aboutsummaryrefslogtreecommitdiff
path: root/include/hw
AgeCommit message (Collapse)Author
2021-09-30spapr_numa.c: parametrize FORM1 macrosDaniel Henrique Barboza
The next preliminary step to introduce NUMA FORM2 affinity is to make the existing code independent of FORM1 macros and values, i.e. MAX_DISTANCE_REF_POINTS, NUMA_ASSOC_SIZE and VCPU_ASSOC_SIZE. This patch accomplishes that by doing the following: - move the NUMA related macros from spapr.h to spapr_numa.c where they are used. spapr.h gets instead a 'NUMA_NODES_MAX_NUM' macro that is used to refer to the maximum number of NUMA nodes, including GPU nodes, that the machine can support; - MAX_DISTANCE_REF_POINTS and NUMA_ASSOC_SIZE are renamed to FORM1_DIST_REF_POINTS and FORM1_NUMA_ASSOC_SIZE. These FORM1 specific macros are used in FORM1 init functions; - code that uses MAX_DISTANCE_REF_POINTS now retrieves the max_dist_ref_points value using get_max_dist_ref_points(). NUMA_ASSOC_SIZE is replaced by get_numa_assoc_size() and VCPU_ASSOC_SIZE is replaced by get_vcpu_assoc_size(). These functions are used by the generic device tree functions and h_home_node_associativity() and will allow them to switch between FORM1 and FORM2 without changing their core logic. Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> Message-Id: <20210920174947.556324-4-danielhb413@gmail.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-09-29ppc/pnv: Rename "id" to "quad-id" in PnvQuadCédric Le Goater
This to avoid possible conflicts with the "id" property of QOM objects. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20210901094153.227671-9-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-09-29ppc/xive: Export xive_tctx_word2() helperCédric Le Goater
Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20210901094153.227671-8-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-09-29ppc/xive: Export priority_to_ipb() helperCédric Le Goater
Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20210901094153.227671-7-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-09-29nubus: add support for slot IRQsMark Cave-Ayland
Each Nubus slot has an IRQ line that can be used to request service from the CPU. Connect the IRQs to the Nubus bridge so that they can be wired up using qdev gpios accordingly, and introduce a new nubus_set_irq() function that can be used by Nubus devices to control the slot IRQ. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210924073808.1041-19-mark.cave-ayland@ilande.co.uk> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-29nubus-bridge: embed the NubusBus object directly within nubus-bridgeMark Cave-Ayland
Since nubus-bridge is a container for NubusBus then it should be embedded directly within the bridge device using qbus_create_inplace(). Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20210924073808.1041-17-mark.cave-ayland@ilande.co.uk> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-29nubus: move NubusBus from mac-nubus-bridge to nubus-bridgeMark Cave-Ayland
Now that Nubus has its own address space rather than mapping directly into the system bus, move the Nubus reference from MacNubusBridge to NubusBridge. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20210924073808.1041-16-mark.cave-ayland@ilande.co.uk> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-29mac-nubus-bridge: rename MacNubusState to MacNubusBridgeMark Cave-Ayland
This better reflects that the mac-nubus-bridge device is derived from the nubus-bridge device, and that the structure represents the state of the bridge device and not the Nubus itself. Also update the comment in the file header to reflect that mac-nubus-bridge is specific to the Macintosh. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20210924073808.1041-15-mark.cave-ayland@ilande.co.uk> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-29nubus-bridge: introduce separate NubusBridge structureMark Cave-Ayland
This is to allow the Nubus bridge to store its own additional state. Also update the comment in the file header to reflect that nubus-bridge is not specific to the Macintosh. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20210924073808.1041-14-mark.cave-ayland@ilande.co.uk> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-29nubus: move nubus to its own 32-bit address spaceMark Cave-Ayland
According to "Designing Cards and Drivers for the Macintosh Family" the Nubus has its own 32-bit address space based upon physical slot addressing. Move Nubus to its own 32-bit address space and then use memory region aliases to map available slot and super slot ranges into the q800 system address space via the Macintosh Nubus bridge. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20210924073808.1041-13-mark.cave-ayland@ilande.co.uk> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-29nubus-device: add romfile property for loading declaration ROMsMark Cave-Ayland
The declaration ROM is located at the top-most address of the standard slot space. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20210924073808.1041-12-mark.cave-ayland@ilande.co.uk> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-29nubus-device: remove nubus_register_rom() and nubus_register_format_block()Mark Cave-Ayland
Since there is no need to generate a dummy declaration ROM, remove both nubus_register_rom() and nubus_register_format_block(). These will shortly be replaced with a mechanism to optionally load a declaration ROM from disk to allow real images to be used within QEMU. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20210924073808.1041-11-mark.cave-ayland@ilande.co.uk> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-29nubus: use bitmap to manage available slotsMark Cave-Ayland
Convert nubus_device_realize() to use a bitmap to manage available slots to allow for future Nubus devices to be plugged into arbitrary slots from the command line using a new qdev "slot" parameter for nubus devices. Update mac_nubus_bridge_init() to only allow slots 0x9 to 0xe on Macintosh machines as documented in "Designing Cards and Drivers for the Macintosh Family". Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210924073808.1041-5-mark.cave-ayland@ilande.co.uk> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-29nubus-device: expose separate super slot memory regionMark Cave-Ayland
According to "Designing Cards and Drivers for the Macintosh Family" each physical nubus slot can access 2 separate address ranges: a super slot memory region which is 256MB and a standard slot memory region which is 16MB. Currently a Nubus device uses the physical slot number to determine whether it is using a standard slot memory region or a super slot memory region rather than exposing both memory regions for use as required. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20210924073808.1041-4-mark.cave-ayland@ilande.co.uk> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-29nubus-device: rename slot_nb variable to slotMark Cave-Ayland
This is in preparation for creating a qdev property of the same name. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20210924073808.1041-3-mark.cave-ayland@ilande.co.uk> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-27hw/loader: Restrict PC_ROM_* definitions to hw/i386/pcPhilippe Mathieu-Daudé
The PC_ROM_* definitions are only used by the PC machine, and are irrelevant to the other architectures / machines. Reduce their scope by moving them to hw/i386/pc.c. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20210917185949.2244956-1-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-21hw/core: Make do_unaligned_access noreturnRichard Henderson
While we may have had some thought of allowing system-mode to return from this hook, we have no guests that require this. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-09-21Merge remote-tracking branch ↵Richard Henderson
'remotes/alistair23/tags/pull-riscv-to-apply-20210921' into staging Second RISC-V PR for QEMU 6.2 - ePMP CSR address updates - Convert internal interrupts to use QEMU GPIO lines - SiFive PWM support - Support for RISC-V ACLINT - SiFive PDMA fixes - Update to u-boot instructions for sifive_u - mstatus.SD bug fix for hypervisor extensions - OpenTitan fix for USB dev address # gpg: Signature made Mon 20 Sep 2021 11:52:26 PM PDT # gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054 # gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054 * remotes/alistair23/tags/pull-riscv-to-apply-20210921: (21 commits) hw/riscv: opentitan: Correct the USB Dev address target/riscv: csr: Rename HCOUNTEREN_CY and friends target/riscv: Backup/restore mstatus.SD bit when virtual register swapped docs/system/riscv: sifive_u: Update U-Boot instructions hw/dma: sifive_pdma: don't set Control.error if 0 bytes to transfer hw/dma: sifive_pdma: allow non-multiple transaction size transactions hw/dma: sifive_pdma: claim bit must be set before DMA transactions hw/dma: sifive_pdma: reset Next* registers when Control.claim is set hw/riscv: virt: Add optional ACLINT support to virt machine hw/riscv: virt: Re-factor FDT generation hw/intc: Upgrade the SiFive CLINT implementation to RISC-V ACLINT hw/intc: Rename sifive_clint sources to riscv_aclint sources sifive_u: Connect the SiFive PWM device hw/timer: Add SiFive PWM support hw/intc: ibex_timer: Convert the timer to use RISC-V CPU GPIO lines hw/intc: sifive_plic: Convert the PLIC to use RISC-V CPU GPIO lines hw/intc: ibex_plic: Convert the PLIC to use RISC-V CPU GPIO lines hw/intc: sifive_clint: Use RISC-V CPU GPIO lines target/riscv: Expose interrupt pending bits as GPIO lines target/riscv: Fix satp write ... Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-09-21hw/riscv: virt: Add optional ACLINT support to virt machineAnup Patel
We extend virt machine to emulate ACLINT devices only when "aclint=on" parameter is passed along with machine name in QEMU command-line. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-id: 20210831110603.338681-5-anup.patel@wdc.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-09-21hw/intc: Upgrade the SiFive CLINT implementation to RISC-V ACLINTAnup Patel
The RISC-V ACLINT is more modular and backward compatible with original SiFive CLINT so instead of duplicating the original SiFive CLINT implementation we upgrade the current SiFive CLINT implementation to RISC-V ACLINT implementation. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-id: 20210831110603.338681-3-anup.patel@wdc.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-09-21hw/intc: Rename sifive_clint sources to riscv_aclint sourcesAnup Patel
We will be upgrading SiFive CLINT implementation into RISC-V ACLINT implementation so let's first rename the sources. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-id: 20210831110603.338681-2-anup.patel@wdc.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-09-21sifive_u: Connect the SiFive PWM deviceAlistair Francis
Connect the SiFive PWM device and expose it via the device tree. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-id: 22f98648b4e012f78529a56f5ca60b0b27852a4d.1631159656.git.alistair.francis@wdc.com
2021-09-21hw/timer: Add SiFive PWM supportAlistair Francis
This is the initial commit of the SiFive PWM timer. This is used by guest software as a timer and is included in the SiFive FU540 SoC. Signed-off-by: Justin Restivo <jrestivo@draper.com> Signed-off-by: Alexandra Clifford <aclifford@draper.com> Signed-off-by: Amanda Strnad <astrnad@draper.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-id: 9f70a210acbfaf0e1ea6ad311ab892ac69134d8b.1631159656.git.alistair.francis@wdc.com
2021-09-21hw/intc: ibex_timer: Convert the timer to use RISC-V CPU GPIO linesAlistair Francis
Instead of using riscv_cpu_update_mip() let's instead use the new RISC-V CPU GPIO lines to set the timer MIP bits. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 84d5b1d5783d2e79eee69a2f7ac480cc0c070db3.1630301632.git.alistair.francis@wdc.com
2021-09-21hw/intc: sifive_plic: Convert the PLIC to use RISC-V CPU GPIO linesAlistair Francis
Instead of using riscv_cpu_update_mip() let's instead use the new RISC-V CPU GPIO lines to set the external MIP bits. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Message-id: 0364190bfa935058a845c0fa1ecf650328840ad5.1630301632.git.alistair.francis@wdc.com
2021-09-21hw/intc: ibex_plic: Convert the PLIC to use RISC-V CPU GPIO linesAlistair Francis
Instead of using riscv_cpu_update_mip() let's instead use the new RISC-V CPU GPIO lines to set the external MIP bits. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 0a76946981852f5bd15f0c37ab35b253371027a8.1630301632.git.alistair.francis@wdc.com
2021-09-21hw/intc: sifive_clint: Use RISC-V CPU GPIO linesAlistair Francis
Instead of using riscv_cpu_update_mip() let's instead use the new RISC-V CPU GPIO lines to set the timer and soft MIP bits. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com> Message-id: 946e1ef5e268b24084c7ddad84c146de62a56736.1630301632.git.alistair.francis@wdc.com
2021-09-20hw/arm/aspeed: Allow machine to set UART defaultPeter Delevoryas
When you run QEMU with an Aspeed machine and a single serial device using stdio like this: qemu -machine ast2600-evb -drive ... -serial stdio The guest OS can read and write to the UART5 registers at 0x1E784000 and it will receive from stdin and write to stdout. The Aspeed SoC's have a lot more UART's though (AST2500 has 5, AST2600 has 13) and depending on the board design, may be using any of them as the serial console. (See "stdout-path" in a DTS to check which one is chosen). Most boards, including all of those currently defined in hw/arm/aspeed.c, just use UART5, but some use UART1. This change adds some flexibility for different boards without requiring users to change their command-line invocation of QEMU. I tested this doesn't break existing code by booting an AST2500 OpenBMC image and an AST2600 OpenBMC image, each using UART5 as the console. Then I tested switching the default to UART1 and booting an AST2600 OpenBMC image that uses UART1, and that worked too. Signed-off-by: Peter Delevoryas <pdel@fb.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20210901153615.2746885-2-pdel@fb.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2021-09-20aspeed: Emulate the AST2600A3Joel Stanley
This is the latest revision of the ASPEED 2600 SoC. As there is no need to model multiple revisions of the same SoC for the moment, update the SCU AST2600 to model the A3 revision instead of the A1 and adapt the AST2600 SoC and machines. Reset values are taken from v8 of the datasheet. Signed-off-by: Joel Stanley <joel@jms.id.au> [ clg: - Introduced an Aspeed "ast2600-a3" SoC class - Commit log update ] Message-Id: <20210629142336.750058-3-clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2021-09-20watchdog: aspeed: Sanitize control register valuesAndrew Jeffery
While some of the critical fields remain the same, there is variation in the definition of the control register across the SoC generations. Reserved regions are adjusted, while in other cases the mutability or behaviour of fields change. Introduce a callback to sanitize the value on writes to ensure model behaviour reflects the hardware. Fixes: 854123bf8d4b ("wdt: Add Aspeed watchdog device model") Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20210709053107.1829304-2-andrew@aj.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2021-09-16Merge remote-tracking branch ↵Peter Maydell
'remotes/vivier2/tags/trivial-branch-for-6.2-pull-request' into staging Trivial patches pull request 20210916 # gpg: Signature made Thu 16 Sep 2021 15:09:39 BST # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier2/tags/trivial-branch-for-6.2-pull-request: target/sparc: Make sparc_cpu_dump_state() static target/avr: Fix compiler errors (-Werror=enum-conversion) hw/vfio: Fix typo in comments intel_iommu: Fix typo in comments target/i386: spelling: occured=>occurred, mininum=>minimum configure: add missing pc-bios/qemu_vga.ndrv symlink in build tree spelling: sytem => system qdev: Complete qdev_init_gpio_out() documentation hw/i386/acpi-build: Fix a typo util: Remove redundant checks in the openpty() Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-09-15qdev: Complete qdev_init_gpio_out() documentationPhilippe Mathieu-Daudé
qdev_init_gpio_out() states it "creates an array of anonymous output GPIO lines" but doesn't document how this array is released. Add a note that it is automatically free'd in qdev instance_finalize(). Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20210819142731.2827912-1-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-14accel/tcg: Restrict TCGCPUOps::cpu_exec_interrupt() to sysemuPhilippe Mathieu-Daudé
All targets call TCGCPUOps::cpu_exec_interrupt() from sysemu code. Move its declaration to restrict it to system emulation. Extend the code guarded. Restrict the static inlined need_replay_interrupt() method to avoid a "defined but not used" warning. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210911165434.531552-24-f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-09-14accel/tcg: Rename user-mode do_interrupt hack as fake_user_interruptPhilippe Mathieu-Daudé
do_interrupt() is sysemu specific. However due to some X86 specific hack, it is also used in user-mode emulation, which is why it couldn't be restricted to CONFIG_SOFTMMU (see the comment around added in commit 78271684719: "cpu: tcg_ops: move to tcg-cpu-ops.h, keep a pointer in CPUClass"). Keep the hack but rename the handler as fake_user_interrupt() and restrict do_interrupt() to sysemu. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Warner Losh <imp@bsdimp.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210911165434.531552-6-f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-09-13qdev: Support marking individual buses as 'full'Peter Maydell
By default, QEMU will allow devices to be plugged into a bus up to the bus class's device count limit. If the user creates a device on the command line or via the monitor and doesn't explicitly specify the bus to plug it in, QEMU will plug it into the first non-full bus that it finds. This is fine in most cases, but some machines have multiple buses of a given type, some of which are dedicated to on-board devices and some of which have an externally exposed connector for user-pluggable devices. One example is I2C buses. Provide a new function qbus_mark_full() so that a machine model can mark this kind of "internal only" bus as 'full' after it has created all the devices that should be plugged into that bus. The "find a non-full bus" algorithm will then skip the internal-only bus when looking for a place to plug in user-created devices. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210903151435.22379-2-peter.maydell@linaro.org
2021-09-13hw/arm/virt: add ITS support in virt GICShashi Mallela
Included creation of ITS as part of virt platform GIC initialization. This Emulated ITS model now co-exists with kvm ITS and is enabled in absence of kvm irq kernel support in a platform. Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20210910143951.92242-9-shashi.mallela@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-09-13hw/intc: GICv3 redistributor ITS processingShashi Mallela
Implemented lpi processing at redistributor to get lpi config info from lpi configuration table,determine priority,set pending state in lpi pending table and forward the lpi to cpuif.Added logic to invoke redistributor lpi processing with translated LPI which set/clear LPI from ITS device as part of ITS INT,CLEAR,DISCARD command and GITS_TRANSLATER processing. Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org> Tested-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20210910143951.92242-7-shashi.mallela@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-09-13hw/intc: GICv3 ITS Feature enablementShashi Mallela
Added properties to enable ITS feature and define qemu system address space memory in gicv3 common,setup distributor and redistributor registers to indicate LPI support. Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Neil Armstrong <narmstrong@baylibre.com> Message-id: 20210910143951.92242-6-shashi.mallela@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-09-13hw/intc: GICv3 ITS Command processingShashi Mallela
Added ITS command queue handling for MAPTI,MAPI commands,handled ITS translation which triggers an LPI via INT command as well as write to GITS_TRANSLATER register,defined enum to differentiate between ITS command interrupt trigger and GITS_TRANSLATER based interrupt trigger. Each of these commands make use of other functionalities implemented to get device table entry,collection table entry or interrupt translation table entry required for their processing. Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20210910143951.92242-5-shashi.mallela@linaro.org [PMM: use INTERRUPT for ItsCmdType enum name to avoid conflict with INT type defined by Windows headers] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-09-13hw/intc: GICv3 ITS register definitions addedShashi Mallela
Defined descriptors for ITS device table,collection table and ITS command queue entities.Implemented register read/write functions, extract ITS table parameters and command queue parameters,extended gicv3 common to capture qemu address space(which host the ITS table platform memories required for subsequent ITS processing) and initialize the same in ITS device. Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Neil Armstrong <narmstrong@baylibre.com> Message-id: 20210910143951.92242-3-shashi.mallela@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-09-13hw/intc: GICv3 ITS initial frameworkShashi Mallela
Added register definitions relevant to ITS,implemented overall ITS device framework with stubs for ITS control and translater regions read/write,extended ITS common to handle mmio init between existing kvm device and newer qemu device. Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Neil Armstrong <narmstrong@baylibre.com> Message-id: 20210910143951.92242-2-shashi.mallela@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-09-08mac_via: add qdev gpios for nubus slot interrupts to VIA2Mark Cave-Ayland
These will soon be required to enable nubus devices to support interrupts. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20210830102447.10806-13-mark.cave-ayland@ilande.co.uk> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-08mac_via: rename VIA2_IRQ_SLOT_BIT to VIA2_IRQ_NUBUS_BITMark Cave-Ayland
Also improve the alignment of the shifted constants. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20210830102447.10806-12-mark.cave-ayland@ilande.co.uk> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-08mac_via: remove mac_via deviceMark Cave-Ayland
Remove the mac_via device and wire up both q800 VIA1 and VIA2 directly for the m68k q800 machine. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20210830102447.10806-10-mark.cave-ayland@ilande.co.uk> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-08mac_via: move ADB variables to MOS6522Q800VIA1StateMark Cave-Ayland
The ADB is accessed using clock and data pins on q800 VIA1 port B and so can be moved to MOS6522Q800VIA1State. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210830102447.10806-6-mark.cave-ayland@ilande.co.uk> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-08mac_via: move PRAM/RTC variables to MOS6522Q800VIA1StateMark Cave-Ayland
The PRAM/RTC is accessed using clock and data pins on q800 VIA1 port B and so can be moved to MOS6522Q800VIA1State. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210830102447.10806-5-mark.cave-ayland@ilande.co.uk> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-08mac_via: move PRAM contents and block backend to MOS6522Q800VIA1StateMark Cave-Ayland
The PRAM contents are accessed using clock and data pins on q800 VIA1 port B and so can be moved to MOS6522Q800VIA1State. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20210830102447.10806-4-mark.cave-ayland@ilande.co.uk> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-06s390x: Replace PAGE_SIZE, PAGE_SHIFT and PAGE_MASKThomas Huth
The PAGE_SIZE macro is causing trouble on Alpine Linux since it clashes with a macro from a system header there. We already have the TARGET_PAGE_SIZE, TARGET_PAGE_MASK and TARGET_PAGE_BITS macros in QEMU anyway, so let's simply replace the PAGE_SIZE, PAGE_MASK and PAGE_SHIFT macro with their TARGET_* counterparts. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/572 Message-Id: <20210901125800.611183-1-thuth@redhat.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Reviewed-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-09-06hw/s390x/s390-skeys: lazy storage key enablement under TCGDavid Hildenbrand
Let's enable storage keys lazily under TCG, just as we do under KVM. Only fairly old Linux versions actually make use of storage keys, so it can be kind of wasteful to allocate quite some memory and track changes and references if nobody cares. We have to make sure to flush the TLB when enabling storage keys after the VM was already running: otherwise it might happen that we don't catch references or modifications afterwards. Add proper documentation to all callbacks. The kvm-unit-tests skey tests keeps on working with this change. Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210903155514.44772-14-david@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-09-06hw/s390x/s390-skeys: rename skeys_enabled to skeys_are_enabledDavid Hildenbrand
... and make it return a bool instead. Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210903155514.44772-13-david@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-16 00:28:29 +0000