| Age | Commit message (Collapse) | Author |
|---|
|
Add the USART to the SoC and connect it to the other implemented devices.
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240329174402.60382-5-arnaud.minier@telecom-paris.fr
[PMM: fixed a few checkpatch nits]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Implement the ability to read and write characters to the
usart using the serial port.
The character transmission is based on the
cmsdk-apb-uart implementation.
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240329174402.60382-3-arnaud.minier@telecom-paris.fr
[PMM: fixed a few checkpatch nits]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Add the basic infrastructure (register read/write, type...)
to implement the STM32L4x5 USART.
Also create different types for the USART, UART and LPUART
of the STM32L4x5 to deduplicate code and enable the
implementation of different behaviors depending on the type.
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240329174402.60382-2-arnaud.minier@telecom-paris.fr
[PMM: update to new reset hold method signature;
fixed a few checkpatch nits]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Some devices and machines need to handle the reset before a vmsave
snapshot is loaded differently -- the main user is the handling of
RNG seed information, which does not want to put a new RNG seed into
a ROM blob when we are doing a snapshot load.
Currently this kind of reset handling is supported only for:
* TYPE_MACHINE reset methods, which take a ShutdownCause argument
* reset functions registered with qemu_register_reset_nosnapshotload
To allow a three-phase-reset device to also distinguish "snapshot
load" reset from the normal kind, add a new ResetType
RESET_TYPE_SNAPSHOT_LOAD. All our existing reset methods ignore
the reset type, so we don't need to update any device code.
Add the enum type, and make qemu_devices_reset() use the
right reset type for the ShutdownCause it is passed. This
allows us to get rid of the device_reset_reason global we
were using to implement qemu_register_reset_nosnapshotload().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Message-id: 20240412160809.1260625-7-peter.maydell@linaro.org
|
|
We pass a ResetType argument to the Resettable class enter
phase method, but we don't pass it to hold and exit, even though
the callsites have it readily available. This means that if
a device cared about the ResetType it would need to record it
in the enter phase method to use later on. Pass the type to
all three of the phase methods to avoid having to do that.
Commit created with
for dir in hw target include; do \
spatch --macro-file scripts/cocci-macro-file.h \
--sp-file scripts/coccinelle/reset-type.cocci \
--keep-comments --smpl-spacing --in-place \
--include-headers --dir $dir; done
and no manual edits.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Message-id: 20240412160809.1260625-5-peter.maydell@linaro.org
|
|
Add the NMIAR CPU interface registers which deal with acknowledging NMI.
When introduce NMI interrupt, there are some updates to the semantics for the
register ICC_IAR1_EL1 and ICC_HPPIR1_EL1. For ICC_IAR1_EL1 register, it
should return 1022 if the intid has non-maskable property. And for
ICC_NMIAR1_EL1 register, it should return 1023 if the intid do not have
non-maskable property. Howerever, these are not necessary for ICC_HPPIR1_EL1
register.
And the APR and RPR has NMI bits which should be handled correctly.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[PMM: Separate out whether cpuif supports NMI from whether the
GIC proper (IRI) supports NMI]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-19-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
A SPI, PPI or SGI interrupt can have non-maskable property. So maintain
non-maskable property in PendingIrq and GICR/GICD. Since add new device
state, it also needs to be migrated, so also save NMI info in
vmstate_gicv3_cpu and vmstate_gicv3.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-16-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Add a property has-nmi to the GICv3 device, and use this to set
the NMI bit in the GICD_TYPER register. This isn't visible to
guests yet because the property defaults to false and we won't
set it in the board code until we've landed all of the changes
needed to implement FEAT_GICV3_NMI.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-14-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Augment the GICv3's QOM device interface by adding one
new set of sysbus IRQ line, to signal NMI to each CPU.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-11-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Commit fd3f7d24d4 ("include/hw/core: Remove i386 conditional
on fake_user_interrupt") remove the need to check on NEED_CPU_H.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240321154838.95771-3-philmd@linaro.org>
|
|
Removal of deprecated code
- Remove the Nios II target and hardware
- Remove pvrdma device and rdmacm-mux helper
- Remove GlusterFS RDMA protocol handling
- Update Sriram Yagnaraman mail address
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmYpE0YACgkQ4+MsLN6t
# wN5PIA//egomANjRHAUAf9tdjljgT/JR49ejM7iInyxspR/xaiq0TlP2kP6aDNps
# y1HAWBwfj5lGxeMgQ1mSKJGka3v2AIPWb7RbNT+9AaiWHv+sx5OrEytozUsFHLo8
# gSgRQocq0NY2a9dPbtkDqfbmq/rkCC7wgZzwroHsyOdiqYsWDKPJFleBDMjGmEaf
# colhiDmhUPgvE3NNpwfEVNh/2SzxUxY8k5FHal6qij5z56ZqBglgnziDZEvGVCZ1
# uF4Hca/kh7TV2MVsdStPbGWZYDhJ/Np/2FnRoThD1Hc4qq8d/SH997m2F94tSOud
# YeH54Vp5lmCeYgba5y8VP0ZPx/b9XnTtLvKggNdoqB+T2LBWPRt8kehqoaxvammF
# ALzbY/t2vUxL6nIVbosOaTyqVOXvynk3/Js5S0jbnlu+vP2WvvFEzfYKIs2DIA8w
# z56o/rG4KfyxF0aDB+CvLNwtJS8THqeivPqmYoKTdN9FPpN2RyBNLITrKo389ygF
# 3oWy3+xsKGIPdNFY0a4l25xntqWNhND89ejzyL9M6G1cQ9RdEmTIUGTrinPQQmfP
# oHIJMBeTdj7EqPL4LB3BR/htw9U5PobeMNYKFsRkS39PjGDqba5wbIdk3w5/Rcxa
# s/PKdspDKWPwZ5jhcLD0qxAGJFnqM2UFjPo+U8qyI3RXKXFAn0E=
# =c8Aj
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 24 Apr 2024 07:12:22 AM PDT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
* tag 'housekeeping-20240424' of https://github.com/philmd/qemu:
block/gluster: Remove deprecated RDMA protocol handling
hw/rdma: Remove deprecated pvrdma device and rdmacm-mux helper
hw/timer: Remove the ALTERA_TIMER model
target/nios2: Remove the deprecated Nios II target
MAINTAINERS: Update Sriram Yagnaraman mail address
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
The whole RDMA subsystem was deprecated in commit e9a54265f5
("hw/rdma: Deprecate the pvrdma device and the rdma subsystem")
released in v8.2.
Remove:
- PVRDMA device
- generated vmw_pvrdma/ directory from linux-headers
- rdmacm-mux tool from contrib/
Cc: Yuval Shaia <yuval.shaia.ml@gmail.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20240328130255.52257-2-philmd@linaro.org>
|
|
The Nios II target is deprecated since v8.2 in commit 9997771bc1
("target/nios2: Deprecate the Nios II architecture").
Remove:
- Buildsys / CI infra
- User emulation
- System emulation (10m50-ghrd & nios2-generic-nommu machines)
- Tests
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Marek Vasut <marex@denx.de>
Message-Id: <20240327144806.11319-3-philmd@linaro.org>
|
|
https://gitlab.com/peterx/qemu into staging
Migration pull for 9.1
- Het's new test cases for "channels"
- Het's fix for a typo for vsock parsing
- Cedric's VFIO error report series
- Cedric's one more patch for dirty-bitmap error reports
- Zhijian's rdma deprecation patch
- Yuan's zeropage optimization to fix double faults on anon mem
- Zhijian's COLO fix on a crash
# -----BEGIN PGP SIGNATURE-----
#
# iIgEABYKADAWIQS5GE3CDMRX2s990ak7X8zN86vXBgUCZig4HxIccGV0ZXJ4QHJl
# ZGhhdC5jb20ACgkQO1/MzfOr1wbQiwD/V5nSJzSuAG4Ra1Fjo+LRG2TT6qk8eNCi
# fIytehSw6cYA/0wqarxOF0tr7ikeyhtG3w4xFf44kk6KcPkoVSl1tqoL
# =pJmQ
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 23 Apr 2024 03:37:19 PM PDT
# gpg: using EDDSA key B9184DC20CC457DACF7DD1A93B5FCCCDF3ABD706
# gpg: issuer "peterx@redhat.com"
# gpg: Good signature from "Peter Xu <xzpeter@gmail.com>" [unknown]
# gpg: aka "Peter Xu <peterx@redhat.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B918 4DC2 0CC4 57DA CF7D D1A9 3B5F CCCD F3AB D706
* tag 'migration-20240423-pull-request' of https://gitlab.com/peterx/qemu: (26 commits)
migration/colo: Fix bdrv_graph_rdlock_main_loop: Assertion `!qemu_in_coroutine()' failed.
migration/multifd: solve zero page causing multiple page faults
migration: Add Error** argument to add_bitmaps_to_list()
migration: Modify ram_init_bitmaps() to report dirty tracking errors
migration: Add Error** argument to xbzrle_init()
migration: Add Error** argument to ram_state_init()
memory: Add Error** argument to the global_dirty_log routines
migration: Introduce ram_bitmaps_destroy()
memory: Add Error** argument to .log_global_start() handler
migration: Add Error** argument to .load_setup() handler
migration: Add Error** argument to .save_setup() handler
migration: Add Error** argument to qemu_savevm_state_setup()
migration: Add Error** argument to vmstate_save()
migration: Always report an error in ram_save_setup()
migration: Always report an error in block_save_setup()
vfio: Always report an error in vfio_save_setup()
s390/stattrib: Add Error** argument to set_migrationmode() handler
tests/qtest/migration: Fix typo for vsock in SocketAddress_to_str
tests/qtest/migration: Add negative tests to validate migration QAPIs
tests/qtest/migration: Add multifd_tcp_plain test using list of channels instead of uri
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
This will prepare ground for future changes adding an Error** argument
to the save_setup() handler. We need to make sure that on failure,
set_migrationmode() always sets a new error. See the Rules section in
qapi/error.h.
Cc: Halil Pasic <pasic@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Thomas Huth <thuth@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/r/20240320064911.545001-2-clg@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
|
|
Add a new member "guest_memfd" to memory backends. When it's set
to true, it enables RAM_GUEST_MEMFD in ram_flags, thus private kvm
guest_memfd will be allocated during RAMBlock allocation.
Memory backend's @guest_memfd is wired with @require_guest_memfd
field of MachineState. It avoid looking up the machine in phymem.c.
MachineState::require_guest_memfd is supposed to be set by any VMs
that requires KVM guest memfd as private memory, e.g., TDX VM.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-ID: <20240320083945.991426-8-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Use the unified interface to call confidential guest related kvm_init()
and kvm_reset(), to avoid exposing pef specific functions.
As a bonus, pef.h goes away since there is no direct call from sPAPR
board code to PEF code anymore.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add a q35 property to check whether or not SMM ranges, e.g. SMRAM, TSEG,
etc... exist for the target platform. TDX doesn't support SMM and doesn't
play nice with QEMU modifying related guest memory ranges.
Signed-off-by: Isaku Yamahata <isaku.yamahata@linux.intel.com>
Co-developed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Message-ID: <20240320083945.991426-19-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add 9.1 machine types for arm/i440fx/m68k/q35/s390x/spapr.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Cc: Gavin Shan <gshan@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Introduce virtio_bh_new_guarded(), similar to qemu_bh_new_guarded()
but using the transport memory guard, instead of the device one
(there can only be one virtio device per virtio bus).
Inspired-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20240409105537.18308-2-philmd@linaro.org>
|
|
The current handling of invalid virtqueue elements inside the TX/RX virt
queue handlers is wrong.
They are added in a per-stream invalid queue to be processed after the
handler is done examining each message, but the invalid message might
not be specifying any stream_id; which means it's invalid to add it to
any stream->invalid queue since stream could be NULL at this point.
This commit moves the invalid queue to the VirtIOSound struct which
guarantees there will always be a valid temporary place to store them
inside the tx/rx handlers. The queue will be emptied before the handler
returns, so the queue must be empty at any other point of the device's
lifetime.
Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-Id: <virtio-snd-rewrite-invalid-tx-rx-message-handling-v1.manos.pitsidianakis@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
This reverts commit cd341fd1ffded978b2aa0b5309b00be7c42e347c.
The patch adds non-upstream code in
include/standard-headers/linux/virtio_pci.h
which would make maintainance harder.
Revert for now.
Suggested-by: Jason Wang <jasowang@redhat.com>
Message-Id: <df6b6b465753e754a19459e8cd61416548f89a42.1712569644.git.mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Let clock_set_mul_div() return a boolean value whether the
clock has been updated or not, similarly to clock_set().
Return early when clock_set_mul_div() is called with
same mul/div values the clock has.
Acked-by: Luc Michel <luc@lmichel.fr>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20240325152827.73817-2-philmd@linaro.org>
|
|
The PCA9552 and PCA9554 devices are both I2C GPIO controllers and the
PCA9552 also can drive LEDs. Do all the necessary adjustments to move
the models under hw/gpio.
Cc: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Message-ID: <20240325134833.1484265-1-clg@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
staging
aspeed, pnv, vfio queue:
* user device fixes for Aspeed and PowerNV machines
* coverity fix for iommufd
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmX5mm0ACgkQUaNDx8/7
# 7KE/MQ/9GeX4yNBxY2iTATdmPXwjMw8AtKyfIQb605nIO0ch1Z98ywl5VMwCNohn
# ppY9L5bFpEASgRlFVm73X4DGxKyRGpRPqylsvINh0hKciRpmRkELHY3llhnXsd7P
# Q197pDtFr54FeX8j4+hSAu4paT97fPENlKn0J6lto2I1cXGcD1LYNDFhysoXdGme
# brJgo7KjQJZPZ560ZewskL5FWf3G9EkRjpqd8y0G5OtNmAPgAaahOMHhDCXan182
# J89I9CHI5xN45MRfAs8JamSaj/GyNsr4h04WhPa0+VZQ5vsaeW2Ekt4ypj+oAV+p
# wykhYzQk4ALZcmmph2flSAtLa7uheI+imyqubMthQCDj3G8onSQBMd5/4WRK6O49
# 0oE1DpPDEfhlJEQYxaYhOeqeA9iaP+w6V+yE+L5oGlMO66cR7GZsPu0x7kXailbH
# IoHw9mO+vMkpuyeP7M3hA8WRFCdFpf1Nn1Ao5Jz3KoiTyJWlIvX5VSaj12sjddQ2
# fU9SKu2Q5QqS5uQGakkY64EyUy7RkGIX6zY2NIscVe2lfAfKf3mZwu7OIuLjEy5O
# lRn35vWV8fOdRooKoDPTNcdBCaNPi+RApin8chOv5P+F+ie7+Twf9sb1AgH/pIcv
# HptvTXbvSFNbbdb+OE8a5qsqTvnrN8d31IXzrWRYsJB07x2IyoA=
# =zR3v
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 19 Mar 2024 14:00:13 GMT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-for-9.0-20240319' of https://github.com/legoater/qemu:
aspeed/smc: Only wire flash devices at reset
ppc/pnv: I2C controller is not user creatable
vfio/iommufd: Fix memory leak
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
The Aspeed machines have many Static Memory Controllers (SMC), up to
8, which can only drive flash memory devices. Commit 27a2c66c92ec
("aspeed/smc: Wire CS lines at reset") tried to ease the definitions
of these devices by allowing flash devices from the command line to be
attached to a SSI bus. For that, the wiring of the CS lines of the
Aspeed SMC controller was moved at reset. Two assumptions are made
though, first that the device has a SSI_GPIO_CS GPIO line, which is
not always the case, and second that it is a flash device.
Correct this problem by ensuring that the devices attached to the bus
are of the correct flash type. This fixes a QEMU abort when devices
without a CS line, such as the max111x, are passed on the command
line.
While at it, export TYPE_M25P80 used in the Xilinx Versal Virtual
machine.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2228
Fixes: 27a2c66c92ec ("aspeed/smc: Wire CS lines at reset")
Reported-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
[ clg: minor fixes in the commit log ]
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Message-Id: <20240314152302.2324164-14-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Current code uses mix of error_report()+exit(1)
and error_setg() to handle errors.
Use newer error_setg() everywhere, beside consistency
it will allow to detect error condition without killing
QEMU and attempt switch-over to SMBIOS3.x tables/entrypoint
in follow up patch.
while at it, clear smbios_tables pointer after freeing.
that will avoid double free if smbios_get_tables() is called
multiple times.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Message-Id: <20240314152302.2324164-13-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
basically moving code around without functional change.
And exposing some symbols so that they could be shared
between smbbios.c and new smbios_legacy.c
plus some meson magic to build smbios_legacy.c only
for 'pc' machine and otherwise replace it with stub
if not selected.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Message-Id: <20240314152302.2324164-12-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
As a preparation to move legacy handling into a separate file,
add prefix 'smbios_' to type0/type1/have_binfile_bitmap/have_fields_bitmap
and expose them in smbios.h so that they can be reused in
legacy and modern code.
Doing it as a separate patch to avoid rename cluttering follow-up
patch which will move legacy code into a separate file.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Message-Id: <20240314152302.2324164-11-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
legacy mode doesn't support structures of type 2 and more,
and CLI has a check for '-smbios type' option, however it's
still possible to sneak in type4 as a blob with '-smbios file'
option. However doing the later makes SMBIOS tables broken
since SeaBIOS doesn't expect that.
Rather than trying to add support for type4 to legacy code
(both QEMU and SeaBIOS), simplify smbios_get_table_legacy()
by dropping not relevant check in legacy code and error out
on type4 blob.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Message-Id: <20240314152302.2324164-9-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
clean up smbios_set_defaults() which is reused by legacy
and non legacy machines from being aware of 'legacy' notion
and need to turn it off. And push legacy handling up to
PC machine code where it's relevant.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Acked-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Message-Id: <20240314152302.2324164-7-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
it makes smbios_validate_table() independent from
smbios_smp_sockets global, which in turn lets
smbios_get_tables() avoid using not related legacy code.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Message-Id: <20240314152302.2324164-6-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
into staging
virtio,pc,pci: features, cleanups, fixes
more memslots support in libvhost-user
support PCIe Gen5/Gen6 link speeds in pcie
more traces in vdpa
network simulation devices support in vdpa
SMBIOS type 9 descriptor implementation
Bump max_cpus to 4096 vcpus in q35
aw-bits and granule options in VIRTIO-IOMMU
Support report NUMA nodes for device memory using GI in acpi
Beginning of shutdown event support in pvpanic
fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmXw0TMPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRp8x4H+gLMoGwaGAX7gDGPgn2Ix4j/3kO77ZJ9X9k/
# 1KqZu/9eMS1j2Ei+vZqf05w7qRjxxhwDq3ilEXF/+UFqgAehLqpRRB8j5inqvzYt
# +jv0DbL11PBp/oFjWcytm5CbiVsvq8KlqCF29VNzc162XdtcduUOWagL96y8lJfZ
# uPrOoyeR7SMH9lp3LLLHWgu+9W4nOS03RroZ6Umj40y5B7yR0Rrppz8lMw5AoQtr
# 0gMRnFhYXeiW6CXdz+Tzcr7XfvkkYDi/j7ibiNSURLBfOpZa6Y8+kJGKxz5H1K1G
# 6ZY4PBcOpQzl+NMrktPHogczgJgOK10t+1i/R3bGZYw2Qn/93Eg=
# =C0UU
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 12 Mar 2024 22:03:31 GMT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (68 commits)
docs/specs/pvpanic: document shutdown event
hw/cxl: Fix missing reserved data in CXL Device DVSEC
hmat acpi: Fix out of bounds access due to missing use of indirection
hmat acpi: Do not add Memory Proximity Domain Attributes Structure targetting non existent memory.
qemu-options.hx: Document the virtio-iommu-pci aw-bits option
hw/arm/virt: Set virtio-iommu aw-bits default value to 48
hw/i386/q35: Set virtio-iommu aw-bits default value to 39
virtio-iommu: Add an option to define the input range width
virtio-iommu: Trace domain range limits as unsigned int
qemu-options.hx: Document the virtio-iommu-pci granule option
virtio-iommu: Change the default granule to the host page size
virtio-iommu: Add a granule property
hw/i386/acpi-build: Add support for SRAT Generic Initiator structures
hw/acpi: Implement the SRAT GI affinity structure
qom: new object to associate device to NUMA node
hw/i386/pc: Inline pc_cmos_init() into pc_cmos_init_late() and remove it
hw/i386/pc: Set "normal" boot device order in pc_basic_device_init()
hw/i386/pc: Avoid one use of the current_machine global
hw/i386/pc: Remove "rtc_state" link again
Revert "hw/i386/pc: Confine system flash handling to pc_sysfw"
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# hw/core/machine.c
|
|
into staging
* PAPR nested hypervisor host implementation for spapr TCG
* excp_helper.c code cleanups and improvements
* Move more ops to decodetree
* Deprecate pseries-2.12 machines and P9 and P10 DD1.0 CPUs
* Document running Linux on AmigaNG
* Update dt feature advertising POWER CPUs.
* Add P10 PMU SPRs
* Improve pnv topology calculation for SMT8 CPUs.
* Various bug fixes.
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCgAdFiEETkN92lZhb0MpsKeVZ7MCdqhiHK4FAmXwiT8ACgkQZ7MCdqhi
# HK7C/w//XxEO2bQTFPLFDTrP/voq7pcX8XeQNVyXCkXYjvsbu05oQow50k+Y5UAE
# US4MFjt8jFz0vuIKuKyoA3kG41zDSOzoX4TQXMM+tyTWbuFF3KAyfizb1xE6SYAN
# xJEGvmiXv/EgoSBD7BTKQp1tMPdIGZLwSdYiA0lmOo7YaMCgYAXaujW5hnNjQecT
# 873sN+10pHtQY++mINtD9Nfb6AcDGMWw0b+bykqIXhNRkI8IGOS4WF4vAuMBrwfe
# UM00wDnNRb86Dk14bv2XVNDr6/i0VRtUMwM4yiptrQ1TQx18LZaPSQFYjQfPaan7
# LwN4QkMFnBX54yJ7Npvjvu8BCBF47kwOVu4CIAFJ4sIm0WfTmozDpPttwcZ5w7Ve
# iXDOB9ECAB4pQ2rCgbSNG8MYUZgoHHOuThqolOP0Vh9NHRRJxpdw6CyAbmCGftc0
# lvRDPFiKp8xmCNJ/j3XzoUdHoG7NMwpUmHv9ruGU18SdQ8hyJN9AcQGWYrB4v0RV
# /hs2RAbwntG7ahkcwd8uy5aFw88Wph/uGXPXc49EWj7i49vHeIV2y5+gtthMywje
# qqjFXkistXuF+JHVnyoYmqqCyXaHX5CEwtawMv4EQeaJs76bLhMeMTKKl9rRp8qB
# DtbIZphO8iMsocrBnje48sA5HR0PM+H4HTjw10i8R0fLlWitaIY=
# =XnY5
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 12 Mar 2024 16:56:31 GMT
# gpg: using RSA key 4E437DDA56616F4329B0A79567B30276A8621CAE
# gpg: Good signature from "Nicholas Piggin <npiggin@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4E43 7DDA 5661 6F43 29B0 A795 67B3 0276 A862 1CAE
* tag 'pull-ppc-for-9.0-2-20240313' of https://gitlab.com/npiggin/qemu: (38 commits)
spapr: nested: Introduce cap-nested-papr for Nested PAPR API
spapr: nested: Introduce H_GUEST_RUN_VCPU hcall.
spapr: nested: Use correct source for parttbl info for nested PAPR API.
spapr: nested: Introduce H_GUEST_[GET|SET]_STATE hcalls.
spapr: nested: Initialize the GSB elements lookup table.
spapr: nested: Extend nested_ppc_state for nested PAPR API
spapr: nested: Introduce H_GUEST_CREATE_VCPU hcall.
spapr: nested: Introduce H_GUEST_[CREATE|DELETE] hcalls.
spapr: nested: Introduce H_GUEST_[GET|SET]_CAPABILITIES hcalls.
spapr: nested: Document Nested PAPR API
spapr: nested: keep nested-hv related code restricted to its API.
spapr: nested: Introduce SpaprMachineStateNested to store related info.
spapr: nested: move nested part of spapr_get_pate into spapr_nested.c
spapr: nested: register nested-hv api hcalls only for cap-nested-hv
target/ppc: Remove interrupt handler wrapper functions
target/ppc: Clean up ifdefs in excp_helper.c, part 3
target/ppc: Clean up ifdefs in excp_helper.c, part 2
target/ppc: Clean up ifdefs in excp_helper.c, part 1
target/ppc: Add gen_exception_err_nip() function
target/ppc: Readability improvements in exception handlers
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
The r3.1 specification introduced a new 2 byte field, but
to maintain DWORD alignment, a additional 2 reserved bytes
were added. Forgot those in updating the structure definition
but did include them in the size define leading to a buffer
overrun.
Also use the define so that we don't duplicate the value.
Fixes: Coverity ID 1534095 buffer overrun
Fixes: 8700ee15de ("hw/cxl: Standardize all references on CXL r3.1 and minor updates")
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240308143831.6256-1-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
aw-bits is a new option that allows to set the bit width of
the input address range. This value will be used as a default for
the device config input_range.end. By default it is set to 64 bits
which is the current value.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240307134445.92296-7-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
This allows to choose which granule will be used by
default by the virtio-iommu. Current page size mask
default is qemu_target_page_mask so this translates
into a 4k granule on ARM and x86_64 where virtio-iommu
is supported.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Message-Id: <20240307134445.92296-3-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
ACPI spec provides a scheme to associate "Generic Initiators" [1]
(e.g. heterogeneous processors and accelerators, GPUs, and I/O devices with
integrated compute or DMA engines GPUs) with Proximity Domains. This is
achieved using Generic Initiator Affinity Structure in SRAT. During bootup,
Linux kernel parse the ACPI SRAT to determine the PXM ids and create a NUMA
node for each unique PXM ID encountered. Qemu currently do not implement
these structures while building SRAT.
Add GI structures while building VM ACPI SRAT. The association between
device and node are stored using acpi-generic-initiator object. Lookup
presence of all such objects and use them to build these structures.
The structure needs a PCI device handle [2] that consists of the device BDF.
The vfio-pci device corresponding to the acpi-generic-initiator object is
located to determine the BDF.
[1] ACPI Spec 6.3, Section 5.2.16.6
[2] ACPI Spec 6.3, Table 5.80
Cc: Jonathan Cameron <qemu-devel@nongnu.org>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Cedric Le Goater <clg@redhat.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Ankit Agrawal <ankita@nvidia.com>
Message-Id: <20240308145525.10886-3-ankita@nvidia.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
NVIDIA GPU's support MIG (Mult-Instance GPUs) feature [1], which allows
partitioning of the GPU device resources (including device memory) into
several (upto 8) isolated instances. Each of the partitioned memory needs
a dedicated NUMA node to operate. The partitions are not fixed and they
can be created/deleted at runtime.
Unfortunately Linux OS does not provide a means to dynamically create/destroy
NUMA nodes and such feature implementation is not expected to be trivial. The
nodes that OS discovers at the boot time while parsing SRAT remains fixed. So
we utilize the Generic Initiator (GI) Affinity structures that allows
association between nodes and devices. Multiple GI structures per BDF is
possible, allowing creation of multiple nodes by exposing unique PXM in each
of these structures.
Implement the mechanism to build the GI affinity structures as Qemu currently
does not. Introduce a new acpi-generic-initiator object to allow host admin
link a device with an associated NUMA node. Qemu maintains this association
and use this object to build the requisite GI Affinity Structure.
When multiple NUMA nodes are associated with a device, it is required to
create those many number of acpi-generic-initiator objects, each representing
a unique device:node association.
Following is one of a decoded GI affinity structure in VM ACPI SRAT.
[0C8h 0200 1] Subtable Type : 05 [Generic Initiator Affinity]
[0C9h 0201 1] Length : 20
[0CAh 0202 1] Reserved1 : 00
[0CBh 0203 1] Device Handle Type : 01
[0CCh 0204 4] Proximity Domain : 00000007
[0D0h 0208 16] Device Handle : 00 00 20 00 00 00 00 00 00 00 00
00 00 00 00 00
[0E0h 0224 4] Flags (decoded below) : 00000001
Enabled : 1
[0E4h 0228 4] Reserved2 : 00000000
[0E8h 0232 1] Subtable Type : 05 [Generic Initiator Affinity]
[0E9h 0233 1] Length : 20
An admin can provide a range of acpi-generic-initiator objects, each
associating a device (by providing the id through pci-dev argument)
to the desired NUMA node (using the node argument). Currently, only PCI
device is supported.
For the grace hopper system, create a range of 8 nodes and associate that
with the device using the acpi-generic-initiator object. While a configuration
of less than 8 nodes per device is allowed, such configuration will prevent
utilization of the feature to the fullest. The following sample creates 8
nodes per PCI device for a VM with 2 PCI devices and link them to the
respecitve PCI device using acpi-generic-initiator objects:
-numa node,nodeid=2 -numa node,nodeid=3 -numa node,nodeid=4 \
-numa node,nodeid=5 -numa node,nodeid=6 -numa node,nodeid=7 \
-numa node,nodeid=8 -numa node,nodeid=9 \
-device vfio-pci-nohotplug,host=0009:01:00.0,bus=pcie.0,addr=04.0,rombar=0,id=dev0 \
-object acpi-generic-initiator,id=gi0,pci-dev=dev0,node=2 \
-object acpi-generic-initiator,id=gi1,pci-dev=dev0,node=3 \
-object acpi-generic-initiator,id=gi2,pci-dev=dev0,node=4 \
-object acpi-generic-initiator,id=gi3,pci-dev=dev0,node=5 \
-object acpi-generic-initiator,id=gi4,pci-dev=dev0,node=6 \
-object acpi-generic-initiator,id=gi5,pci-dev=dev0,node=7 \
-object acpi-generic-initiator,id=gi6,pci-dev=dev0,node=8 \
-object acpi-generic-initiator,id=gi7,pci-dev=dev0,node=9 \
-numa node,nodeid=10 -numa node,nodeid=11 -numa node,nodeid=12 \
-numa node,nodeid=13 -numa node,nodeid=14 -numa node,nodeid=15 \
-numa node,nodeid=16 -numa node,nodeid=17 \
-device vfio-pci-nohotplug,host=0009:01:01.0,bus=pcie.0,addr=05.0,rombar=0,id=dev1 \
-object acpi-generic-initiator,id=gi8,pci-dev=dev1,node=10 \
-object acpi-generic-initiator,id=gi9,pci-dev=dev1,node=11 \
-object acpi-generic-initiator,id=gi10,pci-dev=dev1,node=12 \
-object acpi-generic-initiator,id=gi11,pci-dev=dev1,node=13 \
-object acpi-generic-initiator,id=gi12,pci-dev=dev1,node=14 \
-object acpi-generic-initiator,id=gi13,pci-dev=dev1,node=15 \
-object acpi-generic-initiator,id=gi14,pci-dev=dev1,node=16 \
-object acpi-generic-initiator,id=gi15,pci-dev=dev1,node=17 \
Link: https://www.nvidia.com/en-in/technologies/multi-instance-gpu [1]
Cc: Jonathan Cameron <qemu-devel@nongnu.org>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Ankit Agrawal <ankita@nvidia.com>
Message-Id: <20240308145525.10886-2-ankita@nvidia.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Now that pc_cmos_init() doesn't populate the X86MachineState::rtc attribute any
longer, its duties can be merged into pc_cmos_init_late() which is called within
machine_done notifier. This frees pc_piix and pc_q35 from explicit CMOS
initialization.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20240303185332.1408-5-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Specifying the property `-M pflash0` results in a regression:
qemu-system-x86_64: Property 'pc-q35-9.0-machine.pflash0' not found
Revert the change for now until a solution is found.
This reverts commit 6f6ad2b24582593d8feb00434ce2396840666227.
Reported-by: Volker Rümelin <vr_qemu@t-online.de>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20240226215909.30884-3-shentey@gmail.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
pcie_sriov_pf_disable_vfs() is called when resetting the PF, but it only
disables VFs and does not reset SR-IOV extended capability, leaking the
state and making the VF Enable register inconsistent with the actual
state.
Replace pcie_sriov_pf_disable_vfs() with pcie_sriov_pf_reset(), which
does not only disable VFs but also resets the capability.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240228-reuse-v8-3-282660281e60@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Sriram Yagnaraman <sriram.yagnaraman@ericsson.com>
|
|
Signed-off-by: Felix Wu <flwu@google.com>
Signed-off-by: Nabih Estefan <nabihestefan@google.com>
Message-Id: <20240221170027.1027325-3-nabihestefan@google.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Version 2.1+.
Signed-off-by: Felix Wu <flwu@google.com>
Signed-off-by: Nabih Estefan <nabihestefan@google.com>
Message-Id: <20240221170027.1027325-2-nabihestefan@google.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
This patch adds support for VDPA network simulation devices.
The device is developed based on virtio-net and tap backend,
and supports hardware live migration function.
For more details, please refer to "docs/system/devices/vdpa-net.rst"
Signed-off-by: Hao Chen <chenh@yusur.tech>
Message-Id: <20240221073802.2888022-1-chenh@yusur.tech>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The payload size returned by command VIRTIO_SND_R_PCM_INFO is
wrong. The code in process_cmd() assumes that all commands
return only a virtio_snd_hdr payload, but some commands like
VIRTIO_SND_R_PCM_INFO may return an additional payload.
Add a zero initialized payload_size variable to struct
virtio_snd_ctrl_command to allow for additional payloads.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20240218083351.8524-1-vr_qemu@t-online.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
This CXL component isn't allowed to have a RAS capability.
Whilst this should be harmless as software is not expected to look
here, good to clean it up.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240215155206.2736-1-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
This patch extends the PCIe link speed option so that slots can be
configured as supporting 32GT/s (Gen5) or 64GT/s (Gen5) speeds.
This is as simple as setting the appropriate bit in LnkCap2 and
the appropriate value in LnkCap and LnkCtl2.
Signed-off-by: Lukas Stockner <lstockner@genesiscloud.com>
Message-Id: <20240215012326.3272366-1-lstockner@genesiscloud.com>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Will be used in following patches.
DISABLING(-1) means SVQ is being switched off to passthrough
mode.
ENABLING(1) means passthrough VQs are being switched to SVQ.
DONE(0) means SVQ switching is completed.
Message-Id: <1707910082-10243-11-git-send-email-si-wei.liu@oracle.com>
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
