aboutsummaryrefslogtreecommitdiff
path: root/include/hw/riscv
AgeCommit message (Collapse)Author
2020-11-03hw/riscv: microchip_pfsoc: Hook the I2C1 controllerBin Meng
The latest SD card image [1] released by Microchip ships a Linux kernel with built-in PolarFire SoC I2C driver support. The device tree file includes the description for the I2C1 node hence kernel tries to probe the I2C1 device during boot. It is enough to create an unimplemented device for I2C1 to allow the kernel to continue booting to the shell. [1] ftp://ftpsoc.microsemi.com/outgoing/core-image-minimal-dev-icicle-kit-es-sd-20201009141623.rootfs.wic.gz Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1603863010-15807-11-git-send-email-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-11-03hw/riscv: microchip_pfsoc: Correct DDR memory mapBin Meng
When system memory is larger than 1 GiB (high memory), PolarFire SoC maps it at address 0x10_0000_0000. Address 0xC000_0000 and above is aliased to the same 1 GiB low memory with different cache attributes. At present QEMU maps the system memory contiguously from 0x8000_0000. This corrects the wrong QEMU logic. Note address 0x14_0000_0000 is the alias to the high memory, and even physical memory is only 1 GiB, the HSS codes still tries to probe the high memory alias address. It seems there is no issue on the real hardware, so we will have to take that into the consideration in our emulation. Due to this, we we increase the default system memory size to 1537 MiB (the minimum required high memory size by HSS) so that user gets notified an error when less than 1537 MiB is specified. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20201101170538.3732-1-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-11-03hw/riscv: microchip_pfsoc: Map the reserved memory at address 0Bin Meng
Somehow HSS needs to access address 0 [1] for the DDR calibration data which is in the chipset's reserved memory. Let's map it. [1] See the config_copy() calls in various places in ddr_setup() in the HSS source codes. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1603863010-15807-9-git-send-email-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-11-03hw/riscv: microchip_pfsoc: Connect the SYSREG moduleBin Meng
Previously SYSREG was created as an unimplemented device. Now that we have a simple SYSREG module, connect it. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1603863010-15807-8-git-send-email-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-11-03hw/riscv: microchip_pfsoc: Connect the IOSCB moduleBin Meng
Previously IOSCB_CFG was created as an unimplemented device. With the new IOSCB model, its memory range is already covered by the IOSCB hence remove the previous unimplemented device creation in the SoC codes. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1603863010-15807-6-git-send-email-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-11-03hw/riscv: microchip_pfsoc: Connect DDR memory controller modulesBin Meng
Connect DDR SGMII PHY module and CFG module to the PolarFire SoC. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1603863010-15807-4-git-send-email-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-10-22hw/riscv: Load the kernel after the firmwareAlistair Francis
Instead of loading the kernel at a hardcoded start address, let's load the kernel at the next aligned address after the end of the firmware. This should have no impact for current users of OpenSBI, but will allow loading a noMMU kernel at the start of memory. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Tested-by: Bin Meng <bin.meng@windriver.com> Message-id: 46c00c4f15b42feb792090e3d74359e180a6d954.1602634524.git.alistair.francis@wdc.com
2020-10-22hw/riscv: Add a riscv_is_32_bit() functionAlistair Francis
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Tested-by: Bin Meng <bin.meng@windriver.com> Message-id: 4c6a85dfb6dd470aa79356ebc1b02f479c2758e0.1602634524.git.alistair.francis@wdc.com
2020-10-22hw/riscv: Return the end address of the loaded firmwareAlistair Francis
Instead of returning the unused entry address from riscv_load_firmware() instead return the end address. Also return the end address from riscv_find_and_load_firmware(). This tells the caller if a firmware was loaded and how big it is. This can be used to determine the load address of the next image (usually the kernel). Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Tested-by: Bin Meng <bin.meng@windriver.com> Message-id: 558cf67162342d65a23262248b040563716628b2.1602634524.git.alistair.francis@wdc.com
2020-10-22hw/riscv: sifive_u: Allow specifying the CPUAlistair Francis
Allow the user to specify the main application CPU for the sifive_u machine. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Tested-by: Bin Meng <bin.meng@windriver.com> Message-id: b8412086c8aea0eff30fb7a17f0acf2943381b6a.1602634524.git.alistair.francis@wdc.com
2020-09-18Use OBJECT_DECLARE_SIMPLE_TYPE when possibleEduardo Habkost
This converts existing DECLARE_INSTANCE_CHECKER usage to OBJECT_DECLARE_SIMPLE_TYPE when possible. $ ./scripts/codeconverter/converter.py -i \ --pattern=AddObjectDeclareSimpleType $(git grep -l '' -- '*.[ch]') Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Acked-by: Paul Durrant <paul@xen.org> Message-Id: <20200916182519.415636-6-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-18sifive_u: Rename memmap enum constantsEduardo Habkost
Some of the enum constant names conflict with the QOM type check macros (SIFIVE_U_OTP, SIFIVE_U_PRCI). This needs to be addressed to allow us to transform the QOM type check macros into functions generated by OBJECT_DECLARE_TYPE(). Rename all the constants to SIFIVE_U_DEV_*, to avoid conflicts. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20200911173447.165713-3-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-18sifive_e: Rename memmap enum constantsEduardo Habkost
Some of the enum constant names conflict with a QOM type check macro (SIFIVE_E_PRCI). This needs to be addressed to allow us to transform the QOM type check macros into functions generated by OBJECT_DECLARE_TYPE(). Rename all the constants to SIFIVE_E_DEV_*, to avoid conflicts. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20200911173447.165713-2-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-13Merge remote-tracking branch ↵Peter Maydell
'remotes/alistair/tags/pull-riscv-to-apply-20200910' into staging This PR includes multiple fixes and features for RISC-V: - Fixes a bug in printing trap causes - Allows 16-bit writes to the SiFive test device. This fixes the failure to reboot the RISC-V virt machine - Support for the Microchip PolarFire SoC and Icicle Kit - A reafactor of RISC-V code out of hw/riscv # gpg: Signature made Thu 10 Sep 2020 19:08:06 BST # gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054 # gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full] # Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054 * remotes/alistair/tags/pull-riscv-to-apply-20200910: (30 commits) hw/riscv: Sort the Kconfig options in alphabetical order hw/riscv: Drop CONFIG_SIFIVE hw/riscv: Always build riscv_hart.c hw/riscv: Move sifive_test model to hw/misc hw/riscv: Move sifive_uart model to hw/char hw/riscv: Move riscv_htif model to hw/char hw/riscv: Move sifive_plic model to hw/intc hw/riscv: Move sifive_clint model to hw/intc hw/riscv: Move sifive_gpio model to hw/gpio hw/riscv: Move sifive_u_otp model to hw/misc hw/riscv: Move sifive_u_prci model to hw/misc hw/riscv: Move sifive_e_prci model to hw/misc hw/riscv: sifive_u: Connect a DMA controller hw/riscv: clint: Avoid using hard-coded timebase frequency hw/riscv: microchip_pfsoc: Hook GPIO controllers hw/riscv: microchip_pfsoc: Connect 2 Cadence GEMs hw/arm: xlnx: Set all boards' GEM 'phy-addr' property value to 23 hw/net: cadence_gem: Add a new 'phy-addr' property hw/riscv: microchip_pfsoc: Connect a DMA controller hw/dma: Add SiFive platform DMA controller emulation ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # hw/riscv/trace-events
2020-09-09hw/riscv: Move sifive_test model to hw/miscBin Meng
This is an effort to clean up the hw/riscv directory. Ideally it should only contain the RISC-V SoC / machine codes plus generic codes. Let's move sifive_test model to hw/misc directory. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1599129623-68957-10-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09hw/riscv: Move sifive_uart model to hw/charBin Meng
This is an effort to clean up the hw/riscv directory. Ideally it should only contain the RISC-V SoC / machine codes plus generic codes. Let's move sifive_uart model to hw/char directory. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1599129623-68957-9-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09hw/riscv: Move riscv_htif model to hw/charBin Meng
This is an effort to clean up the hw/riscv directory. Ideally it should only contain the RISC-V SoC / machine codes plus generic codes. Let's move riscv_htif model to hw/char directory. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1599129623-68957-8-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09hw/riscv: Move sifive_plic model to hw/intcBin Meng
This is an effort to clean up the hw/riscv directory. Ideally it should only contain the RISC-V SoC / machine codes plus generic codes. Let's move sifive_plic model to hw/intc directory. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1599129623-68957-7-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09hw/riscv: Move sifive_clint model to hw/intcBin Meng
This is an effort to clean up the hw/riscv directory. Ideally it should only contain the RISC-V SoC / machine codes plus generic codes. Let's move sifive_clint model to hw/intc directory. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1599129623-68957-6-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09hw/riscv: Move sifive_gpio model to hw/gpioBin Meng
This is an effort to clean up the hw/riscv directory. Ideally it should only contain the RISC-V SoC / machine codes plus generic codes. Let's move sifive_gpio model to hw/gpio directory. Note this also removes the trace-events in the hw/riscv directory, since gpio is the only supported trace target in that directory. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1599129623-68957-5-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09hw/riscv: Move sifive_u_otp model to hw/miscBin Meng
This is an effort to clean up the hw/riscv directory. Ideally it should only contain the RISC-V SoC / machine codes plus generic codes. Let's move sifive_u_otp model to hw/misc directory. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1599129623-68957-4-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09hw/riscv: Move sifive_u_prci model to hw/miscBin Meng
This is an effort to clean up the hw/riscv directory. Ideally it should only contain the RISC-V SoC / machine codes plus generic codes. Let's move sifive_u_prci model to hw/misc directory. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1599129623-68957-3-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09hw/riscv: Move sifive_e_prci model to hw/miscBin Meng
This is an effort to clean up the hw/riscv directory. Ideally it should only contain the RISC-V SoC / machine codes plus generic codes. Let's move sifive_e_prci model to hw/misc directory. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1599129623-68957-2-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09hw/riscv: sifive_u: Connect a DMA controllerBin Meng
SiFive FU540 SoC integrates a platform DMA controller with 4 DMA channels. This connects the exsiting SiFive PDMA model to the SoC, and adds its device tree data as well. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1598924352-89526-17-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09hw/riscv: clint: Avoid using hard-coded timebase frequencyBin Meng
At present the CLINT timestamp is using a hard-coded timebase frequency value SIFIVE_CLINT_TIMEBASE_FREQ. This might not be true for all boards. Add a new 'timebase-freq' property to the CLINT device, and update various functions to accept this as a parameter. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1598924352-89526-16-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09hw/riscv: microchip_pfsoc: Hook GPIO controllersBin Meng
Microchip PolarFire SoC integrates 3 GPIOs controllers. It seems enough to create unimplemented devices to cover their register spaces at this point. With this commit, QEMU can boot to U-Boot (2nd stage bootloader) all the way to the Linux shell login prompt, with a modified HSS (1st stage bootloader). For detailed instructions on how to create images for the Icicle Kit board, please check QEMU RISC-V WiKi page at: https://wiki.qemu.org/Documentation/Platforms/RISCV Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <1598924352-89526-15-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09hw/riscv: microchip_pfsoc: Connect 2 Cadence GEMsBin Meng
Microchip PolarFire SoC integrates 2 Candence GEMs to provide IEEE 802.3 standard-compliant 10/100/1000 Mbps ethernet interface. On the Icicle Kit board, GEM0 connects to a PHY at address 8 while GEM1 connects to a PHY at address 9. The 2nd stage bootloader (U-Boot) is using GEM1 by default, so we must specify 2 '-nic' options from the command line in order to get a working ethernet. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <1598924352-89526-14-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09hw/riscv: microchip_pfsoc: Connect a DMA controllerBin Meng
On the Icicle Kit board, the HSS firmware utilizes the on-chip DMA controller to move the 2nd stage bootloader in the system memory. Let's connect a DMA controller to Microchip PolarFire SoC. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1598924352-89526-11-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09hw/riscv: microchip_pfsoc: Connect a Cadence SDHCI controller and an SD cardBin Meng
Microchip PolarFire SoC integrates one Cadence SDHCI controller. On the Icicle Kit board, one eMMC chip and an external SD card connect to this controller depending on different configuration. As QEMU does not support eMMC yet, we just emulate the SD card configuration. To test this, the Hart Software Services (HSS) should choose the SD card configuration: $ cp boards/icicle-kit-es/def_config.sdcard .config $ make BOARD=icicle-kit-es The SD card image can be built from the Yocto BSP at: https://github.com/polarfire-soc/meta-polarfire-soc-yocto-bsp Note the generated SD card image should be resized before use: $ qemu-img resize /path/to/sdcard.img 4G Launch QEMU with the following command: $ qemu-system-riscv64 -nographic -M microchip-icicle-kit -sd sdcard.img Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1598924352-89526-9-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09hw/riscv: microchip_pfsoc: Connect 5 MMUARTsBin Meng
Microchip PolarFire SoC has 5 MMUARTs, and the Icicle Kit board wires 4 of them out. Let's connect all 5 MMUARTs. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1598924352-89526-7-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09hw/riscv: Initial support for Microchip PolarFire SoC Icicle Kit boardBin Meng
This is an initial support for Microchip PolarFire SoC Icicle Kit. The Icicle Kit board integrates a PolarFire SoC, with one SiFive's E51 plus four U54 cores and many on-chip peripherals and an FPGA. For more details about Microchip PolarFire Soc, please see: https://www.microsemi.com/product-directory/soc-fpgas/5498-polarfire-soc-fpga Unlike SiFive FU540, the RISC-V core resect vector is at 0x20220000. The following perepherals are created as an unimplemented device: - Bus Error Uint 0/1/2/3/4 - L2 cache controller - SYSREG - MPUCFG - IOSCBCFG More devices will be added later. The BIOS image used by this machine is hss.bin, aka Hart Software Services, which can be built from: https://github.com/polarfire-soc/hart-software-services To launch this machine: $ qemu-system-riscv64 -nographic -M microchip-icicle-kit The memory is set to 1 GiB by default to match the hardware. A sanity check on ram size is performed in the machine init routine to prompt user to increase the RAM size to > 1 GiB when less than 1 GiB ram is detected. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1598924352-89526-5-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09hw/riscv: hart: Add a new 'resetvec' propertyBin Meng
RISC-V machines do not instantiate RISC-V CPUs directly, instead they do that via the hart array. Add a new property for the reset vector address to allow the value to be passed to the CPU, before CPU is realized. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <1598924352-89526-3-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09Use DECLARE_*CHECKER* macrosEduardo Habkost
Generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=TypeCheckMacro $(git grep -l '' -- '*.[ch]') Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-12-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-13-ehabkost@redhat.com> Message-Id: <20200831210740.126168-14-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-09Move QOM typedefs and add missing includesEduardo Habkost
Some typedefs and macros are defined after the type check macros. This makes it difficult to automatically replace their definitions with OBJECT_DECLARE_TYPE. Patch generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]') which will split "typdef struct { ... } TypedefName" declarations. Followed by: $ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \ $(git grep -l '' -- '*.[ch]') which will: - move the typedefs and #defines above the type check macros - add missing #include "qom/object.h" lines if necessary Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-9-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-10-ehabkost@redhat.com> Message-Id: <20200831210740.126168-11-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-08-27opentitan: Rename memmap enum constantsEduardo Habkost
Some of the enum constant names conflict with the QOM type check macros (IBEX_PLIC, IBEX_UART). This needs to be addressed to allow us to transform the QOM type check macros into functions generated by OBJECT_DECLARE_TYPE(). Rename all the constants to IBEX_DEV_*, to avoid conflicts. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Tested-By: Roman Bolshakov <r.bolshakov@yadro.com> Message-Id: <20200825192110.3528606-8-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-08-25hw/riscv: virt: Allow creating multiple NUMA socketsAnup Patel
We extend RISC-V virt machine to allow creating a multi-socket machine. Each RISC-V virt machine socket is a NUMA node having a set of HARTs, a memory instance, a CLINT instance, and a PLIC instance. Other devices are shared between all sockets. We also update the generated device tree accordingly. By default, NUMA multi-socket support is disabled for RISC-V virt machine. To enable it, users can use "-numa" command-line options of QEMU. Example1: For two NUMA nodes with 2 CPUs each, append following to command-line options: "-smp 4 -numa node -numa node" Example2: For two NUMA nodes with 1 and 3 CPUs, append following to command-line options: "-smp 4 -numa node -numa node -numa cpu,node-id=0,core-id=0 \ -numa cpu,node-id=1,core-id=1 -numa cpu,node-id=1,core-id=2 \ -numa cpu,node-id=1,core-id=3" The maximum number of sockets in a RISC-V virt machine is 8 but this limit can be changed in future. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Atish Patra <atish.patra@wdc.com> Message-Id: <20200616032229.766089-6-anup.patel@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-08-25hw/riscv: spike: Allow creating multiple NUMA socketsAnup Patel
We extend RISC-V spike machine to allow creating a multi-socket machine. Each RISC-V spike machine socket is a NUMA node having a set of HARTs, a memory instance, and a CLINT instance. Other devices are shared between all sockets. We also update the generated device tree accordingly. By default, NUMA multi-socket support is disabled for RISC-V spike machine. To enable it, users can use "-numa" command-line options of QEMU. Example1: For two NUMA nodes with 2 CPUs each, append following to command-line options: "-smp 4 -numa node -numa node" Example2: For two NUMA nodes with 1 and 3 CPUs, append following to command-line options: "-smp 4 -numa node -numa node -numa cpu,node-id=0,core-id=0 \ -numa cpu,node-id=1,core-id=1 -numa cpu,node-id=1,core-id=2 \ -numa cpu,node-id=1,core-id=3" The maximum number of sockets in a RISC-V spike machine is 8 but this limit can be changed in future. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Atish Patra <atish.patra@wdc.com> Message-Id: <20200616032229.766089-5-anup.patel@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-08-25hw/riscv: Add helpers for RISC-V multi-socket NUMA machinesAnup Patel
We add common helper routines which can be shared by RISC-V multi-socket NUMA machines. We have two types of helpers: 1. riscv_socket_xyz() - These helper assist managing multiple sockets irrespective whether QEMU NUMA is enabled/disabled 2. riscv_numa_xyz() - These helpers assist in providing necessary QEMU machine callbacks for QEMU NUMA emulation Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Atish Patra <atish.patra@wdc.com> Message-Id: <20200616032229.766089-4-anup.patel@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-08-25hw/riscv: Allow creating multiple instances of PLICAnup Patel
We extend PLIC emulation to allow multiple instances of PLIC in a QEMU RISC-V machine. To achieve this, we remove first HART id zero assumption from PLIC emulation. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20200616032229.766089-3-anup.patel@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-08-25hw/riscv: Allow creating multiple instances of CLINTAnup Patel
We extend CLINT emulation to allow multiple instances of CLINT in a QEMU RISC-V machine. To achieve this, we remove first HART id zero assumption from CLINT emulation. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Message-Id: <20200616032229.766089-2-anup.patel@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-08-21hw/riscv: sifive_u: Add a dummy L2 cache controller deviceBin Meng
It is enough to simply map the SiFive FU540 L2 cache controller into the MMIO space using create_unimplemented_device(), with an FDT fragment generated, to make the latest upstream U-Boot happy. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1595227748-24720-1-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-13riscv: Add opensbi firmware dynamic supportAtish Patra
OpenSBI is the default firmware in Qemu and has various firmware loading options. Currently, qemu loader uses fw_jump which has a compile time pre-defined address where fdt & kernel image must reside. This puts a constraint on image size of the Linux kernel depending on the fdt location and available memory. However, fw_dynamic allows the loader to specify the next stage location (i.e. Linux kernel/U-Boot) in memory and other configurable boot options available in OpenSBI. Add support for OpenSBI dynamic firmware loading support. This doesn't break existing setup and fw_jump will continue to work as it is. Any other firmware will continue to work without any issues as long as it doesn't expect anything specific from loader in "a2" register. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Tested-by: Bin Meng <bin.meng@windriver.com> Message-Id: <20200701183949.398134-4-atish.patra@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-13RISC-V: Copy the fdt in dram instead of ROMAtish Patra
Currently, the fdt is copied to the ROM after the reset vector. The firmware has to copy it to DRAM. Instead of this, directly copy the device tree to a pre-computed dram address. The device tree load address should be as far as possible from kernel and initrd images. That's why it is kept at the end of the DRAM or 4GB whichever is lesser. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Tested-by: Bin Meng <bin.meng@windriver.com> Message-Id: <20200701183949.398134-3-atish.patra@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-13riscv: Unify Qemu's reset vector code pathAtish Patra
Currently, all riscv machines except sifive_u have identical reset vector code implementations with memory addresses being different for all machines. They can be easily combined into a single function in common code. Move it to common function and let all the machines use the common function. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Tested-by: Bin Meng <bin.meng@windriver.com> Message-Id: <20200701183949.398134-2-atish.patra@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-06-19hw/riscv: sifive_u: Add a dummy DDR memory controller deviceBin Meng
It is enough to simply map the SiFive FU540 DDR memory controller into the MMIO space using create_unimplemented_device(), to make the upstream U-Boot v2020.07 DDR memory initialization codes happy. Note we do not generate device tree fragment for the DDR memory controller. Since the controller data in device tree consumes a very large space (see fu540-hifive-unleashed-a00-ddr.dtsi in the U-Boot source), and it is only needed by U-Boot SPL but not any operating system, we choose not to generate the fragment here. This also means when testing with U-Boot SPL, the device tree has to come from U-Boot SPL itself, but not the one generated by QEMU on the fly. The memory has to be set to 8GiB to match the real HiFive Unleashed board when invoking QEMU (-m 8G). With this commit, QEMU can boot U-Boot SPL built for SiFive FU540 all the way up to loading U-Boot proper from MMC: $ qemu-system-riscv64 -nographic -M sifive_u,msel=6 -m 8G -bios u-boot-spl.bin U-Boot SPL 2020.07-rc3-00208-g88bd5b1 (Jun 08 2020 - 20:16:10 +0800) Trying to boot from MMC1 Unhandled exception: Load access fault EPC: 0000000008009be6 TVAL: 0000000010050014 The above exception is expected because QSPI is unsupported yet. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1592268641-7478-6-git-send-email-bmeng.cn@gmail.com Message-Id: <1592268641-7478-6-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-06-19hw/riscv: sifive_u: Support different boot source per MSEL pin stateBin Meng
SiFive FU540 SoC supports booting from several sources, which are controlled using the Mode Select (MSEL[3:0]) pins on the chip. Typically, the boot process runs through several stages before it begins execution of user-provided programs. The SoC supports booting from memory-mapped QSPI flash, which is how start_in_flash property is used for at present. This matches MSEL = 1 configuration (QSPI0). Typical booting flows involve the Zeroth Stage Boot Loader (ZSBL). It's not necessary for QEMU to implement the full ZSBL ROM codes, because we know ZSBL downloads the next stage program into the L2 LIM at address 0x8000000 and executes from there. We can bypass the whole ZSBL execution and use "-bios" to load the next stage program directly if MSEL indicates a ZSBL booting flow. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1592268641-7478-4-git-send-email-bmeng.cn@gmail.com Message-Id: <1592268641-7478-4-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-06-19hw/riscv: sifive_u: Add a new property msel for MSEL pin stateBin Meng
On SiFive FU540 SoC, the value stored at physical address 0x1000 stores the MSEL pin state that is used to control the next boot location that ROM codes jump to. Add a new property msel to sifive_u machine for this. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1591625864-31494-12-git-send-email-bmeng.cn@gmail.com Message-Id: <1591625864-31494-12-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-06-19hw/riscv: sifive_u: Hook a GPIO controllerBin Meng
SiFive FU540 SoC integrates a GPIO controller with 16 GPIO lines. This hooks the exsiting SiFive GPIO model to the SoC, and adds its device tree data as well. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1591625864-31494-8-git-send-email-bmeng.cn@gmail.com Message-Id: <1591625864-31494-8-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-06-19hw/riscv: sifive_gpio: Add a new 'ngpio' propertyBin Meng
Add a new property to represent the number of GPIO pins supported by the GPIO controller. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1591625864-31494-7-git-send-email-bmeng.cn@gmail.com Message-Id: <1591625864-31494-7-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-06-19hw/riscv: sifive_gpio: Clean up the codesBin Meng
Do various minor clean-ups to the exisiting codes for: - coding convention conformance - remove unnecessary blank lines - spell SiFive correctly Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1591625864-31494-6-git-send-email-bmeng.cn@gmail.com Message-Id: <1591625864-31494-6-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>