aboutsummaryrefslogtreecommitdiff
path: root/include/hw
AgeCommit message (Collapse)Author
2017-10-16include/hw/or-irq.h: Drop unused in_irqs fieldPeter Maydell
The struct OrIRQState has an unused member field in_irqs. This is a legacy of earlier versions of the patch; the code that used it was dropped from the final version of the code that went into master, but we forgot to delete the no-longer-used struct field. Do so now. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-10-15pci: conventional-pci-device and pci-express-device interfacesEduardo Habkost
Those two interfaces will be used to indicate which device types support Conventional PCI or PCI Express buses. Management software will be able to use the qom-list-types QMP command to query that information. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-10-15hw/misc: add vmcoreinfo deviceMarc-André Lureau
See docs/specs/vmcoreinfo.txt for details. "etc/vmcoreinfo" fw_cfg entry is added when using "-device vmcoreinfo". Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-10-15fw_cfg: add write callbackMarc-André Lureau
Reintroduce the write callback that was removed when write support was removed in commit 023e3148567ac898c7258138f8e86c3c2bb40d07. Contrary to the previous callback implementation, the write_cb callback is called whenever a write happened, so handlers must be ready to handle partial write as necessary. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-10-12arm: fix armv7m_init() declaration to match definitionIgor Mammedov
s/cpu_model/cpu_type/ that has been forgotten during conversion (ba1ba5cc), while touching the line also fixup alignment. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-id: 1507710805-221721-1-git-send-email-imammedo@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-10-12ide: support reporting of rotation rateDaniel P. Berrange
The Linux kernel will query the ATA IDENTITY DEVICE data, word 217 to determine the rotations per minute of the disk. If this has the value 1, it is taken to be an SSD and so Linux sets the 'rotational' flag to 0 for the I/O queue and will stop using that disk as a source of random entropy. Other operating systems may also take into account rotation rate when setting up default behaviour. Mgmt apps should be able to set the rotation rate for virtualized block devices, based on characteristics of the host storage in use, so that the guest OS gets sensible behaviour out of the box. This patch thus adds a 'rotation-rate' parameter for 'ide-hd' device types. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <20171004114008.14849-3-berrange@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-10-09machine: Add a valid_cpu_types propertyAlistair Francis
This patch add a MachineClass element that can be set in the machine C code to specify a list of supported CPU types. If the supported CPU types are specified the user enter CPU (by -cpu at runtime) is checked against the supported types and QEMU exits if they aren't supported. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Message-Id: <b8474e9d2e0a219d9bac901342f983b13d009301.1507059418.git.alistair.francis@xilinx.com> [ehabkost: removed assert(), rewrote comment] Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-10-06s390x/3270: IDA support for 3270 via CcwDataStreamHalil Pasic
Let us convert the 3270 code so it uses the recently introduced CcwDataStream abstraction instead of blindly assuming direct data access. This patch does not change behavior beyond introducing IDA support: for direct data access CCWs everything stays as-is. (If there are bugs, they are also preserved). Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com> Message-Id: <20170920172314.102710-2-pasic@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-06390x/css: introduce maximum data address checkingHalil Pasic
The architecture mandates the addresses to be accessed on the first indirection level (that is, the data addresses without IDA, and the (M)IDAW addresses with (M)IDA) to be checked against an CCW format dependent limit maximum address. If a violation is detected, the storage access is not to be performed and a channel program check needs to be generated. As of today, we fail to do this check. Let us stick even closer to the architecture specification. Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com> Message-Id: <20170921180841.24490-5-pasic@linux.vnet.ibm.com> Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com> Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-06s390x/css: introduce css data streamHalil Pasic
This is a preparation for introducing handling for indirect data addressing and modified indirect data addressing (CCW). Here we introduce an interface which should make the addressing scheme transparent for the client code. Here we implement only the basic scheme (no IDA or MIDA). Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com> Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com> Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com> Message-Id: <20170921180841.24490-2-pasic@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-09-29virtio-input: send rel-wheel events for wheel buttonsGerd Hoffmann
qemu uses wheel-up/down button events for mouse wheel input, however linux applications typically want REL_WHEEL events. This fixes wheel with linux guests. Tested with X11/wayland, and windows virtio-input driver. Based on a patch from Marc. Added property to enable/disable wheel axis. Cc: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20170926113243.26081-1-kraxel@redhat.com
2017-09-27Merge remote-tracking branch ↵Peter Maydell
'remotes/dgilbert/tags/pull-migration-20170927a' into staging Migration pull 2017-09-27 # gpg: Signature made Wed 27 Sep 2017 14:56:23 BST # gpg: using RSA key 0x0516331EBC5BFDE7 # gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7 * remotes/dgilbert/tags/pull-migration-20170927a: migration: Route more error paths migration: Route errors up through vmstate_save migration: wire vmstate_save_state errors up to vmstate_subsection_save migration: Check field save returns migration: check pre_save return in vmstate_save_state migration: pre_save return int migration: disable auto-converge during bulk block migration Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-09-27migration: Route more error pathsDr. David Alan Gilbert
vmstate_save_state is called in lots of places. Route error returns from the easier cases back up; there are lots of more complex cases where their own error paths need fixing. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20170925112917.21340-7-dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Commit message fix up as Peter's review
2017-09-27mac_dbdma: remove DBDMA_init() functionMark Cave-Ayland
Instead we can now instantiate the MAC_DBDMA object directly within the macio device. We also add the DBDMA device as a child property so that it is possible to retrieve later. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-09-27mac_dbdma: QOMifyMark Cave-Ayland
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-09-27mac_dbdma: remove unused IO fields from DBDMAStateMark Cave-Ayland
These fields were used to manually handle IO requests that weren't aligned to a sector boundary before this feature was supported by the block API. Once the block API changed to support byte-aligned IO requests, the macio controller was switched over to use it in commit be1e343 but these fields were accidentally left behind. Remove them, including the initialisation in DBDMA_init(). Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-09-27ppc/pnv: Improve macro parenthesizationEric Blake
Although none of the existing macro call-sites were broken, it's always better to write macros that properly parenthesize arguments that can be complex expressions, so that the intended order of operations is not broken. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-09-27ppc: Fix OpenPIC modelBenjamin Herrenschmidt
Apple uses an IBM MPIC2A without timers, it has 64 sources. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-09-23Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
* Speed up AddressSpaceDispatch creation (Alexey) * Fix kvm.c assert (David) * Memory fixes and further speedup (me) * Persistent reservation manager infrastructure (me) * virtio-serial: add enable_backend callback (Pavel) * chardev GMainContext fixes (Peter) # gpg: Signature made Fri 22 Sep 2017 20:07:33 BST # gpg: using RSA key 0xBFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (32 commits) chardev: remove context in chr_update_read_handler chardev: use per-dev context for io_add_watch_poll chardev: add Chardev.gcontext field chardev: new qemu_chr_be_update_read_handlers() scsi: add persistent reservation manager using qemu-pr-helper scsi: add multipath support to qemu-pr-helper scsi: build qemu-pr-helper scsi, file-posix: add support for persistent reservation management memory: Share special empty FlatView memory: seek FlatView sharing candidates among children subregions memory: trace FlatView creation and destruction memory: Create FlatView directly memory: Get rid of address_space_init_shareable memory: Rework "info mtree" to print flat views and dispatch trees memory: Do not allocate FlatView in address_space_init memory: Share FlatView's and dispatch trees between address spaces memory: Move address_space_update_ioeventfds memory: Alloc dispatch tree where topology is generared memory: Store physical root MR in FlatView memory: Rename mem_begin/mem_commit/mem_add helpers ... # Conflicts: # configure
2017-09-22ide: fix enum comparison for gcc 4.7John Snow
Apparently GCC gets bent over comparing enum values against zero. Replace the conditional with something less readable. Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 20170921013821.1673-1-jsnow@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-09-22memory: Get rid of address_space_init_shareableAlexey Kardashevskiy
Since FlatViews are shared now and ASes not, this gets rid of address_space_init_shareable(). This should cause no behavioural change. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Message-Id: <20170921085110.25598-17-aik@ozlabs.ru> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-21msf2: Add Smartfusion2 SoCSubbaraya Sundeep
Smartfusion2 SoC has hardened Microcontroller subsystem and flash based FPGA fabric. This patch adds support for Microcontroller subsystem in the SoC. Signed-off-by: Subbaraya Sundeep <sundeep.lkml@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20170920201737.25723-5-f4bug@amsat.org [PMD: drop cpu_model to directly use cpu type, check m3clk non null] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-09-21msf2: Add Smartfusion2 SPI controllerSubbaraya Sundeep
Modelled Microsemi's Smartfusion2 SPI controller. Signed-off-by: Subbaraya Sundeep <sundeep.lkml@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20170920201737.25723-4-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-09-21msf2: Microsemi Smartfusion2 System Register blockSubbaraya Sundeep
Added Sytem register block of Smartfusion2. This block has PLL registers which are accessed by guest. Signed-off-by: Subbaraya Sundeep <sundeep.lkml@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Acked-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20170920201737.25723-3-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-09-21msf2: Add Smartfusion2 System timerSubbaraya Sundeep
Modelled System Timer in Microsemi's Smartfusion2 Soc. Timer has two 32bit down counters and two interrupts. Signed-off-by: Subbaraya Sundeep <sundeep.lkml@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Acked-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20170920201737.25723-2-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-09-21nvic: Implement NVIC_ITNS<n> registersPeter Maydell
For v8M, the NVIC has a new set of registers per interrupt, NVIC_ITNS<n>. These determine whether the interrupt targets Secure or Non-secure state. Implement the register read/write code for these, and make them cause NVIC_IABR, NVIC_ICER, NVIC_ISER, NVIC_ICPR, NVIC_IPR and NVIC_ISPR to RAZ/WI for non-secure accesses to fields corresponding to interrupts which are configured to target secure state. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1505240046-11454-8-git-send-email-peter.maydell@linaro.org
2017-09-21nvic: Implement AIRCR changes for v8MPeter Maydell
The Application Interrupt and Reset Control Register has some changes for v8M: * new bits SYSRESETREQS, BFHFNMINS and PRIS: these all have real state if the security extension is implemented and otherwise are constant * the PRIGROUP field is banked between security states * non-secure code can be blocked from using the SYSRESET bit to reset the system if SYSRESETREQS is set Implement the new state and the changes to register read and write. For the moment we ignore the effects of the secure PRIGROUP. We will implement the effects of PRIS and BFHFNMIS later. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1505240046-11454-6-git-send-email-peter.maydell@linaro.org
2017-09-21nvic: Add cached vectpending_prio statePeter Maydell
Instead of looking up the pending priority in nvic_pending_prio(), cache it in a new state struct field. The calculation of the pending priority given the interrupt number is more complicated in v8M with the security extension, so the caching will be worthwhile. This changes nvic_pending_prio() from returning a full (group + subpriority) priority value to returning a group priority. This doesn't require changes to its callsites because we use it only in comparisons of the form execution_prio > nvic_pending_prio() and execution priority is always a group priority, so a test (exec prio > full prio) is true if and only if (execprio > group_prio). (Architecturally the expected comparison is with the group priority for this sort of "would we preempt" test; we were only doing a test with a full priority as an optimisation to avoid the mask, which is possible precisely because the two comparisons always give the same answer.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1505240046-11454-5-git-send-email-peter.maydell@linaro.org
2017-09-21nvic: Add cached vectpending_is_s_banked statePeter Maydell
With banked exceptions, just the exception number in s->vectpending is no longer sufficient to uniquely identify the pending exception. Add a vectpending_is_s_banked bool which is true if the exception is using the sec_vectors[] array. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1505240046-11454-4-git-send-email-peter.maydell@linaro.org
2017-09-21nvic: Add banked exception statesPeter Maydell
For the v8M security extension, some exceptions must be banked between security states. Add the new vecinfo array which holds the state for the banked exceptions and migrate it if the CPU the NVIC is attached to implements the security extension. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2017-09-21virtio-serial: add enable_backend callbackPavel Butsykin
We should guarantee that RAM will not be modified while VM has a stopped state, otherwise it can lead to negative consequences during post-copy migration. In RUN_STATE_FINISH_MIGRATE step, it's expected that RAM on source side will not be modified as this could lead to non-consistent vm state on the destination side. Also RAM access during postcopy-ram migration with enabled release-ram capability can lead to sad consequences. Let's add enable_backend() callback to avoid undesirable virtioqueue changes in the guest memory. Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com> Message-Id: <20170919120733.22020-1-pbutsykin@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-21net: add Sun HME (Happy Meal Ethernet) on-board NICMark Cave-Ayland
Enable it by default for the sparc64-softmmu configuration. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Artyom Tarasenko <atar4qemu@gmail.com>
2017-09-20Merge remote-tracking branch ↵Peter Maydell
'remotes/ehabkost/tags/machine-next-pull-request' into staging Machine/CPU/NUMA queue, 2017-09-19 # gpg: Signature made Tue 19 Sep 2017 21:17:01 BST # gpg: using RSA key 0x2807936F984DC5A6 # gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" # Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6 * remotes/ehabkost/tags/machine-next-pull-request: MAINTAINERS: Update git URLs for my trees hw/acpi-build: Fix SRAT memory building in case of node 0 without RAM NUMA: Replace MAX_NODES with nb_numa_nodes in for loop numa: cpu: calculate/set default node-ids after all -numa CLI options are parsed arm: drop intermediate cpu_model -> cpu type parsing and use cpu type directly pc: use generic cpu_model parsing vl.c: convert cpu_model to cpu type and set of global properties before machine_init() cpu: make cpu_generic_init() abort QEMU on error qom: cpus: split cpu_generic_init() on feature parsing and cpu creation parts hostmem-file: Add "discard-data" option osdep: Define QEMU_MADV_REMOVE vl: Clean up user-creatable objects when exiting Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-09-19numa: cpu: calculate/set default node-ids after all -numa CLI options are parsedIgor Mammedov
Calculating default node-ids for CPUs in possible_cpu_arch_ids() is rather fragile since defaults calculation uses nb_numa_nodes but callback might be potentially called early before all -numa CLI options are parsed, which would lead to cpus assigned only upto nb_numa_nodes at the time possible_cpu_arch_ids() is called. Issue was introduced by (7c88e65 numa: mirror cpu to node mapping in MachineState::possible_cpus) and for example CLI: -smp 4 -numa node,cpus=0 -numa node would set props.node-id in possible_cpus array for every non explicitly mapped CPU to the first node. Issue is not visible to guest nor to mgmt interface due to 1) implictly mapped cpus are forced to the first node in case of partial mapping 2) in case of default mapping possible_cpu_arch_ids() is called after all -numa options are parsed (resulting in correct mapping). However it's fragile to rely on late execution of possible_cpu_arch_ids(), therefore add machine specific callback that returns node-id for CPU and use it to calculate/ set defaults at machine_numa_finish_init() time when all -numa options are parsed. Reported-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <1496314408-163972-1-git-send-email-imammedo@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-09-19s390x: move sclp_service_call() to sclp.hDavid Hildenbrand
Implemented in sclp.c, so let's move it to the right include file. Also adjust some includes. Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20170913132417.24384-9-david@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-09-19s390x: move subsystem_reset() to s390-virtio-ccw.hDavid Hildenbrand
Implemented in s390-virtio-ccw.c, so move it to the right header. We can also drop the extern. Fix up one include. Reviewed-by: Thomas Huth <thuth@redhat.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20170913132417.24384-7-david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-09-19i386/cpu/hyperv: support over 64 vcpus for windows guestsGonglei
Starting with Windows Server 2012 and Windows 8, if CPUID.40000005.EAX contains a value of -1, Windows assumes specific limit to the number of VPs. In this case, Windows Server 2012 guest VMs may use more than 64 VPs, up to the maximum supported number of processors applicable to the specific Windows version being used. https://docs.microsoft.com/en-us/virtualization/hyper-v-on-windows/reference/tlfs For compatibility, Let's introduce a new property for X86CPU, named "x-hv-max-vps" as Eduardo's suggestion, and set it to 0x40 before machine 2.10. (The "x-" prefix indicates that the property is not supposed to be a stable user interface.) Signed-off-by: Gonglei <arei.gonglei@huawei.com> Message-Id: <1505143227-14324-1-git-send-email-arei.gonglei@huawei.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-19arm: drop intermediate cpu_model -> cpu type parsing and use cpu type directlyIgor Mammedov
there are 2 use cases to deal with: 1: fixed CPU models per board/soc 2: boards with user configurable cpu_model and fallback to default cpu_model if user hasn't specified one explicitly For the 1st drop intermediate cpu_model parsing and use const cpu type directly, which replaces: typename = object_class_get_name( cpu_class_by_name(TYPE_ARM_CPU, cpu_model)) object_new(typename) with object_new(FOO_CPU_TYPE_NAME) or cpu_generic_init(BASE_CPU_TYPE, "my cpu model") with cpu_create(FOO_CPU_TYPE_NAME) as result 1st use case doesn't have to invoke not necessary translation and not needed code is removed. For the 2nd 1: set default cpu type with MachineClass::default_cpu_type and 2: use generic cpu_model parsing that done before machine_init() is run and: 2.1: drop custom cpu_model parsing where pattern is: typename = object_class_get_name( cpu_class_by_name(TYPE_ARM_CPU, cpu_model)) [parse_features(typename, cpu_model, &err) ] 2.2: or replace cpu_generic_init() which does what 2.1 does + create_cpu(typename) with just create_cpu(machine->cpu_type) as result cpu_name -> cpu_type translation is done using generic machine code one including parsing optional features if supported/present (removes a bunch of duplicated cpu_model parsing code) and default cpu type is defined in an uniform way within machine_class_init callbacks instead of adhoc places in boadr's machine_init code. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <1505318697-77161-6-git-send-email-imammedo@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-09-19vl.c: convert cpu_model to cpu type and set of global properties before ↵Igor Mammedov
machine_init() All machines that support user specified cpu_model either call cpu_generic_init() or cpu_class_by_name()/CPUClass::parse_features to parse feature string and to get CPU type to create. Which leads to code duplication and hard-codding default CPU model within machine_foo_init() code. Which makes it impossible to get CPU type before machine_init() is run. So instead of setting default CPUs models and doing parsing in target specific machine_foo_init() in various ways, provide a generic data driven cpu_model parsing before machine_init() is called. in follow up per target patches, it will allow to: * define default CPU type in consistent/generic manner per machine type and drop custom code that fallbacks to default if cpu_model is NULL * drop custom features parsing in targets and do it in centralized way. * for cases of cpu_generic_init(TYPE_BASE/DEFAULT_CPU, "some_cpu") replace it with cpu_create(machine->cpu_type) || cpu_create(TYPE_FOO) depending if CPU type is user settable or not. not doing useless parsing and clearly documenting where CPU model is user settable or fixed one. Patch allows machine subclasses to define default CPU type per machine class at class_init() time and if that is set generic code will parse cpu_model into a MachineState::cpu_type which will be used to create CPUs for that machine instance and allows gradual per board conversion. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <1505318697-77161-4-git-send-email-imammedo@redhat.com> Acked-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-09-19scsi: move block/scsi.h to include/scsi/constants.hPaolo Bonzini
Complete the transition by renaming this header, which was shared by block/iscsi.c and the SCSI emulation code. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-19scsi: move non-emulation specific code to scsi/Paolo Bonzini
util/scsi.c includes some SCSI code that is shared by block/iscsi.c and hw/scsi, but the introduction of the persistent reservation helper will add many more instances of this. There is also include/block/scsi.h, which actually is not part of the core block layer. The persistent reservation manager will also need a home. A scsi/ directory provides one for both the aforementioned shared code and the PR manager code. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-19scsi: rename scsi_build_sense to scsi_convert_sensePaolo Bonzini
After introducing the scsi/ subdirectory, there will be a scsi_build_sense function that is the same as scsi_req_build_sense but without needing a SCSIRequest. The existing scsi_build_sense function gets in the way, remove it. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-19virtio-scsi: Add virtqueue_size parameter allowing virtqueue size to be set.Richard W.M. Jones
Since Linux switched to blk-mq as the default in Linux commit 5c279bd9e406 ("scsi: default to scsi-mq"), virtio-scsi LUNs consume about 10x as much guest kernel memory. This commit allows you to choose the virtqueue size for each virtio-scsi-pci controller like this: -device virtio-scsi-pci,id=scsi,virtqueue_size=16 The default is still 128 as before. Using smaller virtqueue_size allows many more disks to be added to small memory virtual machines. For a 1 vCPU, 500 MB, no swap VM I observed: With scsi-mq enabled (upstream kernel): 175 disks -"- ditto -"- virtqueue_size=64: 318 disks -"- ditto -"- virtqueue_size=16: 775 disks With scsi-mq disabled (kernel before 5c279bd9e406): 1755 disks Note that to have any effect, this requires a kernel patch: https://lkml.org/lkml/2017/8/10/689 Signed-off-by: Richard W.M. Jones <rjones@redhat.com> Message-Id: <20170810165255.20865-1-rjones@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-18hw/ide: Convert DeviceClass init to realizeMao Zhongyi
Replace init with realize in IDEDeviceClass, which has errp as a parameter. So all the implementations now use error_setg instead of error_report for reporting error. Cc: John Snow <jsnow@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Max Reitz <mreitz@redhat.com> Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com> Reviewed-by: John Snow <jsnow@redhat.com> Message-id: c4d27b4b5d9e37468e63e35214ce4833ca271542.1505737465.git.maozy.fnst@cn.fujitsu.com Signed-off-by: John Snow <jsnow@redhat.com>
2017-09-18IDE: replace DEBUG_AIO with trace eventsJohn Snow
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20170901001502.29915-6-jsnow@redhat.com [Edited enum conditional for Clang --js] Signed-off-by: John Snow <jsnow@redhat.com>
2017-09-18ATAPI: Replace DEBUG_IDE_ATAPI with tracing eventsJohn Snow
As part of the ongoing effort to modernize the tracing facilities for the IDE family of devices, remove PRINTFs in the ATAPI device with actual tracing events. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20170901001502.29915-5-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2017-09-18IDE: replace DEBUG_IDE with tracing systemJohn Snow
Remove the DEBUG_IDE preprocessor definition with something more appropriately flexible, using the trace-events subsystem. This will be less prone to bitrot and will more effectively allow us to target just the functions we care about. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 20170901001502.29915-2-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2017-09-15Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.11-20170915' ↵Peter Maydell
into staging ppc patch queue 2017-09-15 Here's the current batch of accumulated ppc patches. These are all pretty simple bugfixes or cleanups, no big new features here. # gpg: Signature made Fri 15 Sep 2017 04:50:00 BST # gpg: using RSA key 0x6C38CACA20D9B392 # gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" # gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" # gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" # gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" # Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392 * remotes/dgibson/tags/ppc-for-2.11-20170915: ppc/kvm: use kvm_vm_check_extension() in kvmppc_is_pr() spapr_events: use QTAILQ_FOREACH_SAFE() in spapr_clear_pending_events() spapr_cpu_core: cleaning up qdev_get_machine() calls spapr_pci: don't create 64-bit MMIO window if we don't need to spapr_pci: convert sprintf() to g_strdup_printf() spapr_cpu_core: fail gracefully with non-pseries machine types xics: fix several error leaks vfio, spapr: Fix levels calculation spapr_pci: handle FDT creation errors with _FDT() spapr_pci: use the common _FDT() helper spapr: fix CAS-generated reset ppc/xive: fix OV5_XIVE_EXPLOIT bits spapr: only update SDR1 once per-cpu during CAS spapr_pci: use g_strdup_printf() spapr_pci: drop useless check in spapr_populate_pci_child_dt() spapr_pci: drop useless check in spapr_phb_vfio_get_loc_code() hw/ppc/spapr.c: cleaning up qdev_get_machine() calls net: Add SunGEM device emulation as found on Apple UniNorth Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-09-15ppc/xive: fix OV5_XIVE_EXPLOIT bitsCédric Le Goater
On POWER9, the Client Architecture Support (CAS) negotiation process determines whether the guest operates in XIVE Legacy compatibility or in XIVE exploitation mode. Now that we have initial guest support for the XIVE interrupt controller, let's fix the bits definition which have evolved in the latest specs. The platform advertises the XIVE Exploitation Mode support using the property "ibm,arch-vec-5-platform-support-vec-5", byte 23 bits 0-1 : - 0b00 XIVE legacy mode Only - 0b01 XIVE exploitation mode Only - 0b10 XIVE legacy or exploitation mode The OS asks for XIVE Exploitation Mode support using the property "ibm,architecture-vec-5", byte 23 bits 0-1: - 0b00 XIVE legacy mode Only - 0b01 XIVE exploitation mode Only Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-09-15net: Add SunGEM device emulation as found on Apple UniNorthBenjamin Herrenschmidt
This adds a simplistic emulation of the Sun GEM ethernet controller found in Apple ASICs. Currently we only support the Apple UniNorth 1.x variant, but the other Apple or Sun variants should mostly be a matter of adding PCI IDs options. We have a very primitive emulation of a single Broadcom 5201 PHY which is supported by the MacOS driver. This model brings out-of-the-box networking to MacOS 9, and all versions of OS X I tried with the mac99 platform. Further improvements from Mark: - Remove sungem.h file, moving constants into sungem.c as required - Switch to using tracepoints for debugging - Split register blocks into separate memory regions - Use arrays in SunGEMState to hold register values - Add state-saving support Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>