Age | Commit message (Collapse) | Author |
|
Whilst the reported version was 1 so there should be no changes,
a couple of fields (where the value 0 was valid) were not
defined. Make those explicit and update references to be based
on CXL r3.1.
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240126121636.24611-5-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Part of bringing all of CXL emulation inline with CXL r3.1.
No functional changes.
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240126121636.24611-4-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Not actually implemented, but we need to reserve more space for
the larger version of the structure in CXL r3.1.
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240126121636.24611-3-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Part of standardizing the QEMU code on CXL r3.1.
No fuctional changes as everything added is optional and
it is set as not implemented.
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240126121636.24611-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
In the current mdev_reg_read() implementation, it consistently returns
that the Media Status is Ready (01b). This was fine until commit
25a52959f99d ("hw/cxl: Add support for device sanitation") because the
media was presumed to be ready.
However, as per the CXL 3.0 spec "8.2.9.8.5.1 Sanitize (Opcode 4400h)",
during sanitation, the Media State should be set to Disabled (11b). The
mentioned commit correctly sets it to Disabled, but mdev_reg_read()
still returns Media Status as Ready.
To address this, update mdev_reg_read() to read register values instead
of returning dummy values.
Note that __toggle_media() managed to not only write something
that no one read, it did it to the wrong register storage and
so changed the reported mailbox size which was definitely not
the intent. That gets fixed as a side effect of allocating
separate state storage for this register.
Fixes: commit 25a52959f99d ("hw/cxl: Add support for device sanitation")
Signed-off-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240126120132.24248-7-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
TYPE_ISA_PARALLEL
The real SuperI/O chips emulated by QEMU allow for relocating and enabling or
disabling their SuperI/O functions via software. So far this is not implemented.
Prepare for that by adding isa_parallel_set_{enabled,iobase}.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20240114123911.4877-10-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
TYPE_ISA_SERIAL
The real SuperI/O chips emulated by QEMU allow for relocating and enabling or
disabling their SuperI/O functions via software. So far this is not implemented.
Prepare for that by adding isa_serial_set_{enabled,iobase}.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20240114123911.4877-9-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The real SuperI/O chips emulated by QEMU allow for relocating and enabling or
disabling their SuperI/O functions via software. So far this is not implemented.
Prepare for that by adding isa_fdc_set_{enabled,iobase}.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20240114123911.4877-8-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
ParallelState::portio_list isn't used inside ParallelState context but only
inside ISAParallelState context, so move it there.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <20240114123911.4877-4-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
QEMU populates the apic_state attribute of x86 CPUs if supported by real
hardware or if SMP is active. When handling interrupts, it just checks whether
apic_state is populated to route the interrupt to the PIC or to the APIC.
However, chapter 10.4.3 of [1] requires that:
When IA32_APIC_BASE[11] is 0, the processor is functionally equivalent to an
IA-32 processor without an on-chip APIC.
This means that when apic_state is populated, QEMU needs to check for the
MSR_IA32_APICBASE_ENABLE flag in addition. Implement this which fixes some
real-world BIOSes.
[1] Intel 64 and IA-32 Architectures Software Developer's Manual, Vol. 3A:
System Programming Guide, Part 1
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20240106132546.21248-3-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
This commit adds support for x2APIC transitions when writing to
MSR_IA32_APICBASE register and finally adds CPUID_EXT_X2APIC to
TCG_EXT_FEATURES.
The set_base in APICCommonClass now returns an integer to indicate error in
execution. apic_set_base return -1 on invalid APIC state transition,
accelerator can use this to raise appropriate exception.
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Message-Id: <20240111154404.5333-4-minhquangbui99@gmail.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
This commit extends the APIC ID to 32-bit long and remove the 255 max APIC
ID limit in userspace APIC. The array that manages local APICs is now
dynamically allocated based on the max APIC ID of created x86 machine.
Also, new x2APIC IPI destination determination scheme, self IPI and x2APIC
mode register access are supported.
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Message-Id: <20240111154404.5333-3-minhquangbui99@gmail.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
This commit creates apic_register_read/write which are used by both
apic_mem_read/write for MMIO access and apic_msr_read/write for MSR access.
The apic_msr_read/write returns -1 on error, accelerator can use this to
raise the appropriate exception.
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Message-Id: <20240111154404.5333-2-minhquangbui99@gmail.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
This patch derives vhost-user-input from vhost-user-base class, so make
the input stub as a simpler boilerplate wrapper.
With the refactoring, vhost-user-input adds the property 'chardev', this
leads to conflict with the vhost-user-input-pci adds the same property.
To resolve the error, remove the duplicate property from
vhost-user-input-pci.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-Id: <20231120043721.50555-5-leo.yan@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240104210945.1223134-12-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Tested with rust-vmm vhost-user-sound daemon:
RUST_LOG=trace cargo run --bin vhost-user-sound -- --socket /tmp/snd.sock --backend null
Invocation:
qemu-system-x86_64 \
-qmp unix:./qmp-sock,server,wait=off \
-m 4096 \
-numa node,memdev=mem \
-object memory-backend-file,id=mem,size=4G,mem-path=/dev/shm,share=on \
-D qemu.log \
-d guest_errors,trace:\*snd\*,trace:\*sound\*,trace:\*vhost\* \
-chardev socket,id=vsnd,path=/tmp/snd.sock \
-device vhost-user-snd-pci,chardev=vsnd,id=snd \
/path/to/disk
[AJB: imported from https://github.com/epilys/qemu-virtio-snd/commit/54ae1cdd15fef2d88e9e387a175f099a38c636f4.patch]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-Id: <20240104210945.1223134-7-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Now we can take advantage of the new base class and make
vhost-user-i2c a much simpler boilerplate wrapper. Also as this
doesn't require any target specific hacks we only need to build the
stubs once.
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240104210945.1223134-6-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Now the new base class supports config handling we can take advantage
and make vhost-user-gpio a much simpler boilerplate wrapper. Also as
this doesn't require any target specific hacks we only need to build
the stubs once.
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240104210945.1223134-5-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Now we can take advantage of our new base class and make
vhost-user-rng a much simpler boilerplate wrapper. Also as this
doesn't require any target specific hacks we only need to build the
stubs once.
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240104210945.1223134-4-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Lets keep a cleaner split between the base class and the derived
vhost-user-device which we can use for generic vhost-user stubs. This
includes an update to introduce the vq_size property so the number of
entries in a virtq can be defined.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240104210945.1223134-2-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Currently the DRQ IRQ is updated every time DMA data is sent/received which
is both inefficient and causes excessive logging of the DRQ state. Add a
new drq_state bool that only updates the DRQ IRQ if its state changes.
This commit adds the new drq_state bool to the migration state: since the
version number has already been increased earlier in the series, there is
no need to repeat it again here. The DRQ IRQ is (currently) only used for
PDMA transfers which already have a migration break in this series so
there are no problems setting its value post-load.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-87-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
|
|
The IRQ represented by irq_data is actually the DRQ (DMA request) line so rename
it accordingly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-86-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
|
|
According to the datasheet the previous ESP command remains in the ESP_CMD
register, which caused a problem when consecutive TI commands were issued as
it becomes impossible for the state machine to know when the first TI
command finishes.
This was the original reason for introducing the ti_cmd field which kept
track of the last written command for this purpose. However closer reading
of the datasheet shows that a TI command that terminates due to a change of
SCSI target phase resets the ESP_CMD register to zero which solves this
problem.
Now that this has been fixed in the previous commit, remove the unneeded
ti_cmd field and access the ESP_CMD register directly instead. Bump the
vmstate_esp version to indicate that the ti_cmd field is no longer included.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-64-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
|
|
This field is currently used to handle deferred interrupts for the DATA IN phase
but the code will soon be updated to do the same for the DATA OUT phase.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-58-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
|
|
Note that this is a migration break for the q800 machine because the extra PDMA
information is no longer included.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-57-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
|
|
The special logic in write_response_pdma_cb() is now no longer required since
esp_do_dma() can be used as a direct replacement.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-55-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
|
|
do_dma_pdma_cb()
The special logic in satn_stop_pdma_cb() is now no longer required since
esp_do_dma() can be used as a direct replacement.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-53-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
|
|
do_dma_pdma_cb()
The special logic in satn_pdma_cb() is now no longer required since esp_do_dma()
can be used as a direct replacement.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-50-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
|
|
This can now be handled by the existing do_dma_pdma_cb() function.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-37-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
|
|
staging
target/hppa: Enhancements and fixes
Some enhancements and fixes for the hppa target.
The major change is, that this patchset adds a new SeaBIOS-hppa firmware
which is built as 32- and 64-bit firmware.
The new 64-bit firmware is necessary to fully support 64-bit operating systems
(HP-UX, Linux, NetBSD,...).
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZcquAQAKCRD3ErUQojoP
# X9pjAQCVsWyuYlGCW2paIGVWKV0vsOpwetUrbhRtFUZGqZxb4AD9FbMsXRcCN/oq
# CotBPY/a8MEzIQcwYl5QbcI5nNW4ygs=
# =RA0B
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 12 Feb 2024 23:47:13 GMT
# gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg: aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603
# Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F
* tag 'hppa64-pull-request' of https://github.com/hdeller/qemu-hppa:
hw/hppa/machine: Load 64-bit firmware on 64-bit machines
target/hppa: Update SeaBIOS-hppa to version 16
hw/net/tulip: add chip status register values
target/hppa: PDC_BTLB_INFO uses 32-bit ints
target/hppa: Allow read-access to PSW with rsm 0,reg instruction
lasi: Add reset I/O ports for LASI audio and FDC
target/hppa: Implement do_transaction_failed handler for I/O errors
lasi: allow access to LAN MAC address registers
hw/pci-host/astro: Implement Hard Fail and Soft Fail mode
hw/pci-host/astro: Avoid aborting on access failure
target/hppa: Add "diag 0x101" for console output support
disas/hppa: Add disassembly for qemu specific instructions
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
QAPI patches patches for 2024-02-12
# -----BEGIN PGP SIGNATURE-----
#
# iQJGBAABCAAwFiEENUvIs9frKmtoZ05fOHC0AOuRhlMFAmXJ4PsSHGFybWJydUBy
# ZWRoYXQuY29tAAoJEDhwtADrkYZTDwsP/iEdmZmjoxMedTzec+GGl5QxfMkqLn14
# eX2jXtzLGZMjGMh4lvMaAdn0AJ3VnBOqxly14sMK6TMWGZkNKJpKF+2Cj8IKte1o
# MlpS1N/7rZxew+B9HkulhS+6UFB3Jndsflm2ot4g+rRjohJCw0v0GapEqjQg6CKp
# efJhiPuBSImm2MSx+n4dj8gkcFOMrgo6oc2ZpN0ypvGb4mupPpnNj6v12yZL8FUM
# Enwsk+pBLQWoYxI9MFDGc0gW9ZBlEdP/nVq/PbglD06Urc241AHGYqT7XLT0oHLl
# 6NA4v3N4GPdSe6oJdOHDFVR+/uPKiiyrseTdYTSGgAN8gcRtHam4WWhqSDIN3Afl
# y41A9ZKkW51TpdszQ6wCdrgbTH5z6K5vnwWfVTwIgdI0mrDcAGWnc2Yr7m6c3fS8
# /Vz00J7OC0P1nXh0IeRxXExXSmaGUUgS3T/KBXPYr0PQPe7Qd+1eTQN6LaliEMRH
# dRpXQabjLmztMhc5VXCv8ihwa7mNVaEn++uRrdKoWOvIQEp0ZeZfxCzp+/2mGPJ0
# YKJc7Ja260h2Y00/Zu2XiwjdzgG+h+QuJO/3OFsZIV5ftFqSBRMCHiGEfANHidld
# Cpo0efeWWTPdV8BQOirGGr0qtDTmgFMFCZTJMsI/g0m9sMCv0WbTtmWNThwaI3uD
# MKnEGG+KX7vD
# =nhrQ
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 12 Feb 2024 09:12:27 GMT
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* tag 'pull-qapi-2024-02-12' of https://repo.or.cz/qemu/armbru:
MAINTAINERS: Cover qapi/stats.json
MAINTAINERS: Cover qapi/cxl.json
qapi/migration: Add missing tls-authz documentation
qapi: Add missing union tag documentation
qapi: Move @String out of common.json to discourage reuse
qapi: Improve documentation of file descriptor socket addresses
qapi: Plug trivial documentation holes around former simple unions
qapi/dump: Clean up documentation of DumpGuestMemoryCapability
qapi/yank: Clean up documentaion of yank
qga/qapi-schema: Plug trivial documentation holes
qga/qapi-schema: Clean up documentation of guest-set-vcpus
qga/qapi-schema: Clean up documentation of guest-set-memory-blocks
qapi: Require member documentation (with loophole)
sphinx/qapidoc: Drop code to generate doc for simple union tag
qapi: Indent tagged doc comment sections properly
qapi/block-core: Fix BlockLatencyHistogramInfo doc markup
docs/devel/qapi-code-gen: Tweak doc comment whitespace
docs/devel/qapi-code-gen: Normalize version refs x.y.0 to just x.y
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
https://gitlab.com/stsquad/qemu into staging
testing, doc and gdbstub updates:
- add sqlite3 to openSUSE image
- mark CRIS as deprecated
- re-enable the TCG plugin tests
- use select for semihosting
- implement syscall catching in gdbstub
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmXGZtQACgkQ+9DbCVqe
# KkTegAgAg7Kkd0Pa2cgkPfNPYR5yT4hYurjVSfi/69cOpj/Vadsav4WWFsuUiQMI
# FfKWCNDo5lmNcWIPKgC0oeWVwxal4IhqhO8f9lRIYqg9z4bRkZbdsrvh8J52Q6Xh
# Bu9UAEk5KBGrMfEdsAwHnVDg435c7IGdJZnE/iKBK1aKljS5LOiX1J6ZxrqUoMsJ
# keTAcdXyvs/BIz68c87AHrW/HKO9KKLgHA2n7T/l2N5KJdoa3p8La9py+v1SGUh8
# 6JlDRYR1H16mITS8tm6ZffPqcOpfHXp7DRquu7obVS5+CVTJ2H9w8TICw56rqMg7
# cVnysNLhdS18cMNKD2Jx3zgd5Nq/cg==
# =deHm
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 09 Feb 2024 17:54:28 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* tag 'pull-maintainer-updates-090224-1' of https://gitlab.com/stsquad/qemu:
tests/tcg: Add the syscall catchpoint gdbstub test
gdbstub: Implement catching syscalls
gdbstub: Add syscall entry/return hooks
gdbstub: Allow specifying a reason in stop packets
gdbstub: Expose TARGET_SIGTRAP in a target-agnostic way
kconfig: use "select" to enable semihosting
Revert "hw/elf_ops: Ignore loadable segments with zero size"
configure: run plugin TCG tests again
docs: mark CRIS support as deprecated
tests/docker: Add sqlite3 module to openSUSE Leap container
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
SocketAddress branch @fd is documented in enum SocketAddressType,
unlike the other branches. That's because the branch's type is String
from common.json.
Use a local copy of String, so we can put the documentation in the
usual place.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240205074709.3613229-14-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
|
|
Linux writes zeroes at bootup into the default ports for LASI audio and
LASI floppy controller to reset those devices. Allow writing to those
registers to avoid HPMCs.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The Astro/Elroy chip can work in either Hard-Fail or Soft-Fail mode.
Hard fail means the system bus will send an HPMC (=crash) to the
processor, soft fail means the system bus will ignore timeouts of
MMIO-reads or MMIO-writes and return -1ULL.
The HF mode is controlled by a bit in the status register and is usually
programmed by the OS. Return the corresponing values based on the current
value of that bit.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
|
|
This regressed qemu-system-xtensa:
TEST test_load_store on xtensa
qemu-system-xtensa: Some ROM regions are overlapping
These ROM regions might have been loaded by direct user request or by default.
They could be BIOS/firmware images, a guest kernel, initrd or some other file loaded into guest memory.
Check whether you intended to load all this guest code, and whether it has been built to load to the correct addresses.
The following two regions overlap (in the memory address space):
test_load_store ELF program header segment 1 (addresses 0x0000000000001000 - 0x0000000000001f26)
test_load_store ELF program header segment 2 (addresses 0x0000000000001ab8 - 0x0000000000001ab8)
make[1]: *** [Makefile:187: run-test_load_store] Error 1
This reverts commit 62570f1434160d356311e1c217537e24a4ac85cd.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240207163812.3231697-5-alex.bennee@linaro.org>
|
|
https://github.com/alistair23/qemu into staging
RISC-V PR for 9.0
* Check for 'A' extension on all atomic instructions
* Add support for 'B' extension
* Internally deprecate riscv_cpu_options
* Implement optional CSR mcontext of debug Sdtrig extension
* Internally add cpu->cfg.vlenb and remove cpu->cfg.vlen
* Support vlenb and vregs[] in KVM
* RISC-V gdbstub and TCG plugin improvements
* Remove vxrm and vxsat from FCSR
* Use RISCVException as return type for all csr ops
* Use g_autofree more and fix a memory leak
* Add support for Zaamo and Zalrsc
* Support new isa extension detection devicetree properties
* SMBIOS support for RISC-V virt machine
* Enable xtheadsync under user mode
* Add rv32i,rv32e and rv64e CPUs
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmXGBRAACgkQr3yVEwxT
# gBPqVA//etMiwP8+lQb2E4pw+QwBIzpm3qFyBlqgSCFrekj1u2kYNd4CH3CKurWE
# ysoQ6OAMeb0MUbRHdjrejjzD/wOg7JNA9h7ynM1VbupveBrJY3GWC6qQWSG+A1j/
# LSgmr/dDya74chDxjxa+7ld3xqloHi5OtdGaeORfdPXl7mjCCKKCoSKYCex1ykup
# uuB7bsjeWeWEbuUsntmeuHJLZJuhpnbuZJmp17tEo+3vWXqjxV00Lik+XMwh3gua
# KOLiAqHjGr2NEhA3Mg1JLcQ+6JLTDM9ugZpQeNGQwMkfuB/RAU7jO/1Di3flbadF
# 8l2xOHu3mydDbfdxTGZNJjcIrMTX/YEewAYZLRYpNsyPOMntgq8HEegwCdWGvK7C
# M5Tc59MNSuBt+zkZkHd21qLYusa2ThP4YT/schh7IA+2F1TSKdhlptEzi2oebIc7
# ilLSgZ9Of72QlAH2OPJNSAL9Nbc06MHEM0JiHIJa5u+XdcVRhZus5h1YIOKXisqF
# YPP22RnI5Jj5d5csa/0ONAZGFh5SRMTJtpjKoKSkzoYJWDjCQ2MiUAOmLscchMZd
# wbK0vjeRf6kRG4U4z7nTmHS9kzH8RXUZDecVcOITuMpKih9LhUiCZ+xPunFYPycJ
# WNFa9/pENcCXJweXvtk4NHwx933rX56678lF6KY2hwUwwaiBOv4=
# =yuRM
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 09 Feb 2024 10:57:20 GMT
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013
* tag 'pull-riscv-to-apply-20240209' of https://github.com/alistair23/qemu: (61 commits)
target/riscv: add rv32i, rv32e and rv64e CPUs
target/riscv/cpu.c: add riscv_bare_cpu_init()
target/riscv: Enable xtheadsync under user mode
qemu-options: enable -smbios option on RISC-V
target/riscv: SMBIOS support for RISC-V virt machine
smbios: function to set default processor family
smbios: add processor-family option
target/riscv: support new isa extension detection devicetree properties
target/riscv: use misa_mxl_max to populate isa string rather than TARGET_LONG_BITS
target/riscv: Expose Zaamo and Zalrsc extensions
target/riscv: Check 'A' and split extensions for atomic instructions
target/riscv: Add Zaamo and Zalrsc extension infrastructure
hw/riscv/virt.c: use g_autofree in create_fdt_*
hw/riscv/virt.c: use g_autofree in virt_machine_init()
hw/riscv/virt.c: use g_autofree in create_fdt_virtio()
hw/riscv/virt.c: use g_autofree in create_fdt_sockets()
hw/riscv/virt.c: use g_autofree in create_fdt_socket_cpus()
hw/riscv/numa.c: use g_autofree in socket_fdt_write_distance_matrix()
hw/riscv/virt-acpi-build.c: fix leak in build_rhct()
target/riscv: Use RISCVException as return type for all csr ops
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Provide a function to set the default processor family.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20240123184229.10415-3-heinrich.schuchardt@canonical.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
|
|
Block layer patches
- Allow concurrent BB context changes
- virtio: Re-enable notifications after drain
- virtio-blk: Fix missing use of irqfd
- scsi: Don't ignore most usb-storage properties
- blkio: Respect memory-alignment for bounce buffer allocations
- iotests tmpdir fixes
- virtio-blk: Code cleanups
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEE3D3rFZqa+V09dFb+fwmycsiPL9YFAmXEkwgRHGt3b2xmQHJl
# ZGhhdC5jb20ACgkQfwmycsiPL9Y3jA//TmSBVqHljauyImYOgCt8qCXACttV0xhQ
# Q5ldUNx/JmIFMoUR7OlpVAL2MtvdwE0jjY+sDlEmWtz4IFJcCsCTUCHZZb8blreb
# +mnMkqrQ6Nb3tPR2jeIknrXqNy1ffyjZItktjWXVcl6jaHB8YabHHqszs9DIaf4n
# lcKovBKxula8ckMgvm48wCwTtS7VEPeuC5FrOqUqTtuhg+QKp5ZVoyVFHtf6GKTD
# iuXzCd4yxu4fDKAthJJj4N1bQaOmCKU7K9N/665wj9P2TyfmwlBAfNwNAlYbdX1E
# Sv7eSioQs2+oUxmfD/PUsF7wTYtDCrSAUFn1kP/XdRyXPJR3dHGiBKV9w9CaWNrU
# y8rqOhxVcuoBLRljTF32BK4HniAREjRngtpT2FnQQIyedZrXIwyTAWjs+LW12T6O
# NMiU603Nl9ZYhO1et2+qspsVpNIfEpQWpK+OCon6E+ggj1ea+pfqU30VPx4JU05I
# VLiydluIbehSkRlTHgFcTgApmx843OGW7CvWfRyen86Cexgx3DEjJUQ4/bYqaCha
# yLIi91rToSDmtlzJrg9eYiMs5Y6vz+ORvvX5im1RlbUUb7Kx/LaA4BU/uArEbBt8
# xXm/grO4hFUGqtLgd2LIjWaHSsLoW4jKeEiExFUUfvH5DG9Zl5HmzFwu+DYxX+im
# MJLLetDJAWI=
# =8tc0
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 08 Feb 2024 08:38:32 GMT
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* tag 'for-upstream' of https://repo.or.cz/qemu/kevin:
virtio-blk: avoid using ioeventfd state in irqfd conditional
virtio-blk: Use ioeventfd_attach in start_ioeventfd
virtio: Re-enable notifications after drain
virtio-scsi: Attach event vq notifier with no_poll
blkio: Respect memory-alignment for bounce buffer allocations
scsi: Don't ignore most usb-storage properties
virtio-blk: do not use C99 mixed declarations
iotests: give tempdir an identifying name
iotests: fix leak of tmpdir in dry-run mode
scsi: Await request purging
block-backend: Allow concurrent context changes
monitor: use aio_co_reschedule_self()
virtio-blk: declare VirtIOBlock::rq with a type
virtio-blk: add vq_rq[] bounds check in virtio_blk_dma_restart_cb()
virtio-blk: clarify that there is at least 1 virtqueue
virtio-blk: enforce iothread-vq-mapping validation
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
usb-storage is for the most part just a wrapper around an internally
created scsi-disk device. It uses DEFINE_BLOCK_PROPERTIES() to offer all
of the usual block device properties to the user, but then only forwards
a few select properties to the internal device while the rest is
silently ignored.
This changes scsi_bus_legacy_add_drive() to accept a whole BlockConf
instead of some individual values inside of it so that usb-storage can
now pass the whole configuration to the internal scsi-disk. This enables
the remaining block device properties, e.g. logical/physical_block_size
or discard_granularity.
Buglink: https://issues.redhat.com/browse/RHEL-22375
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20240131130607.24117-1-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
The VirtIOBlock::rq field has had the type void * since its introduction
in commit 869a5c6df19a ("Stop VM on error in virtio-blk. (Gleb
Natapov)").
Perhaps this was done to avoid the forward declaration of
VirtIOBlockReq.
Hanna Czenczek <hreitz@redhat.com> pointed out the missing type. Specify
the actual type because there is no need to use void * here.
Suggested-by: Hanna Czenczek <hreitz@redhat.com>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20240206190610.107963-5-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
QEMU initializes preallocated backend memory as the objects are parsed from
the command line. This is not optimal in some cases (e.g. memory spanning
multiple NUMA nodes) because the memory objects are initialized in series.
Allow the initialization to occur in parallel (asynchronously). In order to
ensure optimal thread placement, asynchronous initialization requires prealloc
context threads to be in use.
Signed-off-by: Mark Kanda <mark.kanda@oracle.com>
Message-ID: <20240131165327.3154970-2-mark.kanda@oracle.com>
Tested-by: Mario Casquero <mcasquer@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
|
|
tests/tcg: Fix multiarch/gdbstub/prot-none.py
hw/core: Convert cpu_mmu_index to a CPUClass hook
tcg/loongarch64: Set vector registers call clobbered
target/sparc: floating-point cleanup
linux-user/aarch64: Add padding before __kernel_rt_sigreturn
# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmW95WkdHHJpY2hhcmQu
# aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV/p+Qf/eVmh5q0pZqcur7ft
# 8FO0wlIz55OfhaA9MIpH7LEIHRKY37Ybebw2K6SPnx4FmPhLkaj4KXPPjT2nzdXw
# J2nQM+TOyxOd18GG8P80qFQ1a72dj8VSIRVAl9T46KuPXS5B7luArImfBlUk/GwV
# Qr/XkOPwVTp05E/ccMJ8PMlcVZw9osHVLqsaFVbsUv/FylTmstzA9c5Gw7/FTfkG
# T2rk+7go+F4IXs/9uQuuFMOpQOZngXE621hnro+qle7j9oarEUVJloAgVn06o59O
# fUjuoKO0aMCr2iQqNJTH7Dnqp5OIzzxUoXiNTOj0EimwWfAcUKthoFO2LGcy1/ew
# wWNR/Q==
# =e3J3
# -----END PGP SIGNATURE-----
# gpg: Signature made Sat 03 Feb 2024 07:04:09 GMT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* tag 'pull-tcg-20240202-2' of https://gitlab.com/rth7680/qemu: (58 commits)
linux-user/aarch64: Add padding before __kernel_rt_sigreturn
target/sparc: Remove FSR_FTT_NMASK, FSR_FTT_CEXC_NMASK
target/sparc: Split fcc out of env->fsr
target/sparc: Remove cpu_fsr
target/sparc: Split cexc and ftt from env->fsr
target/sparc: Merge check_ieee_exceptions with FPop helpers
target/sparc: Clear cexc and ftt in do_check_ieee_exceptions
target/sparc: Split ver from env->fsr
target/sparc: Introduce cpu_get_fsr, cpu_put_fsr
target/sparc: Remove qt0, qt1 temporaries
target/sparc: Use i128 for Fdmulq
target/sparc: Use i128 for FdTOq, FxTOq
target/sparc: Use i128 for FsTOq, FiTOq
target/sparc: Use i128 for FCMPq, FCMPEq
target/sparc: Use i128 for FqTOd, FqTOx
target/sparc: Use i128 for FqTOs, FqTOi
target/sparc: Use i128 for FADDq, FSUBq, FMULq, FDIVq
target/sparc: Use i128 for FSQRTq
target/sparc: Inline FNEG, FABS
target/sparc: Introduce gen_{load,store}_fpr_Q
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
To be used after all targets have populated the hook.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
https://git.linaro.org/people/pmaydell/qemu-arm into staging
target/arm: fix exception syndrome for AArch32 bkpt insn
pci, vmbus, adb, s390x/css-bridge: Switch buses to 3-phase reset
system/vl.c: Fix handling of '-serial none -serial something'
target/arm: Add ID_AA64ZFR0_EL1.B16B16 to the exposed-to-userspace set
tests/qtest/xlnx-versal-trng-test.c: Drop use of variable length array
target/arm: Reinstate "vfp" property on AArch32 CPUs
doc/sphinx/hxtool.py: add optional label argument to SRST directive
hw/arm: Check for CPU types in machine_run_board_init() for various boards
pci-host: designware: Limit value range of iATU viewport register
hw/arm: Convert some DPRINTF macros to trace events and guest errors
hw/arm: NPCM7XX SoC: Add GMAC ethernet controller devices
hw/arm: Implement BCM2835 SPI Controller
# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmW9C84ZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3qS6D/wM0/JGEYfaadpuMEOAx4PG
# AnfScbPqVhx9J31P2Ks3VrB5F108aq/SaL2BmCb3BLF/ECChlhBXIjd7ukdHstts
# F1TvqtvLGDZQz6wSVUeB0YOvAjGa3vIskn+Xvk9e6Ne6PcXgVnxAof/cPsXUiYNy
# 6DJjNiLJ/a9Xgq9rjFO6vzW3AL95U6/FmD2F0pOotWXERhNhoyYVV6RtyeqKlDQP
# yFVk5h601YURk9PeNZn9zpOpZqjAM7PxyF3X50N3Sv+G0uoKSr6b+c3/fDJbJo3+
# 0LXomEa8hdheQxm1dLY5OD0JX3bvYxwH41bDg9B0iEdjxUdXt6LfXI9Nvw9BAwix
# 8AcGJJUaL4XU4uPfHBpRJApM15+MRb0hqfv4ZcGk8e67IIqVeDbKL2clTQGoHSg1
# KaB0POhtFx//M/uBOyk/FR2gb2eBNU8GuoCgxdDwh0K5ylcaK1YPiX4Tcglu4iS0
# Frvazphb2pO1BK6JiJwN2/9ezzDkDJqTKoSqdc4g3ETVOGnxr+tXwcds3t2iK3g2
# y+pgijDOAT3bJO5kYeGvhoEJPKqXwJ3UQ8zTJsU2XSYwBjIyv5V3oOn6elwYJaWq
# yUDTC3QEK61KfnQnfTyLfdGWX1aVzHnYLWmQdO+3cczuQU0s0MP246Z1GAgDtgvD
# jGjDBz6mryWvP2H0xSmERQ==
# =azdP
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 02 Feb 2024 15:35:42 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* tag 'pull-target-arm-20240202' of https://git.linaro.org/people/pmaydell/qemu-arm: (36 commits)
hw/arm: Connect SPI Controller to BCM2835
hw/ssi: Implement BCM2835 SPI Controller
tests/qtest: Adding PCS Module test to GMAC Qtest
hw/net: GMAC Tx Implementation
hw/net: GMAC Rx Implementation
tests/qtest: Creating qtest for GMAC Module
hw/arm: Add GMAC devices to NPCM7XX SoC
hw/net: Add NPCMXXX GMAC device
hw/xen: convert stderr prints to error/warn reports
hw/xen/xen-hvm-common.c: convert DPRINTF to tracepoints
hw/xen/xen-mapcache.c: convert DPRINTF to tracepoints
hw/arm/xen_arm.c: convert DPRINTF to trace events and error/warn reports
hw/arm/z2: convert DPRINTF to trace events and guest errors
hw/arm/strongarm.c: convert DPRINTF to trace events and guest errors
pci-host: designware: Limit value range of iATU viewport register
hw/arm/zynq: Check for CPU types in machine_run_board_init()
hw/arm/vexpress: Check for CPU types in machine_run_board_init()
hw/arm/npcm7xx_boards: Simplify setting MachineClass::valid_cpu_types[]
hw/arm/musca: Simplify setting MachineClass::valid_cpu_types[]
hw/arm/msf2: Simplify setting MachineClass::valid_cpu_types[]
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
This function is no longer used, as all its callers have been converted
to use pci_init_nic_devices() instead.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>
|
|
Create the device only if there is a corresponding NIC config for it.
Remove the explicit check on nd_table[0].used from hw/hppa/machine.c
which (since commit d8a3220005d7) tries to do the same thing.
The lasi_82596 support has been disabled since it was first introduced,
since enable_lasi_lan() has always been zero. This allows the user to
enable it by explicitly requesting a NIC model 'lasi_82596' or just
using the alias 'lasi'. Otherwise, it defaults to a PCI NIC as before.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>
|
|
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>
|
|
Some callers instantiate the device unconditionally, others will do so only
if there is a NICInfo to go with it. This appears to be fairly random, but
preseve the existing behaviour for now.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>
|
|
Some callers instantiate the device unconditionally, others will do so only
if there is a NICInfo to go with it. This appears to be fairly random, but
preserve the existing behaviour of each caller for now.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>
|
|
When instantiating XenBus itself, for each NIC which is configured with
either the model unspecified, or set to to "xen" or "xen-net-device",
create a corresponding xen-net-device for it.
Now we can revert the previous more hackish version which relied on the
platform code explicitly registering the NICs on its own XenBus, having
returned the BusState* from xen_bus_init() itself.
This also fixes the setup for Xen PV guests, which was previously broken
in various ways and never actually managed to peer with the netdev.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
|