aboutsummaryrefslogtreecommitdiff
path: root/include/hw
AgeCommit message (Collapse)Author
2017-01-20hw/intc/arm_gic: Add external IRQ lines for VIRQ and VFIQPeter Maydell
Augment the GIC's QOM device interface by adding two new sets of sysbus IRQ lines, to signal VIRQ and VFIQ to each CPU. We never use these, but it's helpful to keep the v2-and-earlier GIC's external interface in line with that of the GICv3 to avoid board code having to add extra code conditional on which version of the GIC is in use. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 1483977924-14522-3-git-send-email-peter.maydell@linaro.org
2017-01-20hw/intc/arm_gicv3: Add external IRQ lines for VIRQ and VFIQPeter Maydell
Augment the GICv3's QOM device interface by adding two new sets of sysbus IRQ lines, to signal VIRQ and VFIQ to each CPU. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 1483977924-14522-2-git-send-email-peter.maydell@linaro.org
2017-01-20aspeed/smc: handle SPI flash Command modeCédric Le Goater
The Aspeed SMC controllers have a mode (Command mode) in which accesses to the flash content are no different than doing MMIOs. The controller generates all the necessary commands to load (or store) data in memory. However, accesses are restricted to the segment window assigned the the flash module by the controller. This window is defined by the Segment Address Register. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1483979087-32663-8-git-send-email-clg@kaod.org [PMM: Deleted now-unused aspeed_smc_is_usermode() function] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-20aspeed/smc: adjust the size of the register regionCédric Le Goater
The SPI controller of the AST2400 SoC has less registers. So we can adjust the size of the memory region holding the registers depending on the controller type. We can also remove the guest_error logging which is useless as the range of the region is strict enough. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 1483979087-32663-7-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-20aspeed/smc: unfold the AspeedSMCController arrayCédric Le Goater
This is getting difficult to read. Also add a 'has_dma' field for each controller type. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1483979087-32663-6-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-20virtio-ccw: fix ring sizingMichael S. Tsirkin
Current code seems to assume ring size is always decreased but this is not required by spec: what spec says is just that size can not exceed the maximum. Fix it up. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <1484256243-1982-1-git-send-email-mst@redhat.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2017-01-20m68k: QOMify the MCF Fast Ethernet Controller deviceThomas Huth
When running qemu-system-m68k with the "-net" parameter (for example simply "-net nic -net user"), there is currently a confusing warning message saying: Warning: requested NIC (anonymous, model mcf_fec) was not created (not supported by this machine?) This seems to happen because the MCF NIC has never been adapted to the currently expected QEMU device behavior. Thus let's QOMify the NIC now to get rid of the warning message. Signed-off-by: Thomas Huth <huth@tuxfamily.org> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-01-18target-sparc: move common cpu initialisation routines to sparc64.cArtyom Tarasenko
Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2017-01-18target-sparc: implement sun4v RTCArtyom Tarasenko
Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
2017-01-18fw-cfg: bump "x-file-slots" to 0x20 for 2.9+ machine typesLaszlo Ersek
More precisely, the "x-file-slots" count is bumped for all machine types that: (a) use fw_cfg, and (b) are not versioned (hence migration is not expected to work for them across QEMU releases anyway), or have version 2.9. This affects machine types implemented in the following source files: - "hw/arm/virt.c". The "virt-*" machine type is versioned, and the <= 2.8 versions already depend on HW_COMPAT_2_8 (see commit e353aac51b944). Therefore adding the "x-file-slots" compat values to HW_COMPAT_2_8 suffices. - "hw/i386/pc.c". The "pc-i440fx-*" (including "pc-*") and "pc-q35-*" machine types are versioned. Modifying HW_COMPAT_2_8 is sufficient here too (see commit "pc: Add 2.9 machine-types"). The "isapc" machtype is not versioned. The "xenfv" machine type, which uses fw_cfg for direct kernel booting, is also not versioned. - "hw/ppc/mac_newworld.c". The "mac99" machine type is not versioned. - "hw/ppc/mac_oldworld.c". The "g3beige" machine type is not versioned. - "hw/sparc/sun4m.c". None of the 9 machine types defined in this file appear versioned. - "hw/sparc64/sun4u.c". None of the 3 machine types defined in this file appear versioned. Cc: "Gabriel L. Somlo" <somlo@cmu.edu> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Alexander Graf <agraf@suse.de> Cc: Anthony Perard <anthony.perard@citrix.com> Cc: Artyom Tarasenko <atar4qemu@gmail.com> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Gabriel Somlo <somlo@cmu.edu> Tested-by: Gabriel Somlo <somlo@cmu.edu> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
2017-01-18pc: Add 2.9 machine-typesEduardo Habkost
Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Laszlo Ersek <lersek@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Gabriel Somlo <somlo@cmu.edu> Tested-by: Gabriel Somlo <somlo@cmu.edu> Cc: Gabriel Somlo <somlo@cmu.edu> Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
2017-01-18fw-cfg: turn FW_CFG_FILE_SLOTS into a device propertyLaszlo Ersek
We'd like to raise the value of FW_CFG_FILE_SLOTS. Doing it naively could lead to problems with backward migration: a more recent QEMU (running an older machine type) would allow the guest, in fw_cfg_select(), to select a high key value that is unavailable in the same machine type implemented by the older (target) QEMU. On the target host, fw_cfg_data_read() for example could dereference nonexistent entries. As first step, size the FWCfgState.entries[*] and FWCfgState.entry_order arrays dynamically. All three array sizes will be influenced by the new field FWCfgState.file_slots (and matching device property). Make the following changes: - Replace the FW_CFG_FILE_SLOTS macro with FW_CFG_FILE_SLOTS_MIN (minimum count of fw_cfg file slots) in the header file. The value remains 0x10. - Replace all uses of FW_CFG_FILE_SLOTS with a helper function called fw_cfg_file_slots(), returning the new property. - Eliminate the macro FW_CFG_MAX_ENTRY, and replace all its uses with a helper function called fw_cfg_max_entry(). - In the MMIO- and IO-mapped realize functions both, allocate all three arrays dynamically, based on the new property. - The new property defaults to FW_CFG_FILE_SLOTS_MIN. This is going to be customized in the following patches. Cc: "Gabriel L. Somlo" <somlo@cmu.edu> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Gabriel Somlo <somlo@cmu.edu> Tested-by: Gabriel Somlo <somlo@cmu.edu> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
2017-01-18fw-cfg: support writeable blobsMichael S. Tsirkin
Useful to send guest data back to QEMU. Changes from Laszlo Ersek <lersek@redhat.com>: - rebase the patch from Michael Tsirkin's original postings at [1] and [2] to the following patches: - loader: Allow a custom AddressSpace when loading ROMs - loader: Add AddressSpace loading support to uImages - loader: fix handling of custom address spaces when adding ROM blobs - reject such writes immediately that would exceed the end of the array, rather than performing a partial write before setting the error bit: see the (len != dma.length) condition - document the write interface [1] http://lists.nongnu.org/archive/html/qemu-devel/2016-02/msg04968.html [2] http://lists.nongnu.org/archive/html/qemu-devel/2016-03/msg02735.html Cc: "Gabriel L. Somlo" <somlo@cmu.edu> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Michael Walle <michael@walle.cc> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Shannon Zhao <zhaoshenglong@huawei.com> Cc: qemu-arm@nongnu.org Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Acked-by: Gabriel Somlo <somlo@cmu.edu> Tested-by: Gabriel Somlo <somlo@cmu.edu> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
2017-01-18vhost_net: device IOTLB supportJason Wang
This patches implements Device IOTLB support for vhost kernel. This is done through: 1) switch to use dma helpers when map/unmap vrings from vhost codes 2) introduce a set of VhostOps to: - setting up device IOTLB request callback - processing device IOTLB request - processing device IOTLB invalidation 2) kernel support for Device IOTLB API: - allow vhost-net to query the IOMMU IOTLB entry through eventfd - enable the ability for qemu to update a specified mapping of vhost - through ioctl. - enable the ability to invalidate a specified range of iova for the device IOTLB of vhost through ioctl. In x86/intel_iommu case this is triggered through iommu memory region notifier from device IOTLB invalidation descriptor processing routine. With all the above, kernel vhost_net can co-operate with userspace IOMMU. For vhost-user, the support could be easily done on top by implementing the VhostOps. Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-01-16hw: move reset handlers from vl.c to hw/corePaolo Bonzini
They are small, it is not worth stubbing them. Just include them in user-mode emulators and unit tests as well. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-16smbios: filter based on CONFIG_SMBIOS rather than TARGETLeif Lindholm
-smbios command line options were accepted but silently ignored on TARGET_ARM, due to a test for TARGET_I386 in arch_init.c. Copy the mechanism of hw/pci/pci-stub.c to implement an smbios-stub instead, enabled for all targets without CONFIG_SMBIOS. Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org> Message-Id: <20161222151828.28292-1-leif.lindholm@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-10memhp: don't generate memory hotplug AML if it's not enabled/supportedIgor Mammedov
That reduces DSDT by 910 bytes when memory hotplug isn't enabled. While doing so drop intermediate variables/arguments passing around ACPI_MEMORY_HOTPLUG_IO_LEN and making it local to memory_hotplug.c, hardcoding it there as it can't change. Also don't pass around ACPI_MEMORY_HOTPLUG_BASE through intermediate variables/arguments where it's not needed. Instead initialize in module static variable when MMIO region is mapped and use that within memory_hotplug.c whenever it's required. That way MMIO base specified only at one place and AML with MMIO would always use the same value. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2017-01-10memhp: move memory hotplug only defines to memory_hotplug.cIgor Mammedov
Move defines used locally only by memory_hotplug.c into it from header files. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2017-01-10memhp: move GPE handler_E03 into build_memory_hotplug_aml()Igor Mammedov
>From this patch all the memory hotplug related AML bits are consolidated in one place within DSTD. Follow up patches will utilize that to simplify memory hotplug related C/AML code. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2017-01-10memhp: merge build_memory_devices() into build_memory_hotplug_aml()Igor Mammedov
It consolidates memory hotplug AML in one place within DSDT Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-01-10memhp: consolidate scattered MHPD device declarationIgor Mammedov
since static and dynamic parts of memory MHPD device are now in the same table (DSDT), there is no point keeping them scattered across the table, so consolidate it in one place. There aren't any functional change, only AML text movement from externally refferenced MHPD scope directly into MHPD device declaration. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2017-01-10memhp: move build_memory_devices() into memory_hotplug.cIgor Mammedov
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2017-01-10virtio-net: Add MTU feature supportMaxime Coquelin
This patch allows advising guest with host MTU's by setting host_mtu parameter. If VIRTIO_NET_F_MTU has been successfully negotiated, MTU value is passed to the backend. Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Aaron Conole <aconole@redhat.com Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-01-10vhost-user: Add MTU protocol feature and opMaxime Coquelin
This patch implements VHOST_USER_PROTOCOL_F_NET_MTU protocol feature and VHOST_USER_NET_SET_MTU request so that the backend gets notified of the user defined host MTU. If backend supports VHOST_USER_PROTOCOL_F_REPLY_ACK, QEMU assumes MTU is valid if success is returned. Vhost-net driver sends this request through a new vhost_net_set_mtu vhost_ops entry. Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Aaron Conole <aconole@redhat.com> Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-01-10virtio: Introduce virtqueue_drop_all procedureYuri Benditovich
Add procedure for fast drop of queued packets, acting like pop and push without mapping the buffers into memory. Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-01-10net: Add virtio queue interface to update used index from vring stateYuri Benditovich
Bring virtio queue to correct internal state for host-to-guest operations when vhost is temporary stopped. Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-01-10pcie_aer: support configurable AER capa versionDou Liyang
Now, AER capa version is fixed to v2, if assigned device isn't v2, then this value will be inconsistent between guest and host Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com> Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-01-10pcie_aer: Convert pcie_aer_init to ErrorCao jin
When user specify invalid value for property aer_log_max, device should fail to create, and report appropriate message. Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Acked-by: Dmitry Fleytman <dmitry@daynix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-01-10acpi: add ATSR for q35Jason Wang
This patch provides ATSR which was a requirement for software that wants to enable ATS on endpoint devices behind a Root Port. This is done simply by setting ALL_PORTS which indicates all PCI-Express Root Ports support ATS transactions. Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-01-10virtio-pci: address space translation service (ATS) supportJason Wang
This patches enable the Address Translation Service support for virtio pci devices. This is needed for a guest visible Device IOTLB implementation and will be required by vhost device IOTLB API implementation for intel IOMMU. Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-01-10intel_iommu: support device iotlb descriptorJason Wang
This patch enables device IOTLB support for intel iommu. The major work is to implement QI device IOTLB descriptor processing and notify the device through iommu notifier. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com>
2017-01-10virtio: convert to use DMA apiJason Wang
Currently, all virtio devices bypass IOMMU completely. This is because address_space_memory is assumed and used during DMA emulation. This patch converts the virtio core API to use DMA API. This idea is - introducing a new transport specific helper to query the dma address space. (only pci version is implemented). - query and use this address space during virtio device guest memory accessing when iommu platform (VIRTIO_F_IOMMU_PLATFORM) was enabled for this device. Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Amit Shah <amit.shah@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: qemu-block@nongnu.org Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-01-09hw/arm/virt-acpi-build: Don't incorrectly claim architectural timer to be ↵Andrew Jones
edge-triggered This is the ACPI equivalent to "hw/arm/virt: Don't incorrectly claim architectural timer to be edge-triggered" which fixes the DT for machine types 2.9 and later. Signed-off-by: Andrew Jones <drjones@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20170102200153.28864-15-drjones@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-09hw/arm/virt: remove VirtGuestInfoAndrew Jones
by moving VirtGuestInfo.fw_cfg to VirtMachineState. This is the mach-virt equivalent of "pc: Move PcGuestInfo.fw_cfg to PCMachineState" and "pc: Eliminate PcGuestInfo struct" combined. Signed-off-by: Andrew Jones <drjones@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20170102200153.28864-14-drjones@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-09hw/arm/virt-acpi-build: remove redundant members from VirtGuestInfoAndrew Jones
Now that we pass VirtMachineState, and guest-info is just part of that state, we can remove all the redundant members and access the VirtMachineState directly. Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20170102200153.28864-12-drjones@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-09hw/arm/virt: pass VirtMachineState instead of VirtGuestInfoAndrew Jones
Only two functions take VirtGuestInfo parameters. Now that guest-info is part of VirtMachineState, and VirtMachineState is defined in the virt header, pass that instead. Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20170102200153.28864-11-drjones@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-09hw/arm/virt: move VirtMachineState/Class to virt.hAndrew Jones
In preparation to share more Virt machine state than just guest-info with other mach-virt source files, move the State and Class structures to virt.h Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20170102200153.28864-10-drjones@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-09hw/arm/virt: remove include/hw/arm/virt-acpi-build.hAndrew Jones
include/hw/arm/virt-acpi-build.h is only used for VirtGuestInfo, which doesn't even necessarily have to be ACPI specific. Move VirtGuestInfo to include/hw/arm/virt.h, allowing us to remove include/hw/arm/virt-acpi-build.h, and to prepare for even more code motion. Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20170102200153.28864-9-drjones@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-09hw/arm/virt: eliminate struct VirtGuestInfoStateAndrew Jones
Instead of allocating a new struct just for VirtGuestInfo and the machine_done Notifier, place them inside VirtMachineState. This is the mach-virt equivalent of "pc: Eliminate struct PcGuestInfoState" Suggested-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20170102200153.28864-8-drjones@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-09hw/arm/virt-acpi-build: fadt: improve flag namingAndrew Jones
Signed-off-by: Andrew Jones <drjones@redhat.com> Message-id: 20170102200153.28864-5-drjones@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-09hw/arm/virt-acpi-build: gtdt: improve flag namingAndrew Jones
Also remove all unused flags. Signed-off-by: Andrew Jones <drjones@redhat.com> Message-id: 20170102200153.28864-4-drjones@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-09hw/arm/virt-acpi-build: name GIC CPU Interface Structure appropriatelyAndrew Jones
Also move the enabled flag definition from mach-virt code to acpi common. Signed-off-by: Andrew Jones <drjones@redhat.com> Message-id: 20170102200153.28864-3-drjones@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-09i2c: Allow I2C devices to NAK start eventsCorey Minyard
Add a return value to the event handler. Some I2C devices will NAK if they have no data, so allow them to do this. This required the following changes: Go through all the event handlers and change them to return int and return 0. Modify i2c_start_transfer to terminate the transaction on a NAK. Modify smbus handing to not assert if a NAK occurs on a second operation, and terminate the transaction and return -1 instead. Add some information on semantics to I2CSlaveClass. Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-05Merge remote-tracking branch 'remotes/kraxel/tags/pull-vga-20170103-1' into ↵Peter Maydell
staging virtio-gpu: misc bugfixes. # gpg: Signature made Tue 03 Jan 2017 14:48:04 GMT # gpg: using RSA key 0x4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/pull-vga-20170103-1: virtio-gpu: fix memory leak in resource attach backing virtio-gpu-3d: fix memory leak in resource attach backing virtio-gpu: call cleanup mapping function in resource destroy virtio-gpu: track and limit host memory allocations display: virtio-gpu-3d: check virgl capabilities max_size Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-12-27aspeed: add the definitions for the AST2400 A1 SoCCédric Le Goater
There is not much differences with the A0 revision apart from the DDR calibration. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1480434248-27138-10-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-12-27aspeed: add a memory region for SRAMCédric Le Goater
The size of the SRAM depends on the SoC model, so use a per-soc definition when creating the region. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1480434248-27138-9-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-12-27aspeed: QOMify the CPU object and attach it to the SoCCédric Le Goater
Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1480434248-27138-4-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-12-27hw/arm/virt: add 2.9 machine typePeter Maydell
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com>
2016-12-22kvmclock: reduce kvmclock difference on migrationMarcelo Tosatti
Check for KVM_CAP_ADJUST_CLOCK capability KVM_CLOCK_TSC_STABLE, which indicates that KVM_GET_CLOCK returns a value as seen by the guest at that moment. For new machine types, use this value rather than reading from guest memory. This reduces kvmclock difference on migration from 5s to 0.1s (when max_downtime == 5s). Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Message-Id: <20161121105052.598267440@redhat.com> [Add comment explaining what is going on. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-12-22pc: make pit configurableChao Peng
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com> Message-Id: <1478330391-74060-4-git-send-email-chao.p.peng@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-16 14:21:47 +0000