aboutsummaryrefslogtreecommitdiff
path: root/include/hw
AgeCommit message (Collapse)Author
2021-09-01hw/arm/msf2: Use Clock input to MSF2_SOC instead of m3clk propertyPeter Maydell
Instead of passing the MSF2 SoC an integer property specifying the CPU clock rate, pass it a Clock instead. This lets us wire that clock up to the armv7m object. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alexandre Iooss <erdnaxe@crans.org> Message-id: 20210812093356.1946-20-peter.maydell@linaro.org
2021-09-01hw/arm/msf2_soc: Don't allocate separate MemoryRegionsPeter Maydell
In the realize method of the msf2-soc SoC object, we call g_new() to create new MemoryRegion objects for the nvm, nvm_alias, and sram. This is unnecessary; make these MemoryRegions member fields of the device state struct instead. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alexandre Iooss <erdnaxe@crans.org> Message-id: 20210812093356.1946-19-peter.maydell@linaro.org
2021-09-01hw/arm/nrf51: Wire up sysclkPeter Maydell
Wire up the sysclk input to the armv7m object. Strictly this SoC should not have a systick device at all, but our armv7m container object doesn't currently support disabling the systick device. For the moment, add a TODO comment, but note that this is why we aren't wiring up a refclk (no need for one). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alexandre Iooss <erdnaxe@crans.org> Message-id: 20210812093356.1946-16-peter.maydell@linaro.org
2021-09-01hw/arm/stm32f405: Wire up sysclk and refclkPeter Maydell
Wire up the sysclk and refclk for the stm32f405 SoC. This SoC always runs the systick refclk at 1/8 the frequency of the main CPU clock, so the board code only needs to provide a single sysclk clock. Because there is only one board using this SoC, we convert the SoC and the board together, rather than splitting it into "add clock to SoC; connect clock in board; add error check in SoC code that clock is wired up". When the systick device starts honouring its clock inputs, this will fix an emulation inaccuracy in the netduinoplus2 board where the systick reference clock was running at 1MHz rather than 21MHz. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Alexandre Iooss <erdnaxe@crans.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Message-id: 20210812093356.1946-14-peter.maydell@linaro.org
2021-09-01hw/arm/stm32f205: Wire up sysclk and refclkPeter Maydell
Wire up the sysclk and refclk for the stm32f205 SoC. This SoC always runs the systick refclk at 1/8 the frequency of the main CPU clock, so the board code only needs to provide a single sysclk clock. Because there is only one board using this SoC, we convert the SoC and the board together, rather than splitting it into "add clock to SoC; connect clock in board; add error check in SoC code that clock is wired up". When the systick device starts honouring its clock inputs, this will fix an emulation inaccuracy in the netduino2 board where the systick reference clock was running at 1MHz rather than 15MHz. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Alexandre Iooss <erdnaxe@crans.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Message-id: 20210812093356.1946-13-peter.maydell@linaro.org
2021-09-01hw/arm/stm32f100: Wire up sysclk and refclkPeter Maydell
Wire up the sysclk and refclk for the stm32f100 SoC. This SoC always runs the systick refclk at 1/8 the frequency of the main CPU clock, so the board code only needs to provide a single sysclk clock. Because there is only one board using this SoC, we convert the SoC and the board together, rather than splitting it into "add clock to SoC; connect clock in board; add error check in SoC code that clock is wired up". When the systick device starts honouring its clock inputs, this will fix an emulation inaccuracy in the stm32vldiscovery board where the systick reference clock was running at 1MHz rather than 3MHz. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Alexandre Iooss <erdnaxe@crans.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Message-id: 20210812093356.1946-12-peter.maydell@linaro.org
2021-09-01hw/arm: Don't allocate separate MemoryRegions in stm32 SoC realizePeter Maydell
In the realize methods of the stm32f100 and stm32f205 SoC objects, we call g_new() to create new MemoryRegion objects for the sram, flash, and flash_alias. This is unnecessary (and leaves open the possibility of leaking the allocations if we exit from realize with an error). Make these MemoryRegions member fields of the device state struct instead, as stm32f405 already does. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alexandre Iooss <erdnaxe@crans.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Luc Michel <luc@lmichel.fr> Message-id: 20210812093356.1946-11-peter.maydell@linaro.org
2021-09-01clock: Provide builtin multiplier/dividerPeter Maydell
It is quite common for a clock tree to involve possibly programmable clock multipliers or dividers, where the frequency of a clock is for instance divided by 8 to produce a slower clock to feed to a particular device. Currently we provide no convenient mechanism for modelling this. You can implement it by having an input Clock and an output Clock, and manually setting the period of the output clock in the period-changed callback of the input clock, but that's quite clunky. This patch adds support in the Clock objects themselves for setting a multiplier or divider. The effect of setting this on a clock is that when the clock's period is changed, all the children of the clock are set to period * multiplier / divider, rather than being set to the same period as the parent clock. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alexandre Iooss <erdnaxe@crans.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Reviewed-by: Damien Hedde <damien.hedde@greensocs.com> Message-id: 20210812093356.1946-10-peter.maydell@linaro.org
2021-09-01hw/arm/armv7m: Create input clocksPeter Maydell
Create input clocks on the armv7m container object which pass through to the systick timers, so that users of the armv7m object can specify the clocks being used. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Luc Michel <luc@lmichel.fr> Message-id: 20210812093356.1946-7-peter.maydell@linaro.org
2021-09-01hw/timer/armv7m_systick: Add input clocksPeter Maydell
The v7M systick timer can be programmed to run from either of two clocks: * an "external reference clock" (when SYST_CSR.CLKSOURCE == 0) * the main CPU clock (when SYST_CSR.CLKSOURCE == 1) Our implementation currently hardwires the external reference clock to be 1MHz, and allows boards to set the main CPU clock frequency via the global 'system_clock_scale'. (Most boards set that to a constant value; the Stellaris boards allow the guest to reprogram it via the board-specific RCC registers). As the first step in converting this to use the Clock infrastructure, add input clocks to the systick device for the reference clock and the CPU clock. The device implementation ignores them; once we have made all the users of the device correctly wire up the new Clocks we will switch the implementation to use them and ignore the old system_clock_scale. This is a migration compat break for all M-profile boards, because of the addition of the new clock objects to the vmstate struct. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Luc Michel <luc@lmichel.fr> Message-id: 20210812093356.1946-6-peter.maydell@linaro.org
2021-09-01hw/timer/armv7m_systick: Add usual QEMU interface commentPeter Maydell
Add the usual-style QEMU interface comment documenting what properties, etc, this device exposes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Luc Michel <luc@lmichel.fr> Message-id: 20210812093356.1946-5-peter.maydell@linaro.org
2021-09-01arm: Move system PPB container handling to armv7mPeter Maydell
Instead of having the NVIC device provide a single sysbus memory region covering the whole of the "System PPB" space, which implements the default behaviour for unimplemented ranges and provides the NS alias window to the sysregs as well as the main sysreg MR, move this handling to the container armv7m device. The NVIC now provides a single memory region which just implements the system registers. This consolidates all the handling of "map various devices in the PPB" into the armv7m container where it belongs. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alexandre Iooss <erdnaxe@crans.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Message-id: 20210812093356.1946-4-peter.maydell@linaro.org
2021-09-01arm: Move systick device creation from NVIC to ARMv7M objectPeter Maydell
There's no particular reason why the NVIC should be owning the SysTick device objects; move them into the ARMv7M container object instead, as part of consolidating the "create the devices which are built into an M-profile CPU and map them into their architected locations in the address space" work into one place. This involves temporarily creating a duplicate copy of the nvic_sysreg_ns_ops struct and its read/write functions (renamed as v7m_sysreg_ns_*), but we will delete the NVIC's copy of this code in a subsequent patch. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Luc Michel <luc@lmichel.fr> Message-id: 20210812093356.1946-3-peter.maydell@linaro.org
2021-09-01arm: Move M-profile RAS register block into its own devicePeter Maydell
Currently we implement the RAS register block within the NVIC device. It isn't really very tightly coupled with the NVIC proper, so instead move it out into a sysbus device of its own and have the top level ARMv7M container create it and map it into memory at the right address. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alexandre Iooss <erdnaxe@crans.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Luc Michel <luc@lmichel.fr> Reviewed-by: Damien Hedde <damien.hedde@greensocs.com> Message-id: 20210812093356.1946-2-peter.maydell@linaro.org
2021-09-01hw: Add compat machines for 6.2Yanan Wang
Add 6.2 machine types for arm/i440fx/q35/s390x/spapr. Signed-off-by: Yanan Wang <wangyanan55@huawei.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Pankaj Gupta <pankaj.gupta@ionos.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-09-01hw/registerfields: Use 64-bit bitfield for FIELD_DP64Joe Komlodi
If we have a field that's wider than 32-bits, we need a data type wide enough to be able to create the bitfield used to deposit the value. Signed-off-by: Joe Komlodi <joe.komlodi@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1626805903-162860-3-git-send-email-joe.komlodi@xilinx.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-09-01hw/core/register: Add more 64-bit utilitiesJoe Komlodi
We already have some utilities to handle 64-bit wide registers, so this just adds some more for: - Initializing 64-bit registers - Extracting and depositing to an array of 64-bit registers Signed-off-by: Joe Komlodi <joe.komlodi@xilinx.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1626805903-162860-2-git-send-email-joe.komlodi@xilinx.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-08-27ppc/xive: Export xive_presenter_notify()Cédric Le Goater
It's generic enough to be used from the XIVE2 router and avoid more duplication. Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20210809134547.689560-9-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-08-27ppc/xive: Export PQ get/set routinesCédric Le Goater
These will be shared with the XIVE2 router. Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20210809134547.689560-8-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-08-27ppc/pnv: Use a simple incrementing index for the chip-idCédric Le Goater
When the QEMU PowerNV machine was introduced, multi chip support modeled a two socket system with dual chip modules as found on some P8 Tuleta systems (8286-42A). But this is hardly used and not relevant for QEMU. Use a simple index instead. With this change, we can now increase the max socket number to 16 as found on high end systems. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20210809134547.689560-5-clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-08-27ppc/pnv: Change the POWER10 machine to support DD2 onlyCédric Le Goater
There is no need to keep the DD1 chip model as it will never be publicly available. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20210809134547.689560-3-clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-08-26hw/arm/xlnx-zynqmp: Add unimplemented APU mmioTong Ho
Add unimplemented APU mmio region to xlnx-zynqmp for booting bare-metal guests built with standalone bsp, which access the region from one of the following places: https://github.com/Xilinx/embeddedsw/blob/release-2020.2/lib/bsp/standalone/src/arm/ARMv8/64bit/armclang/boot.S#L139 https://github.com/Xilinx/embeddedsw/blob/release-2020.2/lib/bsp/standalone/src/arm/ARMv8/64bit/gcc/boot.S#L183 Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Tong Ho <tong.ho@xilinx.com> Message-id: 20210823173818.201259-3-tong.ho@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-08-26hw/arm/xlnx-versal: Add unimplemented APU mmioTong Ho
Add unimplemented APU mmio region to xlnx-versal for booting bare-metal guests built with standalone bsp, which access the region from one of the following places: https://github.com/Xilinx/embeddedsw/blob/release-2020.2/lib/bsp/standalone/src/arm/ARMv8/64bit/armclang/boot.S#L139 https://github.com/Xilinx/embeddedsw/blob/release-2020.2/lib/bsp/standalone/src/arm/ARMv8/64bit/gcc/boot.S#L183 Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Tong Ho <tong.ho@xilinx.com> Message-id: 20210823173818.201259-2-tong.ho@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-08-26hw/dma/xlnx-zdma Always expect 'dma' link property to be setPhilippe Mathieu-Daudé
Simplify by always passing a MemoryRegion property to the device. Doing so we can move the AddressSpace field to the device struct, removing need for heap allocation. Update the Xilinx ZynqMP / Versal SoC models to pass the default system memory instead of a NULL value. Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20210819163422.2863447-5-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-08-26hw/dma/xlnx_csu_dma: Always expect 'dma' link property to be setPhilippe Mathieu-Daudé
Simplify by always passing a MemoryRegion property to the device. Doing so we can move the AddressSpace field to the device struct, removing need for heap allocation. Update the Xilinx ZynqMP SoC model to pass the default system memory instead of a NULL value. Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20210819163422.2863447-4-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-08-25fsl-imx7: Instantiate SAI1/2/3 as unimplemented devicesGuenter Roeck
Instantiate SAI1/2/3 as unimplemented devices to avoid Linux kernel crashes such as the following. Unhandled fault: external abort on non-linefetch (0x808) at 0xd19b0000 pgd = (ptrval) [d19b0000] *pgd=82711811, *pte=308a0653, *ppte=308a0453 Internal error: : 808 [#1] SMP ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.14.0-rc5 #1 ... [<c095e974>] (regmap_mmio_write32le) from [<c095eb48>] (regmap_mmio_write+0x3c/0x54) [<c095eb48>] (regmap_mmio_write) from [<c09580f4>] (_regmap_write+0x4c/0x1f0) [<c09580f4>] (_regmap_write) from [<c0959b28>] (regmap_write+0x3c/0x60) [<c0959b28>] (regmap_write) from [<c0d41130>] (fsl_sai_runtime_resume+0x9c/0x1ec) [<c0d41130>] (fsl_sai_runtime_resume) from [<c0942464>] (__rpm_callback+0x3c/0x108) [<c0942464>] (__rpm_callback) from [<c0942590>] (rpm_callback+0x60/0x64) [<c0942590>] (rpm_callback) from [<c0942b60>] (rpm_resume+0x5cc/0x808) [<c0942b60>] (rpm_resume) from [<c0942dfc>] (__pm_runtime_resume+0x60/0xa0) [<c0942dfc>] (__pm_runtime_resume) from [<c0d4231c>] (fsl_sai_probe+0x2b8/0x65c) [<c0d4231c>] (fsl_sai_probe) from [<c0935b08>] (platform_probe+0x58/0xb8) [<c0935b08>] (platform_probe) from [<c0933264>] (really_probe.part.0+0x9c/0x334) [<c0933264>] (really_probe.part.0) from [<c093359c>] (__driver_probe_device+0xa0/0x138) [<c093359c>] (__driver_probe_device) from [<c0933664>] (driver_probe_device+0x30/0xc8) [<c0933664>] (driver_probe_device) from [<c0933c88>] (__driver_attach+0x90/0x130) [<c0933c88>] (__driver_attach) from [<c0931060>] (bus_for_each_dev+0x78/0xb8) [<c0931060>] (bus_for_each_dev) from [<c093254c>] (bus_add_driver+0xf0/0x1d8) [<c093254c>] (bus_add_driver) from [<c0934a30>] (driver_register+0x88/0x118) [<c0934a30>] (driver_register) from [<c01022c0>] (do_one_initcall+0x7c/0x3a4) [<c01022c0>] (do_one_initcall) from [<c1601204>] (kernel_init_freeable+0x198/0x22c) [<c1601204>] (kernel_init_freeable) from [<c0f5ff2c>] (kernel_init+0x10/0x128) [<c0f5ff2c>] (kernel_init) from [<c010013c>] (ret_from_fork+0x14/0x38) Signed-off-by: Guenter Roeck <linux@roeck-us.net> Message-id: 20210810175607.538090-1-linux@roeck-us.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-07-29ppc/vof: Fix Coverity issuesAlexey Kardashevskiy
Coverity reported issues which are caused by mixing of signed return codes from DTC and unsigned return codes of the client interface. This introduces PROM_ERROR and makes distinction between the error types. This fixes NEGATIVE_RETURNS, OVERRUN issues reported by Coverity. This adds a comment about the return parameters number in the VOF hcall. The reason for such counting is to keep the numbers look the same in vof_client_handle() and the Linux (an OF client). vmc->client_architecture_support() returns target_ulong and we want to propagate this to the client (for example H_MULTI_THREADS_ACTIVE). The VOF path to do_client_architecture_support() needs chopping off the top 32bit but SLOF's H_CAS does not; and either way the return values are either 0 or 32bit negative error code. For now this chops the top 32bits. This makes "claim" fail if the allocated address is above 4GB as the client interface is 32bit. This still allows claiming memory above 4GB as potentially initrd can be put there and the client can read the address from the FDT's "available" property. Fixes: CID 1458139, 1458138, 1458137, 1458133, 1458132 Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Message-Id: <20210720050726.2737405-1-aik@ozlabs.ru> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-07-23Merge remote-tracking branch 'remotes/kraxel/tags/vga-20210723-pull-request' ↵Peter Maydell
into staging vga: fixes for qxl and virtio-gpu # gpg: Signature made Fri 23 Jul 2021 06:54:34 BST # gpg: using RSA key A0328CFFB93A17A79901FE7D4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full] # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full] # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full] # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/vga-20210723-pull-request: hw/display: fix virgl reset regression vl: add virtio-vga-gl to the default_list hw/display: fail early when multiple virgl devices are requested Revert "qxl: add migration blocker to avoid pre-save assert" qxl: remove assert in qxl_pre_save. hw/display/virtio-gpu: Fix memory leak (CID 1453811) Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-07-22hw/display: fix virgl reset regressionMarc-André Lureau
Before commit 49afbca3b00e8e517d54964229a794b51768deaf ("virtio-gpu: drop use_virgl_renderer"), use_virgl_renderer was preventing calling GL functions from non-GL context threads. The innocuously looking g->parent_obj.use_virgl_renderer = false; was set the first time virtio_gpu_gl_reset() was called, during pc_machine_reset() in the main thread. Further virtio_gpu_gl_reset() calls in IO threads, without associated GL context, were thus skipping GL calls and avoided warnings or crashes (see also https://gitlab.freedesktop.org/virgl/virglrenderer/-/issues/226). Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20210702123221.942432-1-marcandre.lureau@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2021-07-21hw/core: Introduce CPUClass.gdb_adjust_breakpointRichard Henderson
This will allow a breakpoint hack to move out of AVR's translator. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-07-21hw/core: Introduce TCGCPUOps.debug_check_breakpointRichard Henderson
New hook to return true when an architectural breakpoint is to be recognized and false when it should be suppressed. First use must wait until other pieces are in place. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-07-19hw/ide: Fix crash when plugging a piix3-ide device into the x-remote machineThomas Huth
QEMU currently crashes when the user tries to do something like: qemu-system-x86_64 -M x-remote -device piix3-ide This happens because the "isabus" variable is not initialized with the x-remote machine yet. Add a proper check for this condition and propagate the error to the caller, so we can fail there gracefully. Message-Id: <20210416125256.2039734-1-thuth@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-07-16Merge remote-tracking branch 'remotes/mst/tags/for_upstream3' into stagingPeter Maydell
pc,pci,virtio: lots of new features Lots of last minute stuff. vhost-user-i2c. vhost-vsock SOCK_SEQPACKET support. IOMMU bypass. ACPI based pci hotplug. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Fri 16 Jul 2021 16:11:27 BST # gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469 # gpg: issuer "mst@redhat.com" # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full] # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full] # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream3: vhost-vsock: SOCK_SEQPACKET feature bit support docs: Add documentation for iommu bypass hw/i386/acpi-build: Add IVRS support to bypass iommu hw/i386/acpi-build: Add DMAR support to bypass iommu hw/arm/virt-acpi-build: Add IORT support to bypass SMMUv3 hw/pci: Add pci_bus_range() to get PCI bus number range hw/i386: Add a default_bus_bypass_iommu pc machine option hw/arm/virt: Add default_bus_bypass_iommu machine option hw/pxb: Add a bypass iommu property hw/pci/pci_host: Allow PCI host to bypass iommu docs: Add '-device intel-iommu' entry hw/virtio: add vhost-user-i2c-pci boilerplate hw/virtio: add boilerplate for vhost-user-i2c device bios-tables-test: Update golden binaries hw/acpi/ich9: Set ACPI PCI hot-plug as default on Q35 bios-tables-test: Allow changes in DSDT ACPI tables hw/pci/pcie: Do not set HPC flag if acpihp is used hw/acpi/ich9: Enable ACPI PCI hot-plug hw/i386/acpi-build: Add ACPI PCI hot-plug methods to Q35 Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-07-16hw/pci: Add pci_bus_range() to get PCI bus number rangeXingang Wang
This helps to get the min and max bus number of a PCI bus hierarchy. Signed-off-by: Xingang Wang <wangxingang5@huawei.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-Id: <1625748919-52456-6-git-send-email-wangxingang5@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-07-16hw/i386: Add a default_bus_bypass_iommu pc machine optionXingang Wang
Add a default_bus_bypass_iommu pc machine option to enable/disable bypass_iommu for default root bus. The option is disabled by default and can be enabled with: $QEMU -machine q35,default_bus_bypass_iommu=true Signed-off-by: Xingang Wang <wangxingang5@huawei.com> Message-Id: <1625748919-52456-5-git-send-email-wangxingang5@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-07-16hw/arm/virt: Add default_bus_bypass_iommu machine optionXingang Wang
Add a default_bus_bypass_iommu machine option to enable/disable bypass_iommu for default root bus. The option is disabled by default and can be enabled with: $QEMU -machine virt,iommu=smmuv3,default_bus_bypass_iommu=true Signed-off-by: Xingang Wang <wangxingang5@huawei.com> Message-Id: <1625748919-52456-4-git-send-email-wangxingang5@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-07-16hw/pci/pci_host: Allow PCI host to bypass iommuXingang Wang
Add a new bypass_iommu property for PCI host and use it to check whether devices attached to the PCI root bus will bypass iommu. In pci_device_iommu_address_space(), check the property and avoid getting iommu address space for devices bypass iommu. Signed-off-by: Xingang Wang <wangxingang5@huawei.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-Id: <1625748919-52456-2-git-send-email-wangxingang5@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-07-16hw/virtio: add boilerplate for vhost-user-i2c deviceViresh Kumar
This creates the QEMU side of the vhost-user-i2c device which connects to the remote daemon. It is based of vhost-user-fs code. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Message-Id: <e80591b52fea4b51631818bb92a798a3daf90399.1625806763.git.viresh.kumar@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-07-16hw/pci/pcie: Do not set HPC flag if acpihp is usedJulia Suvorova
Instead of changing the hot-plug type in _OSC register, do not set the 'Hot-Plug Capable' flag. This way guest will choose ACPI hot-plug if it is preferred and leave the option to use SHPC with pcie-pci-bridge. The ability to control hot-plug for each downstream port is retained, while 'hotplug=off' on the port means all hot-plug types are disabled. Signed-off-by: Julia Suvorova <jusual@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Message-Id: <20210713004205.775386-4-jusual@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-07-16hw/acpi/ich9: Enable ACPI PCI hot-plugJulia Suvorova
Add acpi_pcihp to ich9_pm as part of 'acpi-pci-hotplug-with-bridge-support' option. Set default to false. Signed-off-by: Julia Suvorova <jusual@redhat.com> Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20210713004205.775386-3-jusual@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
2021-07-16hw/i386/acpi-build: Add ACPI PCI hot-plug methods to Q35Julia Suvorova
Implement notifications and gpe to support q35 ACPI PCI hot-plug. Use 0xcc4 - 0xcd7 range for 'acpi-pci-hotplug' io ports. Signed-off-by: Julia Suvorova <jusual@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Message-Id: <20210713004205.775386-2-jusual@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
2021-07-16Merge remote-tracking branch ↵Peter Maydell
'remotes/alistair/tags/pull-riscv-to-apply-20210715' into staging Fourth RISC-V PR for 6.1 release - Code cleanups - Documentation improvements - Hypervisor extension improvements with hideleg and hedeleg - sifive_u fixes - OpenTitan register layout updates - Fix coverity issue # gpg: Signature made Thu 15 Jul 2021 08:14:00 BST # gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054 # gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full] # Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054 * remotes/alistair/tags/pull-riscv-to-apply-20210715: hw/riscv/boot: Check the error of fdt_pack() hw/riscv: opentitan: Add the flash alias hw/riscv: opentitan: Add the unimplement rv_core_ibex_peri char: ibex_uart: Update the register layout hw/riscv: sifive_u: Make sure firmware info is 8-byte aligned hw/riscv: sifive_u: Correct the CLINT timebase frequency docs/system: riscv: Update Microchip Icicle Kit for direct kernel boot target/riscv: hardwire bits in hideleg and hedeleg docs/system: riscv: Add documentation for virt machine docs/system: riscv: Fix CLINT name in the sifive_u doc target/riscv: csr: Remove redundant check in fp csr read/write routines target/riscv: pmp: Fix some typos Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-07-15Merge remote-tracking branch 'remotes/awilliam/tags/vfio-update-20210714.0' ↵Peter Maydell
into staging VFIO update 2021-07-14 * Coverity fix to discard listener (David Hildenbrand) * MSI-X PBA quirk for BAIDU VFs, additional helper use cases (Cai Huoqing) # gpg: Signature made Wed 14 Jul 2021 22:31:35 BST # gpg: using RSA key 42F6C04E540BD1A99E7B8A90239B9B6E3BB08B22 # gpg: issuer "alex.williamson@redhat.com" # gpg: Good signature from "Alex Williamson <alex.williamson@redhat.com>" [full] # gpg: aka "Alex Williamson <alex@shazbot.org>" [full] # gpg: aka "Alex Williamson <alwillia@redhat.com>" [full] # gpg: aka "Alex Williamson <alex.l.williamson@gmail.com>" [full] # Primary key fingerprint: 42F6 C04E 540B D1A9 9E7B 8A90 239B 9B6E 3BB0 8B22 * remotes/awilliam/tags/vfio-update-20210714.0: vfio/pci: Add pba_offset PCI quirk for BAIDU KUNLUN AI processor vfio/pci: Change to use vfio_pci_is() vfio: Fix CID 1458134 in vfio_register_ram_discard_listener() Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-07-15hw/riscv: opentitan: Add the flash aliasAlistair Francis
OpenTitan has an alias of flash avaliable which is called virtual flash. Add support for that in the QEMU model. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-id: c9cfbd2dd840fd0076877b8ea4d6dcfce60db5e9.1625801868.git.alistair.francis@wdc.com
2021-07-15hw/riscv: opentitan: Add the unimplement rv_core_ibex_periAlistair Francis
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-id: ed707782e84118e1b06a32fd79b70fecfb54ff82.1625801868.git.alistair.francis@wdc.com
2021-07-14hw/i386: Introduce X86_FW_OVMF Kconfig symbolPhilippe Mathieu-Daudé
Introduce the X86_FW_OVMF Kconfig symbol for OVMF-specific code. Move the OVMF-specific code from pc_sysfw.c to pc_sysfw_ovmf.c, adding a pair of stubs. Update MAINTAINERS to reach OVMF maintainers when these new files are modified. This fixes when building the microvm machine standalone: /usr/bin/ld: libqemu-i386-softmmu.fa.p/target_i386_monitor.c.o: in function `qmp_sev_inject_launch_secret': target/i386/monitor.c:749: undefined reference to `pc_system_ovmf_table_find' Fixes: f522cef9b35 ("sev: update sev-inject-launch-secret to make gpa optional") Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20210616204328.2611406-22-philmd@redhat.com>
2021-07-14vfio/pci: Add pba_offset PCI quirk for BAIDU KUNLUN AI processorCai Huoqing
Fix pba_offset initialization value for BAIDU KUNLUN Virtual Function device. The KUNLUN hardware returns an incorrect value for the VF PBA offset, and add a quirk to instead return a hardcoded value of 0xb400. Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Link: https://lore.kernel.org/r/20210713093743.942-1-caihuoqing@baidu.com [aw: comment & whitespace tuning] Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2021-07-12Merge remote-tracking branch 'remotes/cohuck-gitlab/tags/s390x-20210708' ↵Peter Maydell
into staging s390x updates: - add gen16 cpumodels - refactor/cleanup some code - bugfixes # gpg: Signature made Thu 08 Jul 2021 12:26:21 BST # gpg: using EDDSA key 69A3B536F5CBFC65208026C1DE88BB5641DE66C1 # gpg: issuer "cohuck@redhat.com" # gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>" [unknown] # gpg: aka "Cornelia Huck <huckc@linux.vnet.ibm.com>" [full] # gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>" [full] # gpg: aka "Cornelia Huck <cohuck@kernel.org>" [unknown] # gpg: aka "Cornelia Huck <cohuck@redhat.com>" [unknown] # Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF # Subkey fingerprint: 69A3 B536 F5CB FC65 2080 26C1 DE88 BB56 41DE 66C1 * remotes/cohuck-gitlab/tags/s390x-20210708: target/s390x: split sysemu part of cpu models target/s390x: move kvm files into kvm/ target/s390x: remove kvm-stub.c target/s390x: use kvm_enabled() to wrap call to kvm_s390_get_hpage_1m target/s390x: make helper.c sysemu-only target/s390x: split cpu-dump from helper.c target/s390x: move sysemu-only code out to cpu-sysemu.c target/s390x: start moving TCG-only code to tcg/ target/s390x: rename internal.h to s390x-internal.h target/s390x: remove tcg-stub.c hw/s390x: only build tod-tcg from the CONFIG_TCG build hw/s390x: tod: make explicit checks for accelerators when initializing hw/s390x: rename tod-qemu.c to tod-tcg.c target/s390x: meson: add target_user_arch s390x/tcg: Fix m5 vs. m4 field for VECTOR MULTIPLY SUM LOGICAL target/s390x: Fix CC set by CONVERT TO FIXED/LOGICAL s390x/cpumodel: add 3931 and 3932 Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-07-11Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into ↵Peter Maydell
staging * More SVM fixes (Lara) * Module annotation database (Gerd) * Memory leak fixes (myself) * Build fixes (myself) * --with-devices-* support (Alex) # gpg: Signature made Fri 09 Jul 2021 17:23:52 BST # gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83 # gpg: issuer "pbonzini@redhat.com" # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini-gitlab/tags/for-upstream: (48 commits) meson: Use input/output for entitlements target configure: allow the selection of alternate config in the build configs: rename default-configs to configs and reorganise hw/arm: move CONFIG_V7M out of default-devices hw/arm: add dependency on OR_IRQ for XLNX_VERSAL meson: Introduce target-specific Kconfig meson: switch function tests from compilation to linking vl: fix leak of qdict_crumple return value target/i386: fix exceptions for MOV to DR target/i386: Added DR6 and DR7 consistency checks target/i386: Added MSRPM and IOPM size check monitor/tcg: move tcg hmp commands to accel/tcg, register them dynamically usb: build usb-host as module monitor/usb: register 'info usbhost' dynamically usb: drop usb_host_dev_is_scsi_storage hook monitor: allow register hmp commands accel: build tcg modular accel: add tcg module annotations accel: build qtest modular accel: add qtest module annotations ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-07-11Merge remote-tracking branch 'remotes/cminyard/tags/for-qemu-6.1-2' into stagingPeter Maydell
Some qemu updates for IPMI and I2C Move some ADC file to where they belong and move some sensors to a sensor directory, since with new BMCs coming in lots of different sensors should be coming in. Keep from cluttering things up. Add support for I2C PMBus devices. Replace the confusing and error-prone i2c_send_recv and i2c_transfer with specific send and receive functions. Several errors have already been made with these, avoid any new errors. Fix the watchdog_expired field in the IPMI watchdog, it's not a bool, it's a u8. After a vmstate transfer, the new value could be wrong. # gpg: Signature made Fri 09 Jul 2021 17:25:04 BST # gpg: using RSA key FD0D5CE67CE0F59A6688268661F38C90919BFF81 # gpg: Good signature from "Corey Minyard <cminyard@mvista.com>" [unknown] # gpg: aka "Corey Minyard <minyard@acm.org>" [unknown] # gpg: aka "Corey Minyard <corey@minyard.net>" [unknown] # gpg: aka "Corey Minyard <minyard@mvista.com>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: FD0D 5CE6 7CE0 F59A 6688 2686 61F3 8C90 919B FF81 * remotes/cminyard/tags/for-qemu-6.1-2: (24 commits) tests/qtest: add tests for MAX34451 device model hw/misc: add MAX34451 device tests/qtest: add tests for ADM1272 device model hw/misc: add ADM1272 device hw/i2c: add support for PMBus ipmi/sim: fix watchdog_expired data type error in IPMIBmcSim struct hw/i2c: Introduce i2c_start_recv() and i2c_start_send() hw/i2c: Extract i2c_do_start_transfer() from i2c_start_transfer() hw/i2c: Make i2c_start_transfer() direction argument a boolean hw/i2c: Rename i2c_set_slave_address() -> i2c_slave_set_address() hw/i2c: Remove confusing i2c_send_recv() hw/misc/auxbus: Replace i2c_send_recv() by i2c_recv() & i2c_send() hw/misc/auxbus: Replace 'is_write' boolean by its value hw/misc/auxbus: Explode READ_I2C / WRITE_I2C_MOT cases hw/misc/auxbus: Fix MOT/classic I2C mode hw/i2c/ppc4xx_i2c: Replace i2c_send_recv() by i2c_recv() & i2c_send() hw/i2c/ppc4xx_i2c: Add reference to datasheet hw/display/sm501: Replace i2c_send_recv() by i2c_recv() & i2c_send() hw/display/sm501: Simplify sm501_i2c_write() logic hw/input/lm832x: Define TYPE_LM8323 in public header ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-16 08:37:07 +0000