aboutsummaryrefslogtreecommitdiff
path: root/include/hw/s390x/s390-ccw.h
AgeCommit message (Collapse)Author
2020-09-09Use DECLARE_*CHECKER* macrosEduardo Habkost
Generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=TypeCheckMacro $(git grep -l '' -- '*.[ch]') Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-12-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-13-ehabkost@redhat.com> Message-Id: <20200831210740.126168-14-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-09Move QOM typedefs and add missing includesEduardo Habkost
Some typedefs and macros are defined after the type check macros. This makes it difficult to automatically replace their definitions with OBJECT_DECLARE_TYPE. Patch generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]') which will split "typdef struct { ... } TypedefName" declarations. Followed by: $ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \ $(git grep -l '' -- '*.[ch]') which will: - move the typedefs and #defines above the type check macros - add missing #include "qom/object.h" lines if necessary Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-9-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-10-ehabkost@redhat.com> Message-Id: <20200831210740.126168-11-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-06-18vfio-ccw: Add support for the schib regionFarhan Ali
The schib region can be used to obtain the latest SCHIB from the host passthrough subchannel. Since the guest SCHIB is virtualized, we currently only update the path related information so that the guest is aware of any path related changes when it issues the 'stsch' instruction. Signed-off-by: Farhan Ali <alifm@linux.ibm.com> Signed-off-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20200505125757.98209-4-farman@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2020-05-15qdev: Unrealize must not failMarkus Armbruster
Devices may have component devices and buses. Device realization may fail. Realization is recursive: a device's realize() method realizes its components, and device_set_realized() realizes its buses (which should in turn realize the devices on that bus, except bus_set_realized() doesn't implement that, yet). When realization of a component or bus fails, we need to roll back: unrealize everything we realized so far. If any of these unrealizes failed, the device would be left in an inconsistent state. Must not happen. device_set_realized() lets it happen: it ignores errors in the roll back code starting at label child_realize_fail. Since realization is recursive, unrealization must be recursive, too. But how could a partly failed unrealize be rolled back? We'd have to re-realize, which can fail. This design is fundamentally broken. device_set_realized() does not roll back at all. Instead, it keeps unrealizing, ignoring further errors. It can screw up even for a device with no buses: if the lone dc->unrealize() fails, it still unregisters vmstate, and calls listeners' unrealize() callback. bus_set_realized() does not roll back either. Instead, it stops unrealizing. Fortunately, no unrealize method can fail, as we'll see below. To fix the design error, drop parameter @errp from all the unrealize methods. Any unrealize method that uses @errp now needs an update. This leads us to unrealize() methods that can fail. Merely passing it to another unrealize method cannot cause failure, though. Here are the ones that do other things with @errp: * virtio_serial_device_unrealize() Fails when qbus_set_hotplug_handler() fails, but still does all the other work. On failure, the device would stay realized with its resources completely gone. Oops. Can't happen, because qbus_set_hotplug_handler() can't actually fail here. Pass &error_abort to qbus_set_hotplug_handler() instead. * hw/ppc/spapr_drc.c's unrealize() Fails when object_property_del() fails, but all the other work is already done. On failure, the device would stay realized with its vmstate registration gone. Oops. Can't happen, because object_property_del() can't actually fail here. Pass &error_abort to object_property_del() instead. * spapr_phb_unrealize() Fails and bails out when remove_drcs() fails, but other work is already done. On failure, the device would stay realized with some of its resources gone. Oops. remove_drcs() fails only when chassis_from_bus()'s object_property_get_uint() fails, and it can't here. Pass &error_abort to remove_drcs() instead. Therefore, no unrealize method can fail before this patch. device_set_realized()'s recursive unrealization via bus uses object_property_set_bool(). Can't drop @errp there, so pass &error_abort. We similarly unrealize with object_property_set_bool() elsewhere, always ignoring errors. Pass &error_abort instead. Several unrealize methods no longer handle errors from other unrealize methods: virtio_9p_device_unrealize(), virtio_input_device_unrealize(), scsi_qdev_unrealize(), ... Much of the deleted error handling looks wrong anyway. One unrealize methods no longer ignore such errors: usb_ehci_pci_exit(). Several realize methods no longer ignore errors when rolling back: v9fs_device_realize_common(), pci_qdev_unrealize(), spapr_phb_realize(), usb_qdev_realize(), vfio_ccw_realize(), virtio_device_realize(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-17-armbru@redhat.com>
2019-06-24vfio-ccw: support async command subregionCornelia Huck
A vfio-ccw device may provide an async command subregion for issuing halt/clear subchannel requests. If it is present, use it for sending halt/clear request to the device; if not, fall back to emulation (as done today). Reviewed-by: Farhan Ali <alifm@linux.ibm.com> Message-Id: <20190613092542.2834-1-cohuck@redhat.com> Reviewed-by: Eric Farman <farman@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-04-12s390 vfio-ccw: Add bootindex property and IPLB dataJason J. Herne
Add bootindex property and iplb data for vfio-ccw devices. This allows us to forward boot information into the bios for vfio-ccw devices. Refactor s390_get_ccw_device() to return device type. This prevents us from having to use messy casting logic in several places. Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com> Acked-by: Halil Pasic <pasic@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <1554388475-18329-2-git-send-email-jjherne@linux.ibm.com> [thuth: fixed "typedef struct VFIOCCWDevice" build failure with clang] Signed-off-by: Thomas Huth <thuth@redhat.com>
2017-10-20s390x: improve error handling for SSCH and RSCHHalil Pasic
Simplify the error handling of the SSCH and RSCH handler avoiding arbitrary and cryptic error codes being used to tell how the instruction is supposed to end. Let the code detecting the condition tell how it's to be handled in a less ambiguous way. It's best to handle SSCH and RSCH in one go as the emulation of the two shares a lot of code. For passthrough this change isn't pure refactoring, but changes the way kernel reported EFAULT is handled. After clarifying the kernel interface we decided that EFAULT shall be mapped to unit exception. Same goes for unexpected error codes and absence of required ORB flags. Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com> Message-Id: <20171017140453.51099-4-pasic@linux.vnet.ibm.com> Tested-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com> [CH: cosmetic changes] Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-05-19s390x/css: introduce and realize ccw-request callbackXiao Feng Ren
Introduce a new callback on subchannel to handle ccw-request. Realize the callback in vfio-ccw device. Besides, resort to the event notifier handler to handling the ccw-request results. 1. Pread the I/O results via MMIO region. 2. Update the scsw info to guest. 3. Inject an I/O interrupt to notify guest the I/O result. Acked-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Xiao Feng Ren <renxiaof@linux.vnet.ibm.com> Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com> Message-Id: <20170517004813.58227-11-bjsdjshi@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2017-05-19s390x/css: device support for s390-ccw passthroughDong Jia Shi
In order to support subchannels pass-through, we introduce a s390 subchannel device called "s390-ccw" to hold the real subchannel info. The s390-ccw devices inherit from the abstract CcwDevice which connect to the existing virtual-css-bus. Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com> Message-Id: <20170517004813.58227-7-bjsdjshi@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>