aboutsummaryrefslogtreecommitdiff
path: root/include/hw/virtio
AgeCommit message (Collapse)Author
2019-03-12vhost-user-blk: Add support to get/set inflight bufferXie Yongji
This patch adds support for vhost-user-blk device to get/set inflight buffer from/to backend. Signed-off-by: Xie Yongji <xieyongji@baidu.com> Signed-off-by: Zhang Yu <zhangyu31@baidu.com> Message-Id: <20190228085355.9614-6-xieyongji@baidu.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-03-12vhost-user: Support transferring inflight buffer between qemu and backendXie Yongji
This patch introduces two new messages VHOST_USER_GET_INFLIGHT_FD and VHOST_USER_SET_INFLIGHT_FD to support transferring a shared buffer between qemu and backend. Firstly, qemu uses VHOST_USER_GET_INFLIGHT_FD to get the shared buffer from backend. Then qemu should send it back through VHOST_USER_SET_INFLIGHT_FD each time we start vhost-user. This shared buffer is used to track inflight I/O by backend. Qemu should retrieve a new one when vm reset. Signed-off-by: Xie Yongji <xieyongji@baidu.com> Signed-off-by: Chai Wen <chaiwen@baidu.com> Signed-off-by: Zhang Yu <zhangyu31@baidu.com> Message-Id: <20190228085355.9614-2-xieyongji@baidu.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-03-12vhost-user: simplify vhost_user_init/vhost_user_cleanupMarc-André Lureau
Take a VhostUserState* that can be pre-allocated, and initialize it with the associated chardev. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Tiwei Bie <tiwei.bie@intel.com> Message-Id: <20190308140454.32437-4-marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-03-11virtio-gpu: make virtio_gpu_reset staticGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20190307080244.9011-4-kraxel@redhat.com
2019-03-06virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINTWei Wang
The new feature enables the virtio-balloon device to receive hints of guest free pages from the free page vq. A notifier is registered to the migration precopy notifier chain. The notifier calls free_page_start after the migration thread syncs the dirty bitmap, so that the free page optimization starts to clear bits of free pages from the bitmap. It calls the free_page_stop before the migration thread syncs the bitmap, which is the end of the current round of ram save. The free_page_stop is also called to stop the optimization in the case when there is an error occurred in the process of ram saving. Note: balloon will report pages which were free at the time of this call. As the reporting happens asynchronously, dirty bit logging must be enabled before this free_page_start call is made. Guest reporting must be disabled before the migration dirty bitmap is synchronized. Signed-off-by: Wei Wang <wei.w.wang@intel.com> CC: Michael S. Tsirkin <mst@redhat.com> CC: Dr. David Alan Gilbert <dgilbert@redhat.com> CC: Juan Quintela <quintela@redhat.com> CC: Peter Xu <peterx@redhat.com> Message-Id: <1544516693-5395-8-git-send-email-wei.w.wang@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> dgilbert: Dropped kernel header update, fixed up CMD_ID_* name change
2019-03-05virtio-net: Switch to using announce timerDr. David Alan Gilbert
Switch virtio's self announcement to use the AnnounceTimer. It keeps it's own AnnounceTimer (per device), and starts running it using a migration post-load and a virtual clock; that way the announce happens once the guest is actually running. The timer uses the migration parameters to set the timing of the repeats. Based on earlier patches by myself and Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2019-03-04Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
pci, pc, virtio: fixes, cleanups, tests Lots of work on tests: BiosTablesTest UEFI app, vhost-user testing for non-Linux hosts. Misc cleanups and fixes all over the place Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Fri 22 Feb 2019 15:51:40 GMT # gpg: using RSA key 281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full] # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full] # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: (26 commits) pci: Sanity test minimum downstream LNKSTA hw/smbios: fix offset of type 3 sku field pci: Move NVIDIA vendor id to the rest of ids virtio-balloon: Safely handle BALLOON_PAGE_SIZE < host page size virtio-balloon: Use ram_block_discard_range() instead of raw madvise() virtio-balloon: Rework ballon_page() interface virtio-balloon: Corrections to address verification virtio-balloon: Remove unnecessary MADV_WILLNEED on deflate i386/kvm: ignore masked irqs when update msi routes contrib/vhost-user-blk: fix the compilation issue Revert "contrib/vhost-user-blk: fix the compilation issue" pc-dimm: use same mechanism for [get|set]_addr tests/data: introduce "uefi-boot-images" with the "bios-tables-test" ISOs tests/uefi-test-tools: add build scripts tests: introduce "uefi-test-tools" with the BiosTablesTest UEFI app roms: build the EfiRom utility from the roms/edk2 submodule roms: add the edk2 project as a git submodule vhost-user-test: create a temporary directory per TestServer vhost-user-test: small changes to init_hugepagefs vhost-user-test: create a main loop per TestServer ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-02-25Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into ↵Peter Maydell
staging Pull request # gpg: Signature made Fri 22 Feb 2019 14:07:01 GMT # gpg: using RSA key 9CA4ABB381AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full] # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full] # Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8 * remotes/stefanha/tags/block-pull-request: (27 commits) tests/virtio-blk: add test for DISCARD command tests/virtio-blk: add test for WRITE_ZEROES command tests/virtio-blk: add virtio_blk_fix_dwz_hdr() function tests/virtio-blk: change assert on data_size in virtio_blk_request() virtio-blk: add DISCARD and WRITE_ZEROES features virtio-blk: set config size depending on the features enabled virtio-net: make VirtIOFeature usable for other virtio devices virtio-blk: add "discard" and "write-zeroes" properties virtio-blk: add host_features field in VirtIOBlock virtio-blk: add acct_failed param to virtio_blk_handle_rw_error() hw/ide: drop iov field from IDEDMA hw/ide: drop iov field from IDEBufferedRequest hw/ide: drop iov field from IDEState tests/test-bdrv-drain: use QEMU_IOVEC_INIT_BUF migration/block: use qemu_iovec_init_buf qemu-img: use qemu_iovec_init_buf block/vmdk: use qemu_iovec_init_buf block/qed: use qemu_iovec_init_buf block/qcow2: use qemu_iovec_init_buf block/qcow: use qemu_iovec_init_buf ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-02-22virtio-balloon: Safely handle BALLOON_PAGE_SIZE < host page sizeDavid Gibson
The virtio-balloon always works in units of 4kiB (BALLOON_PAGE_SIZE), but we can only actually discard memory in units of the host page size. Now, we handle this very badly: we silently ignore balloon requests that aren't host page aligned, and for requests that are host page aligned we discard the entire host page. The latter can corrupt guest memory if its page size is smaller than the host's. The obvious choice would be to disable the balloon if the host page size is not 4kiB. However, that would break the special case where host and guest have the same page size, but that's larger than 4kiB. That case currently works by accident[1] - and is used in practice on many production POWER systems where 64kiB has long been the Linux default page size on both host and guest. To make the balloon safe, without breaking that useful special case, we need to accumulate 4kiB balloon requests until we have a whole contiguous host page to discard. We could in principle do that across all guest memory, but it would require a large bitmap to track. This patch represents a compromise: we track ballooned subpages for a single contiguous host page at a time. This means that if the guest discards all 4kiB chunks of a host page in succession, we will discard it. This is the expected behaviour in the (host page) == (guest page) != 4kiB case we want to support. If the guest scatters 4kiB requests across different host pages, we don't discard anything, and issue a warning. Not ideal, but at least we don't corrupt guest memory as the previous version could. Warning reporting is kind of a compromise here. Determining whether we're in a problematic state at realize() time is tricky, because we'd have to look at the host pagesizes of all memory backends, but we can't really know if some of those backends could be for special purpose memory that's not subject to ballooning. Reporting only when the guest tries to balloon a partial page also isn't great because if the guest page size happens to line up it won't indicate that we're in a non ideal situation. It could also cause alarming repeated warnings whenever a migration is attempted. So, what we do is warn the first time the guest attempts balloon a partial host page, whether or not it will end up ballooning the rest of the page immediately afterwards. [1] Because when the guest attempts to balloon a page, it will submit requests for each 4kiB subpage. Most will be ignored, but the one which happens to be host page aligned will discard the whole lot. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Message-Id: <20190214043916.22128-6-david@gibson.dropbear.id.au> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-02-22virtio-blk: add DISCARD and WRITE_ZEROES featuresStefano Garzarella
This patch adds the support of DISCARD and WRITE_ZEROES commands, that have been introduced in the virtio-blk protocol to have better performance when using SSD backend. We support only one segment per request since multiple segments are not widely used and there are no userspace APIs that allow applications to submit multiple segments in a single call. Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Message-id: 20190221103314.58500-7-sgarzare@redhat.com Message-Id: <20190221103314.58500-7-sgarzare@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-02-22virtio-blk: set config size depending on the features enabledStefano Garzarella
Starting from DISABLE and WRITE_ZEROES features, we use an array of VirtIOFeature (as virtio-net) to properly set the config size depending on the features enabled. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Message-id: 20190221103314.58500-6-sgarzare@redhat.com Message-Id: <20190221103314.58500-6-sgarzare@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-02-22virtio-net: make VirtIOFeature usable for other virtio devicesStefano Garzarella
In order to use VirtIOFeature also in other virtio devices, we move its declaration and the endof() macro (renamed in virtio_endof()) in virtio.h. We add virtio_feature_get_config_size() function to iterate the array of VirtIOFeature and to return the config size depending on the features enabled. (as virtio_net_set_config_size() did) Suggested-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Message-id: 20190221103314.58500-5-sgarzare@redhat.com Message-Id: <20190221103314.58500-5-sgarzare@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-02-22virtio-blk: add host_features field in VirtIOBlockStefano Garzarella
Since configurable features for virtio-blk are growing, this patch adds host_features field in the struct VirtIOBlock. (as in virtio-net) In this way, we can avoid to add new fields for new properties and we can directly set VIRTIO_BLK_F* flags in the host_features. We update "config-wce" and "scsi" property definition to use the new host_features field without change the behaviour. Suggested-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Message-id: 20190221103314.58500-3-sgarzare@redhat.com Message-Id: <20190221103314.58500-3-sgarzare@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-02-22display/virtio: add edid support.Gerd Hoffmann
This patch adds EDID support to the family of virtio-gpu devices. It is turned off by default, use the new edid property to enable it. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20190221081054.13853-1-kraxel@redhat.com
2019-02-22virtio-gpu: remove useless 'waiting' fieldMarc-André Lureau
Let's check renderer_blocked instead directly. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Christophe Fergeau <cfergeau@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190221114330.17968-5-marcandre.lureau@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-02-22virtio-gpu: block both 2d and 3d renderingMarc-André Lureau
Now that 2d commands are translated to 3d rendering, qemu must stop sending 3d updates (from 2d) to Spice as well. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1674324 Cc: cfergeau@redhat.com Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Christophe Fergeau <cfergeau@redhat.com> Tested-by: Christophe Fergeau <cfergeau@redhat.com> Message-id: 20190221114330.17968-4-marcandre.lureau@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-02-22virtio-gpu: remove unused config_sizeMarc-André Lureau
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Christophe Fergeau <cfergeau@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190221114330.17968-3-marcandre.lureau@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-02-22virtio-gpu: remove unused qdevMarc-André Lureau
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Christophe Fergeau <cfergeau@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190221114330.17968-2-marcandre.lureau@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-01-24virtio-net: Fix a typoPhilippe Mathieu-Daudé
Fixes: 2974e916df8 Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20190121181335.3326-1-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-01-22virtio-net: Fix VirtIONet typedef redefinitionPhilippe Mathieu-Daudé
Commit 2974e916df8 introduced the VirtioNetRscChain structure which refer to a VirtIONet, declared later, thus required VirtIONet typedef to use a forward declaration. However, when compiling with Clang in -std=gnu99 mode, this triggers the following warning/error: CC hw/net/virtio-net.o In file included from qemu/hw/net/virtio-net.c:22: include/hw/virtio/virtio-net.h:189:3: error: redefinition of typedef 'VirtIONet' is a C11 feature [-Werror,-Wtypedef-redefinition] } VirtIONet; ^ include/hw/virtio/virtio-net.h:110:26: note: previous definition is here typedef struct VirtIONet VirtIONet; ^ 1 error generated. make: *** [rules.mak:69: hw/net/virtio-net.o] Error 1 Fix it by removing the duplicate typedef definition. Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Greg Kurz <groug@kaod.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-01-17virtio-net: support RSC v4/v6 tcp traffic for Windows HCKYuri Benditovich
This commit adds implementation of RX packets coalescing, compatible with requirements of Windows Hardware compatibility kit. The device enables feature VIRTIO_NET_F_RSC_EXT in host features if it supports extended RSC functionality as defined in the specification. This feature requires at least one of VIRTIO_NET_F_GUEST_TSO4, VIRTIO_NET_F_GUEST_TSO6. Windows guest driver acks this feature only if VIRTIO_NET_F_CTRL_GUEST_OFFLOADS is also present. If the guest driver acks VIRTIO_NET_F_RSC_EXT feature, the device coalesces TCPv4 and TCPv6 packets (if respective VIRTIO_NET_F_GUEST_TSO feature is on, populates extended RSC information in virtio header and sets VIRTIO_NET_HDR_F_RSC_INFO bit in header flags. The device does not recalculate checksums in the coalesced packet, so they are not valid. In this case: All the data packets in a tcp connection are cached to a single buffer in every receive interval, and will be sent out via a timer, the 'virtio_net_rsc_timeout' controls the interval, this value may impact the performance and response time of tcp connection, 50000(50us) is an experience value to gain a performance improvement, since the whql test sends packets every 100us, so '300000(300us)' passes the test case, it is the default value as well, tune it via the command line parameter 'rsc_interval' within 'virtio-net-pci' device, for example, to launch a guest with interval set as '500000': 'virtio-net-pci,netdev=hostnet1,bus=pci.0,id=net1,mac=00, guest_rsc_ext=on,rsc_interval=500000' The timer will only be triggered if the packets pool is not empty, and it'll drain off all the cached packets. 'NetRscChain' is used to save the segments of IPv4/6 in a VirtIONet device. A new segment becomes a 'Candidate' as well as it passed sanity check, the main handler of TCP includes TCP window update, duplicated ACK check and the real data coalescing. An 'Candidate' segment means: 1. Segment is within current window and the sequence is the expected one. 2. 'ACK' of the segment is in the valid window. Sanity check includes: 1. Incorrect version in IP header 2. An IP options or IP fragment 3. Not a TCP packet 4. Sanity size check to prevent buffer overflow attack. 5. An ECN packet Even though, there might more cases should be considered such as ip identification other flags, while it breaks the test because windows set it to the same even it's not a fragment. Normally it includes 2 typical ways to handle a TCP control flag, 'bypass' and 'finalize', 'bypass' means should be sent out directly, while 'finalize' means the packets should also be bypassed, but this should be done after search for the same connection packets in the pool and drain all of them out, this is to avoid out of order fragment. All the 'SYN' packets will be bypassed since this always begin a new' connection, other flags such 'URG/FIN/RST/CWR/ECE' will trigger a finalization, because this normally happens upon a connection is going to be closed, an 'URG' packet also finalize current coalescing unit. Statistics can be used to monitor the basic coalescing status, the 'out of order' and 'out of window' means how many retransmitting packets, thus describe the performance intuitively. Difference between ip v4 and v6 processing: Fragment length in ipv4 header includes itself, while it's not included for ipv6, thus means ipv6 can carry a real 65535 payload. Note that main goal of implementing this feature in software is to create reference setup for certification tests. In such setups guest migration is not required, so the coalesced packets not yet delivered to the guest will be lost in case of migration. Signed-off-by: Wei Xu <wexu@redhat.com> Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-09-03virtio-gpu: pass down VirtIOGPU pointer to a bunch of functionsGerd Hoffmann
No functional change, just preparation for a followup patch which needs a VirtIOGPU pointer. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-Id: <20180829122101.29852-2-kraxel@redhat.com>
2018-08-30Revert "virtio-gpu: fix crashes upon warm reboot with vga mode"Gerd Hoffmann
This reverts commit 93f874fe9dbe0b997b5a9459840957efd13d7191. Now with virtio-vga being resetted properly the crash workaround is not needed any more. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-id: 20180821111313.27792-3-kraxel@redhat.com
2018-08-30virtio-vga: fix resetGerd Hoffmann
We must call the reset functions for both virtio-gpu and vga to properly reset the combo device. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-id: 20180821111313.27792-2-kraxel@redhat.com
2018-08-23vhost-user-scsi: move host_features into VHostSCSICommonGreg Edwards
In preparation for having vhost-scsi also make use of host_features, move it from struct VHostUserSCSI into struct VHostSCSICommon. Signed-off-by: Greg Edwards <gedwards@ddn.com> Message-Id: <20180808195235.5843-2-gedwards@ddn.com> Reviewed-by: Felipe Franciosi <felipe@nutanix.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-07virtio-gpu: fix crashes upon warm reboot with vga modeMarc-André Lureau
With vga=775 on the Linux command line a first boot of the VM running Linux works fine. After a warm reboot it crashes during Linux boot. Before that, valgrind points out bad memory write to console surface. The VGA code is not aware that virtio-gpu got a message surface scanout when the display is disabled. Let's reset VGA graphic mode when it is the case, so that a new display surface is created when doing further VGA operations. https://bugs.launchpad.net/qemu/+bug/1784900/ Reported-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Message-id: 20180803153235.4134-1-marcandre.lureau@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-07-02hw/virtio: Use the IEC binary prefix definitionsPhilippe Mathieu-Daudé
It eases code review, unit is explicit. Patch generated using: $ git grep -E '(1024|2048|4096|8192|(<<|>>).?(10|20|30))' hw/ include/hw/ and modified manually. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180625124238.25339-39-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-26virtio-gpu-3d: Drop workaround for VIRTIO_GPU_CAPSET_VIRGL2 definePeter Maydell
In commit a8bff79e9f27df we added a definition to hw/virtio/virtio-gpu.h for VIRTIO_GPU_CAPSET_VIRGL2, as a workaround for it not yet being in the Linux kernel headers. In commit 77d361b13c19 we updated our kernel headers to a version which does define the macro, so we can now remove our workaround. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180622173249.29963-1-peter.maydell@linaro.org Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-06-04Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
acpi, vhost, misc: fixes, features vDPA support, fix to vhost blk RO bit handling, some include path cleanups, NFIT ACPI table. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Fri 01 Jun 2018 17:25:19 BST # gpg: using RSA key 281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: (31 commits) vhost-blk: turn on pre-defined RO feature bit ACPI testing: test NFIT platform capabilities nvdimm, acpi: support NFIT platform capabilities tests/.gitignore: add entry for generated file arch_init: sort architectures ui: use local path for local headers qga: use local path for local headers colo: use local path for local headers migration: use local path for local headers usb: use local path for local headers sd: fix up include vhost-scsi: drop an unused include ppc: use local path for local headers rocker: drop an unused include e1000e: use local path for local headers ioapic: fix up includes ide: use local path for local headers display: use local path for local headers trace: use local path for local headers migration: drop an unused include ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-01vhost-blk: turn on pre-defined RO feature bitChangpeng Liu
Read only feature shouldn't be negotiable, because if the backend device reported Read only feature supported, QEMU host driver shouldn't change backend's RO attribute. While here, also enable the vhost-user-blk test utility to test RO feature. Signed-off-by: Changpeng Liu <changpeng.liu@intel.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-06-01virtio-gpu-3d: Define VIRTIO_GPU_CAPSET_VIRGL2 elsewhereAlex Williamson
Commit 5643cc94ac1c ("virtio-gpu-3d: add support for second capability set (v4)") updated virtio_gpu.h with a define that does not yet(?) exist upstream resulting in build breakage every time Linux headers are updated via the standard update script. Conditionally define this within QEMU code instead to avoid future breakage. Cc: Dave Airlie <airlied@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Fixes: 5643cc94ac1c ("virtio-gpu-3d: add support for second capability set (v4)") Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20180525132755.21839-2-peter.maydell@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-01hw: Do not include "exec/address-spaces.h" if it is not necessaryPhilippe Mathieu-Daudé
Code change produced with: $ git grep '#include "exec/address-spaces.h"' hw include/hw | \ cut -d: -f-1 | \ xargs egrep -L "(get_system_|address_space_)" | \ xargs sed -i.bak '/#include "exec\/address-spaces.h"/d' Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180528232719.4721-12-f4bug@amsat.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-05-24vhost-user: support registering external host notifiersTiwei Bie
This patch introduces VHOST_USER_PROTOCOL_F_HOST_NOTIFIER. With this feature negotiated, vhost-user backend can register memory region based host notifiers. And it will allow the guest driver in the VM to notify the hardware accelerator at the vhost-user backend directly. Signed-off-by: Tiwei Bie <tiwei.bie@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-05-24vhost-user: introduce shared vhost-user stateTiwei Bie
When multi queue is enabled e.g. for a virtio-net device, each queue pair will have a vhost_dev, and the only thing shared between vhost devs currently is the chardev. This patch introduces a vhost-user state structure which will be shared by all vhost devs of the same virtio device. Signed-off-by: Tiwei Bie <tiwei.bie@intel.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-05-24vhost: allow backends to filter memory sectionsTiwei Bie
This patch introduces a vhost op for vhost backends to allow them to filter the memory sections that they can handle. Signed-off-by: Tiwei Bie <tiwei.bie@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-05-23virtio: support setting memory region based host notifierTiwei Bie
This patch introduces the support for setting memory region based host notifiers for virtio device. This is helpful when using a hardware accelerator for a virtio device, because hardware heavily depends on the notification, this will allow the guest driver in the VM to notify the hardware directly. Signed-off-by: Tiwei Bie <tiwei.bie@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-05-20trivial: Do not include pci.h if it is not necessaryThomas Huth
There is no need to include pci.h in these files. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2018-03-13virtio-net: add linkspeed and duplex settings to virtio-netJason Baron
Although linkspeed and duplex can be set in a linux guest via 'ethtool -s', this requires custom ethtool commands for virtio-net by default. Introduce a new feature flag, VIRTIO_NET_F_SPEED_DUPLEX, which allows the hypervisor to export a linkspeed and duplex setting. The user can subsequently overwrite it later if desired via: 'ethtool -s'. Linkspeed and duplex settings can be set as: '-device virtio-net,speed=10000,duplex=full' where speed is [0...INT_MAX], and duplex is ["half"|"full"]. Signed-off-by: Jason Baron <jbaron@akamai.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: virtio-dev@lists.oasis-open.org Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-13virtio-net: use 64-bit values for feature flagsJason Baron
In prepartion for using some of the high order feature bits, make sure that virtio-net uses 64-bit values everywhere. Signed-off-by: Jason Baron <jbaron@akamai.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: virtio-dev@lists.oasis-open.org Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-01cryptodev-vhost-user: add crypto session handlerGonglei
Introduce two vhost-user meassges: VHOST_USER_CREATE_CRYPTO_SESSION and VHOST_USER_CLOSE_CRYPTO_SESSION. At this point, the QEMU side support crypto operation in cryptodev host-user backend. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com> Signed-off-by: Jay Zhou <jianjay.zhou@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-01cryptodev: add vhost supportGonglei
Impliment the vhost-crypto's funtions, such as startup, stop and notification etc. Introduce an enum QCryptoCryptoDevBackendOptionsType in order to identify the cryptodev vhost backend is vhost-user or vhost-kernel-module (If exist). At this point, the cryptdoev-vhost-user works. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com> Signed-off-by: Jay Zhou <jianjay.zhou@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-02-26virtio-gpu-3d: add support for second capability set (v4)Dave Airlie
Due to a kernel bug we can never increase the size of capability set 1, so introduce a new capability set in parallel, old userspace will continue to use the old set, new userspace will start using the new one when it detects a fixed kernel. v2: don't use a define from virglrenderer, just probe it. v3: fix compilation when virglrenderer disabled v4: fix style warning, just use ?: op instead. Signed-off-by: Dave Airlie <airlied@redhat.com> Message-id: 20180223023814.24459-1-airlied@gmail.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-02-08vhost: Clean out old vhost_set_memory and friendsDr. David Alan Gilbert
Remove the old update mechanism, vhost_set_memory, and the functions and flags it used. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-02-08vhost: Build temporary section list and deref after commitDr. David Alan Gilbert
Igor spotted that there's a race, where a region that's unref'd in a _del callback might be free'd before the set_mem_table call in the _commit callback, and thus the vhost might end up using free memory. Fix this by building a complete temporary sections list, ref'ing every section (during add and nop) and then unref'ing the whole list right at the end of commit. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-02-08virtio: remove event notifier cleanup call on de-assignGal Hammer
The virtio_bus_set_host_notifier function no longer calls event_notifier_cleanup when a event notifier is removed. The commit updates the code to match the new behavior and calls virtio_bus_cleanup_host_notifier after the notifier was de-assign and no longer in use. This change is a preparation to allow executing the virtio_bus_set_host_notifier function in a memory region transaction. Signed-off-by: Gal Hammer <ghammer@redhat.com> Reviewed-by: Greg Kurz <groug@kaod.org> Tested-by: Greg Kurz <groug@kaod.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-01-18vhost-user-blk: introduce a new vhost-user-blk host deviceChangpeng Liu
This commit introduces a new vhost-user device for block, it uses a chardev to connect with the backend, same with Qemu virito-blk device, Guest OS still uses the virtio-blk frontend driver. To use it, start QEMU with command line like this: qemu-system-x86_64 \ -chardev socket,id=char0,path=/path/vhost.socket \ -device vhost-user-blk-pci,chardev=char0,num-queues=2, \ bootindex=2... \ Users can use different parameters for `num-queues` and `bootindex`. Different with exist Qemu virtio-blk host device, it makes more easy for users to implement their own I/O processing logic, such as all user space I/O stack against hardware block device. It uses the new vhost messages(VHOST_USER_GET_CONFIG) to get block virtio config information from backend process. Signed-off-by: Changpeng Liu <changpeng.liu@intel.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-01-18vhost-user: add new vhost user messages to support virtio config spaceChangpeng Liu
Add VHOST_USER_GET_CONFIG/VHOST_USER_SET_CONFIG messages which can be used for live migration of vhost user devices, also vhost user devices can benefit from the messages to get/set virtio config space from/to the I/O target. For the purpose to support virtio config space change, VHOST_USER_SLAVE_CONFIG_CHANGE_MSG message is added as the event notifier in case virtio config space change in the slave I/O target. Signed-off-by: Changpeng Liu <changpeng.liu@intel.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-12-19virtio-blk: make queue size configurableMark Kanda
Depending on the configuration, it can be beneficial to adjust the virtio-blk queue size to something other than the current default of 128. Add a new property to make the queue size configurable. Signed-off-by: Mark Kanda <mark.kanda@oracle.com> Reviewed-by: Karl Heubaum <karl.heubaum@oracle.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Ameya More <ameya.more@oracle.com> Message-id: 52e6d742811f10dbd16e996e86cf375b9577c187.1513005190.git.mark.kanda@oracle.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-12-01virtio: Add queue interface to restore avail index from vring used indexMaxime Coquelin
In case of backend crash, it is not possible to restore internal avail index from the backend value as vhost_get_vring_base callback fails. This patch provides a new interface to restore internal avail index from the vring used index, as done by some vhost-user backend on reconnection. Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-09-29virtio-input: send rel-wheel events for wheel buttonsGerd Hoffmann
qemu uses wheel-up/down button events for mouse wheel input, however linux applications typically want REL_WHEEL events. This fixes wheel with linux guests. Tested with X11/wayland, and windows virtio-input driver. Based on a patch from Marc. Added property to enable/disable wheel axis. Cc: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20170926113243.26081-1-kraxel@redhat.com
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-17 18:57:59 +0000