aboutsummaryrefslogtreecommitdiff
path: root/include/hw
AgeCommit message (Collapse)Author
2018-04-26serial-isa: Use MAX_ISA_SERIAL_PORTS instead of MAX_SERIAL_PORTSPeter Maydell
The ISA serial port handling in serial-isa.c imposes a limit of 4 serial ports. This is because we only know of 4 IO port and IRQ settings for them, and is unrelated to the generic MAX_SERIAL_PORTS limit, though they happen to both be set at 4 currently. Use a new MAX_ISA_SERIAL_PORTS wherever that is the correct limit to be checking against. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180420145249.32435-11-peter.maydell@linaro.org
2018-04-10e1000: Old machine types, turn new subsection offDr. David Alan Gilbert
Turn the newly added subsection off for old machine types Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-04-09scsi-disk: allow customizing the SCSI versionPaolo Bonzini
We would like to have different behavior for passthrough devices depending on the SCSI version they expose. To prepare for that, allow the user of emulated devices to specify the desired SCSI level, and adjust the emulation according to the property value. The next patch will set the level for scsi-block and scsi-generic devices. Based on a patch by Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-23mach-virt: Set VM's SMBIOS system version to mc->nameWei Huang
Instead of using "1.0" as the system version of SMBIOS, we should use mc->name for mach-virt machine type to be consistent other architectures. With this patch, "dmidecode -t 1" (e.g., "-M virt-2.12,accel=kvm") will show: Handle 0x0100, DMI type 1, 27 bytes System Information Manufacturer: QEMU Product Name: KVM Virtual Machine Version: virt-2.12 Serial Number: Not Specified ... instead of: Handle 0x0100, DMI type 1, 27 bytes System Information Manufacturer: QEMU Product Name: KVM Virtual Machine Version: 1.0 Serial Number: Not Specified ... For backward compatibility, we allow older machine types to keep "1.0" as the default system version. Signed-off-by: Wei Huang <wei@redhat.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Message-id: 20180322212318.7182-1-wei@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-23i.MX: Support serial RS-232 break properlyTrent Piepho
Linux does not detect a break from this IMX serial driver as a magic sysrq. Nor does it note a break in the port error counts. The former is because the Linux driver uses the BRCD bit in the USR2 register to trigger the RS-232 break handler in the kernel, which is where sysrq hooks in. The emulated UART was not setting this status bit. The latter is because the Linux driver expects, in addition to the BRK bit, that the ERR bit is set when a break is read in the FIFO. A break should also count as a frame error, so add that bit too. Cc: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Trent Piepho <tpiepho@impinj.com> Message-id: 20180320013657.25038-1-tpiepho@impinj.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-20Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
virtio,vhost,pci,pc: features, cleanups SRAT tables for DIMM devices new virtio net flags for speed/duplex post-copy migration support in vhost cleanups in pci Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Tue 20 Mar 2018 14:40:43 GMT # gpg: using RSA key 281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: (51 commits) postcopy shared docs libvhost-user: Claim support for postcopy postcopy: Allow shared memory vhost: Huge page align and merge vhost+postcopy: Wire up POSTCOPY_END notify vhost-user: Add VHOST_USER_POSTCOPY_END message libvhost-user: mprotect & madvises for postcopy vhost+postcopy: Call wakeups vhost+postcopy: Add vhost waker postcopy: postcopy_notify_shared_wake postcopy: helper for waking shared vhost+postcopy: Resolve client address postcopy-ram: add a stub for postcopy_request_shared_page vhost+postcopy: Helper to send requests to source for shared pages vhost+postcopy: Stash RAMBlock and offset vhost+postcopy: Send address back to qemu libvhost-user+postcopy: Register new regions with the ufd migration/ram: ramblock_recv_bitmap_test_byte_offset postcopy+vhost-user: Split set_mem_table for postcopy vhost+postcopy: Transmit 'listen' to slave ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # scripts/update-linux-headers.sh
2018-03-20Merge remote-tracking branch ↵Peter Maydell
'remotes/ehabkost/tags/machine-next-pull-request' into staging Machine and x86 queue, 2018-03-19 * cpu_model/cpu_type cleanups * x86: Fix on Intel Processor Trace CPUID checks # gpg: Signature made Mon 19 Mar 2018 20:07:14 GMT # gpg: using RSA key 2807936F984DC5A6 # gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" # Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6 * remotes/ehabkost/tags/machine-next-pull-request: i386: Disable Intel PT if packets IP payloads have LIP values cpu: drop unnecessary NULL check and cpu_common_class_by_name() cpu: get rid of unused cpu_init() defines Use cpu_create(type) instead of cpu_init(cpu_model) cpu: add CPU_RESOLVING_TYPE macro tests: add machine 'none' with -cpu test nios2: 10m50_devboard: replace cpu_model with cpu_type Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-20pc-dimm: make qmp_pc_dimm_device_list() sort devices by addressHaozhong Zhang
Make qmp_pc_dimm_device_list() return sorted by start address list of devices so that it could be reused in places that would need sorted list*. Reuse existing pc_dimm_built_list() to get sorted list. While at it hide recursive callbacks from callers, so that: qmp_pc_dimm_device_list(qdev_get_machine(), &list); could be replaced with simpler: list = qmp_pc_dimm_device_list(); * follow up patch will use it in build_srat() Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> for ppc part Reviewed-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-20hw/pci: remove obsolete PCIDevice->init()Philippe Mathieu-Daudé
All PCI devices are now QOM'ified. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-19hw/arm/bcm2836: Create proper bcm2837 devicePeter Maydell
The bcm2837 is pretty similar to the bcm2836, but it does have some differences. Notably, the MPIDR affinity aff1 values it sets for the CPUs are 0x0, rather than the 0xf that the bcm2836 uses, and if this is wrong Linux will not boot. Rather than trying to have one device with properties that configure it differently for the two cases, create two separate QOM devices for the two SoCs. We use the same approach as hw/arm/aspeed_soc.c and share code and have a data table that might differ per-SoC. For the moment the two types don't actually have different behaviour. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180313153458.26822-7-peter.maydell@linaro.org
2018-03-19hw/arm/bcm2836: Rename bcm2836 type/struct to bcm283xPeter Maydell
Our BCM2836 type is really a generic one that can be any of the bcm283x family. Rename it accordingly. We change only the names which are visible via the header file to the rest of the QEMU code, leaving private function names in bcm2836.c as they are. This is a preliminary to making bcm283x be an abstract parent class to specific types for the bcm2836 and bcm2837. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Andrew Baumann <Andrew.Baumann@microsoft.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180313153458.26822-6-peter.maydell@linaro.org
2018-03-19char: i.MX: Add support for "TX complete" interruptAndrey Smirnov
Add support for "TX complete"/TXDC interrupt generate by real HW since it is needed to support guests other than Linux. Based on the patch by Bill Paul as found here: https://bugs.launchpad.net/qemu/+bug/1753314 Cc: qemu-devel@nongnu.org Cc: qemu-arm@nongnu.org Cc: Bill Paul <wpaul@windriver.com> Cc: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Bill Paul <wpaul@windriver.com> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Message-id: 20180315191141.6789-2-andrew.smirnov@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-19fsl-imx6: Swap Ethernet interrupt definesGuenter Roeck
The sabrelite machine model used by qemu-system-arm is based on the Freescale/NXP i.MX6Q processor. This SoC has an on-board ethernet controller which is supported in QEMU using the imx_fec.c module (actually called imx.enet for this model.) The include/hw/arm/fsm-imx6.h file defines the interrupt vectors for the imx.enet device like this: #define FSL_IMX6_ENET_MAC_1588_IRQ 118 #define FSL_IMX6_ENET_MAC_IRQ 119 According to https://www.nxp.com/docs/en/reference-manual/IMX6DQRM.pdf, page 225, in Table 3-1. ARM Cortex A9 domain interrupt summary, interrupts are as follows. 150 ENET MAC 0 IRQ 151 ENET MAC 0 1588 Timer interrupt where 150 - 32 == 118 151 - 32 == 119 In other words, the vector definitions in the fsl-imx6.h file are reversed. Fixing the interrupts alone causes problems with older Linux kernels: The Ethernet interface will fail to probe with Linux v4.9 and earlier. Linux v4.1 and earlier will crash due to a bug in Ethernet driver probe error handling. This is a Linux kernel problem, not a qemu problem: the Linux kernel only worked by accident since it requested both interrupts. For backward compatibility, generate the Ethernet interrupt on both interrupt lines. This was shown to work from all Linux kernel releases starting with v3.16. Link: https://bugs.launchpad.net/qemu/+bug/1753309 Signed-off-by: Guenter Roeck <linux@roeck-us.net> Message-id: 1520723090-22130-1-git-send-email-linux@roeck-us.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-19Use cpu_create(type) instead of cpu_init(cpu_model)Igor Mammedov
With all targets defining CPU_RESOLVING_TYPE, refactor cpu_parse_cpu_model(type, cpu_model) to parse_cpu_model(cpu_model) so that callers won't have to know internal resolving cpu type. Place it in exec.c so it could be called from both target independed vl.c and *-user/main.c. That allows us to stop abusing cpu type from MachineClass::default_cpu_type as resolver class in vl.c which were confusing part of cpu_parse_cpu_model(). Also with new parse_cpu_model(), the last users of cpu_init() in null-machine.c and bsd/linux-user targets could be switched to cpu_create() API and cpu_init() API will be removed by follow up patch. With no longer users left remove MachineState::cpu_model field, new code should use MachineState::cpu_type instead and leave cpu_model parsing to generic code in vl.c. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <1518000027-274608-5-git-send-email-imammedo@redhat.com> [ehabkost: Fix bsd-user build error] Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-03-18hw/ppc/prep: Fix implicit creation of "-drive if=scsi" devicesThomas Huth
The global hack for creating SCSI devices has recently been removed, but this apparently broke SCSI devices on some boards that were not ready for this change yet. For the 40p machine you now get: $ ppc64-softmmu/qemu-system-ppc64 -M 40p -cdrom x.iso qemu-system-ppc64: -cdrom x.iso: machine type does not support if=scsi,bus=0,unit=2 Fix it by providing a lsi53c810_create() function that takes care of calling scsi_bus_legacy_handle_cmdline() after creating the corresponding SCSI controller. Fixes: 1454509726719e0933c800fad00d6999752688ea Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-03-16pc: correct misspelled CPU model-id for pc 2.2Wang Xin
Signed-off-by: Wang Xin <wangxinxin.wang@huawei.com> Message-Id: <1517367668-25048-1-git-send-email-wangxinxin.wang@huawei.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-03-16Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
* Record-replay lockstep execution, log dumper and fixes (Alex, Pavel) * SCSI fix to pass maximum transfer size (Daniel Barboza) * chardev fixes and improved iothread support (Daniel Berrangé, Peter) * checkpatch tweak (Eric) * make help tweak (Marc-André) * make more PCI NICs available with -net or -nic (myself) * change default q35 NIC to e1000e (myself) * SCSI support for NDOB bit (myself) * membarrier system call support (myself) * SuperIO refactoring (Philippe) * miscellaneous cleanups and fixes (Thomas) # gpg: Signature made Mon 12 Mar 2018 16:10:52 GMT # gpg: using RSA key BFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (69 commits) tcg: fix cpu_io_recompile replay: update documentation replay: save vmstate of the asynchronous events replay: don't process async events when warping the clock scripts/replay-dump.py: replay log dumper replay: avoid recursive call of checkpoints replay: check return values of fwrite replay: push replay_mutex_lock up the call tree replay: don't destroy mutex at exit replay: make locking visible outside replay code replay/replay-internal.c: track holding of replay_lock replay/replay.c: bump REPLAY_VERSION again replay: save prior value of the host clock replay: added replay log format description replay: fix save/load vm for non-empty queue replay: fixed replay_enable_events replay: fix processing async events cpu-exec: fix exception_index handling hw/i386/pc: Factor out the superio code hw/alpha/dp264: Use the TYPE_SMC37C669_SUPERIO ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # default-configs/i386-softmmu.mak # default-configs/x86_64-softmmu.mak
2018-03-13tests: acpi: don't read all fields in test_acpi_fadt_table()Igor Mammedov
there is no point to read fields here but not actually checking them so drop it and read only header + dsdt/facs addresses since it's needed later to fetch that tables. With this cleanup we can get rid of AcpiFadtDescriptorRev3/ ACPI_FADT_COMMON_DEF which have no users left. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-13virt_arm: acpi: reuse common build_fadt()Igor Mammedov
Extend generic build_fadt() to support rev5.1 FADT and reuse it for 'virt' board, it would allow to phase out usage of AcpiFadtDescriptorRev5_1 and later ACPI_FADT_COMMON_DEF. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-13acpi: move build_fadt() from i386 specific to generic ACPI sourceIgor Mammedov
It will be extended and reused by follow up patch for ARM target. PS: Since it's generic function now, don't patch FIRMWARE_CTRL, DSDT fields if they don't point to tables since platform might not provide them and use X_ variants instead if applicable. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-13pc: acpi: isolate FADT specific data into AcpiFadtData structureIgor Mammedov
move FADT data initialization out of fadt_setup() into dedicated init_fadt_data() that will set common for pc/q35 values in AcpiFadtData structure and acpi_get_pm_info() will complement it with pc/q35 specific values initialization. That will allow to get rid of fadt_setup() and generalize build_fadt() so it could be easily extended for rev5 and reused by ARM target. While at it also move facs/dsdt/xdsdt offsets from build_fadt() arg list into AcpiFadtData, as they belong to the same dataset. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-13acpi: move ACPI_PORT_SMI_CMD define to header it belongs toIgor Mammedov
ACPI_PORT_SMI_CMD is alias for APM_CNT_IOPORT, so make it really one instead of duplicating its value. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-13acpi: add build_append_gas() helper for Generic Address StructureIgor Mammedov
it will help to add Generic Address Structure to ACPI tables without using packed C structures and avoid endianness issues as API doesn't need an explicit conversion. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-13acpi: reuse AcpiGenericAddress instead of Acpi20GenericAddressIgor Mammedov
Drop duplicate in form of Acpi20GenericAddress and reuse AcpiGenericAddress. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-13virtio-net: add linkspeed and duplex settings to virtio-netJason Baron
Although linkspeed and duplex can be set in a linux guest via 'ethtool -s', this requires custom ethtool commands for virtio-net by default. Introduce a new feature flag, VIRTIO_NET_F_SPEED_DUPLEX, which allows the hypervisor to export a linkspeed and duplex setting. The user can subsequently overwrite it later if desired via: 'ethtool -s'. Linkspeed and duplex settings can be set as: '-device virtio-net,speed=10000,duplex=full' where speed is [0...INT_MAX], and duplex is ["half"|"full"]. Signed-off-by: Jason Baron <jbaron@akamai.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: virtio-dev@lists.oasis-open.org Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-13virtio-net: use 64-bit values for feature flagsJason Baron
In prepartion for using some of the high order feature bits, make sure that virtio-net uses 64-bit values everywhere. Signed-off-by: Jason Baron <jbaron@akamai.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: virtio-dev@lists.oasis-open.org Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-13vfio-pci: Allow mmap of MSIX BARAlexey Kardashevskiy
At the moment we unconditionally avoid mapping MSIX data of a BAR and emulate MSIX table in QEMU. However it is 1) not always necessary as a platform may provide a paravirt interface for MSIX configuration; 2) can affect the speed of MMIO access by emulating them in QEMU when frequently accessed registers share same system page with MSIX data, this is particularly a problem for systems with the page size bigger than 4KB. A new capability - VFIO_REGION_INFO_CAP_MSIX_MAPPABLE - has been added to the kernel [1] which tells the userspace that mapping of the MSIX data is possible now. This makes use of it so from now on QEMU tries mapping the entire BAR as a whole and emulate MSIX on top of that. [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=a32295c612c57990d17fb0f41e7134394b2f35f6 Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2018-03-13vfio/display: adding dmabuf supportGerd Hoffmann
Wire up dmabuf-based display. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2018-03-13vfio/display: adding region supportGerd Hoffmann
Wire up region-based display. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed By: Kirti Wankhede <kwankhede@nvidia.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2018-03-13machine: add memory-encryption optionBrijesh Singh
When CPU supports memory encryption feature, the property can be used to specify the encryption object to use when launching an encrypted guest. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Marcel Apfelbaum <marcel@redhat.com> Cc: Stefan Hajnoczi <stefanha@gmail.com> Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-12hw/isa/superio: Add the SMC FDC37C669 Super I/OPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180308223946.26784-23-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-12hw/isa/vt82c686: Add the TYPE_VT82C686B_SUPERIOPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180308223946.26784-20-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-12hw/isa/vt82c686: Rename vt82c686b_init() -> vt82c686b_isa_init()Philippe Mathieu-Daudé
This function only initialize the ISA bus. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180308223946.26784-19-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-12hw/isa/superio: Factor out the FDC37M817 Super I/O from mips_malta.cPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180308223946.26784-17-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-12hw/isa/superio: Factor out the IDE code from pc87312.cPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180308223946.26784-15-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-12hw/isa/superio: Add a keyboard/mouse controller (8042)Philippe Mathieu-Daudé
Since the PC87312 inherits this abstract model, we remove the I8042 instance in the PREP machine. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: David Gibson <david@gibson.dropbear.id.au> Message-Id: <20180308223946.26784-14-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-12hw/isa/superio: Factor out the floppy disc controller code from pc87312.cPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180308223946.26784-13-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-12hw/isa/superio: Factor out the serial code from pc87312.cPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180308223946.26784-12-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-12hw/isa/superio: Factor out the parallel code from pc87312.cPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180308223946.26784-11-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-12hw/isa/pc87312: Inherit from the abstract TYPE_ISA_SUPERIOPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180308223946.26784-10-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-12hw/isa/superio: Add a Super I/O template based on the PC87312 devicePhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180308223946.26784-9-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-12hw/isa/pc87312: Use uint16_t for the ISA I/O base addressPhilippe Mathieu-Daudé
This matches the isa_register_ioport() prototype. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180308223946.26784-7-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-12hw/isa/pc87312: Rename the device type as TYPE_PC87312_SUPERIOPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: David Gibson <david@gibson.dropbear.id.au> (hw/ppc) Message-Id: <20180308223946.26784-6-f4bug@amsat.org> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-12hw/input/i8042: Extract declarations from i386/pc.h into input/i8042.hPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: David Gibson <david@gibson.dropbear.id.au> (hw/ppc) Message-Id: <20180308223946.26784-4-f4bug@amsat.org> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-12hw/dma/i8257: Rename DMA_init() to i8257_dma_init()Philippe Mathieu-Daudé
- Move the header from hw/isa/ to hw/dma/ - Remove the old i386/pc dependency - use a bool type for the high_page_enable argument Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180308223946.26784-3-f4bug@amsat.org> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-12hw/isa: Move parallel_hds_isa_init() to hw/char/parallel-isa.cPhilippe Mathieu-Daudé
Again... (after 07dc788054d7 and 9157eee1b1c0). We now extract the ISA bus specific helpers. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180308223946.26784-2-f4bug@amsat.org> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-12hw/mips/jazz: Fix implicit creation of "-drive if=scsi" devicesThomas Huth
The global hack for creating SCSI devices has recently been removed, but this apparently broke SCSI devices on some boards that were not ready for this change yet. For the pica61 machine you now get: $ mips64-softmmu/qemu-system-mips64 -M pica61 -cdrom x.iso qemu-system-mips64: -cdrom x.iso: machine type does not support if=scsi,bus=0,unit=2 Fix it by calling scsi_bus_legacy_handle_cmdline() after creating the corresponding SCSI controller. Fixes: 1454509726719e0933c800fad00d6999752688ea Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1520414644-11535-1-git-send-email-thuth@redhat.com> Reviewed-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-12q35: change default NIC to e1000ePaolo Bonzini
The e1000 NIC is getting old and is not a very good default for a PCIe machine type. Change it to e1000e, which should be supported by a good number of guests. In particular, drivers for 82574 were added first to Linux 2.6.27 (2008) and Windows 2008 R2. This does mean that Windows 2008 will not work anymore with Q35 machine types and a default "-net nic -net xxx" network configuration; it did work before because it does have an AHCI driver. However, Windows 2008 has been declared out of main stream support in 2015. It will get out of extended support in 2020. Windows 2008 R2 has the same end of support dates and, since the two are basically Vista vs. Windows 7, R2 probably is more popular. Reviewed-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-09i.MX: Add i.MX7 SOC implementation.Andrey Smirnov
The following interfaces are partially or fully emulated: * up to 2 Cortex A9 cores (SMP works with PSCI) * A7 MPCORE (identical to A15 MPCORE) * 4 GPTs modules * 7 GPIO controllers * 2 IOMUXC controllers * 1 CCM module * 1 SVNS module * 1 SRC module * 1 GPCv2 controller * 4 eCSPI controllers * 4 I2C controllers * 7 i.MX UART controllers * 2 FlexCAN controllers * 2 Ethernet controllers (FEC) * 3 SD controllers (USDHC) * 4 WDT modules * 1 SDMA module * 1 GPR module * 2 USBMISC modules * 2 ADC modules * 1 PCIe controller Tested to boot and work with upstream Linux (4.13+) guest. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> [PMM: folded a couple of long lines] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-09pci: Add support for Designware IP blockAndrey Smirnov
Add code needed to get a functional PCI subsytem when using in conjunction with upstream Linux guest (4.13+). Tested to work against "e1000e" (network adapter, using MSI interrupts) as well as "usb-ehci" (USB controller, using legacy PCI interrupts). Based on "i.MX6 Applications Processor Reference Manual" (Document Number: IMX6DQRM Rev. 4) as well as corresponding dirver in Linux kernel (circa 4.13 - 4.16 found in drivers/pci/dwc/*) Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-17 18:22:24 +0000