aboutsummaryrefslogtreecommitdiff
path: root/include/hw
AgeCommit message (Collapse)Author
2020-11-01vfio: Add vfio_get_object callback to VFIODeviceOpsKirti Wankhede
Hook vfio_get_object callback for PCI devices. Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com> Reviewed-by: Neo Jia <cjia@nvidia.com> Suggested-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-11-01vfio: Add function to unmap VFIO regionKirti Wankhede
This function will be used for migration region. Migration region is mmaped when migration starts and will be unmapped when migration is complete. Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com> Reviewed-by: Neo Jia <cjia@nvidia.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-11-01Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
pc,pci,vhost,virtio: misc fixes Just a bunch of bugfixes all over the place. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Fri 30 Oct 2020 12:44:31 GMT # gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469 # gpg: issuer "mst@redhat.com" # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full] # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full] # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: intel_iommu: Fix two misuse of "0x%u" prints virtio: skip guest index check on device load vhost-blk: set features before setting inflight feature pci: Disallow improper BAR registration for type 1 pci: Change error_report to assert(3) pci: advertise a page aligned ATS pc: Implement -no-hpet as sugar for -machine hpet=on vhost: Don't special case vq->used_phys in vhost_get_log_size() pci: Assert irqnum is between 0 and bus->nirqs in pci_bus_change_irq_level hw/pci: Extract pci_bus_change_irq_level() from pci_change_irq_level() hw/virtio/vhost-vdpa: Fix Coverity CID 1432864 acpi/crs: Support ranges > 32b for hosts acpi/crs: Prevent bad ranges for host bridges vhost-vsock: set vhostfd to non-blocking mode vhost-vdpa: negotiate VIRTIO_NET_F_STATUS with driver Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-31Merge remote-tracking branch 'remotes/mcayland/tags/qemu-sparc-20201028' ↵Peter Maydell
into staging qemu-sparc queue # gpg: Signature made Wed 28 Oct 2020 08:17:23 GMT # gpg: using RSA key CC621AB98E82200D915CC9C45BC2C56FAE0F321F # gpg: issuer "mark.cave-ayland@ilande.co.uk" # gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>" [full] # Primary key fingerprint: CC62 1AB9 8E82 200D 915C C9C4 5BC2 C56F AE0F 321F * remotes/mcayland/tags/qemu-sparc-20201028: hw/pci-host/sabre: Simplify code initializing variable once hw/pci-host/sabre: Remove superfluous address range check hw/pci-host/sabre: Update documentation link sabre: increase number of PCI bus IRQs from 32 to 64 hw/display/tcx: Allow 64-bit accesses to framebuffer stippler and blitter sabre: don't call sysbus_mmio_map() in sabre_realize() sparc32-ledma: don't reference nd_table directly within the device sparc32-espdma: use object_initialize_child() for esp child object sparc32-ledma: use object_initialize_child() for lance child object sparc32-dma: use object_initialize_child() for espdma and ledma child objects Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-30Merge remote-tracking branch ↵Peter Maydell
'remotes/vivier2/tags/trivial-branch-for-5.2-pull-request' into staging Pull request trivial branch 20201027 # gpg: Signature made Tue 27 Oct 2020 16:29:47 GMT # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier2/tags/trivial-branch-for-5.2-pull-request: CHANGELOG: remove disused file qdev: Fix two typos scripts/qmp: delete 'qmp' script cryptodev: Fix Lesser GPL version number io: Fix Lesser GPL version number cpus: Drop declaration of cpu_remove() Makefile: Add *.[ch].inc files to cscope/ctags/TAGS elf2dmp: Fix memory leak on main() error paths Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-30vhost-blk: set features before setting inflight featureJin Yu
Virtqueue has split and packed, so before setting inflight, you need to inform the back-end virtqueue format. Signed-off-by: Jin Yu <jin.yu@intel.com> Message-Id: <20200910134851.7817-1-jin.yu@intel.com> Acked-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-10-30pc: Implement -no-hpet as sugar for -machine hpet=onEduardo Habkost
Get rid of yet another global variable. The default will be hpet=on only if CONFIG_HPET=y. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20201021144716.1536388-1-ehabkost@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-10-29Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-5.2-20201028' ↵Peter Maydell
into staging ppc patch queue 2020-10-28 Here's the next pull request for ppc and spapr related patches, which should be the last things for soft freeze. Includes: * Numerous error handling cleanups from Greg Kurz * Cleanups to cpu realization and hotplug handling from Greg Kurz * A handful of other small fixes and cleanups This does include a change to pc_dimm_plug() that isn't in my normal areas of concern. That's there as a a prerequisite for ppc specific changes, and has an ack from Igor. # gpg: Signature made Tue 27 Oct 2020 14:13:21 GMT # gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392 # gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full] # gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full] # gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full] # gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown] # Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392 * remotes/dgibson/tags/ppc-for-5.2-20201028: ppc/: fix some comment spelling errors spapr: Improve spapr_reallocate_hpt() error reporting target/ppc: Fix kvmppc_load_htab_chunk() error reporting spapr: Use error_append_hint() in spapr_reallocate_hpt() spapr: Simplify error handling in spapr_memory_plug() spapr: Pass &error_abort when getting some PC DIMM properties spapr: Use appropriate getter for PC_DIMM_SLOT_PROP spapr: Use appropriate getter for PC_DIMM_ADDR_PROP pc-dimm: Drop @errp argument of pc_dimm_plug() spapr: Simplify spapr_cpu_core_realize() and spapr_cpu_core_unrealize() spapr: Make spapr_cpu_core_unrealize() idempotent spapr: Drop spapr_delete_vcpu() unused argument spapr: Unrealize vCPUs with qdev_unrealize() spapr: Fix leak of CPU machine specific data spapr: Move spapr_create_nvdimm_dr_connectors() to core machine code hw/net: move allocation to the heap due to very large stack frame ppc/spapr: re-assert IRQs during event-scan if there are pending spapr: Clarify why DR connectors aren't user creatable Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-29Merge remote-tracking branch ↵Peter Maydell
'remotes/pmaydell/tags/pull-target-arm-20201027-1' into staging target-arm queue: * raspi: add model of cprman clock manager * sbsa-ref: add an SBSA generic watchdog device * arm/trace: Fix hex printing * raspi: Add models of Pi 3 model A+, Pi Zero and Pi A+ * hw/arm/smmuv3: Set the restoration priority of the vSMMUv3 explicitly * Nuvoton NPCM7xx: Add USB, RNG, GPIO and watchdog support * hw/arm: fix min_cpus for xlnx-versal-virt platform * hw/arm/highbank: Silence warnings about missing fallthrough statements * linux-user: Support Aarch64 BTI * Armv7M systick: fix corner case bugs by rewriting to use ptimer # gpg: Signature made Tue 27 Oct 2020 11:27:10 GMT # gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE # gpg: issuer "peter.maydell@linaro.org" # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate] # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * remotes/pmaydell/tags/pull-target-arm-20201027-1: (48 commits) hw/timer/armv7m_systick: Rewrite to use ptimers hw/core/ptimer: Support ptimer being disabled by timer callback hw/arm/sbsa-ref: add SBSA watchdog device hw/watchdog: Implement SBSA watchdog device hw/arm/bcm2835_peripherals: connect the UART clock hw/char/pl011: add a clock input hw/misc/bcm2835_cprman: add sane reset values to the registers hw/misc/bcm2835_cprman: add the DSI0HSCK multiplexer hw/misc/bcm2835_cprman: implement clock mux behaviour hw/misc/bcm2835_cprman: add a clock mux skeleton implementation hw/misc/bcm2835_cprman: implement PLL channels behaviour hw/misc/bcm2835_cprman: add a PLL channel skeleton implementation hw/misc/bcm2835_cprman: implement PLLs behaviour hw/misc/bcm2835_cprman: add a PLL skeleton implementation hw/arm/raspi: add a skeleton implementation of the CPRMAN hw/arm/raspi: fix CPRMAN base address hw/core/clock: trace clock values in Hz instead of ns hw/core/clock: provide the VMSTATE_ARRAY_CLOCK macro arm/trace: Fix hex printing hw/arm/raspi: Add the Raspberry Pi 3 model A+ ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-28sparc32-espdma: use object_initialize_child() for esp child objectMark Cave-Ayland
Store the child object directly within the sparc32-espdma object rather than using link properties. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20200926140216.7368-4-mark.cave-ayland@ilande.co.uk> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2020-10-28sparc32-ledma: use object_initialize_child() for lance child objectMark Cave-Ayland
Store the child object directly within the sparc32-ledma object rather than using link properties. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20200926140216.7368-3-mark.cave-ayland@ilande.co.uk> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2020-10-28sparc32-dma: use object_initialize_child() for espdma and ledma child objectsMark Cave-Ayland
Store the child objects directly within the sparc32-dma object rather than using link properties. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20200926140216.7368-2-mark.cave-ayland@ilande.co.uk> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2020-10-27Merge remote-tracking branch 'remotes/philmd-gitlab/tags/led-api-20201026' ↵Peter Maydell
into staging API to model LED. CI jobs results: . https://cirrus-ci.com/build/4879251751043072 . https://gitlab.com/philmd/qemu/-/pipelines/207661784 . https://travis-ci.org/github/philmd/qemu/builds/738958191 . https://app.shippable.com/github/philmd/qemu/runs/891/summary/console # gpg: Signature made Mon 26 Oct 2020 22:03:59 GMT # gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE # gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full] # Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE * remotes/philmd-gitlab/tags/led-api-20201026: hw/arm/tosa: Replace fprintf() calls by LED devices hw/misc/mps2-scc: Use the LED device hw/misc/mps2-fpgaio: Use the LED device hw/arm/aspeed: Add the 3 front LEDs drived by the PCA9552 #1 hw/misc/led: Emit a trace event when LED intensity has changed hw/misc/led: Allow connecting from GPIO output hw/misc/led: Add a LED device Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-27qdev: Fix two typosMaxim Levitsky
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20201019163702.471239-2-mlevitsk@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-10-27cpus: Drop declaration of cpu_remove()Greg Kurz
cpu_remove() got superseded by cpu_remove_sync() in commit dbadee4ff4a0, but its prototype wasn't removed. We could possibly keep the shorter cpu_remove() naming but it seems better to highligth that this blocks until the CPU thread is joined. Fixes: dbadee4ff4a0 ("cpus: join thread when removing a vCPU") Cc: pbonzini@redhat.com Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <160268285707.1107461.15035929822602623985.stgit@bahia.lan> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-10-28spapr: Improve spapr_reallocate_hpt() error reportingGreg Kurz
spapr_reallocate_hpt() has three users, two of which pass &error_fatal and the third one, htab_load(), passes &local_err, uses it to detect failures and simply propagates -EINVAL up to vmstate_load(), which will cause QEMU to exit. It is thus confusing that spapr_reallocate_hpt() doesn't return right away when an error is detected in some cases. Also, the comment suggesting that the caller is welcome to try to carry on seems like a remnant in this respect. This can be improved: - change spapr_reallocate_hpt() to always report a negative errno on failure, either as reported by KVM or -ENOSPC if the HPT is smaller than what was asked, - use that to detect failures in htab_load() which is preferred over checking &local_err, - propagate this negative errno to vmstate_load() because it is more accurate than propagating -EINVAL for all possible errors. [dwg: Fix compile error due to omitted prelim patch] Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <160371605460.305923.5890143959901241157.stgit@bahia.lan> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-10-28spapr: Simplify error handling in spapr_memory_plug()Greg Kurz
As recommended in "qapi/error.h", add a bool return value to spapr_add_lmbs() and spapr_add_nvdimm(), and use them instead of local_err in spapr_memory_plug(). This allows to get rid of the error propagation overhead. Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <160309734178.2739814.3488437759887793902.stgit@bahia.lan> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-10-28pc-dimm: Drop @errp argument of pc_dimm_plug()Greg Kurz
pc_dimm_plug() doesn't use it. It only aborts on error. Drop @errp and adapt the callers accordingly. [dwg: Removed unused label to fix compile] Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <160309728447.2739814.12831204841251148202.stgit@bahia.lan> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-10-28spapr: Move spapr_create_nvdimm_dr_connectors() to core machine codeGreg Kurz
The spapr_create_nvdimm_dr_connectors() function doesn't need to access any internal details of the sPAPR NVDIMM implementation. Also, pretty much like for the LMBs, only spapr_machine_init() is responsible for the creation of DR connectors for NVDIMMs. Make this clear by making this function static in hw/ppc/spapr.c. Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <160249772183.757627.7396780936543977766.stgit@bahia.lan> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-10-27hw/timer/armv7m_systick: Rewrite to use ptimersPeter Maydell
The armv7m systick timer is a 24-bit decrementing, wrap-on-zero, clear-on-write counter. Our current implementation has various bugs and dubious workarounds in it (for instance see https://bugs.launchpad.net/qemu/+bug/1872237). We have an implementation of a simple decrementing counter and we put a lot of effort into making sure it handles the interesting corner cases (like "spend a cycle at 0 before reloading") -- ptimer. Rewrite the systick timer to use a ptimer rather than a raw QEMU timer. Unfortunately this is a migration compatibility break, which will affect all M-profile boards. Among other bugs, this fixes https://bugs.launchpad.net/qemu/+bug/1872237 : now writes to SYST_CVR when the timer is enabled correctly do nothing; when the timer is enabled via SYST_CSR.ENABLE, the ptimer code will (because of POLICY_NO_IMMEDIATE_RELOAD) arrange that after one timer tick the counter is reloaded from SYST_RVR and then counts down from there, as the architecture requires. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20201015151829.14656-3-peter.maydell@linaro.org
2020-10-27hw/watchdog: Implement SBSA watchdog deviceShashi Mallela
Generic watchdog device model implementation as per ARM SBSA v6.0 Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org> Message-id: 20201027015927.29495-2-shashi.mallela@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-27hw/char/pl011: add a clock inputLuc Michel
Add a clock input to the PL011 UART so we can compute the current baud rate and trace it. This is intended for developers who wish to use QEMU to e.g. debug their firmware or to figure out the baud rate configured by an unknown/closed source binary. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Luc Michel <luc@lmichel.fr> Tested-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-27hw/misc/bcm2835_cprman: add sane reset values to the registersLuc Michel
Those reset values have been extracted from a Raspberry Pi 3 model B v1.2, using the 2020-08-20 version of raspios. The dump was done using the debugfs interface of the CPRMAN driver in Linux (under '/sys/kernel/debug/clk'). Each exposed clock tree stage (PLLs, channels and muxes) can be observed by reading the 'regdump' file (e.g. 'plla/regdump'). Those values are set by the Raspberry Pi firmware at boot time (Linux expects them to be set when it boots up). Some stages are not exposed by the Linux driver (e.g. the PLL B). For those, the reset values are unknown and left to 0 which implies a disabled output. Once booted in QEMU, the final clock tree is very similar to the one visible on real hardware. The differences come from some unimplemented devices for which the driver simply disable the corresponding clock. Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Luc Michel <luc@lmichel.fr> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-27hw/misc/bcm2835_cprman: add the DSI0HSCK multiplexerLuc Michel
This simple mux sits between the PLL channels and the DSI0E and DSI0P clock muxes. This mux selects between PLLA-DSI0 and PLLD-DSI0 channel and outputs the selected signal to source number 4 of DSI0E/P clock muxes. It is controlled by the cm_dsi0hsck register. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Luc Michel <luc@lmichel.fr> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-27hw/misc/bcm2835_cprman: add a clock mux skeleton implementationLuc Michel
The clock multiplexers are the last clock stage in the CPRMAN. Each mux outputs one clock signal that goes out of the CPRMAN to the SoC peripherals. Each mux has at most 10 sources. The sources 0 to 3 are common to all muxes. They are: 0. ground (no clock signal) 1. the main oscillator (xosc) 2. "test debug 0" clock 3. "test debug 1" clock Test debug 0 and 1 are actual clock muxes that can be used as sources to other muxes (for debug purpose). Sources 4 to 9 are mux specific and can be unpopulated (grounded). Those sources are fed by the PLL channels outputs. One corner case exists for DSI0E and DSI0P muxes. They have their source number 4 connected to an intermediate multiplexer that can select between PLLA-DSI0 and PLLD-DSI0 channel. This multiplexer is called DSI0HSCK and is not a clock mux as such. It is really a simple mux from the hardware point of view (see https://elinux.org/The_Undocumented_Pi). This mux is not implemented in this commit. Note that there is some muxes for which sources are unknown (because of a lack of documentation). For those cases all the sources are connected to ground in this implementation. Each clock mux output is exported by the CPRMAN at the qdev level, adding the suffix '-out' to the mux name to form the output clock name. (E.g. the 'uart' mux sees its output exported as 'uart-out' at the CPRMAN level.) Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Luc Michel <luc@lmichel.fr> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-27hw/misc/bcm2835_cprman: add a PLL channel skeleton implementationLuc Michel
PLLs are composed of multiple channels. Each channel outputs one clock signal. They are modeled as one device taking the PLL generated clock as input, and outputting a new clock. A channel shares the CM register with its parent PLL, and has its own A2W_CTRL register. A write to the CM register will trigger an update of the PLL and all its channels, while a write to an A2W_CTRL channel register will update the required channel only. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Luc Michel <luc@lmichel.fr> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-27hw/misc/bcm2835_cprman: implement PLLs behaviourLuc Michel
The CPRMAN PLLs generate a clock based on a prescaler, a multiplier and a divider. The prescaler doubles the parent (xosc) frequency, then the multiplier/divider are applied. The multiplier has an integer and a fractional part. This commit also implements the CPRMAN CM_LOCK register. This register reports which PLL is currently locked. We consider a PLL has being locked as soon as it is enabled (on real hardware, there is a delay after turning a PLL on, for it to stabilize). Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Luc Michel <luc@lmichel.fr> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-27hw/misc/bcm2835_cprman: add a PLL skeleton implementationLuc Michel
There are 5 PLLs in the CPRMAN, namely PLL A, C, D, H and B. All of them take the xosc clock as input and produce a new clock. This commit adds a skeleton implementation for the PLLs as sub-devices of the CPRMAN. The PLLs are instantiated and connected internally to the main oscillator. Each PLL has 6 registers : CM, A2W_CTRL, A2W_ANA[0,1,2,3], A2W_FRAC. A write to any of them triggers a call to the (not yet implemented) pll_update function. If the main oscillator changes frequency, an update is also triggered. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Luc Michel <luc@lmichel.fr> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-27hw/arm/raspi: add a skeleton implementation of the CPRMANLuc Michel
The BCM2835 CPRMAN is the clock manager of the SoC. It is composed of a main oscillator, and several sub-components (PLLs, multiplexers, ...) to generate the BCM2835 clock tree. This commit adds a skeleton of the CPRMAN, with a dummy register read/write implementation. It embeds the main oscillator (xosc) from which all the clocks will be derived. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Luc Michel <luc@lmichel.fr> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-27hw/arm/raspi: fix CPRMAN base addressLuc Michel
The CPRMAN (clock controller) was mapped at the watchdog/power manager address. It was also split into two unimplemented peripherals (CM and A2W) but this is really the same one, as shown by this extract of the Raspberry Pi 3 Linux device tree: watchdog@7e100000 { compatible = "brcm,bcm2835-pm\0brcm,bcm2835-pm-wdt"; [...] reg = <0x7e100000 0x114 0x7e00a000 0x24>; [...] }; [...] cprman@7e101000 { compatible = "brcm,bcm2835-cprman"; [...] reg = <0x7e101000 0x2000>; [...] }; Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Luc Michel <luc@lmichel.fr> Tested-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-27hw/core/clock: provide the VMSTATE_ARRAY_CLOCK macroLuc Michel
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Damien Hedde <damien.hedde@greensocs.com> Signed-off-by: Luc Michel <luc@lmichel.fr> Tested-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-27hw/arm/bcm2836: Introduce the BCM2835 SoCPhilippe Mathieu-Daudé
Reviewed-by: Luc Michel <luc.michel@greensocs.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20201024170127.3592182-7-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-27hw/arm/bcm2836: Restrict BCM283XInfo declaration to C sourcePhilippe Mathieu-Daudé
No code out of bcm2836.c uses (or requires) the BCM283XInfo declarations. Move it locally to the C source file. Reviewed-by: Luc Michel <luc.michel@greensocs.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20201024170127.3592182-2-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-27hw/gpio: Add GPIO model for Nuvoton NPCM7xxHavard Skinnemoen
The NPCM7xx chips have multiple GPIO controllers that are mostly identical except for some minor differences like the reset values of some registers. Each controller controls up to 32 pins. Each individual pin is modeled as a pair of unnamed GPIOs -- one for emitting the actual pin state, and one for driving the pin externally. Like the nRF51 GPIO controller, a gpio level may be negative, which means the pin is not driven, or floating. Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-27hw/arm/npcm7xx: Add EHCI and OHCI controllersHavard Skinnemoen
The NPCM730 and NPCM750 chips have a single USB host port shared between a USB 2.0 EHCI host controller and a USB 1.1 OHCI host controller. This adds support for both of them. Testing notes: * With -device usb-kbd, qemu will automatically insert a full-speed hub, and the keyboard becomes controlled by the OHCI controller. * With -device usb-kbd,bus=usb-bus.0,port=1, the keyboard is directly attached to the port without any hubs, and the device becomes controlled by the EHCI controller since it's high speed capable. * With -device usb-kbd,bus=usb-bus.0,port=1,usb_version=1, the keyboard is directly attached to the port, but it only advertises itself as full-speed capable, so it becomes controlled by the OHCI controller. In all cases, the keyboard device enumerates correctly. Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-27hw/misc: Add npcm7xx random number generatorHavard Skinnemoen
The RNG module returns a byte of randomness when the Data Valid bit is set. This implementation ignores the prescaler setting, and loads a new value into RNGD every time RNGCS is read while the RNG is enabled and random data is available. A qtest featuring some simple randomness tests is included. Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-27hw/timer: Adding watchdog for NPCM7XX Timer.Hao Wu
The watchdog is part of NPCM7XX's timer module. Its behavior is controlled by the WTCR register in the timer. When enabled, the watchdog issues an interrupt signal after a pre-set amount of cycles, and issues a reset signal shortly after that. Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: deleted blank line at end of npcm_watchdog_timer-test.c] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-27pci: allocate pci id for nvmeKlaus Jensen
The emulated nvme device (hw/block/nvme.c) is currently using an internal Intel device id. Prepare to change that by allocating a device id under the 1b36 (Red Hat, Inc.) vendor id. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Keith Busch <kbusch@kernel.org>
2020-10-27pci: pass along the return value of dma_memory_rwKlaus Jensen
Some devices might want to know the return value of dma_memory_rw, so pass it along instead of ignoring it. There are no existing users of the return value, so this patch should be safe. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Keith Busch <kbusch@kernel.org>
2020-10-26Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into ↵Peter Maydell
staging * fix --disable-tcg builds (Claudio) * Fixes for macOS --enable-modules build and OpenBSD curses/iconv detection (myself) * Start preparing for meson 0.56 (myself) * Move directory configuration to meson (myself) * Start untangling qemu_init (myself) * Windows fixes (Sunil) * Remove -no-kbm (Thomas) # gpg: Signature made Mon 26 Oct 2020 11:12:17 GMT # gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83 # gpg: issuer "pbonzini@redhat.com" # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini-gitlab/tags/for-upstream: machine: move SMP initialization from vl.c machine: move UP defaults to class_base_init machine: remove deprecated -machine enforce-config-section option win32: boot broken when bind & data dir are the same WHPX: Fix WHPX build break configure: move install_blobs from configure to meson configure: remove unused variable from config-host.mak configure: move directory options from config-host.mak to meson configure: allow configuring localedir Makefile: separate meson rerun from the rest of the ninja invocation Remove deprecated -no-kvm option replay: do not build if TCG is not available qtest: unbreak non-TCG builds in bios-tables-test hw/core/qdev-clock: add a reference on aliased clocks do not use colons in test names meson: rewrite curses/iconv test build: fix macOS --enable-modules build Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-26hw/misc/mps2-scc: Use the LED devicePhilippe Mathieu-Daudé
Per the 'ARM MPS2 and MPS2+ FPGA Prototyping Boards Technical Reference Manual' (100112_0200_07_en): 2.1 Overview of the MPS2 and MPS2+ hardware The MPS2 and MPS2+ FPGA Prototyping Boards contain the following components and interfaces: * User switches and user LEDs: - Two green LEDs and two push buttons that connect to the FPGA. - Eight green LEDs and one 8-way dip switch that connect to the MCC. Add the 8 LEDs connected to the MCC. This replaces the 'mps2_scc_leds' trace events by the generic 'led_set_intensity' event. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Message-Id: <20200912134041.946260-7-f4bug@amsat.org>
2020-10-26hw/misc/mps2-fpgaio: Use the LED devicePhilippe Mathieu-Daudé
Per the 'ARM MPS2 and MPS2+ FPGA Prototyping Boards Technical Reference Manual' (100112_0200_07_en): 2.1 Overview of the MPS2 and MPS2+ hardware The MPS2 and MPS2+ FPGA Prototyping Boards contain the following components and interfaces: * User switches and user LEDs: - Two green LEDs and two push buttons that connect to the FPGA. - Eight green LEDs and one 8-way dip switch that connect to the MCC. Add the 2 LEDs connected to the FPGA. This replaces the 'mps2_fpgaio_leds' trace events by the generic 'led_set_intensity' event. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Message-Id: <20200912134041.946260-6-f4bug@amsat.org>
2020-10-26hw/misc/led: Allow connecting from GPIO outputPhilippe Mathieu-Daudé
Some devices expose GPIO lines. Add a GPIO qdev input to our LED device, so we can connect a GPIO output using qdev_connect_gpio_out(). When used with GPIOs, the intensity can only be either minium or maximum. This depends of the polarity of the GPIO (which can be inverted). Declare the GpioPolarity type to model the polarity. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Message-Id: <20200912134041.946260-3-f4bug@amsat.org>
2020-10-26hw/misc/led: Add a LED devicePhilippe Mathieu-Daudé
Add a LED device which can be connected to a GPIO output. They can also be dimmed with PWM devices. For now we do not implement the dimmed mode, but in preparation of a future implementation, we start using the LED intensity. LEDs are limited to a fixed set of colors. Reviewed-by: Luc Michel <luc.michel@greensocs.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20200912134041.946260-2-f4bug@amsat.org>
2020-10-26machine: remove deprecated -machine enforce-config-section optionPaolo Bonzini
Deprecated since 3.1 and complicates the initialization sequence, remove it. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-22hw/misc/sifive_u_otp: Add backend drive supportGreen Wan
Add '-drive' support to OTP device. Allow users to assign a raw file as OTP image. test commands for 16k otp.img filled with zero: $ dd if=/dev/zero of=./otp.img bs=1k count=16 $ ./qemu-system-riscv64 -M sifive_u -m 256M -nographic -bios none \ -kernel ../opensbi/build/platform/sifive/fu540/firmware/fw_payload.elf \ -d guest_errors -drive if=none,format=raw,file=otp.img Signed-off-by: Green Wan <green.wan@sifive.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Tested-by: Bin Meng <bin.meng@windriver.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20201020033732.12921-3-green.wan@sifive.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-10-22hw/misc/sifive_u_otp: Add write function and write-once protectionGreen Wan
- Add write operation to update fuse data bit when PWE bit is on. - Add array, fuse_wo, to store the 'written' status for all bits of OTP to block the write operation. Signed-off-by: Green Wan <green.wan@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Tested-by: Bin Meng <bin.meng@windriver.com> Message-id: 20201020033732.12921-2-green.wan@sifive.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-10-22hw/riscv: Load the kernel after the firmwareAlistair Francis
Instead of loading the kernel at a hardcoded start address, let's load the kernel at the next aligned address after the end of the firmware. This should have no impact for current users of OpenSBI, but will allow loading a noMMU kernel at the start of memory. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Tested-by: Bin Meng <bin.meng@windriver.com> Message-id: 46c00c4f15b42feb792090e3d74359e180a6d954.1602634524.git.alistair.francis@wdc.com
2020-10-22hw/riscv: Add a riscv_is_32_bit() functionAlistair Francis
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Tested-by: Bin Meng <bin.meng@windriver.com> Message-id: 4c6a85dfb6dd470aa79356ebc1b02f479c2758e0.1602634524.git.alistair.francis@wdc.com
2020-10-22hw/riscv: Return the end address of the loaded firmwareAlistair Francis
Instead of returning the unused entry address from riscv_load_firmware() instead return the end address. Also return the end address from riscv_find_and_load_firmware(). This tells the caller if a firmware was loaded and how big it is. This can be used to determine the load address of the next image (usually the kernel). Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Tested-by: Bin Meng <bin.meng@windriver.com> Message-id: 558cf67162342d65a23262248b040563716628b2.1602634524.git.alistair.francis@wdc.com
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-16 12:50:11 +0000