aboutsummaryrefslogtreecommitdiff
path: root/include/hw
AgeCommit message (Collapse)Author
2021-04-13Merge remote-tracking branch 'remotes/dg-gitlab/tags/ppc-for-6.0-20210412' ↵Peter Maydell
into staging ppc patch queue for 2021-04-21 Here's what I hope is the last ppc related pull request for qemu-6.0. The 2 patches here revert a behavioural change that after further discussion we concluded was a bad idea (adding a timeout for possibly-failed hot unplug requests). Instead it implements a different approach to the original problem: we again let unplug requests the guest doesn't respond to remain pending indefinitely, but no longer allow those to block attempts to retry the same unplug again. The change is a bit more complex than I'd like for this late in the freeze. Nonetheless, I think it's important to merge this for 6.0, so we don't allow a release which has the probably-a-bad-idea timeout behaviour. # gpg: Signature made Mon 12 Apr 2021 06:25:58 BST # gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392 # gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full] # gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full] # gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full] # gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown] # Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392 * remotes/dg-gitlab/tags/ppc-for-6.0-20210412: spapr.c: always pulse guest IRQ in spapr_core_unplug_request() spapr: rollback 'unplug timeout' for CPU hotunplugs Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-04-12esp: fix setting of ESPState mig_version_id when launching QEMU with -S optionMark Cave-Ayland
If QEMU is launched with the -S option then the ESPState mig_version_id property is left unset due to the ordering of the VMState fields in the VMStateDescription for sysbusespscsi and pciespscsi. If the VM is migrated and restored in this stopped state, the version tests in the vmstate_esp VMStateDescription and esp_post_load() become confused causing the migration to fail. Fix the ordering problem by moving the setting of mig_version_id to a common esp_pre_save() function which is invoked first by both sysbusespscsi and pciespscsi rather than at the point where ESPState is itself serialised into the migration stream. Buglink: https://bugs.launchpad.net/qemu/+bug/1922611 Fixes: 0bd005be78 ("esp: add vmstate_esp version to embedded ESPState") Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210407124842.32695-1-mark.cave-ayland@ilande.co.uk>
2021-04-12spapr: rollback 'unplug timeout' for CPU hotunplugsDaniel Henrique Barboza
The pseries machines introduced the concept of 'unplug timeout' for CPU hotunplugs. The idea was to circunvent a deficiency in the pSeries specification (PAPR), that currently does not define a proper way for the hotunplug to fail. If the guest refuses to release the CPU (see [1] for an example) there is no way for QEMU to detect the failure. Further discussions about how to send a QAPI event to inform about the hotunplug timeout [2] exposed problems that weren't predicted back when the idea was developed. Other QEMU machines don't have any type of hotunplug timeout mechanism for any device, e.g. ACPI based machines have a way to make hotunplug errors visible to the hypervisor. This would make this timeout mechanism exclusive to pSeries, which is not ideal. The real problem is that a QAPI event that reports hotunplug timeouts puts the management layer (namely Libvirt) in a weird spot. We're not telling that the hotunplug failed, because we can't be 100% sure of that, and yet we're resetting the unplug state back, preventing any DEVICE_DEL events to reach out in case the guest decides to release the device. Libvirt would need to inspect the guest itself to see if the device was released or not, otherwise the internal domain states will be inconsistent. Moreover, Libvirt already has an 'unplug timeout' concept, and a QEMU side timeout would need to be juggled together with the existing Libvirt timeout. All this considered, this solution ended up creating more trouble than it solved. This patch reverts the 3 commits that introduced the timeout mechanism for CPU hotplugs in pSeries machines. This reverts commit 4515a5f786024fabf0bef4cf3d28adf5647e6e82 "qemu_timer.c: add timer_deadline_ms() helper" This reverts commit d1c2e3ce3d5a5424651967bce1cf1f4caa0c6d91 "spapr_drc.c: add hotunplug timeout for CPUs" This reverts commit 51254ffb320183a4636635840c23ee0e3a1efffa "spapr_drc.c: introduce unplug_timeout_timer" [1] https://bugzilla.redhat.com/show_bug.cgi?id=1911414 [2] https://lists.gnu.org/archive/html/qemu-devel/2021-03/msg04682.html CC: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> Message-Id: <20210401000437.131140-2-danielhb413@gmail.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-04-06Merge remote-tracking branch ↵Peter Maydell
'remotes/pmaydell/tags/pull-target-arm-20210406' into staging target-arm queue: * ppc/e500 and arm/virt: only add valid dynamic sysbus devices to the platform bus * update i.mx31 maintainer list * Revert "target/arm: Make number of counters in PMCR follow the CPU" # gpg: Signature made Tue 06 Apr 2021 13:25:54 BST # gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE # gpg: issuer "peter.maydell@linaro.org" # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate] # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * remotes/pmaydell/tags/pull-target-arm-20210406: Remove myself as i.mx31 maintainer Revert "target/arm: Make number of counters in PMCR follow the CPU" hw/ppc/e500plat: Only try to add valid dynamic sysbus devices to platform bus hw/arm/virt: Only try to add valid dynamic sysbus devices to platform bus machine: Provide a function to check the dynamic sysbus allowlist include/hw/boards.h: Document machine_class_allow_dynamic_sysbus_dev() Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-04-06virtio-pci: compat page aligned ATSJason Wang
Commit 4c70875372b8 ("pci: advertise a page aligned ATS") advertises the page aligned via ATS capability (RO) to unbrek recent Linux IOMMU drivers since 5.2. But it forgot the compat the capability which breaks the migration from old machine type: (qemu) qemu-kvm: get_pci_config_device: Bad config data: i=0x104 read: 0 device: 20 cmask: ff wmask: 0 w1cmask:0 This patch introduces a new parameter "x-ats-page-aligned" for virtio-pci device and turns it on for machine type which is newer than 5.1. Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Peter Xu <peterx@redhat.com> Cc: Dr. David Alan Gilbert <dgilbert@redhat.com> Cc: qemu-stable@nongnu.org Fixes: 4c70875372b8 ("pci: advertise a page aligned ATS") Signed-off-by: Jason Wang <jasowang@redhat.com> Message-Id: <20210406040330.11306-1-jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-04-06machine: Provide a function to check the dynamic sysbus allowlistPeter Maydell
Provide a new function dynamic_sysbus_dev_allowed() which checks the per-machine list of permitted dynamic sysbus devices and returns a boolean result indicating whether the device is allowed. We can use this in the implementation of validate_sysbus_device(), but we will also need it so that machine hotplug callbacks can validate devices rather than assuming that any sysbus device might be hotpluggable into the platform bus. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 20210325153310.9131-3-peter.maydell@linaro.org
2021-04-06include/hw/boards.h: Document machine_class_allow_dynamic_sysbus_dev()Peter Maydell
The function machine_class_allow_dynamic_sysbus_dev() is currently undocumented; add a doc comment. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 20210325153310.9131-2-peter.maydell@linaro.org
2021-04-04x86: rename oem-id and oem-table-id propertiesPaolo Bonzini
After introducing non-scalar machine properties, it would be preferrable to have a single acpitable property which includes both generic information (such as the OEM ids) and custom tables currently passed via -acpitable. Do not saddle ourselves with legacy oem-id and oem-table-id properties, instead mark them as experimental. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20210402082128.13854-1-pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-03-31spapr: Fix typo in the patb_entry commentAlexey Kardashevskiy
There is no H_REGISTER_PROCESS_TABLE, it is H_REGISTER_PROC_TBL handler for which is still called h_register_process_table() though. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Message-Id: <20210225032335.64245-1-aik@ozlabs.ru> Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-03-26s390x: move S390_ADAPTER_SUPPRESSIBLEGerd Hoffmann
The definition S390_ADAPTER_SUPPRESSIBLE was moved to "cpu.h", per suggestion of Thomas Huth. From interface design perspective, IMHO, not a good thing as it belongs to the public interface of css_register_io_adapters(). We did this because CONFIG_KVM requeires NEED_CPU_H and Thomas, and other commenters did not like the consequences of that. Moving the interrupt related declarations to s390_flic.h was suggested by Cornelia Huck. Signed-off-by: Halil Pasic <pasic@linux.ibm.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Halil Pasic <pasic@linux.ibm.com> Message-Id: <20210317095622.2839895-2-kraxel@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2021-03-23Merge remote-tracking branch ↵Peter Maydell
'remotes/pmaydell/tags/pull-target-arm-20210323' into staging target-arm queue: * hw/arm/virt: Disable pl011 clock migration if needed * target/arm: Make M-profile VTOR loads on reset handle memory aliasing * target/arm: Set ARMMMUFaultInfo.level in user-only arm_cpu_tlb_fill # gpg: Signature made Tue 23 Mar 2021 14:26:09 GMT # gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE # gpg: issuer "peter.maydell@linaro.org" # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate] # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * remotes/pmaydell/tags/pull-target-arm-20210323: target/arm: Set ARMMMUFaultInfo.level in user-only arm_cpu_tlb_fill target/arm: Make M-profile VTOR loads on reset handle memory aliasing hw/core/loader: Add new function rom_ptr_for_as() memory: Add offset_in_region to flatview_cb arguments memory: Document flatview_for_each_range() memory: Make flatview_cb return bool, not int hw/arm/virt: Disable pl011 clock migration if needed Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-23Merge remote-tracking branch ↵Peter Maydell
'remotes/alistair/tags/pull-riscv-to-apply-20210322-2' into staging RISC-V PR for 6.0 This PR includes: - Fix for vector CSR access - Improvements to the Ibex UART device - PMP improvements and bug fixes - Hypervisor extension bug fixes - ramfb support for the virt machine - Fast read support for SST flash - Improvements to the microchip_pfsoc machine # gpg: Signature made Tue 23 Mar 2021 01:56:53 GMT # gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054 # gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full] # Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054 * remotes/alistair/tags/pull-riscv-to-apply-20210322-2: target/riscv: Prevent lost illegal instruction exceptions docs/system: riscv: Add documentation for 'microchip-icicle-kit' machine hw/riscv: microchip_pfsoc: Map EMMC/SD mux register hw/block: m25p80: Support fast read for SST flashes target/riscv: Add proper two-stage lookup exception detection target/riscv: Fix read and write accesses to vsip and vsie hw/riscv: allow ramfb on virt hw/riscv: Add fw_cfg support to virt target/riscv: Use background registers also for MSTATUS_MPV target/riscv: Make VSTIP and VSEIP read-only in hip target/riscv: Adjust privilege level for HLV(X)/HSV instructions target/riscv: flush TLB pages if PMP permission has been changed target/riscv: add log of PMP permission checking target/riscv: propagate PMP permission to TLB page hw/char: disable ibex uart receive if the buffer is full target/riscv: fix vs() to return proper error code Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-23hw/core/loader: Add new function rom_ptr_for_as()Peter Maydell
For accesses to rom blob data before or during reset, we have a function rom_ptr() which looks for a rom blob that would be loaded to the specified address, and returns a pointer into the rom blob data corresponding to that address. This allows board or CPU code to say "what is the data that is going to be loaded to this address?". However, this function does not take account of memory region aliases. If for instance a machine model has RAM at address 0x0000_0000 which is aliased to also appear at 0x1000_0000, a rom_ptr() query for address 0x0000_0000 will only return a match if the guest image provided by the user was loaded at 0x0000_0000 and not if it was loaded at 0x1000_0000, even though they are the same RAM and a run-time guest CPU read of 0x0000_0000 will read the data loaded to 0x1000_0000. Provide a new function rom_ptr_for_as() which takes an AddressSpace argument, so that it can check whether the MemoryRegion corresponding to the address is also mapped anywhere else in the AddressSpace and look for rom blobs that loaded to that alias. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210318174823.18066-5-peter.maydell@linaro.org
2021-03-23hw/arm/virt: Disable pl011 clock migration if neededGavin Shan
A clock is added by commit aac63e0e6ea3 ("hw/char/pl011: add a clock input") since v5.2.0 which corresponds to virt-5.2 machine type. It causes backwards migration failure from upstream to downstream (v5.1.0) when the machine type is specified with virt-5.1. This fixes the issue by following instructions from section "Connecting subsections to properties" in docs/devel/migration.rst. With this applied, the PL011 clock is migrated based on the machine type. virt-5.2 or newer: migration virt-5.1 or older: non-migration Cc: qemu-stable@nongnu.org # v5.2.0+ Fixes: aac63e0e6ea3 ("hw/char/pl011: add a clock input") Suggested-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Gavin Shan <gshan@redhat.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Message-id: 20210318023801.18287-1-gshan@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-22hw/riscv: microchip_pfsoc: Map EMMC/SD mux registerBin Meng
Since HSS commit c20a89f8dcac, the Icicle Kit reference design has been updated to use a register mapped at 0x4f000000 instead of a GPIO to control whether eMMC or SD card is to be used. With this support the same HSS image can be used for both eMMC and SD card boot flow, while previously two different board configurations were used. This is undocumented but one can take a look at the HSS code HSS_MMCInit() in services/mmc/mmc_api.c. With this commit, HSS image built from 2020.12 release boots again. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210322075248.136255-1-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-03-22hw/riscv: Add fw_cfg support to virtAsherah Connor
Provides fw_cfg for the virt machine on riscv. This enables using e.g. ramfb later. Signed-off-by: Asherah Connor <ashe@kivikakk.ee> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210318235041.17175-2-ashe@kivikakk.ee Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-03-22hw/char: disable ibex uart receive if the buffer is fullAlexander Wagner
Not disabling the UART leads to QEMU overwriting the UART receive buffer with the newest received byte. The rx_level variable is added to allow the use of the existing OpenTitan driver libraries. Signed-off-by: Alexander Wagner <alexander.wagner@ulal.de> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210309152130.13038-1-alexander.wagner@ulal.de Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-03-22acpi: Move setters/getters of oem fields to X86MachineStateMarian Postevca
The code that sets/gets oem fields is duplicated in both PC and MICROVM variants. This commit moves it to X86MachineState so that all x86 variants can use it and duplication is removed. Signed-off-by: Marian Postevca <posteuca@mutex.one> Message-Id: <20210221001737.24499-2-posteuca@mutex.one> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-03-22acpi: Move maximum size logic into acpi_add_rom_blob()David Hildenbrand
We want to have safety margins for all tables based on the table type. Let's move the maximum size logic into acpi_add_rom_blob() and make it dependent on the table name, so we don't have to replicate for each and every instance that creates such tables. Suggested-by: Laszlo Ersek <lersek@redhat.com> Cc: Alistair Francis <alistair.francis@xilinx.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Shannon Zhao <shannon.zhaosl@gmail.com> Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Richard Henderson <richard.henderson@linaro.org> Cc: Laszlo Ersek <lersek@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20210304105554.121674-4-david@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-03-22acpi: Set proper maximum size for "etc/table-loader" blobDavid Hildenbrand
The resizeable memory region / RAMBlock that is created for the cmd blob has a maximum size of whole host pages (e.g., 4k), because RAMBlocks work on full host pages. In addition, in i386 ACPI code: acpi_align_size(tables->linker->cmd_blob, ACPI_BUILD_ALIGN_SIZE); makes sure to align to multiples of 4k, padding with 0. For example, if our cmd_blob is created with a size of 2k, the maximum size is 4k - we cannot grow beyond that. Growing might be required due to guest action when rebuilding the tables, but also on incoming migration. This automatic generation of the maximum size used to be sufficient, however, there are cases where we cross host pages now when growing at runtime: we exceed the maximum size of the RAMBlock and can crash QEMU when trying to resize the resizeable memory region / RAMBlock: $ build/qemu-system-x86_64 --enable-kvm \ -machine q35,nvdimm=on \ -smp 1 \ -cpu host \ -m size=2G,slots=8,maxmem=4G \ -object memory-backend-file,id=mem0,mem-path=/tmp/nvdimm,size=256M \ -device nvdimm,label-size=131072,memdev=mem0,id=nvdimm0,slot=1 \ -nodefaults \ -device vmgenid \ -device intel-iommu Results in: Unexpected error in qemu_ram_resize() at ../softmmu/physmem.c:1850: qemu-system-x86_64: Size too large: /rom@etc/table-loader: 0x2000 > 0x1000: Invalid argument In this configuration, we consume exactly 4k (32 entries, 128 bytes each) when creating the VM. However, once the guest boots up and maps the MCFG, we also create the MCFG table and end up consuming 2 additional entries (pointer + checksum) -- which is where we try resizing the memory region / RAMBlock, however, the maximum size does not allow for it. Currently, we get the following maximum sizes for our different mutable tables based on behavior of resizeable RAMBlock: hw table max_size ------- --------------------------------------------------------- virt "etc/acpi/tables" ACPI_BUILD_TABLE_MAX_SIZE (0x200000) virt "etc/table-loader" HOST_PAGE_ALIGN(initial_size) virt "etc/acpi/rsdp" HOST_PAGE_ALIGN(initial_size) i386 "etc/acpi/tables" ACPI_BUILD_TABLE_MAX_SIZE (0x200000) i386 "etc/table-loader" HOST_PAGE_ALIGN(initial_size) i386 "etc/acpi/rsdp" HOST_PAGE_ALIGN(initial_size) microvm "etc/acpi/tables" ACPI_BUILD_TABLE_MAX_SIZE (0x200000) microvm "etc/table-loader" HOST_PAGE_ALIGN(initial_size) microvm "etc/acpi/rsdp" HOST_PAGE_ALIGN(initial_size) Let's set the maximum table size for "etc/table-loader" to 64k, so we can properly grow at runtime, which should be good enough for the future. Migration is not concerned with the maximum size of a RAMBlock, only with the used size - so existing setups are not affected. Of course, we cannot migrate a VM that would have crash when started on older QEMU from new QEMU to older QEMU without failing early on the destination when synchronizing the RAM state: qemu-system-x86_64: Size too large: /rom@etc/table-loader: 0x2000 > 0x1000: Invalid argument qemu-system-x86_64: error while loading state for instance 0x0 of device 'ram' qemu-system-x86_64: load of migration failed: Invalid argument We'll refactor the code next, to make sure we get rid of this implicit behavior for "etc/acpi/rsdp" as well and to make the code easier to grasp. Reviewed-by: Igor Mammedov <imammedo@redhat.com> Cc: Alistair Francis <alistair.francis@xilinx.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Shannon Zhao <shannon.zhaosl@gmail.com> Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Richard Henderson <richard.henderson@linaro.org> Cc: Laszlo Ersek <lersek@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20210304105554.121674-2-david@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-03-22pci: acpi: add _DSM method to PCI devicesIgor Mammedov
Implement _DSM according to: PCI Firmware Specification 3.1 4.6.7. DSM for Naming a PCI or PCI Express Device Under Operating Systems and wire it up to cold and hot-plugged PCI devices. Feature depends on ACPI hotplug being enabled (as that provides PCI devices descriptions in ACPI and MMIO registers that are reused to fetch acpi-index). acpi-index should work for - cold plugged NICs: $QEMU -device e1000,acpi-index=100 => 'eno100' - hot-plugged (monitor) device_add e1000,acpi-index=200,id=remove_me => 'eno200' - re-plugged (monitor) device_del remove_me (monitor) device_add e1000,acpi-index=1 => 'eno1' Windows also sees index under "PCI Label Id" field in properties dialog but otherwise it doesn't seem to have any effect. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20210315180102.3008391-6-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-03-22acpi: add aml_to_decimalstring() and aml_call6() helpersIgor Mammedov
it will be used by follow up patches Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20210315180102.3008391-5-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-03-22pci: introduce acpi-index property for PCI deviceIgor Mammedov
In x86/ACPI world, linux distros are using predictable network interface naming since systemd v197. Which on QEMU based VMs results into path based naming scheme, that names network interfaces based on PCI topology. With itm on has to plug NIC in exactly the same bus/slot, which was used when disk image was first provisioned/configured or one risks to loose network configuration due to NIC being renamed to actually used topology. That also restricts freedom to reshape PCI configuration of VM without need to reconfigure used guest image. systemd also offers "onboard" naming scheme which is preferred over PCI slot/topology one, provided that firmware implements: " PCI Firmware Specification 3.1 4.6.7. DSM for Naming a PCI or PCI Express Device Under Operating Systems " that allows to assign user defined index to PCI device, which systemd will use to name NIC. For example, using -device e1000,acpi-index=100 guest will rename NIC to 'eno100', where 'eno' is default prefix for "onboard" naming scheme. This doesn't require any advance configuration on guest side to com in effect at 'onboard' scheme takes priority over path based naming. Hope is that 'acpi-index' it will be easier to consume by management layer, compared to forcing specific PCI topology and/or having several disk image templates for different topologies and will help to simplify process of spawning VM from the same template without need to reconfigure guest NIC. This patch adds, 'acpi-index'* property and wires up a 32bit register on top of pci hotplug register block to pass index value to AML code at runtime. Following patch will add corresponding _DSM code and wire it up to PCI devices described in ACPI. *) name comes from linux kernel terminology Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20210315180102.3008391-3-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-03-19hw: Replace anti-social QOM type namesMarkus Armbruster
Several QOM type names contain ',': ARM,bitband-memory etraxfs,pic etraxfs,serial etraxfs,timer fsl,imx25 fsl,imx31 fsl,imx6 fsl,imx6ul fsl,imx7 grlib,ahbpnp grlib,apbpnp grlib,apbuart grlib,gptimer grlib,irqmp qemu,register SUNW,bpp SUNW,CS4231 SUNW,DBRI SUNW,DBRI.prom SUNW,fdtwo SUNW,sx SUNW,tcx xilinx,zynq_slcr xlnx,zynqmp xlnx,zynqmp-pmu-soc xlnx,zynq-xadc These are all device types. They can't be plugged with -device / device_add, except for xlnx,zynqmp-pmu-soc, and I doubt that one actually works. They *can* be used with -device / device_add to request help. Usability is poor, though: you have to double the comma, like this: $ qemu-system-x86_64 -device SUNW,,fdtwo,help Trap for the unwary. The fact that this was broken in device-introspect-test for more than six years until commit e27bd49876 fixed it demonstrates that "the unwary" includes seasoned developers. One QOM type name contains ' ': "ICH9 SMB". Because having to remember just one way to quote would be too easy. Rename the "SUNW,FOO types to "sun-FOO". Summarily replace ',' and ' ' by '-' in the other type names. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20210304140229.575481-2-armbru@redhat.com> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Paolo Bonzini <pbonzini@redhat.com>
2021-03-18Merge remote-tracking branch 'remotes/vivier/tags/q800-for-6.0-pull-request' ↵Peter Maydell
into staging q800 pull request 20210316 Several fixes for mac_via needed for future support of MacOS ROM # gpg: Signature made Tue 16 Mar 2021 21:14:42 GMT # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier/tags/q800-for-6.0-pull-request: mac_via: remove VIA1 timer optimisations mac_via: fix 60Hz VIA1 timer interval mac_via: rename VBL timer to 60Hz timer mac_via: don't re-inject ADB response when switching to IDLE state mac_via: allow long accesses to VIA registers mac_via: fix up adb_via_receive() trace events mac_via: switch rtc pram trace-events to use hex rather than decimal for addresses Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-17Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into ↵Peter Maydell
staging * add --enable/--disable-libgio to configure (Denis) * small fixes (Pavel, myself) * fuzzing update (Alexander) # gpg: Signature made Tue 16 Mar 2021 18:30:38 GMT # gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83 # gpg: issuer "pbonzini@redhat.com" # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini-gitlab/tags/for-upstream: qemu-timer: allow freeing a NULL timer hw/i8254: fix vmstate load scsi: fix sense code for EREMOTEIO Revert "accel: kvm: Add aligment assert for kvm_log_clear_one_slot" configure: add option to explicitly enable/disable libgio fuzz: move some DMA hooks fuzz: configure a sparse-mem device, by default memory: add a sparse memory device for fuzzing fuzz: add a am53c974 generic-fuzzer config fuzz: add instructions for building reproducers fuzz: add a script to build reproducers fuzz: don't leave orphan llvm-symbolizers around fuzz: fix the pro100 generic-fuzzer config MAINTAINERS: Cover fuzzer reproducer tests within 'Device Fuzzing' tests/qtest: Only run fuzz-virtio-scsi when virtio-scsi is available tests/qtest: Only run fuzz-megasas-test if megasas device is available Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-17Merge remote-tracking branch 'remotes/vivier/tags/m68k-for-6.0-pull-request' ↵Peter Maydell
into staging m68k pull request 20210315 Add m68k virt machine # gpg: Signature made Mon 15 Mar 2021 20:41:51 GMT # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier/tags/m68k-for-6.0-pull-request: m68k: add Virtual M68k Machine m68k: add a system controller m68k: add an interrupt controller hw/intc: add goldfish-pic hw/char: add goldfish-tty Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-16mac_via: rename VBL timer to 60Hz timerMark Cave-Ayland
According to the "Guide To The Macintosh Family Hardware", the 60Hz VIA1 timer on newer Macs such as the Quadra only exists for compatibility with old software and is no longer synced to the VBL interval. Rename the VBL timer to 60Hz timer to emphasise this and to prevent confusion when the real VBL interrupt (now handled as a NuBus slot interrupt) is added in future. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu> Message-Id: <20210311100505.22596-6-mark.cave-ayland@ilande.co.uk> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-03-16memory: add a sparse memory device for fuzzingAlexander Bulekov
For testing, it can be useful to simulate an enormous amount of memory (e.g. 2^64 RAM). This adds an MMIO device that acts as sparse memory. When something writes a nonzero value to a sparse-mem address, we allocate a block of memory. For now, since the only user of this device is the fuzzer, we do not track and free zeroed blocks. The device has a very low priority (so it can be mapped beneath actual RAM, and virtual device MMIO regions). Signed-off-by: Alexander Bulekov <alxndr@bu.edu> Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-03-16Merge remote-tracking branch 'remotes/kraxel/tags/usb-20210315-pull-request' ↵Peter Maydell
into staging usb: -usbdevice cleanup and un-deprecation. usb: split usb-storage. usb: misc fixes and cleanups. # gpg: Signature made Mon 15 Mar 2021 18:02:28 GMT # gpg: using RSA key A0328CFFB93A17A79901FE7D4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full] # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full] # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full] # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/usb-20210315-pull-request: usb/storage: clear csw on reset usb/storage: add kconfig symbols usb/storage move usb-storage device to separate source file usb/storage: move usb-bot device to separate source file usb/storage: move declarations to usb/msd.h header hw/usb: Extract VT82C686 UHCI PCI function into a new unit hw/usb/hcd-uhci: Expose generic prototypes to local header hw/southbridge: Add missing Kconfig dependency VT82C686 on USB_UHCI usb: Document the missing -usbdevice options usb: Un-deprecate -usbdevice (except for -usbdevice audio which gets removed) usb: remove '-usbdevice u2f-key' usb: remove support for -usbdevice parameters hw/usb/bus: Remove the "full-path" property Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-15m68k: add a system controllerLaurent Vivier
Add a system controller for the m68k-virt machine. This controller allows the kernel to power off or reset the machine. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210312214145.2936082-5-laurent@vivier.eu>
2021-03-15m68k: add an interrupt controllerLaurent Vivier
A (generic) copy of the GLUE device we already have for q800 to use with the m68k-virt machine. The q800 one would disappear in the future as q800 uses actually the djMEMC controller. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210312214145.2936082-4-laurent@vivier.eu>
2021-03-15hw/intc: add goldfish-picLaurent Vivier
Implement the goldfish pic device as defined in https://android.googlesource.com/platform/external/qemu/+/master/docs/GOLDFISH-VIRTUAL-HARDWARE.TXT Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210312214145.2936082-3-laurent@vivier.eu>
2021-03-15hw/char: add goldfish-ttyLaurent Vivier
Implement the goldfish tty device as defined in https://android.googlesource.com/platform/external/qemu/+/master/docs/GOLDFISH-VIRTUAL-HARDWARE.TXT and based on the kernel driver code: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/tty/goldfish.c Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210312214145.2936082-2-laurent@vivier.eu>
2021-03-15Merge remote-tracking branch ↵Peter Maydell
'remotes/stefanha-gitlab/tags/block-pull-request' into staging Pull request # gpg: Signature made Mon 15 Mar 2021 09:50:58 GMT # gpg: using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full] # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full] # Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8 * remotes/stefanha-gitlab/tags/block-pull-request: virtio-blk: Respect discard granularity Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-15Merge remote-tracking branch 'remotes/philmd/tags/avr-20210315' into stagingPeter Maydell
AVR patches queue - Only reset 'interrupt_request' mask once all interrupts executed - Documentation and typo fixes # gpg: Signature made Sun 14 Mar 2021 23:45:34 GMT # gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE # gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full] # Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE * remotes/philmd/tags/avr-20210315: target/avr: Fix interrupt execution target/avr: Fix some comment spelling errors hw/avr/arduino: List board schematic links hw/misc/led: Add yellow LED Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-15usb/storage: move declarations to usb/msd.h headerGerd Hoffmann
In preparation for splitting the usb-storage.c file move declarations to the new usb/msd.h header file. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-Id: <20210312090425.772900-2-kraxel@redhat.com>
2021-03-15usb: remove support for -usbdevice parametersPaolo Bonzini
No device needs them anymore and in fact they're undocumented. Remove the code. The only change in behavior is that "-usbdevice braille:hello" now reports an error, which is a bugfix. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210310173323.1422754-2-thuth@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2021-03-15hw/usb/bus: Remove the "full-path" propertyThomas Huth
This property was only required for the pc-1.0 and earlier machine types. Since these have been removed now, we can delete the property as well. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210302120152.118042-1-thuth@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2021-03-15Merge remote-tracking branch ↵Peter Maydell
'remotes/bkoppelmann2/tags/pull-tricore-20210314' into staging - Added triboard with tc27x_soc - Cleaned up get_physical_address() - Fixed corner case bugs in OPC2_32_RRPW_IMASK and OPC2_32_RRPW_IMASK insns # gpg: Signature made Sun 14 Mar 2021 13:53:11 GMT # gpg: using RSA key 6E636A7E83F2DD0CFA6E6E370AD2C6396B69CA14 # gpg: issuer "kbastian@mail.uni-paderborn.de" # gpg: Good signature from "Bastian Koppelmann <kbastian@mail.uni-paderborn.de>" [full] # Primary key fingerprint: 6E63 6A7E 83F2 DD0C FA6E 6E37 0AD2 C639 6B69 CA14 * remotes/bkoppelmann2/tags/pull-tricore-20210314: target/tricore: Fix OPC2_32_RRPW_EXTR for width=0 target/tricore: Fix imask OPC2_32_RRPW_IMASK for r3+1 == r2 tricore: fixed faulty conditions for extr and imask target/tricore: Remove unused definitions target/tricore: Pass MMUAccessType to get_physical_address() target/tricore: Replace magic value by MMU_DATA_LOAD definition tricore: added triboard with tc27x_soc Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-15virtio-blk: Respect discard granularityAkihiko Odaki
Report the configured granularity for discard operation to the guest. If this is not set use the block size. Since until now we have ignored the configured discard granularity and always reported the block size, let's add 'report-discard-granularity' property and disable it for older machine types to avoid migration issues. Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20210225001239.47046-1-akihiko.odaki@gmail.com>
2021-03-15hw/misc/led: Add yellow LEDPhilippe Mathieu-Daudé
Add the yellow "lime" LED. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Michael Rolnik <mrolnik@gmail.com> Message-Id: <20210313165445.2113938-2-f4bug@amsat.org>
2021-03-14tricore: added triboard with tc27x_socAndreas Konopik
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Andreas Konopik <andreas.konopik@efs-auto.de> Signed-off-by: David Brenken <david.brenken@efs-auto.de> Signed-off-by: Georg Hofstetter <georg.hofstetter@efs-auto.de> Signed-off-by: Robert Rasche <robert.rasche@efs-auto.de> Signed-off-by: Lars Biermanski <lars.biermanski@efs-auto.de> Message-Id: <20201109165055.10508-2-david.brenken@efs-auto.org> Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
2021-03-14Merge remote-tracking branch ↵Peter Maydell
'remotes/pmaydell/tags/pull-target-arm-20210314' into staging target-arm queue: * versal: Support XRAMs and XRAM controller * smmu: Various minor bug fixes * SVE emulation: fix bugs handling odd vector lengths * allwinner-sun8i-emac: traverse transmit queue using TX_CUR_DESC register value * tests/acceptance: fix orangepi-pc acceptance tests * hw/timer/sse-timer: Propagate eventual error in sse_timer_realize() * hw/arm/virt: KVM: The IPA lower bound is 32 * npcm7xx: support MFT module * pl110, pxa2xx_lcd: tidy up template headers # gpg: Signature made Sun 14 Mar 2021 13:17:43 GMT # gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE # gpg: issuer "peter.maydell@linaro.org" # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate] # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * remotes/pmaydell/tags/pull-target-arm-20210314: (39 commits) hw/display/pxa2xx: Inline template header hw/display/pxa2xx: Apply whitespace-only coding style fixes to template header hw/display/pxa2xx: Apply brace-related coding style fixes to template header hw/display/pxa2xx: Remove use of BITS in pxa2xx_template.h hw/display/pxa2xx_lcd: Remove dest_width state field hw/display/pxa2xx_lcd: Remove dead code for non-32-bpp surfaces hw/display/pl110: Remove use of BITS from pl110_template.h hw/display/pl110: Pull included-once parts of template header into pl110.c hw/display/pl110: Remove dead code for non-32-bpp surfaces tests/qtest: Test PWM fan RPM using MFT in PWM test hw/arm: Connect PWM fans in NPCM7XX boards hw/arm: Add MFT device to NPCM7xx Soc hw/misc: Add NPCM7XX MFT Module hw/misc: Add GPIOs for duty in NPCM7xx PWM hw/arm/virt: KVM: The IPA lower bound is 32 accel: kvm: Fix kvm_type invocation hw/timer/sse-timer: Propagate eventual error in sse_timer_realize() tests/acceptance: drop ARMBIAN_ARTIFACTS_CACHED condition for orangepi-pc, cubieboard tests tests/acceptance: update sunxi kernel from armbian to 5.10.16 tests/acceptance/boot_linux_console: change URL for test_arm_orangepi_bionic_20_08 ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-12hw/arm: Connect PWM fans in NPCM7XX boardsHao Wu
This patch adds fan_splitters (split IRQs) in NPCM7XX boards. Each fan splitter corresponds to 1 PWM output and can connect to multiple fan inputs (MFT devices). In NPCM7XX boards(NPCM750 EVB and Quanta GSJ boards), we initializes these splitters and connect them to their corresponding modules according their specific device trees. Reviewed-by: Doug Evans <dje@google.com> Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20210311180855.149764-5-wuhaotsh@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-12hw/arm: Add MFT device to NPCM7xx SocHao Wu
This patch adds the recently implemented MFT device to the NPCM7XX SoC file. Reviewed-by: Doug Evans <dje@google.com> Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Message-id: 20210311180855.149764-4-wuhaotsh@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-12hw/misc: Add NPCM7XX MFT ModuleHao Wu
This patch implements Multi Function Timer (MFT) module for NPCM7XX. This module is mainly used to configure PWM fans. It has just enough functionality to make the PWM fan kernel module work. The module takes two input, the max_rpm of a fan (modifiable via QMP) and duty cycle (a GPIO from the PWM module.) The actual measured RPM is equal to max_rpm * duty_cycle / NPCM7XX_PWM_MAX_DUTY. The RPM is measured as a counter compared to a prescaled input clock. The kernel driver reads this counter and report to user space. Refs: https://github.com/torvalds/linux/blob/master/drivers/hwmon/npcm750-pwm-fan.c Reviewed-by: Doug Evans <dje@google.com> Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Message-id: 20210311180855.149764-3-wuhaotsh@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-12hw/misc: Add GPIOs for duty in NPCM7xx PWMHao Wu
This patch adds GPIOs in NPCM7xx PWM module for its duty values. The purpose of this is to connect it to the MFT module to provide an input for measuring a PWM fan's RPM. Each PWM module has NPCM7XX_PWM_PER_MODULE of GPIOs, each one corresponds to one PWM instance and can connect to multiple fan instances in MFT. Reviewed-by: Doug Evans <dje@google.com> Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20210311180855.149764-2-wuhaotsh@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-12accel: kvm: Fix kvm_type invocationAndrew Jones
Prior to commit f2ce39b4f067 a MachineClass kvm_type method only needed to be registered to ensure it would be executed. With commit f2ce39b4f067 a kvm-type machine property must also be specified. hw/arm/virt relies on the kvm_type method to pass its selected IPA limit to KVM, but this is not exposed as a machine property. Restore the previous functionality of invoking kvm_type when it's present. Fixes: f2ce39b4f067 ("vl: make qemu_get_machine_opts static") Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 20210310135218.255205-2-drjones@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-12hw/arm: versal: Add support for the XRAMsEdgar E. Iglesias
Connect the support for the Versal Accelerator RAMs (XRAMs). Reviewed-by: Luc Michel <luc@lmichel.fr> Acked-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 20210308224637.2949533-3-edgar.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-15 03:04:50 +0000