aboutsummaryrefslogtreecommitdiff
path: root/include/hw
AgeCommit message (Collapse)Author
2023-06-22hw/cxl/events: Wire up get/clear event mailbox commandsIra Weiny
CXL testing is benefited from an artificial event log injection mechanism. Add an event log infrastructure to insert, get, and clear events from the various logs available on a device. Replace the stubbed out CXL Get/Clear Event mailbox commands with commands that operate on the new infrastructure. Signed-off-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Fan Ni <fan.ni@samsung.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20230530133603.16934-4-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-06-22hw/cxl: Move CXLRetCode definition to cxl_device.hJonathan Cameron
Following patches will need access to the mailbox return code type so move it to the header. Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Fan Ni <fan.ni@samsung.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20230530133603.16934-3-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-06-22hw/cxl/events: Add event status registerIra Weiny
The device status register block was defined. However, there were no individual registers nor any data wired up. Define the event status register [CXL 3.0; 8.2.8.3.1] as part of the device status register block. Wire up the register and initialize the event status for each log. To support CXL 3.0 the version of the device status register block needs to be 2. Change the macro to allow for setting the version. Signed-off-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Fan Ni <fan.ni@samsung.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20230530133603.16934-2-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-06-22hw/cxl: Add clear poison mailbox command support.Jonathan Cameron
Current implementation is very simple so many of the corner cases do not exist (e.g. fragmenting larger poison list entries) Reviewed-by: Fan Ni <fan.ni@samsung.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20230526170010.574-5-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-06-22hw/cxl: QMP based poison injection supportJonathan Cameron
Inject poison using QMP command cxl-inject-poison to add an entry to the poison list. For now, the poison is not returned CXL.mem reads, but only via the mailbox command Get Poison List. So a normal memory read to an address that is on the poison list will not yet result in a synchronous exception (and similar for partial cacheline writes). That is left for a future patch. See CXL rev 3.0, sec 8.2.9.8.4.1 Get Poison list (Opcode 4300h) Kernel patches to use this interface here: https://lore.kernel.org/linux-cxl/cover.1665606782.git.alison.schofield@intel.com/ To inject poison using QMP (telnet to the QMP port) { "execute": "qmp_capabilities" } { "execute": "cxl-inject-poison", "arguments": { "path": "/machine/peripheral/cxl-pmem0", "start": 2048, "length": 256 } } Adjusted to select a device on your machine. Note that the poison list supported is kept short enough to avoid the complexity of state machine that is needed to handle the MORE flag. Reviewed-by: Fan Ni <fan.ni@samsung.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Acked-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20230526170010.574-3-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-06-22q800: move macfb device to Q800MachineStateMark Cave-Ayland
Also change the instantiation of the macfb device to use object_initialize_child(). Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20230621085353.113233-23-mark.cave-ayland@ilande.co.uk> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2023-06-22q800: move mac-nubus-bridge device to Q800MachineStateMark Cave-Ayland
Also change the instantiation of the mac-nubus-bridge device to use object_initialize_child() and map the Nubus address space using memory_region_add_subregion() instead of sysbus_mmio_map(). Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230621085353.113233-21-mark.cave-ayland@ilande.co.uk> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2023-06-22q800: move SWIM device to Q800MachineStateMark Cave-Ayland
Also change the instantiation of the SWIM device to use object_initialize_child(). Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20230621085353.113233-20-mark.cave-ayland@ilande.co.uk> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2023-06-22q800: move ESP device to Q800MachineStateMark Cave-Ayland
Also change the instantiation of the ESP device to use object_initialize_child(). Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20230621085353.113233-19-mark.cave-ayland@ilande.co.uk> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2023-06-22q800: move escc_orgate device to Q800MachineStateMark Cave-Ayland
Also change the instantiation of the escc_orgate device to use object_initialize_child(). Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20230621085353.113233-18-mark.cave-ayland@ilande.co.uk> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2023-06-22q800: move ESCC device to Q800MachineStateMark Cave-Ayland
Also change the instantiation of the ESCC device to use object_initialize_child(). Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20230621085353.113233-17-mark.cave-ayland@ilande.co.uk> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2023-06-22q800: move dp8393x device to Q800MachineStateMark Cave-Ayland
Also change the instantiation of the dp8393x device to use object_initialize_child(). Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> CC: Jason Wang <jasowang@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20230621085353.113233-16-mark.cave-ayland@ilande.co.uk> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2023-06-22hw/net/dp8393x.c: move TYPE_DP8393X and dp8393xState into dp8393x.hMark Cave-Ayland
This is to enable them to be used outside of dp8393x.c. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> CC: Jason Wang <jasowang@redhat.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230621085353.113233-15-mark.cave-ayland@ilande.co.uk> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2023-06-22q800: move VIA2 device to Q800MachineStateMark Cave-Ayland
Also change the instantiation of the VIA2 device to use object_initialize_child(). Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20230621085353.113233-14-mark.cave-ayland@ilande.co.uk> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2023-06-22q800: move VIA1 device to Q800MachineStateMark Cave-Ayland
Also change the instantiation of the VIA1 device to use object_initialize_child(). Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20230621085353.113233-13-mark.cave-ayland@ilande.co.uk> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2023-06-22q800: reimplement mac-io region aliasing using IO memory regionMark Cave-Ayland
The current use of aliased memory regions causes us 2 problems: firstly the output of "info qom-tree" is absolutely huge and difficult to read, and secondly we have already reached the internal limit for memory regions as adding any new memory region into the mac-io region causes QEMU to assert with "phys_section_add: Assertion `map->sections_nb < TARGET_PAGE_SIZE' failed". Implement the mac-io region aliasing using a single IO memory region that applies IO_SLICE_MASK representing the maximum size of the aliased region and then forwarding the access to the existing mac-io memory region using the address space API. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20230621085353.113233-12-mark.cave-ayland@ilande.co.uk> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2023-06-22q800: introduce mac-io container memory regionMark Cave-Ayland
Move all devices from the IO region to within the container in preparation for updating the IO aliasing mechanism. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230621085353.113233-11-mark.cave-ayland@ilande.co.uk> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2023-06-22q800: move GLUE device to Q800MachineStateMark Cave-Ayland
Also change the instantiation of the GLUE device to use object_initialize_child(). Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20230621085353.113233-10-mark.cave-ayland@ilande.co.uk> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2023-06-22q800: move GLUE device into separate q800-glue.c fileMark Cave-Ayland
This will allow the q800-glue.h header to be included separately so that the GLUE device can be referenced externally. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230621085353.113233-8-mark.cave-ayland@ilande.co.uk> [lv: update comment] Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2023-06-22q800: move ROM memory region to Q800MachineStateMark Cave-Ayland
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20230621085353.113233-7-mark.cave-ayland@ilande.co.uk> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2023-06-22q800: move CPU object into Q800MachineStateMark Cave-Ayland
Also change the instantiation of the CPU to use object_initialize_child() followed by a separate realisation. Restrict valid CPU types to m68040. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230621085353.113233-6-mark.cave-ayland@ilande.co.uk> [lv: update commit message] Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2023-06-22q800: introduce Q800MachineStateMark Cave-Ayland
This provides an overall container and owner for Machine-related objects such as MemoryRegions. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230621085353.113233-4-mark.cave-ayland@ilande.co.uk> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2023-06-21Revert "cputlb: Restrict SavedIOTLB to system emulation"Peter Maydell
This reverts commit d7ee93e24359703debf4137f4cc632563aa4e8d1. That commit tries to make a field in the CPUState struct not be present when CONFIG_USER_ONLY is set. Unfortunately, you can't conditionally omit fields in structs like this based on ifdefs that are set per-target. If you try it, then code in files compiled per-target (where CONFIG_USER_ONLY is or can be set) will disagree about the struct layout with files that are compiled once-only (where this kind of ifdef is never set). This manifests specifically in 'make check-tcg' failing, because code in cpus-common.c that sets up the CPUState::cpu_index field puts it at a different offset from the code in plugins/core.c in qemu_plugin_vcpu_init_hook() which reads the cpu_index field. The latter then hits an assert because from its point of view every thread has a 0 cpu_index. There might be other weird behaviour too. Mostly we catch this kind of bug because the CONFIG_whatever is listed in include/exec/poison.h and so the reference to it in build-once source files will then cause a compiler error. Unfortunately CONFIG_USER_ONLY is an exception to that: we have some places where we use it in "safe" ways in headers that will be seen by once-only source files (e.g. ifdeffing out function prototypes) and it would be a lot of refactoring to be able to get to a position where we could poison it. This leaves us in a "you have to be careful to walk around the bear trap" situation... Fixes: d7ee93e243597 ("cputlb: Restrict SavedIOTLB to system emulation") Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20230620175712.1331625-1-peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-20cputlb: Restrict SavedIOTLB to system emulationPhilippe Mathieu-Daudé
Commit 2f3a57ee47 ("cputlb: ensure we save the IOTLB data in case of reset") added the SavedIOTLB structure -- which is system emulation specific -- in the generic CPUState structure. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20221216215519.5522-3-philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-20hw/core/cpu: Check for USER_ONLY definition instead of SOFTMMU onePhilippe Mathieu-Daudé
Since we *might* have user emulation with softmmu, replace the system emulation check by !user emulation one. Invert the #ifdef'ry in TCGCPUOps structure for clarity. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230613133347.82210-6-philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-19hw/misc/bcm2835_property: Handle CORE_CLK_ID firmware propertySergey Kambalin
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230612223456.33824-5-philmd@linaro.org Message-Id: <20230531155258.8361-1-sergey.kambalin@auriga.com> [PMD: Split from bigger patch: 3/4] Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> [PMM: added a comment about RPI_FIRMWARE_CORE_CLK_RATE really being SoC-specific] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-19hw/misc/bcm2835_property: Replace magic frequency values by definitionsSergey Kambalin
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230612223456.33824-4-philmd@linaro.org Message-Id: <20230531155258.8361-1-sergey.kambalin@auriga.com> [PMD: Split from bigger patch: 4/4] Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-19hw/arm/raspi: Import Linux raspi definitions as 'raspberrypi-fw-defs.h'Sergey Kambalin
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Acked-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230612223456.33824-2-philmd@linaro.org Message-Id: <20230531155258.8361-1-sergey.kambalin@auriga.com> [PMD: Split from bigger patch: 1/4] Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-19imx_serial: set wake bit when we receive a data byteMartin Kaiser
The Linux kernel added a flood check for RX data recently in commit 496a4471b7c3 ("serial: imx: work-around for hardware RX flood"). This check uses the wake bit in the UART status register 2. The wake bit indicates that the receiver detected a start bit on the RX line. If the kernel sees a number of RX interrupts without the wake bit being set, it treats this as spurious data and resets the UART port. imx_serial does never set the wake bit and triggers the kernel's flood check. This patch adds support for the wake bit. wake is set when we receive a new character (it's not set for break events). It seems that wake is cleared by the kernel driver, the hardware does not have to clear it automatically after data was read. The wake bit can be configured as an interrupt source. Support this mechanism as well. Co-developed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Martin Kaiser <martin@kaiser.cx> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-15hw/arm: introduce xenpvh machineVikram Garhwal
Add a new machine xenpvh which creates a IOREQ server to register/connect with Xen Hypervisor. Optional: When CONFIG_TPM is enabled, it also creates a tpm-tis-device, adds a TPM emulator and connects to swtpm running on host machine via chardev socket and support TPM functionalities for a guest domain. Extra command line for aarch64 xenpvh QEMU to connect to swtpm: -chardev socket,id=chrtpm,path=/tmp/myvtpm2/swtpm-sock \ -tpmdev emulator,id=tpm0,chardev=chrtpm \ -machine tpm-base-addr=0x0c000000 \ swtpm implements a TPM software emulator(TPM 1.2 & TPM 2) built on libtpms and provides access to TPM functionality over socket, chardev and CUSE interface. Github repo: https://github.com/stefanberger/swtpm Example for starting swtpm on host machine: mkdir /tmp/vtpm2 swtpm socket --tpmstate dir=/tmp/vtpm2 \ --ctrl type=unixio,path=/tmp/vtpm2/swtpm-sock & Signed-off-by: Vikram Garhwal <vikram.garhwal@amd.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
2023-06-15include/hw/xen/xen_common: return error from xen_create_ioreq_serverStefano Stabellini
This is done to prepare for enabling xenpv support for ARM architecture. On ARM it is possible to have a functioning xenpv machine with only the PV backends and no IOREQ server. If the IOREQ server creation fails, continue to the PV backends initialization. Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com> Signed-off-by: Vikram Garhwal <vikram.garhwal@amd.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Reviewed-by: Paul Durrant <paul@xen.org>
2023-06-15xen-hvm: reorganize xen-hvm and move common function to xen-hvm-commonStefano Stabellini
This patch does following: 1. creates arch_handle_ioreq() and arch_xen_set_memory(). This is done in preparation for moving most of xen-hvm code to an arch-neutral location, move the x86-specific portion of xen_set_memory to arch_xen_set_memory. Also, move handle_vmport_ioreq to arch_handle_ioreq. 2. Pure code movement: move common functions to hw/xen/xen-hvm-common.c Extract common functionalities from hw/i386/xen/xen-hvm.c and move them to hw/xen/xen-hvm-common.c. These common functions are useful for creating an IOREQ server. xen_hvm_init_pc() contains the architecture independent code for creating and mapping a IOREQ server, connecting memory and IO listeners, initializing a xen bus and registering backends. Moved this common xen code to a new function xen_register_ioreq() which can be used by both x86 and ARM machines. Following functions are moved to hw/xen/xen-hvm-common.c: xen_vcpu_eport(), xen_vcpu_ioreq(), xen_ram_alloc(), xen_set_memory(), xen_region_add(), xen_region_del(), xen_io_add(), xen_io_del(), xen_device_realize(), xen_device_unrealize(), cpu_get_ioreq_from_shared_memory(), cpu_get_ioreq(), do_inp(), do_outp(), rw_phys_req_item(), read_phys_req_item(), write_phys_req_item(), cpu_ioreq_pio(), cpu_ioreq_move(), cpu_ioreq_config(), handle_ioreq(), handle_buffered_iopage(), handle_buffered_io(), cpu_handle_ioreq(), xen_main_loop_prepare(), xen_hvm_change_state_handler(), xen_exit_notifier(), xen_map_ioreq_server(), destroy_hvm_domain() and xen_shutdown_fatal_error() 3. Removed static type from below functions: 1. xen_region_add() 2. xen_region_del() 3. xen_io_add() 4. xen_io_del() 5. xen_device_realize() 6. xen_device_unrealize() 7. xen_hvm_change_state_handler() 8. cpu_ioreq_pio() 9. xen_exit_notifier() 4. Replace TARGET_PAGE_SIZE with XC_PAGE_SIZE to match the page side with Xen. Signed-off-by: Vikram Garhwal <vikram.garhwal@amd.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com> Acked-by: Stefano Stabellini <sstabellini@kernel.org>
2023-06-14Merge tag 'pull-riscv-to-apply-20230614' of ↵Richard Henderson
https://github.com/alistair23/qemu into staging Second RISC-V PR for 8.1 * Skip Vector set tail when vta is zero * Move zc* out of the experimental properties * Mask the implicitly enabled extensions in isa_string based on priv version * Rework CPU extension validation and validate MISA changes * Fixup PMP TLB cacheing errors * Writing to pmpaddr and MML/MMWP correctly triggers TLB flushes * Fixup PMP bypass checks * Deny access if access is partially inside a PMP entry * Correct OpenTitanState parent type/size * Fix QEMU crash when NUMA nodes exceed available CPUs * Fix pointer mask transformation for vector address * Updates and improvements for Smstateen * Support disas for Zcm* extensions * Support disas for Z*inx extensions * Remove unused decomp_rv32/64 value for vector instructions * Enable PC-relative translation * Assume M-mode FW in pflash0 only when "-bios none" * Support using pflash via -blockdev option * Add vector registers to log * Clean up reference of Vector MTYPE * Remove the check for extra Vector tail elements * Smepmp: Return error when access permission not allowed in PMP * Fixes for smsiaddrcfg and smsiaddrcfgh in AIA # -----BEGIN PGP SIGNATURE----- # # iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmSJFRoACgkQr3yVEwxT # gBMUkg/8Cuhqpx+zy7MeouVkyhEjUuhtCWyr0WVZBJzDkVEOrlY6TyR0hb5/o1Js # LZf6ZMF6JQDN78bmUct8yFBZBGafey5tyonDCsnD7CNQuLPf2NSjTHhu9n5hKFqF # F8Mpn9iFu6k1pr0iF7FbCccVWuDb3P4h2PaM0iFhmf4uz42BCMYdgJThhvv38xlt # jr6A3dcjTpp8yB+iRCuhL2IU2XVee0XBiDUECqRXd0gmtOtqJNST8L+l8YkLy1VO # WUMe8RCO6NMP7BLJ383WwCDeiFTo0mJebZQ0eR/G1xEhy7c8BBMh/CgQmq2F3wDZ # Q0biaeozADgAaCC7aOAHI+1sAoMhOm1v2WhIVmh+XXUqT9856cKwc7DUPBmzb9Sj # N5Zh+t9WCnZG7qpfxvkDF0Y/aRODMHZ1BW5L/ky9yBtyuRwXOJ6VycZTFyRkSwnN # Gd/s9IClDOP1IP5s4TSMGGdelk4lH97x7fZE/2hxn59lp761JtMxbaEceBtqaBh8 # zNMTNN/KHs8LeiIBI2ZZ+nQav452Y6XYBivQ7OdsI8xkjnjG9gfgXXjvX1TIh0ow # Hy5ZxtAtjXty49Gmjkx5VcBx4auJcnRDlLTzoZjTxq1te+gEWpw6O1EsEKasVLZe # uN6PxTOxS3nHvRvPgQc1xNUdhDRqBaYsju6b9YmMxz1uefAjGM0= # =fOTc # -----END PGP SIGNATURE----- # gpg: Signature made Wed 14 Jun 2023 03:17:14 AM CEST # gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013 # gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013 * tag 'pull-riscv-to-apply-20230614' of https://github.com/alistair23/qemu: (60 commits) hw/intc: If mmsiaddrcfgh.L == 1, smsiaddrcfg and smsiaddrcfgh are read-only. target/riscv: Smepmp: Return error when access permission not allowed in PMP target/riscv/vector_helper.c: Remove the check for extra tail elements target/riscv/vector_helper.c: clean up reference of MTYPE target/riscv: Fix initialized value for cur_pmmask util/log: Add vector registers to log docs/system: riscv: Add pflash usage details riscv/virt: Support using pflash via -blockdev option hw/riscv: virt: Assume M-mode FW in pflash0 only when "-bios none" target/riscv: Remove pc_succ_insn from DisasContext target/riscv: Enable PC-relative translation target/riscv: Use true diff for gen_pc_plus_diff target/riscv: Change gen_set_pc_imm to gen_update_pc target/riscv: Change gen_goto_tb to work on displacements target/riscv: Introduce cur_insn_len into DisasContext target/riscv: Fix target address to update badaddr disas/riscv.c: Remove redundant parentheses disas/riscv.c: Fix lines with over 80 characters disas/riscv.c: Remove unused decomp_rv32/64 value for vector instructions disas/riscv.c: Support disas for Z*inx extensions ... Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-13hw/char/parallel-isa: Export struct ISAParallelStateBernhard Beschow
Allows the struct to be embedded directly into device models without additional allocation. Suggested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230612081238.1742-3-shentey@gmail.com> [PMD: Update MAINTAINERS entry and use SPDX license identifier] Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-06-13hw/char/parallel: Export struct ParallelStateBernhard Beschow
Exporting ParallelState is a precondition for exporing TYPE_ISA_PARALLEL to be performed in the next patch. Suggested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230612081238.1742-2-shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-06-13util/log: Add vector registers to logIvan Klokov
Added QEMU option 'vpu' to log vector extension registers such as gpr\fpu. Signed-off-by: Ivan Klokov <ivan.klokov@syntacore.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230410124451.15929-2-ivan.klokov@syntacore.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-06-13hw/riscv/opentitan: Correct OpenTitanState parent type/sizePhilippe Mathieu-Daudé
OpenTitanState is the 'machine' (or 'board') state: it isn't a SysBus device, but inherits from the MachineState type. Correct the instance size. Doing so we avoid leaking an OpenTitanState pointer in opentitan_machine_init(). Fixes: fe0fe4735e ("riscv: Initial commit of OpenTitan machine") Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-Id: <20230520054510.68822-6-philmd@linaro.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-06-13hw/riscv/opentitan: Explicit machine type definitionPhilippe Mathieu-Daudé
Expand the DEFINE_MACHINE() macro, converting the class_init() handler. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-Id: <20230520054510.68822-5-philmd@linaro.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-06-13hw/riscv/opentitan: Add TYPE_OPENTITAN_MACHINE definitionPhilippe Mathieu-Daudé
QOM type names are usually defined as TYPE_FOO. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-Id: <20230520054510.68822-4-philmd@linaro.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-06-10hw/ppc/openpic: Do not open-code ROUND_UP() macroPhilippe Mathieu-Daudé
While reviewing, the ROUND_UP() macro is easier to figure out. Besides, the comment confirms we want to round up here. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-Id: <20230523061546.49031-1-philmd@linaro.org> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2023-06-10pnv/xive2: Introduce macros to manipulate TIMA addressesFrederic Barrat
TIMA addresses are somewhat special and are split in several bit fields with different meanings. This patch describes it and introduce macros to more easily access the various fields. Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20230601121331.487207-5-fbarrat@linux.ibm.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2023-06-07hw/isa/piix3: Resolve redundant TYPE_PIIX3_XEN_DEVICEBernhard Beschow
During the last patches, TYPE_PIIX3_XEN_DEVICE turned into a clone of TYPE_PIIX3_DEVICE. Remove this redundancy. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Anthony PERARD <anthony.perard@citrix.com> Tested-by: Chuck Zmudzinski <brchuckz@aol.com> Message-Id: <20230312120221.99183-7-shentey@gmail.com> Message-Id: <20230403074124.3925-8-shentey@gmail.com> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
2023-06-07include/hw/xen/xen: Rename xen_piix3_set_irq() to xen_intx_set_irq()Bernhard Beschow
xen_piix3_set_irq() isn't PIIX specific: PIIX is a single PCI device while xen_piix3_set_irq() maps multiple PCI devices to their respective IRQs, which is board-specific. Rename xen_piix3_set_irq() to communicate this. Also rename XEN_PIIX_NUM_PIRQS to XEN_IOAPIC_NUM_PIRQS since the Xen's IOAPIC rather than PIIX has this many interrupt routes. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Anthony PERARD <anthony.perard@citrix.com> Tested-by: Chuck Zmudzinski <brchuckz@aol.com> Message-Id: <20230312120221.99183-2-shentey@gmail.com> Message-Id: <20230403074124.3925-2-shentey@gmail.com> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
2023-06-07xen: Drop support for Xen versions below 4.7.1David Woodhouse
In restructuring to allow for internal emulation of Xen functionality, I broke compatibility for Xen 4.6 and earlier. Fix this by explicitly removing support for anything older than 4.7.1, which is also ancient but it does still build, and the compatibility support for it is fairly unintrusive. Fixes: 15e283c5b684 ("hw/xen: Add foreignmem operations to allow redirection to internal emulation") Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Paul Durrant <paul@xen.org> Message-Id: <20230412185102.441523-4-dwmw2@infradead.org> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
2023-06-06hw: arm: allwinner-sramc: Add SRAM Controller support for R40qianfan Zhao
Only a few important registers are added, especially the SRAM_VER register. Signed-off-by: qianfan Zhao <qianfanguijin@163.com> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-06hw: arm: allwinner-r40: Add emac and gmac supportqianfan Zhao
R40 has two ethernet controllers named as emac and gmac. The emac is compatibled with A10, and the GMAC is compatibled with H3. Signed-off-by: qianfan Zhao <qianfanguijin@163.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-06hw: sd: allwinner-sdhost: Add sun50i-a64 SoC supportqianfan Zhao
A64's sd register was similar to H3, and it introduced a new register named SAMP_DL_REG location at 0x144. The dma descriptor buffer size of mmc2 is only 8K and the other mmc controllers has 64K. Also fix allwinner-r40's mmc controller type. Signed-off-by: qianfan Zhao <qianfanguijin@163.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-06hw/arm/allwinner-r40: add SDRAM controller deviceqianfan Zhao
Types of memory that the SDRAM controller supports are DDR2/DDR3 and capacities of up to 2GiB. This commit adds emulation support of the Allwinner R40 SDRAM controller. This driver only support 256M, 512M and 1024M memory now. Signed-off-by: qianfan Zhao <qianfanguijin@163.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-06hw: arm: allwinner-r40: Add i2c0 deviceqianfan Zhao
TWI(i2c) is designed to be used as an interface between CPU host and the serial 2-Wire bus. It can support all standard 2-Wire transfer, can be operated in standard mode(100kbit/s) or fast-mode, supporting data rate up to 400kbit/s. Signed-off-by: qianfan Zhao <qianfanguijin@163.com> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-06hw: allwinner-r40: Complete uart devicesqianfan Zhao
R40 has eight UARTs, support both 16450 and 16550 compatible modes. Signed-off-by: qianfan Zhao <qianfanguijin@163.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.2.3 (git 2.26.2) at 2025-02-09 13:38:19 +0000