| Age | Commit message (Collapse) | Author |
|---|
|
Functions of type FindSysbusDeviceFunc currently return an integer.
However, this return value is always ignored by the caller in
find_sysbus_device().
This changes the function type to return void, to avoid confusion over
the function semantics.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
|
|
Instead of requiring users and management software to be aware of
required CPUID level/xlevel/xlevel2 values for each feature,
automatically increase those values when features need them.
This was already done for CPUID[7].EBX, and is now made generic
for all CPUID feature flags. Unit test included, to make sure we
don't break ABI on older machine-types and don't mess with the
CPUID level values if they are explicitly set by the user.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
|
|
This allows increasing the rx queue size up to 1024: unlike with tx,
guests don't put in huge S/G lists into RX so the risk of running into
the max 1024 limitation due to some off-by-one seems small.
It's helpful for users like OVS-DPDK which don't do any buffering on the
host - 1K roughly matches 500 entries in tun + 256 in the current rx
queue, which seems to work reasonably well. We could probably make do
with ~750 entries but virtio spec limits us to powers of two.
It might be a good idea to specify an s/g size limit in a future
version.
It also might be possible to make the queue size smaller down the road, 64
seems like the minimal value which will still work (as guests seem to
assume a queue full of 1.5K buffers is enough to process the largest
incoming packet, which is ~64K). No one actually asked for this, and
with virtio 1 guests can reduce ring size without need for host
configuration, so don't bother with this for now.
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Jason Wang <jasowang@redhat.com>
Suggested-by: Patrik Hermansson <phermansson@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
|
|
Add IVRS table for AMD IOMMU. Generate IVRS or DMAR
depending on emulated IOMMU.
Signed-off-by: David Kiarie <davidkiarie4@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Introduce PCI macros from for use by AMD IOMMU
Signed-off-by: David Kiarie <davidkiarie4@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
QEMU prints an error message and exits when the device enters an invalid
state. Terminating the process is heavy-handed. The guest may still be
able to function even if there is a bug in a virtio guest driver.
Moreover, exiting is a bug in nested virtualization where a nested guest
could DoS other nested guests by killing a pass-through virtio device.
I don't think this configuration is possible today but it is likely in
the future.
If the broken flag is set, do not process virtqueues or write back used
descriptors. The broken flag can be cleared again by resetting the
device.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
|
|
commit (14c985cff target-i386: present virtual L3 cache info for vcpus)
misplaced compat property putting it in new 2.8 machine type
which would effectively to disable feature until 2.9 is released.
Intent of commit probably should be to disable feature for 2.7
and older while allowing not yet released 2.8 to have feature
enabled by default.
Cc: qemu-stable@nongnu.org
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
|
|
Since commit
bacc344c ("machine: add properties to compat_props incrementaly")
there is no need to chain per machine type compat macro.
Clean up places where it was done anyway so it will be
consistent and won't confuse contributors during addtion
of new machine types.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
|
|
into staging
ppc patch queue 2016-09-23
This pull request supersedes ppc-for-2.8-20160922. There was a clang
build error in that, and I've also added one extra patch in the new pull.
Included in this set of ppc and spapr patches are:
* TCG implementations for more POWER9 instructions
* Some preliminary XICS fixes in preparataion for the pnv machine type
* A significant ADB (Macintosh kbd/mouse) cleanup
* Some conversions to use trace instead of debug macros
* Fixes to correctly handle global TLB flush synchronization in
TCG. This is already a bug, but it will have much more impact
when we get MTTCG
* Add more qtest testcases for Power
* Some MAINTAINERS updates
* Assorted bugfixes
* Add the basics of NUMA associativity to the spapr PCI host bridge
This touches some test files and monitor.c which are technically
outside the ppc code, but coming through this tree because the changes
are primarily of interest to ppc.
# gpg: Signature made Fri 23 Sep 2016 08:14:47 BST
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.8-20160923: (45 commits)
spapr_pci: Add numa node id
monitor: fix crash for platforms without a CPU 0
linux-user: ppc64: fix ARCH_206 bit in AT_HWCAP
ppc/kvm: Mark 64kB page size support as disabled if not available
ppc/xics: An ICS with offset 0 is assumed to be uninitialized
ppc/xics: account correct irq status
Enable H_CLEAR_MOD and H_CLEAR_REF hypercalls on KVM/PPC64.
target-ppc: tlbie/tlbivax should have global effect
target-ppc: add flag in check_tlb_flush()
target-ppc: add TLB_NEED_LOCAL_FLUSH flag
spapr: Introduce sPAPRCPUCoreClass
target-ppc: implement darn instruction
target-ppc: add stxsi[bh]x instruction
target-ppc: add lxsi[bw]zx instruction
target-ppc: add xxspltib instruction
target-ppc: consolidate store conditional
target-ppc: move out stqcx impementation
target-ppc: consolidate load with reservation
target-ppc: convert st[16,32,64]r to use new macro
target-ppc: convert st64 to use new macro
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
This adds a numa id property to a PHB to allow linking passed PCI device
to CPU/memory. It is up to the management stack to do CPU/memory pinning
to the node with the actual PCI device.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[dwg: Renamed property from "node" to "numa_node" to match the similar
one in the pxb device]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
This will make life easier for dealing with dynamically configured
ICSes such as PHB3
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
Each spapr cpu core type defines an instance_init routine which just
populates the CPU class name. This can be done in the class_init
commonly for all core types which simplifies the registration.
This is inspired by how PowerNV core types are registered.
Certain types of spapr cpu cores ('host' and generic type based on host
CPU) are initialized in target-ppc/kvm.c. To convert these type
registrations to use class_init, we need to expose
spapr_cpu_core_class_init() outside of spapr_cpu_core.c.
Commit d11b268e1765 added a generic sPAPR CPU core family
type to support cases like POWER8 CPU type on POWER8E host CPU.
Switching to class_init would fix such scenarios to use the right
CPU thread type instead of defaulting to host-powerpc64-cpu.
In an unrelated cleanup, fix a typo in .get_hotplug_handler routine.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
Add the adb-keys.h file. It maps ADB transition key codes with values.
Signed-off-by: John Arbuckle <programmingkidx@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
Add a first test to validate the protocol:
- rtas/get-time-of-day compares the time
from the guest with the time from the host.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
Whilst according to the Zynq TRM this device covers a register region of
0x000 - 0x120. The register region is also shared with XADCIF prefix
registers at 0x100 and above. Due to how the devcfg and the xadc devices
are implemented in QEMU these are separate models with individual mmio
regions. As such the region registered by the devcfg overlaps with the
xadc when initialized in a machine model (e.g. xilinx-zynq-a9).
This patch fixes up the incorrect region size, where
XLNX_ZYNQ_DEVCFG_R_MAX is missing its '/ 4' causing it to be 0x460 in
size. As well as setting the region size to the 0x0 - 0x100 region so
that an xadc device instance can be registered in the correct region to
pair with the devcfg device instance.
Mapping with XLNX_ZYNQ_DEVCFG_R_MAX = 0x118:
dev: xlnx.ps7-dev-cfg, id ""
mmio 00000000f8007000/0000000000000460
dev: xlnx,zynq-xadc, id ""
mmio 00000000f8007100/0000000000000020
Mapping with XLNX_ZYNQ_DEVCFG_R_MAX = 0x100 / 4:
dev: xlnx.ps7-dev-cfg, id ""
mmio 00000000f8007000/0000000000000100
dev: xlnx,zynq-xadc, id ""
mmio 00000000f8007100/0000000000000020
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 20160921180911.32289-1-nathan@nathanrossi.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Add a new function load_image_targphys_as() that allows the caller
to specify an AddressSpace to use when loading a targphys. The
original load_image_targphys() function doesn't have any change in
functionality.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 87de45de7acf02cbe6bae9d6c4d6fb8f3aba4f61.1474331683.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Add a new function load_uimage_as() that allows the caller to
specify an AddressSpace to use when loading the uImage. The
original load_uimage() function doesn't have any change in
functionality.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1254092e6b80d3cd3cfabafe165d56a96c54c0b5.1474331683.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Add a new function load_elf_as() that allows the caller to specify an
AddressSpace to use when loading the ELF. The original load_elf()
function doesn't have any change in functionality.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 8b5cefecdf56fba4ccdff2db880f0b6b264cf16f.1474331683.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
When loading ROMs allow the caller to specify an AddressSpace to use for
the load.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 85f86b94ea94879e7ce8b12e85ac8de26658f7eb.1474331683.git.alistair.francis@xilinx.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
If the caller didn't specify an architecture for the ELF machine
the load_elf() function will auto detect it based on the ELF file.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: f2d70b47fcad31445f947f8817a0e146d80a046b.1474331683.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
The Cadence GEM hardware allows incoming data to be 'screened' based on some
register values. Add support for these screens.
We also need to increase the max regs to avoid compilation failures. These new
registers are implemented in the next patch.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 73e69a8ad9fa2763e9f68f71eaf2469dd5744fcc.1469727764.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
The Cadence GEM hardware supports N number priority queues, this patch is a
step towards that by adding the property to set the queues. At the moment
behaviour doesn't change as we only use queue 0.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 6543ec0d0c4bfd2678d0ed683efb197e91b17733.1469727764.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Some of the timer devices may behave differently from what ptimer
provides. Introduce ptimer policy feature that allows ptimer users to
change default and wrong timer behaviour, for example to continuously
trigger periodic timer when load value is equal to "0".
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Message-id: 994cd608ec392da6e58f0643800dda595edb9d97.1473252818.git.digetx@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Configure the size of the RAM of the SOC using a property to propagate
the value down to the memory controller from the board level.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 1473438177-26079-14-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
There is no need to do this at each reset as the RAM size will not
change.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 1473438177-26079-12-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Based on previous work done by Andrew Jeffery <andrew@aj.id.au>.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1473438177-26079-9-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
This gives some explanation behind the magic number 0x120CE416.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1473438177-26079-8-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Let's define an object class for each Aspeed SoC we support. A
AspeedSoCInfo struct gathers the SoC specifications which can later be
used by an instance of the class or by a board using the SoC.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 1473438177-26079-4-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
This is a name replacement to prepare ground for other SoCs.
Let's also remove the AST2400_SMC_BASE definition from the address
space mappings, as it is not used. This controller was removed from
the Aspeed SoC AST2500, so this provides us a better common base for
the address space mapping on both SoCs.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1473438177-26079-3-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Let's prepare for new Aspeed SoCs and rename the ast2400 file to a
more generic one. There are no changes in the code apart from the
header file include.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1473438177-26079-2-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Couple of s390x patches:
- fixup for the cpu model patches
- support for virtio 1.1 READ_STATUS command
- update MAINTAINERS file pattern
# gpg: Signature made Mon 19 Sep 2016 10:11:06 BST
# gpg: using RSA key 0xDECF6B93C6F02FAF
# gpg: Good signature from "Cornelia Huck <huckc@linux.vnet.ibm.com>"
# gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>"
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF
* remotes/cohuck/tags/s390x-20160919:
QMP: fixup typos and whitespace damage
virtio-ccw: set revision 2 as maximal revision number
virtio-ccw: respond to READ_STATUS command
MAINTAINERS: update s390 machine file patterns
s390x/kvm: disable cpu model for the 2.7 machine
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
virtio: fixes
virtio feature negotiation rework
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri 16 Sep 2016 19:54:54 BST
# gpg: using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
MAINTAINERS: add virtio-* tests
virtio-bus: Plug devices after features are negotiated
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# MAINTAINERS
|
|
cpu model was merged with 2.8, it is wrong to abuse ri_allowed which
was enabled with 2.7.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
|
|
Currently, devices are plugged before features are negotiated.
If the backend doesn't support VIRTIO_F_VERSION_1, the transport
needs to rewind some settings.
This is the case for CCW, for which a post_plugged callback had
been introduced, where max_rev field is just updated if
VIRTIO_F_VERSION_1 is not supported by the backend.
For PCI, implementing post_plugged would be much more
complicated, so it needs to know whether the backend supports
VIRTIO_F_VERSION_1 at plug time.
Currently, nothing is done for PCI. Modern capabilities get
exposed to the guest even if VIRTIO_F_VERSION_1 is not supported
by the backend, which confuses the guest.
This patch replaces existing post_plugged solution with an
approach that fits with both transports.
Features negotiation is performed before ->device_plugged() call.
A pre_plugged callback is introduced so that the transports can
set their supported features.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: qemu-stable@nongnu.org
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com> [ccw]
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
|
|
Unused function declarations were found using a simple gcc plugin and
manually verified by grepping the sources.
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
Just include the file that is supposed to bring it in.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Implement the new virtio sockets device for host<->guest communication
using the Sockets API. Most of the work is done in a vhost kernel
driver so that virtio-vsock can hook into the AF_VSOCK address family.
The QEMU vhost-vsock device handles configuration and live migration
while the rx/tx happens in the vhost_vsock.ko Linux kernel driver.
The vsock device must be given a CID (host-wide unique address):
# qemu -device vhost-vsock-pci,id=vhost-vsock-pci0,guest-cid=3 ...
For more information see:
http://qemu-project.org/Features/VirtioVsock
[Endianness fixes and virtio-ccw support by Claudio Imbrenda
<imbrenda@linux.vnet.ibm.com>]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
[mst: rebase to master]
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
virtqueue_discard() requires a VirtQueueElement but virtio-balloon does
not migrate its in-use element. Introduce a new function that is
similar to virtqueue_discard() but doesn't require a VirtQueueElement.
This will allow virtio-balloon to access element again after migration
with the usual proviso that the guest may have modified the vring since
last time.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Roman Kagan <rkagan@virtuozzo.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Currently each VQ Notification Virtio Capability is allocated
on a different page. The idea is to enable split drivers within
guests, however there are no known plans to do that.
The allocation will result in a 8MB BAR, more than various
guest firmwares pre-allocates for PCI Bridges hotplug process.
Reserve 4 bytes per VQ by default and add a new parameter
"page-per-vq" to be used with split drivers.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Some software algorithms are based on the hardware's cache info, for example,
for x86 linux kernel, when cpu1 want to wakeup a task on cpu2, cpu1 will trigger
a resched IPI and told cpu2 to do the wakeup if they don't share low level
cache. Oppositely, cpu1 will access cpu2's runqueue directly if they share llc.
The relevant linux-kernel code as bellow:
static void ttwu_queue(struct task_struct *p, int cpu)
{
struct rq *rq = cpu_rq(cpu);
......
if (... && !cpus_share_cache(smp_processor_id(), cpu)) {
......
ttwu_queue_remote(p, cpu); /* will trigger RES IPI */
return;
}
......
ttwu_do_activate(rq, p, 0); /* access target's rq directly */
......
}
In real hardware, the cpus on the same socket share L3 cache, so one won't
trigger a resched IPIs when wakeup a task on others. But QEMU doesn't present a
virtual L3 cache info for VM, then the linux guest will trigger lots of RES IPIs
under some workloads even if the virtual cpus belongs to the same virtual socket.
For KVM, there will be lots of vmexit due to guest send IPIs.
The workload is a SAP HANA's testsuite, we run it one round(about 40 minuates)
and observe the (Suse11sp3)Guest's amounts of RES IPIs which triggering during
the period:
No-L3 With-L3(applied this patch)
cpu0: 363890 44582
cpu1: 373405 43109
cpu2: 340783 43797
cpu3: 333854 43409
cpu4: 327170 40038
cpu5: 325491 39922
cpu6: 319129 42391
cpu7: 306480 41035
cpu8: 161139 32188
cpu9: 164649 31024
cpu10: 149823 30398
cpu11: 149823 32455
cpu12: 164830 35143
cpu13: 172269 35805
cpu14: 179979 33898
cpu15: 194505 32754
avg: 268963.6 40129.8
The VM's topology is "1*socket 8*cores 2*threads".
After present virtual L3 cache info for VM, the amounts of RES IPIs in guest
reduce 85%.
For KVM, vcpus send IPIs will cause vmexit which is expensive, so it can cause
severe performance degradation. We had tested the overall system performance if
vcpus actually run on sparate physical socket. With L3 cache, the performance
improves 7.2%~33.1%(avg:15.7%).
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
This will used by the next patch.
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Simplify a bit the code by using g_strdup_printf() and store it in a
non-const value so casting is no longer needed, and ownership is
clearer.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
|
|
Further cleanup would need to call qemu_free_irq() at the appropriate
time, but for now this silences ASAN about direct leaks.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
|
|
machine_class_base_init() member name is allocated by
machine_class_base_init(), but not freed by
machine_class_finalize(). Simply freeing there doesn't work,
because DEFINE_PC_MACHINE() overwrites it with a literal string.
Fix DEFINE_PC_MACHINE() not to overwrite it, and add the missing
free to machine_class_finalize().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
|
|
qemu_irq is already a pointer, no need to have an extra pointer level.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
|
|
The isa_register_portio_list() function allocates ioports
data/state. Let's keep the reference to this data on some owner. This
isn't enough to fix leaks, but at least, ASAN stops complaining of
direct leaks. Further cleanup would require calling
portio_list_del/destroy().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
into staging
ppc patch queue for 2016-Sep-7
This is my first pull request for the newly opened qemu-2.8 tree. It
contains a heap of things that were too late for 2.7 and have been
queued for a while. In particular:
* A number of preliminary patches for the powernv machine type
* A substantial cleanup of exception handling which will be
necessary to support running a TCG with hypervisor
facilities
* A start on support for POWER9
* Some TCG implementations for new POWER9 instructions
* Some TCG and related cleanups in preparation for POWER9
* Some assorted TCG optimizations
* An implementation of the H_CHANGE_LOGICAL_LAN_MAC hypercall
which allows the MAC address to be changed on the PAPR virtual
NIC.
* Add some extra test cases for several machines (this isn't
strictly in the ppc code, but is most value to ppc)
NOTE: This pull request supersedes ppc-for-2.8-20160906, which had
some problems. Changes:
* Dropped BenH's lmw/stmw speedups, which break for
qemu-system-ppc64 on BE hosts
* A small fix to Thomas' serial output test to avoid a warning on
the isapc machine type.
* Some trivial checkpatch fixes
Note that some of the patches in this series still have large numbers
of checkpatch warnings. This is because they're moving existing code
that predates most of the checkpatch style conventions.
# gpg: Signature made Wed 07 Sep 2016 07:09:27 BST
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.8-20160907: (64 commits)
tests: Check serial output of firmware boot of some machines
tests: Resort check-qtest entries in Makefile.include
spapr: implement H_CHANGE_LOGICAL_LAN_MAC h_call
ppc: Improve a few more helper flags
ppc: Improve the exception helpers flags
ppc: Improve flags for helpers loading/writing the time facilities
ppc: Don't generate dead code on unconditional branches
ppc: Stop dumping state on all exceptions in linux-user
ppc: Fix catching some segfaults in user mode
ppc: Fix macio ESCC legacy mapping
hw/ppc: add a ppc_create_page_sizes_prop() helper routine
hw/ppc: use error_report instead of fprintf
ppc: Rename #include'd .c files to .inc.c
target-ppc: add extswsli[.] instruction
target-ppc: add vsrv instruction
target-ppc: add vslv instruction
target-ppc: add vcmpnez[b,h,w][.] instructions
target-ppc: add vabsdu[b,h,w] instructions
target-ppc: add dtstsfi[q] instructions
target-ppc: implement branch-less divd[o][.]
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
The exact same routine will be used in PowerNV.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
spapr_pci would also be a good candidate but the macro _FDT is
slightly different. It returns and does not exit.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
