aboutsummaryrefslogtreecommitdiff
path: root/include/hw
AgeCommit message (Collapse)Author
2016-03-16hw/intc: Add (new) ASPEED VIC device modelAndrew Jeffery
Implement a basic ASPEED VIC device model for the AST2400 SoC[1], with enough functionality to boot an aspeed_defconfig Linux kernel. The model implements the 'new' (revised) register set: While the hardware exposes both the new and legacy register sets, accesses to the model's legacy register set will not be serviced (however the access will be logged). [1] http://www.aspeedtech.com/products.php?fPath=20&rId=376 Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1458096317-25223-3-git-send-email-andrew@aj.id.au Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-16hw/timer: Add ASPEED timer device modelAndrew Jeffery
Implement basic ASPEED timer functionality for the AST2400 SoC[1]: Up to 8 timers can independently be configured, enabled, reset and disabled. Some hardware features are not implemented, namely clock value matching and pulse generation, but the implementation is enough to boot the Linux kernel configured with aspeed_defconfig. [1] http://www.aspeedtech.com/products.php?fPath=20&rId=376 Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1458096317-25223-2-git-send-email-andrew@aj.id.au Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-16i.MX: Add i.MX6 CCM and ANALOG device.Jean-Christophe Dubois
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Message-id: 9fa80b4d8c5d0f50c94e77d74f952a7a665e168f.1456868959.git.jcd@tribudubois.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-16i.MX: Add the CLK_IPG_HIGH clockJean-Christophe Dubois
EPIT, GPT and other i.MX timers are using "abstract" clocks among which a CLK_IPG_HIGH clock. On i.MX25 and i.MX31 CLK_IPG and CLK_IPG_HIGH are mapped to the same clock but on other SOC like i.MX6 they are mapped to distinct clocks. This patch add the CLK_IPG_HIGH to prepare for SOC where these 2 clocks are different. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Message-id: 224bf650194760284cb40630e985867e1373276a.1456868959.git.jcd@tribudubois.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-16i.MX: Remove CCM useless clock computation handling.Jean-Christophe Dubois
Most clocks supported by the CCM are useless to the qemu framework. Only clocks related to timers (EPIT, GPT, PWM, WATCHDOG, ...) are usefull to QEMU code. Therefore this patch removes clock computation handling for all clocks but: * CLK_NONE, * CLK_IPG, * CLK_32k Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Message-id: 9e7222efb349801032e60c0f6b0fbad0e5dcf648.1456868959.git.jcd@tribudubois.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-16i.MX: Rename CCM NOCLK to CLK_NONE for naming consistency.Jean-Christophe Dubois
This way all CCM clock defines/enums are named CLK_XXX Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Message-id: 8537df765c1713625c7a8b9aca4c7ca60b42e0c0.1456868959.git.jcd@tribudubois.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-16loader: Fix incorrect parameter name in load_image_mr() macroJens Wiklander
Fix a typo in the load_image_mr() macro: 'mr' was written when the parameter name is '_mr'. (This had no visible effects since the single use of the macro used 'mr' as the argument.) Fixes 76151cacfe956248a25b38b5e8429465584f47bb "loader: Add load_image_mr() to load ROM image to a MemoryRegion" Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-16vfio: Eliminate vfio_container_ioctl()David Gibson
vfio_container_ioctl() was a bad interface that bypassed abstraction boundaries, had semantics that sat uneasily with its name, and was unsafe in many realistic circumstances. Now that spapr-pci-vfio-host-bridge has been folded into spapr-pci-host-bridge, there are no more users, so remove it. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru> Acked-by: Alex Williamson <alex.williamson@redhat.com>
2016-03-16spapr_pci: Remove finish_realize hookDavid Gibson
Now that spapr-pci-vfio-host-bridge is reduced to just a stub, there is only one implementation of the finish_realize hook in sPAPRPHBClass. So, we can fold that implementation into its (single) caller, and remove the hook. That's the last thing left in sPAPRPHBClass, so that can go away as well. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
2016-03-16spapr_pci: (Mostly) remove spapr-pci-vfio-host-bridgeDavid Gibson
Now that the regular spapr-pci-host-bridge can handle EEH, there are only two things that spapr-pci-vfio-host-bridge does differently: 1. automatically sizes its DMA window to match the host IOMMU 2. checks if the attached VFIO container is backed by the VFIO_SPAPR_TCE_IOMMU type on the host (1) is not particularly useful, since the default window used by the regular host bridge will work with the host IOMMU configuration on all current systems anyway. Plus, automatically changing guest visible configuration (such as the DMA window) based on host settings is generally a bad idea. It's not definitively broken, since spapr-pci-vfio-host-bridge is only supposed to support VFIO devices which can't be migrated anyway, but still. (2) is not really useful, because if a guest tries to configure EEH on a different host IOMMU, the first call will fail and that will be that. It's possible there are scripts or tools out there which expect spapr-pci-vfio-host-bridge, so we don't remove it entirely. This patch reduces it to just a stub for backwards compatibility. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
2016-03-16spapr_pci: Allow EEH on spapr-pci-host-bridgeDavid Gibson
Now that the EEH code is independent of the special spapr-vfio-pci-host-bridge device, we can allow it on all spapr PCI host bridges instead. We do this by changing spapr_phb_eeh_available() to be based on the vfio_eeh_as_ok() call instead of the host bridge class. Because the value of vfio_eeh_as_ok() can change with devices being hotplugged or unplugged, this can potentially lead to some strange edge cases where the guest starts using EEH, then it starts failing because of a change in status. However, it's not really any worse than the current situation. Cases that would have worked previously will still work (i.e. VFIO devices from at most one VFIO IOMMU group per vPHB), it's just that it's no longer necessary to use spapr-vfio-pci-host-bridge with the groupid pre-specified. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
2016-03-16spapr_pci: Eliminate class callbacksDavid Gibson
The EEH operations in the spapr-vfio-pci-host-bridge no longer rely on the special groupid field in sPAPRPHBVFIOState. So we can simplify, removing the class specific callbacks with direct calls based on a simple spapr_phb_eeh_enabled() helper. For now we implement that in terms of a boolean in the class, but we'll continue to clean that up later. On its own this is a rather strange way of doing things, but it's a useful intermediate step to further cleanups. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
2016-03-16vfio: Start improving VFIO/EEH interfaceDavid Gibson
At present the code handling IBM's Enhanced Error Handling (EEH) interface on VFIO devices operates by bypassing the usual VFIO logic with vfio_container_ioctl(). That's a poorly designed interface with unclear semantics about exactly what can be operated on. In particular it operates on a single vfio container internally (hence the name), but takes an address space and group id, from which it deduces the container in a rather roundabout way. groupids are something that code outside vfio shouldn't even be aware of. This patch creates new interfaces for EEH operations. Internally we have vfio_eeh_container_op() which takes a VFIOContainer object directly. For external use we have vfio_eeh_as_ok() which determines if an AddressSpace is usable for EEH (at present this means it has a single container with exactly one group attached), and vfio_eeh_as_op() which will perform an operation on an AddressSpace in the unambiguous case, and otherwise returns an error. This interface still isn't great, but it's enough of an improvement to allow a number of cleanups in other places. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru> Acked-by: Alex Williamson <alex.williamson@redhat.com>
2016-03-15Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
vhost, virtio, pci, pc, acpi nvdimm work sparse cpu id rework ipmi enhancements fixes all over the place pxb option to tweak chassis number Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Tue 15 Mar 2016 14:33:10 GMT using RSA key ID D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" * remotes/mst/tags/for_upstream: (51 commits) hw/acpi: fix GSI links UID ipmi: add some local variables in ipmi_sdr_init ipmi: remove the need of an ending record in the SDR table ipmi: use a function to initialize the SDR table ipmi: add a realize function to the device class ipmi: add rsp_buffer_set_error() helper ipmi: remove IPMI_CHECK_RESERVATION() macro ipmi: replace IPMI_ADD_RSP_DATA() macro with inline helpers ipmi: remove IPMI_CHECK_CMD_LEN() macro MAINTAINERS: machine core MAINTAINERS: Add an entry for virtio header files pc: acpi: clarify why possible LAPIC entries must be present in MADT pc: acpi: drop cpu->found_cpus bitmap pc: acpi: create Processor and Notify objects only for valid lapics pc: acpi: create MADT.lapic entries only for valid lapics pc: acpi: SRAT: create only valid processor lapic entries pc: acpi: cleanup qdev_get_machine() calls machine: introduce MachineClass.possible_cpu_arch_ids() hook pc: init pcms->apic_id_limit once and use it throughout pc.c pc: acpi: remove NOP assignment ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-14Merge remote-tracking branch 'remotes/awilliam/tags/vfio-update-20160311.0' ↵Peter Maydell
into staging VFIO updates 2016-03-11 - Allow devices to be specified via sysfs path (Alex Williamson) - vfio region helpers and generalization for future device specific regions (Alex Williamson) - Automatic ROM device ID and checksum fixup (Alex Williamson) - Split VGA setup to allow enabling VGA from quirks (Alex Williamson) - Remove fixed string limit for ROM MemoryRegion name (Neo Jia) - MAINTAINERS update (Thomas Huth) # gpg: Signature made Fri 11 Mar 2016 15:55:31 GMT using RSA key ID 3BB08B22 # gpg: Good signature from "Alex Williamson <alex.williamson@redhat.com>" # gpg: aka "Alex Williamson <alex@shazbot.org>" # gpg: aka "Alex Williamson <alwillia@redhat.com>" # gpg: aka "Alex Williamson <alex.l.williamson@gmail.com>" * remotes/awilliam/tags/vfio-update-20160311.0: MAINTAINERS: Add entry for the include/hw/vfio/ folder vfio/pci: replace fixed string limit by g_strdup_printf vfio/pci: Split out VGA setup vfio/pci: Fixup PCI option ROMs vfio/pci: Convert all MemoryRegion to dynamic alloc and consistent functions vfio: Generalize region support vfio: Wrap VFIO_DEVICE_GET_REGION_INFO vfio: Add sysfsdev property for pci & platform Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-11machine: introduce MachineClass.possible_cpu_arch_ids() hookIgor Mammedov
on x86 currently range 0..max_cpus is used to generate architecture-dependent CPU ID (APIC Id) for each present and possible CPUs. However architecture-dependent CPU IDs list could be sparse and code that needs to enumerate all IDs (ACPI) ended up doing guess work enumerating all possible and impossible IDs up to apic_id_limit = x86_cpu_apic_id_from_index(max_cpus). That leads to creation of MADT entries and Processor objects in ACPI tables for not possible CPUs. Fix it by allowing board specify a concrete list of CPU IDs accourding its own rules (which for x86 depends on topology). So that code that needs this list could request it from board instead of trying to guess what IDs are correct on its own. This interface will also allow to help making AML part of CPU hotplug target independent so it could be reused for ARM target. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2016-03-11nvdimm acpi: emulate dsm methodXiao Guangrong
Emulate dsm method after IO VM-exit Currently, we only introduce the framework and no function is actually supported Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-03-11nvdimm acpi: initialize the resource used by NVDIMM ACPIXiao Guangrong
32 bits IO port starting from 0x0a18 in guest is reserved for NVDIMM ACPI emulation. The table, NVDIMM_DSM_MEM_FILE, will be patched into NVDIMM ACPI binary code OSPM uses this port to tell QEMU the final address of the DSM memory and notify QEMU to emulate the DSM method Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-03-11ich9lpc: fix typoCao jin
change some "rbca" to "rcrb"(root complex register block) while the other to "rcba"(root complex base address). Bonus: add more comments and fix some indentation. Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-03-11msi_supported -> msi_nonbrokenMichael S. Tsirkin
Rename controller flag to make it clearer what it means. Add some documentation as well. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-03-11fdc: add function to determine drive chs limitsRoman Kagan
When populating ACPI objects for floppy drives one needs to provide the maximum values for cylinder, sector, and head number the drive supports. This patch adds a function that iterates through the array of predefined floppy drive formats and returns the maximum values of c, h, s, out of those matching the given floppy drive type. Signed-off-by: Roman Kagan <rkagan@virtuozzo.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Marcel Apfelbaum <marcel@redhat.com> Cc: John Snow <jsnow@redhat.com> Cc: Laszlo Ersek <lersek@redhat.com> Cc: Kevin O'Connor <kevin@koconnor.net> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com>
2016-03-11i386: expose floppy drive CMOS typeRoman Kagan
Make it possible to query the CMOS type of a floppy drive outside of the source file where it's defined. It will allow to properly populate the corresponding ACPI objects and thus enable Windows on BIOS-less systems to access the floppy drives. Signed-off-by: Roman Kagan <rkagan@virtuozzo.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Marcel Apfelbaum <marcel@redhat.com> Cc: John Snow <jsnow@redhat.com> Cc: Laszlo Ersek <lersek@redhat.com> Cc: Kevin O'Connor <kevin@koconnor.net> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-03-11acpi: add build_append_named_dword, returning an offset in bufferMichael S. Tsirkin
This is a very limited form of support for runtime patching - similar in functionality to what we can do with ACPI_EXTRACT macros in python, but implemented in C. This is to allow ACPI code direct access to data tables - which is exactly what DataTableRegion is there for, except no known windows release so far implements DataTableRegion. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-03-11acpi: allow using object as offset for OperationRegionXiao Guangrong
Extend aml_operation_region() to use object as offset Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-03-11acpi: add aml_concatenate()Xiao Guangrong
It will be used by nvdimm acpi Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-03-11acpi: add aml_create_field()Xiao Guangrong
It will be used by nvdimm acpi Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-03-10vfio: Generalize region supportAlex Williamson
Both platform and PCI vfio drivers create a "slow", I/O memory region with one or more mmap memory regions overlayed when supported by the device. Generalize this to a set of common helpers in the core that pulls the region info from vfio, fills the region data, configures slow mapping, and adds helpers for comleting the mmap, enable/disable, and teardown. This can be immediately used by the PCI MSI-X code, which needs to mmap around the MSI-X vector table. This also changes VFIORegion.mem to be dynamically allocated because otherwise we don't know how the caller has allocated VFIORegion and therefore don't know whether to unreference it to destroy the MemoryRegion or not. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2016-03-10vfio: Wrap VFIO_DEVICE_GET_REGION_INFOAlex Williamson
In preparation for supporting capability chains on regions, wrap ioctl(VFIO_DEVICE_GET_REGION_INFO) so we don't duplicate the code for each caller. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2016-03-10vfio: Add sysfsdev property for pci & platformAlex Williamson
vfio-pci currently requires a host= parameter, which comes in the form of a PCI address in [domain:]<bus:slot.function> notation. We expect to find a matching entry in sysfs for that under /sys/bus/pci/devices/. vfio-platform takes a similar approach, but defines the host= parameter to be a string, which can be matched directly under /sys/bus/platform/devices/. On the PCI side, we have some interest in using vfio to expose vGPU devices. These are not actual discrete PCI devices, so they don't have a compatible host PCI bus address or a device link where QEMU wants to look for it. There's also really no requirement that vfio can only be used to expose physical devices, a new vfio bus and iommu driver could expose a completely emulated device. To fit within the vfio framework, it would need a kernel struct device and associated IOMMU group, but those are easy constraints to manage. To support such devices, which would include vGPUs, that honor the VFIO PCI programming API, but are not necessarily backed by a unique PCI address, add support for specifying any device in sysfs. The vfio API already has support for probing the device type to ensure compatibility with either vfio-pci or vfio-platform. With this, a vfio-pci device could either be specified as: -device vfio-pci,host=02:00.0 or -device vfio-pci,sysfsdev=/sys/devices/pci0000:00/0000:00:1c.0/0000:02:00.0 or even -device vfio-pci,sysfsdev=/sys/bus/pci/devices/0000:02:00.0 When vGPU support comes along, this might look something more like: -device vfio-pci,sysfsdev=/sys/devices/virtual/intel-vgpu/vgpu0@0000:00:02.0 NB - This is only a made up example path The same change is made for vfio-platform, specifying sysfsdev has precedence over the old host option. Tested-by: Eric Auger <eric.auger@linaro.org> Reviewed-by: Eric Auger <eric.auger@linaro.org> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2016-03-10s390x: Introduce S390MachineClassJanosch Frank
As we now have the new machine definitions, that let us disable/enable machine options more easily, we need a way to save them and make them publicly available. The new s390-virtio-ccw.h header exports the s390 ccw machine state and class, so they can be easily used in other C files. Signed-off-by: Janosch Frank <frankja@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-03-08pc: fw_cfg: move ioport base constant to pc.hGabriel L. Somlo
Move BIOS_CFG_IOPORT define from pc.c to pc.h, and rename it to FW_CFG_IO_BASE. Cc: Marc Marí <markmb@redhat.com> Signed-off-by: Gabriel Somlo <somlo@cmu.edu> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Marc Marí <markmb@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 1455906029-25565-3-git-send-email-somlo@cmu.edu Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-03-08fw_cfg: expose control register size in fw_cfg.hGabriel L. Somlo
Expose the size of the control register (FW_CFG_CTL_SIZE) in fw_cfg.h. Add comment to fw_cfg_io_realize() pointing out that since the 8-bit data register is always subsumed by the 16-bit control register in the port I/O case, we use the control register width as the *total* width of the (classic, non-DMA) port I/O region reserved for the device. Cc: Marc Marí <markmb@redhat.com> Signed-off-by: Gabriel Somlo <somlo@cmu.edu> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Marc Marí <markmb@redhat.com> Message-id: 1455906029-25565-2-git-send-email-somlo@cmu.edu Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-03-04arm: boot: Support big-endian elfsPeter Crosthwaite
Support ARM big-endian ELF files in system-mode emulation. When loading an elf, determine the endianness mode expected by the elf, and set the relevant CPU state accordingly. With this, big-endian modes are now fully supported via system-mode LE, so there is no need to restrict the elf loading to the TARGET endianness so the ifdeffery on TARGET_WORDS_BIGENDIAN goes away. Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: fix typo in comments] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-04loader: Add data swap option to load-elfPeter Crosthwaite
Some CPUs are of an opposite data-endianness to other components in the system. Sometimes elfs have the data sections layed out with this CPU data-endianness accounting for when loaded via the CPU, so byte swaps (relative to other system components) will occur. The leading example, is ARM's BE32 mode, which is is basically LE with address manipulation on half-word and byte accesses to access the hw/byte reversed address. This means that word data is invariant across LE and BE32. This also means that instructions are still LE. The expectation is that the elf will be loaded via the CPU in this endianness scheme, which means the data in the elf is reversed at compile time. As QEMU loads via the system memory directly, rather than the CPU, we need a mechanism to reverse elf data endianness to implement this possibility. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-04loader: load_elf(): Add doc commentPeter Crosthwaite
Document the usage of load_elf() for clarity on current features. Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-04loader: add API to load elf headerPeter Crosthwaite
Add an API to load an elf header header from a file. Populates a buffer with the header contents, as well as a boolean for whether the elf is 64b or not. Both arguments are optional. Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: Fix typo in comment] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-04loader: Add load_image_mr() to load ROM image to a MemoryRegionPeter Maydell
Add a new function load_image_mr(), which behaves like load_image_targphys() except that it loads the ROM image to a specified MemoryRegion rather than to a specified physical address. This is useful when a ROM blob needs to be loaded to a particular flash or ROM device but the address of that device in the machine's address space is not known. (For instance, ROMs in devices, or ROMs which might exist in a different address space to the system address space.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1455288361-30117-3-git-send-email-peter.maydell@linaro.org Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2016-03-04hw/arm/virt: Provide a secure-only RAM if booting in Secure modePeter Maydell
If we're booting in Secure mode, provide a secure-only RAM (just 16MB) so that secure firmware has somewhere to run from that won't be accessible to the Non-secure guest. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1455288361-30117-2-git-send-email-peter.maydell@linaro.org
2016-02-29Merge remote-tracking branch 'remotes/kraxel/tags/pull-fw-cfg-20160226-1' ↵Peter Maydell
into staging fw_cfg: unbreak migration compatibility for 2.4 and earlier machines # gpg: Signature made Fri 26 Feb 2016 09:45:50 GMT using RSA key ID D3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" * remotes/kraxel/tags/pull-fw-cfg-20160226-1: fw_cfg: unbreak migration compatibility for 2.4 and earlier machines Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-28xics: report errors with the QEMU Error APIGreg Kurz
Using the return value to report errors is error prone: - xics_alloc() returns -1 on error but spapr_vio_busdev_realize() errors on 0 - xics_alloc_block() returns the unclear value of ics->offset - 1 on error but both rtas_ibm_change_msi() and spapr_phb_realize() error on 0 This patch adds an errp argument to xics_alloc() and xics_alloc_block() to report errors. The return value of these functions is a valid IRQ number if errp is NULL. It is undefined otherwise. The corresponding error traces get promotted to error messages. Note that the "can't allocate IRQ" error message in spapr_vio_busdev_realize() also moves to xics_alloc(). Similar error message consolidation isn't really applicable to xics_alloc_block() because callers have extra context (device config address, MSI or MSIX). This fixes the issues mentioned above. Based on previous work from Brian W. Hart. Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-02-28migration: allow machine to enforce configuration section migrationGreg Kurz
Migration of pseries-2.3 doesn't have configuration section. Unfortunately, QEMU 2.4/2.4.1/2.5 are buggy and always stream and expect the configuration section, and break migration both ways. This patch introduces a property which allows to enforce a configuration section for machines who don't have one. It can be set at startup: -machine enforce-config-section=on or later from the QEMU monitor: qom-set /machine enforce-config-section on It is up to the tooling to set or unset this property according to the version of the QEMU at the other end of the pipe. Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Reviewed-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-02-26sdhci: add quirk property for card insert interrupt status on Raspberry PiAndrew Baumann
This quirk is a workaround for the following hardware behaviour, on which UEFI (specifically, the bootloader for Windows on Pi2) depends: 1. at boot with an SD card present, the interrupt status/enable registers are initially zero 2. upon enabling it in the interrupt enable register, the card insert bit in the interrupt status register is immediately set 3. after a subsequent controller reset, the card insert interrupt does not fire, even if enabled in the interrupt enable register Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com> Message-id: 1456436130-7048-3-git-send-email-Andrew.Baumann@microsoft.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-26sdhci: Revert "add optional quirk property to disable card insertion/removal ↵Andrew Baumann
interrupts" This reverts commit 723697551a7e926abe7d3c7f2966012b8075143d. This change was poorly tested on my part. It squelched card insertion interrupts on reset, but that was not necessary because sdhci_reset() clears all the registers (via the call to memset), so the subsequent sdhci_insert_eject_cb() call never sees the card insert interrupt enabled. However, not calling the insert_eject_cb results in prnsts remaining 0, when it actually needs to be updated to indicate card presence and R/O status. Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com> Message-id: 1456436130-7048-2-git-send-email-Andrew.Baumann@microsoft.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-26fw_cfg: unbreak migration compatibility for 2.4 and earlier machinesLaszlo Ersek
When I reviewed Marc's fw_cfg DMA patches, I completely missed that the way we set dma_enabled would break migration. Gerd explained the right way (see reference below): dma_enabled should be set to true by default, and only true->false transitions should be possible: - when the user requests that with -global fw_cfg_mem.dma_enabled=off or -global fw_cfg_io.dma_enabled=off as appropriate for the platform, - when HW_COMPAT_2_4 dictates it, - when board code initializes fw_cfg without requesting DMA support. Cc: Marc Marí <markmb@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Alexandre DERUMIER <aderumier@odiso.com> Cc: qemu-stable@nongnu.org Ref: http://thread.gmane.org/gmane.comp.emulators.qemu/390272/focus=391042 Ref: https://bugs.launchpad.net/qemu/+bug/1536487 Suggested-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Laszlo Ersek <lersek@redhat.com> Message-id: 1455823860-22268-1-git-send-email-lersek@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-02-25Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
vhost, virtio, pci, pc Fixes all over the place. virtio dataplane migration support. Old q35 machine types removed. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Thu 25 Feb 2016 11:16:46 GMT using RSA key ID D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" * remotes/mst/tags/for_upstream: (21 commits) q35: No need to check gigabyte_align q35: Remove unused q35-acpi-dsdt.aml file ich9: Remove enable_tco arguments from init functions machine: Remove no_tco field q35: Remove old machine versions tests/vhost-user-bridge: fix build on 32 bit systems vring: remove virtio-scsi: do not use vring in dataplane virtio-blk: do not use vring in dataplane virtio-blk: fix "disabled data plane" mode virtio: export vring_notify as virtio_should_notify virtio: add AioContext-specific function for host notifiers vring: make vring_enable_notification return void block-migration: acquire AioContext as necessary pci core: function pci_bus_init() cleanup pci core: function pci_host_bus_register() cleanup balloon: Use only 'pc-dimm' type dimm for ballooning virtio-balloon: rewrite get_current_ram_size() move get_current_ram_size to virtio-balloon.c vhost-user: don't merge regions with different fds ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-25ich9: Remove enable_tco arguments from init functionsEduardo Habkost
The enable_tco arguments are always true, so they are not needed anymore. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2016-02-25machine: Remove no_tco fieldEduardo Habkost
The field is always set to zero, so it is not necessary anymore. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2016-02-25vring: removePaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-02-25virtio-scsi: do not use vring in dataplanePaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-02-25virtio-blk: do not use vring in dataplanePaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-01-10 13:09:24 +0000