| Age | Commit message (Collapse) | Author |
|---|
|
Switch the mss-timer code away from bottom-half based ptimers to
the new transaction-based ptimer API. This just requires adding
begin/commit calls around the various places that modify the ptimer
state, and using the new ptimer_init() function to create the timer.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20191008171740.9679-20-peter.maydell@linaro.org
|
|
Provide the new transaction-based API. If a ptimer is created
using ptimer_init() rather than ptimer_init_with_bh(), then
instead of providing a QEMUBH, it provides a pointer to the
callback function directly, and has opted into the transaction
API. All calls to functions which modify ptimer state:
- ptimer_set_period()
- ptimer_set_freq()
- ptimer_set_limit()
- ptimer_set_count()
- ptimer_run()
- ptimer_stop()
must be between matched calls to ptimer_transaction_begin()
and ptimer_transaction_commit(). When ptimer_transaction_commit()
is called it will evaluate the state of the timer after all the
changes in the transaction, and call the callback if necessary.
In the old API the individual update functions generally would
call ptimer_trigger() immediately, which would schedule the QEMUBH.
In the new API the update functions will instead defer the
"set s->next_event and call ptimer_reload()" work to
ptimer_transaction_commit().
Because ptimer_trigger() can now immediately call into the
device code which may then call other ptimer functions that
update ptimer_state fields, we must be more careful in
ptimer_reload() not to cache fields from ptimer_state across
the ptimer_trigger() call. (This was harmless with the QEMUBH
mechanism as the BH would not be invoked until much later.)
We use assertions to check that:
* the functions modifying ptimer state are not called outside
a transaction block
* ptimer_transaction_begin() and _commit() calls are paired
* the transaction API is not used with a QEMUBH ptimer
There is some slight repetition of code:
* most of the set functions have similar looking "if s->bh
call ptimer_reload, otherwise set s->need_reload" code
* ptimer_init() and ptimer_init_with_bh() have similar code
We deliberately don't try to avoid this repetition, because
it will all be deleted when the QEMUBH version of the API
is removed.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20191008171740.9679-3-peter.maydell@linaro.org
|
|
Currently the ptimer design uses a QEMU bottom-half as its
mechanism for calling back into the device model using the
ptimer when the timer has expired. Unfortunately this design
is fatally flawed, because it means that there is a lag
between the ptimer updating its own state and the device
callback function updating device state, and guest accesses
to device registers between the two can return inconsistent
device state.
We want to replace the bottom-half design with one where
the guest device's callback is called either immediately
(when the ptimer triggers by timeout) or when the device
model code closes a transaction-begin/end section (when the
ptimer triggers because the device model changed the
ptimer's count value or other state). As the first step,
rename ptimer_init() to ptimer_init_with_bh(), to free up
the ptimer_init() name for the new API. We can then convert
all the ptimer users away from ptimer_init_with_bh() before
removing it entirely.
(Commit created with
git grep -l ptimer_init | xargs sed -i -e 's/ptimer_init/ptimer_init_with_bh/'
and three overlong lines folded by hand.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20191008171740.9679-2-peter.maydell@linaro.org
|
|
into staging
ppc patch queue 2019-10-04
Here's the next batch of ppc and spapr patches. Includes:
* Fist part of a large cleanup to irq infrastructure
* Recreate the full FDT at CAS time, instead of making a difficult
to follow set of updates. This will help us move towards
eliminating CAS reboots altogether
* No longer provide RTAS blob to SLOF - SLOF can include it just as
well itself, since guests will generally need to relocate it with
a call to instantiate-rtas
* A number of DFP fixes and cleanups from Mark Cave-Ayland
* Assorted bugfixes
* Several new small devices for powernv
# gpg: Signature made Fri 04 Oct 2019 10:35:57 BST
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-4.2-20191004: (53 commits)
ppc/pnv: Remove the XICSFabric Interface from the POWER9 machine
spapr: Eliminate SpaprIrq::init hook
spapr: Add return value to spapr_irq_check()
spapr: Use less cryptic representation of which irq backends are supported
xive: Improve irq claim/free path
spapr, xics, xive: Better use of assert()s on irq claim/free paths
spapr: Handle freeing of multiple irqs in frontend only
spapr: Remove unhelpful tracepoints from spapr_irq_free_xics()
spapr: Eliminate SpaprIrq:get_nodename method
spapr: Simplify spapr_qirq() handling
spapr: Fix indexing of XICS irqs
spapr: Eliminate nr_irqs parameter to SpaprIrq::init
spapr: Clarify and fix handling of nr_irqs
spapr: Replace spapr_vio_qirq() helper with spapr_vio_irq_pulse() helper
spapr: Fold spapr_phb_lsi_qirq() into its single caller
xics: Create sPAPR specific ICS subtype
xics: Merge TYPE_ICS_BASE and TYPE_ICS_SIMPLE classes
xics: Eliminate reset hook
xics: Rename misleading ics_simple_*() functions
xics: Eliminate 'reject', 'resend' and 'eoi' class hooks
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
The virtio-fs virtio device provides shared file system access using
the FUSE protocol carried over virtio.
The actual file server is implemented in an external vhost-user-fs device
backend process.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190930105135.27244-3-dgilbert@redhat.com>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
For machines 4.2 or higher with ACPI boot use GED for system_powerdown
event instead of GPIO. Guest boot with DT still uses GPIO.
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20190918130633.4872-9-shameerali.kolothum.thodi@huawei.com>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
This is in preparation of using GED device for
system_powerdown event. Make the powerdown notifier
registration independent of create_gpio() fn.
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20190918130633.4872-8-shameerali.kolothum.thodi@huawei.com>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
This initializes the GED device with base memory and irq, configures
ged memory hotplug event and builds the corresponding aml code. With
this, both hot and cold plug of device memory is enabled now for Guest
with ACPI boot. Memory cold plug support with Guest DT boot is not yet
supported.
As DSDT table gets changed by this, update bios-tables-test-allowed-diff.h
to avoid "make check" failure.
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Message-Id: <20190918130633.4872-6-shameerali.kolothum.thodi@huawei.com>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
|
|
The ACPI Generic Event Device (GED) is a hardware-reduced specific
device[ACPI v6.1 Section 5.6.9] that handles all platform events,
including the hotplug ones. This patch generates the AML code that
defines GEDs.
Platforms need to specify their own GED Event bitmap to describe
what kind of events they want to support through GED. Also this
uses a a single interrupt for the GED device, relying on IO
memory region to communicate the type of device affected by the
interrupt. This way, we can support up to 32 events with a unique
interrupt.
This supports only memory hotplug for now.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20190918130633.4872-4-shameerali.kolothum.thodi@huawei.com>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
|
|
This is in preparation for adding support for ARM64 platforms
where it doesn't use port mapped IO for ACPI IO space. We are
making changes so that MMIO region can be accommodated
and board can pass the base address into the aml build function.
Also move few MEMORY_* definitions to header so that other memory
hotplug event signalling mechanisms (eg. Generic Event Device on
HW-reduced acpi platforms) can use the same from their respective
event handler code.
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20190918130633.4872-2-shameerali.kolothum.thodi@huawei.com>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The container error integer field is currently used to store
the first error potentially encountered during any
vfio_listener_region_add() call. However this fails to propagate
detailed error messages up to the vfio_connect_container caller.
Instead of using an integer, let's use an Error handle.
Messages are slightly reworded to accomodate the propagation.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This method is used to set up the interrupt backends for the current
configuration. However, this means some confusing redirection between
the "dual" mode init and the init hooks for xics only and xive only modes.
Since we now have simple flags indicating whether XICS and/or XIVE are
supported, it's easier to just open code each initialization directly in
spapr_irq_init(). This will also make some future cleanups simpler.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
|
|
SpaprIrq::ov5 stores the value for a particular byte in PAPR option vector
5 which indicates whether XICS, XIVE or both interrupt controllers are
available. As usual for PAPR, the encoding is kind of overly complicated
and confusing (though to be fair there are some backwards compat things it
has to handle).
But to make our internal code clearer, have SpaprIrq encode more directly
which backends are available as two booleans, and derive the OV5 value from
that at the point we need it.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
|
|
spapr_xive_irq_claim() returns a bool to indicate if it succeeded.
But most of the callers and one callee use int return values and/or an
Error * with more information instead. In any case, ints are a more
common idiom for success/failure states than bools (one never knows
what sense they'll be in).
So instead change to an int return value to indicate presence of error
+ an Error * to describe the details through that call chain.
It also didn't actually check if the irq was already claimed, which is
one of the primary purposes of the claim path, so do that.
spapr_xive_irq_free() also returned a bool... which no callers checked
and was always true, so just drop it.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
|
|
spapr_irq_free() can be used to free multiple irqs at once. That's useful
for its callers, but there's no need to make the individual backend hooks
handle this. We can loop across the irqs in spapr_irq_free() itself and
have the hooks just do one at time.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
|
|
This method is used to determine the name of the irq backend's node in the
device tree, so that we can find its phandle (after SLOF may have modified
it from the phandle we initially gave it).
But, in the two cases the only difference between the node name is the
presence of a unit address. Searching for a node name without considering
unit address is standard practice for the device tree, and
fdt_subnode_offset() will do exactly that, making this method unecessary.
While we're there, remove the XICS_NODENAME define. The name
"interrupt-controller" is required by PAPR (and IEEE1275), and a bunch of
places assume it already.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
|
|
Currently spapr_qirq(), whic is used to find the qemu_irq for an spapr
global irq number, redirects through the SpaprIrq::qirq method. But
the array of qemu_irqs is allocated in the PAPR layer, not the
backends, and so the method implementations all return the same thing,
just differing in the preliminary checks they make.
So, we can remove the method, and just implement spapr_qirq() directly,
including all the relevant checks in one place. We change all those
checks into assert()s as well, since a failure here indicates an error in
the calling code.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
|
|
The only reason this parameter was needed was to work around the
inconsistent meaning of nr_irqs between xics and xive. Now that we've
fixed that, we can consistently use the number directly in the SpaprIrq
configuration.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
|
|
Both the XICS and XIVE interrupt backends have a "nr-irqs" property, but
it means slightly different things. For XICS (or, strictly, the ICS) it
indicates the number of "real" external IRQs. Those start at XICS_IRQ_BASE
(0x1000) and don't include the special IPI vector. For XIVE, however, it
includes the whole IRQ space, including XIVE's many IPI vectors.
The spapr code currently doesn't handle this sensibly, with the
nr_irqs value in SpaprIrq having different meanings depending on the
backend. We fix this by renaming nr_irqs to nr_xirqs and making it
always indicate just the number of external irqs, adjusting the value
we pass to XIVE accordingly. We also move to using common constants
in most of the irq configurations, to make it clearer that the IRQ
space looks the same to the guest (and emulated devices), even if the
backend is different.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
|
|
Every caller of spapr_vio_qirq() immediately calls qemu_irq_pulse() with
the result, so we might as well just fold that into the helper.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
|
|
No point having a two-line helper that's used exactly once, and not likely
to be used anywhere else in future.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
|
|
We create a subtype of TYPE_ICS specifically for sPAPR. For now all this
does is move the setup of the PAPR specific hcalls and RTAS calls to
the realize() function for this, rather than requiring the PAPR code to
explicitly call xics_spapr_init(). In future it will have some more
function.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
|
|
TYPE_ICS_SIMPLE is the only subtype of TYPE_ICS_BASE that's ever
instantiated. The existence of different classes is mostly a hang
over from when we (misguidedly) had separate subtypes for the KVM and
non-KVM version of the device.
There could be some call for an abstract base type for ICS variants
that use a different representation of their state (PowerNV PHB3 might
want this). The current split isn't really in the right place for
that though. If we need this in future, we can re-implement it more
in line with what we actually need.
So, collapse the two classes together into just TYPE_ICS.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
|
|
Currently TYPE_XICS_BASE and TYPE_XICS_SIMPLE have their own reset methods,
using the standard technique for having the subtype call the supertype's
methods before doing its own thing.
But TYPE_XICS_SIMPLE is the only subtype of TYPE_XICS_BASE ever
instantiated, so there's no point having the split here. Merge them
together into just an ics_reset() function.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
|
|
There are a number of ics_simple_*() functions that aren't actually
specific to TYPE_XICS_SIMPLE at all, and are equally valid on
TYPE_XICS_BASE. Rename them to ics_*() accordingly.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
|
|
Currently ics_reject(), ics_resend() and ics_eoi() indirect through
class methods. But there's only one implementation of each method,
the one in TYPE_ICS_SIMPLE. TYPE_ICS_BASE has no implementation, but
it's never instantiated, and has no other subtypes.
So clean up by eliminating the method and just having ics_reject(),
ics_resend() and ics_eoi() contain the logic directly.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
|
|
Interface instances should never be directly dereferenced. So, the common
practice is to make them incomplete types to make sure no-one does that.
XICSFrabric, however, had a dummy type which is less safe.
We were also using OBJECT_CHECK() where we should have been using
INTERFACE_CHECK().
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
|
|
SLOF implements one itself so let's remove it from QEMU. It is one less
image and simpler setup as the RTAS blob never stays in its initial place
anyway as the guest OS always decides where to put it.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
Certain old guest versions don't understand the radix MMU introduced with
POWER ISA 3.0, but incorrectly select it if presented with the option at
CAS time. We workaround this in qemu by explicitly excluding the radix
(and other ISA 3.0 linked) options if the guest doesn't explicitly note
support for ISA 3.0.
This is handled by the 'cas_legacy_guest_workaround' flag, which is pretty
vague. Rename it to 'cas_pre_isa3_guest' to be clearer about what it's for.
In addition, we unnecessarily call spapr_populate_pa_features() with
different options when initially constructing the device tree and when
adjusting it at CAS time. At the initial construct time cas_pre_isa3_guest
is already false, so we can still use the flag, rather than explicitly
overriding it to be false at the callsite.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
|
|
It will help us to discard interrupt numbers which have not been
claimed in the next patch.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20190911133937.2716-2-clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
add PnvHomer device model to emulate homer memory access
for pstate table, occ-sensors, slw, occ static and dynamic
values for Power8 and Power9 chips.
Signed-off-by: Balamuruhan S <bala24@linux.ibm.com>
Message-Id: <20190912093056.4516-4-bala24@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
emulate occ common area region with occ sram device model which
occ and skiboot uses it to communicate regarding sensors, slw
and HWMON in PowerNV emulated host.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Balamuruhan S <bala24@linux.ibm.com>
Message-Id: <20190912093056.4516-3-bala24@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
During PowerNV boot skiboot populates the device tree by
retrieving base address of homer/occ common area from
PBA BARs and prd ipoll mask by accessing xscom read/write
accesses.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Balamuruhan S <bala24@linux.ibm.com>
Message-Id: <20190912093056.4516-2-bala24@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
With the merge of notdirty handling into store_helper,
the last user of cpu->mem_io_vaddr was removed.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Cleaning up offline XenDevice objects directly in
xen_device_backend_changed() is dangerous as xen_device_unrealize() will
modify the watch list that is being walked. Even the QLIST_FOREACH_SAFE()
used in notifier_list_notify() is insufficient as *two* notifiers (for
the frontend and backend watches) are removed, thus potentially rendering
the 'next' pointer unsafe.
The solution is to use the XenBus backend_watch handler to do the clean-up
instead, as it is invoked whilst walking a separate watch list.
This patch therefore adds a new 'inactive_devices' list to XenBus, to which
offline devices are added by xen_device_backend_changed(). The XenBus
backend_watch registration is also changed to not only invoke
xen_bus_enumerate() but also a new xen_bus_cleanup() function, which will
walk 'inactive_devices' and perform the necessary actions.
For safety an extra 'online' check is also added to xen_bus_type_enumerate()
to make sure that no attempt is made to create a new XenDevice object for a
backend that is offline.
NOTE: This patch also includes some cosmetic changes:
- substitute the local variable name 'backend_state'
in xen_bus_type_enumerate() with 'state', since there
is no ambiguity with any other state in that context.
- change xen_device_state_is_active() to
xen_device_frontend_is_active() (and pass a XenDevice directly)
since the state tests contained therein only apply to a frontend.
- use 'state' rather then 'xendev->backend_state' in
xen_device_backend_changed() to shorten the code.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <20190913082159.31338-4-paul.durrant@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
|
|
This patch uses the XenWatchList abstraction to add a separate watch list
for each device. This is more scalable than walking a single notifier
list for all watches and is also necessary to implement a bug-fix in a
subsequent patch.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Anthony Perard <anthony.perard@citrix.com>
Message-Id: <20190913082159.31338-3-paul.durrant@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
|
|
Xenstore watch call-backs are already abstracted away from XenBus using
the XenWatch data structure but the associated NotifierList manipulation
and file handle registration is still open coded in various xen_bus_...()
functions.
This patch creates a new XenWatchList data structure to allow these
interactions to be abstracted away from XenBus as well. This is in
preparation for a subsequent patch which will introduce separate watch lists
for XenBus and XenDevice objects.
NOTE: This patch also introduces a new notifier_list_empty() helper function
for the purposes of adding an assertion that a XenWatchList is not
freed whilst its associated NotifierList is still occupied.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Anthony Perard <anthony.perard@citrix.com>
Message-Id: <20190913082159.31338-2-paul.durrant@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
|
|
This is so I2C devices can be found in the ACPI namespace. Currently
that's only IPMI, but devices can be easily added now.
Adding the devices required some PCI information, and the bus itself
to be added to the PCMachineState structure.
Note that this only works on Q35, the ACPI for PIIX4 is not capable
of handling an SMBus device.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Pass in the CRS so that it can be set to the SMBus for IPMI later.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
|
|
This will be required for getting IPMI SSIF (SMBus interface) into
the ACPI tables.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
|
|
Pretty straightforward, just hook the current KCS and BT code into
the PCI system with the proper configuration.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: M: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
|
|
PCI device I/O must be >= 8 bytes in length or they don't work.
Allow the size to be passed in, the default size of 2 or 3
won't work.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
|
|
Get ready for PCI and other BT interfaces.
No functional changes, just split the code into generic BT code
and ISA-specific BT code.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
|
|
Get ready for PCI and other KCS interfaces.
No functional changes, just split the code into the generic KCS code
and the ISA-specific code.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
|
|
This is for IPMI, which will behave differently if the UUID is
not set.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: Fam Zheng <famz@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
'remotes/palmer/tags/riscv-for-master-4.2-sf1-v3' into staging
RISC-V Patches for the 4.2 Soft Freeze, Part 1, v3
This contains quite a few patches that I'd like to target for 4.2.
They're mostly emulation fixes for the sifive_u board, which now much
more closely matches the hardware and can therefor run the same fireware
as what gets loaded onto the board. Additional user-visible
improvements include:
* support for loading initrd files from the command line into Linux, via
/chosen/linux,initrd-{start,end} device tree nodes.
* The conversion of LOG_TRACE to trace events.
* The addition of clock DT nodes for our uart and ethernet.
This also includes some preliminary work for the H extension patches,
but does not include the H extension patches as I haven't had time to
review them yet.
This passes my OE boot test on 32-bit and 64-bit virt machines, as well
as a 64-bit upstream Linux boot on the sifive_u machine. It has been
fixed to actually pass "make check" this time.
Changes since v2 (never made it to the list):
* Sets the sifive_u machine default core count to 2 instead of 5.
Changes since v1 <20190910190513.21160-1-palmer@sifive.com>:
* Sets the sifive_u machine default core count to 5 instead of 1, as
it's impossible to have a single core sifive_u machine.
# gpg: Signature made Tue 17 Sep 2019 16:43:30 BST
# gpg: using RSA key 00CE76D1834960DFCE886DF8EF4CA1502CCBAB41
# gpg: issuer "palmer@dabbelt.com"
# gpg: Good signature from "Palmer Dabbelt <palmer@dabbelt.com>" [unknown]
# gpg: aka "Palmer Dabbelt <palmer@sifive.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 00CE 76D1 8349 60DF CE88 6DF8 EF4C A150 2CCB AB41
* remotes/palmer/tags/riscv-for-master-4.2-sf1-v3: (48 commits)
gdbstub: riscv: fix the fflags registers
target/riscv: Use TB_FLAGS_MSTATUS_FS for floating point
target/riscv: Fix mstatus dirty mask
target/riscv: Use both register name and ABI name
riscv: sifive_u: Update model and compatible strings in device tree
riscv: sifive_u: Remove handcrafted clock nodes for UART and ethernet
riscv: sifive_u: Fix broken GEM support
riscv: sifive_u: Instantiate OTP memory with a serial number
riscv: sifive: Implement a model for SiFive FU540 OTP
riscv: roms: Update default bios for sifive_u machine
riscv: sifive_u: Change UART node name in device tree
riscv: sifive_u: Update UART base addresses and IRQs
riscv: sifive_u: Reference PRCI clocks in UART and ethernet nodes
riscv: sifive_u: Add PRCI block to the SoC
riscv: sifive_u: Generate hfclk and rtcclk nodes
riscv: sifive: Implement PRCI model for FU540
riscv: sifive_u: Update PLIC hart topology configuration string
riscv: sifive_u: Update hart configuration to reflect the real FU540 SoC
riscv: sifive_u: Set the minimum number of cpus to 2
riscv: hart: Add a "hartid-base" property to RISC-V hart array
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
In the past we did not have a model for PRCI, hence two handcrafted
clock nodes ("/soc/ethclk" and "/soc/uartclk") were created for the
purpose of supplying hard-coded clock frequencies. But now since we
have added the PRCI support in QEMU, we don't need them any more.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
|
|
At present the GEM support in sifive_u machine is seriously broken.
The GEM block register base was set to a weird number (0x100900FC),
which for no way could work with the cadence_gem model in QEMU.
Not like other GEM variants, the FU540-specific GEM has a management
block to control 10/100/1000Mbps link speed changes, that is mapped
to 0x100a0000. We can simply map it into MMIO space without special
handling using create_unimplemented_device().
Update the GEM node compatible string to use the official name used
by the upstream Linux kernel, and add the management block reg base
& size to the <reg> property encoding.
Tested with upstream U-Boot and Linux kernel MACB drivers.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
|
|
This adds an OTP memory with a given serial number to the sifive_u
machine. With such support, the upstream U-Boot for sifive_fu540
boots out of the box on the sifive_u machine.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
|
|
This implements a simple model for SiFive FU540 OTP (One-Time
Programmable) Memory interface, primarily for reading out the
stored serial number from the first 1 KiB of the 16 KiB OTP
memory reserved by SiFive for internal use.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
|
