aboutsummaryrefslogtreecommitdiff
path: root/include/hw
AgeCommit message (Collapse)Author
2020-05-15qdev: Unrealize must not failMarkus Armbruster
Devices may have component devices and buses. Device realization may fail. Realization is recursive: a device's realize() method realizes its components, and device_set_realized() realizes its buses (which should in turn realize the devices on that bus, except bus_set_realized() doesn't implement that, yet). When realization of a component or bus fails, we need to roll back: unrealize everything we realized so far. If any of these unrealizes failed, the device would be left in an inconsistent state. Must not happen. device_set_realized() lets it happen: it ignores errors in the roll back code starting at label child_realize_fail. Since realization is recursive, unrealization must be recursive, too. But how could a partly failed unrealize be rolled back? We'd have to re-realize, which can fail. This design is fundamentally broken. device_set_realized() does not roll back at all. Instead, it keeps unrealizing, ignoring further errors. It can screw up even for a device with no buses: if the lone dc->unrealize() fails, it still unregisters vmstate, and calls listeners' unrealize() callback. bus_set_realized() does not roll back either. Instead, it stops unrealizing. Fortunately, no unrealize method can fail, as we'll see below. To fix the design error, drop parameter @errp from all the unrealize methods. Any unrealize method that uses @errp now needs an update. This leads us to unrealize() methods that can fail. Merely passing it to another unrealize method cannot cause failure, though. Here are the ones that do other things with @errp: * virtio_serial_device_unrealize() Fails when qbus_set_hotplug_handler() fails, but still does all the other work. On failure, the device would stay realized with its resources completely gone. Oops. Can't happen, because qbus_set_hotplug_handler() can't actually fail here. Pass &error_abort to qbus_set_hotplug_handler() instead. * hw/ppc/spapr_drc.c's unrealize() Fails when object_property_del() fails, but all the other work is already done. On failure, the device would stay realized with its vmstate registration gone. Oops. Can't happen, because object_property_del() can't actually fail here. Pass &error_abort to object_property_del() instead. * spapr_phb_unrealize() Fails and bails out when remove_drcs() fails, but other work is already done. On failure, the device would stay realized with some of its resources gone. Oops. remove_drcs() fails only when chassis_from_bus()'s object_property_get_uint() fails, and it can't here. Pass &error_abort to remove_drcs() instead. Therefore, no unrealize method can fail before this patch. device_set_realized()'s recursive unrealization via bus uses object_property_set_bool(). Can't drop @errp there, so pass &error_abort. We similarly unrealize with object_property_set_bool() elsewhere, always ignoring errors. Pass &error_abort instead. Several unrealize methods no longer handle errors from other unrealize methods: virtio_9p_device_unrealize(), virtio_input_device_unrealize(), scsi_qdev_unrealize(), ... Much of the deleted error handling looks wrong anyway. One unrealize methods no longer ignore such errors: usb_ehci_pci_exit(). Several realize methods no longer ignore errors when rolling back: v9fs_device_realize_common(), pci_qdev_unrealize(), spapr_phb_realize(), usb_qdev_realize(), vfio_ccw_realize(), virtio_device_realize(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-17-armbru@redhat.com>
2020-05-15Drop more @errp parameters after previous commitMarkus Armbruster
Several functions can't fail anymore: ich9_pm_add_properties(), device_add_bootindex_property(), ppc_compat_add_property(), spapr_caps_add_properties(), PropertyInfo.create(). Drop their @errp parameter. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-16-armbru@redhat.com>
2020-05-14Merge remote-tracking branch ↵Peter Maydell
'remotes/pmaydell/tags/pull-target-arm-20200514' into staging target-arm queue: * target/arm: Use correct GDB XML for M-profile cores * target/arm: Code cleanup to use gvec APIs better * aspeed: Add support for the sonorapass-bmc board * target/arm: Support reporting KVM host memory errors to the guest via ACPI notifications * target/arm: Finish conversion of Neon 3-reg-same insns to decodetree # gpg: Signature made Thu 14 May 2020 15:19:15 BST # gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE # gpg: issuer "peter.maydell@linaro.org" # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate] # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * remotes/pmaydell/tags/pull-target-arm-20200514: (45 commits) target/arm: Convert NEON VFMA, VFMS 3-reg-same insns to decodetree target/arm: Convert Neon fp VMAX/VMIN/VMAXNM/VMINNM/VRECPS/VRSQRTS to decodetree target/arm: Move 'env' argument of recps_f32 and rsqrts_f32 helpers to usual place target/arm: Convert Neon 3-reg-same compare insns to decodetree target/arm: Convert Neon fp VMUL, VMLA, VMLS 3-reg-same insns to decodetree target/arm: Convert Neon VPMIN/VPMAX/VPADD float 3-reg-same insns to decodetree target/arm: Convert Neon VADD, VSUB, VABD 3-reg-same insns to decodetree target/arm: Convert Neon VQDMULH/VQRDMULH 3-reg-same to decodetree target/arm: Convert Neon VPADD 3-reg-same insns to decodetree target/arm: Convert Neon VPMAX/VPMIN 3-reg-same insns to decodetree target/arm: Convert Neon VQSHL, VRSHL, VQRSHL 3-reg-same insns to decodetree target/arm: Convert Neon VRHADD, VHSUB 3-reg-same insns to decodetree target/arm: Convert Neon VABA/VABD 3-reg-same to decodetree target/arm: Convert Neon VHADD 3-reg-same insns target/arm: Convert Neon 64-bit element 3-reg-same insns target/arm: Convert Neon 3-reg-same SHA to decodetree target/arm: Convert Neon 3-reg-same VQRDMLAH/VQRDMLSH to decodetree MAINTAINERS: Add ACPI/HEST/GHES entries target-arm: kvm64: handle SIGBUS signal from kernel or KVM ACPI: Record Generic Error Status Block(GESB) table ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-14ACPI: Record Generic Error Status Block(GESB) tableDongjiu Geng
kvm_arch_on_sigbus_vcpu() error injection uses source_id as index in etc/hardware_errors to find out Error Status Data Block entry corresponding to error source. So supported source_id values should be assigned here and not be changed afterwards to make sure that guest will write error into expected Error Status Data Block. Before QEMU writes a new error to ACPI table, it will check whether previous error has been acknowledged. If not acknowledged, the new errors will be ignored and not be recorded. For the errors section type, QEMU simulate it to memory section error. Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com> Signed-off-by: Xiang Zheng <zhengxiang9@huawei.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20200512030609.19593-9-gengdongjiu@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-14ACPI: Record the Generic Error Status Block addressDongjiu Geng
Record the GHEB address via fw_cfg file, when recording a error to CPER, it will use this address to find out Generic Error Data Entries and write the error. In order to avoid migration failure, make hardware error table address to a part of GED device instead of global variable, then this address will be migrated to target QEMU. Acked-by: Xiang Zheng <zhengxiang9@huawei.com> Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20200512030609.19593-7-gengdongjiu@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-14ACPI: Build Hardware Error Source TableDongjiu Geng
This patch builds Hardware Error Source Table(HEST) via fw_cfg blobs. Now it only supports ARMv8 SEA, a type of Generic Hardware Error Source version 2(GHESv2) error source. Afterwards, we can extend the supported types if needed. For the CPER section, currently it is memory section because kernel mainly wants userspace to handle the memory errors. This patch follows the spec ACPI 6.2 to build the Hardware Error Source table. For more detailed information, please refer to document: docs/specs/acpi_hest_ghes.rst build_ghes_hw_error_notification() helper will help to add Hardware Error Notification to ACPI tables without using packed C structures and avoid endianness issues as API doesn't need explicit conversion. Signed-off-by: Xiang Zheng <zhengxiang9@huawei.com> Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20200512030609.19593-6-gengdongjiu@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-14ACPI: Build related register address fields via hardware error fw_cfg blobDongjiu Geng
This patch builds error_block_address and read_ack_register fields in hardware errors table , the error_block_address points to Generic Error Status Block(GESB) via bios_linker. The max size for one GESB is 1kb, For more detailed information, please refer to document: docs/specs/acpi_hest_ghes.rst Now we only support one Error source, if necessary, we can extend to support more. Suggested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Xiang Zheng <zhengxiang9@huawei.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20200512030609.19593-5-gengdongjiu@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-14hw/arm/virt: Introduce a RAS machine optionDongjiu Geng
RAS Virtualization feature is not supported now, so add a RAS machine option and disable it by default. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com> Signed-off-by: Xiang Zheng <zhengxiang9@huawei.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-id: 20200512030609.19593-3-gengdongjiu@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-14hw/core: stream: Add an end-of-packet flagEdgar E. Iglesias
Some stream clients stream an endless stream of data while other clients stream data in packets. Stream interfaces usually have a way to signal the end of a packet or the last beat of a transfer. This adds an end-of-packet flag to the push interface. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-Id: <20200506082513.18751-6-edgar.iglesias@gmail.com>
2020-05-11exec: Add block comments for watchpoint routinesRichard Henderson
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200508154359.7494-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-11hw/timer/nrf51_timer: Display timer ID in trace eventsPhilippe Mathieu-Daudé
The NRF51 series SoC have 3 timer peripherals, each having 4 counters. To help differentiate which peripheral is accessed, display the timer ID in the trace events. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200504072822.18799-4-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-11hw/arm/nrf51: Add NRF51_PERIPHERAL_SIZE definitionPhilippe Mathieu-Daudé
On the NRF51 series, all peripherals have a fixed I/O size of 4KiB. Define NRF51_PERIPHERAL_SIZE and use it. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200504072822.18799-2-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-11aspeed: Support AST2600A1 silicon revisionJoel Stanley
There are minimal differences from Qemu's point of view between the A0 and A1 silicon revisions. As the A1 exercises different code paths in u-boot it is desirable to emulate that instead. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-id: 20200504093703.261135-1-joel@jms.id.au Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-07Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-5.1-20200507' ↵Peter Maydell
into staging ppc patch queue for 2020-04-07 First pull request for qemu-5.1. This includes: * Removal of all remaining cases where we had CAS triggered reboots * A number of improvements to NMI injection * Support for partition scoped radix translation in softmmu * Some fixes for NVDIMM handling * A handful of other minor fixes # gpg: Signature made Thu 07 May 2020 06:00:55 BST # gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392 # gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full] # gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full] # gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full] # gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown] # Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392 * remotes/dgibson/tags/ppc-for-5.1-20200507: target-ppc: fix rlwimi, rlwinm, rlwnm for Clang-9 spapr_nvdimm: Tweak error messages spapr_nvdimm.c: make 'label-size' mandatory target/ppc: Add support for Radix partition-scoped translation target/ppc: Rework ppc_radix64_walk_tree() for partition-scoped translation target/ppc: Extend ppc_radix64_check_prot() with a 'partition_scoped' bool target/ppc: Introduce ppc_radix64_xlate() for Radix tree translation spapr: Don't allow unplug of NVLink2 devices target/ppc: Assert if HV mode is set when running under a pseries machine target/ppc: Introduce a relocation bool in ppc_radix64_handle_mmu_fault() target/ppc: Enforce that the root page directory size must be at least 5 spapr: Drop CAS reboot flag spapr/cas: Separate CAS handling from rebuilding the FDT spapr: Simplify selection of radix/hash during CAS ppc/pnv: Add support for NMI interface ppc/spapr: tweak change system reset helper spapr: Don't check capabilities removed between CAS calls target/ppc: Improve syscall exception logging Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-07spapr: Drop CAS reboot flagGreg Kurz
The CAS reboot flag is false by default and all the locations that could set it to true have been dropped. This means that all code blocks depending on the flag being set is dead code and the other code blocks should be executed always. Just do that and drop the now uneeded CAS reboot flag. Fix a comment on the way to make checkpatch happy. Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <158514994893.478799.11772512888322840990.stgit@bahia.lan> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-05-07spapr/cas: Separate CAS handling from rebuilding the FDTAlexey Kardashevskiy
At the moment "ibm,client-architecture-support" ("CAS") is implemented in SLOF and QEMU assists via the custom H_CAS hypercall which copies an updated flatten device tree (FDT) blob to the SLOF memory which it then uses to update its internal tree. When we enable the OpenFirmware client interface in QEMU, we won't need to copy the FDT to the guest as the client is expected to fetch the device tree using the client interface. This moves FDT rebuild out to a separate helper which is going to be called from the "ibm,client-architecture-support" handler and leaves writing FDT to the guest in the H_CAS handler. This should not cause any behavioral change. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Message-Id: <20200310050733.29805-3-aik@ozlabs.ru> Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <158514994229.478799.2178881312094922324.stgit@bahia.lan> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-05-06Merge remote-tracking branch ↵Peter Maydell
'remotes/stefanberger/tags/pull-tpm-2020-05-06-1' into staging Merge tpm 2020/05/06 v1 # gpg: Signature made Wed 06 May 2020 15:16:17 BST # gpg: using RSA key B818B9CADF9089C2D5CEC66B75AD65802A0B4211 # gpg: Good signature from "Stefan Berger <stefanb@linux.vnet.ibm.com>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: B818 B9CA DF90 89C2 D5CE C66B 75AD 6580 2A0B 4211 * remotes/stefanberger/tags/pull-tpm-2020-05-06-1: hw: add compat machines for 5.1 hw/arm/virt: Remove the compat forcing tpm-tis-device PPI to off tpm: tpm-tis-device: set PPI to false by default Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-06hw: add compat machines for 5.1Cornelia Huck
Add 5.1 machine types for arm/i440fx/q35/s390x/spapr. Acked-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com> Message-id: 20200429144605.7262-1-cohuck@redhat.com
2020-05-05hw/core/register: Add register_init_block8 helper.Joaquin de Andres
There was no support for 8 bits block registers. Changed register_init_block32 to be generic and static, adding register size in bits as parameter. Created one helper for each size. Signed-off-by: Joaquin de Andres <me@xcancerberox.com.ar> Message-Id: <20200402162839.76636-1-me@xcancerberox.com.ar> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-05-05Merge remote-tracking branch ↵Peter Maydell
'remotes/vivier2/tags/trivial-branch-for-5.1-pull-request' into staging trivial patches (20200504) Silent static analyzer warning Remove dead assignments Support -chardev serial on macOS Update MAINTAINERS Some cosmetic changes # gpg: Signature made Mon 04 May 2020 16:45:18 BST # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier2/tags/trivial-branch-for-5.1-pull-request: hw/timer/pxa2xx_timer: Add assertion to silent static analyzer warning hw/timer/stm32f2xx_timer: Remove dead assignment hw/gpio/aspeed_gpio: Remove dead assignment hw/isa/i82378: Remove dead assignment hw/ide/sii3112: Remove dead assignment hw/input/adb-kbd: Remove dead assignment hw/i2c/pm_smbus: Remove dead assignment blockdev: Remove dead assignment block: Avoid dead assignment Compress lines for immediate return chardev: Add macOS to list of OSes that support -chardev serial MAINTAINERS: Update Keith Busch's email address elf_ops: Don't try to g_mapped_file_unref(NULL) hw/mem/pc-dimm: Fix line over 80 characters warning hw/mem/pc-dimm: Print slot number on error at pc_dimm_pre_plug() MAINTAINERS: Mark the LatticeMico32 target as orphan timer/exynos4210_mct: Remove redundant statement in exynos4210_mct_write() display/blizzard: use extract16() for fix clang analyzer warning in blizzard_draw_line16_32() scsi/esp-pci: add g_assert() for fix clang analyzer warning in esp_pci_io_write() Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-04hw/i386: Make vmmouse helpers staticPhilippe Mathieu-Daudé
The vmmouse helpers are only used in hw/i386/vmmouse.c, make them static. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20200504083342.24273-5-f4bug@amsat.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-05-04hw/i386: Add 'vmport.h' local headerPhilippe Mathieu-Daudé
Move 'vmport' related declarations in a target-specific header. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20200504083342.24273-4-f4bug@amsat.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-05-04hw/i386/pc: Create 'vmport' device in placePhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20200504083342.24273-2-f4bug@amsat.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-05-04hw/arm/virt: Add nvdimm hotplug supportShameer Kolothum
This adds support for nvdimm hotplug events through GED and enables nvdimm for the arm/virt. Now Guests with ACPI can have both cold and hot plug of nvdimms. Hot removal functionality is not yet supported. Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-Id: <20200421125934.14952-5-shameerali.kolothum.thodi@huawei.com> Acked-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-05-04hw/arm/virt: Add nvdimm hot-plug infrastructureKwangwoo Lee
This adds support to init nvdimm acpi state and build nvdimm acpi tables. Please note nvdimm_support is not yet enabled. Signed-off-by: Kwangwoo Lee <kwangwoo.lee@sk.com> Signed-off-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20200421125934.14952-4-shameerali.kolothum.thodi@huawei.com> Acked-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-05-04nvdimm: Use configurable ACPI IO base and sizeKwangwoo Lee
This patch makes IO base and size configurable to create NPIO AML for ACPI NFIT. Since a different architecture like AArch64 does not use port-mapped IO, a configurable IO base is required to create correct mapping of ACPI IO address and size. Signed-off-by: Kwangwoo Lee <kwangwoo.lee@sk.com> Signed-off-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20200421125934.14952-3-shameerali.kolothum.thodi@huawei.com> Acked-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-05-04rtc: add RTC_ISA_BASEGerd Hoffmann
Add and use RTC_ISA_BASE define instead of hardcoding 0x70. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-Id: <20200429140003.7336-7-kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2020-05-04acpi: add ISADeviceClass->build_aml()Gerd Hoffmann
Also add isa_aml_build() function which walks all isa devices. This allows to move aml builder code to isa devices. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20200429140003.7336-6-kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-05-04move 'typedef Aml' to qemu/types.hGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20200429140003.7336-2-kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-05-04elf_ops: Don't try to g_mapped_file_unref(NULL)Peter Maydell
Calling g_mapped_file_unref() on a NULL pointer is not valid, and glib will assert if you try it. $ qemu-system-arm -M virt -display none -device loader,file=/tmp/bad.elf qemu-system-arm: -device loader,file=/tmp/bad.elf: GLib: g_mapped_file_unref: assertion 'file != NULL' failed (One way to produce an ELF file that fails like this is to copy just the first 16 bytes of a valid ELF file; this is sufficient to fool the code in load_elf_ram_sym() into thinking it's an ELF file and calling load_elf32() or load_elf64().) The failure-exit path in load_elf can be reached from various points in execution, and for some of those we haven't yet called g_mapped_file_new_from_fd(). Add a condition to the unref call so we only call it if we successfully created the GMappedFile to start with. This will fix the assertion; for the specific case of the generic loader it will then fall back from "guess this is an ELF file" to "maybe it's a uImage or a hex file" and eventually to "just load as a raw data file". Reported-by: Randy Yates <yates@ieee.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Message-Id: <20200423202011.32686-1-peter.maydell@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-05-04hw/arm: versal: Add support for the RTCEdgar E. Iglesias
hw/arm: versal: Add support for the RTC. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Message-id: 20200427181649.26851-10-edgar.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-04hw/arm: versal: Add support for SDEdgar E. Iglesias
Add support for SD. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Message-id: 20200427181649.26851-9-edgar.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-04hw/arm: versal: Embed the APUs into the SoC typeEdgar E. Iglesias
Embed the APUs into the SoC type. Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Message-id: 20200427181649.26851-8-edgar.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-04hw/arm: versal: Embed the ADMAs into the SoC typeEdgar E. Iglesias
Embed the ADMAs into the SoC type. Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Message-id: 20200427181649.26851-7-edgar.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-04hw/arm: versal: Embed the GEMs into the SoC typeEdgar E. Iglesias
Embed the GEMs into the SoC type. Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Message-id: 20200427181649.26851-6-edgar.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-04hw/arm: versal: Embed the UARTs into the SoC typeEdgar E. Iglesias
Embed the UARTs into the SoC type. Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Message-id: 20200427181649.26851-5-edgar.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-04-30Merge remote-tracking branch ↵Peter Maydell
'remotes/pmaydell/tags/pull-target-arm-20200430-1' into staging target-arm queue: * xlnx-zdma: Fix endianness handling of descriptor loading * nrf51: Fix last GPIO CNF address * gicv3: Use gicr_typer in arm_gicv3_icc_reset * msf2: Add EMAC block to SmartFusion2 SoC * New clock modelling framework * hw/arm: versal: Setup the ADMA with 128bit bus-width * Cadence: gem: fix wraparound in 64bit descriptors * cadence_gem: clear RX control descriptor * target/arm: Vectorize integer comparison vs zero * hw/arm/virt: dt: add kaslr-seed property * hw/arm: xlnx-zcu102: Disable unsupported FDT firmware nodes # gpg: Signature made Thu 30 Apr 2020 15:43:54 BST # gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE # gpg: issuer "peter.maydell@linaro.org" # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate] # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * remotes/pmaydell/tags/pull-target-arm-20200430-1: (30 commits) hw/arm: xlnx-zcu102: Disable unsupported FDT firmware nodes hw/arm: xlnx-zcu102: Move arm_boot_info into XlnxZCU102 device_tree: Constify compat in qemu_fdt_node_path() device_tree: Allow name wildcards in qemu_fdt_node_path() target/arm/cpu: Update coding style to make checkpatch.pl happy target/arm: Make cpu_register() available for other files target/arm: Restrict the Address Translate write operation to TCG accel hw/arm/virt: dt: add kaslr-seed property hw/arm/virt: dt: move creation of /secure-chosen to create_fdt() target/arm: Vectorize integer comparison vs zero net: cadence_gem: clear RX control descriptor Cadence: gem: fix wraparound in 64bit descriptors hw/arm: versal: Setup the ADMA with 128bit bus-width qdev-monitor: print the device's clock with info qtree hw/arm/xilinx_zynq: connect uart clocks to slcr hw/char/cadence_uart: add clock support hw/misc/zynq_slcr: add clock generation for uarts docs/clocks: add device's clock documentation qdev-clock: introduce an init array to ease the device construction qdev: add clock input&output support to devices. ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-04-30hw/char/cadence_uart: add clock supportDamien Hedde
Switch the cadence uart to multi-phase reset and add the reference clock input. The input clock frequency is added to the migration structure. The reference clock controls the baudrate generation. If it disabled, any input characters and events are ignored. If this clock remains unconnected, the uart behaves as before (it default to a 50MHz ref clock). Signed-off-by: Damien Hedde <damien.hedde@greensocs.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200406135251.157596-8-damien.hedde@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-04-30qdev-clock: introduce an init array to ease the device constructionDamien Hedde
Introduce a function and macro helpers to setup several clocks in a device from a static array description. An element of the array describes the clock (name and direction) as well as the related callback and an optional offset to store the created object pointer in the device state structure. The array must be terminated by a special element QDEV_CLOCK_END. This is based on the original work of Frederic Konrad. Signed-off-by: Damien Hedde <damien.hedde@greensocs.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 20200406135251.157596-5-damien.hedde@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-04-30qdev: add clock input&output support to devices.Damien Hedde
Add functions to easily handle clocks with devices. Clock inputs and outputs should be used to handle clock propagation between devices. The API is very similar the GPIO API. This is based on the original work of Frederic Konrad. Signed-off-by: Damien Hedde <damien.hedde@greensocs.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200406135251.157596-4-damien.hedde@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-04-30hw/core/clock-vmstate: define a vmstate entry for clock stateDamien Hedde
Signed-off-by: Damien Hedde <damien.hedde@greensocs.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 20200406135251.157596-3-damien.hedde@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-04-30Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20200430' into stagingPeter Maydell
- update Linux headers to 5.7-rc3 (and virtio-net fixup) - support for protected virtualization aka secure execution # gpg: Signature made Thu 30 Apr 2020 10:41:31 BST # gpg: using RSA key C3D0D66DC3624FF6A8C018CEDECF6B93C6F02FAF # gpg: issuer "cohuck@redhat.com" # gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>" [marginal] # gpg: aka "Cornelia Huck <huckc@linux.vnet.ibm.com>" [full] # gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>" [full] # gpg: aka "Cornelia Huck <cohuck@kernel.org>" [marginal] # gpg: aka "Cornelia Huck <cohuck@redhat.com>" [marginal] # Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF * remotes/cohuck/tags/s390x-20200430: s390x/s390-virtio-ccw: Fix build on systems without KVM s390x/pv: Retry ioctls on -EINTR s390x: protvirt: Fix stray error_report_err in s390_machine_protect s390x: Add unpack facility feature to GA1 docs: system: Add protvirt docs s390x: protvirt: Handle SIGP store status correctly s390x: protvirt: Move IO control structures over SIDA s390x: protvirt: Disable address checks for PV guest IO emulation s390x: protvirt: Move diag 308 data over SIDA s390x: protvirt: Set guest IPL PSW s390x: protvirt: SCLP interpretation s390x: protvirt: Move STSI data over SIDAD s390x: Add SIDA memory ops s390x: protvirt: KVM intercept changes s390x: protvirt: Inhibit balloon when switching to protected mode s390x: protvirt: Add migration blocker s390x: protvirt: Support unpack facility s390x: Move diagnose 308 subcodes and rcs into ipl.h linux-headers: update against Linux 5.7-rc3 virtio-net: fix rsc_ext compat handling Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-04-30hw/core/clock: introduce clock objectPeter Maydell
This object may be used to represent a clock inside a clock tree. A clock may be connected to another clock so that it receives update, through a callback, whenever the source/parent clock is updated. Although only the root clock of a clock tree controls the values (represented as periods) of all clocks in tree, each clock holds a local state containing the current value so that it can be fetched independently. It will allows us to fullfill migration requirements by migrating each clock independently of others. This is based on the original work of Frederic Konrad. Signed-off-by: Damien Hedde <damien.hedde@greensocs.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 20200406135251.157596-2-damien.hedde@greensocs.com [PMM: Use uint64_t rather than unsigned long long in trace events; the dtrace backend can't handle the latter] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-04-30msf2: Add EMAC block to SmartFusion2 SoCSubbaraya Sundeep
With SmartFusion2 Ethernet MAC model in place this patch adds the same to SoC. Signed-off-by: Subbaraya Sundeep <sundeep.lkml@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 1587048891-30493-3-git-send-email-sundeep.lkml@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-04-30hw/net: Add Smartfusion2 emac blockSubbaraya Sundeep
Modelled Ethernet MAC of Smartfusion2 SoC. Micrel KSZ8051 PHY is present on Emcraft's SOM kit hence same PHY is emulated. Signed-off-by: Subbaraya Sundeep <sundeep.lkml@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 1587048891-30493-2-git-send-email-sundeep.lkml@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-04-30nrf51: Fix last GPIO CNF addressCameron Esfahani
NRF51_GPIO_REG_CNF_END doesn't actually refer to the start of the last valid CNF register: it's referring to the last byte of the last valid CNF register. This hasn't been a problem up to now, as current implementation in memory.c turns an unaligned 4-byte read from 0x77f to a single byte read and the qtest only looks at the least-significant byte of the register. But when running with patches which fix unaligned accesses in memory.c, the qtest breaks. Considering NRF51 doesn't support unaligned accesses, the simplest fix is to actually set NRF51_GPIO_REG_CNF_END to the start of the last valid CNF register: 0x77c. Now, qtests work with or without the unaligned access patches. Reviewed-by: Cédric Le Goater <clg@kaod.org> Tested-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Cameron Esfahani <dirty@apple.com> Message-id: 51b427f06838622da783d38ba56e3630d6d85c60.1586925392.git.dirty@apple.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-04-29hw/riscv: Add optional symbol callback ptr to riscv_load_firmware()Anup Patel
This patch adds an optional function pointer, "sym_cb", to riscv_load_firmware() which provides the possibility to access the symbol table during kernel loading. The pointer is ignored, if supplied with flat (non-elf) firmware image. The Spike board requires it locate the HTIF symbols from firmware ELF passed via "-bios" option. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200427080644.168461-2-anup.patel@wdc.com Message-Id: <20200427080644.168461-2-anup.patel@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-04-29riscv/sifive_u: Add a serial property to the sifive_u machineBin Meng
At present the board serial number is hard-coded to 1, and passed to OTP model during initialization. Firmware (FSBL, U-Boot) uses the serial number to generate a unique MAC address for the on-chip ethernet controller. When multiple QEMU 'sifive_u' instances are created and connected to the same subnet, they all have the same MAC address hence it creates a unusable network. A new "serial" property is introduced to specify the board serial number. When not given, the default serial number 1 is used. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1573916930-19068-1-git-send-email-bmeng.cn@gmail.com> [ Changed by AF: - Use the SoC's serial property to pass the info to the SoC - Fixup commit title - Rebase on file restructuring ] Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-04-29riscv/sifive_u: Add a serial property to the sifive_u SoCAlistair Francis
At present the board serial number is hard-coded to 1, and passed to OTP model during initialization. Firmware (FSBL, U-Boot) uses the serial number to generate a unique MAC address for the on-chip ethernet controller. When multiple QEMU 'sifive_u' instances are created and connected to the same subnet, they all have the same MAC address hence it creates a unusable network. A new "serial" property is introduced to the sifive_u SoC to specify the board serial number. When not given, the default serial number 1 is used. Suggested-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2020-04-29s390x/s390-virtio-ccw: Fix build on systems without KVMChristian Borntraeger
linux/kvm.h is not available on all platforms. Let us move s390_machine_inject_pv_error into pv.c as it uses KVM structures. Also rename the function to s390_pv_inject_reset_error. While at it, ipl.h needs an include for "exec/address-spaces.h" as it uses address_space_memory. Fixes: c3347ed0d2ee ("s390x: protvirt: Support unpack facility") Reported-by: Bruce Rogers <brogers@suse.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Message-Id: <20200406100158.5940-2-borntraeger@de.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-02-21 19:28:30 +0000