aboutsummaryrefslogtreecommitdiff
path: root/include/hw
AgeCommit message (Collapse)Author
2014-06-19pc-dimm: add busy slot check and slot auto-allocationIgor Mammedov
- if slot property is not specified on -device/device_add command, treat default value as request for assigning PCDIMMDevice to the first free slot. - if slot is provided with -device/device_add command, attempt to use it or fail command if it's already occupied. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19pc-dimm: add busy address check and address auto-allocationIgor Mammedov
- if 'addr' property is not specified on -device/device_add command, treat the default value as request for assigning PCDIMMDevice to the first free memory region. - if 'addr' is provided with -device/device_add command, attempt to use it or fail command if it's already occupied or falls inside of an existing PCDIMMDevice memory region. Note: GCompareFunc(a, b) used by g_slist_insert_sorted() returns 'gint', however it might be too small to fit difference between 2 addresses. So use 128bit to calculate the difference and normalize result to -1/0/1 return values. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Andrey Korolyov <andrey@xdel.ru> MST: commit log tweaks
2014-06-19pc: add memory hotplug handler to PC_MACHINEIgor Mammedov
that will perform mapping of PC_DIMM device into guest's RAM address space Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19pc: add 'etc/reserved-memory-end' fw_cfg interface for SeaBIOSIgor Mammedov
'etc/reserved-memory-end' will allow QEMU to tell BIOS where PCI BARs mapping could safely start in high memory. Allowing BIOS to start mapping 64-bit PCI BARs at address where it wouldn't conflict with other mappings QEMU might place before it. That permits QEMU to reserve extra address space before 64-bit PCI hole for memory hotplug. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19pc: exit QEMU if number of slots more than supported 256Igor Mammedov
... which is imposed by current naming scheme of ACPI memory devices. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19pc: initialize memory hotplug address spaceIgor Mammedov
initialize and map hotplug memory address space container into guest's RAM address space. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19pc: implement pc-dimm device abstractionVasilis Liaskovitis
Each hotplug-able memory slot is a PCDIMMDevice. A hot-add operation for a memory device: - creates a new PCDIMMDevice and makes hotplug controller to map it into guest address space Hotplug operations are done through normal device_add commands. For migration case, all hotplugged memory devices on source should be specified on target's command line using '-device' option with properties set to the same values as on source. To simplify review, patch introduces only PCDIMMDevice QOM skeleton that will be extended by following patches to implement actual memory hotplug and related functions. Signed-off-by: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com> Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19qdev: hotplug for bus-less devicesIgor Mammedov
Add get_hotplug_handler() method to machine, and make bus-less device use it during hotplug as a means to discover a hotplug handler controller. The returned controller is used to perform hotplug actions. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19vl.c: extend -m option to support options for memory hotplugIgor Mammedov
Add following parameters: "slots" - total number of hotplug memory slots "maxmem" - maximum possible memory "slots" and "maxmem" should go in pair and "maxmem" should be greater than "mem" for memory hotplug to be enabled. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> MST: fix build on 32 bit
2014-06-19virtio-scsi: define dummy handle_output for vhost-scsi vqsMing Lei
vhost userspace needn't to handle vq's notification from guest, so define dummy handle_output callback for all vqs of vhost-scsi. In some corner cases(such as when handling vq's reset from VM), virtio-pci still trys to handle pending virtio-scsi events, then object check failure inside virtio_scsi_handle_event() for vhost-scsi can be triggered. The issue can be reproduced by 'rmmod virtio-scsi', 'system sleep' or reboot inside VM. Cc: qemu-stable@nongnu.org Cc: Anthony Liguori <aliguori@amazon.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-06-18pc: create custom generic PC machine typeIgor Mammedov
it will be used for PC specific options/variables Signed-off-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-18hw/mips: Add API to convert KVM guest KSEG0 <-> GPASanjay Lal
Add API for converting physical addresses to KVM guest KSEG0 addresses, and fix the existing API for converting KSEG0 addresses to physical addresses to work in the KVM case. Both have the same sized KSEG0, so it's just a case of fixing the mask. In KVM trap and emulate mode both the guest kernel and guest userspace execute in useg: Guest User address space: 0x00000000..0x3fffffff Guest Kernel Unmapped: 0x40000000..0x5fffffff Guest Kernel Mapped: 0x60000000..0x7fffffff Signed-off-by: Sanjay Lal <sanjayl@kymasys.com> Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-06-18virtio-scsi: add support for the any_layout featurePaolo Bonzini
Store the request and response headers by value, and let virtio_scsi_parse_req check that there is only one of datain and dataout. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-06-16spapr_pci: Advertise MSI quotaBadari Pulavarty
Hotplug of multiple disks fails due to MSI vector quota check. Number of MSI vectors default to 8 allowing only 4 devices. This happens on RHEL6.5 guest. RHEL7 and SLES11 guests fallback to INTX. One way to workaround the issue is to increase total MSIs, so that MSI quota check allows us to hotplug multiple disks. This sets the quota to the maximum number of interupts XICS has which is 1024 now (XICS_IRQS). This moves XICS_IRQS from spapr.c to xics.h for wider visibility. Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com> [aik: put XICS_IRQS=1024 instead of 64i, fixed endianness and size] Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16spapr_hcall: Add address-translation-mode-on-interrupt resource in H_SET_MODEAlexey Kardashevskiy
This adds handling of the RESOURCE_ADDR_TRANS_MODE resource from the H_SET_MODE, for POWER8 (PowerISA 2.07) only. This defines AIL flags for LPCR special register. This changes @excp_prefix according to the mode, takes effect in TCG. This turns support of a new capability PPC2_ISA207S flag for TCG. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16spapr_iommu: Introduce bus_offset in sPAPRTCETableAlexey Kardashevskiy
This adds @bus_offset into sPAPRTCETable to tell where TCE table starts from. It is set to 0 for emulated devices. Dynamic DMA windows will use other offset. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16spapr_iommu: Introduce page_shift in sPAPRTCETableAlexey Kardashevskiy
At the moment only 4K pages are supported by sPAPRTCETable. Since sPAPR spec allows other page sizes and we are going to implement them, we need page size to be configrable. This adds @page_shift into sPAPRTCETable and replaces SPAPR_TCE_PAGE_SHIFT with it where it is possible. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16spapr_iommu: Get rid of window_size in sPAPRTCETableAlexey Kardashevskiy
This removes window_size as it is basically a copy of nb_table shifted by SPAPR_TCE_PAGE_SHIFT. As new dynamic DMA windows are going to support windows as big as the entire RAM and this number will be bigger that 32 capacity, we will have to do something about @window_size anyway and removal seems to be the right way to go. This removes dma_window_start/dma_window_size from sPAPRPHBState as they are no longer used. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16spapr_pci: Allow multiple TCE tables per PHBAlexey Kardashevskiy
At the moment sPAPRPHBState contains a @tcet pointer to the only TCE table. However sPAPR spec allows having more than one DMA window. Since the TCE object is already a child of SPAPR PHB object, there is no need to keep an additional pointer to it in sPAPRPHBState so remove it. This changes the way sPAPRPHBState::reset performs reset of sPAPRTCETable objects. This changes the default DMA window properties calculation. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16spapr_pci: spapr_iommu: Make DMA window a subregionAlexey Kardashevskiy
Currently the default DMA window is represented by a single MemoryRegion. However there can be more than just one window so we need a "root" memory region to be separated from the actual DMA window(s). This introduces a "root" IOMMU memory region and adds a subregion for the default DMA 32bit window. Following patches will add other subregion(s). This initializes a default DMA window subregion size to the guest RAM size as this window can be switched into "bypass" mode which implements direct DMA mapping. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16spapr_pci: Introduce a finish_realize() callbackAlexey Kardashevskiy
The spapr-pci PHB initializes IOMMU for emulated devices only. The upcoming VFIO support will do it different. However both emulated and VFIO PHB types share most of the initialization code. For the type specific things a new finish_realize() callback is introduced. This introduces sPAPRPHBClass derived from PCIHostBridgeClass and adds the callback pointer. This implements finish_realize() for emulated devices. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [agraf: Fix compilation] Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16macio ide: Do remainder access asynchronouslyAlexander Graf
The macio IDE controller has some pretty nasty magic in its implementation to allow for unaligned sector accesses. We used to handle these accesses synchronously inside the IO callback handler. However, the block infrastructure changed below our feet and now it's impossible to call a synchronous block read/write from the aio callback handler of a previous block access. Work around that limitation by making the unaligned handling bits also go through our asynchronous handler. This fixes booting Mac OS X for me. Reported-by: John Arbuckle <programmingkidx@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16spapr: Add ibm, client-architecture-support callAlexey Kardashevskiy
The PAPR+ specification defines a ibm,client-architecture-support (CAS) RTAS call which purpose is to provide a negotiation mechanism for the guest and the hypervisor to work out the best compatibility parameters. During the negotiation process, the guest provides an array of various options and capabilities which it supports, the hypervisor adjusts the device tree and (optionally) reboots the guest. At the moment the Linux guest calls CAS method at early boot so SLOF gets called. SLOF allocates a memory buffer for the device tree changes and calls a custom KVMPPC_H_CAS hypercall. QEMU parses the options, composes a diff for the device tree, copies it to the buffer provided by SLOF and returns to SLOF. SLOF updates the device tree and returns control to the guest kernel. Only then the Linux guest parses the device tree so it is possible to avoid unnecessary reboot in most cases. The device tree diff is a header with an update format version (defined as 1 in this patch) followed by a device tree with the properties which require update. If QEMU detects that it has to reboot the guest, it silently does so as the guest expects reboot to happen because this is usual pHyp firmware behavior. This defines custom KVMPPC_H_CAS hypercall. The current SLOF already has support for it. This implements stub which returns very basic tree (root node, no properties) to the guest. As the return buffer does not contain any change, no change in behavior is expected. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16spapr: Add support for time base offset migrationAlexey Kardashevskiy
This allows guests to have a different timebase origin from the host. This is needed for migration, where a guest can migrate from one host to another and the two hosts might have a different timebase origin. However, the timebase seen by the guest must not go backwards, and should go forwards only by a small amount corresponding to the time taken for the migration. This is only supported for recent POWER hardware which has the TBU40 (timebase upper 40 bits) register. That includes POWER6, 7, 8 but not 970. This adds kvm_access_one_reg() to access a special register which is not in env->spr. This requires kvm_set_one_reg/kvm_get_one_reg patch. The feature must be present in the host kernel. This bumps vmstate_spapr::version_id and enables new vmstate_ppc_timebase only for it. Since the vmstate_spapr::minimum_version_id remains unchanged, migration from older QEMU is supported but without vmstate_ppc_timebase. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16mac99: Added FW_CFG_PPC_BUSFREQ to match CLOCKFREQ and TBFREQ already thereBALATON Zoltan
While there, also moved the hard coded value for CLOCKFREQ to a #define. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-09Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into ↵Peter Maydell
staging Block pull request # gpg: Signature made Fri 06 Jun 2014 17:08:50 BST using RSA key ID 81AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" * remotes/stefanha/tags/block-pull-request: (42 commits) qapi: Extract qapi/block.json definitions qapi: Extract qapi/block-core.json definitions qapi: create two block related json modules qapi: Extract qapi/common.json definitions sheepdog: reload only header in a case of live snapshot sheepdog: fix vdi object update after live snapshot rbd: Fix leaks in rbd_start_aio() error path qemu-img: Document check exit codes block: fix wrong order in live block migration setup blockdev: acquire AioContext in block_set_io_throttle throttle: add detach/attach test case throttle: add throttle_detach/attach_aio_context() dataplane: Support VIRTIO_BLK_T_SCSI_CMD virtio-blk: Factor out virtio_blk_handle_scsi_req from virtio_blk_handle_scsi virtio-blk: Allow config-wce in dataplane block: Move declaration of bdrv_get_aio_context to block.h raw-posix: drop raw_get_aio_fd() since it is no longer used dataplane: implement async flush dataplane: delete IOQueue since it is no longer used dataplane: use the QEMU block layer for I/O ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-05Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
pc,pci,virtio,qdev fixes, tests new tests for SMBIOS SMBIOS fixes pc, pci fixes qdev patches stayed on list for a month with no review, as I told people on KVM forum I'm merging stuch patches if they look fine. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> * remotes/mst/tags/for_upstream: qdev: Add test of qdev_prop_check_global qdev: Display warning about unused -global tests: add smbios testing tests: rename acpi-test to bios-tables-test virtio-balloon: return empty data when no stats are available pcie_host: Turn pcie_host_init() into an instance_init SMBIOS: Fix type 17 field sizes SMBIOS: Update Type 0 struct generator for machines >= 2.1 SMBIOS: Fix endian-ness when populating multi-byte fields serial-pci: Set prog interface field of pci config to 16550 compatible Conflicts: include/hw/i386/pc.h [PMM: fixed trivial conflict in pc.h] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-05qdev: Display warning about unused -globalDon Slutz
This can help a user understand why -global was ignored. For example: with "-vga cirrus"; "-global vga.vgamem_mb=16" is just ignored when "-global cirrus-vga.vgamem_mb=16" is not. This is currently clear when the wrong property is provided: out/x86_64-softmmu/qemu-system-x86_64 -global cirrus-vga.vram_size_mb=16 -monitor pty -vga cirrus char device redirected to /dev/pts/20 (label compat_monitor0) qemu-system-x86_64: Property '.vram_size_mb' not found Aborted (core dumped) vs out/x86_64-softmmu/qemu-system-x86_64 -global vga.vram_size_mb=16 -monitor pty -vga cirrus char device redirected to /dev/pts/20 (label compat_monitor0) VNC server running on `::1:5900' ^Cqemu: terminating on signal 2 Signed-off-by: Don Slutz <dslutz@verizon.com> Acked-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-04virtio-blk: Factor out virtio_blk_handle_scsi_req from virtio_blk_handle_scsiFam Zheng
The common logic to process a scsi request in a VirtQueueElement is extracted to a function to share with dataplane. This makes VirtIOBlockReq.scsi unused, so drop it. Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-02xhci: order superspeed ports firstGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-06-02usb: add usb_pick_speedGerd Hoffmann
We can pick the usb port speed in generic code, by looking at the port and device speed masks and looking for the fastest match. So add a function to do exactly that, and drop the speed setting code from usb_desc_attach as it isn't needed any more. This way we can set the device speed before calling port->ops->attach, which fixes some xhci hotplug issues. https://bugzilla.redhat.com/show_bug.cgi?id=1046873 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-06-02usb: move ehci register defines to header fileGerd Hoffmann
So we can easily use them in tests. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-06-02usb: add uhci port status reserved bitGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-06-02usb: move uhci register defines to header fileGerd Hoffmann
So we can easily use them in tests. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-05-28ssi: Name the CS GPIOPeter Crosthwaite
To get it out of the default GPIO list. This allows child devices to use the un-named GPIO namespace without having to be SSI aware. That is, there is no more need for machines to know about the obscure policy where GPIO 0 is the SSI chip-select and GPIO 1..N are the concrete class GPIOs (defined locally as 0..N-1). This is most notable in stellaris, which uses a device which has both SSI and concrete level GPIOs. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-05-28qdev: Implement named GPIOsPeter Crosthwaite
Implement named GPIOs on the Device layer. Listifies the existing GPIOs stuff using string keys. Legacy un-named GPIOs are preserved by using a NULL name string - they are just a single matchable element in the name list. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-05-28machine: Make -machine opts properties of MachineStateMarcel Apfelbaum
Make machine's QemuOpts QOM properties of /machine. The properties are automatically filled in. This opens the possibility to create opts per machine rather than global. Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-05-28machine: Conversion of QEMUMachineInitArgs to MachineStateMarcel Apfelbaum
Total removal of QEMUMachineInitArgs struct. QEMUMachineInitArgs's fields are copied into MachineState. Removed duplicated fields from MachineState. All the other changes are only mechanical refactoring, no semantic changes. Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> (s390) Reviewed-by: Michael S. Tsirkin <mst@redhat.com> (PC) [AF: Renamed ms -> machine, use MACHINE_GET_CLASS()] Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-05-26input: switch hid mouse and tablet to the new input layer api.Gerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-05-26input: switch hid keyboard to new input layer api.Gerd Hoffmann
Minimal patch to get the switchover done. We continue processing ps/2 scancodes for now as they are part of the live migration stream. Fixing that, then mapping directly from QKeyValue to HID keycodes is left as excercise for another day. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-05-21pcie_host: Turn pcie_host_init() into an instance_initAndreas Färber
This assures the trivial field initialization is applied for any derived type - currently only Q35PCIHost. Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-05-21SMBIOS: Fix type 17 field sizesGabriel L. Somlo
Fields for configured_clock_speed and various voltage values introduced in spec v2.7+ should be "word", i.e. 16 bits. Reported-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Gabriel Somlo <somlo@cmu.edu> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-05-21SMBIOS: Update Type 0 struct generator for machines >= 2.1Gabriel L. Somlo
Update how type 0 (bios info) structures are generated, as follows: - convert bios_characteristics field to uin64_t (instead of uint8_t[8]), as described in the current smbios spec (v2.8) - enable "virtual machine" bit in bios_characteristics_extension_bits - add command line option to enable "uefi supported" bit in bios_characteristics_extension_bits These updates should make this optional structure more useful when used with edk2/ovmf. Only pc machines >= 2.1 are affected, and only when a type 0 structure is explicitly specified on the command line. Signed-off-by: Gabriel Somlo <somlo@cmu.edu> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-05-21serial-pci: Set prog interface field of pci config to 16550 compatibleBALATON Zoltan
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
2014-05-20s390x/virtio-ccw: wire up irq routing and irqfdsCornelia Huck
Make use of the new s390 adapter irq routing support to enable real in-kernel irqfds for virtio-ccw with adapter interrupts. Note that s390 doesn't provide the common KVM_CAP_IRQCHIP capability, but rather needs KVM_CAP_S390_IRQCHIP to be enabled. This is to ensure backward compatibility. Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-05-20s390x: add I/O adapter registrationCornelia Huck
Register an I/O adapter interrupt source for when virtio-ccw devices start using adapter interrupts. Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-05-20s390x: split flic into kvm and non-kvm partsCornelia Huck
Introduce a common parent class for both cases, where kvm and non-kvm can hook up callbacks. This will be used by follow-on patches for adapter registration and mapping. We now always have a flic, regardless of whether we use kvm; the non-kvm implementation just doesn't do anything. Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-05-08pci: add Error-propagating pci_add_capability2()Laszlo Ersek
... and rebase pci_add_capability() to it. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-05-07Merge remote-tracking branch 'remotes/sstabellini/xen-140507-2' into stagingPeter Maydell
* remotes/sstabellini/xen-140507-2: xen_disk: add discard support pass an inclusive address range to xc_domain_pin_memory_cacheattr xen: factor out common functions xen: move Xen HVM files under hw/i386/xen xen: move Xen PV machine files to hw/xenpv qemu-xen: free all the pirqs for msi/msix when driver unload exec: Limit translation limiting in address_space_translate to xen Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-05-07xen_disk: add discard supportOlaf Hering
Implement discard support for xen_disk. It makes use of the existing discard code in qemu. The discard support is enabled unconditionally. The tool stack may provide a property "discard-enable" in the backend node to optionally disable discard support. This is helpful in case the backing file was intentionally created non-sparse to avoid fragmentation. Signed-off-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-16 21:29:40 +0000