aboutsummaryrefslogtreecommitdiff
path: root/include/hw/riscv
AgeCommit message (Collapse)Author
2022-10-14hw/riscv: virt: Enable booting S-mode firmware from pflashSunil V L
To boot S-mode firmware payload like EDK2 from persistent flash storage, qemu needs to pass the flash address as the next_addr in fw_dynamic_info to the opensbi. When both -kernel and -pflash options are provided in command line, the kernel (and initrd if -initrd) will be copied to fw_cfg table. The S-mode FW will load the kernel/initrd from fw_cfg table. If only pflash is given but not -kernel, then it is the job of of the S-mode firmware to locate and load the kernel. In either case, update the kernel_entry with the flash address so that the opensbi can jump to the entry point of the S-mode firmware. Signed-off-by: Sunil V L <sunilvl@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20221004092351.18209-4-sunilvl@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-09-27hw/riscv/sifive_e: Fix inheritance of SiFiveEStateBernhard Beschow
SiFiveEState inherits from SysBusDevice while it's TypeInfo claims it to inherit from TYPE_MACHINE. This is an inconsistency which can cause undefined behavior such as memory corruption. Change SiFiveEState to inherit from MachineState since it is registered as a machine. Fixes: 0869490b1c ("riscv: sifive_e: Manually define the machine") Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20220922075232.33653-1-shentey@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-09-27hw/riscv: opentitan: Expose the resetvec as a SoC propertyAlistair Francis
On the OpenTitan hardware the resetvec is fixed at the start of ROM. In QEMU we don't run the ROM code and instead just jump to the next stage. This means we need to be a little more flexible about what the resetvec is. This patch allows us to set the resetvec from the command line with something like this: -global driver=riscv.lowrisc.ibex.soc,property=resetvec,value=0x20000400 This way as the next stage changes we can update the resetvec. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20220914101108.82571-4-alistair.francis@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-09-07hw/riscv: virt: fix the plic's address cellsConor Dooley
When optional AIA PLIC support was added the to the virt machine, the address cells property was removed leading the issues with dt-validate on a dump from the virt machine: /stuff/qemu/qemu.dtb: plic@c000000: '#address-cells' is a required property From schema: /stuff/linux/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml Add back the property to suppress the warning. Reported-by: Rob Herring <robh@kernel.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Message-id: 20220810184612.157317-3-mail@conchuod.ie Link: https://lore.kernel.org/linux-riscv/20220803170552.GA2250266-robh@kernel.org/ Fixes: e6faee6585 ("hw/riscv: virt: Add optional AIA APLIC support to virt machine") Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-09-07hw/riscv: microchip_pfsoc: fix kernel panics due to missing peripheralsConor Dooley
Booting using "Direct Kernel Boot" for PolarFire SoC & skipping u-boot entirely is probably not advisable, but it does at least show signs of life. Recent Linux kernel versions make use of peripherals that are missing definitions in QEMU and lead to kernel panics. These issues almost certain rear their head for other methods of booting, but I was unable to figure out a suitable HSS version that is recent enough to support these peripherals & works with QEMU. With these peripherals added, booting a kernel with the following hangs hangs waiting for the system controller's hwrng, but the kernel no longer panics. With the Linux driver for hwrng disabled, it boots to console. qemu-system-riscv64 -M microchip-icicle-kit \ -m 2G -smp 5 \ -kernel $(vmlinux_bin) \ -dtb $(dtb)\ -initrd $(initramfs) \ -display none -serial null \ -serial stdio More peripherals are added than strictly required to fix the panics in the hopes of avoiding a replication of this problem in the future. Some of the peripherals which are in the device tree for recent kernels are implemented in the FPGA fabric. The eMMC/SD mux, which exists as an unimplemented device is replaced by a wider entry. This updated entry covers both the mux & the remainder of the FPGA fabric connected to the MSS using Fabric Interrconnect (FIC) 3. Link: https://github.com/polarfire-soc/icicle-kit-reference-design#fabric-memory-map Link: https://ww1.microchip.com/downloads/aemDocuments/documents/FPGA/ProductDocuments/SupportingCollateral/V1_4_Register_Map.zip Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20220813135127.2971754-1-mail@conchuod.ie> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-09-07hw/riscv: opentitan: bump opentitan versionWilfred Mallawa
The following patch updates opentitan to match the new configuration, as per, lowRISC/opentitan@217a0168ba118503c166a9587819e3811eeb0c0c Note: with this patch we now skip the usage of the opentitan `boot_rom`. The Opentitan boot rom contains hw verification for devies which we are currently not supporting in qemu. As of now, the `boot_rom` has no major significance, however, would be good to support in the future. Tested by running utests from the latest tock [1] (that supports this version of OT). [1] https://github.com/tock/tock/pull/3056 Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20220812005229.358850-1-wilfred.mallawa@opensource.wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-09-07hw/riscv: remove 'fdt' param from riscv_setup_rom_reset_vec()Daniel Henrique Barboza
The 'fdt' param is not being used in riscv_setup_rom_reset_vec(). Simplify the API by removing it. While we're at it, remove the redundant 'return' statement at the end of function. Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Alistair Francis <alistair.francis@wdc.com> Cc: Bin Meng <bin.meng@windriver.com> Cc: Vijai Kumar K <vijai@behindbytes.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20220728181926.2123771-1-danielhb413@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-05-11Clean up header guards that don't match their file nameMarkus Armbruster
Header guard symbols should match their file name to make guard collisions less likely. Cleaned up with scripts/clean-header-guards.pl, followed by some renaming of new guard symbols picked by the script to better ones. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20220506134911.2856099-2-armbru@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> [Change to generated file ebpf/rss.bpf.skeleton.h backed out]
2022-04-29hw/riscv: virt: Create a platform busAlistair Francis
Create a platform bus to allow dynamic devices to be connected. This is based on the ARM implementation. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-Id: <20220427234146.1130752-4-alistair.francis@opensource.wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-04-29hw/riscv: virt: Add a machine done notifierAlistair Francis
Move the binary and device tree loading code to the machine done notifier. This allows us to prepare for editing the device tree as part of the notifier. This is based on similar code in the ARM virt machine. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-Id: <20220427234146.1130752-2-alistair.francis@opensource.wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-04-22hw/riscv: boot: Support 64bit fdt address.Dylan Jhong
The current riscv_load_fdt() forces fdt_load_addr to be placed at a dram address within 3GB, but not all platforms have dram_base within 3GB. This patch adds an exception for dram base not within 3GB, which will place fdt at dram_end align 16MB. riscv_setup_rom_reset_vec() also needs to be modified Signed-off-by: Dylan Jhong <dylan@andestech.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20220419115945.37945-1-dylan@andestech.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-04-22riscv: opentitan: Connect opentitan SPI HostWilfred Mallawa
Connect spi host[1/0] to opentitan. Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20220303045426.511588-2-alistair.francis@opensource.wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-03-03hw: riscv: opentitan: fixup SPI addressesWilfred Mallawa
This patch updates the SPI_DEVICE, SPI_HOST0, SPI_HOST1 base addresses. Also adds these as unimplemented devices. The address references can be found [1]. [1] https://github.com/lowRISC/opentitan/blob/6c317992fbd646818b34f2a2dbf44bc850e461e4/hw/top_earlgrey/sw/autogen/top_earlgrey_memory.h#L107 Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-Id: <20220218063839.405082-1-alistair.francis@opensource.wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-03-03hw/riscv: virt: Increase maximum number of allowed CPUsAnup Patel
To facilitate software development of RISC-V systems with large number of HARTs, we increase the maximum number of allowed CPUs to 512 (2^9). We also add a detailed source level comments about limit defines which impact the physical address space utilization. Signed-off-by: Anup Patel <anup.patel@wdc.com> Signed-off-by: Anup Patel <anup@brainfault.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Frank Chang <frank.chang@sifive.com> Message-Id: <20220220085526.808674-6-anup@brainfault.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-03-03hw/riscv: virt: Add optional AIA IMSIC support to virt machineAnup Patel
We extend virt machine to emulate both AIA IMSIC and AIA APLIC devices only when "aia=aplic-imsic" parameter is passed along with machine name in the QEMU command-line. The AIA IMSIC is only a per-HART MSI controller so we use AIA APLIC in MSI-mode to forward all wired interrupts as MSIs to the AIA IMSIC. We also provide "aia-guests=<xyz>" parameter which can be used to specify number of VS-level AIA IMSIC Guests MMIO pages for each HART. Signed-off-by: Anup Patel <anup.patel@wdc.com> Signed-off-by: Anup Patel <anup@brainfault.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20220220085526.808674-4-anup@brainfault.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-03-03hw/riscv: virt: Add optional AIA APLIC support to virt machineAnup Patel
We extend virt machine to emulate AIA APLIC devices only when "aia=aplic" parameter is passed along with machine name in QEMU command-line. When "aia=none" or not specified then we fallback to original PLIC device emulation. Signed-off-by: Anup Patel <anup.patel@wdc.com> Signed-off-by: Anup Patel <anup@brainfault.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20220220085526.808674-2-anup@brainfault.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-01-21hw/riscv: Remove macros for ELF BIOS image namesAnup Patel
Now that RISC-V Spike machine can use BIN BIOS images, we remove the macros used for ELF BIOS image names. Signed-off-by: Anup Patel <apatel@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-01-21hw/riscv: spike: Allow using binary firmware as biosAnup Patel
Currently, we have to use OpenSBI firmware ELF as bios for the spike machine because the HTIF console requires ELF for parsing "fromhost" and "tohost" symbols. The latest OpenSBI can now optionally pick-up HTIF register address from HTIF DT node so using this feature spike machine can now use OpenSBI firmware BIN as bios. Signed-off-by: Anup Patel <apatel@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-01-21target/riscv: Support start kernel directly by KVMYifei Jiang
Get kernel and fdt start address in virt.c, and pass them to KVM when cpu reset. Add kvm_riscv.h to place riscv specific interface. In addition, PLIC is created without M-mode PLIC contexts when KVM is enabled. Signed-off-by: Yifei Jiang <jiangyifei@huawei.com> Signed-off-by: Mingwang Li <limingwang@huawei.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Anup Patel <anup@brainfault.org> Message-id: 20220112081329.1835-7-jiangyifei@huawei.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-01-08hw/riscv: virt: Allow support for 32 coresAlistair Francis
Linux supports up to 32 cores for both 32-bit and 64-bit RISC-V, so let's set that as the maximum for the virt board. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/435 Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-Id: <20220105213937.1113508-9-alistair.francis@opensource.wdc.com>
2021-10-28hw/riscv: microchip_pfsoc: Use the PLIC config helper functionAlistair Francis
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Message-id: 20211022060133.3045020-4-alistair.francis@opensource.wdc.com
2021-10-28hw/riscv: sifive_u: Use the PLIC config helper functionAlistair Francis
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Message-id: 20211022060133.3045020-3-alistair.francis@opensource.wdc.com
2021-10-28hw/riscv: boot: Add a PLIC config string functionAlistair Francis
Add a generic function that can create the PLIC strings. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-id: 20211022060133.3045020-2-alistair.francis@opensource.wdc.com
2021-10-28hw/riscv: virt: Don't use a macro for the PLIC configurationAlistair Francis
Using a macro for the PLIC configuration doesn't make the code any easier to read. Instead it makes it harder to figure out what is going on, so let's remove it. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20211022060133.3045020-1-alistair.francis@opensource.wdc.com
2021-10-22hw/riscv: opentitan: Update to the latest buildAlistair Francis
Update the OpenTitan machine model to match the latest OpenTitan FPGA design. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-id: 18b1b681b0f8dd2461e819d1217bf0b530812680.1634524691.git.alistair.francis@wdc.com
2021-09-21hw/riscv: virt: Add optional ACLINT support to virt machineAnup Patel
We extend virt machine to emulate ACLINT devices only when "aclint=on" parameter is passed along with machine name in QEMU command-line. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-id: 20210831110603.338681-5-anup.patel@wdc.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-09-21sifive_u: Connect the SiFive PWM deviceAlistair Francis
Connect the SiFive PWM device and expose it via the device tree. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-id: 22f98648b4e012f78529a56f5ca60b0b27852a4d.1631159656.git.alistair.francis@wdc.com
2021-07-15hw/riscv: opentitan: Add the flash aliasAlistair Francis
OpenTitan has an alias of flash avaliable which is called virtual flash. Add support for that in the QEMU model. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-id: c9cfbd2dd840fd0076877b8ea4d6dcfce60db5e9.1625801868.git.alistair.francis@wdc.com
2021-07-15hw/riscv: opentitan: Add the unimplement rv_core_ibex_periAlistair Francis
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-id: ed707782e84118e1b06a32fd79b70fecfb54ff82.1625801868.git.alistair.francis@wdc.com
2021-06-24hw/riscv: OpenTitan: Connect the mtime and mtimecmp timerAlistair Francis
Connect the Ibex timer to the OpenTitan machine. The timer can trigger the RISC-V MIE interrupt as well as a custom device interrupt. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-id: 5e7f4e9b4537f863bcb8db1264b840b56ef2a929.1624001156.git.alistair.francis@wdc.com
2021-06-08hw/riscv: Use macros for BIOS image namesBin Meng
The OpenSBI BIOS image names are used by many RISC-V machines. Let's define macros for them. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210430071302.1489082-7-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-05-11hw/opentitan: Update the interrupt layoutAlistair Francis
Update the OpenTitan interrupt layout to match the latest OpenTitan bitstreams. This involves changing the Ibex PLIC memory layout and the UART interrupts. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-id: e92b696f1809c9fa4410da2e9f23c414db5a6960.1617202791.git.alistair.francis@wdc.com
2021-05-11hw/riscv: Connect Shakti UART to Shakti platformVijai Kumar K
Connect one shakti uart to the shakti_c machine. Signed-off-by: Vijai Kumar K <vijai@behindbytes.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210401181457.73039-5-vijai@behindbytes.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-05-11riscv: Add initial support for Shakti C machineVijai Kumar K
Add support for emulating Shakti reference platform based on C-class running on arty-100T board. https://gitlab.com/shaktiproject/cores/shakti-soc/-/blob/master/README.rst Signed-off-by: Vijai Kumar K <vijai@behindbytes.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210401181457.73039-3-vijai@behindbytes.com [Changes by AF: - Check for mstate->firmware before loading it ] Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-03-22hw/riscv: microchip_pfsoc: Map EMMC/SD mux registerBin Meng
Since HSS commit c20a89f8dcac, the Icicle Kit reference design has been updated to use a register mapped at 0x4f000000 instead of a GPIO to control whether eMMC or SD card is to be used. With this support the same HSS image can be used for both eMMC and SD card boot flow, while previously two different board configurations were used. This is undocumented but one can take a look at the HSS code HSS_MMCInit() in services/mmc/mmc_api.c. With this commit, HSS image built from 2020.12 release boots again. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210322075248.136255-1-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-03-22hw/riscv: Add fw_cfg support to virtAsherah Connor
Provides fw_cfg for the virt machine on riscv. This enables using e.g. ramfb later. Signed-off-by: Asherah Connor <ashe@kivikakk.ee> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210318235041.17175-2-ashe@kivikakk.ee Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-03-10hw/riscv: migrate fdt field to generic MachineStateAlex Bennée
This is a mechanical change to make the fdt available through MachineState. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20210303173642.3805-3-alex.bennee@linaro.org>
2021-03-04hw/riscv: sifive_u: Change SIFIVE_U_GEM_IRQ to decimal valueBin Meng
All other peripherals' IRQs are in the format of decimal value. Change SIFIVE_U_GEM_IRQ to be consistent. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210126060007.12904-7-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-03-04hw/riscv: sifive_u: Add QSPI2 controller and connect an SD cardBin Meng
This adds the QSPI2 controller to the SoC, and connects an SD card to it. The generation of corresponding device tree source fragment is also added. Specify machine property `msel` to 11 to boot the same upstream U-Boot SPL and payload image for the SiFive HiFive Unleashed board. Note subsequent payload is stored in the SD card image. $ qemu-system-riscv64 -nographic -M sifive_u,msel=11 -smp 5 -m 8G \ -bios u-boot-spl.bin -drive file=sdcard.img,if=sd Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210126060007.12904-6-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-03-04hw/riscv: sifive_u: Add QSPI0 controller and connect a flashBin Meng
This adds the QSPI0 controller to the SoC, and connects an ISSI 25WP256 flash to it. The generation of corresponding device tree source fragment is also added. Since the direct memory-mapped mode is not supported by the SiFive SPI model, the <reg> property does not populate the second group which represents the memory mapped address of the SPI flash. With this commit, upstream U-Boot for the SiFive HiFive Unleashed board can boot on QEMU 'sifive_u' out of the box. This allows users to develop and test the recommended RISC-V boot flow with a real world use case: ZSBL (in QEMU) loads U-Boot SPL from SPI flash to L2LIM, then U-Boot SPL loads the payload from SPI flash that is combined with OpenSBI fw_dynamic firmware and U-Boot proper. Specify machine property `msel` to 6 to allow booting from the SPI flash. U-Boot spl is directly loaded via `-bios`, and subsequent payload is stored in the SPI flash image. Example command line: $ qemu-system-riscv64 -nographic -M sifive_u,msel=6 -smp 5 -m 8G \ -bios u-boot-spl.bin -drive file=spi-nor.img,if=mtd Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210126060007.12904-5-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-01-16riscv: Pass RISCVHartArrayState by pointerAlistair Francis
We were accidently passing RISCVHartArrayState by value instead of pointer. The type is 824 bytes long so let's correct that and pass it by pointer instead. Fixes: Coverity CID 1438099 Fixes: Coverity CID 1438100 Fixes: Coverity CID 1438101 Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Message-id: f3e04424723e0e222769991896cc82308fd23f76.1610751609.git.alistair.francis@wdc.com
2020-12-17riscv/opentitan: Update the OpenTitan memory layoutAlistair Francis
OpenTitan is currently only avalible on an FPGA platform and the memory addresses have changed. Update to use the new memory addresses. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 8eb65314830a75d0fea3fccf77bc45b8ddd01c42.1607982831.git.alistair.francis@wdc.com
2020-12-17hw/riscv: Use the CPU to determine if 32-bitAlistair Francis
Instead of using string compares to determine if a RISC-V machine is using 32-bit or 64-bit CPUs we can use the initalised CPUs. This avoids us having to maintain a list of CPU names to compare against. This commit also fixes the name of the function to match the riscv_cpu_is_32bit() function. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 8ab7614e5df93ab5267788b73dcd75f9f5615e82.1608142916.git.alistair.francis@wdc.com
2020-12-17hw/riscv: boot: Remove compile time XLEN checksAlistair Francis
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Tested-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Acked-by: Palmer Dabbelt <palmerdabbelt@google.com> Message-id: 51e9842dbed1acceebad7f97bd3aae69aa1ac19e.1608142916.git.alistair.francis@wdc.com
2020-12-17riscv: virt: Remove target macro conditionalsAlistair Francis
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Tested-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Acked-by: Palmer Dabbelt <palmerdabbelt@google.com> Message-id: aed1174c2efd2f050fa5bd8f524d68795b12c0e4.1608142916.git.alistair.francis@wdc.com
2020-12-17riscv: spike: Remove target macro conditionalsAlistair Francis
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Acked-by: Palmer Dabbelt <palmerdabbelt@google.com> Message-id: 04ac7fba2348c92f296a5e6a9959ac72b77ae4c6.1608142916.git.alistair.francis@wdc.com
2020-12-17hw/riscv: microchip_pfsoc: add QSPI NOR flashVitaly Wool
Add QSPI NOR flash definition for Microchip PolarFire SoC. Signed-off-by: Vitaly Wool <vitaly.wool@konsulko.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Message-id: 20201112074950.33283-1-vitaly.wool@konsulko.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-11-03hw/riscv: microchip_pfsoc: Hook the I2C1 controllerBin Meng
The latest SD card image [1] released by Microchip ships a Linux kernel with built-in PolarFire SoC I2C driver support. The device tree file includes the description for the I2C1 node hence kernel tries to probe the I2C1 device during boot. It is enough to create an unimplemented device for I2C1 to allow the kernel to continue booting to the shell. [1] ftp://ftpsoc.microsemi.com/outgoing/core-image-minimal-dev-icicle-kit-es-sd-20201009141623.rootfs.wic.gz Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1603863010-15807-11-git-send-email-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-11-03hw/riscv: microchip_pfsoc: Correct DDR memory mapBin Meng
When system memory is larger than 1 GiB (high memory), PolarFire SoC maps it at address 0x10_0000_0000. Address 0xC000_0000 and above is aliased to the same 1 GiB low memory with different cache attributes. At present QEMU maps the system memory contiguously from 0x8000_0000. This corrects the wrong QEMU logic. Note address 0x14_0000_0000 is the alias to the high memory, and even physical memory is only 1 GiB, the HSS codes still tries to probe the high memory alias address. It seems there is no issue on the real hardware, so we will have to take that into the consideration in our emulation. Due to this, we we increase the default system memory size to 1537 MiB (the minimum required high memory size by HSS) so that user gets notified an error when less than 1537 MiB is specified. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20201101170538.3732-1-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-11-03hw/riscv: microchip_pfsoc: Map the reserved memory at address 0Bin Meng
Somehow HSS needs to access address 0 [1] for the DDR calibration data which is in the chipset's reserved memory. Let's map it. [1] See the config_copy() calls in various places in ddr_setup() in the HSS source codes. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1603863010-15807-9-git-send-email-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>