aboutsummaryrefslogtreecommitdiff
path: root/include/hw
AgeCommit message (Collapse)Author
2023-06-19hw/misc/bcm2835_property: Handle CORE_CLK_ID firmware propertySergey Kambalin
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230612223456.33824-5-philmd@linaro.org Message-Id: <20230531155258.8361-1-sergey.kambalin@auriga.com> [PMD: Split from bigger patch: 3/4] Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> [PMM: added a comment about RPI_FIRMWARE_CORE_CLK_RATE really being SoC-specific] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-19hw/misc/bcm2835_property: Replace magic frequency values by definitionsSergey Kambalin
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230612223456.33824-4-philmd@linaro.org Message-Id: <20230531155258.8361-1-sergey.kambalin@auriga.com> [PMD: Split from bigger patch: 4/4] Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-19hw/arm/raspi: Import Linux raspi definitions as 'raspberrypi-fw-defs.h'Sergey Kambalin
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Acked-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230612223456.33824-2-philmd@linaro.org Message-Id: <20230531155258.8361-1-sergey.kambalin@auriga.com> [PMD: Split from bigger patch: 1/4] Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-19imx_serial: set wake bit when we receive a data byteMartin Kaiser
The Linux kernel added a flood check for RX data recently in commit 496a4471b7c3 ("serial: imx: work-around for hardware RX flood"). This check uses the wake bit in the UART status register 2. The wake bit indicates that the receiver detected a start bit on the RX line. If the kernel sees a number of RX interrupts without the wake bit being set, it treats this as spurious data and resets the UART port. imx_serial does never set the wake bit and triggers the kernel's flood check. This patch adds support for the wake bit. wake is set when we receive a new character (it's not set for break events). It seems that wake is cleared by the kernel driver, the hardware does not have to clear it automatically after data was read. The wake bit can be configured as an interrupt source. Support this mechanism as well. Co-developed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Martin Kaiser <martin@kaiser.cx> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-15hw/arm: introduce xenpvh machineVikram Garhwal
Add a new machine xenpvh which creates a IOREQ server to register/connect with Xen Hypervisor. Optional: When CONFIG_TPM is enabled, it also creates a tpm-tis-device, adds a TPM emulator and connects to swtpm running on host machine via chardev socket and support TPM functionalities for a guest domain. Extra command line for aarch64 xenpvh QEMU to connect to swtpm: -chardev socket,id=chrtpm,path=/tmp/myvtpm2/swtpm-sock \ -tpmdev emulator,id=tpm0,chardev=chrtpm \ -machine tpm-base-addr=0x0c000000 \ swtpm implements a TPM software emulator(TPM 1.2 & TPM 2) built on libtpms and provides access to TPM functionality over socket, chardev and CUSE interface. Github repo: https://github.com/stefanberger/swtpm Example for starting swtpm on host machine: mkdir /tmp/vtpm2 swtpm socket --tpmstate dir=/tmp/vtpm2 \ --ctrl type=unixio,path=/tmp/vtpm2/swtpm-sock & Signed-off-by: Vikram Garhwal <vikram.garhwal@amd.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
2023-06-15include/hw/xen/xen_common: return error from xen_create_ioreq_serverStefano Stabellini
This is done to prepare for enabling xenpv support for ARM architecture. On ARM it is possible to have a functioning xenpv machine with only the PV backends and no IOREQ server. If the IOREQ server creation fails, continue to the PV backends initialization. Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com> Signed-off-by: Vikram Garhwal <vikram.garhwal@amd.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Reviewed-by: Paul Durrant <paul@xen.org>
2023-06-15xen-hvm: reorganize xen-hvm and move common function to xen-hvm-commonStefano Stabellini
This patch does following: 1. creates arch_handle_ioreq() and arch_xen_set_memory(). This is done in preparation for moving most of xen-hvm code to an arch-neutral location, move the x86-specific portion of xen_set_memory to arch_xen_set_memory. Also, move handle_vmport_ioreq to arch_handle_ioreq. 2. Pure code movement: move common functions to hw/xen/xen-hvm-common.c Extract common functionalities from hw/i386/xen/xen-hvm.c and move them to hw/xen/xen-hvm-common.c. These common functions are useful for creating an IOREQ server. xen_hvm_init_pc() contains the architecture independent code for creating and mapping a IOREQ server, connecting memory and IO listeners, initializing a xen bus and registering backends. Moved this common xen code to a new function xen_register_ioreq() which can be used by both x86 and ARM machines. Following functions are moved to hw/xen/xen-hvm-common.c: xen_vcpu_eport(), xen_vcpu_ioreq(), xen_ram_alloc(), xen_set_memory(), xen_region_add(), xen_region_del(), xen_io_add(), xen_io_del(), xen_device_realize(), xen_device_unrealize(), cpu_get_ioreq_from_shared_memory(), cpu_get_ioreq(), do_inp(), do_outp(), rw_phys_req_item(), read_phys_req_item(), write_phys_req_item(), cpu_ioreq_pio(), cpu_ioreq_move(), cpu_ioreq_config(), handle_ioreq(), handle_buffered_iopage(), handle_buffered_io(), cpu_handle_ioreq(), xen_main_loop_prepare(), xen_hvm_change_state_handler(), xen_exit_notifier(), xen_map_ioreq_server(), destroy_hvm_domain() and xen_shutdown_fatal_error() 3. Removed static type from below functions: 1. xen_region_add() 2. xen_region_del() 3. xen_io_add() 4. xen_io_del() 5. xen_device_realize() 6. xen_device_unrealize() 7. xen_hvm_change_state_handler() 8. cpu_ioreq_pio() 9. xen_exit_notifier() 4. Replace TARGET_PAGE_SIZE with XC_PAGE_SIZE to match the page side with Xen. Signed-off-by: Vikram Garhwal <vikram.garhwal@amd.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com> Acked-by: Stefano Stabellini <sstabellini@kernel.org>
2023-06-14Merge tag 'pull-riscv-to-apply-20230614' of ↵Richard Henderson
https://github.com/alistair23/qemu into staging Second RISC-V PR for 8.1 * Skip Vector set tail when vta is zero * Move zc* out of the experimental properties * Mask the implicitly enabled extensions in isa_string based on priv version * Rework CPU extension validation and validate MISA changes * Fixup PMP TLB cacheing errors * Writing to pmpaddr and MML/MMWP correctly triggers TLB flushes * Fixup PMP bypass checks * Deny access if access is partially inside a PMP entry * Correct OpenTitanState parent type/size * Fix QEMU crash when NUMA nodes exceed available CPUs * Fix pointer mask transformation for vector address * Updates and improvements for Smstateen * Support disas for Zcm* extensions * Support disas for Z*inx extensions * Remove unused decomp_rv32/64 value for vector instructions * Enable PC-relative translation * Assume M-mode FW in pflash0 only when "-bios none" * Support using pflash via -blockdev option * Add vector registers to log * Clean up reference of Vector MTYPE * Remove the check for extra Vector tail elements * Smepmp: Return error when access permission not allowed in PMP * Fixes for smsiaddrcfg and smsiaddrcfgh in AIA # -----BEGIN PGP SIGNATURE----- # # iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmSJFRoACgkQr3yVEwxT # gBMUkg/8Cuhqpx+zy7MeouVkyhEjUuhtCWyr0WVZBJzDkVEOrlY6TyR0hb5/o1Js # LZf6ZMF6JQDN78bmUct8yFBZBGafey5tyonDCsnD7CNQuLPf2NSjTHhu9n5hKFqF # F8Mpn9iFu6k1pr0iF7FbCccVWuDb3P4h2PaM0iFhmf4uz42BCMYdgJThhvv38xlt # jr6A3dcjTpp8yB+iRCuhL2IU2XVee0XBiDUECqRXd0gmtOtqJNST8L+l8YkLy1VO # WUMe8RCO6NMP7BLJ383WwCDeiFTo0mJebZQ0eR/G1xEhy7c8BBMh/CgQmq2F3wDZ # Q0biaeozADgAaCC7aOAHI+1sAoMhOm1v2WhIVmh+XXUqT9856cKwc7DUPBmzb9Sj # N5Zh+t9WCnZG7qpfxvkDF0Y/aRODMHZ1BW5L/ky9yBtyuRwXOJ6VycZTFyRkSwnN # Gd/s9IClDOP1IP5s4TSMGGdelk4lH97x7fZE/2hxn59lp761JtMxbaEceBtqaBh8 # zNMTNN/KHs8LeiIBI2ZZ+nQav452Y6XYBivQ7OdsI8xkjnjG9gfgXXjvX1TIh0ow # Hy5ZxtAtjXty49Gmjkx5VcBx4auJcnRDlLTzoZjTxq1te+gEWpw6O1EsEKasVLZe # uN6PxTOxS3nHvRvPgQc1xNUdhDRqBaYsju6b9YmMxz1uefAjGM0= # =fOTc # -----END PGP SIGNATURE----- # gpg: Signature made Wed 14 Jun 2023 03:17:14 AM CEST # gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013 # gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013 * tag 'pull-riscv-to-apply-20230614' of https://github.com/alistair23/qemu: (60 commits) hw/intc: If mmsiaddrcfgh.L == 1, smsiaddrcfg and smsiaddrcfgh are read-only. target/riscv: Smepmp: Return error when access permission not allowed in PMP target/riscv/vector_helper.c: Remove the check for extra tail elements target/riscv/vector_helper.c: clean up reference of MTYPE target/riscv: Fix initialized value for cur_pmmask util/log: Add vector registers to log docs/system: riscv: Add pflash usage details riscv/virt: Support using pflash via -blockdev option hw/riscv: virt: Assume M-mode FW in pflash0 only when "-bios none" target/riscv: Remove pc_succ_insn from DisasContext target/riscv: Enable PC-relative translation target/riscv: Use true diff for gen_pc_plus_diff target/riscv: Change gen_set_pc_imm to gen_update_pc target/riscv: Change gen_goto_tb to work on displacements target/riscv: Introduce cur_insn_len into DisasContext target/riscv: Fix target address to update badaddr disas/riscv.c: Remove redundant parentheses disas/riscv.c: Fix lines with over 80 characters disas/riscv.c: Remove unused decomp_rv32/64 value for vector instructions disas/riscv.c: Support disas for Z*inx extensions ... Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-13hw/char/parallel-isa: Export struct ISAParallelStateBernhard Beschow
Allows the struct to be embedded directly into device models without additional allocation. Suggested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230612081238.1742-3-shentey@gmail.com> [PMD: Update MAINTAINERS entry and use SPDX license identifier] Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-06-13hw/char/parallel: Export struct ParallelStateBernhard Beschow
Exporting ParallelState is a precondition for exporing TYPE_ISA_PARALLEL to be performed in the next patch. Suggested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230612081238.1742-2-shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-06-13util/log: Add vector registers to logIvan Klokov
Added QEMU option 'vpu' to log vector extension registers such as gpr\fpu. Signed-off-by: Ivan Klokov <ivan.klokov@syntacore.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230410124451.15929-2-ivan.klokov@syntacore.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-06-13hw/riscv/opentitan: Correct OpenTitanState parent type/sizePhilippe Mathieu-Daudé
OpenTitanState is the 'machine' (or 'board') state: it isn't a SysBus device, but inherits from the MachineState type. Correct the instance size. Doing so we avoid leaking an OpenTitanState pointer in opentitan_machine_init(). Fixes: fe0fe4735e ("riscv: Initial commit of OpenTitan machine") Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-Id: <20230520054510.68822-6-philmd@linaro.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-06-13hw/riscv/opentitan: Explicit machine type definitionPhilippe Mathieu-Daudé
Expand the DEFINE_MACHINE() macro, converting the class_init() handler. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-Id: <20230520054510.68822-5-philmd@linaro.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-06-13hw/riscv/opentitan: Add TYPE_OPENTITAN_MACHINE definitionPhilippe Mathieu-Daudé
QOM type names are usually defined as TYPE_FOO. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-Id: <20230520054510.68822-4-philmd@linaro.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-06-10hw/ppc/openpic: Do not open-code ROUND_UP() macroPhilippe Mathieu-Daudé
While reviewing, the ROUND_UP() macro is easier to figure out. Besides, the comment confirms we want to round up here. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-Id: <20230523061546.49031-1-philmd@linaro.org> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2023-06-10pnv/xive2: Introduce macros to manipulate TIMA addressesFrederic Barrat
TIMA addresses are somewhat special and are split in several bit fields with different meanings. This patch describes it and introduce macros to more easily access the various fields. Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20230601121331.487207-5-fbarrat@linux.ibm.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2023-06-07hw/isa/piix3: Resolve redundant TYPE_PIIX3_XEN_DEVICEBernhard Beschow
During the last patches, TYPE_PIIX3_XEN_DEVICE turned into a clone of TYPE_PIIX3_DEVICE. Remove this redundancy. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Anthony PERARD <anthony.perard@citrix.com> Tested-by: Chuck Zmudzinski <brchuckz@aol.com> Message-Id: <20230312120221.99183-7-shentey@gmail.com> Message-Id: <20230403074124.3925-8-shentey@gmail.com> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
2023-06-07include/hw/xen/xen: Rename xen_piix3_set_irq() to xen_intx_set_irq()Bernhard Beschow
xen_piix3_set_irq() isn't PIIX specific: PIIX is a single PCI device while xen_piix3_set_irq() maps multiple PCI devices to their respective IRQs, which is board-specific. Rename xen_piix3_set_irq() to communicate this. Also rename XEN_PIIX_NUM_PIRQS to XEN_IOAPIC_NUM_PIRQS since the Xen's IOAPIC rather than PIIX has this many interrupt routes. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Anthony PERARD <anthony.perard@citrix.com> Tested-by: Chuck Zmudzinski <brchuckz@aol.com> Message-Id: <20230312120221.99183-2-shentey@gmail.com> Message-Id: <20230403074124.3925-2-shentey@gmail.com> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
2023-06-07xen: Drop support for Xen versions below 4.7.1David Woodhouse
In restructuring to allow for internal emulation of Xen functionality, I broke compatibility for Xen 4.6 and earlier. Fix this by explicitly removing support for anything older than 4.7.1, which is also ancient but it does still build, and the compatibility support for it is fairly unintrusive. Fixes: 15e283c5b684 ("hw/xen: Add foreignmem operations to allow redirection to internal emulation") Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Paul Durrant <paul@xen.org> Message-Id: <20230412185102.441523-4-dwmw2@infradead.org> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
2023-06-06hw: arm: allwinner-sramc: Add SRAM Controller support for R40qianfan Zhao
Only a few important registers are added, especially the SRAM_VER register. Signed-off-by: qianfan Zhao <qianfanguijin@163.com> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-06hw: arm: allwinner-r40: Add emac and gmac supportqianfan Zhao
R40 has two ethernet controllers named as emac and gmac. The emac is compatibled with A10, and the GMAC is compatibled with H3. Signed-off-by: qianfan Zhao <qianfanguijin@163.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-06hw: sd: allwinner-sdhost: Add sun50i-a64 SoC supportqianfan Zhao
A64's sd register was similar to H3, and it introduced a new register named SAMP_DL_REG location at 0x144. The dma descriptor buffer size of mmc2 is only 8K and the other mmc controllers has 64K. Also fix allwinner-r40's mmc controller type. Signed-off-by: qianfan Zhao <qianfanguijin@163.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-06hw/arm/allwinner-r40: add SDRAM controller deviceqianfan Zhao
Types of memory that the SDRAM controller supports are DDR2/DDR3 and capacities of up to 2GiB. This commit adds emulation support of the Allwinner R40 SDRAM controller. This driver only support 256M, 512M and 1024M memory now. Signed-off-by: qianfan Zhao <qianfanguijin@163.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-06hw: arm: allwinner-r40: Add i2c0 deviceqianfan Zhao
TWI(i2c) is designed to be used as an interface between CPU host and the serial 2-Wire bus. It can support all standard 2-Wire transfer, can be operated in standard mode(100kbit/s) or fast-mode, supporting data rate up to 400kbit/s. Signed-off-by: qianfan Zhao <qianfanguijin@163.com> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-06hw: allwinner-r40: Complete uart devicesqianfan Zhao
R40 has eight UARTs, support both 16450 and 16550 compatible modes. Signed-off-by: qianfan Zhao <qianfanguijin@163.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-06hw/arm/allwinner-r40: add Clock Control Unitqianfan Zhao
The CCU provides the registers to program the PLLs and the controls most of the clock generation, division, distribution, synchronization and gating. This commit adds support for the Clock Control Unit which emulates a simple read/write register interface. Signed-off-by: qianfan Zhao <qianfanguijin@163.com> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-06hw: arm: Add bananapi M2-Ultra and allwinner-r40 supportqianfan Zhao
Allwinner R40 (sun8i) SoC features a Quad-Core Cortex-A7 ARM CPU, and a Mali400 MP2 GPU from ARM. It's also known as the Allwinner T3 for In-Car Entertainment usage, A40i and A40pro are variants that differ in applicable temperatures range (industrial and military). Signed-off-by: qianfan Zhao <qianfanguijin@163.com> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-06xlnx-versal: Connect Xilinx VERSAL CANFD controllersVikram Garhwal
Connect CANFD0 and CANFD1 on the Versal-virt machine and update xlnx-versal-virt document with CANFD command line examples. Signed-off-by: Vikram Garhwal <vikram.garhwal@amd.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-06hw/net/can: Introduce Xilinx Versal CANFD controllerVikram Garhwal
The Xilinx Versal CANFD controller is developed based on SocketCAN, QEMU CAN bus implementation. Bus connection and socketCAN connection for each CAN module can be set through command lines. Signed-off-by: Vikram Garhwal <vikram.garhwal@amd.com> Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-05Merge tag 'qemu-sparc-20230605' of https://github.com/mcayland/qemu into stagingRichard Henderson
qemu-sparc queue # -----BEGIN PGP SIGNATURE----- # # iQFSBAABCgA8FiEEzGIauY6CIA2RXMnEW8LFb64PMh8FAmR9xHseHG1hcmsuY2F2 # ZS1heWxhbmRAaWxhbmRlLmNvLnVrAAoJEFvCxW+uDzIfFsgH/0lV2y9CphGdWwtV # S/00CRhp5n0kv3P2m4yDvXBhBgMa8zS6m/ZHhcfuU5xOxkJAnPudvXiZucHP4TSy # 6KFBgVi2+xBW1YJf2UEHlBG2cDnVDHtYQze6Ak3S+W5sVeZZU8n1k8k8kRwpuNDS # io23oKXzzKMYErlwy12bEHEF7vpfcG9HktjpJxUtppkNDuPTysyKSA6BavEm3mJC # MlIypbxqxgBvu2SJETeP/m1yLQOaswViCNkqNqUH+MgEc1ubtSCXEuXTfSHIsxLR # 224kRPFciY1sm3NvG9yz75UYSq1JUvUC5mNIIqwjb4MZJ+YHqFb3S/6ilCYChQ8V # IBPyvH0= # =pxbI # -----END PGP SIGNATURE----- # gpg: Signature made Mon 05 Jun 2023 04:18:19 AM PDT # gpg: using RSA key CC621AB98E82200D915CC9C45BC2C56FAE0F321F # gpg: issuer "mark.cave-ayland@ilande.co.uk" # gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: CC62 1AB9 8E82 200D 915C C9C4 5BC2 C56F AE0F 321F * tag 'qemu-sparc-20230605' of https://github.com/mcayland/qemu: hw/isa/i82378: Remove unused "io" attribute hw/arm/omap: Remove unused omap_uart_attach() hw/timer/i8254_common: Share "iobase" property via base class Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-05hw/arm/omap: Remove unused omap_uart_attach()Bernhard Beschow
The function is unused since commit bdad3654d3c55f478e538037d9eccd204e5fc8ee ('hw/arm/nseries: Remove invalid/unnecessary n8x0_uart_setup()'). Signed-off-by: Bernhard Beschow <shentey@gmail.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230523195608.125820-3-shentey@gmail.com> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2023-06-05hw/intc/loongarch_ipi: Bring back all 4 IPI mailboxesJiaxun Yang
As per "Loongson 3A5000/3B5000 Processor Reference Manual", Loongson 3A5000's IPI implementation have 4 mailboxes per core. However, in 78464f023b54 ("hw/loongarch/virt: Modify ipi as percpu device"), the number of IPI mailboxes was reduced to one, which mismatches actual hardware. It won't affect LoongArch based system as LoongArch boot code only uses the first mailbox, however MIPS based Loongson boot code uses all 4 mailboxes. Fixes Coverity CID: 1512452, 1512453 Fixes: 78464f023b54 ("hw/loongarch/virt: Modify ipi as percpu device") Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Reviewed-by: Song Gao <gaosong@loongson.cn> Message-Id: <20230521102307.87081-2-jiaxun.yang@flygoat.com> Signed-off-by: Song Gao <gaosong@loongson.cn>
2023-06-01tcg: remove the final vestiges of dstateAlex Bennée
Now we no longer have dynamic state affecting things we can remove the additional fields in cpu.h and simplify the TB hash calculation. For the benchmark: hyperfine -w 2 -m 20 \ "./arm-softmmu/qemu-system-arm -cpu cortex-a15 \ -machine type=virt,highmem=off \ -display none -m 2048 \ -serial mon:stdio \ -netdev user,id=unet,hostfwd=tcp::2222-:22 \ -device virtio-net-pci,netdev=unet \ -device virtio-scsi-pci \ -blockdev driver=raw,node-name=hd,discard=unmap,file.driver=host_device,file.filename=/dev/zen-disk/debian-bullseye-armhf \ -device scsi-hd,drive=hd -smp 4 \ -kernel /home/alex/lsrc/linux.git/builds/arm/arch/arm/boot/zImage \ -append 'console=ttyAMA0 root=/dev/sda2 systemd.unit=benchmark.service' \ -snapshot" It has a marginal effect on runtime, before: Time (mean ± σ): 26.279 s ± 2.438 s [User: 41.113 s, System: 1.843 s] Range (min … max): 24.420 s … 32.565 s 20 runs after: Time (mean ± σ): 24.440 s ± 2.885 s [User: 34.474 s, System: 2.028 s] Range (min … max): 21.663 s … 29.937 s 20 runs Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1358 Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20230526165401.574474-10-alex.bennee@linaro.org Message-Id: <20230524133952.3971948-9-alex.bennee@linaro.org> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2023-05-30Merge tag 'for-upstream' of https://repo.or.cz/qemu/kevin into stagingRichard Henderson
Block layer patches - Fix blockdev-create with iothreads - Remove aio_disable_external() API # -----BEGIN PGP SIGNATURE----- # # iQJFBAABCAAvFiEE3D3rFZqa+V09dFb+fwmycsiPL9YFAmR2JIARHGt3b2xmQHJl # ZGhhdC5jb20ACgkQfwmycsiPL9brtA/9HVdAdtJxW78J60TE2lTqE9XlqMOEHBZl # 8GN72trjP2geY/9mVsv/XoFie4ecqFsYjwAWWUuXZwLgAo53jh7oFN7gBH5iGyyD # +EukYEfjqoykX5BkoK0gbMZZUe5Y4Dr2CNXYw4bNg8kDzj2RLifGA1XhdL3HoiVt # PHZrhwBR7ddww6gVOnyJrfGL8fMkW/ZNeKRhrTZuSP+63oDOeGTsTumD+YKJzfPs # p5WlwkuPjcqbO+w32FeVOHVhNI4swkN5svz3fkr8NuflfA7kH6nBQ5wymObbaTLc # Erx03lrtP1+6nw43V11UnYt6iDMg4EBUQwtzNaKFnk3rMIdjoQYxIM5FTBWL2rYD # Dg6PhkncXQ1WNWhUaFqpTFLB52XAYsSa4/y2QAGP6nWbqAUAUknQ3exaMvWiq7Z0 # nZeyyhIWvpJIHGCArWRdqqh+zsBdsmUVuPGyZnZgL/cXoJboYiHMyMJSUWE0XxML # NGrncwxdsBXkVGGwTdHpBT64dcu3ENRgwtraqRLQm+tp5MKNTJB/+Ug2/p1vonHT # UOoHz//UPskn8sHIyevoHXeu2Ns0uIHzrAXr+7Ay+9UYyIH6a07F4b2BGqkfyi/i # 8wQsDmJ/idx5C4q1+jS+GuIbpnjIx6nxXwXMqpscUXZmM4Am8OMkiKxQAa1wExGF # paId+HHwyks= # =yuER # -----END PGP SIGNATURE----- # gpg: Signature made Tue 30 May 2023 09:29:52 AM PDT # gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6 # gpg: issuer "kwolf@redhat.com" # gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full] * tag 'for-upstream' of https://repo.or.cz/qemu/kevin: (32 commits) aio: remove aio_disable_external() API virtio: do not set is_external=true on host notifiers virtio-scsi: implement BlockDevOps->drained_begin() virtio-blk: implement BlockDevOps->drained_begin() virtio: make it possible to detach host notifier from any thread block/fuse: do not set is_external=true on FUSE fd block/export: don't require AioContext lock around blk_exp_ref/unref() block/export: rewrite vduse-blk drain code hw/xen: do not set is_external=true on evtchn fds xen-block: implement BlockDevOps->drained_begin() block: drain from main loop thread in bdrv_co_yield_to_drain() block: add blk_in_drain() API hw/xen: do not use aio_set_fd_handler(is_external=true) in xen_xenstore block/export: stop using is_external in vhost-user-blk server block/export: wait for vhost-user-blk requests when draining util/vhost-user-server: rename refcount to in_flight counter virtio-scsi: stop using aio_disable_external() during unplug virtio-scsi: avoid race between unplug and transport event hw/qdev: introduce qdev_is_realized() helper block-backend: split blk_do_set_aio_context() ... Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-05-30virtio-scsi: implement BlockDevOps->drained_begin()Stefan Hajnoczi
The virtio-scsi Host Bus Adapter provides access to devices on a SCSI bus. Those SCSI devices typically have a BlockBackend. When the BlockBackend enters a drained section, the SCSI device must temporarily stop submitting new I/O requests. Implement this behavior by temporarily stopping virtio-scsi virtqueue processing when one of the SCSI devices enters a drained section. The new scsi_device_drained_begin() API allows scsi-disk to message the virtio-scsi HBA. scsi_device_drained_begin() uses a drain counter so that multiple SCSI devices can have overlapping drained sections. The HBA only sees one pair of .drained_begin/end() calls. After this commit, virtio-scsi no longer depends on hw/virtio's ioeventfd aio_set_event_notifier(is_external=true). This commit is a step towards removing the aio_disable_external() API. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20230516190238.8401-19-stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2023-05-30hw/qdev: introduce qdev_is_realized() helperStefan Hajnoczi
Add a helper function to check whether the device is realized without requiring the Big QEMU Lock. The next patch adds a second caller. The goal is to avoid spreading DeviceState field accesses throughout the code. Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20230516190238.8401-3-stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2023-05-30hw/arm/smmuv3: Add knob to choose translation stage and enable stage-2Mostafa Saleh
As everything is in place, we can use a new system property to advertise which stage is supported and remove bad_ste from STE stage2 config. The property added arm-smmuv3.stage can have 3 values: - "1": Stage-1 only is advertised. - "2": Stage-2 only is advertised. If not passed or an unsupported value is passed, it will default to stage-1. Advertise VMID16. Don't try to decode CD, if stage-2 is configured. Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Mostafa Saleh <smostafa@google.com> Tested-by: Eric Auger <eric.auger@redhat.com> Tested-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Message-id: 20230516203327.2051088-11-smostafa@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-05-30hw/arm/smmuv3: Add CMDs related to stage-2Mostafa Saleh
CMD_TLBI_S2_IPA: As S1+S2 is not enabled, for now this can be the same as CMD_TLBI_NH_VAA. CMD_TLBI_S12_VMALL: Added new function to invalidate TLB by VMID. For stage-1 only commands, add a check to throw CERROR_ILL if used when stage-1 is not supported. Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Mostafa Saleh <smostafa@google.com> Tested-by: Eric Auger <eric.auger@redhat.com> Tested-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Message-id: 20230516203327.2051088-9-smostafa@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-05-30hw/arm/smmuv3: Add VMID to TLB taggingMostafa Saleh
Allow TLB to be tagged with VMID. If stage-1 is only supported, VMID is set to -1 and ignored from STE and CMD_TLBI_NH* cmds. Update smmu_iotlb_insert trace event to have vmid. Signed-off-by: Mostafa Saleh <smostafa@google.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Tested-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Message-id: 20230516203327.2051088-8-smostafa@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-05-30hw/arm/smmuv3: Parse STE config for stage-2Mostafa Saleh
Parse stage-2 configuration from STE and populate it in SMMUS2Cfg. Validity of field values are checked when possible. Only AA64 tables are supported and Small Translation Tables (STT) are not supported. According to SMMUv3 UM(IHI0070E) "5.2 Stream Table Entry": All fields with an S2 prefix (with the exception of S2VMID) are IGNORED when stage-2 bypasses translation (Config[1] == 0). Which means that VMID can be used(for TLB tagging) even if stage-2 is bypassed, so we parse it unconditionally when S2P exists. Otherwise it is set to -1.(only S1P) As stall is not supported, if S2S is set the translation would abort. For S2R, we reuse the same code used for stage-1 with flag record_faults. However when nested translation is supported we would need to separate stage-1 and stage-2 faults. Fix wrong shift in STE_S2HD, STE_S2HA, STE_S2S. Signed-off-by: Mostafa Saleh <smostafa@google.com> Tested-by: Eric Auger <eric.auger@redhat.com> Tested-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 20230516203327.2051088-6-smostafa@google.com [PMM: fixed format string] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-05-30hw/arm/smmuv3: Refactor stage-1 PTWMostafa Saleh
In preparation for adding stage-2 support, rename smmu_ptw_64 to smmu_ptw_64_s1 and refactor some of the code so it can be reused in stage-2 page table walk. Remove AA64 check from PTW as decode_cd already ensures that AA64 is used, otherwise it faults with C_BAD_CD. A stage member is added to SMMUPTWEventInfo to differentiate between stage-1 and stage-2 ptw faults. Add stage argument to trace_smmu_ptw_level be consistent with other trace events. Signed-off-by: Mostafa Saleh <smostafa@google.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Tested-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Message-id: 20230516203327.2051088-4-smostafa@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-05-30hw/arm/smmuv3: Update translation config to hold stage-2Mostafa Saleh
In preparation for adding stage-2 support, add a S2 config struct(SMMUS2Cfg), composed of the following fields and embedded in the main SMMUTransCfg: -tsz: Size of IPA input region (S2T0SZ) -sl0: Start level of translation (S2SL0) -affd: AF Fault Disable (S2AFFD) -record_faults: Record fault events (S2R) -granule_sz: Granule page shift (based on S2TG) -vmid: Virtual Machine ID (S2VMID) -vttb: Address of translation table base (S2TTB) -eff_ps: Effective PA output range (based on S2PS) They will be used in the next patches in stage-2 address translation. The fields in SMMUS2Cfg, are reordered to make the shared and stage-1 fields next to each other, this reordering didn't change the struct size (104 bytes before and after). Stage-1 only fields: aa64, asid, tt, ttb, tbi, record_faults, oas. oas is stage-1 output address size. However, it is used to check input address in case stage-1 is unimplemented or bypassed according to SMMUv3 manual IHI0070.E "3.4. Address sizes" Shared fields: stage, disabled, bypassed, aborted, iotlb_*. No functional change intended. Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Mostafa Saleh <smostafa@google.com> Tested-by: Eric Auger <eric.auger@redhat.com> Tested-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Message-id: 20230516203327.2051088-3-smostafa@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-05-30fsl-imx6: Add SNVS support for i.MX6 boardsVitaly Cheptsov
SNVS is supported on both i.MX6 and i.MX6UL and is needed to support shutdown on the board. Cc: Peter Maydell <peter.maydell@linaro.org> (odd fixer:SABRELITE / i.MX6) Cc: Jean-Christophe Dubois <jcd@tribudubois.net> (reviewer:SABRELITE / i.MX6) Cc: qemu-arm@nongnu.org (open list:SABRELITE / i.MX6) Cc: qemu-devel@nongnu.org (open list:All patches CC here) Signed-off-by: Vitaly Cheptsov <cheptsov@ispras.ru> Message-id: 20230515095015.66860-1-cheptsov@ispras.ru Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-05-29Merge tag 'pull-ppc-20230528' of https://gitlab.com/danielhb/qemu into stagingRichard Henderson
ppc patch queue for 2023-05-28: This queue includes several assorted fixes for PowerPC SPR emulation, a change in the default Pegasos2 CPU, the addition of AIL mode 3 for spapr, a PIC->CPU interrupt fix for prep and performance enhancements in fpu_helper.c. # -----BEGIN PGP SIGNATURE----- # # iIwEABYKADQWIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCZHOFiRYcZGFuaWVsaGI0 # MTNAZ21haWwuY29tAAoJEDzZypbeAzFkVZ0BAMV+9RlHKRlldOSPMEWCWo6hmA/U # 9SMyJsZPY3OpDbE3AP9XOQR1boqyT5MJXoeOUq1OLlFm6mY7UA300kBZ7wxVCw== # =IGNT # -----END PGP SIGNATURE----- # gpg: Signature made Sun 28 May 2023 09:47:05 AM PDT # gpg: using EDDSA key 17EBFF9923D01800AF2838193CD9CA96DE033164 # gpg: issuer "danielhb413@gmail.com" # gpg: Good signature from "Daniel Henrique Barboza <danielhb413@gmail.com>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 17EB FF99 23D0 1800 AF28 3819 3CD9 CA96 DE03 3164 * tag 'pull-ppc-20230528' of https://gitlab.com/danielhb/qemu: ppc/pegasos2: Change default CPU to 7457 target/ppc: Add POWER9 DD2.2 model target/ppc: Merge COMPUTE_CLASS and COMPUTE_FPRF pnv_lpc: disable reentrancy detection for lpc-hc target/ppc: Use SMT4 small core chip type in POWER9/10 PVRs hw/ppc/prep: Fix wiring of PIC -> CPU interrupt spapr: Add SPAPR_CAP_AIL_MODE_3 for AIL mode 3 support for H_SET_MODE hcall target/ppc: Alignment faults do not set DSISR in ISA v3.0 onward target/ppc: Fix width of some 32-bit SPRs target/ppc: Fix fallback to MFSS for MFFS* instructions on pre 3.0 ISAs Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-05-28target/ppc: Add POWER9 DD2.2 modelNicholas Piggin
POWER9 DD2.1 and earlier had significant limitations when running KVM, including lack of "mixed mode" MMU support (ability to run HPT and RPT mode on threads of the same core), and a translation prefetch issue which is worked around by disabling "AIL" mode for the guest. These processors are not widely available, and it's difficult to deal with all these quirks in qemu +/- KVM, so create a POWER9 DD2.2 CPU and make it the default POWER9 CPU. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com> Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com> Message-Id: <20230515160201.394587-1-npiggin@gmail.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2023-05-28spapr: Add SPAPR_CAP_AIL_MODE_3 for AIL mode 3 support for H_SET_MODE hcallNicholas Piggin
The behaviour of the Address Translation Mode on Interrupt resource is not consistently supported by all CPU versions or all KVM versions: KVM HV does not support mode 2, and does not support mode 3 on POWER7 or early POWER9 processesors. KVM PR only supports mode 0. TCG supports all modes (0, 2, 3) on CPUs with support for the corresonding LPCR[AIL] mode. This leads to inconsistencies in guest behaviour and could cause problems migrating guests. This was not noticable for Linux guests for a long time because the kernel only uses modes 0 and 3, and it used to consider AIL-3 to be advisory in that it would always keep the AIL-0 vectors around, so it did not matter whether or not interrupts were delivered according to the AIL mode. Recent Linux guests depend on AIL mode 3 working as specified in order to support the SCV facility interrupt. If AIL-3 can not be provided, then H_SET_MODE must return an error to Linux so it can disable the SCV facility (failure to do so can lead to userspace being able to crash the guest kernel). Add the ail-mode-3 capability to specify that AIL-3 is supported. AIL-0 is implied as the baseline, and AIL-2 is no longer supported by spapr. AIL-2 is not known to be used by any software, but support in TCG could be restored with an ail-mode-2 capability quite easily if a regression is reported. Modify the H_SET_MODE Address Translation Mode on Interrupt resource handler to check capabilities and correctly return error if not supported. KVM has a cap to advertise support for AIL-3. Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Message-Id: <20230515160216.394612-1-npiggin@gmail.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2023-05-28virtio-input: add a virtio-mulitouch deviceSergio Lopez
Add a virtio-multitouch device to the family of devices emulated by virtio-input implementing the Multi-touch protocol as descripted here: https://www.kernel.org/doc/html/latest/input/multi-touch-protocol.html?highlight=multi+touch This patch just add the device itself, without connecting it to any backends. The following patches will add a PCI-based multitouch device, some helpers in "ui" and will enable the GTK3 backend to transpose multi-touch events from the host to the guest. Signed-off-by: Sergio Lopez <slp@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20230526112925.38794-4-slp@redhat.com>
2023-05-22hw/char/parallel: Move TYPE_ISA_PARALLEL to the header fileThomas Huth
We are going to require the macro from other files, too, so move this #define to the header file. Message-Id: <20230512124033.502654-9-thuth@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-05-22hw: Move the default NIC machine class setting from the x86 to the generic oneThomas Huth
We are going to re-use this setting for other targets, so let's move this to the main MachineClass. Message-Id: <20230512124033.502654-4-thuth@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-05-19hw/i386/pc: No need for rtc_state to be an out-parameterBernhard Beschow
Now that the RTC is created as part of the southbridges it doesn't need to be an out-parameter any longer. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230519084734.220480-3-shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-17 00:23:13 +0000