docs for mcimx6ul-evk and mcimx7d-sabre
docs/system/arm: Add placeholder doc for xlnx-zcu102 board
docs/system/arm: Add placeholder doc for exynos4 boards
docs/system/arm: Split fby35 out from aspeed.rst
docs/system/arm: Don't use wildcard '*-bmc' in doc titles
docs/system/arm/stm32: List olimex-stm32-h405 in document title
scripts/symlink-install-tree.py: Fix MESONINTROSPECT parsing
tests/functional: Add a functional test for the sx1 board
tests/functional: Add a functional test for the collie board
hw/sd/omap_mmc: Don't use sd_cmd_type_t
target/arm: Don't assert in regime_is_user() for E10 mmuidx values
target/arm: Store FPSR cumulative exception bits in env->vfp.fpsr
docs/system/cpu-hotplug: Update example's socket-id/core-id
arm/kvm: add support for MTE
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
The RISC-V IOMMU PCI device we're going to add next is a reference
implementation of the riscv-iommu spec [1], which predicts that the
IOMMU can be implemented as a PCIe device.
However, RISC-V International (RVI), the entity that ratified the
riscv-iommu spec, didn't bother assigning a PCI ID for this IOMMU PCIe
implementation that the spec predicts. This puts us in an uncommon
situation because we want to add the reference IOMMU PCIe implementation
but we don't have a PCI ID for it.
Given that RVI doesn't provide a PCI ID for it we reached out to Red Hat
and Gerd Hoffman, and they were kind enough to give us a PCI ID for the
RISC-V IOMMU PCI reference device.
Thanks Red Hat and Gerd for this RISC-V IOMMU PCIe device ID.
[1] https://github.com/riscv-non-isa/riscv-iommu/releases/tag/v1.0.0
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Message-ID: <20241016204038.649340-5-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
|
|
The RISC-V IOMMU specification is now ratified as-per the RISC-V
international process. The latest frozen specifcation can be found at:
https://github.com/riscv-non-isa/riscv-iommu/releases/download/v1.0/riscv-iommu.pdf
Add the foundation of the device emulation for RISC-V IOMMU. It includes
support for s-stage (sv32, sv39, sv48, sv57 caps) and g-stage (sv32x4,
sv39x4, sv48x4, sv57x4 caps).
Other capabilities like ATS and DBG support will be added incrementally
in the next patches.
Co-developed-by: Sebastien Boeuf <seb@rivosinc.com>
Signed-off-by: Sebastien Boeuf <seb@rivosinc.com>
Signed-off-by: Tomasz Jeznach <tjeznach@rivosinc.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Jason Chien <jason.chien@sifive.com>
Message-ID: <20241016204038.649340-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
|
|
The current approach of using qemu_chr_fe_write() and ignoring the
return values results in dropped characters [1].
Let's update the SiFive UART to use a async sifive_uart_xmit() function
to transmit the characters and apply back pressure to the guest with
the SIFIVE_UART_TXFIFO_FULL status.
This should avoid dropped characters and more realisticly model the
hardware.
1: https://gitlab.com/qemu-project/qemu/-/issues/2114
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240910045419.1252277-3-alistair.francis@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
|
|
RV32 OpenSBI need a fw_dynamic_info parameter with 32-bit fields instead
of target_ulong.
In RV64 QEMU, target_ulong is 64. So it is not right for booting RV32 OpenSBI.
We create a fw_dynmaic_info32 struct for this purpose.
Signed-off-by: TANG Tiancheng <tangtiancheng.ttc@alibaba-inc.com>
Reviewed-by: Liu Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240919055048.562-2-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
|
|
In commit 1ab08790bb75e4 we did some refactoring of the SD card
implementation, which included a rearrangement of the sd_cmd_type_t
enum values. Unfortunately we didn't notice that this enum is not
used solely inside the SD card model itself, but is also used by the
OMAP MMC controller device. In the OMAP MMC controller, it is used
to implement the handling of the Type field of the MMC_CMD register,
so changing the enum values so that they no longer lined up with the
bit definitions for that register field broke the controller model.
The effect is that Linux fails to boot from an SD card on the "sx1"
machine.
Give omap-mmc its own enum which we can document as needing to match
the encoding used in this device's register, so it isn't sharing
sd_cmd_type_t with the SD card model any more. We can then move
sd_cmd_type_t's definition out of sd.h and into sd.c, which is the
only place that uses it.
Cc: qemu-stable@nongnu.org
Fixes: 1ab08790bb75 ("hw/sd/sdcard: Store command type in SDProto")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20241017162755.710698-1-peter.maydell@linaro.org
|
|
Request Venus when initializing VirGL and if venus=true flag is set for
virtio-gpu-gl device.
Signed-off-by: Antonio Caggiano <antonio.caggiano@collabora.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Message-Id: <20241024210311.118220-14-dmitry.osipenko@collabora.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
|
|
virtio_gpu_virgl_get_num_capsets will return "num_capsets", but we can't
assume that capset_index 1 is always VIRGL2 once we'll support more capsets,
like Venus and DRM capsets. Register capsets dynamically to avoid that problem.
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Message-Id: <20241024210311.118220-13-dmitry.osipenko@collabora.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
|
|
Support BLOB resources creation, mapping, unmapping and set-scanout by
calling the new stable virglrenderer 0.10 interface. Only enabled when
available and via the blob config. E.g. -device virtio-vga-gl,blob=true
Signed-off-by: Antonio Caggiano <antonio.caggiano@collabora.com>
Signed-off-by: Robert Beckett <bob.beckett@collabora.com> # added set_scanout_blob
Signed-off-by: Xenia Ragiadakou <xenia.ragiadakou@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Message-Id: <20241024210311.118220-12-dmitry.osipenko@collabora.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
|
|
virtio_gpu_virgl_init() may fail, leading to a further Qemu crash
because Qemu assumes it never fails. Check virtio_gpu_virgl_init()
return code and don't execute virtio commands on error. Failed
virtio_gpu_virgl_init() will result in a timed out virtio commands
for a guest OS.
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Message-Id: <20241024210311.118220-5-dmitry.osipenko@collabora.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
|
|
Move print_stats timer to VirtIOGPUGL for consistency with
cmdq_resume_bh and fence_poll that are used only by GL device.
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Message-Id: <20241024210311.118220-4-dmitry.osipenko@collabora.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
|
|
Move fence_poll timer to VirtIOGPUGL for consistency with cmdq_resume_bh
that are used only by GL device.
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Message-Id: <20241024210311.118220-3-dmitry.osipenko@collabora.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
|
|
staging
aspeed queue:
* Fixed GPIO interrupt status when in index mode
* Added GPIO support for the AST2700 SoC and specific test cases
* Fixed crypto controller (HACE) Accumulative hash function
* Converted Aspeed machine avocado tests to the new functional
framework. SDK tests still to be addressed.
* Fixed issue in the SSI controller when doing writes in user mode
* Added support for the WRSR2 register of Winbond flash devices
* Added SFDP table for the Windbond w25q80bl flash device
* Changed flash device models for the ast1030-a1 EVB
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmcZ6MIACgkQUaNDx8/7
# 7KFQPA//RTxi1PmCDlzd1ffzMWEadD3CpGLJ4RgEeZpNtkx6IF2uFFBdlNgjTSmD
# B8FdIOVb8qo2omXahKIVIgoKbGgn3U3jciH67D/x4Jyp8IhW6n5XwZzKNJ7kLVHX
# IluGmlvqNumSKl3vxsLvprC0ojRiO/SfWkzS6VOwoFPM7uNDTybQicWBBoy3Jh3e
# VVlMwIeKHMQVJGpI8PQbtnFZO4HaMqWwlo0EoIJji59fdyWULLvrXzH9YhzwFVjQ
# oCNvJUBLfxLse7c13cm/LuNmw+IQtLC5OztsOOtv1XZ1MruhJ7t316eGsQEpeWcD
# Yy5RK4mIBJMExu9oxcKOqgSznQSgenvNGWg6Z9FyyKGciylafnE8GeT35WObumyD
# v9gzgeLcw5DgvDgQXaYi4IkKyezaHoE3HPbFdBEZHBt8tn5pPGmXM0lEWL5xQ5B8
# h6HphjxIlFxeHIxYenLJowLBMOt8aFXzGboF2XCLrx19OC2zvoo7klCbFeAfZpvQ
# JMXP+GsQIe7fnBMbyXGrJh9q+/7tKR4ivtTV/vnSF0FPtyzxdoSrYsUA4SZqSWvI
# ONz62p+zlE/oXBUIaFnC2Ea41YwJ7mDbmcSU1dFxmE0xRVmoYlUocoeS2VOUmTH0
# CMgEcmMXQG0vx8nipQbScbuWRCBlf0YwJ7Y7stgI8HabmsMMbIg=
# =DqCH
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 24 Oct 2024 07:27:14 BST
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@redhat.com>" [full]
# gpg: aka "Cédric Le Goater <clg@kaod.org>" [full]
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-aspeed-20241024' of https://github.com/legoater/qemu:
test/qtest/aspeed_smc-test: Fix coding style
hw/arm/aspeed: Correct fmc_model w25q80bl for ast1030-a1 EVB
hw/arm/aspeed: Correct spi_model w25q256 for ast1030-a1 EVB.
hw/block/m25p80: Add SFDP table for w25q80bl flash
hw/block:m25p80: Support write status register 2 command (0x31) for w25q01jvq
hw/block:m25p80: Fix coding style
aspeed/smc: Fix write incorrect data into flash in user mode
tests/functional: Convert most Aspeed machine tests
hw/misc/aspeed_hace: Fix SG Accumulative hashing
tests/qtest:ast2700-gpio-test: Add GPIO test case for AST2700
aspeed/soc: Support GPIO for AST2700
aspeed/soc: Correct GPIO irq 130 for AST2700
hw/gpio/aspeed: Add AST2700 support
hw/gpio/aspeed: Fix clear incorrect interrupt status for GPIO index mode
hw/gpio/aspeed: Support different memory region ops
hw/gpio/aspeed: Support to set the different memory size
hw/gpio/aspeed: Fix coding style
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
According to the design of ASPEED SPI controllers user mode, users write the
data to flash, the SPI drivers set the Control Register(0x10) bit 0 and 1
enter user mode. Then, SPI drivers send flash commands for writing data.
Finally, SPI drivers set the Control Register (0x10) bit 2 to stop
active control and restore bit 0 and 1.
According to the design of ASPEED SMC model, firmware writes the
Control Register and the "aspeed_smc_flash_update_ctrl" function is called.
Then, this function verify Control Register(0x10) bit 0 and 1. If it set user
mode, the value of s->snoop_index is SNOOP_START else SNOOP_OFF.
If s->snoop_index is SNOOP_START, the "aspeed_smc_do_snoop" function verify
the first incomming data is a new flash command and writes the corresponding
dummy bytes if need.
However, it did not check the current unselect status. If current unselect
status is "false" and firmware set the IO MODE by Control Register bit 31:28,
the value of s->snoop_index will be changed to SNOOP_START again and
"aspeed_smc_do_snoop" misunderstand that the incomming data is the new flash
command and it causes writing unexpected data into flash.
Example:
1. Firmware set user mode by Control Register bit 0 and 1(0x03)
2. SMC model set s->snoop SNOOP_START
3. Firmware set Quad Page Program with 4-Byte Address command (0x34)
4. SMC model verify this flash command and it needs 4 dummy bytes.
5. Firmware send 4 bytes address.
6. SMC model receives 4 bytes address
7. Firmware set QPI IO MODE by Control Register bit 31. (0x80000003)
8. SMC model verify new user mode by Control Register bit 0 and 1.
Then, set s->snoop SNOOP_START again. (It is the wrong behavior.)
9. Firmware send 0xebd8c134 data and it should be written into flash.
However, SMC model misunderstand that the first incoming data, 0x34,
is the new command because the value of s->snoop is changed to SNOOP_START.
Finally, SMC sned the incorrect data to flash model.
Introduce a new unselect attribute in AspeedSMCState to save the current
unselect status for user mode and set it "true" by default.
Update "aspeed_smc_flash_update_ctrl" function to check the previous unselect
status. If both new unselect status and previous unselect status is different,
update s->snoop_index value and call "aspeed_smc_flash_do_select".
Increase VMStateDescription version.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
[ clg: - Replaced VMSTATE_BOOL -> VMSTATE_BOOL_V ]
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
Make the Aspeed HACE module use the new qcrypto accumulative hashing functions
when in scatter-gather accumulative mode. A hash context will maintain a
"running-hash" as each scatter-gather chunk is received.
Previously each scatter-gather "chunk" was cached
so the hash could be computed once the final chunk was received.
However, the cache was a shallow copy, so once the guest overwrote the
memory provided to HACE the final hash would not be correct.
Possibly related to: https://gitlab.com/qemu-project/qemu/-/issues/1121
Buglink: https://github.com/openbmc/qemu/issues/36
Signed-off-by: Alejandro Zeise <alejandro.zeise@seagate.com>
[ clg: - Checkpatch fixes
- Reworked qcrypto_hash*() error reports in do_hash_operation() ]
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Acked-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Reviewed-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
|
|
It set "aspeed_gpio_ops" struct which containing read and write callbacks
to be used when I/O is performed on the GPIO region.
Besides, in the previous design of ASPEED SOCs, one register is used for
setting one function for 32 GPIO pins.
ex: GPIO000 is used for setting data value for GPIO A, B, C and D in AST2600.
ex: GPIO004 is used for setting direction for GPIO A, B, C and D in AST2600.
However, the register set have a significant change in AST2700.
Each GPIO pin has their own control register. In other words, users are able to
set one GPIO pin’s direction, interrupt enable, input mask and so on
in one register. The aspeed_gpio_read/aspeed_gpio_write callback functions
are not compatible AST2700.
Introduce a new "const MemoryRegionOps *" attribute in AspeedGPIOClass and
use it in aspeed_gpio_realize function.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
|
|
According to the datasheet of ASPEED SOCs, a GPIO controller owns 4KB of
register space for AST2700, AST2500, AST2400 and AST1030; owns 2KB of
register space for AST2600 1.8v and owns 2KB of register space for
AST2600 3.3v.
It set the memory region size 2KB by default and it does not compatible
register space for AST2700.
Introduce a new class attribute to set the GPIO controller memory size
for different ASPEED SOCs.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
|
|
Fix coding style issues from checkpatch.pl
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
|
|
Because virtio-scsi type devices use a non-architected IPLB pbt code they cannot
be set and stored normally. Instead, the IPLB must be rebuilt during re-ipl.
As s390x does not natively support multiple boot devices, the devno field is
used to store the position in the boot order for the device.
Handling the rebuild as part of DIAG308 removes the need to check the devices
for invalid IPLBs later in the IPL.
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241020012953.1380075-17-jrossi@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
Build an IPLB for any device with a bootindex (up to a maximum of 8 devices).
The IPLB chain is placed immediately before the BIOS in memory. Because this
is not a fixed address, the location of the next IPLB and number of remaining
boot devices is stored in the QIPL global variable for possible later access by
the guest during IPL.
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241020012953.1380075-16-jrossi@linux.ibm.com>
[thuth: Fix endianness problem when accessing the qipl structure]
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
Add a loadparm property to the VirtioCcwDevice object so that different
loadparms can be defined on a per-device basis for CCW boot devices.
The machine/global loadparm is still supported. If both a global and per-device
loadparm are defined, the per-device value will override the global value for
that device, but any other devices that do not specify a per-device loadparm
will still use the global loadparm.
It is invalid to assign a loadparm to a non-boot device.
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241020012953.1380075-15-jrossi@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
Currently, structures defined in both hw/s390x/ipl.h and pc-bios/s390-ccw/iplb.h
must be kept in sync, which is prone to error. Instead, create a new directory
at include/hw/s390x/ipl/ to contain the definitions that must be shared.
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241020012953.1380075-14-jrossi@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
staging
pull-loongarch-20241016
# -----BEGIN PGP SIGNATURE-----
#
# iLMEAAEKAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZw91kQAKCRBAov/yOSY+
# 3+RyA/9vpqCesEBch5mzrazO4MT2IxeN2bstF8mY+EyfEwK7Ocg+esRBsigWw56k
# y6RDyCzHg200GL9TC8bJ/nMiMJjXrahhHRPVs8AADazMzX/Ys7E7ntvUUnqqANh6
# ZX8fzNJMKW6qeUVrCIwCC7E+KjfNu32dcxbXCF4mZsehIumpUQ==
# =uk+a
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 16 Oct 2024 09:13:05 BST
# gpg: using RSA key B8FF1DA0D2FDCB2DA09C6C2C40A2FFF239263EDF
# gpg: Good signature from "Song Gao <m17746591750@163.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B8FF 1DA0 D2FD CB2D A09C 6C2C 40A2 FFF2 3926 3EDF
* tag 'pull-loongarch-20241016' of https://gitlab.com/gaosong/qemu:
hw/loongarch/fw_cfg: Build in common_ss[]
hw/loongarch/virt: Remove unnecessary 'cpu.h' inclusion
target/loongarch: Avoid bits shift exceeding width of bool type
hw/loongarch/virt: Add FDT table support with acpi ged pm register
acpi: ged: Add macro for acpi sleep control register
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
staging
Remove some target-specific endianness knowledge from target/.
For MIPS, propagate endianness at the board level, using QOM property.
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmcOihcACgkQ4+MsLN6t
# wN4VaRAAor+5gUJiV0OOMQVfP8e1o9ssKcYy9m31zLeii1Iq2M/2oz6YK4OjdQDe
# oJ8VRJvBPKC2Bpi14TfKsSGaP8CGNO/hdxcMi71pjHZC+bjHt5Uv0U/7T4XCBWuV
# N+85juN1PTc4cci4FkGIXaPB1YWL00L56BDCzja0uhLF4+Xe2eYGVrPXeFCkN/3I
# Ky7jHlB/dgzc47kTXvg5snCee2egDFf/x4igwZj6+gWJyo+jubRpwoOqKbK2M0Nd
# VvNpBVFNGZMP3Fn9lh45uDOuRWGu6zSIPBVkjoFc+wdGsFsITIMrZ3h46UffsGTJ
# F1j6Zsq6hoLbaNRRjZ6OsN6u683oo1lknmWauD62LrjXcX0RlRwRFbMD0AjedR8t
# 6+YHg5LlwGg6r/AOtEe28ggXZohB2vjr2V0MJm1x/XgLYhFHoN3//jxn22oOHj4p
# 0z3+eDc3Se8JNRV6jPMHbbuTqZqZjRgVFbYN3aMbdoXYzhpYnrPj6f7WQL2smiAW
# C2vdswrubQWKou1wcn6rbg0nnMRVTh+GxrtZ3mkgaxNzgNFxsrX8YubMsh77XUcr
# mnCGj1tE3hp40xsuSk6yZXY3ZZiTyZasvO1wq4gWOI9le0Zmq+d335F9+IVJ8RlP
# YhA+MY5aeomsixVRdmrPrgOfanQiHXv02lsbperU8QFfGRhf2Y8=
# =Qydb
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 15 Oct 2024 16:28:23 BST
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* tag 'single-binary-20241015' of https://github.com/philmd/qemu: (33 commits)
hw/mips: Have mips_cpu_create_with_clock() take an endianness argument
hw/mips/cps: Set the vCPU 'cpu-big-endian' property
target/mips: Expose MIPSCPU::is_big_endian property
target/mips: Use tcg_constant_tl() instead of tcg_gen_movi_tl()
target/mips: Use gen_op_addr_addi() when possible
target/mips: Have gen_addiupc() expand $pc during translation
target/mips: Replace MO_TE by mo_endian()
target/mips: Introduce mo_endian() helper
target/mips: Remove unused MEMOP_IDX() macro
target/mips: Rename unused sysemu argument of OP_LD_ATOMIC()
target/mips: Explode MO_TExx -> MO_TE | MO_xx
target/mips: Factor mo_endian_rev() out of MXU code
target/mips: Convert mips16e decr_and_load/store() macros to functions
target/mips: Replace MO_TE by mo_endian_env() in get_pte()
target/mips: Introduce mo_endian_env() helper
target/mips: Rename cpu_is_bigendian() -> disas_is_bigendian()
target/mips: Declare mips_env_is_bigendian() in 'internal.h'
hw/xtensa/xtfpga: Remove TARGET_BIG_ENDIAN #ifdef'ry
target/ppc: Use tcg_constant_tl() instead of tcg_gen_movi_tl()
target/tricore: Use tcg_constant_tl() instead of tcg_gen_movi_tl()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240927213254.17552-2-philmd@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
|
|
Macro definition is added for acpi sleep control register, ged emulation
driver can use the macro , also it can be used in FDT table if ged is
exposed with FDT table.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240918014206.2165821-2-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
|
|
Have the CPS expose a 'cpu-big-endian' property so it can
set it to the vCPUs it creates.
Note, since the number of vCPUs created is dynamic, we can
not use QOM aliases.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241010215015.44326-16-philmd@linaro.org>
|
|
The ecc.c code was used only by the PXA2xx and OMAP2 SoC devices,
which we have removed, so it is now completely unused.
Note that hw/misc/eccmemctl.c does not in fact use any of the
code frome ecc.c, so that KConfig dependency was incorrect.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20241003140010.1653808-6-peter.maydell@linaro.org
|
|
The only PCMCIA subsystem was the PXA2xx SoC and the machines
using it, which have now been removed. Although in theory
we have a few machine types which have PCMCIA (e.g. kzm,
the strongarm machines, sh4's sh7750), none of those machines
implement their PCMCIA controller, and they're all old and
no longer very interesting machine types.
Rather than keeping all the PCMCIA code in-tree without any
active users of it, delete it. If we need PCMCIA in future
we can always resurrect it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20241003140010.1653808-5-peter.maydell@linaro.org
|
