aboutsummaryrefslogtreecommitdiff
path: root/include/hw
AgeCommit message (Collapse)Author
2018-06-22hw/intc/arm_gicv3: Introduce redist-region-count array propertyEric Auger
To prepare for multiple redistributor regions, we introduce an array of uint32_t properties that stores the redistributor count of each redistributor region. Non accelerated VGICv3 only supports a single redistributor region. The capacity of all redist regions is checked against the number of vcpus. Machvirt is updated to set those properties, ie. a single redistributor region with count set to the number of vcpus capped by 123. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Message-id: 1529072910-16156-4-git-send-email-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-19Merge remote-tracking branch 'remotes/kraxel/tags/vga-20180618-pull-request' ↵Peter Maydell
into staging vga: add ramfb, print virglrenderer version # gpg: Signature made Mon 18 Jun 2018 10:57:38 BST # gpg: using RSA key 4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/vga-20180618-pull-request: Add ramfb MAINTAINERS entry hw/display: add standalone ramfb device hw/display: add ramfb, a simple boot framebuffer living in guest ram configure: print virglrenderer version Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-18hw/display: add standalone ramfb deviceGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Message-id: 20180613122948.18149-3-kraxel@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-06-18hw/display: add ramfb, a simple boot framebuffer living in guest ramGerd Hoffmann
The boot framebuffer is expected to be configured by the firmware, so it uses fw_cfg as interface. Initialization goes as follows: (1) Check whenever etc/ramfb is present. (2) Allocate framebuffer from RAM. (3) Fill struct RAMFBCfg, write it to etc/ramfb. Done. You can write stuff to the framebuffer now, and it should appear automagically on the screen. Note that this isn't very efficient because it does a full display update on each refresh. No dirty tracking. Dirty tracking would have to be active for the whole ram slot, so that wouldn't be very efficient either. For a boot display which is active for a short time only this isn't a big deal. As permanent guest display something better should be used (if possible). This is the ramfb core code. Some windup is needed for display devices which want have a ramfb boot display. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Message-id: 20180613122948.18149-2-kraxel@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-06-16target/ppc, spapr: Move VPA information to machine_dataDavid Gibson
CPUPPCState currently contains a number of fields containing the state of the VPA. The VPA is a PAPR specific concept covering several guest/host shared memory areas used to communicate some information with the hypervisor. As a PAPR concept this is really machine specific information, although it is per-cpu, so it doesn't really belong in the core CPU state structure. There's also other information that's per-cpu, but platform/machine specific. So create a (void *)machine_data in PowerPCCPU which can be used by the machine to locate per-cpu data. Intialization, lifetime and cleanup of machine_data is entirely up to the machine type. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Greg Kurz <groug@kaod.org> Tested-by: Greg Kurz <groug@kaod.org>
2018-06-16pnv_core: Allocate cpu thread objects individuallyDavid Gibson
Currently, we allocate space for all the cpu objects within a single core in one big block. This was copied from an older version of the spapr code and requires some ugly pointer manipulation to extract the individual objects. This design was due to a misunderstanding of qemu lifetime conventions and has already been changed in spapr (in 94ad93bd "spapr_cpu_core: instantiate CPUs separately". Make an equivalent change in pnv_core to get rid of the nasty pointer arithmetic. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org>
2018-06-16mos6522: expose mos6522_update_irq() through MOS6522DeviceClassMark Cave-Ayland
In the case where we have an interrupt generated externally from inputs to bits 1 and 2 of port A and/or port B, it is necessary to expose mos6522_update_irq() so it can be called by the interrupt source. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-06-16mac_newworld: add PMU deviceMark Cave-Ayland
The PMU device supercedes the CUDA device found on older New World Macs and is supported by a larger number of guest OSs from OS 9 to OS X 10.5. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-06-16adb: add property to disable direct reg 3 writesMark Cave-Ayland
MacOS 9 has a bug in its PMU driver whereby after configuring the ADB bus devices it sends another write to reg 3 on both devices resetting them both back to the same address. Add a new disable_direct_reg3_writes property to ADBDevice to disable these direct writes which can enabled just for the upcoming pmu-adb support. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-06-16mac_newworld: add gpios to macio devices with PMU enabledMark Cave-Ayland
PMU-enabled New World Macs expose their GPIOs via a separate memory region within the macio device. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-06-16mac_newworld: add via machine option to control mac99 VIA/ADB configurationMark Cave-Ayland
This option allows the VIA configuration to be controlled between 3 different possible setups: cuda, pmu-adb and pmu with USB rather than ADB keyboard/mouse. For the moment we don't do anything with the configuration except to pass it to the macio device (the via-cuda parent) and also to the firmware via the fw_cfg interface so that it can present the correct device tree. The default is cuda which is the current default and so will have no change in behaviour. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-06-15Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into stagingPeter Maydell
Block layer patches: - Fix options that work only with -drive or -blockdev, but not with both, because of QDict type confusion - rbd: Add options 'auth-client-required' and 'key-secret' - Remove deprecated -drive options serial/addr/cyls/heads/secs/trans - rbd, iscsi: Remove deprecated 'filename' option - Fix 'qemu-img map' crash with unaligned image size - Improve QMP documentation for jobs # gpg: Signature made Fri 15 Jun 2018 15:20:03 BST # gpg: using RSA key 7F09B272C88F2FD6 # gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" # Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6 * remotes/kevin/tags/for-upstream: (26 commits) block: Remove dead deprecation warning code block: Remove deprecated -drive option serial block: Remove deprecated -drive option addr block: Remove deprecated -drive geometry options rbd: New parameter key-secret rbd: New parameter auth-client-required block: Fix -blockdev / blockdev-add for empty objects and arrays check-block-qdict: Cover flattening of empty lists and dictionaries check-block-qdict: Rename qdict_flatten()'s variables for clarity block-qdict: Simplify qdict_is_list() some block-qdict: Clean up qdict_crumple() a bit block-qdict: Tweak qdict_flatten_qdict(), qdict_flatten_qlist() block-qdict: Simplify qdict_flatten_qdict() block: Make remaining uses of qobject input visitor more robust block: Factor out qobject_input_visitor_new_flat_confused() block: Clean up a misuse of qobject_to() in .bdrv_co_create_opts() block: Fix -drive for certain non-string scalars block: Fix -blockdev for certain non-string scalars qobject: Move block-specific qdict code to block-qdict.c block: Add block-specific QDict header ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-15hw/core/or-irq: Support more than 16 inputs to an OR gatePeter Maydell
For the IoTKit MPC support, we need to wire together the interrupt outputs of 17 MPCs; this exceeds the current value of MAX_OR_LINES. Increase MAX_OR_LINES to 32 (which should be enough for anyone). The tricky part is retaining the migration compatibility for existing OR gates; we add a subsection which is only used for larger OR gates, and define it such that we can freely increase MAX_OR_LINES in future (or even move to a dynamically allocated levels[] array without an upper size limit) without breaking compatibility. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20180604152941.20374-10-peter.maydell@linaro.org
2018-06-15hw/arm/armv7m: Remove unused armv7m_init() functionPeter Maydell
Remove the now-unused armv7m_init() function. This was a legacy from before we properly QOMified ARMv7M, and it has some flaws: * it combines work that needs to be done by an SoC object (creating and initializing the TYPE_ARMV7M object) with work that needs to be done by the board model (setting the system up to load the ELF file specified with -kernel) * TYPE_ARMV7M creation failure is fatal, but an SoC object wants to arrange to propagate the failure outward * it uses allocate-and-create via qdev_create() whereas the current preferred style for SoC objects is to do creation in-place Board and SoC models can instead do the two jobs this function was doing themselves, in the right places and with whatever their preferred style/error handling is. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 20180601144328.23817-3-peter.maydell@linaro.org
2018-06-15block: Remove deprecated -drive option serialKevin Wolf
The -drive option serial was deprecated in QEMU 2.10. It's time to remove it. Tests need to be updated to set the serial number with -global instead of using the -drive option. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com>
2018-06-12Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-3.0-20180612' ↵Peter Maydell
into staging ppc patch queue 2018-06-12 Here's another batch of ppc patches towards the 3.0 release. There's a fair bit here, because I've been working through my mail backlog after a holiday. There's not much of a central theme, amongst other things we have: * ppc440 / sam460ex improvements * logging and error cleanups * 40p (PReP) bugfixes * Macintosh fixes and cleanups * Add emulation of the new POWER9 store-forwarding barrier instruction variant * Hotplug cleanups # gpg: Signature made Tue 12 Jun 2018 07:43:21 BST # gpg: using RSA key 6C38CACA20D9B392 # gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" # gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" # gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" # gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" # Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392 * remotes/dgibson/tags/ppc-for-3.0-20180612: (33 commits) spapr_pci: Remove unhelpful pagesize warning xics_kvm: use KVM helpers ppc/pnv: fix LPC HC firmware address space spapr: handle cpu core unplug via hotplug handler chain spapr: handle pc-dimm unplug via hotplug handler chain spapr: introduce machine unplug handler spapr: move memory hotplug support check into spapr_memory_pre_plug() spapr: move lookup of the node into spapr_memory_plug() spapr: no need to verify the node target/ppc: Allow PIR read in privileged mode ppc4xx_i2c: Clean up and improve error logging target/ppc: extend eieio for POWER9 mos6522: convert VMSTATE_TIMER_PTR_TEST to VMSTATE_TIMER_PTR mos6522: move timer frequency initialisation to mos6522_reset cuda: embed mos6522_cuda device directly rather than using QOM object link mos6522: fix vmstate_mos6522_timer version in vmstate_mos6522 ppc: add missing FW_CFG_PPC_NVRAM_FLAT definition ppc: remove obsolete macio_init() definition from mac.h ppc: remove obsolete pci_pmac_init() definitions from mac.h hw/misc/mos6522: Add trailing '\n' to qemu_log() calls ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-12ppc/pnv: fix LPC HC firmware address spaceCédric Le Goater
A specific MemoryRegion is required for the LPC HC Firmware address space. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-06-12mos6522: move timer frequency initialisation to mos6522_resetMark Cave-Ayland
The 6522 VIA timer frequency cannot be set by altering registers within the device itself and hence it is a fixed property of the machine. Move the initialisation of the timer frequency to the mos6522 reset function and ensure that any subclasses always call the parent reset function so that it isn't required to store the timer frequency within vmstate_mos6522_timer itself. By moving the frequency initialisation to the device reset function then we find that the realize function for both mos6522 and mos6522_cuda becomes obsolete and can simply be removed. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-06-12cuda: embed mos6522_cuda device directly rather than using QOM object linkMark Cave-Ayland
Examining the migration stream it can be seen that the mos6522 device state is being stored separately rather than as part of the CUDA device which is incorrect (and likely to cause issues if another mos6522 device is added to the machine). Resolve this by embedding the mos6522_cuda device directly within the CUDA device rather than using a QOM object link to reference the device separately. Note that we also bump the version in vmstate_cuda to reflect this change: this isn't particularly important for the moment as the Mac machine migration isn't 100% reliable due to issues migrating the timebase under TCG. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-06-12ppc: add missing FW_CFG_PPC_NVRAM_FLAT definitionMark Cave-Ayland
This is used in OpenBIOS to define the memory layout of the NVRAM device. Whilst currently left at its default value, add the missing definition to ensure it is reserved. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-06-12uninorth: remove token register from uninorth deviceMark Cave-Ayland
>From observation of various OS sources it can be seen that the token register introduced in 4e46dcdbd3 "PPC: Newworld: Add uninorth token register" is not required, since the only register currently implemented is the uninorth hardware version which is read-only. Remove the token register implementation and instead return the uninorth version corresponding to the hardware. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-06-11nvdimm: make persistence option symbolicRoss Zwisler
Replace the "nvdimm-cap" option which took numeric arguments such as "2" with a more user friendly "nvdimm-persistence" option which takes symbolic arguments "cpu" or "mem-ctrl". Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Suggested-by: Michael S. Tsirkin <mst@redhat.com> Suggested-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-06-08ide: introduce ide_transfer_start_norecursePaolo Bonzini
For the case where the end_transfer_func is also the caller of ide_transfer_start, the mutual recursion can lead to unlimited stack usage. Introduce a new version that can be used to change tail recursion into a loop, and use it in trace_ide_atapi_cmd_reply_end. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180606190955.20845-8-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2018-06-08ide: push end_transfer_func out of start_transfer callback, rename callbackPaolo Bonzini
Now that end_transfer_func is a tail call in ahci_start_transfer, formalize the fact that the callback (of which ahci_start_transfer is the sole implementation) takes care of the transfer too: rename it to pio_transfer and, if it is present, call the end_transfer_func as soon as it returns. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180606190955.20845-4-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2018-06-08sdcard: Reflect when the Spec v3 is supported in the Config Register (SCR)Philippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20180607180641.874-6-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-08sdcard: Add a 'spec_version' property, default to Spec v2.00Philippe Mathieu-Daudé
As of this commit, the Spec v1 is not working, and all controllers expect the cards to be conformant to Spec v2. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20180607180641.874-4-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-08ftgmac100: compute maximum frame size depending on the protocolCédric Le Goater
The maximum frame size includes the CRC and depends if a VLAN tag is inserted or not. Adjust the frame size limit in the transmit handler using on the FTGMAC100State buffer size and in the receive handler use the packet protocol. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180530061711.23673-2-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-08misc: add pca9552 LED blinker modelCédric Le Goater
Specs are available here : https://www.nxp.com/docs/en/application-note/AN264.pdf This is a simple model supporting the basic registers for led and GPIO mode. The device also supports two blinking rates but not the model yet. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180530064049.27976-7-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-08smbus: add a smbus_eeprom_init_one() routineCédric Le Goater
This is an helper routine to add a single EEPROM on an I2C bus. It can be directly used by smbus_eeprom_init() which adds a certain number of EEPROMs on mips and x86 machines. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180530064049.27976-5-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-08arm_gicv3_kvm: kvm_dist_get/put: skip the registers banked by GICRShannon Zhao
While we skip the GIC_INTERNAL irqs, we don't change the register offset accordingly. This will overlap the GICR registers value and leave the last GIC_INTERNAL irq's registers out of update. Fix this by skipping the registers banked by GICR. Also for migration compatibility if the migration source (old version qemu) doesn't send gicd_no_migration_shift_bug = 1 to destination, then we shift the data of PPI to get the right data for SPI. Fixes: 367b9f527becdd20ddf116e17a3c0c2bbc486920 Cc: qemu-stable@nongnu.org Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com> Message-id: 1527816987-16108-1-git-send-email-zhaoshenglong@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-05vfio: remove DPRINTF() definition from vfio-common.hTiwei Bie
This macro isn't used by any VFIO code. And its name is too generic. The vfio-common.h (in include/hw/vfio) can be included by other modules in QEMU. It can introduce conflicts. Signed-off-by: Tiwei Bie <tiwei.bie@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2018-06-04Merge remote-tracking branch 'remotes/juanquintela/tags/migration/20180604' ↵Peter Maydell
into staging migration/next for 20180604 # gpg: Signature made Mon 04 Jun 2018 05:14:24 BST # gpg: using RSA key F487EF185872D723 # gpg: Good signature from "Juan Quintela <quintela@redhat.com>" # gpg: aka "Juan Quintela <quintela@trasno.org>" # Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723 * remotes/juanquintela/tags/migration/20180604: migration: not wait RDMA_CM_EVENT_DISCONNECTED event after rdma_disconnect migration: remove unnecessary variables len in QIOChannelRDMA migration: Don't activate block devices if using -S migration: discard non-migratable RAMBlocks migration: introduce decompress-error-check Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-04Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
acpi, vhost, misc: fixes, features vDPA support, fix to vhost blk RO bit handling, some include path cleanups, NFIT ACPI table. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Fri 01 Jun 2018 17:25:19 BST # gpg: using RSA key 281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: (31 commits) vhost-blk: turn on pre-defined RO feature bit ACPI testing: test NFIT platform capabilities nvdimm, acpi: support NFIT platform capabilities tests/.gitignore: add entry for generated file arch_init: sort architectures ui: use local path for local headers qga: use local path for local headers colo: use local path for local headers migration: use local path for local headers usb: use local path for local headers sd: fix up include vhost-scsi: drop an unused include ppc: use local path for local headers rocker: drop an unused include e1000e: use local path for local headers ioapic: fix up includes ide: use local path for local headers display: use local path for local headers trace: use local path for local headers migration: drop an unused include ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-04migration: introduce decompress-error-checkXiao Guangrong
QEMU 3.0 enables strict check for compression & decompression to make the migration more robust, that depends on the source to fix the internal design which triggers the unexpected error conditions To make it work for migrating old version QEMU to 2.13 QEMU, we introduce this parameter to disable the error check on the destination which is the default behavior of the machine type which is older than 2.13, alternately, the strict check can be enabled explicitly as followings: -M pc-q35-2.11 -global migration.decompress-error-check=true Signed-off-by: Xiao Guangrong <xiaoguangrong@tencent.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2018-06-01Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
* Linux header upgrade (Peter) * firmware.json definition (Laszlo) * IPMI migration fix (Corey) * QOM improvements (Alexey, Philippe, me) * Memory API cleanups (Jay, me, Tristan, Peter) * WHPX fixes and improvements (Lucian) * Chardev fixes (Marc-André) * IOMMU documentation improvements (Peter) * Coverity fixes (Peter, Philippe) * Include cleanup (Philippe) * -clock deprecation (Thomas) * Disable -sandbox unless CONFIG_SECCOMP (Yi Min Zhao) * Configurability improvements (me) # gpg: Signature made Fri 01 Jun 2018 17:42:13 BST # gpg: using RSA key BFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (56 commits) hw: make virtio devices configurable via default-configs/ hw: allow compiling out SCSI memory: Make operations using MemoryRegionIoeventfd struct pass by pointer. char: Remove unwanted crlf conversion qdev: Remove DeviceClass::init() and ::exit() qdev: Simplify the SysBusDeviceClass::init path hw/i2c: Use DeviceClass::realize instead of I2CSlaveClass::init hw/i2c/smbus: Use DeviceClass::realize instead of SMBusDeviceClass::init target/i386/kvm.c: Remove compatibility shim for KVM_HINTS_REALTIME Update Linux headers to 4.17-rc6 target/i386/kvm.c: Handle renaming of KVM_HINTS_DEDICATED scripts/update-linux-headers: Handle kernel license no longer being one file scripts/update-linux-headers: Handle __aligned_u64 virtio-gpu-3d: Define VIRTIO_GPU_CAPSET_VIRGL2 elsewhere gdbstub: Prevent fd leakage docs/interop: add "firmware.json" ipmi: Use proper struct reference for KCS vmstate vmstate: Add a VSTRUCT type tcg: remove softfloat from --disable-tcg builds qemu-options: Mark the non-functional -clock option as deprecated ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-01vhost-blk: turn on pre-defined RO feature bitChangpeng Liu
Read only feature shouldn't be negotiable, because if the backend device reported Read only feature supported, QEMU host driver shouldn't change backend's RO attribute. While here, also enable the vhost-user-blk test utility to test RO feature. Signed-off-by: Changpeng Liu <changpeng.liu@intel.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-06-01nvdimm, acpi: support NFIT platform capabilitiesRoss Zwisler
Add a machine command line option to allow the user to control the Platform Capabilities Structure in the virtualized NFIT. This Platform Capabilities Structure was added in ACPI 6.2 Errata A. Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-06-01qdev: Remove DeviceClass::init() and ::exit()Philippe Mathieu-Daudé
Since no devices use it, we can safely remove it. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180419212727.26095-5-f4bug@amsat.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Removal of DeviceClass::init() moved from previous patch, missing documentation updates supplied] Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180528144509.15812-5-armbru@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-01hw/i2c: Use DeviceClass::realize instead of I2CSlaveClass::initPhilippe Mathieu-Daudé
I2CSlaveClass::init is no more used, remove it. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180419212727.26095-3-f4bug@amsat.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180528144509.15812-3-armbru@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-01hw/i2c/smbus: Use DeviceClass::realize instead of SMBusDeviceClass::initPhilippe Mathieu-Daudé
SMBusDeviceClass::init is no more used, remove it. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180419212727.26095-2-f4bug@amsat.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180528144509.15812-2-armbru@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-01virtio-gpu-3d: Define VIRTIO_GPU_CAPSET_VIRGL2 elsewhereAlex Williamson
Commit 5643cc94ac1c ("virtio-gpu-3d: add support for second capability set (v4)") updated virtio_gpu.h with a define that does not yet(?) exist upstream resulting in build breakage every time Linux headers are updated via the standard update script. Conditionally define this within QEMU code instead to avoid future breakage. Cc: Dave Airlie <airlied@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Fixes: 5643cc94ac1c ("virtio-gpu-3d: add support for second capability set (v4)") Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20180525132755.21839-2-peter.maydell@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-01hw: Clean "hw/devices.h" includesPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180528232719.4721-22-f4bug@amsat.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-01hw/misc/mips_itu: Cleanup includesPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180528232719.4721-17-f4bug@amsat.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-01hw: Do not include "exec/address-spaces.h" if it is not necessaryPhilippe Mathieu-Daudé
Code change produced with: $ git grep '#include "exec/address-spaces.h"' hw include/hw | \ cut -d: -f-1 | \ xargs egrep -L "(get_system_|address_space_)" | \ xargs sed -i.bak '/#include "exec\/address-spaces.h"/d' Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180528232719.4721-12-f4bug@amsat.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-05-31xen-hvm: try to use xenforeignmemory_map_resource() to map ioreq pagesPaul Durrant
Xen 4.11 has a new API to directly map guest resources. Among the resources that can be mapped using this API are ioreq pages. This patch modifies QEMU to attempt to use the new API should it exist, falling back to the previous mechanism if it is unavailable. Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Reviewed-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
2018-05-31vfio: Include "exec/address-spaces.h" directly in the source filePhilippe Mathieu-Daudé
No declaration of "hw/vfio/vfio-common.h" directly requires to include the "exec/address-spaces.h" header. To simplify dependencies and ease the upcoming cleanup of "exec/address-spaces.h", directly include it in the source file where the declaration are used. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180528232719.4721-2-f4bug@amsat.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-05-24vhost-user: support registering external host notifiersTiwei Bie
This patch introduces VHOST_USER_PROTOCOL_F_HOST_NOTIFIER. With this feature negotiated, vhost-user backend can register memory region based host notifiers. And it will allow the guest driver in the VM to notify the hardware accelerator at the vhost-user backend directly. Signed-off-by: Tiwei Bie <tiwei.bie@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-05-24vhost-user: introduce shared vhost-user stateTiwei Bie
When multi queue is enabled e.g. for a virtio-net device, each queue pair will have a vhost_dev, and the only thing shared between vhost devs currently is the chardev. This patch introduces a vhost-user state structure which will be shared by all vhost devs of the same virtio device. Signed-off-by: Tiwei Bie <tiwei.bie@intel.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-05-24vhost: allow backends to filter memory sectionsTiwei Bie
This patch introduces a vhost op for vhost backends to allow them to filter the memory sections that they can handle. Signed-off-by: Tiwei Bie <tiwei.bie@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-05-24Merge remote-tracking branch 'remotes/kraxel/tags/vga-20180524-pull-request' ↵Peter Maydell
into staging vga: catch depth 0 hw/display: add new bochs-display device some cleanups. # gpg: Signature made Thu 24 May 2018 16:45:46 BST # gpg: using RSA key 4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/vga-20180524-pull-request: MAINTAINERS: add vga entries bochs-display: add pcie support bochs-display: add dirty tracking support hw/display: add new bochs-display device vga-pci: use PCI_VGA_MMIO_SIZE vga: move bochs vbe defines to header file vga: catch depth 0 Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.2.3 (git 2.26.2) at 2025-01-31 08:49:51 +0000